Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Data Sheet
3M™ Protective Coverall 4565
Description Typical Applications
The 3M Protective Coverall 4565 is designed to help protect against hazardous
™
Typical applications may include exposure to radioactive particles, exposure to
dusts (Type 5), light liquid splashes (Type 6), and low pressure liquid sprays (Type 4). non-infectious blood and bodily fluids, water reactive powder handling, tank
cleaning and maintenance, pharmaceutical, cleanroom applications, and general
The key features include: industrial clean-up.
• Constructed of a low-linting, non-woven, laminated material with anti-static In all cases a risk assessment should be carried out. Users must be trained and have
coating on both sides read all User Instructions. Use limitations and performance data should be considered
• Knit cuffs with elasticized waist and ankles for increased wearer comfort and to ascertain the protection required. If in doubt, contact a safety professional.
freedom of movement
• Three panel hood design for compatibility with complementary PPE Performance
• Two-way zipper with sealable storm flap The table below shows the performance of this product when tested under
laboratory conditions. Please note that the tests may not reflect the reality of
• Taped seams to help provide additional protection use and do not account for factors such as excessive heat and mechanical wear.
• Offers protection from certain biological contaminants (tested according to Class**/
Test Standard Result Standard*
EN 14126). Consult class results table. Result
ASTM D4157
Materials Abrasion
Cycles to Rupture
850 EN 530 Class 1
• Suit: Polypropylene/Polyethylene Laminate Film, White Flex Cracking ISO 7854 Class 1
ASTM D5733 (warp direction/ 16 lbf /
• Zipper: Nylon on Polyester Braid Tear Resistance Trapezoidal
fill direction) 8 lbf
ISO 9073-4 Class 1