Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MINI-LATHE ML-360
[Working Examples]
SUPERBLY RIGID BED WITH PRECISION GROUND VEE WAYS ML-360(No.35) Specifications
The well located cross bracing and heat treated bed ensures excellent long
term rigidity. Center height
75mm
Distance between centers
360mm
MAIN SPINDLE FOR PRECISE MACHINING Swing over carriage
96mm
Swing over bed
The hardened and accurately finished main spindle is supported with precision 150mm
Main spindle hole
taper roller bearings. 16mm
Thus steady and long lasting accuracy secured. 260 520 845 970 Boring Turning between centers Drilling
Main spindle speed 845 2860rpm(60Hz) Irregular shaped aluminum casting is clamped Cylindrical turning between centers. Workpiece Centering and drilling on hexagonal bar performed
230 450 740 850 on T-slot face with Fixture is held with Face plate, Lathe dog, Live center with Drill chuck fitted in tail spindle.
CARRIAGE OF GENEROUS TRAVEL 1630 2520rpm(50Hz) and Travelling rest.
Main spindle taper
The 85mm cross feed ensures adequate range for both lathe work and milling. MT#2
Tail spindle travel
45mm
Tail spindle diameter
POWERFUL 300 WATT MOTOR FOR FORWARD REVERSE ROTATION 24mm
Tail spindle taper
MT#2
The change of direction is easily achieved on this powerful condenser motor Carriage cross travel
85mm
proving convenient for automatic feed and thread cutting. Carriage longitudinal travel Whole range between
centers
VERSATILE TAIL STOCK Condenser type Single phase
Dead or Live center fitted in the tail spindle facilitates turning on long workpiece. 100, 115, 220, 240V
Motor
Input 470, Output 300W
Drilling, reaming and so on are also practicable with Drill chuck. 2600rpm(50Hz)
3180rpm(60Hz)
Dimensions
CONVENIENT 0(ZERO) - SETTING Weight
756 x 377 x 245mm
Feed handles are of coaxial ring construction which permits 0-setting operation. 30kg(whout accessories)
Cut depth can be preset and checked easily. Step boring Taper turning Threading
Workpiece of large diameter is clamped in 3-jaw Turning on the end of long workpiece 3-jaw universal chuck and Live center hold long
universal chuck with jaws reversed. supported with Fixed rest. workpiece in external threading.
MANIX Mini Machine Tools Series 08 09
MINI MACHINE TOOLS SERIES
ML-360 Series
Accessories
Accessories for ML-360 & MA-360
No.3531 No.3532 No.3533 No.3534
Fine Feed Attachment Milling Collet Drill Chuck( 10mm) Milling Table
Fitted to Milling attachment For Milling attachment MA-360. Fitted to Milling attachment MA-360 to Mounted on carriage where
No.3530 MA-360. Fine feed practicable by Size : 6, 8, 10, 12mm clamp drill up to 10mm workpiece is fixed on 3 T-slots with
Milling Attachment MA-360 Main Body turning handwheel. Fixture No.3443.
Minimum increment 0.025mm
No.3505
Dead Center
For both main and tail spindle
End taper : 60 Shank MT #2
No.3450-1 No.3451-1
Bit Holder(SCLCR0808-D06) Bit Holder(SDNCN0808-D07)
For right hand finishing tool For sharp pointed tool