Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(a) Its wet bulb temperature increases and dew point remains constant
(b) Its wet bulb temperature decreases and the dew point remain constant
(c) Its wet bulb temperature increases and the dew point decreases
(d) Its wet bulb temperature decreases and dew point increases.
(a) ammonia solution (b) sodium silicate (c) glycol (d) brine.
3. In air-conditioning design for summer months, the condition inside a factory where heavy work is performed as compared to a factory in which
light work is performed should have
A psychrometer measures
Of these statements :
(a) 1 alone is correct (b) 2 and 3 are correct (c) 1 and 3 are correct (d) 1, 2 and 3 are correct.
5. Two blocks which are at different states are brought into contact with each other and allowed to reach a final state of thermal equilibrium. The
final temperature attained isBspecified by the
(a) Zeroth law of thermodynamics (b) First law of thermodynamics (c) Second law of thermodynamics
(a) when molecular momentum of the system becomes zero (b) at sea level
(c) at the temperature of – 273 K (d) under vacuum conditions (e) at the centre of the earth.
(a) loss of heat (b) no loss of heat (c) gain of heat (d) no gain of heat.
(a) zero (b) minimum (c) maximum (d) positive (e) negative.
(a) 0.8314 J/mole/K (b) 8.314 J/mole/K (c) 83.14 J/mole/K (d) 831.4 J/mole/K (e) 8314 J/mole/K.
Answers.
(1)a.(2)d.(3)a.(4)a.(5)a.(6)b.(7)a.(8)a.(9)a. (10)e.
3. How is the smooth and continuous discharge of fluid achieved in a gear pump?
a. increasing number of teeth
b. decreasing number of teeth
c. none of the above.
9. Which type of compressor requires a reservoir for compressed air and why?
a. rotary compressor to avoid pulsating effect
b. reciprocating compressor to avoid pulsating effect
c. both rotary and reciprocating compressors to avoid pulsating effect
d. none of the above.
10. Which type of pump is used for lifting water from the ground surface to the top of the building?
a. centrifugal pump
b. turbine pump
c. submersible pump
d. all the above.
ANSWERS:
1)a, 2)a,3)a,4)c,5)b,6)c,7)b,8)c,9)b,10)d,