Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Contents
1. Product Description
2. Product Features
3. Struction Description
4. Step Description
4. Operate Steps
1 2 3 4
First, unscrew the two captive And then insert the hard disk Then, insert the housing and And finally put himself on the
screws on the box and remove the into the corresponding interface, tighten the two captive screws. box can be used normally.
inner box. the fixed hard drive screws
installed.
LAN Network
Make sure the PC / phone / tablet is connected to the WIFI after the box.
Computer version: open the "My Computer", enter the address bar to enter
the \\ 192.168.169.1 to save the file within the disk management.
NAS
Make sure that both the computer and the box are connected to the network of
the parent router and make sure that the phone is connected to the network of the
box.
1.Open the APP "KI routing" (download mobile phone APP please see this manual
"mobile APP function").
2.Into the interface can be seen after the IP box, the IP router assigned to the higher
IP box.
3. open the computer "My Computer" in the address bar, enter the mobile client to
see the IP, enter the file can be stored on the disk management
Step one. To enter website http://www.kimax.net.cn ,click the right corner to register personal account;
Login/ Sign
in
Step two: Input 192.168.169.1 in browser and Step three: Click advanced setting and input Step four: Can view account bind status in router
enter in, then fill in password kimax login and personal account & password in this page ( If condition after binding sccess.
enter to setting page; account bind status without display please press
Ctrl+F5 refresh) to finish binding.
Web version: Open browser and enter into website http://www.kimax.net.cn , login personal account and can to make remote manage to all binding device
including images, files and music, also can download files local.
2. Then mobile/ laptop to login personal account, while can use APP software “ KI
router” to make remote storage.
DHCP
DHCP is dynamic IP: If your network is for
obtaining IP address automatically ( for
example net cable is from WiFi router), while
系统设置 no need any setting and can connect network
if it’s not for dynamic type.
上网设置
PPPOE ( Dial-up )
Input network account and password will
access to network.
Wireless repeater
Click scan, device can search around WiFi
hotspot, and select the network you want
to repeat, input password to access.
3. Router Security Setting
System
Setting
安全设置
在此可修改管理员密码,默认密码为 kimax ,也是登录
密码
WIFI 设置
在此可修改 WIFI 名称、密码及加密方式。默认密码
为 12345678 或无密码
自动检测
2
3
3
2
4
4
6. Mobile APP
1. Download way
Android system can search "KI router" in Software Center
or scan QR code to download.
IOS system can search " KI router" to download in APP
Store.
安卓 IOS
Tool Box
WiFi Setting: It display WiFi present
property, can select WiFi
encryption way when need to set
WiFi, to input password click the
confirm it and set well.
Network setting: The user interface
will get into the networking type,
choose disconnected from the
network, by clicking on "Scan" to
get search other WIFI connection.
LAN Setting: Can modify LAN IP,
subnet mask and DNS.
Modify Password: Change
Administrator password, to input
previous password and then input
new password twice click Save well
done.
OTG: Can select this function when
the disk data need back-up.
Reset Router: Can restart router.
Restore factory setting: Can restore
the router back to factory status.
Remove Bind: To remove the
binding between personal account
and KI device.
Status
Can view the router version number,
network situation, IP address and router
disk usage details.
Files
Can display all the sharing files, local files, and
can make management and files transferring.
LAN mode can be managed file transfer and
sharing of documents and all local documents.
The case of remote login local documents
open, shared documents can not be opened
directly manage. Manage shared documents
must first copy files to a local disk, the
Equipment download can be managed.
Can view all the devices which connected the router. Also Attention: KI smart device must connect
can connect the network to one device and control network well and can login success.
sharing disk management.
7. FAQ
USB cable PC can’t read disk
New hard disk need to initialize the disk for first use, otherwise can’t read it, while only can view in the disk manager . Detailed
steps can search on internet “ disk initialize”.
Wireless can’t identify the disk.
If can’t read the hard disk via WiFi network please use USB cable connect your computer and to check disk attribute and whether
have initialized or not, disk attribute if is NTFS or FAT32. If disk format is no problem as usual there are to much disk fragmentation (
For example: it’s old hard disk took from previous PC, Several partition disk partition as long as there is a difference in quality will
affect the entire disk mount failed), will need to repartition the hard disk or to reformat.
Also wired and wireless USB memory storage can not be used simultaneously (USB cable links all disk data will give priority to
wireless USB data cable will not get data to disk)
Wireless relay (if the wireless relay unsuccessful certainly following situations which condition is not met, please check carefully)
First, the need to ensure a higher level of intelligent routing no speed limit, other restrictions client IP binding, MAC binding, etc.
Internet gets set permissions. Also superior routing WIFI password needs eight more. Superior routing SSID can not contain spaces,
SSID can not have Chinese characters and contains special symbols. If the above is no problem, please check the superior routing
WIFI password is correct. If no problem, configure the relay is complete, restart the KI power equipment, see if you can boot
automatically connect successfully.
TP-LINK router individual needs to the higher bandwidth routing wireless settings and channel set to a fixed, default router will
cause the automatic individual wireless relay failure.
360 free WIFI, business class advertising WIFI, mobile phones and other hot spots supported by unknown.
Wireless and wired Internet connection can not relay mode simultaneously. After the success of the wireless relay If using wired
devices connect to the Internet to KI, KI need first route of the device management page - radio relay settings page - Click relay
network list behind the "off" button. After disconnecting the wireless relay settings, power off restart can be linked to KI devices
connected to the Internet network cable KI WAN port.