Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
HOLDING
AND CUTTING 10
PLIERS
LOCKING PLIERS
RETAINING PLIERS
SPECIALTY PLIERS
C-CLAMPS
KNIVES
34070 Sec10 HoldCutV1 6/21/03 11:24 AM Page 282
HOLDING
AND CUTTING 10
PLIERS C-CLAMPS
Proto offers a broad range of professional pliers: Tongue & Groove, C-Clamps are holding tools that free the users hands or provide
Slip Joint, Cutting, Holding, Locking, Retaining Ring, Electronic and pressure while cutting, drilling, or fastening multiple pieces. Proto C-
other specialty styles. All pliers are manufactured from high quality Clamps are engineered for the toughest clamping jobs and are
alloy steel and heat treated for maximum strength and durability. designed to hold securely up to there rated capacities.
COMBINATION PLIERS
• Has two jaw positions and shear type wire cutter.
• Plastisol grips for added comfort.
Product Weight
ID No. L A B C lbs.
275G 5-13/16" 1-5/16" 7/8" 9/32" .24 Plastisol Dipped Handles
REFERENCE MEASUREMENT KEY
276 6-1/2" 1-3/4" 1-3/16" 3/8" .52
276G 6-9/16" 1-3/4" 1-3/16" 3/8" .52 Plastisol Dipped Handles
MADE IN
Visit us at...
284
www.stanleyproto.com USA
34070 Sec10 HoldCutV1 6/21/03 11:38 AM Page 285
LINEMAN'S PLIERS
• For utility linemen, wiring and electrical equipment installation, LINEMAN'S PLIERS—PIPE JAW
and maintenance. • Serrated flat nose jaws with toothed pipe grip.
• Induction hardened cutting edges and diamond serrated jaws. • Plastisol grips for added comfort.
• Built-in insulation crusher Product Weight
• Plastisol grips for added comfort. ID No. L A B C lbs.
IRONWORKERS PLIERS
• Designed to tie and cut wire associated with reinforcing bar.
• Hook bend in handle to reduce slippage when gripping and pulling.
LINEMAN'S PLIERS—NEW ENGLAND STYLE • Coil spring holds jaws open, yet close easily.
• Slim rounded nose for easy access in restricted spaces. • Plastisol grips for added comfort.
• Diamond serrated jaws. Product Weight
• Plastisol grips for added comfort. ID No. L A B C lbs.
Product Weight 269WSG 9-1/4" 1-9/16" 1-9/32" 5/8" 1.16
ID No. L A B C lbs.
266G 6-3/16" 1-3/32" 29/32" 1/2" .50
267G 7-1/4" 1-9/32" 1-1/8" 1/2" .67
MADE IN
Visit us at...
286
www.stanleyproto.com USA
34070 Sec10 HoldCutV1 6/21/03 11:40 AM Page 287
NEEDLE NOSE PLIERS—LONG REACH NEEDLE NOSE PLIERS WITH SIDE CUTTER
• Extra long handle allows greater access to confined, restricted areas. • Induction hardened cutting edges.
• Improved fulcrum point provides more holding power at the tip • Diamond serrated jaws.
with less gripping effort. • Plastisol grips for added comfort.
• Plastisol grips for added comfort. Product Weight
Product Weight ID No. L A B C lbs.
ID No. L A B C lbs.
229-01G 5-9⁄16" 1-11⁄16" 1⁄2" 9⁄32" .23 Coil Spring
240G 11-9/16" 2-13/16" 23/32" 13/32" .63 226G 6-5⁄8" 1-7⁄8" 11⁄16" 3⁄8" .34 Meets ergonomics criteria
226-01G 7-1⁄2" 2-5⁄8" 3⁄4" 3⁄8" .40 Coil Spring
Fed'l Specs.: GGG-P-471E
ANSI Spec.: B107.13M
NEEDLE NOSE PLIERS—BENT NOSE SET OF 291R 3 PC. LOCKING PLIERS SET
• Nose bent to 78° angle to reach around obstructions. • Weight: 2.51 lbs.
• Very thin nose allows access into minimum clearance areas. Set No. Contents Description Length
• Diamond serrated jaws. 291R 2901R Straight Jaw 7"
• Plastisol grips for added comfort. 292R Curved Jaw 10"
Product Weight 286LN Long Nose 6"
ID No. L A B C lbs. 2484 Tool Pouch —
225G 6-5/16" 1-5/8" 3/4" 3/8" .42
MADE IN
Visit us at...
288
www.stanleyproto.com USA
34070 Sec10 HoldCutV1 6/26/03 4:41 AM Page 289
LOCKING PLIERS—C-CLAMP
LOCKING PLIERS—WELDING CLAMP • Wide opening jaws provide greater versatility in clamping a wide
• U-shaped jaws for visibility and working space. variety of shapes.
• Hold work in proper alignment. • Heat treated alloy steel for maximum toughness and durability.
• Heat treated alloy steel for maximum toughness and durability. • Adjusting screw provides precise pressure.
• Adjusting screw provides precise pressure. • Guarded release trigger provides safety (against accidental opening)
• Guarded release trigger provides safety (against accidental opening) as well as quick release.
as well as quick release. Product Throat Jaw Weight
Product Jaw Throat Weight ID No. Length Depth Adjustment lbs.
ID No. Length Width Depth lbs.
265R 6" 1/2" 0 - 2-1/8 .47
261R 9" 2-3/4" 1-5/8" 1.56 266R 11" 2-5/8" 0 - 4" 1.75
Fed'l Specs.: GGG-W-00649 Fed'l Specs.: GGG-W-00649
MADE IN
Visit us at...
290
www.stanleyproto.com USA
34070 Sec10 HoldCutV1 6/21/03 11:44 AM Page 291
15⁄16 – 1-7⁄16 1400 3100 5100 –93 thru–143 1-1⁄16 – 1-3⁄4 N1300 3000-X N5000 –106 thru–175
385 0˚ .070 7-1⁄2" 15⁄16 – 1-7⁄16 1401 3101 5101 –93 thru–143 1-1⁄16 – 1-3⁄4 N1301 3001-X N5001 –106 thru–175
375 45˚ .070 7-3⁄8" 1 – 1-7⁄16 1402 — 5102 –100 thru–143 1-1⁄16 – 1-3⁄4 N1302 — N5002 –106 thru–175
376 90˚ .070 7-1⁄8" 1 – 1⁄16, 2 1408 4100 5108 –106 thru–200 1-7⁄16 – 2 1308 4000 5008 –143 thru–200
7⁄16 – 3⁄4 1440 — 5555 –43 thru–75 1-7⁄16 – 2 1308 4000 5008 –143 thru–200
1-1⁄2 – 3-1⁄2 1401 3100 5100 –150 thru–350 1-13⁄16 – 3 N1300 3000-X N5000 –181 thru–300
377 0˚ .090 9-1⁄4"
1-1⁄2 – 3-1⁄2 1402 — 5102 –150 thru–350 1-13⁄16 – 3 N1301 3001-X N5001 –181 thru–300
378 45˚ .090 9"
1-1⁄2 – 1-3⁄4 — 3101 5101 –150 thru–175 1-13⁄16 – 3 N1302 — N5002 –181 thru–300
379 90˚ .090 8-5⁄8"
2-5⁄32 – 3-11⁄32 1408 4101 5108 –215 thru–334 2-1⁄16 – 3 1308 4000 5008 –206 thru–300
Fed'l Specs.: GGG-P-480E
PLIERS SELECTION PROCEDURE
ANSI B107.19
Anderton, Industrial, and Truarc are retaining ring manufacturers. Their ring part numbers are listed to help you select the proper pliers.
The Dash No. is the size of the ring for the shaft or bore. For example, if you needed to select pliers for a Truarc 5100-68 ring,
you would choose either a 372, 373, or 374 after selecting the tip angle that best meets your application.
REPLACEMENT TIPS 364-TO, 0˚ Tips. 364-T45, 45˚ Tips. 364-T90, 90˚ Tips.
Fed'l Specs.: GGG-P-480E
Internal
ANSI Spec.: B107.19
NOTE: When selecting retaining ring pliers always choose the largest diameter tip that will fit the 45° 90°
retaining ring being removed or installed.
Use with either External or Internal Retaining Rings.
MADE IN
Visit us at...
294
www.stanleyproto.com USA
34070 Sec10 HoldCutV1 6/21/03 11:04 AM Page 295
BRAKE PLIERS—ALL-PURPOSE
• Easily installs and removes brake shoe retaining spring on drum brakes. BATTERY TERMINAL SPREADER AND REAMER
• Socket end removes spring from anchor stud. • Plastisol grips for added comfort.
• Notched end installs spring on anchor. Product Weight
ID No. Length lbs.
Product Weight
ID No. Length lbs. 319 7-1/2" .55
217 12-7/8" 1.05
C
Cutting Jaw Jaw Jaw
Edge Width Thickness Length
Visit us at...
296
www.stanleyproto.com
34070 Sec10 HoldCutV1 6/21/03 11:04 AM Page 297
MADE IN
Toll Free Customer Service Number: 1-800-800-TOOL
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES. USA Customer Service FAX Number: 1-770-385-3708
297
34070 Sec10 HoldCutV1 6/21/03 11:04 AM Page 298
MADE IN
Visit us at...
298
www.stanleyproto.com USA
34070 Sec10 HoldCutV1 6/21/03 11:04 AM Page 299
Visit us at...
300
www.stanleyproto.com
34070 Sec10 HoldCutV1 6/21/03 11:04 AM Page 301
TACTICAL FOLDER
• Designed by Fred Carter.
• Built using the highest quality precision
TANTO FOLDER engineered and CNC machined parts.
• Constructed using all precision laser cut parts • The handle is made of 6061-T6 aircraft aluminum
with CNC machining and grinding set to the closest with a 40 Rockwell hardness anodized coated finish.
tolerances available in the knife industry today. • Recessed liner spring for a slim profile.
•1/2" serrated, stainless steal blade. • Bead blasted stainless steel pocket clip.
• Liner locking blade. • CryoEdge® treated, 440 Stainless Steel Blade.
• Lightweight 6061 aircraft aluminum handle with an • Blade features ball bearing detente for secure blade closure.
anodized military gray finish. • Ambidextrous thumbstud.
• Stainless steel bead blasted pocket clip. Product Closed Position Blade Blade
ID No. Overall Length Length Thickness
MADE IN
Toll Free Customer Service Number: 1-800-800-TOOL
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES. USA Customer Service FAX Number: 1-770-385-3708
301