Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
XCAL-M
Presentation to Sprint
by Accuver Americas
Initial Setup
License
Voice Call
Data Call
Scanner
UE Lock
Helpdesk
2
Galaxy S4
Initial Setup Accuver
Setup
• Scanner (page27)
• Mobiles
1. Physical 2. Port Setting 3. Auto Call
• License Download(page4) connection of Configure each device Various call scenarios
• Launch XCAL-M UEs, GPS, scanner to can be configured by
Port Setting PC and License for example: FTP, UDP,
Download Ping, HTTP
• Voice
• Data
• Scanner
5. Select LTE-Q
Autocall Scenario Graph parameter
• Voice windows, signaling
messages, etc.
• Data
Run 4. Open menus to display
measurements in real time
• Open Menus 3
• Select Parameters
License Accuver
Network License
• Admin
• Network License User
License Manager
Procedure
Guidelines
Common error messages
Accuver
• After the zip file is downloaded copy it into a new folder on the Desktop.
6
Accuver
2. Open the new folder and run Network License
Manager Application. 2.a
a. Enter URL 2.b
http://sprint.license.accuver.com/keymgr/ 2.c
b. Enter ID
c. Enter Password
d. Click OK 5.b 5.c
3. The following options are available:
a. Download: select this to download a 2.d 5.a
license
i. The progress bar is displayed
ii. Success to download message
b. Restore: select this to return a license
after downloaded
c. Extend: select this to extend a license when
expired.
Common Error Messages Accuver
1. No Download option is available
• If Download button is grayed out then it means that the User account has been downloaded in
another laptop PC.
• Please check if this license can be restored from the other user laptop or contact Sprint Admin to
assign new user account.
2. Error
• You do not have Network License indicates also that the user account is not available because it has
already been downloaded.
• Please check if this license can be restored from the other user laptop or contact Sprint Admin to
assign new user account.
Accuver
Error Code: 1
• Incorrect ID or Password, check the ID or Password and try again.
• This error is also triggered when the User account status has been changed to inactive. Contact the Sprint
admin and request new user account or change status back to active (connect)
Error Code: 4
• Unavailable License Key! means that in the License Key Info Management Max Count = Now Use Count
• Currently there is no license available to download until at least one user restores the license
• If downloading a license is urgently needed then please contact the Sprint Network License Admin
Voice Call Accuver
Device Configuration
Port Setting
Autocall Scenario Setting
Call Statistics
Signaling Message
• Filtering
• LTE (RRC, NAS)
• CDMA and EVDO
eCSFB
• Extended Service Request Message
• LTE rrcConnectionRelease
• Fallback encapsulated messages
• LTE MobilityfromEUTRACommand
• CSFB Info and Statistics 10
Device configuration Accuver
11
Port Setting Accuver
1) Open Port Setting
2) Select Mobile 1 and click on the Mobile Alias Setting to configure it by following the steps on next page.
Click on Mobile Alias Setting to Create a mobile alias interface
3) Select the Interface created in the Mobile Alias Setting and assign the ports
• Interface: Galaxy S4 Voice
• DM Port: COM 6 Samsung Mobile USB Serial
• Modem: COM 8 Samsung Mobile USB Modem
AT Port: Not required
•
• ADB Device: select ADB Port
12
Mobile Alias Setting Accuver
1. Enter Interface name
a. Select Chip Type
b. Select Data Service Type = Modem
c. Select Add/Edit
2. Select Log mask = LTE Recommend and Add/Edit
1.
a.
2.
b.
c. 13
Autocall Scenario Setting Accuver
14
Call Statistics Accuver
Events
Current Scenario
• XCAL-M performs
Statistics Info call event
• Total procedures
• Success • Start event means
• Setup Failures that the previous
• Drops event has been
• End by C.P. successfully
and by M.R. completed
Call • For an example,
• No. of Calls Traffic Setup Start
• Start and End Time event means Traffic
• Result Start has been
• Cause initiated and the
• Scenario previous event,
Detail Message Setup, was
• Status successful
• Call Start
• Call Connected
• Traffic Start
15
• Release start
Signaling Message Accuver
16
eCSFB Call Accuver
To make eCSFB call select Common tab from the Autocall setup window. For call origination select ADB Command
For Dial up and Call End. For Mobile to Mobile call select ADB Command and Send Key for Pick up.
17
Extended Service Request message Accuver
This parameter identifies that an extended service request was performed due to a mobile
Originating fallback
18
LTE rrcConnectionRelease (depending on network) Accuver
RedirectedCarrierInfo value carries ARFCN-ValueUtRA which indicates the target UTRA
Frequency that the UE shall tune to (UE releases context and tunes to target UTRAN frequency)
Menu->Message->Signaling message
LTE
Detail message
1xRTT
19
Fall back encapsulated messages Accuver
20
LTE MobilityFromEUTRACommand Accuver
After mobile receives RRC Mobility FROM E-UTRA message it will leave the E-UTRAN
Radio to start acquiring the 1xRTT traffic channel
21
CSFB Info and Statistics Accuver
Menu->LTE KPI(SIG)->
LTE CSFB Statistics
LTE CSFB Info
ESR Attempts for MO and MT
Calls
Transition detail info
22
Data Call Accuver
Device Configuration
• USB Setting
Port Setting
• Mobile Alias Setting
Autocall Scenario Setting
• FTP
Network Entry
Call Statistics
Signaling
Packet Message
• Iperf
Iperf Graph
Iperf Statistics
23
Device configuration Accuver
24
Port Setting Accuver
1) Open Port Setting
2) Select Mobile 1 and click on the Mobile Alias Setting to configure it by following the
Steps on next page. Click on Mobile Alias Setting to Create a mobile alias interface
3) Select the Interface created in the Mobile Alias Setting and assign the ports
• Interface: Galaxy S4 (RNDIS)
• DM Port: COM 17 Samsung Mobile USB Serial
• Net Adpt.: Ethernet 2 Samsung Mobile
AT Port: COM 14 Samsung Mobile USB Modem
•
• ADB Device: Not required 25
Mobile Alias Setting Accuver
1. Enter Interface name
a. Select Chip Type
b. Select Data Service Type = USB Tethering
c. Select Add/Edit
2. Select Log mask = LTE Recommend and Add/Edit
1.
a.
2.
b.
26
c.
Autocall Scenario: FTP Call Accuver
1. In the Autocall Scenario Setting window select the FTP tab
2. Enter FTP Host, Login ID, Password, Directory and File information
3. Enter Idle, Setup, T. Setup, Traffic Time and Call Count
4. Select Autocall with Network Entry if Attach-Detach is required*
1) FTP Call Events
3)
2)
4)
*Must select Attach & Detach Network Entry Support in the Mobile Alias Setting
Call Statistics Accuver
Statistics
• Total, Success, Setup
Fail, Traffic Fail, Drop,
Pending, Time Out,
Error
Call
• Start and End Time,
Result, Cause,
Scenario, Call Type,
App Throughput
Detail Message
• Event Status like
Traffic Start, Release
Start, Release end, FTP
Connecting
Signaling Message Accuver
Menu->Message->Signaling Message
1. Use Filtering option for
• Separating LTE, EVDO, CDMA
messages
• Observe Attach/Detach events
• Handover and drop events Detail
All Message view
• Other events based on signaling Message
2. Pause/Resume button View
3. Export option
4. Enter Packet and Buffer size, UDP Throughput Mode UDP/TCP setting
UP/DOWN/DUAL setting
5. Select Use Iperf Daemon (UDP or TCP) option UP : Client (transmitter: DM) and Server (receiver:
Daemon)
Direction DOWN: Client (transmitter: Daemon) and Server
(receiver: DM)
DUAL: DM controls both transmit and receive. (-d option
of iperf)
Daemon data
32
Iperf Statistics Accuver
XCAL-M result and Daemon status can be monitored from Menu->Statistics/Status->Iperf Statistics
Server listening
(XCAL-M and
Mobile side)
Client connecting to
Mobile IP address
108.119.29.39
To send UDP packets
(Server-daemon side)
33
Scanner Accuver
IBflex
• Features
Scanner Setup
• Driver and SeeGull Assistant
Port Setting
• Alias Setting
LTE Top N Signal Scan Setting
Scanner Measurements
• LTE Enhance Top N (Graph)
• CDMA Top N Scan
• EVDO Top N Scan
• RSSI Scan
Scanner Info 34
Scanner Accuver
35
*MIMO, Bluetooth, GPS holdover are scanner optional features.
Scanner Setup Accuver
1. Driver Installation
• Ibflex driver is available inside XCAL-M ->IBFlex(PCTEL) folder
• SeeGull Assistant is also available. Use SeeGull Assistant to upgrade scanner options
Port Setting Accuver
1. Setup the Scanner
• Scanner drivers must be installed prior to connecting unit to laptop PC
4.
5. 6.
a. b.
c.
39
LTE Enhanced Top N(Graph) Accuver
• Select LTE Enhanced Top N(Graph)
• Right click and configure the LTE Top N Pilot
Setting
• Select Band Class and enter channel
40
CDMA Top N Scan Accuver
• Select CDMA Top N Scan
• Right click and configure the CDMA Top N Pilot Setting
• Select Band Class and enter channel
41
EVDO TopN Scan Accuver
• Select EVDO Top N Scan
• Right click and configure the EVDO Top N Pilot Setting
• Select Band Class and enter channel
42
RSSI Scan Accuver
43
Scanner Info Accuver
44
UE Lock: NV Read/Write(Version2) Accuver
Back up export
RAT Lock
2G/3G Band Lock
LTE Band Lock
45
NV Read Backup (Export) Accuver
• It is recommended to backup settings before any changes.
• Select All NV Read Backup(Export) to save configuration
• Select All NV Read Restore(Import) to load saved configuration
46
RAT LOCK Accuver
How to lock UE to specific RAT (1/2)
1. In RAT Lock section press Read button, XCAL will request Mode Preference state from the UE
2. Select wanted Mode Preference. In the following example, LTE Only (30) is mode of the UE that has been read
by XCAL
3. Press Write button, XCAL sends request to write new network mode
1 3
47
Accuver
How to lock UE to specific RAT (2/2)
4. Request information can be viewed from the console below. In the following example, the network mode from
LTE Only (30) has been requested to change to WCDMA Only (14)
5. Restart the device. After restarting mobile the UE network mode will be set as the requested Mode Preference
48
2G/3G BAND LOCK Accuver
How to lock UE to specific 2G/3G Band (1/2)
1. In 2G/3G Band Lock section press Read button, XCAL will request state of Band Preference from the UE
2. Select wanted Band Preference
3. Press Write button, XCAL requests to write new band preference for the UE
1 3
49
Accuver
How to lock UE to specific 2G/3G Band (2/2)
4. Request information can be viewed from the console below. In the following example, band preference All
Band has been requested to change to WCDMA 2100MHz
5. Restart the device and UE band preference will be set as requested
4
50
LTE BAND LOCK Accuver
How to lock UE to specific LTE Band
• LTE Band lock forcing is similar to 2G/3G Band lock procedure (slides 6-7)
51
Help Desk Accuver
52
Samsung Galaxy S4 USB Tethering Accuver
The following is a known issue with SPH-L720T Android version 4.4.2.
If a device has USB Tethering enable and if rebooting the mobile is done then it will not allow to enable USB
Tethering.
The work around is to change the USB Settings from RNDIS+DM+MODEM to other option like RMNET+DM+MODEM
and then return to RNDIS+DM+MODEM. Then select USB Tethering
2.
1.
53
Accuver
Accuver Americas Technical Support can be reached at:
Phone: 469-241-6100, option 2
E-mail: support.usa@accuver.com
End of Presentation
Thank You