Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SUMMARY OF FINDINGS
The findings in the assembly multi-pump test rig were obtained through testing and
evaluation of two connections , A series and parallel connection with two similar pumps Bolzano
At rated RPM of the pumps, the volume flow rate from series and parallel connection are
recorded. From these data the volume flow rate were attained when series and parallel
m3
connection in the experiment. The series connection has a flow rate of 0.0001002 while the
sec
m3
parallel connection has a volume flow rate of 0.001503 .
sec
Total dynamic head of the pumps were calculated based on the static head added by their
pressure head differences and lastly added its head loss due to friction. It is shown that when
series connection can doubled its total dynamic head, at Pump 1 was at 21.65 ft. and at Pump 2
the previous total dynamic head was doubled at 50.18ft and constant volume flow rate. , when
parallel connection have a constant total dynamic but have a little discrepancy due to head loss
due to friction but have more volume flow rate at Pump 1 was at 72.68 ft. and at Pump 2 was at
72.67 ft.
The water power and efficiencies of the two connection are directly proportional with
their volume flow rate, the volume rate affect as shown in the tables. The series connection has a
water power of 0.205 hp with an efficiency of 20.5%, while the parallel connection has a water
CONCLUSION
the primary objective of the study. The test rig was evaluated and tested using two similar pumps
1. The assembly of the multi-pump test rig can test two pumps at the same time, with
pipe suction diameter 2 inches, 1 inch and discharge diameter 1 inch. The total project
cost of assembling and fabricating of the multi-pump test rig is PHP. 26,491.
2. The multi-pump test rig gives compact data in attaining pump properties. Based on
the results of the multi-pump test rig by testing the series and parallel connection, it
gives as total dynamic head that are similar and have the exactly the same graphical
presentation in parallel and volume flow rate which the same in series. That are
obtained from the standards. Also efficiencies and specific speed of the pumps that
3. In addition , using the multi-pump test rig you can perform experiments regardings
pumps and pipelines, This includes experiments on pump Total Dynamic Head ,