Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Description
Issue 06
Date 2018-09-12
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
1 Overview...........................................................................................................................................1
1.1 Appearance.....................................................................................................................................................................1
1.2 Physical Ports.................................................................................................................................................................2
2 Technical Specifications..............................................................................................................4
2.1 Frequency Band..............................................................................................................................................................4
2.2 Capacity..........................................................................................................................................................................4
2.3 Receiver Sensitivity........................................................................................................................................................5
2.4 Typical Output Power.....................................................................................................................................................6
2.5 Power Consumption.......................................................................................................................................................9
2.6 Input Power..................................................................................................................................................................10
2.7 Equipment Specifications.............................................................................................................................................10
2.8 CPRI Port Specifications..............................................................................................................................................10
2.9 Environment Specifications..........................................................................................................................................11
1 Overview
1.1 Appearance
Figure 1.1 shows the appearance of the RRU5905/RRU5905w.
2 Technical Specifications
The RRU5905/5905w hardware and software versions must match. For the version mapping,
see 3900 Series Base Station Software and Hardware Compatibility Description.
2.2 Capacity
Table 2.3 Single-mode capacity
Mode Capacity
LTE (FDD) Each RRU5905 (900 MHz) supports 3 carriers and the LTE (FDD)
bandwidth can be 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, or 20
MHz.
Each RRU5905/RRU5905w (1800 MHz) supports 2 carriers and the LTE
(FDD) bandwidth can be 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, or
20 MHz.
LTE (NB-IoT) Each RRU5905/RRU5905w supports one carrier.
The receiver sensitivity of GSM, as recommended in 3GPP TS 51.021, is measured at the antenna
connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does not
exceed 0.02.
The receiver sensitivity of UMTS, as recommended in 3GPP TS 25.104, is measured in the entire
operating band at the antenna connector on condition that the channel rate reaches 12.2 kbit/s and
the bit error rate (BER) is not higher than 0.001.
The receiver sensitivity of LTE (FDD), as recommended in 3GPP TS 36.104, is measured under a 5
MHz channel bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
LTE (NB-IoT) receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 200
KHz channel bandwidth and a 15 KHz subcarrier spacing based on the FRC A14-1 in Annex A.14
(π/2 BPSK, R = 1/3, 1 RB) standard.
Table 2.7 Typical output power of the RRU5905 (900 MHz, UMTS single mode)
Number of UMTS Carriers Output Power per UMTS Carrier (W)
1 80
2 80
3 40
4 40
5 27
6 27
7 20
1 (MIMO) 2x60
2 (MIMO) 2x40
3 (MIMO) 2x27
4 (MIMO) 2x20
Table 2.8 Typical output power of the RRU5905 (900 MHz, LTE (FDD) single mode)
Number of LTE Output Power per LTE Bandwidth of an LTE (FDD)
(FDD) Carriers (FDD) Carrier (W) Carrier (MHz)
1 (MIMO) 2x80 10, 15, 20
1 (MIMO) 2x60 1.4, 3, 5, 10, 15, 20
2 (MIMO) 2x40 1.4, 3, 5, 10, 15, 20
3 (MIMO) 2x20 5, 10
Table 2.9 Typical output power of the RRU5905/RRU5905w (1800 MHz, single mode)
Numb Number Output Output Power Output Bandwidth of an
er of of LTE Power per GSM Power per LTE (FDD) Cell
GSM (FDD) per GSM Carrier with LTE (FDD) (MHz)
Carrie Carriers Carrier Dynamic Power Carrier
rs (W) Sharing (W) (W)
1 0 60 60 0 /
2 0 40 40 0 /
3 0 27 30 0 /
4 0 20 27 0 /
2 0 60 60 0 /
3 0 40 40 0 /
4 0 40 40 0 /
5 0 27 30 0 /
6 0 27 30 0 /
7 0 20 27 0 /
8 0 20 27 0 /
0 1 0 0 2x80 10, 15, 20
(MIMO)
0 1 0 0 2x60 5
(MIMO)
0 1 0 0 2x40 1.4, 3
(MIMO)
0 2 0 0 2x40 1.4, 3, 5, 10, 15, 20
(MIMO)
Table 2.10 Typical output power of the RRU5905 (900 MHz, GU non-MSR)
Number of Number of Output Power per Output Power per UMTS
GSM TRXs UMTS GSM TRX (W) Carrier (W)
Carriers
1 1 60 80
1 2 60 40
1 3 60 27
2 1 40 80
2 2 40 40
2 3 40 27
2 4 40 20
3 1 27 80
3 2 27 40
3 3 27 27
Table 2.11 Typical output power of the RRU5905 (900 MHz, GU MSR)
Number of Number of Output Power per Output Power per UMTS
GSM TRXs UMTS GSM TRX (W) Carrier (W)
Carriers
1 1 30 50
1 2 40 40
1 2 30 50
1 3 40 40
1 4 40 20
2 2 30 50
2 2 40 40
2 3 20 40
2 1 40 40
2 1 30 50
2 3 40 20
2 4 40 20
3 1 40 40
3 2 25 30
3 2 30 20
Table 2.13 Typical output power of the RRU5905/RRU5905w (1800 MHz, GL non-MSR)
Number of Number of Output Power Output Power Bandwidth of
GSM Carriers LTE (FDD) per GSM per LTE an LTE (FDD)
Carriers Carrier (W) (FDD) Carrier Cell (MHz)
(W)
1 1 60 80 5, 10, 15, 20
1 1 60 40 1.4, 3
1 1 30 50 1.4, 3, 5, 10, 15,
20
2 1 30 80 5, 10, 15, 20
2 1 30 40 1.4, 3
3 1 20 80 5, 10, 15, 20
Table 2.14 Typical output power of the RRU5905/RRU5905w (1800 MHz, GL MSR)
Number of Number of Output Power Output Power Bandwidth of
GSM Carriers LTE (FDD) per GSM per LTE an LTE (FDD)
Carriers Carrier (W) (FDD) Carrier Cell (MHz)
(W)
1 1 (MIMO) 40 2x40 1.4, 3, 5, 10, 15,
20
1 1 (MIMO) 30 2x50 1.4, 3, 5, 10, 15,
20
2 1 (MIMO) 30 2x50 1.4, 3, 5, 10, 15,
20
2 1 (MIMO) 40 2x40 1.4, 3, 5, 10, 15,
20
3 1 (MIMO) 20 2x40 1.4, 3, 5, 10, 15,
20
3 1 (MIMO) 25 2x30 1.4, 3, 5, 10, 15,
20
3 1 (MIMO) 30 2x20 1.4, 3, 5, 10, 15,
20
4 1 (MIMO) 25 2x30 1.4, 3, 5, 10, 15,
20
4 1 (MIMO) 20 2x40 1.4, 3, 5, 10, 15,
20
4 1 (MIMO) 30 2x20 1.4, 3, 5, 10, 15,
20
5 1 (MIMO) 20 2x20 1.4, 3, 5, 10, 15,
20
5 1 (MIMO) 16 2x30 1.4, 3, 5, 10, 15,
20
6 1 (MIMO) 16 2x30 1.4, 3, 5, 10, 15,
20
Table 2.15 Typical output power of the RRU5905 (900 MHz, UL MSR)
Number of Number of Output Output Power Bandwidth of an LTE
UMTS LTE (FDD) Power per per LTE (FDD) (FDD) FDD Carrier
Carriers FDD UMTS FDD Carrier (MHz)
Carriers Carrier (W)
(W)
1 1 (MIMO) 40 2x40 1.4, 3, 5, 10, 15, 20
1 (MIMO) 1 (MIMO) 2x40 2x40 1.4, 3, 5, 10, 15, 20
2 1 (MIMO) 40 2x40 1.4, 3, 5, 10, 15, 20
When RRU5905 (900 MHz) works in LM mode, NB-IoT can work in standalone, inband or
guardband mode.
The following steps show how to query NB-IoT power configurations:
Step 1: See NB-IoT Typical Power Configurations. If the power configuration is not in this table,
switch to Step 2.
Step 2: If NB-IoT works in standalone mode, see Table 2.18. If NB-IoT works in inband or
guardband mode, see Table 2.19, and for the detailed power configuration of LTE FDD and NB-IoT,
see NB-IoT (inband & guardband) Power Configuration Combination.
Table 2.19 Output power for the RRU5905 (LM, 900 MHz)
Working Total Number Total Number Total Output Bandwidth
Mode of LTE FDD of NB-IoT Power of LTE per LTE FDD
Carriers Carriers FDD + NB- Carrier (MHz)
IoT Carriers
(W)
When RRU5905 (1800 MHz) works in LM mode, NB-IoT can work in inband or guardband mode.
The following steps show how to query NB-IoT power configurations:
Step 1: See NB-IoT Typical Power Configurations. If the power configuration is not in this table,
switch to Step 2.
Step 2: See Table 2.20, and for the detailed power configuration of LTE FDD and NB-IoT, see NB-
IoT (inband & guardband) Power Configuration Combination.
Table 2.20 Output power for the RRU5905 (LM, 1800 MHz)
Working Total Number Total Number Total Output Bandwidth of
Mode of LTE FDD of NB-IoT Power of LTE LTE FDD
Carriers Carriers FDD + NB- Carrier (MHz)
IoT Carriers
(W)
NB-IoT Typical Power Configurations provides the typical power configuration for the
RRU5905w (LM, 1800 MHz).
When RRU5905 works in GUM mode, NB-IoT can work in standalone mode.
The following steps show how to query NB-IoT power configurations:
Step 1: See NB-IoT Typical Power Configuration. If the power configuration is not in this table,
switch to Step 2.
Step 2: See Table 2.21.
Table 2.21 Output power for the RRU5905 (GUM, 900 MHz)
Working Total Total Total Output Output Output
Mode Number Number Number Power Power Power
of GSM of UMTS of NB- per GSM per per NB-
Carriers Carriers IoT Carrier UMTS IoT
Carriers (W) Carrier Carrier
(W) (W)
GSM + 2 2 1 45 23 2x10
UMTS + 2 2 1 35 35 2x10
NB-IoT
2 2 1 21 46 2x10
4 2 1 27 14 2x10
4 2 1 25 20 2x10
4 2 1 18 34 2x10
6 1 1 20 10 2x10
6 1 1 14 28 2x10
2 2 1 50 25 2x5
2 2 1 35 30 2x5
2 2 1 30 35 2x5
2 2 1 25 50 2x5
4 2 1 30 15 2x5
4 2 1 27 20 2x5
4 2 1 25 25 2x5
4 2 1 21 28 2x5
4 2 1 18 36 2x5
6 1 1 21 11 2x5
6 1 1 15 33 2x5
When RRU5905 (900 MHz) works in GLM mode, NB-IoT can work in standalone, inband or
guardband mode.
The following steps show how to query NB-IoT power configurations:
Step 1: See NB-IoT Typical Power Configurations. If the power configuration is not in this table,
switch to Step 2.
Step 2: If NB-IoT works in standalone mode, see Table 2.22. If LTE (NB-IoT) works in inband or
guardband mode, see Table 2.23, and for the detailed power configuration of LTE FDD and NB-IoT,
see NB-IoT (inband & guardband) Power Configuration Combination.
Table 2.22 Output power for the RRU5905 (GLM, 900 MHz)
Workin Total Total Total Output Output Maxim Bandwi
g Mode Numbe Numbe Numbe Power Power um dth of
r of r of r of NB- per per LTE Output LTE
GSM LTE IoT GSM FDD Power FDD
Carriers FDD Carriers Carrier Carrier per NB- Carrier
Carriers (W) (W) IoT (MHz)
Carrier
(W)
Table 2.23 Output power for the RRU5905 (GLM, 900 MHz)
Working Total Total Total Output Total Bandwid
Mode Number Number Number Power Output th of LTE
of GSM of LTE of NB- per GSM Power of FDD
Carriers FDD IoT Carrier LTE FDD Carrier
Carriers Carriers (W) + NB-IoT (MHz)
Carriers
(W)
When RRU5905 (1800 MHz) works in GLM mode, NB-IoT can work in inband or guardband
mode.
The following steps show how to query NB-IoT power configurations:
Step 1: See NB-IoT Typical Power Configurations. If the power configuration is not in this table,
switch to Step 2.
Step 2: See Table 2.24, and for the detailed power configuration of LTE FDD and NB-IoT, see NB-
IoT (inband & guardband) Power Configuration Combination.
Table 2.24 Output power for the RRU5905 (GLM, 1800 MHz)
Working Total Total Total Output Total Bandwid
Mode Number Number Number Power Output th of LTE
of GSM of LTE of NB- per GSM Power of FDD
Carriers FDD IoT Carrier LTE FDD Carrier
Carriers Carriers (W) + NB-IoT (MHz)
Carriers
(W)
10, 15, 20
Guardband
: 10, 15,
20
6 1 (MIMO) 1 20 2x20 Inband: 5,
10, 15, 20
Guardband
: 10, 15,
20
When RRU5905 works in ULM mode, NB-IoT can work in standalone, inband or guardband mode.
The following steps show how to query NB-IoT power configurations:
Step 1: See NB-IoT Typical Power Configurations. If the power configuration is not in this table,
switch to Step 2.
Step 2: If NB-IoT works in standalone mode, see Table 2.25. If LTE (NB-IoT) works in inband or
guardband mode, see Table 2.26, and for the detailed power configuration of LTE FDD and NB-IoT,
see NB-IoT (inband & guardband) Power Configuration Combination.
Table 2.25 Output power for the RRU5905 (ULM, 900 MHz)
Workin Total Total Total Output Output Maxim Bandwi
g Mode Numbe Numbe Numbe Power Power um dth of
r of r of r of NB- per per LTE Output LTE
UMTS LTE IoT UMTS FDD Power FDD
Carriers FDD Carriers Carrier Carrier per NB- Carrier
Carriers (W) (W) IoT (MHz)
Carrier
(W)
Table 2.26 Output power for the RRU5905 (ULM, 900 MHz)
Working Total Total Total Output Total Bandwid
Mode Number Number Number Power Output th of LTE
of UMTS of LTE of NB- per Power of FDD
Carriers FDD IoT UMTS LTE FDD Carrier
Carriers Carriers Carrier + NB-IoT (MHz)
(W) Carriers
(W)
2 1 15, 20 15, 20
Table 2.28 Uplink frequency spectrum sharing of the RRU5905 (1800 MHz, GLN, 2R)
Number of Number of Number Bandwidth of LTE Bandwidth of NR
GSM LTE (FDD) of NR (FDD) Carrier Carrier (MHz)
Carriers Carriers Carriers (MHz)
4 2 1 15, 20 15, 20
6 1 1 15, 20 15, 20
The typical power consumption of an RRU is measured when the ambient temperature is
25°C and the RRU is 50% loaded. The actual power consumption has a 10% deviation from
this value.
Relative 5% RH to 100% RH
humidity
Absolute 1 g/m3 to 30 g/m3
humidity
Atmospheric 70 kPa to 106 kPa
pressure
Operating The following standards must be complied with:
environment 3GPP TS 45.005
3GPP TS 25.141
3GPP TS 36.141
3GPP TS 38.104
3GPP TS 37.141
ETSI EN 300019-1-4 V2.1.2 (2003-04) Class 4.1: "Non-weather
protected locations."
Shockproof NEBS GR63 zone4
protection
Ingress IP65
Protection (IP)
Rating