Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ALLOWABLE A307-7-12-0038
PIPING LOADS Rev. 0
Page 1 of 6
ALLOWABLE
PIPING LOADS
Format No. EIL 1641-1924 Rev. 1 Copyright EIL All rights reserved
Page 77 of 233
DOCUMENT No.
ALLOWABLE A307-7-12-0038
PIPING LOADS Rev. 0
Page 2 of 6
NOTES:
1.1 Each process nozzle of equipment shall be analysed for the loads provided in this
standard.
1.2 These loads shall be considered to be acting simultaneously with internal/external design
pressure. Allowable stress shall be as per applicable Design code.
1.3 Stress calculations shall be carried out as per WRC Bulletin No. 107/297. WRC 107 shall
be used for Nozzles on Dished ends and WRC 297 shall be used for Nozzles on
Cylindrical Shell.
1.4 In case of failure due to WRC, FEM analysis/PD 5500 analysis can be carried out to
establish the adequacy of provided configuration.
Format No. EIL 1641-1924 Rev. 1 Copyright EIL All rights reserved
Page 78 of 233
DOCUMENT No.
ALLOWABLE A307-7-12-0038
PIPING LOADS Rev. 0
Page 3 of 6
Format No. EIL 1641-1924 Rev. 1 Copyright EIL All rights reserved
Page 79 of 233
DOCUMENT No.
ALLOWABLE A307-7-12-0038
PIPING LOADS Rev. 0
Page 4 of 6
NOZZLE SIZE FA FL FC MT ML MC
(NB)
Format No. EIL 1641-1924 Rev. 1 Copyright EIL All rights reserved
Page 80 of 233
DOCUMENT No.
ALLOWABLE A307-7-12-0038
PIPING LOADS Rev. 0
Page 5 of 6
ALL CLASSES
NOZZLE FA FL FC MT ML MC
SIZE (NB)
Format No. EIL 1641-1924 Rev. 1 Copyright EIL All rights reserved
Page 81 of 233
DOCUMENT No.
ALLOWABLE A307-7-12-0038
PIPING LOADS Rev. 0
Page 6 of 6
1.5 For nozzle sizes higher than that tabulated above vendor to calculate nozzle loads as per
tables below:
ALL CLASSES
NOZZLE
FA FL FC MT ML MC
SIZE (NB)
ALL CLASSES
NOZZLE
FA FL FC MT ML MC
SIZE (NB)
F NOZZLE IN INCH.
Format No. EIL 1641-1924 Rev. 1 Copyright EIL All rights reserved
Page 82 of 233