Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
7. CHANGES; ALTERATIONS: Seller may make such changes in the design 13. APPLICABLE LAWS: All orders, sales and these terms and conditions
and construction of products as shall, in its judgment, constitute an shall be governed by the laws of the State of Oregon, excluding conflict of law
rules. The provisions of the United Nations Convention on Contracts for the
improvement. Seller may furnish suitable substitutes for materials unobtainable
because of priorities or regulations established by governmental authority or International Sale of Goods shall not apply. All laws and regulations required to
because materials are unavailable from suppliers. be incorporated in agreements of this character are incorporated herein by this
reference. Seller certifies that these products were produced in compliance with
8. PATTERNS AND TOOLING: Seller shall have no responsibility for errors all applicable requirements of Section 6, 7 and 12 of the Fair Labor Standards
or variations in tooling, patterns, specifications, drawings, or designs furnished Act, as amended, and of regulations and orders of the U.S. Department of Labor
to it by Buyer. Buyer agrees to pay for changes in tooling or patterns made under Section 14 thereof. Any commodities, technology, or software exported
necessary by Buyer’s change in specifications, drawings or designs, and agrees pursuant to these terms and conditions will be exported from the United States
to assume all risks of damage thereto resulting from such changes when such in accordance with U.S. laws and regulations, including the Export
damage occurs without fault of Seller. Subject to Buyer’s approval, pattern and Administration Regulations or International Traffic in Arms Regulations, as
tooling changes, repairs or replacements which become necessary on account of applicable. Diversion, exportation or re-exportation contrary to U.S. law is
ordinary wear shall be made at Buyer’s expense. Seller shall not be liable for prohibited.
damages to tooling and pattern equipment except those due to Seller’s gross
negligence. Pattern and tooling storage facilities are provided by Seller for 14. FINAL AGREEMENT: These terms and conditions constitute the entire
agreement between Seller and Buyer with respect to the subject matter thereof,
active patterns and tooling only. Patterns and tooling not in use for a period of
12 months are subject to storage charges or return to Buyer at Buyer’s expense. and there are no understandings, agreements or representations, express or
Seller accepts no liability for the continued existence or availability of the implied, which are not contained herein.
pattern or tooling after such period of inactivity.
Sale v. 4/04
Table of Contents
Stainless Steel Swage Sleeves .................................4 Forestry Hardware ................................................ 16
One-piece Sleeves .................................................. 4 Hazel Hoe ........................................................... 16
Two-piece Seeves ................................................... 4 Pulp Trip Hook.................................................... 16
Single Sleeves ......................................................... 4 Poured Trailer Lifts ............................................... 16
End Loading Hooks............................................. 16
Carbon Steel Sleeves .............................................5
Industrial Rigging Hardware ................................ 17
Aluminium Duplex Sleeves ...................................6
Slip Through Thimbles ........................................ 17
Stainless Steel Cast Swage Sockets .........................7 Casing and Choker Thimbles ............................... 17
Open Sockets ........................................................ 7 Sling Choker Hooks with Plain-eye ...................... 17
Closed Sockets ....................................................... 7 Ball Bearing Swivels .............................................. 18
Bail Sockets ............................................................ 7 Roll Off Hook ..................................................... 18
Load Binder ........................................................ 18
Forged Swage Sockets ...........................................8
SS Open Socket Pins.............................................. 8 Socketing Media .................................................. 19
Forged Open Socket Pins ....................................... 8
ESCO® Swager Die Sets....................................... 20
Open Sockets ........................................................ 8
Swager Die Gauge Sets ........................................ 20
Closed Sockets ....................................................... 8
Mark 87 Swager Die Sets ..................................... 20
Spelter Sockets .....................................................9 Mark 100 Swager Die Sets ................................... 21
Galvanized Open Sockets....................................... 9 Mark 150 Swager Die Sets ................................... 22
Galvanized Closed Sockets ..................................... 9 Mark 250 Swager Die Sets ................................... 23
Cast Ferrules and End Fittings ............................ 10 Contact Information............................................. 24
Cast Screwy® Choker Ferrules .............................. 10
Cast Screwy Drumline Ferrules ............................ 10
Machined Choker Ferrules & End Fittings ........... 10
Wedge-type Ferrules ............................................ 11
Zinc Ferrules ....................................................... 11
Tractor Logging Hardware ................................ 12
Bardon® Choker Hooks ...................................... 12
Ring-type Holdrite® Winchline Hooks ................ 12
Sleeve-type Holdrite Hooks .................................. 12
Linender™ Hooks ................................................ 13
Twitch Hooks ...................................................... 13
Regualr Eye Arch Hooks with Plain Point ............. 13
Forged Arch Hook Shackles ................................. 13
Hi-Lead Logging Hardware .............................. 14
2 & 3-Drop Mainlines ......................................... 14
McGovern Butt Chains ....................................... 14
McGovern Butt Hooks ........................................ 14
Unicast™ Butt Swivels .......................................... 14
Unicast 3-way Swivels ........................................... 14
Weld Links .......................................................... 15
R-type Shackles with Pin ...................................... 15
Double-ender Hooks ........................................... 15
Screwy Guy Link Hook ....................................... 15
Strawline Hook.................................................... 15
AWRF Code E
Bail Sockets
Rope Weight Part List
Size Each Number Price
3/8" 1 4037377 $34.39
7/16" 1.8 5111792 $45.92
1/2" 1.8 5111790 $47.29
Machined Ferrules
Choker Ferrules
Rope Ferrule Weight Standard Part List
Size Size Each Package Number Price
3/8" MM 3 P 0.33 100 4006106 $ 2.50
7/16" MM 7/16 P 0.33 100 4006107 $ 2.50
1/2" MM 4 P 0.33 100 4006108 $ 0.75
9/16" MM 9/16 P1 0.33 100 4089829 $ 0.75
5/8" D5M 0.8 50 4008150 $ 3.20
3/4" B6M 1.1 50 4008152 $ 3.95
Swage in ESCO Ferrule Dies.
AWRF Code F
Ferrules Wedges
Rope Ferrule Part List Wedge Part List
Size Color Size Wt. Number Price Size Wt. Number Price
3/8", 7/16" Silver M3 0.25 4017601 $ 8.44
# 4-BR 0.1 4076278 $ 5.01
1/2", 9/16" Lt . Blue M4 0.25 4017602 $ 8.65
5/8", 9/16" Pink D5 0.5 4017603 $ 10.31
#5-AL 0.15 4006838 $ 4.82
5/8", 9/16" Maroon B5 0.75 4017604 $ 10.83
3/4" Grey B6 0.75 4017605 $ 11.98
#6-AL 0.2 4005821 $ 5.59
3/4" White L6 1.75 4005822 $ 15.36
7/8" Black L7 1.75 4005820 $ 16.32
#7-AL 0.2 4005819 $ 6.46
7/8" Red J7 2.75 4017606 $ 18.04
1" Green L8 1.5 4017616 $ 17.92
#8-BR 0.3 4076282 $ 8.68
1" Navy J8 2 4017607 $ 18.96
1 1/8" Yellow J9 2 4017608 $ 19.90 #9-BR 0.6 4060008 $ 9.59
1 1/4" Orange J 10 2.22 4017609 $ 21.04 #10-BR 0.7 4060009 $ 12.00
Zinc Ferrules
Rope Weight Part List Rope Weight Part List
Size Item Each Number Price Size Item Each Number Price
5/8" D-5 0.4 4152315 $ 22.75 7/8" J-7 1.8 4152317 33.92
3/8", 1/2" B-4 0.5 5100073 $ 11.78 1" J-8 1.8 1019007 $ 16.85
5/8" B-5 0.5 1018604 $ 11.78 1-1/8" J-9 1.8 1019058 $ 16.85
3/4" B-6 0.5 1018655 $ 11.78 1-1/4" J-10 1.8 4152318 $ 23.10
3/4" L-6 1.1 4152316 $ 31.57 1", 1-1/8" S-9 2 4152319 $ 36.18
7/8" L-7 1.1 1018850 $ 12.34 1-1/4' S-10 2 4152320 $ 36.18
1" L-8 1.1 1018906 $ 12.34 1-3/8" S-11 2 4152321 $ 36.18 IMPORTANT:
1-1/2" S-12 2 4152322 $ 36.18
Use only with
socket metal. DO
NOT USE
WITH RESIN.
Linender™ Hooks
Rope Weight Standard Part List
Size Each Package Number Price
Bantam Midget 4 — 5108948 $ 42.06
Light Bantam 6 — 5108945 $ 49.33
3-Drop Mainline
Weight Part List
Size Each Number Price
Bantam 134 4002455 $ 3,278.00
Light 198 4002454 $ 3,762.00
Junior 418 4002453 $ 4,180.00
HD Jr. or Standard 603 4002452 $ 5,150.00
Double-ender Hooks
Weight Part List
Size Each Number Price
Junior (7/8"–1-1/4") 17.5 5106043 $ 91.29
Standard (1"–1-1/2") 23 5106089 $ 109.64
Strawline Hook
Weight Part List
Size Each Number Price
3/8"-7/16" 0.5 4009423 $ 11.58
Link-eye Pin-eye
Link-eye Pin-eye
Roll-off Hook
Item Unit Weight Part Number List Price
Roll-off Hook 13.25 5121573 $55.00
Load Binder
Weight Standard Part List
Size Each Package Number Price
5/16-3/8" 6.8 5 4056114 $23.50
FERRULE DIES
Midget Front Entry 13 4016782 $750
Midget Side Entry 13 4069623 $790
FERRULE DIES
Midget Side Entry 27 4069624 $ 760.00
Midget Front Entry 27 4016528 $ 750.00
Dwarf Front Entry 30 4016530 $ 1,096.00
Dwarf Side Entry 30 4069625 $ 900.00
FERRULE DIES
Midget Front Entry 27 4016528 $ 750.00
Midget Side Entry 27 4069624 $ 760.00
Dwarf Front Entry 30 4016530 $ 1,096.00
Dwarf Side Entry 30 4069625 $ 900.00
Bantam Front Entry 36 4016532 $ 1,096.00
Bantam Side Entry 36 4069626 $ 960.00
Light Side Entry Only 42 4069627 $ 1,132.00
Junior Side Entry Only 38 4069628 $ 1,200.00
Correspondence Address:
ESCO Rigging Products Division
P.O. Box 10123
Portland, Oregon 97296-0123
Remittance Address:
ESCO Rigging Products Division
P.O. Box 75202
Chicago, IL 60675
1-800-227-3726 USA
© 2004 ESCO Corporation. All rights reserved. Printed in the U.S.A. ESCO, Bardon, Holdrite, and Screwy are registered trademarks and Conical, Linender, and Unicast are
trademarks of ESCO Corporation. ESCO is a licensed user of the trademark SOCKETFAST. All other brand or product names are trademarks or registered trademarks of their
respective owners.
ESCO ORDER POLICY AND TERMS OF SALE
SWAGE FITTINGS AND RIGGING HARDWARE
This policy effective 21June 2004 and applies to ESCO I/RIG-700-0604 Price List
DISCOUNT POLICY
• Discounts apply to List Prices in the ESCO I/RIG-700-0604 Price List
• Net Prices, when shown, are not discounted.
• No discount from List prices for Rigging Accounts doing less than $2500 annual invoiced sales.
• 30% Discount from List Prices for qualified Rigging Accounts < $20,000 annual invoiced sales
• 40% Discount from List Prices for qualified Rigging Accounts > $20,000 annual invoiced sales.
• 45% Discount from List Prices for qualified Rigging Accounts >$85,000 annual invoiced sales.
MERCHANDISE RETURNS
Returns must be current, unused merchandise and may only be returned with a prior written Returned
Material Authorization (RMA). Accounts will be credited upon receipt and inspection less a 15%
restocking charge and any applicable freight. Material returned without prior RMA will not be
accepted.