Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
General Description
The transmitter described shall be a TeleEye model number RX3616 or equivalent. It
shall have 16 camera inputs, 2 audio inputs, 1 audio output, 1 audio PA and 16 alarm
inputs, 1 composite video output and 4 relay switches. The security management shall
comply with British standard BS8418:2003, include tamper detection, power or
system failure, motion detection, video loss, external alarm and arm/disarm zone. The
video compression and coding method shall be SMAC-M. The recording and
transmission performance shall not be affect by different connection types
(Recording, LAN, ADSL and Dial-up) speed. The transmission rate shall be up to
100fps (frame per second) on LAN. The recording rate shall up to 200fps.
3. Connectivity
3.1 The transmission rate on LAN shall up to 100fps.
3.2 The transmitter shall have 3 types of throughput control. It support network
bandwidth limitation (range 9.6kbps ~ 100Mbps), which can be pre-
configure on the unit itself.
3.3 The transmitter shall support sureLINK service (Internet connection
assigned with dynamic IP address).
3.4 The transmitter shall perform in low and medium bandwidth communication
network including ADSL, ISDN and PSTN.
3.5 The transmitter shall have a standard 10/100Base-T Ethernet connection.
The Ethernet connection shall allow live and recorded viewing on a
networked PC using the included software, or live viewing via web page
over internet explorer.
3.5.1 The software shall include the capabilities of:
3.5.1.1 Live full and quad screens of all cameras.
3.5.1.2 Fast forward and rewind recorded image.
3.5.1.3 Search and copy specific time and date data.
3.5.1.4 Manual copying of single images as BMP to PC.
3.5.1.5 Supports exterior Pan/Tilt/Zoom (PTZ) and telemetry
presets.
3.5.2 The Web page features shall include:
3.5.2.1 Viewing of live images in full and quad mode, including
telemetry control.
3.5.2.2 Playback with search date and time function.
3.5.2.3 Password authentication.
3.6 Multiple user access (up to six users), with no affect performance of live
viewing, playback and record capability.
3.7 The transmitter shall support remote system adjustments.
4. Miscellaneous
4.1 Connection
4.1.1 The transmitter shall have 2 audio inputs, 1 audio out and 1 PA
output.
4.1.2 The transmitter shall have an Ethernet RJ-45, 10/100 bast-T
connection.
4.1.3 The transmitter shall have a RS-232C modem port interface.
4.1.4 The transmitter shall have a RS-422/485 telemetry control interface.
4.1.5 The transmitter shall have a 1Vp-p BNC video output.
4.2 The transmitter shall comply with TeleEye DM4 or DM2 telemetry protocol.
4.3 Video Extraction
4.3.1 The transmitter shall support file export of digitally images over the
network and internal CD-R.
4.3.2 The extracted image shall be view on any PC without any pre-
installed player.
4.4 The transmitter shall provide a standalone user-friendly, paged menu system
that is controlled from the face of the transmitter and viewable on a
composite monitor that can be connected to the transmitter main monitor
output.
4.5 Electrical
4.5.1 The transmitter shall have four relay switches with maximum rating
24VAC and 1A.
4.5.2 The transmitter shall operate in voltage 12VDC and maximum rating
50W.
4.5.3 A power supply unit shall be included to provide an input voltage of
220 VAC 50Hz and an output voltage of 12VDC.
4.6 Operating environment
4.6.1 The transmitter shall operate under temperature range from 5C ~
45C.
4.6.2 The transmitter shall operate under relative humidity less than 85%,
no condensation.
4.7 Mechanical design
4.7.1 The transmitter shall measure 403mm x 370mm x 125 mm.
4.7.2 The transmitter unit weight shall be 3.5kg.
4.8 The transmitter shall fully comply with the British standard
BS 8418:2003
4.9 The transmitter shall be CE certified.
4.10The transmitter shall keep log for different events for 6
months.
4.11 Additional Functionality
4.11.1 The transmitter shall maintain all user-defined programming in the
event of power loss or power down.
4.11.2 Cameras
4.11.2.1 The transmitter shall provide BNC input.
4.11.2.2 The transmitter shall manual-detect connected cameras.
4.11.2.3 The transmitter shall provide on-screen indication (color in
blue) on the main monitor if power or video capability is
lost from any or all cameras.
4.11.2.4 The transmitter shall provide a user-programmable, camera
without affecting other camera recording.
4.11.2.5 The transmitter shall have software-controlled contrast and
color adjustment for each camera.