Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Date : 04-10-2019
Subject : Tensile test on 2 coated M16x50 hex bolts class 10.9; DIN 933
sheradized
Your Code : IO190045
Laboratory Number : 193644
Sampling : 27-09-2019 at Diemen by HBS Solutions B.V.
Period of Investigation : 02-10-2019 until 04-10-2019
Sample Data
Sample No Sample Type Sample Code Date of Acceptance
1 grade 10.9 DIN 933 Sheradized M16x50 Hex Bolt 02-10-2019
2 grade 10.9 DIN 933 Sheradized M16x50 Hex Bolt 02-10-2019
Methods
Analysis Method Q s
Tensile Test Full Bolt ISO 6892-1; ISO 898-1
Q = ISO 17025 accredited, s=subcontracted, Qs = subcontractor (SGS Germany) ISO 17025 accredited
Results
Page 1 of 2 Keurap04
Unless otherwise agreed, orders are executed in accordance with the latest version of the SGS INTRON B.V. General
Conditions. Upon simple request the conditions will again be sent to you.
Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Without written permission
from SGS INTRON Laboratory, this report may only be reproduced entirely.
The results are only related to the investigated samples.The scope of the NEN-EN-ISO/IEC 17025 accreditation involves all
results belonging to analyses marked with Q at the methods section.
The used significances of the results represent their uncertainty. Other performance characteristics are available upon request.
SGS INTRON Laboratory
P.O. box 5187 t +31 (0) 88 - 2 145 204
6130 PD Sittard f +31 (0) 88 - 2 144 609
The Netherlands