Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1.7 When bourdon tube pressure gauge is over reading then which adjustment is suitable
1) decrease lever length *2) increase lever length
3) decrease lever angle 4) increase lever angle
1.8 In rod type coupling element, input and output relation depends upon
1) lever length 2) lever angle
*3) trigonometrically rotation 4) lever length and angle
1.9 Outer end of coil hair spring is anchored in place of permanently fixing is to facilitate
*1) torque adjustment of spring and initial setting of the indicating element
2) ensure pointer is back to zero when deflecting torque is removed
3) 1) and 2) are correct
4) controlling torque
1.10 Thermostat is used in series with electrical measuring instruments to prevent error due to :
*1) temperature variation 2) pressure variation
3) density variation 4) humidity variation
1.11 Pressure operated instruments are sealed when it is used in pressurized a/c to prevent error due to
cabin
1) temperature control *2) pressurization
3) density control 4) humidity control
1.13 In a sine mechanism, the point of contact between two rods remains at :
1) constant distance from the centre of the rocking shaft
*2) constant radius from the centre of the rocking shaft
3) constant angle from the centre of the rocking shaft
4) none of the above