Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com/)
extension of a surface (/guidref/PWRS/2018/learn-explore/GUID-
B934D79C-83A3-4F04-8704-BA1078E597BF)
Create Account | Sign In English
AUTODESK KNOWLEDGE NETWORK (/)
Creating capping surfaces to cover rib channels (/guidref/PWRS/2018/learn-
explore/GUID-753DED21-BEBE-4793-9831-677309F1F130)
Search PowerShape
Creating a split surface
By: Help
Dec 12 2017
| In-Product View (http://help.autodesk.com/cloudhelp/2018/ENU/PWRS-ReferenceHelp/files/GUID-69126A93-2152-
4EB0-881A-09AD831D5EA8.htm) (http://help.autodesk.com/cloudhelp/2018/ENU/PWRS-ReferenceHelp/files/GUID-
69126A93-2152-4EB0-881A-09AD831D5EA8.htm)
Use the Split Segments dialog to break the split line into smaller segments and use them to define the
direction of the laterals in the split surface.
In the diagram below, you can see a segment of a split surface at a rounded corner:
(http://www.autodesk.com/)
Search PowerShape
Insert breakpoints — Select this option to insert and remove split segments from the split line.
To insert breakpoints, click positions on the split line. In the example below, two breakpoints have been
inserted at the corner :
To remove a breakpoint, hold down the Ctrl key and click the breakpoint.
When you have entered the breakpoint, deselect the Insert breakpoints check box.
The lateral at this point follows the direction of only one of the segments.
To find out the direction of the lateral at the breakpoint, set the split direction of the segments on either
side of the breakpoint and then select Preview.
In the example(http://www.autodesk.com/)
below, you can see one lateral at each single breakpoint:
Search PowerShape
When is showing, the breakpoint is selected as a split point that can go in two directions.
This breakpoint represents two points in the same location. A lateral is created from each point. One
lateral follows the split direction of the segment on one side and the other lateral follows the split
direction of the segment on the other side.
In the example below, you can see two laterals at each split breakpoint:
If you select the Along axis option on the Split surface dialog, breakpoints are added where the curve
changes direction. You can edit these breakpoints like the ones you insert manually.
Search PowerShape
Split direction — Choose a direction from the list. This list contains three directions:
Default — Uses the direction as specified on the Split Surface dialog. You can reverse the direction of
the laterals.
Radial — Uses the direction along the normal of the split line.
Along axis — Uses the direction along the axis specified on the dialog. Select an axis from the
options displayed.
When you select an option, the arrow changes to the specified direction.
To reverse the direction of the laterals to the opposite side of the composite curve, click the arrow.
Angle — Specifies the angle for the segment of the split surface. The default setting is the default angle
for the split surface as a whole.
Preview — Displays the direction of the laterals in the whole of the split surface:
(http://www.autodesk.com/)
Search PowerShape
To preview the new split surface, you need to click Preview on the Split Surface dialog.
The instrumentation arrow is placed at the midpoint if the span has only two points, or if the existing
midpoint is coincident with an endpoint.
Yes No