Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
GENERAL
“AE” range of surface wall mounted standard type fire hosereel
cabinets are generally fabricated from electro-galvanised steel
material. Aluminium or stainless steel materials are available upon
request.
The door hinges are either riveted or welded to the cabinet and
swings out 180 degree from left to right. The cabinet comes with
viewing panel design at the door to show the equipment installed
inside.
FEATURES
• Compact and elegant design.
• Quality finishes in epoxy/polyester powder coated and
oven baked.
• Easy and fast installation with minimum labour required.
Fig.310
Fig. 300 ✔ ✔ ✔
Fig. 310 ✔ ✔ ✔ ✔
Fig. 320 ✔* ✔ ✔
Fig.320
STANDARD FIRE HOSEREEL CABINET
“FRONT ELEVATION” “SECTION VIEW” “REAR VIEW”
16mm
800mm 340mm
125mm
800mm
HOSEREEL 25mm
OPERATING INSTRUCTION:
TURN ON THE INLET VALVE
BEFORE RUNNING OUT THE
HOSE
50mm 200mm
95mm
Fig 300
125mm
70mm x 70mm
FIRE Spare Key Box 12mm dia x 4 nos mounting holes
495mm
OPERATING INSTRUCTION:
TURN ON THE INLET VALVE
BEFORE RUNNING OUT THE
HOSE
50mm 200mm
95mm
Fig 310
123mm
Welded lift-up
Steel hinge
145mm
800mm 25mm
INSTRUCTIONS:
IN CASE OF FIRE, BREAK 12.5mm high
GLASS TO OPEN DOOR
“White” silk-screen
wordings
TURN ON THE INLET VALVE
BEFORE RUNNING OUT THE
HOSE
50mm 200mm
100mm
U-Rubber gasket
5mm clear “tempered” glass Door with single bending with
gap for fixing U-Rubber “Plan View”
Aluminium handle
“Key-alike” springlock 100mm
Fig 320