Sei sulla pagina 1di 39

SECURE SoR

Date : 09.07.2019
Item No Specification Unit Rate
Jungle clearance including uprooting of rank vegetation, grass, brush wood,
63.01.02 saplings and tree not exceeding 30cm girth and removing not exceeding sqm 6.06
50meters outside the periphery of the area cleared.
63.01.03 Deduct from items 0102 for uprooting not done., sqm 3.64
Cutting down trees (exceeding 30cm girth, grubbing uproot, filling pits and
63.01.04 levelling off ground, lopping branches, trimming, removing not exceeding
50meter & staking serviceable material and cleaning site.
63.01.04.1 (a) Girth exceeding 30 cm and not exceeding 100 cm each 1109.2
63.01.04.2 (b) Girth exceeding 100 cm and not exceeding 150 cm each 1920.91
63.01.04.3 (c) Girth exceeding 150 cm and not exceeding 200 cm each 2218.62
63.01.04.4 (d) Girth exceeding 200 cm and not exceeding 250 cm, each 2590.04
63.01.04.5 (e) Girth exceeding 250 cm and not exceeding 300 cm, each 2955.92
63.01.05 Deduction from items 0104 (1) to 0104 (5) for uprooting not done.
Deduction from items 0104.1 Girth exceeding 30 cm and not exceeding 100 cm
63.01.05.1 each 485.63
for uprooting not done.,
Deduction from items 0104.2 Girth exceeding 100 cm and not exceeding 150 cm
63.01.05.2 each 841.03
for uprooting not done.,
Deduction from items 0104.3 Girth exceeding 150 cm and not exceeding 200 cm
63.01.05.3 each 971.38
for uprooting not done.,
Deduction from items 0104.4 Girth exceeding 200 cm and not exceeding 250 cm
63.01.05.4 each 1133.99
for uprooting not done.,
Deduction from items 0104.5 Girth exceeding 250 cm and not exceeding 300 cm
63.01.05.5 each 1294.18
for uprooting not done.,
Uprooting of roots of trees including removing and stacking (Girth to be
63.01.06
measured at 1.00 m above G.L.),
63.01.06.1 (1) Girth exceeding 30 cm and not exceeding 100 cm, each 485.63
63.01.06.2 (2) Girth exceeding 100 cm and not exceeding 150 cm, each 841.03
63.01.06.3 (3) Girth exceeding 150 cm and not exceeding 200 cm, each 971.38
63.01.06.4 (4) Girth exceeding 200 cm and not exceeding 250 cm, each 1133.99
63.01.06.5 (5) Girth exceeding 250 cm and not exceeding 300 cm, each 1294.18
Ordinary shrub jungle (areas below 25% covered by shrubs) clearance involving
63.01.07 removal of grass. Shrubs, bushes and twigs, excluding uprooting (for survey sqm 0.89
works),
Medium shrub jungle (25% to 50% area covered by shrubs) clearance involving
63.01.08 removal of grass. Shrubs, bushes and twigs, excluding uprooting out (for survey sqm 1.79
works),
Thick shrub jungle (area above 50% covered by shrubs) clearance involving
63.01.09 removal of grass. Shrubs, bushes and twigs, excluding uprooting out (for survey sqm 2.69
works),
63.02.08 Cement Mortar 1:2 ( 1 cement, 2 sand ), cum 5701.29
63.02.09 Cement Mortar 1:3 ( 1 cement, 3 sand ), cum 4778.87
63.02.10 Cement mortar 1:4 ( 1 cement, 4 sand ), cum 3960.71
63.02.11 Cement Mortar 1:5 ( 1 cement, 5 sand ), cum 3520.15
63.02.12 Cement Mortar 1:6 ( 1 cement, 6 sand ), cum 3142.54
63.02.13 Cement Mortar 1:8 ( 1 cement, 8 sand ), cum 2639.06
63.02.14 Labour only for Cement Mortar, cum 254.04
12698.22
63.02.23 White cement mortar 1:2 ( 1 White cement, 2 Marbel dust), cum

Page 1 of 39
Item No Specification Unit Rate
Excavation in trenches for foundations and for pipes, cables, etc. not exceeding
1.5m in width and for shafts, cesspits and the like not exceeding 10 sqm on plan
63.03.08 including dressing of sides and ramming of bottoms, lift upto 1.5m including
getting out and stacking the excavated soil and disposal of surplus excavated
soil as directed within a lead of 20m,
63.03.08.1 Disintegrated or soft rock (not requiring blasting), cum 289.77
63.03.08.2 Hard rock requiring blasting, cum 497.86
Hard rock requiring chiselling (i.e. hard rock requiring blasting but where
63.03.08.3 cum 685.28
blasting is prohibited),
Boring holes 3.5m deep in ordinary soil (for cast in situ piles) and getting out the
63.03.11 soil (under ramming if any shall be paid for separately) and disposal of the
surplus excavated soil as directed within a lead of 20m for-Diameter of piles.,
63.03.11.1 200 mm, no 439.32
63.03.11.2 250 mm, no 525.04
63.03.11.3 300 mm, no 614.54
63.03.12 Extra for under-ramming inside the bore holes for under reamed piles.,
63.03.12.1 200 mm, no 167.66
63.03.12.2 250 mm, no 210.21
250.59
63.03.12.3 300 mm, no
Add to or deduct from the rate for bore holes of 3.5metre depths, if the bore-
63.03.13
holes are made deeper or shallower than 3.5metres., ,
139.22
63.03.13.1 200 mm, metre
187.94
63.03.13.2 250 mm, metre
63.03.13.3 300 mm, metre 208.82
Surface dressing of ground, including removing vegetation, and/ or unequalities
63.03.16 not exceeding 15cm deep and disposal of rubbish lead upto 20m And lift
upto1.5m,
63.03.16.1 Loose or soft soil, sqm 6.05
63.03.16.2 Dense or hard soil, sqm 8.5
63.03.17 Dag-beling,
63.03.17.1 Single spade stroke minimum 75mm deep, metre 0.35
Extra for every additional Lead beyond 50 metres or part thereof upto 200m for
63.03.18
every 50 m lead
63.03.18.1 (I) Lead upto 100 Metres cum 33.55
63.03.18.2 (II) Lead upto 150 meters cum 67.12
63.03.18.3 (III) Lead upto 200 meters cum 100.63
Pumping out water caused by springs tidal or river seepage, broken water mains
63.03.19 Kilo litre 59.59
or drains or well point pumping and the like.,
63.03.21 Dry silt clearance in drainage and culvert etc., cum 53.26
For Earthen Dam : Extra for every additional lift for filling of soil (hearting/casing
63.03.22
etc.) of 1.5 m or part thereof (Rate applicable for work done by unskilled labour),
63.03.22.1 (a) Loose/soft soil and dense/hard soil for lift of, cum 9.04
63.03.22.1 (a) Loose/soft soil and dense/hard soil for lift of,

Page 2 of 39
Item No Specification Unit Rate
63.03.22.1.1 (I) 1.50 m. to 3.00 m., cum 9.04
63.03.22.1.2 (II) 3.00 m to 4.50 m, cum 15.84
63.03.22.1.3 (III) 4.50 m to 6.00 m, cum 23.76
63.03.22.1.4 (IV) 6.00 m to 7.50 m, cum 31.68
63.03.22.1.5 (V) 7.50 m to 9.00 m, cum 39.6
63.03.22.1.6 (VI) 9.00 m to 10.50 m, cum 47.52
63.03.22.1.7 (VII) 10.50 m to 12.00 m, cum 55.44
63.03.22.1.8 (VIII) 12.00 m to 13.50 m, cum 63.36
63.03.22.1.9 (IX) 13.50 m to 15.00 m, cum 71.28
For Earthen Dam : Extra for every additional lift for filling of soil (hearting/casing
63.03.22
etc.) of 1.5 m or part thereof (Rate applicable for work done by unskilled labour),
63.03.22.2 (b) Disintegrated/ soft or hard rock, cum 15.82
Construction of embankment/sub grade by fly ash including clearing & grabbing
existing surface, (as per clause 305 and its sub clauses where required and as
per IRC SP-58-2001) i/c all lifts, cost of spreading, watering, compaction and
63.03.23 cum 53.26
maintenance of surface during construction to ensure shedding and preventing
ponding of water, providing camber, shaping and dressing, finishing etc.
complete. (lead for fly ash will be paid extra excluding loading),
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
63.04.01 foundation etc. in layers not exceeding 20cm in depth consolidating each cum 53.36
deposited layers by ramming and watering lead upto 50m and lift upto 1.5m,

Filling foundation, around masonry work, plinth, sides of foundation etc. with
63.04.02 moorum I/c ramming layers not exceeding 20cm in depth consolidating each cum 269.2
deposited layers by ramming and watering lead upto 50m and lift upto 1.5m.,
Filling in plinth with sand under floors including watering, ramming,
63.04.04 cum 1220.29
consolidating and dressing complete.,
Providing and laying in foundation, plinth and under floors cement concrete
63.04.13 with 40mm nominal size graded stone aggregates (metal) i/c ramming in layers
and curing complete excluding cost of form work,
63.04.13.1 (a) C.C. 1:2:4 (1cement, 2sand, 4metal), cum 3778.52
63.04.13.2 (b) C.C. 1:3:6 (1cement, 3sand, 6metal), cum 3125.2
63.04.13.3 (c) C.C. 1:4:8 (1cement, 4sand, 8metal), cum 2784.7
63.04.13.4 (d) C.C. 1:5:10 (1 cement, 5sand, 10metal), cum 2532.97
63.04.13.5 (e) C.C. 1:6:12 (1 cement, 6sand, 12metal), cum 2407.09
63.04.13.6 (f) C.C 1:2.5:5 ( 1cement, 2.5 sand, 5metal), cum 3463.84
Providing and laying in foundation, plinth and under floors cement concrete
with 20mm nominal size graded stone aggregates (metal) i/c ramming in layers
63.04.16.1 and curing complete excluding cost of form work ( if 20 mm metal is used in cum 3870.25
place of 40mm metal in item number 04.13 & 04.15) (a) C.C. 1:2:4 (1cement,
2sand, 4metal),
Providing and laying in foundation, plinth and under floors cement concrete
with 20mm nominal size graded stone aggregates (metal) i/c ramming in layers
63.04.16
and curing complete excluding cost of form work ( if 20 mm metal is used in
place of 40mm metal in item number 04.13 & 04.15),
63.04.16.2 (b) C.C. 1:3:6 (1cement, 3sand, 6metal), cum 3225.98

Page 3 of 39
Item No Specification Unit Rate
Extra rate for providing and fixing in position upto floor two level, units of
63.04.17 precast C.C. work of any mix fixing in cement mortar 1:2 and finishing with cum 2056.12
cement plaster 6mm thick in cement mortar 1:3 including scaffolding,
Providing and laying damp proof course 50mm thick with C.C.1:2:4 with 20mm
63.04.20 sqm 259.06
size graded stone aggregate. including curing.,
Applying one coat of hot bitumen (80/100) or equivalent using 1.7kg. Per sqm
63.04.21 On damp proof courses after cleaning the surface with brushes and finally with sqm 91.93
a piece of cloth tightly soaked in kerosene oil.,
Plum cement concrete 1:2:4 with 75% graded metal of 40mm size and 25%
63.04.22 cum 2506.26
plums of 150mm size.,
Plum cement concrete 1:3:6 with 75% graded metal of 40mm size and 25%
63.04.23 cum 2275.65
plums of 150mm size.,
Plum cement concrete 1:4:8 with 75% graded metal of 40mm size and 25%
63.04.24 cum 2071.11
plums of 150mm size.,
Providing and placing in position RCC for roof, beams, columns column footing
63.04.25 lintels chhajjas, balcony, stairs etc, excluding cost of reinforcement but including
centring, shuttering, proping, finishing & curing etc.complete.,

63.04.25.1 (a) CC 1:1:2 (1 cement, 1 sand, 2 graded stone aggregate 20mm nominal size), cum 6626.17
(b) CC 1:1.5:3 (1 cement, 1.5 sand, 3 graded stone aggregate 20mm nominal
63.04.25.2 cum 5704.15
size),
63.04.25.3 (c) CC 1:2:4 (1 cement, 2 sand, 4 graded stone aggregate 20mm nominal size), cum 5234.6
289.15
63.04.39 Brick bat filling in trenches or soak pits., cum

Centering and shuttering including strutting , propping etc. and removal of form
63.04.41 sqm 154.1
work for P.C.C. work in foundation, footing, bases for column,
Filling foundation or under floor with 40mm gauge graded metal and moorum
63.04.42 cum 1312.85
including ramming in layers and watering.,
63.04.46 False work for R.C.C. and P.C.C. work in plinth and foundation., sqm 161.65
Labour only for dressing stones hammer or rough dressed for C. R. masonry
63.05.01 cum 471.64
work second sort.,
Random/ uncoursed rubble masonry in plinth and foundation, stones laid dry,
63.05.02 well bounded, faced with selected stones and built with through stones evenly cum 1172.45
placed at the rate of two per sqm,
Random / uncoursed rubble masonry in plinth and foundation including levelling
63.05.06 up with cement concrete 1:6:12 (1cement, 6coarse sand, 12 aggregate 20mm
nominal size) at plinth level.,
63.05.06.3 (c) In Cement mortar 1:4 (1cement, 4sand), cum 2895.07
63.05.06.4 (d) In Cement mortar 1:5 (1cement, 5sand), cum 2891.94
63.05.06.5 (e) In Cement mortar 1:6 (1cement, 6sand), cum 2767.33
63.05.06.6 (f) In Cement mortar 1:8 (1cement, 8sand), cum 2601.17
63.05.08 Coursed rubble masonry second sort in plinth and foundation.,
63.05.08.3 (c) In Cement mortar 1:3 (1cement, 3sand), cum 3503.63
63.05.08.4 (d) In Cement mortar 1:4 (1cement, 4sand), cum 3258.17
63.05.08.5 (e) In Cement mortar 1:5 (1cement, 5sand), cum 3126.01

Page 4 of 39
Item No Specification Unit Rate
63.05.08.6 (f) In Cement mortar 1:6 (1cement, 6sand), cum 3012.72
63.05.08.7 (g) In Cement mortar 1:8 (1cement, 8sand), cum 2861.68
Stone shelves fixed in walls in cement mortar 1:3 (1cement, 3sand) I/c finishing
63.05.10
complete.,
63.05.10.1 (a) 30 mm thick, sqm 339.24
63.05.10.2 (b) 40 mm thick, sqm 351.86
63.05.10.3 (c) 50 mm thick, sqm 402.34
Providing and fixing in cement mortar 1:6 (1cement, 6sand) flag stone slab over
63.05.12
drains.,
63.05.12.1 (a) 30 mm thick, sqm 282.54
63.05.12.2 (b) 40 mm thick, sqm 295.16
63.05.12.3 (c) 50 mm thick, sqm 345.65
Providing and fixing chhajja (sun shed) of stone 40mm thick and upto 80cm
63.05.14 sqm 455.62
wide beyond the wall in cement mortar 1:4 I/c pointing in cement mortar 1:2.,
Extra rate for C.R./ R.R./ U.C.R. stone masonry in super structure above plinth
63.05.16 cum 265.25
level upto floor two level.,
Extra rate for laying stone work in or under water and or liquid mud including
63.05.17 cost of pumping or bailing out water and removing slush etc, complete etc.(For cum 79.04
every 0.3 meter depth),
Providing and fixing fine dressed cut stone lintels of any size including setting in
63.05.18 cum 10393.41
C.M. 1:2.,
63.06.05 Class 25 open bhatta or pajawa burnt brick masonry in plinth and foundation.,
63.06.05.7 (g) Cement mortar 1:3 (1cement, 3sand), cum 4156.68
63.06.05.8 (h) Cement mortar 1:4 (1cement, 4sand), cum 3984.87
3892.35
63.06.05.9 (i) Cement mortar 1:5 (1cement, 5sand), cum
63.06.05.10 (j) Cement mortar 1:6 (1cement, 6sand), cum 3813.06
63.06.05.11 (k) Cement mortar 1:8 (1cement, 8sand), cum 3707.32
63.06.06 Add for masonry in supper structure above plinth level up to floor two level cum 216.09
63.06.07 Add extra for brick masonry in square or rectangular pillars., cum 259.48
Add extra for brick masonry circular in plan, I/c wells to a mean radius not
63.06.09 cum 399.15
exceeding 6m (Such as well stening and other similar type of works),

Half brick masonry in class 25 open bhatta or pajawa burnt brick in super
63.06.14
structure including placing of 6mm iron bar at every 3rd layer of brick.,
541.60
63.06.14.1 (a) In cement mortar 1:3, sqm
63.06.14.2 (b) In cement mortar 1:4, sqm 520.7
Honey comb brick masonry with class 25 open bhatta or pajawa burnt brick
63.06.18
10cm Thick.,
63.06.18.1 (a) In cement mortar 1:3, sqm 305.68
285.05
63.06.18.2 (b) In cement mortar 1:4, sqm
63.06.24 Add to item no.0605 and 0609 for well staining,
243.10
63.06.24.1 (a) For every 3meter up to 15 meter depth., cum

Page 5 of 39
Item No Specification Unit Rate
63.06.26 Fly Ash brick masonry in plinth and foundation.,
63.06.26.8 (h) Cement mortar 1:4 (1cement, 4sand), cum 4108.09
63.06.26.9 (i) Cement mortar 1:5 (1cement, 5sand), cum 4015.58
63.06.26.10 (j) Cement mortar 1:6 (1cement, 6sand), cum 3936.26
Providing and fixing flush door shutters, solid core construction, decorative type
with skins of decorative veneered particle boards and block board core, with
63.07.20
frame of first class hard wood with particle board veneered particle board face
panels including black enamelled M.S. butt hinges with necessary screws.,
63.07.20.2 (b) 30 mm thick (double leaf), sqm 1969.11
63.07.20.3 (c) 25 mm thick (double leaf), sqm 1719.73
Providing and fixing flush door shutters, solid core construction, Non decorative
type (paintable) with skins of particle boards unveneered and block board core,
63.07.21
with frame of first class hard wood with particle board veneered particle board
face panels including black enamelled M.S. butt hinges with necessary screws.,
63.07.21.1 (a) 40 mm thick (double leaf), sqm 1681.1
63.07.21.2 (b) 30 mm thick (double leaf), sqm 1181.94
63.07.21.3 (c) 25 mm thick (double leaf), sqm 1100.11
Providing and fixing flush door shutters, solid core construction, Non decorative
type (paintable) with skins of particle boards veneered with commercial veneers
63.07.22 and block board core, with frame of first class hard wood with particle board
veneered particle board face panels including black enamelled M.S. butt hinges
with necessary screws.,
63.07.22.1 (a) 40 mm thick (double leaf), sqm 1624.86
63.07.22.2 (b) 30 mm thick (double leaf), sqm 1421.76
63.07.22.3 (c) 25 mm thick (double leaf), sqm 1352.56
Providing and fixing flush door shutters, hollow core construction, decorative
type with skins of decorative veneered particle boards with frame of first class
63.07.23
hard wood, with particle board or veneered particle board face panels including
black enamelled M.S. butt hinges with necessary screws.,
63.07.23.1 (a) 40 mm thick (double leaf), sqm 1751.18
Providing and fixing plain Asbestos cement sheet ceiling with butt jointing and
63.08.01 wood screws (frame work and cover fillets to be measured and paid separately) sqm 285.43
B class 5mm Thick A.C. sheet.,
Providing and fixing hessian cloth ceiling with nails (frame work and cover fillets
63.08.03 sqm 63.33
to be measured and paid separately),
Providing and fixing fiber hard board sheet, lining with but jointing and nails
63.08.05
(frame work and cover fillets to be measured and paid separately) .,
63.08.05.2 (b) Normal hard boards 5 mm thick, sqm 106.8
63.08.05.3 (c) Normal hard boards 6 mm thick, sqm 133.99
Steel work in single section including in cutting, hoisting fixing in position in R.S.
63.09.01 kg 63.43
joists, channels, angles, tee.,
Steel work welded in built up sections, framed work, including cutting hoisting
fixing in position in gratings, frames, guard bars, ladders, railing, brackets and
63.09.02 kg 84.53
similar works & trusses and trussed purlins up to 25m span and 15 m over all
height,

Page 6 of 39
Item No Specification Unit Rate
Steel work in built up tubular trusses including cutting, hoisting, fixing in
63.09.03 position, welded and bolted including special shaped washers etc. complete of kg 64.77
Mild steel tubes, electric resistant or induction butt welded,

Providing and placing in position tested steel for R.C.C. work including cutting,
63.09.04 bending, binding etc. as per drawings and placing in position complete up to
floor two level including cost of binding wire and all wastage etc. complete.,
63.09.04.1 (a) Mild steel and Medium tensile steel bars, kg 68.79
63.09.04.2 (b) Cold twisted / Hot rolled deformed / Thermo mechanicaly treated steel bars, kg 71.59
63.09.07 Providing hard drown steel for R.C.C. work upto floor two level., kg 51.16
Providing and fixing in position collapsible steel shutters with vertical channels
20mm x 10mm x 2mm braced with flat iron diagonals 20mm x 5mm size with
63.09.09 sqm 4827.45
top and bottom rails of T-iron 40mm x40mm x6mm with 38mm dia steel pulleys
complete with bolts and nuts, locking arrangements, stoppers, handles.,

Providing and fixing rolling shutters of approved make, made of 80mm wide
M.S. Leith interlocked together through their entire length and jointed together
63.09.11 at the ends by end locks mounted on specially designed pipe shaft, with
brackets plates guide channels and locking with push pull operation complete
including the cost of hood over and spring.,
63.09.11.2 (b) 80 x 1.20mm M.S. laths with 1.20mm thick top cover, sqm 1560.89
63.09.11.3 (c) 80 x 0.90mm M.S. laths with 0.90mm thick top cover, sqm 1482.06
Providing and fixing 27.5cm long wire spring grade No.2 approved make for 259.70
63.09.13 no
rolling shutters.,
63.09.14 Providing and fixing hood cover for rolling shutters.,
63.09.14.2 (b) 1.20mm thick, metre 254.4
63.09.14.3 (c) 0.90mm thick, metre 190.82
Fixing standard steel doors, windows and ventilators in walls with 16 x 3.15mm
to 10cm long embedded in cement concrete block 15 x 10cm x10cm size, of
1:3:6 (1cement, 3coarse sand, 6stone aggregate 20mm nominal size) or with
63.09.16 wooden plugs and screws or rawl plugs & screws or with fixing clips or worth sqm 139.1
bolts and nuts as required, (only steel doors/ windows/ ventilators shall be
supplied for fixing free of cost at site of work or cost of supply of one or more of
these material (s) shall be paid under separate items (s),

Providing and fixing pressed steel door frames manufactured from commercial
mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead
and if required angle threshold of mild steel angle of section 50 X 25mm, or
63.09.18 base ties of 1.25mm pressed mild steel welded or rigidly fixed together by
mechanical means, adjustable lugs with split end tail to each jamb including
steel butt hinges 2.5mm thick with mortar guards, lock strike- plate and shock
absorbers as specified as directed by Engineer-in -charge.,
63.09.18.1 (a) Profile A (single rabate 80mm X 50mm size), metre 248.65
63.09.18.2 (b) Profile B (single rabate 100mm X 50mm size), metre 280.76
63.09.18.3 (c) Profile C (double rabate 115mm X 50mm size), metre 296.82

Page 7 of 39
Item No Specification Unit Rate
Providing and fixing in position door shutters made up of cold rolled framed
profiles of pressed steel made from commercial M.S. sheet I/c buzzers(shock
63.09.19 absorbers) lock, 30cm Long strike plate and necessary tower bolts, aldrop
300x16mm Etc. complete, painted with red oxide primer paint manufactured by
standard make.,
63.09.19.1 (a) Single panel shutter type-A (Made of 1.00mm C.R. sheet), sqm 1151.39
63.09.19.2 (b) Single panel shutter type-B (Made of 0.8mm C.R. sheet), sqm 1046.72
63.09.19.3 (c) Double panel shutter type-A (Made of 1.00mm C.R. sheet), sqm 1413.08
63.09.19.4 (d) Double panel shutter type-B (Made of 0.8mm C.R. sheet), sqm 1308.4
Providing and fixing M.S. round or square bars at required spacing in wooden
frames of windows and clear-story windows including standard threads at the
63.09.20 kg 81.04
ends of M.S. round window bars I/c cost of standard hexagonal nuts and
washers at both ends.,
Providing and fixing M.S. round or square bars with M.S. flats at required
63.09.21 kg 72.06
spacing in wooden frames of windows and clerestory windows.,
Providing and fixing M.S. grills of required pattern to wooden frames of
63.09.22 windows etc. with M.S. flats at required spacing and frame around, round or kg 103.52
square bars with round headed bolts and nuts or by screws.,
Providing and fixing M.S. round holding down or anchor bolts with nuts and 75.18
63.09.23 kg
washer plates complete.,
Providing and fixing M.S. fan clamp type I of 16mm dia. M.S. bar bent to shape
63.09.24 with hooked ends in RCC slabs during laying including painting the exposed each 121.22
portion of loops all as per standard design complete.,

63.09.25 Providing and fixing turn buckets and straining bolts for barbed wire fencing., each 124.16

Providing and fixing fencing consisting 5 horizontal and 2 diagonals rows of G.I
Barbed Wire(minimum weight 9.38 Kg/100mt. As per IS 278:1962 Type 1), M.S.
angle iron post 50x50x6mm (confirming to I.S. 225) 1.50 metre height above
ground level and 0.30 m below ground level, c/c spacing of each post shall not
exceed 2.25 m with diagonal strut to hold the fencing in line & level. Angle of
63.09.26 size 50x50x6mm, length 1.00 m at every fourth post fixed with nuts, bolts I/c metre 369.77
applying a priming coat of steel primer & painting with black paint to posts &
struts etc. complete including securing and screwing with G.I. tying wire, G.I.
Staples, G.I. U-Nails or steel pins etc. complete with cost of excavation & filling
cement concrete M-15 grade for fixing posts & struts to the pit of size
0.30x0.30x0.30 M for each post and struts etc. complete.,

If M.S. angle iron post 40x40x5mm used in place of M.S. angle iron post
63.09.27.1 metre 286
50x50x6mm in item 09.26,
If Wooden ballies Sal 125mm dia used in place of M.S. angle iron post
63.09.27.2 metre 165.72
50*50*6mm in item 09.26,

Page 8 of 39
Item No Specification Unit Rate
Providing and fixing barbed wire fencing with 5 rows of horizontal barbed wire
and 2 digonal rows tightened to RCC post as per IS:4996-1984, 2M long, 1.4 m
above and 0.6 m belowe ground level, c/c spacing of each post shall not exceed
3M with diagonal strut at every 30M to hold the fencing in line and level. Top
and bottom section of RCC post shall be 100mm X 100mm and 150mm X
150mm respectively, with iron pins casted in post. The weight of two ply GI
63.09.30 metre 219.53
barbed wire shall not be less than 9.38 kg per 100 m lenght of wire. The RCC
post shall be casted in M-20 cement concrete as per IS:456-2000, with
reinforcement as per IS:432-1982, 10mm dia 4 nos longitudinal bars and 6mm
dia stirrups @ 150mm c/c, complete with cost of excavation & filling cement
concrete M-15 grade for fixing posts & struts to the pit of size 0.30x0.30x0.60 M
for each post and struts etc. complete.,

Providing and fixing barbed wire fencing with 5 rows of horizontal barbed wire
and 2 digonal rows tightened to RCC post as per IS:4996-1984, 1.85M long, 1.25
m above and 0.6 m belowe ground level, c/c spacing of each post shall not
exceed 3M with diagonal strut at every 30M to hold the fencing in line and
level. Top and bottom section of RCC post shall be 85mm X 85mm and 125mm X
125mm respectively, with iron pins casted in post. The weight of two ply GI
63.09.31 metre 176.89
barbed wire shall not be less than 9.38 kg per 100 m lenght of wire. The RCC
post shall be casted in M-20 cement concrete as per IS:456-2000, with
reinforcement as per IS:432-1982, 6mm dia 4 nos longitudinal bars and 3.15mm
dia stirrups @ 100mm c/c, complete with cost of excavation & filling cement
concrete M-15 grade for fixing posts & struts to the pit of size 0.30x0.30x0.60 M
for each post and struts etc. complete.,

Providing & fixing of stop dam Kari shutters each of 40 to 60 cm height and
width as per size of opening of stop dam, according to specific requirement of
engineer in charge (for height & width of shutter). Kari shutters shall be
fabricated with 3mm thick MS sheet on frame of MS angle 35x35x5mm size
73.14
63.09.32 with two diagonal stiffeners of MS angle 35x35x5mm. For shutter having width kg
more than 1.00m, one extra horizontal stiffener of MS angle size 35x35x5mm
shall be provided at center, including priming coat on shutter complete. The
rate of shutter includes filling the space between Kari shutter by B.C. soil with
watering and ramming.,
63.10.05 10mm thick cement plaster on fair side of wall in,
63.10.05.1 (a) Cement mortar 1:3 (1cement, 3sand), sqm 115.55
63.10.05.2 (b) Cement mortar 1:4 (1cement, 4sand), sqm 106
63.10.05.3 (c) Cement mortar 1:5 (1cement, 5sand), sqm 100.86
63.10.05.4 (d) Cement mortar 1:6 (1cement, 6sand), sqm 96.45
63.10.07 15mm thick cement plaster on rough side of wall in,
162.62
63.10.07.1 (a) Cement mortar 1:3 (1cement, 3sand), sqm
63.10.07.2 (b) Cement mortar 1:4 (1cement, 4sand), sqm 147.86
63.10.07.3 (c) Cement mortar 1:5 (1cement, 5sand), sqm 139.91
63.10.07.4 (d) Cement mortar 1:6 (1cement, 6sand), sqm 133.1
63.10.11 6mm cement plaster to Ceiling.,
63.10.11.1 (a) In Cement mortar 1:3 (1cement, 3sand), sqm 125.17
63.10.11.2 (b) In Cement mortar 1:4 (1cement, 4sand), sqm 119.09

Page 9 of 39
Item No Specification Unit Rate
Extra rate for finishing with a floating cot of neat cement slurry over cement
63.10.15 sqm 36.97
plaster of any thickness.,
63.10.21 Pointing on brick work with cement mortar 1:3 (1cement, 3sand),
63.10.21.1 (a) Flush pointing, sqm 100.16
63.10.21.2 (b) Ruled pointing, sqm 103.43
63.10.21.3 (c) Raised and cut pointing, sqm 165.9
63.10.22 Pointing on brick work with cement mortar 1:4 (1cement, 4sand),
63.10.22.1 (a) Flush pointing, sqm 97.55
63.10.22.2 (b) Ruled pointing, sqm 100.82
63.10.22.3 (c) Raised and cut pointing, sqm 161.56
63.10.32 Pointing on CR masonry with cement mortar 1:3 (1cement, 3 sand),
86.13
63.10.32.1 (a) Flush pointing, sqm
63.10.32.2 (b) Ruled pointing, sqm 88.44
63.10.32.3 (c) Raised and cut pointing, sqm 141.91
63.10.33 Pointing on CR masonry with cement mortar 1:4(1cement, 4sand),
63.10.33.1 (a) Flush pointing, sqm 84.5
63.10.33.2 (b) Ruled pointing, sqm 86.8
63.10.33.3 (c) Raised and cut pointing, sqm 138.63
Pointing on random rubble masonry or uncoursed stone masonry with cement
63.10.36
mortar 1:3 (1cement, 3sand),
63.10.36.1 (a) Flush pointing, sqm 101.15
63.10.36.2 (b) Ruled pointing, sqm 104.61
63.10.36.3 (c) Raised and cut pointing, sqm 174.45
Pointing on random rubble masonry or uncoursed stone masonry with cement
63.10.37
mortar 1:4 (1cement, 4sand),
63.10.37.1 (a) Flush pointing, sqm 99.52
63.10.37.2 (b) Ruled pointing, sqm 102.98
63.10.37.3 (c) Raised and cut pointing, sqm 171.18
63.10.41 Pointing on flag stone flooring in,
63.10.41.1 (a) In Cement mortar 1:2 (1cement, 2sand), sqm 82.89
63.10.41.2 (b) In Cement mortar 1:3 (1cement, 3sand), sqm 81.04
Providing corrugated C.I. sheet of class III roofing fixed with galvanised iron J or
63.11.01 L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or
with complete excluding the cost of purlins, rafters and trusses.,
625.64
63.11.01.1 (a) 0.63 mm thick sheet., sqm
63.11.01.2 (b) 0.80 mm thick sheet., sqm 753.24
Providing ridges or hips 600mm over all in plain G.I. sheet class III fixed with
63.11.03 galvanised iron J or L hooks bolts and nuts 8mm diameter G.I. limpet bitumen
washers complete.,
63.11.03.1 (a) 0.63 mm thick sheet., metre 437.45
63.11.03.2 (b) 0.80 mm thick sheet., metre 504.91
Providing valleys 900mm over all in plain1.6mm thick G.I. sheet class III fixed
63.11.04 with galvanised iron J or L hooks bolts and nuts 8mm diameter G.I. limpet metre 979.22
bitumen washers complete.,

Page 10 of 39
Item No Specification Unit Rate
Providing 6mm thick corrugated asbestos cement sheets roofing fixed with
63.11.06 galvanised iron J or L hooks bolts and nuts 8mm dia. G.I. plain and bitumen sqm 312.51
washer complete excluding the cost of purlines rafters and trusses.,

Providing and fixing ridges hips in asbestos cement sheet roofing with G.I. J or L
63.11.08
hooks bolts and nuts 8mm dia. G.I. plain and bitumen washer complete .,
63.11.08.1 (a) Close fitting adjustable ridge, metre 369.51
63.11.08.2 (b) Unserrated adjustable hips., metre 303.22
Providing stone slab roofing and laying in cement mortar 1:4 (1cement, 4sand)
over R.S. joists or R.C.C. battens (R.S. joists and R.C.C. battens to be paid
63.11.20
separately) including pointing the exposed joints with the same mortar
complete.,
63.11.20.1 (a) Red stone slab 40 mm thick., sqm 308.51
63.11.20.2 (b) Red stone slab 50 mm thick., sqm 390.27
Providing and fixing of broken ceremic tiles with neat cement, curing etc. (for
63.11.38 sqm 268.57
low cost House),
Providing and fixing cut stone slab (chisel dressed) for roofs including flush
pointing of the bottom in C.M. 1:3 (1cement, 3sand) and filling the joints in C.M.
63.11.39 cum 8975.9
1:4 (1cement, 4sand) including fixing in chased grooves in walls, curing etc.
complete.,

Providing & fixing of precoated galvanised iron profile sheets (size,shape & pitch
of corrugation as approved by engineer in charge) 0.5mm +/- 5% total coated
thickness(TCT) thick zinc coating 120 gsm as per IS:277 in 240mpa steel grade,5-
7 microns appoxy primer on both side of the sheet and polyester top coat 15-18
microns.Sheet should have protective guard film of 25 microns min. to avoid
scratches while transportation and should be supplied in single length up to 12
63.11.41 sqm 575.51
mtr or as desired by engineer-in-charge.The sheet shall be fixed using self
drilling / self tapping screws of size 5.5x55mm with EPDM seal or with polymer
coated J or L hooks,bolts and nuts 8mm dia. with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with white lead complete upto any
pitch in horizontal/vertical or curved surfaces excluding the cost of purlins,
rafters and trusses and i/c cutting to size and shape wherever required.,

Providing & fixing of precoated galvanised steel sheet roofing accessories


0.5mm +/- 5% total coated thickness(TCT) zinc coating 120 gsm as per IS:277 in
240mpa steel grade,5-7 microns appoxy primer on both side of the sheet and
63.11.42 polyester top coat 15-18 microns. using self drilling / self tapping screws of size metre 564.29
5.5x55mm with EPDM seal or with polymer coated J or L hooks,bolts and nuts
8mm dia. and or G.I. seam bolts and nuts,G.I. plain and bitumen washers
complete. Ridges plain (500 - 600mm),

Page 11 of 39
Item No Specification Unit Rate
Providing & fixing of precoated galvanised steel sheet roofing accessories
0.5mm +/- 5% total coated thickness(TCT) zinc coating 120 gsm as per IS:277 in
240mpa steel grade,5-7 microns appoxy primer on both side of the sheet and
63.11.43 polyester top coat 15-18 microns. using self drilling / self tapping screws of size metre 755.81
5.5x55mm with EPDM seal or with polymer coated J or L hooks,bolts and nuts
8mm dia. and or G.I. seam bolts and nuts,G.I. plain and bitumen washers
complete. Gutter ( 600mm over all girth).,
Rough chisel dressed sand stone flooring over 20mm average thick base of
63.12.10 cement mortar 1:5 (1cement, 5sand) with joints finished flush (Area of each
stone should not be less than 0.20 Sqm.),
443.36
63.12.10.2 (b) With 40 mm thick stone, sqm

40mm cement concrete flooring with 25mm under layer of cement concrete
1:3:6 (1cement, 3sand, 6stone aggregate of size 12.5mm and below) and 15mm
63.12.18 sqm 307.2
wearing (1cement, 2 to 3 stone aggregate of size 4.75mm and below) laid in
interval with base course and finished with a floating coat of neat cement.,
Cement concrete flooring 1:2:4 (1cement, 2sand, 4graded stone aggregate,
63.12.20 20mm nominal size) laid in one layer and finished with floating coat of neat
cement.,
63.12.20.1 (a) 40 mm thick., sqm 243.59
Cement concrete pavement (25mm to 50mm thick) with 1:2:4 (1cement, 2sand,
63.12.22 4graded stone aggregate 20mm nominal size) i/c finished with floating coat of cum 4453.5
neat cement.,
15mm cement plaster skirting upto 30cm height with cement mortar 1:3 (1
63.12.25 cement, 3 sand) with a floating coat of neat cement i/c rounding of junction sqm 227.23
with floor.,
63.12.29 Extra for providing and fixing glass strips in joints of floors,
63.12.29.1 (a) 40 mm wide 4 mm thick., metre 23.29
Kota stone slab flooring over 20mm thick base of C.M. 1:6 laid over and jointed
with grey cement slurry mixed with pigment to match the shade of slab
63.12.54
including grinding, rubbing & polishing etc. complete. (Area of each stone
should not be less than 0.20 Sqm.),
63.12.54.1 (a) 25 mm thick., sqm 1052.01
22cm thick grouted stone pitching (without quarry spalls) with individual stones
63.12.70 sqm 792.24
of 22cm depth in minimum size 0.014cum grouting in cement mortar 1:6,
22cm thick dry stone picked up boulder pitching i/c picking of boulder with
63.12.74 sqm 195.1
individual size of 22cm depth.
63.12.75 Add extra item no. 1274 for quarried boulder pitching., sqm 154.24
63.12.77 Providing stone chips under stone pitching, sqm 450.35
40 to 50mm thick flag stone flooring laid over 20mm thick cement mortar (1:6)
63.12.81 sqm 513.36
bedding I/n cement pointing in cement mortar 1:3,
Removing old paint or polish from wood and wood based surfaces with caustic
63.13.01 sqm 28.35
soda solution and making the surface even.,
63.13.05 Washing and cleaning of decorated wall surfaces with soap, soda and water., sqm 6.06

Page 12 of 39
Item No Specification Unit Rate
White washing whith lime on undecorated wall surfaces (two coats) to give an
63.13.08 even shade including thoroughly broomed the surface to remove all dirt, dust, sqm 9.62
mortar drops and other foreign matter.,
Colour washing 2 coats over and including a primary coat of white washing on
63.13.11 sqm 15.88
undecorated wall surface.,
63.13.14 Cement washing (Portland cement) 3 coats.,
63.13.14.1 (a) Gray cement, sqm 24.56
63.13.14.2 (b) White cement, sqm 28.3
63.13.15 Cement washing (Portland cement) 2 coats.,
63.13.15.1 (a) Gray cement, sqm 16.38
63.13.15.2 (b) White cement, sqm 18.88
63.13.16 Cement washing (Portland cement) 1 coats.,
63.13.16.1 (a) Gray cement, sqm 8.21
63.13.16.2 (b) White cement, sqm 9.49
63.13.18 Snowcem or durocem painting of any shade,
63.13.18.1 (a) 2 coats on new work, sqm 21.69
63.13.18.2 (b) 1 coats on old work, sqm 10.91
Distempering with dry distemper of approved brand and manufacture (two
coats) and of required shade on undecorated wall surfaces to give an even
63.13.20 shade, over and including priming coat of whiting after thoroughly brushing the sqm 49.72
surface free from mortar dropping and other foreign matter including preparing
the surface even and sand papered smooth.,
Oil bound distemper of approved quality of any shade two coats on new works
63.13.23 sqm 79.44
including priming coat.,
Painting with enamel paint, brushing, interior to give an even shade I/n cleaning
63.13.35 the surface of all dirt dust and other foreign matter on steel and other metal
surfaces.,
63.13.35.1 (a) 3 coats, sqm 103.92
63.13.35.2 (b) 2 coats, sqm 65.79
63.13.35.3 (c) 1 coats, sqm 37.82
Construction of Black Board surface on wall in C.M. 1:3 (Projecting 6 mmm. out
of plastered surface of walls including painting with black board paint and
63.16.15 sqm 200.09
finishing to the true shape and size with 40 mm wide alround boarder of cement
mortar 1:3,
Boring holes with auger in all types of soil upto 5m depth below G.L. including
63.17.01
collection samples.,
63.17.01.1 (a) 200 mm dia, metre 290.86
63.17.01.2 (b) 250mm dia, metre 380.26
63.17.01.3 (c) 300 mm dia, metre 447.48
63.17.02 Chain and compass survey.,
63.17.02.1 (a) Headworks/Other Works, km 1342.44
63.17.02.2 (b) Canals/Roads, km 894.96
63.17.03 Chain and Theodolite survey.,
63.17.03.1 (a) Headworks/Other Works, km 1342.44
63.17.03.2 (b) Canals/Roads, km 894.96
Theodolite work involving fixing of stones at every tenth chain, tangent, apex 2684.88
63.17.04 km
and vertex points final alignment.,
63.17.05 Fly levelling for fixing temporary bench marks.,
63.17.05.1 (a) Upto 15 m interval, km 1342.44

Page 13 of 39
Item No Specification Unit Rate
63.17.05.2 (b) Above 15 m interval, km 671.22
63.17.06 Levelling - Headwork.,
63.17.06.1 (a) Below 5 m interval, km 2237.4
63.17.06.2 (b) 5 to 10 m interval, km 1789.92
1342.44
63.17.06.3 (c) More then 10 but seat upto 15 m interval, km
63.17.06.4 (d) Above 15 m interval, km 715.97
63.17.07 Double levelling for transfer of bench marks.,
63.17.07.1 (a) Upto15 m interval, km 5369.76
63.17.07.2 (b) Above 15 m interval, km 2684.88
Construction of temporary approach road of 2.5m average width for survey
63.17.08 vehicle, involving cutting of field boundaries, providing ramps at depressions
and touching the uneven surface and jungle clearance.,
11187.00
63.17.08.1 (a) In non-hilly terrain, km
22374.00
63.17.08.2 (b) Hilly terrain, km
63.17.09 Catchment area survey.,
1342.44
63.17.09.1 (a) Chain and compass survey along ridge line, km
2684.88
63.17.09.2 (b) Levelling along ridge line and cross sections, km
Collection of hard metal other then black trap basalt and granite for road works
63.18.04 (without blasting) including stacking as per MOST 1995, clause 400.2.5 (a) cum 357.98
Grading - 1 (Size ranging from 90 mm to 45 mm),
Collection of hard metal other then black trap basalt and granite for building
63.18.05 cum 491.23
work (without blasting) . (a) 40 mm nominal size,
Deduct from item 1804 and 1805 above for metal breaking with Govt. boulders
63.18.06 cum 156.52
and excavated rock.,
Collection of stone chips. quarry spalls or rubble (maximum size 0.004cum)
63.18.09
Black trap, basalt or granite.,
63.18.09.1 (a) Other then black trap Basalt or granite, cum 167.66
63.18.09.2 (b) Black trap Basalt or granite, cum 187.94
Collection of rubble masonry (size 0.014cum to 0.06cum) other then black trap,
63.18.11 cum 596.83
basalt or granite.,
Collection of face stones for dam masonry hammer dressed on face, with one
line chisel dressed 75mm depth from face on bed, top and sides and hammer
dressed below 75mm depth of the stone up to rear face beyond this depth of
63.18.12 75mm the stones may taper, but minimum length specified having at least half
the area of the face, comprising of hammer dressed size for coursed rubble
masonry rectangular in shape (maximum size 0.014cum to 0.06cum) including
20%headers. Other then black trap, basalt or granite.,
63.18.12.1 (a) Stretcher- size 55 x 35 x 30 cm, each 195
63.18.12.2 (b) Header- size 60 to 45 x 30 x 30 cm, each 204.67
63.18.12.3 (c) Bond stone-size 70 to 60 x 30 x 30 cm, each 229.85
Collection of pitching stones size 20 to 25cm and not less then 0.021cum
63.18.13
(without dressing),
63.18.13.1 (a) Other then black trap Basalt or granite, cum 283.6
63.18.13.2 (b) Black trap Basalt or granite, cum 322.28

Page 14 of 39
Item No Specification Unit Rate
Collection of pitching stones size 28 to 32cm and not less then 0.024cum
63.18.14
(without dressing),
63.18.14.1 (a) Other then black trap Basalt or granite, cum 238.85
63.18.14.2 (b) Black trap Basalt or granite, cum 268.79
63.18.15 Extra rate for blasting for item 1804 and 1805,
63.18.15.1 (a) Other then black trap Basalt or granite, cum 57.04
63.18.15.2 (b) Black trap Basalt or granite, cum 142.61
63.18.17 Stacking and boxing.,
63.18.17.1 (a) Moorum or sand, cum 22.37
63.18.17.2 (b) Metal, single or gravel, cum 37.99
63.18.18 Stacking without boxing.,
63.18.18.1 (a) Puddle earth, sand or kankar, cum 15.66
63.18.18.2 (b) Metal, single, stone chips or quarry spalls, cum 20.09
63.18.18.3 (c) Masonry stones, pitching stones or boulders, cum 40.27
63.18.19 Screening
63.18.19.1 (a) Metal, shingle or gravel, cum 55.92
63.18.19.2 (b) Sand, cum 40.27
Washing sand, metal, shingle or gravel (Payable on prior written permission of
63.18.20 cum 111.87
S.E.),
63.18.21 Collection of boulders or rubble from excavated materials., cum 71.6
63.18.23 Collection of through/ bond stones., cum 1075.79
Transportation charges of water for every additional 200m or part thereof,
63.19.01
beyond initial lead of 200m up to 2 Km. Lead for -
(a) Consolidation of Moorum /earth work (rate for 1Cum. of Moorum /earth
63.19.01.1 cum 2.18
work)
63.19.01.3 (c) Construction of masonry or concrete(rate for 1Cum. of masonry or concrete) cum 11.98
63.19.01.4 (d) Metal consolidation of W.B.M. Road(rate for 1Cum. of Metal) cum 4.79
63.19.02 Transportation of Metal
63.19.02.1 (a) 0.5 Km. Lead cum 99.76
63.19.02.2 (b) 1.0 Km. Lead cum 108.05
63.19.02.3 (c) 1.5 Km. Lead cum 116.31
63.19.02.4 (d) 2.0 Km. Lead cum 124.25
63.19.02.5 (e) 2.5 Km. Lead cum 132.22
63.19.02.6 (f) 3.0 Km. Lead cum 140.12
63.19.02.7 (g) 3.5 Km. Lead cum 147.84
63.19.02.8 (h) 4.0 Km. Lead cum 155.48
63.19.02.9 (i) 4.5 Km. Lead cum 162.96
63.19.02.10 (j) 5.0 Km. Lead cum 170.34
Rolling & Compaction of granular sub-base of well graded material, spreading in
uniform layers with tractor mounted grader on prepared surface, mixing by mix
in place, sprinkling of water till OMC, and compacting with smooth wheel rollers
63.20.08 cum 51.51
of 80 to 100 kN static weight to achieve the desired density, complete as per
Technical Specification Clause 401 of Specification for Rural Roads.i/c all leads of
water etc. complete.,

Page 15 of 39
Item No Specification Unit Rate
Rolling and consolidating water bound mecadam coat with any size of metal of
any thickness upto 100mm thickness(including rolling screening or binding
63.20.10 materials) including watering & filling in depressions which occur during the
process with power roller exceeding 8 tonne as per MOST 2004 clause 404.3.4
to 404.3.8,
63.20.10.1 (a) Including hire and running expenses of roller, sqm 10.05
1.11
63.20.10.2 (b) Excluding hire and running expenses of roller, sqm

Providing laying and compacting of W.B.M. sub base/ base course including
preparation and compaction of sub base and spreading of clean and crushed
63.20.14 aggregate to proper grade and camber including application of screenings for
interlocking, sprinkling of water and rolling with power roller as per clause 404
(excluding inverted choke and scarifying of existing bitumenous surfaces) for-,
63.20.14.2 Grading No. 2 Material, (63 to 45mm size) with moorum as screening, cum 926.97
63.20.14.3 Grading No. 3 Material, (53 to 22.4mm size) with moorum as screening, cum 974.49
Providing and applying evenly a priming coat with the bituminous emulsion @
63.20.21 sqm 34.77
9kg./10 sqm,
Providing tack coat as per MOST clause 503 over existing primed surface with
63.20.22
bituminous emulsion.,
63.20.22.2 Granular surface (Primed)/ Cement concrete surface @ 3.00 kg./10 Sqm. area., sqm 14.42

2cm consolidated thick single coat premix carpet surfacing with 0.27cum of
stone chippings (13.2mm Size 0.18cum and 11.2mm size 0.09cum) mixed with
63.20.25 sqm 94.1
14.6kg. of binder [bitumen VG - 10 (80/100 penetration)] per10sqm of road
surface and rolling complete with power roller exceeding 8 tonne.,
2.5cm consolidated thick single coat premix carpet surfacing with 0.30cum of
stone chippings 11.2mm Size 0.18cum mixed with 19.2kg bitumen VG - 10
63.20.26 sqm 106.91
(80/100 penetration) per 10sqm of road surface and rolling complete with
power roller exceeding 8 tonne.,
Pre-mixed seal coat (type B) with 0.06cum of stone chippings, passing 2.36mm
63.20.28 size and retained on 180 micron IS sieve and 6.8kg. of bitumen VG - 10 (80/100 sqm 38.89
penetration) per 10 sqm of road surface.,
Providing and filling in foundation trenches and at the back of abutments, wing
63.20.29 walls etc. and below pipe bed in layers not exceeding 15cm thick including
watering and compacting including all lead and lifts.,
63.20.29.2 (b) Selected granular material in filling. cum 584.6, cum 605.69
Providing and laying reinforced cement concrete pipes N.P.2 for culverts
63.20.33
including pointing ends, and fixing collar with cement martar 1:2 complete.,
63.20.33.1 (a) 300 mm dia, metre 432.08
63.20.33.2 (b) 450mm dia, metre 782.02
63.20.33.3 (c) 600mm dia, metre 879.38
Laying reinforced cement concrete pipes N.P.2 for culverts including pointing
63.20.34
ends, and fixing collar with cement martar 1:2 complete.,
63.20.34.1 (a) 300mm dia, metre 49.05
63.20.34.2 (b) 450mm dia, metre 65.79
63.20.34.3 (c) 600mm dia, metre 89.6

Page 16 of 39
Item No Specification Unit Rate
Providing and laying reinforced cement concrete pipes N.P.3 for culverts
63.20.35
including pointing ends, and fixing collar with cement martar 1:2 complete.,
63.20.35.1 (a) 900 mm dia., metre 3170.6
63.20.35.2 (b) 1000 mm dia., metre 3747.13
63.20.35.3 (c) 1200 mm dia., metre 4501.66
63.20.35.4 (d) 600 mm dia., metre 1663.37
Laying reinforced cement concrete pipes N.P.3 for culverts including pointing
63.20.36
ends, and fixing collar with cement martar 1:2 complete.,
63.20.36.1 (a) 900 mm dia., metre 237.15
63.20.36.2 (b) 1000 mm dia., metre 255.15
63.20.36.3 (c) 1200 mm dia., metre 282.43
63.20.36.4 (d) 600 mm dia., metre 191.45

"Cement Concrete Pavement Construction of un-reinforced, dowel jointed at


expansion and contraction joint only, plain cement concrete pavement,
thickness as per design, over a prepared sub base, with 43 grade cement or any
other type as per clause 1501-2-2 M30 (Grade), coarse and fine aggregates
conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm,
dowel bars 25 mm dia and 500 mm long @ 25 cm c/c or as per design, mixed in
a concrete mixer of not less than 0.2 cum capacity and appropriate weigh
batcher using approved mix design, laid in approved fixed side formwork (steel
63.20.38 channel), laying and fixing of 125 micron thick polythene film, wedges, steel
plates including levelling the formwork as per drawing), spreading the concrete
with shovels, rakes, compacted using needle, screed, and plate vibrators and
finished in continuous operation including provision of contraction and
expansion, construction joints, applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge/culvert and construction joints,
admixtures as approved, curing of concrete slabs for 14 days,using curing
compound (where specified) and water finishing to lines and grade as per
drawing and Technical Specification Clause 1501.",

63.20.38.1 (a) M 30 Cement Concrete for rigid pavement, cum 4060.59


(b) Providing and fixing of 500mm long 25 mm dia bars in expansion joints
63.20.38.2 cum 76.94
complete.,
63.20.38.3 (c) Providing and laying of polythelen sheet of 125micron thick, cum 4.09
(d) Providing laying making filling and sealing of expansion and contraction
63.20.38.4 cum 14.63
joints complete.,
Construction of granular sub-base (GSB) by naturally occurred material or river
born material or by crushed metal or mixture of two or more, to bring the
material in appropriate grading mentioned in table 400.1, (I, II or III) of
specifications for rural roads(MORD), having minimum soacked CBR value of 20,
Liquid Limit and Plasticity Index should not be more then 25 and 6 respectively,
63.20.39 mixing by mix in place method by rotavator, spreading in 4% camber and
required gradient with tractor mounted grader or labourers on prepared
surface, watering at OMC and compacting with 80 to 100 kN static weight
rollers to achieve desired density minimum 100% of the MDD as per IS:2720
(Part-7). Complete work as per specifications for rural roads (MORD) clause 401,
i/c all leads and lifts of materials etc. complete.,

Page 17 of 39
Item No Specification Unit Rate
63.20.39.1 (a) For minimun soacked CBR Value of 20, cum 399.41
63.20.39.2 (b) For minimum soacked CBR value of 30, cum 474.16
Compaction of embankment with approved materials as per clause 301.4 &
301.5 of specifications for rural roads(MORD), already spreaded at site,
obtained from roadway cutting, excavated from drains, foundation of other
63.20.41 structures or from borrow pit, making 4% camber and required Grade by tractor cum 30.05
mounted grader or labourers, watering at OMC and compacted by 80 to 100 kN
static weight rollers to achieve desired density minimum 97% as per table 300.1
and 300.2 of (MORD) - i/c required leads and lifts of materials etc. complete.,

Compaction of soil for construction of subgrade & earthen shoulders with


approved material, already spreaded at site, obtained from roadway cutting,
drains, foundation of other structures or barrow pits, i/c making 4% camber and
required grade by tractor mounted grader or labourers, watering at OMC and
63.20.42 cum 31.73
compacted by 80 to 100 kN static weight rollers to achieve desired density
minimum 100% of the MDD as per IS:2720 (Part-7). Complet compaction work
as per specifications for rural roads (MORD) clause 303, i/c required leads and
lifts of materials etc. complete.,

Compaction of soil for construction of subgrade & earthen shoulders with


approved transported material collected and stacked at site, i/c spreading,
making 4% camber and required gradient by tractor mounted grader or
63.20.43 labourers, watering at OMC and compacted by 80 to 100 kN static weight rollers cum 36.19
to achieve desired density minimum 100% of the MDD as per IS:2720 (Part-7).
Complete compaction work as per specifications for rural roads (MORD) clause
303, i/c required leads and lifts of materials etc. complete.,

Construction of hard shoulder as per clause 407 of specifications for rural roads
(MORD), with soil having CBR value not less than 12, inclusive of all leads and
lifts, providing 4-5% camber by tractor mounted grader or labourers, watering
63.20.44 cum 291.03
at OMC and compacted by 80 to 100 kN static weight rollers to achieve desired
density minimum 100% of the MDD as per IS:2720 (Part-7), i/c all leads and lifts
of materials etc. complete.,

Compaction of hard shoulder collected at site, i/c making 4-5% camber by


tractor mounted grader or labourers, watering at OMC and compacting with 80
63.20.45 to 100 kN static weight rollers to achieve desired density minimum 100% of the cum 35.12
MDD as per IS:2720 (Part-7), as per clause 407 of specifications for rural
roads(MORD), i/c required leads and lifts of materials etc. complete.,

Page 18 of 39
Item No Specification Unit Rate

Construction of Gravel Base Course as per clause 402 of "Ministry of Rural


Development, Specifications for Rural Roads-August, 2004" by an appropriate
combination of natural gravel, river borne material and crushed metal in
required proportions confirming to Grading requirements specified in clause
2.2.2.2 or clause 2.2.2.3 (Table 2.3, Material having Nominal Maximum Size 80
63.20.48 mm or 40 mm or 20 mm) of IRC:SP:77-2008, having Liquid Limit and Plasticity
Index less than 25 and 10 respectively, including all leads and lifts of material
etc. complete. The mixing shall be by Mix-in-Place method over prepared
surface, spreading in uniform layers with tractor mounted grader or manually,
watering at OMC and compaction by smooth wheeled/vibratory roller of 80 to
100 kN static weight to achieve 100% of MDD as per IS:2720 (Part-7).,

63.20.48.1 (a) Above item having material strength not less than 80% CBR, cum 612.58
547.32
63.20.48.2 (b) Above item having material strength not less than 30%CBR, cum

"Construction of Gravel Surface Course as per clause 402 of "Ministry of Rural


Development, Specifications for Rural Roads-August, 2004" by an appropriate
combination of natural gravel, river borne material and crushed metal in
required proportions confirming to Grading requirements specified in clause
2.2.2.2 or clause 2.2.2.3 (Table 2.3, Material having Nominal Maximum Size 20
mm or 10 mm) of IRC:SP:77-2008, having Liquid Limit less than 40 and Plasticity
63.20.49 cum 467.73
Index 6-15 and strength of material not less than 20% CBR, including all leads
and lifts of material etc. complete. The mixing shall be by Mix-in-Place method
over prepared surface, spreading in uniform layers with tractor mounted grader
or manually, watering at OMC and compaction by smooth wheeled/vibratory
roller of 80 to 100 kN static weight to achieve 100% of MDD as per IS:2720 (Part-
7)".,

Excavation, Carting i/c Removal of Soil with Disposal upto 1000 m Excavation of
embankment, sub-grade and drain consisting of excavation, removal and
satisfactory disposal of all excavated materials including hauling to sides of
embankment and subgrade construction as also the disposal of materials in
63.20.50 cum 50.38
specified manner and the trimming and finishing of the road to the specified
dimensions i/c all lifts, lead upto 1000 meters including dewatering, shaping and
excavation in marsh and complete disposal of all muck as per clause 302. for all
types of soil i/c moorum gravel etc. as directed by the Engineer-in-charge,

Construction of Embankment, subgrade & earthen shoulders with Material


Obtained from Borrow Pits. Construction of embankment, subgrade & earthen
shoulders with approved material (Select soil having CBR 7) obtained from
borrow pits i/c all leads and lift and removal of top soil if any, including cost of
63.20.51 cum 180.43
land as a source of material, transporting to site, spreading, graded by motor
grader to required slope and compacting using vibratory rollers of 80 to 100 kN
static weight to meet requirement of Tables 300.1 and 300.2 including all leads,
etc. as per Technical Specification Clauses 301.4, 301.5, and 303.,

Page 19 of 39
Item No Specification Unit Rate
Construction of embankment, subgrade & earthen shoulders with approved
material obtained from borrow pits i/c all leads and lift and removal of top soil if
any, including cost of land as a source of material, transporting to site,
63.20.52 spreading, graded by motor grader to required slope and compacting using cum 137.79
vibratory rollers of 80 to 100 kN static weight to meet requirement of Tables
300.1 and 300.2 including all leads, as per Technical Specification Clauses 301.4,
301.5, and 303.,
Providing and fixing to wall ceiling and floor galvanised mild steel tubes
63.21.01 (medium grade) of the following nominal bore, tube fittings and clamps
including walling making good the wall, ceiling and floor,
63.21.01.1 (a) 15 mm dia., metre 142.99
63.21.01.2 (b) 20 mm dia., metre 171.12
63.21.01.3 (c) 25 mm dia., metre 211.3
63.21.01.4 (d) 32 mm dia., metre 261.36
63.21.01.5 (e) 40 mm dia., metre 296.51
63.21.01.6 (f) 50 mm dia., metre 379.13
Providing and laying in trenches galvanised mild steel tubes (medium grade) of
63.21.04 the following nominal bore, tube fittings (earth work in trenches to be
measured and paid for separately),
63.21.04.1 (a) 15 mm dia., metre 93.77
63.21.04.2 (b) 20 mm dia., metre 115.36
63.21.04.3 (c) 25 mm dia., metre 151.66
63.21.04.4 (d) 32 mm dia., metre 189.42
63.21.04.5 (e) 40 mm dia., metre 209
63.21.04.6 (f) 50 mm dia., metre 268.7
Laying G.I pipe line, with all materials except pipe, fitting and clamps but
63.21.06
including excavation of trenches and refilling etc. complete (for item 2104),
63.21.06.1 (a) 15 mm to 20 mm dia., metre 7.46
63.21.06.2 (b) 25 mm to 32 mm dia., metre 11.41
63.21.06.3 (c) 40 mm to 50 mm dia., metre 15.13
Providing and fixing to wall, ceiling and floor 6.00kgf/sqcm working pressure
polyethylene pipes of the following outside diameter low density complete with
63.21.07
special flange compression type fitting wall clips etc. including making good the
wall ceiling and floor.,
63.21.07.1 (a) 20 mm dia., metre 55.8
63.21.07.2 (b) 25 mm dia., metre 58.24
63.21.07.3 (c) 32 mm dia., metre 65.51
63.21.07.4 (d) 40 mm dia., metre 79.98
63.21.07.5 (e) 50 mm dia., metre 91.96
Providing and fixing to wall, ceiling and floor 6.00kgf/sqcm working pressure
polyethylene pipes of the following outside diameter high density complete
63.21.08
with special flange compression type fitting wall clips etc. including making good
the wall ceiling and floor.,
63.21.08.1 (a) 32 mm dia., metre 78.11
63.21.08.2 (b) 40 mm dia., metre 89.94
63.21.08.3 (c) 50 mm dia., metre 104.98

Page 20 of 39
Item No Specification Unit Rate
Providing and laying in trenches 6.0kgf/sqcm working pressure polyethylene
pipes of the following outside diameter low density complete with special
63.21.10
flange compression type fitting (earth work in trenches is to be measured and
paid for separately),
63.21.10.1 (a) 20 mm dia., metre 24.22
63.21.10.2 (b) 25 mm dia., metre 26.44
63.21.10.3 (c) 32 mm dia., metre 33.1
63.21.10.4 (d) 40 mm dia., metre 47.1
63.21.10.5 (e) 50 mm dia., metre 58.2
Providing and laying in trenches 6.0kgf/sqcm working pressure polyethylene
pipes of the following outside diameter high density complete with special
63.21.11
flange compression type fitting (earth work in trenches is to be measured and
paid for separately),
63.21.11.1 (a) 32 mm dia., metre 44.66
63.21.11.2 (b) 40 mm dia., metre 56.28
63.21.11.3 (c) 50 mm dia., metre 68.08
Making connection of galvanised mild steel distribution branch with galvanised
63.21.13
mild steel main by providing and fixing tee including cutting the pipes complete.,
63.21.13.1 (a) 25 mm to 40 mm nominal bore., each 283.91
63.21.13.2 (b) 50 mm to 80 mm nominal bore., each 379.47
Fixing water meter and stop cock in galvanised mild steel tube of the following
nominal bore including necessary fittings such as mild steel galvanised jamnut,
63.21.15 each 218.54
socket etc cutting and threading the tube and making long screws complete
(water meter, jam nut and stop cock to be measured and paid for separately),

63.21.26 Providing and fixing ferule of the following nominal bore including boring.,
63.21.26.1 (a) 15mm nominal bore., each 128.5
63.21.26.2 (b) 20mm nominal bore., each 180.32
63.21.26.3 (c) 25mm nominal bore., each 192.67
Providing and Fixing Brass Screw Down Bib Taps polished bright of the following
63.21.28
nominal bore., ,
63.21.28.1 (a) 15mm dia., each 169.14
63.21.28.2 (b) 20mm dia., each 221.67
63.21.28.3 (c) 25mm dia., each 261.6
Providing and Fixing capstan head with porcelain disc marked hot or cold, bib
63.21.29
taps of the following nominal bore.,
63.21.29.1 (a) 15mm dia., each 202.95
63.21.29.2 (b) 20mm dia., each 238.41
283.34
63.21.29.3 (c) 25mm dia., each
Providing and Fixing 15mm dia Chromium plated Bib Taps of the following
63.21.30 each 281.87
nominal bore.,
Providing and fixing 15mm dia pillar taps, capstan head screw down, high
63.21.31 pressure lettered Hot or Cold' with long screws, shanks and bank nuts of the no 338.27
following nominal bore.,
63.21.33 Providing and Fixing Brass Screw Down stop Tap of the following nominal bore.,
63.21.33.1 (a) 15 mm nominal size, no 191.72

Page 21 of 39
Item No Specification Unit Rate
232.84
63.21.33.2 (b) 20 mm nominal size, no
63.21.33.3 (c) 25 mm nominal size, no 348.84
63.21.33.4 (d) 32 mm nominal size, no 486.03
63.21.33.5 (e) 40 mm nominal size, no 810.47
63.21.33.6 (f) 50 mm nominal size, no 1080.69
Providing and Fixing Brass full-way valve of the following nominal bore with
63.21.35
wheel.,
63.21.35.1 (a) 15mm nominal bore, no 281.87
380.16
63.21.35.2 (b) 20mm nominal bore, no
63.21.35.3 (c) 25mm nominal bore, no 554.42
63.21.35.4 (d) 32mm nominal bore, no 725.84
63.21.35.5 (e) 40mm nominal bore, no 901.59
63.21.35.6 (f) 50mm nominal bore, no 1079.35
Providing and fixing gun metal check or non-return valve, class-I, of the
63.21.37
following nominal bore.,
473.83
63.21.37.1 (a) 25 mm nominal bore each
63.21.37.2 (b) 32mm nominal bore, each 596.9
63.21.37.3 (c) 40mm nominal bore, each 749.18
63.21.37.4 (d) 50mm nominal bore, each 872.57
63.21.39 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.,
63.21.39.1 (a) 100 mm dia., each 94.76
63.21.39.2 (b) 150 mm dia., each 129.22
Providing and fixing in position best Indian make G.I. Elbows in G.I. Pipe
63.21.41 including cutting and threading the pipe and making long screws etc. complete
(New work),
63.21.41.1 (a) 15 mm dia., each 26.84
63.21.41.2 (b) 20 mm dia., each 28.96
63.21.41.3 (c) 25 mm dia., each 36.36
63.21.41.4 (d) 32 mm dia., each 57.81
63.21.41.5 (e) 40 mm dia., each 72.62
63.21.41.6 (f) 50 mm dia., each 93.77
Providing and fixing in position best Indian make G.I. Tees (equal) in G.I. Pipe
63.21.43 including cutting and threading the pipe and making long screws etc. complete
(New work),
63.21.43.1 (a) 15 mm dia., each 38.78
63.21.43.2 (b) 20 mm dia., each 47.24
63.21.43.3 (c) 25 mm dia., each 55.7
63.21.43.4 (d) 32 mm dia., each 87.69
63.21.43.5 (e) 40 mm dia., each 98.27
63.21.43.6 (f) 50 mm dia., each 130.01
Providing and fixing in position best Indian make G.I. Bend in G.I. Pipe including
63.21.45 cutting and threading the pipe and making long screws etc. complete (New
work),
31.23
63.21.45.1 (a) 15 mm dia, each
63.21.45.2 (b) 20 mm dia., each 41.81

Page 22 of 39
Item No Specification Unit Rate
55.56
63.21.45.3 (c) 25 mm dia., each
63.21.45.4 (d) 32 mm dia., each 83.34
63.21.45.5 (e) 40 mm dia., each 104.48
125.42
63.21.45.6 (f) 50 mm dia., each
Providing and fixing in position best Indian make G.I. Union in G.I. Pipe including
63.36
63.21.47 cutting and threading the pipe and making long screws etc. complete (New each
work),
63.21.47.2 (b) 20 mm dia., each 77.12
63.21.47.3 (c) 25 mm dia., each 92.98
63.21.47.4 (d) 32 mm dia., each 115.47
63.21.47.5 (e) 40 mm dia., each 136.64
63.21.47.6 (f) 50 mm dia., each 178.95
Providing and placing on terrace (at all floor levels) polyethylene water storage
tank ISI : 12701 marked with cover and suitable locking arrangement and
63.21.49 Litre 6.25
making necessary holes for inlet, outlet and overflow pipes but without fittings
and the base support for tank.,
Providing and fixing water closet squatting pan (Indian type W.G. pan) size
63.22.01 580mm (earth work bed concrete, foot rests and trap to be measured and paid
for separately),
855.11
63.22.01.1 (a) Vitreous China Long pattern- white colour, each
63.22.01.2 (b) Vitreous China Orissa pattern - white colour, each 1015.66
63.22.01.3 (c) Vitreous China Orissa pattern- standard colour, each 1069.37
63.22.01.4 (d) Glazed earthenware Long pattern, each 1015.79
63.22.01.5 (e) Glazed earthenware Orissa pattern, each 876.53
Providing and fixing wash down water closet squatting pan (European type W.C.
pan) with integral P or 'S' trap including jointing the trap with soil pipe in cement
63.22.02
mortar 1:1 (1cement, 1fine sand) - (seat and cover to be measured and paid for
separately),
63.22.02.1 (a) Vitreous China -Pattern 1 in white colour, each 1363.97
63.22.02.2 (b) Vitreous China -Pattern 1 in standard colour., each 1444.32
1337.19
63.22.02.3 (c) Vitreous China -Pattern 2 in white colour., each
63.22.02.4 (d) Vitreous China -Pattern 2 in standard colour., each 1637.16
63.22.02.5 (e) Glazed Earthenware-Pattern 1, each 1230.06
63.22.02.6 (f) Glazed Earthenware-Pattern 2, each 1283.63
1337.19
63.22.02.7 (g) Glazed Earthenware-Pattern 3, each
Providing and fixing 100mm size P or S' trap for water closet squatting pan
63.22.04 including jointing the trap with pan and soil pipe in cement mortar 1:1
(1cement, 1fine sand),
63.22.04.1 (a) Vitreous china, each 361.75
63.22.04.2 (b) Glazed earthenware., each 340.49
398.78
63.22.04.3 (c) Sand Cast Iron., each
Providing and fixing in cement mortar 1:3 (1cement, 3 coarse sand) a pair of
63.22.06 white vitreous China 250mm X 130mm X 30mm foot rest for long pattern each 205.36
squatting pan water closet.,

Page 23 of 39
Item No Specification Unit Rate
Providing and fixing in position with clamps, etc. 32mm nominal internal
diameter galvanised steel tube flush pipe for high level flushing cistern including
63.22.09 metre 169.06
connecting the flush pipe with cistern and closet and making good the walls and
floors.,
Providing and fixing bowl pattern urinal including connecting the urinal with
63.22.11 waste pipe by means of white lead mixed with chopped hemp (waste pipe to each 723.57
measured and paid for separately),
(b) Vitreous China flat back type of size 430 mm x 260 x mm x 350 mm in
63.22.11.2 each 723.57
Standard colours except misty-lilac.,
(c) Vitreous China angle back type of size 340 mm x 430 mm x 265 mm in white
63.22.11.3 each 680.72
colour,
(d) Vitreous China angle back type of size 340 mm x 430 mm x 265 mm in 627.17
63.22.11.4 each
standard colour except Misty-Lilac,
63.22.11.5 (e) Glazed Earthenware flat back type of size 430 mm x 260 x mm x 350 mm, each 627.17

63.22.11.6 (f) Glazed Earthenware angle back type of size 340 mm x 430 mm x 265 mm, each 520.03
Providing and fixing squatting plate pattern urinal of size 600mm X 350mm with
63.22.13
integral longitudinal flush pipe.,
63.22.13.1 (a) Vitreous china, each 1233.07
63.22.13.2 (b) Glazed Earthenware., each 1127.29
Providing and fixing C.P. brass flush pipe/spreaders for urinal of the following
63.22.17 nominal box with fittings such as unions, clamps etc (all in D.P. brass) including
cutting holes and making good the same.,
135.42
63.22.17.1 (a) 15 mm, metre
63.22.17.2 (b) 20 mm, metre 156.64
63.22.17.3 (c) 25 mm, metre 174.68
189.74
63.22.17.4 (d) 32 mm, metre
Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S.
63.22.19 brackets painted white including cutting holes and making good the same but
excluding fitting.,
63.22.19.1 (a) Vitreous China flat back wash basin 630 mm x 450 mm size in white colour, each 2054.53
(b) Vitreous China flat back wash basin 630 mm x 450 mm size in standard
63.22.19.2 each 2161.6
colour except Misty-Lilac
63.22.19.3 (c) Vitreous China Flat back wash basin 550 mm x400 mm size in white colour each 1572.4
(d) Vitreous China Flat back wash basin 550 mm x 400 mm size in standard
63.22.19.4 each 1625.96
colour except Misty-Lilac
63.22.19.5 (e) Vitreous China Angle back wash basin 600 mm x 480 mm white colour each 1625.96

63.22.19.6 (f) Vitreous China Angle back wash basin 400 mm x 400 mm white colour each 1251.01

63.22.19.7 (g) Glazed earthenware flat back wash basin 630 mm x 450 mm size white colour each 1840.22

63.22.19.8 (h) Glazed earthenware flat back wash basin 550 mm x 400 mm size white colour each 1304.56

Page 24 of 39
Item No Specification Unit Rate
63.22.19.9 (i) Glazed earthenware Angle back wash basin 600 x 480 mm size white colour each 1518.83

63.22.19.10 (g) Glazed earthenware Angle back wash basin 400 x 400 mm size white colour each 1197.43
63.22.25 Providing and fixing C.P. brass waste for wash basin or sink .
63.22.25.1 (a) 32 mm dia each 133.3
63.22.25.2 (b) 40 mm dia each 146.87
63.22.26 Providing and fixing M.I. fisher union for wash basin or sink .
63.22.26.1 (a) 32 mm dia each 82.83
63.22.26.2 (b) 40 mm dia, , each 99.75
63.22.27 Providing and fixing C.P. brass or M.I. Trap for wash basin and sink.,
99.82
63.22.27.1 (a) 32 mm dia, each
115.00
63.22.27.2 (b) 40 mm dia, each
Providing and fixing plastic seat and cover for wash down water closet with C.P.
63.22.28
brass hinges and rubber buffers.,
63.22.28.1 (a) White plastic seat and cover, each 358.63
63.22.28.2 (b) Black plastic seat and cover, each 332.19
Providing and fixing C.P. brass waste of following nominal bore and plug for
63.22.30 flazed ware sinks, basins etc. with long screwed shanks and fly nuts and fixed to
steel pipe including vulcanite plug, brass chain and stud.,
63.22.30.1 (a) 32 mm dia, each 165.45
63.22.30.2 (b) 40 mm dia, each 206.58
63.22.30.3 (c) 50 mm dia, each 216.87
Providing and fixing on Wall face Asbestos Cement building pipe of the following
63.22.32 nominal size including jointing with sun yarn soaked in bitumen and cement
mortar 1:2 (1cement, 2sand) complete .,
63.22.32.1 (a) 50 mm dia., metre 112.46
63.22.32.2 (b) 80 mm dia., metre 127.9
155.50
63.22.32.3 (c) 100 mm dia., metre
Providing and fixing asbestos cement fitting. Plain Bend of the following nominal
63.22.34 size including jointing with spun yarn soaked in bitumen and cement mortar 1:2
complete.,
63.22.34.1 (a) Plain bend.50 mm dia, each 96.16
63.22.34.2 (b) Plain bend.80 mm dia., each 101.52
Providing and fixing in position A.C. cowls of the following nominal size including
63.22.36
jointing with spun yarn soaked in bitumen and cement mortar 1:2 complete.,
63.22.36.1 (a) Cone cap cowl 50 mm dia., each 96.16
63.22.36.2 (b) Cone cap cowl 80 mm dia., each 106.88
63.22.36.3 (c) Cone cap cowl 100 mm dia., each 122.95
112.24
63.22.36.4 (d) Slotted vend cowl 50 mm dia., each
63.22.36.5 (e) Slotted vend cowl 80 mm dia., each 117.6
63.22.36.6 (f) Slotted vend cowl 100 mm dia., each 117.6

Page 25 of 39
Item No Specification Unit Rate
FOR EARTHEN DAM - Providing fitter blanket, horizontally, including laying,
63.23.08 Spreading, packing etc. in layers of required thickness but excluding excavation
of foundation.,
63.23.08.3 (c) Metal 40 mm nominal size, cum 816.99
63.23.08.4 (d) Metal 20 mm nominal size, cum 1124.84
63.23.08.5 (e) Metal 10 mm nominal size, cum 935.64
FOR EARTHEN DAM - Construction of rock toe in earthen embankments
63.23.10 including laying and hand packing, dressing, wedging and finishing over surface
with.,
63.23.10.1 (a) Boulders, cum 541.79
612.98
63.23.10.2 (b) Quarried other then black trap, basalt or granite, cum
63.23.10.3 (c) Black trap, basalt or granite, cum 636.71
For earthen dam - puddle filling of good clay including lead upto 20 meter
63.23.25 cum 390.72
including mixing, watering & kneading by tamping , ramming & laying etc.,

For earthen dam - puddle filling of good clay ( excluding cost of puddle earth &
63.23.26 cum 223.74
Water) including mixing, kneading by tamping , ramming & laying etc.,
For earthen dam - deduct from item no 63.23.25 in case water is available at 61.52
63.23.27 cum
site.,
For Earthen Dam : Excavation of puddle trench/ cut of trench for earthen
63.23.28 embankment to proper side slopes and bed grade including shoring wherever
necessary dressing 20m lead for,
63.23.28.1 (a) Loose or soft soil for Tank Work, lift of up to 3m depth, cum 81.49
146.52
63.23.28.3 (c) Hard moorum for Tank Work, lift of up to 3m depth, cum
63.23.28.4 (d) Loose or soft soil for Tank Work, Over 3m up to 6m depth, cum 97.79
63.23.28.5 (e) Dense or hard soil for Tank Work, Over 3m up to 6m depth, cum 132
63.23.28.6 (f) Hard moorum for Tank Work, Over 3m up to 6m depth, cum 175.82
For Earthen Dam : Providing filter blanket including laying spreading, packing
63.23.29 etc. in layer of required thickness but excluding excavation of foundation for cum 327.28
gravel,
Earth work for well excavation including disposal of excavated soil lead upto
63.24.1
20m and lift upto 1.5m, disposed soil to be levelled and neatly dressed.,
63.24.01.1 (a) Loose or soft soil, cum 104.21
63.24.01.2 (b) Dense or hard soil, cum 137.82
63.24.01.3 (c) Hard Moorum, cum 179.41
Earth work for well excavation including disposal or stacking of excavated soil
63.24.02
lead upto 20m lift upto 1.5m,
63.24.02.1 (a) Disintegrated or soft rock (not requiring blasting), cum 445.06
63.24.02.2 (b) Hard rock requiring blasting., cum 664.56
63.24.02.3 (c) Hard rock requiring chiselling (where blasting is prohibited), cum 1011.52

Page 26 of 39
Item No Specification Unit Rate
Providing and fixing G.I. chain link fabric fencing of required width in mesh size
25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia.
wire or nuts, bolts and washers as required complete with posts of specified
material and of standard design placed and embedded in cement concrete
63.25.51 blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate sqm 524.72
40mm nominal size) every 15th post, last but one end post and corner post shall
be strutted on both sides and end post on one side only and struts embedded in
cement concrete blocks 70x45x50cm of the same mix, as per the direction of
Engineer in charge.,
Providing and fixing on wall face unplasticised Rigid PVC Rain water pipes
conforming to IS : 13592 Type A including jointing with seal ring conforming to
63.25.64.2 metre 228.04
IS : 5382 leaving 10 mm gap for thermal expansion. (ii) 110 mm diameter
(minimum wall thickness 2.2mm)
Providing and laying below ground unplasticised PVC pipe to with stand working
pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985
63.25.106 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for
thermal expansion all necessary fittings etc. complete. Excavation to be paid
seperately,
63.25.106.1 (a) 110 mm diameter OD RM 210.60, metre 221.15
63.25.106.2 (b) 160 mm diameter OD RM 429.30, metre 457.35
63.25.106.3 (c) 200 mm diameter OD RM 675.90, metre 723.25
63.25.106.4 (d) 250 mm diameter OD RM 874.80, metre 938.9
1193.37
63.25.106.5 (e) 300 mm diameter OD RM 1108.80, metre
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone
63.25.107 aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as
per standard design,
63.25.107.1 (a) 110 mm diameter PVC. Pipe, metre 610.14
63.25.107.2 (b) 160 mm diameter PVC. Pipe, metre 858.31
63.25.107.3 (c ) 200 mm diameter PVC. Pipe, metre 1114.63
63.25.107.4 (d) 250 mm diameter PVC. Pipe, metre 1456.93
Setting out work (Reference pillars, referencing bench mark and temporary
bench mark):- Construction of Reference Bench Mark 50x50x70 cm. made of
1:3:6 cement concrete i/c excavation of 50x50x50 cm pit, working benchmark
30x30x45 cm at every 500 m interval made of 1:3:6 cement concrete i/c
excavation of 30x30x30 cm pit and providing and fixing of Reference pillars
made of cast in situ or pre cast RCC pole,1.50m long having dimensions
63.25.153 km 6743.59
as100x100mm at top and 150x150mm at bottom with 4 no. 8mm dia. bars in
longitudinal direction and 6mm dia. stirrups at 300mm c/c spacing - made in
cement concrete M-15, or finished stone posts 1500 x200x75 mm size
embedded in 30x30x45 cm cement concrete 1:3:6 i/c excavation and casting
etc. complete, @ 100 m interval or as required on both sides of the formation
width preferably at 5.50 m distance from centre line.,
Providing and fixing 3 Hp diesel pump including fitting of suction pipe with foot
63.25.194
valve.,

Page 27 of 39
Item No Specification Unit Rate
Survey and investigation and preparation of DPR for road work with chain and
compass, auto level, theodolite or total station i/c fixing of permanent
benchmark and also fixing of bench mark on all the permanent structures, along
the alignment, like boundary wall,electrical poles etc. Also marking of locations
of boundary wall,electric poles, telephone poles trees etc. in the road boundary,
63.25.154 collection and submission of existing inventory of the road all along the km 651.42
alignment conducting survey@20 metre interval for L-section and for single lane
X-section interval will be @ 0.75, 1.25, 1.875, 2.60, 3.75, 4.50, 5.50 and 6.50
metre on both side of centre line for two lane four lane interval for x-section
shall be as specified in MORT&H/MoRD Specifications. (FOR LABOUR ONLY IN
SURVEYING ),

63.25.156 Cautionary, mandatory, informatory, direction and place identification signs,

(i) Semi-Reflective Traffic signs more than 0.90 sqm size board Providing and
erecting cautionary, mandatory, informatory, direction and place identification
of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly
stove enameled paint white colour in front and grey colour on back with
reflective border of 70 mm width and required message, letters, figures with
reflective tape of engineering grade as per MORD specifications of required
63.25.156.1 sqm 5321.16
shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12
SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS
flat iron on edges on back firmly fixed to the ground by means of properly
designed foundations with M-15 grade cement concrete 450 mm x 450 mm x
600 mm, 600 mm below ground level as per approved drawing and Technical
Specification Clause 1701,

(ii) Semi-Reflective Traffic signs up to 0.90 sqm size board Providing and erecting
cautionary, mandatory, informatory, direction and place identification of semi
reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove
enameled paint white colour in front and grey colour on back with reflective
border of 70 mm width and required message, letters, figures with reflective
63.25.156.2 tape of engineering grade as per MORD specifications of required shade and
colour. Supported and welded on 47 mm x 47 mm of 12 SWG square tube of
3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on
back firmly fixed to the ground by means of properly designed foundations with
M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below
ground level as per approved drawing and Technical Specification Clause 1701,

63.25.156.2.1 (A) 900 mm equilateral triangle, each 3217.25


63.25.156.2.2 (B) 600 mm Circular, each 3055.48
63.25.156.2.3 (C) 800 mm x 600 mm rectangular, each 3531.03
63.25.156.2.4 (D) 600 mm x 450 mm rectangular, each 3024.05
63.25.156.2.5 (E) 600 mm equilateral triangle, each 2748.83
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local
63.25.158 stone of standard design as per IRC:8 fixing in position including painting and
printing, etc as per drawing and Technical Specification Clause 1703,

Page 28 of 39
Item No Specification Unit Rate
63.25.158.1 (A) With Reinforced cement concrete (ii) Ordinary Kilometer Stone (Pre cast), no 1579.55
63.25.158.2 (A) With Reinforced cement concrete (iii) 200 m stone (precast), no 479.17
Guard stones Providing and fixing guard stones on curves or at any other place
as directed by engineer in charge made of 220 X220X1000 mm hammer dressed
63.25.162 stones and fixed 400mm into the ground in moorum and broken aggregates each 429.38
block of size 500X500X500mm and painted with white and black bands in 2 coat
including excavation of pit etc. complete.,

Providing and laying bouler apron for bed protection with stone boulders of
63.25.177 minimum size and weight as per table 1300.1, no fragment weighing less than cum 681.89
25 kg, laid dry complete as per drawing and technical specification clause 1301,
Providing and laying pitching on slopes laid over prepared filter media as per
63.25.178 cum 777.81
drawing and technical specifications clause 1302,
Granular subbase with well graded material (CBR 20 or more) (Table 400.1)
Construction of granular sub base by providing well graded material having CBR
20 or more spreading in uniform layers with motor grader on prepared surface,
63.25.192 mixing by mix in place method with rotavator at OMC, & compacting with
vibratory rollers of 80 to 100 kN static weight to achieve the desire density,
complete as per technical specification clause 401 for gradings mentioned in
table 400.1,
63.25.192.1 (A) For Grading I,II,III material crushed stone material, cum 962.88
63.25.193 Water Bound Macadam Sub-base/base with stone screening,
WBM Grading 2 Providing, laying, spreading and compacting stone aggregates
of specific size to water bound macadam specification including spreading in
uniform thickness, handpacking, rolling with smooth wheel roller 80-100kN in
63.25.193.1 stages to proper grade and camber, applying and brooming, stone cum 1524.97
screening/binding material to fill up the interstices of coarse aggregate,
watering and compacting to the required density grading 2 as technical
specification 405,
WBM Grading 3 Providing, laying, spreading and compacting stone aggregates
of specific size to water bound macadam specification including spreading in
uniform thickness, handpacking, rolling with smooth wheel roller 80-100kN in
63.25.193.2 stages to proper grade and camber, applying and brooming, stone cum 1590.26
screening/binding material to fill up the interstices of coarse aggregate,
watering and compacting to the required density grading 3 as technical
specification 405,
Providing and fixing 3 Hp diesel pump including fitting of suction pipe with foot
63.25.194 each 33764.36
valve.,
Providing and fixing Electric submersible pump - 3HP , 4 stage , 1 phase, 50 mm
63.25.195 each 24719.1
delivery ISI mark .,
Providing and fixing Electric submersible pump - 3HP , 4 stage , 3 phase, 50 mm
63.25.196 each 22719.1
delivery ISI mark.,
Providing and fixing Electric Open Well submersible pump - 3HP , 3 phase, 50
63.25.197 each 17519.1
mm delivery ISI mark .,
Providing and fixing Electric Open Well submersible pump - 3HP , 1 phase, 50
63.25.198 each 17319.1
mm delivery ISI mark,

Page 29 of 39
Item No Specification Unit Rate
Providing and fixing Electric Mono pump set - 3HP , 3 phase, 65mm suction, 50 17719.10
63.25.199 each
mm delivery ISI mark,
Providing and fixing Electric Mono pump set - 3HP , 1 phase, 65mm suction, 50
63.25.200 each 18719.1
mm delivery ISI mark,
Construction of boulder/stone wall, boulder check etc. as per drawing and
63.25.201 specifications in mud mortar or dry, one side of the wall guard walls, temporary cum 705.45
diversion etc. including all materials, labour complete,

Providing and construction for retaining earth etc. with segments of wire crates
of size 7mx3mx0.6m each divided into 1.5m compartments by cross netting,
made from 4mm galvanised steel wire@32kg per 10 sqm having minimum
63.25.202 tensile strength of 300 Mpa conforming to IS:280 and galvanizing coating cum 799.64
conforming to IS:4826, woven into mesh with double twist, mesh size not
exceeding 100x100mm, filled with boulders with least dimension of 200mm, all
loose ends to be tied with 4mm galvanised steel wire,
63.26.29 Compaction of earth work for Earthen Tanks,
Hearting, casing/cut off filling soil etc. At optimum moisture content to achieve
63.26.29.1 maximum dry density by mechanical sheep foot roller/ vibratory compacters cum 21.56
including watering, required leads and lifts and material etc. complete.,

Stripping the seat of embankment of all foreign materials, vegetation and other
63.26.46 growth like grass grass roots etc. and removing and rubbish up to a suitable cum 136.63
distance including dressing but excluding jungle clearance etc. complete.,
Benching the seat of embankment to an average depth of 15cm and cross slope
of 1 in 12 including cleaning of all foreign material, vegetation and other growth
63.26.47 cum 149.16
like grass and plant roots and removing the rubbish up to a suitable distance
and dressing etc. complete.,
63.27.01 Site clearance, cutting grass, raking into heaps and removing off the premises, sqm 2.43

Earth work in bulk excavation (exceeding 30cm in depth, 1.5m in width as well
63.27.02 as 10sqm on plan) including disposal of excavated soil lead upto 20m and lift
upto 1.5m, disposed soil to be levelled and neatly dressed.,
63.27.02.1 a (i) Loose or soft soil for Road Work, cum 92.08
63.27.02.2 a (ii) Loose or soft soil for Well Work, cum 124.3
63.27.02.3 a (iii) Loose or soft soil for Tank Work, cum 92.08
63.27.02.4 b (i) Dense or hard soil for Road Work, cum 124.3
63.27.02.5 b (ii) Dense or hard soil for Well Work, cum 183.37
63.27.02.6 b (iii) Dense or hard soil for Tank Work, cum 124.3
63.27.02.7 c (i) Hard moorum for Road Work, cum 165.47
63.27.02.8 c (ii) Hard moorum for Well Work, cum 199.58
63.27.02.9 c (iii) Hard moorum for Tank Work, cum 165.57
Earth work in bulk excavation (exceeding 30cm in depth, 1.5m in width as well
63.27.03 as 10sqm on plan) including disposal or stacking of excavated soil lead upto 20m
lift upto 1.5m, disposed soil to be levelled and neatly dressed.,
63.27.03.1 a (i) Disintegrated or soft rock (not requiring blasting) for Tank Work, cum 527.65
63.27.03.2 a (ii) Disintegrated or soft rock (not requiring blasting) for Well Work, cum 527.65

Page 30 of 39
Item No Specification Unit Rate
63.27.03.3 b (i) Hard rock requiring blasting for Tank Work, cum 553.75
Earth work in excavation in trenches for foundations and for pipes, cables etc.
not exceeding 1.5m in width and for shafts, cesspits and the like not exceeding
63.27.04 10sqm on plan including dressing of sides and ramming of bottoms lift upto
1.5m including getting out the excavated soil and disposal of surplus excavated
soil as directed, within a lead of 20m,
63.27.04.1 (a) Dense or hard soil (PT/60/60), cum 147.97
63.27.04.2 (b) Dense or hard soil (PT/45/45), cum 154.15
63.27.04.3 (c) Dense or hard soil (PT/30/30), cum 183.25
63.27.04.4 b-(i) Hard moorum (CP/3/0.45), cum 144.93
Excavating post holes (or similar holes) upto 0.5cum including getting out the
excavated soil, than returning the soil as required in layers not exceeding 20cm
63.27.05 in depth, including consolidating each deposited layer by ramming, watering
etc., disposing of surplus excavated soil as directed within a lead of 20m and
making good the surface.,
63.27.05.1 (a) Loose or soft soil no 77.78
63.27.05.2 (b) Dense or hard soil cum 125.82
Earth work in rough excavation, filling excavated earth into depressions on
63.27.06
banking as directed, top surface to be levelled and neatly dressed.,
63.27.06.1 (a) Loose or soft soil cum 98.84
63.27.06.2 (a) Dense or hard soil cum 133.25
149.76
63.27.06.3 (c) Hard moorum cum

Earth work in excavation in trenches for foundations and for pipes, cables etc.
not exceeding 1.5m in width and for shafts, cesspits and the like not exceeding
63.27.07 10sqm on plan including dressing of sides and ramming of bottoms lift upto
1.5m including getting out the excavated soil and disposal of surplus excavated
soil as directed, within a lead of 20m,
63.27.07.1 (a) Loose or soft soil cum 82.81
63.27.07.2 (b) Dense or hard soil, cum 135.27
63.27.07.3 (c) Hard moorum, cum 161
Surface dressing of ground, including removing vegetation, and/ or unequalities
63.27.09 not exceeding 15cm deep and disposal of rubbish lead upto 20m And lift
upto1.5m,
63.27.09.1 (a) Loose or soft soil, sqm 7.2
63.27.09.2 (b) Dense or hard soil, sqm 10.62
63.27.10 Collection of puddle earth including stacking at quarry, cum 167.85
Collection of approved soil having CBR not less then 5, including stacking at
63.27.11 cum 167.85
quarry.,
Collection of approved soil having CBR not less then 12, including stacking at
63.27.12 cum 192.91
quarry.,
Preparation of sub grade by excavating earth work to the 15cm average depth,
63.27.13 dressing to camber including making good the undulations etc. and disposal of
surplus earth with lead upto 20metres and upto 1.5metre.,
63.27.13.1 (a) Loose or soft soil, sqm 14.61
63.27.13.2 (b) Dence or hard soil, sqm 19.64

Page 31 of 39
Item No Specification Unit Rate
Collection of hard metal other then black trap basalt and granite for road works
63.27.14
(without blasting) including stacking as per MOST 1995, clause 400.2.5,
63.27.14.1 (a) Grading - 2 (Size ranging from 63 mm to 45 mm), cum 558.86
63.27.14.2 (b) Grading - 3 (Size ranging from 53 mm to 22.4 mm), cum 676.19
Collection of boulders at source (maximum size 0.014cum) without quarrying
63.27.15 cum 149.16
i.e. picked up boulders.,
63.27.16 Collection of quarried stone or rubble. Maximum size 0.014 cum., cum 268.49
Collection of size stone for coursed rubble masonry rectangular in shape
63.27.17
(maximum size 0.014cum to 0.06cum) including 20%headers.,
679.54
63.27.17.1 (a) Other then black trap Basalt or granite, cum
63.27.17.2 (b) Black trap Basalt or granite, cum 806.36
Collection of sand including screening, washing, stacking and all leads and lifts
63.27.18 cum 208.03
up to the loading point.,
63.27.19 Korebandi for consolidation work. 30 cm wide and 10 cm thick ., metre 3.5
22cm thick dry stone pitching ( without quarry spalls ) with individual stone of
63.27.20 sqm 336.31
22 cm depth and minimum size 0.014 cum,
Collection/Excavation of Graval Material meeting the requirements of Hard
63.27.24 Moorum as detailed in RES SOR chaper 03 Notes Clause 3.2© including stacking cum 192.91
and all leads and lifts up to loading point at quarry.,
Collection of River Borne Material (RBM) (any mixture of sand and graval ) i/c
63.27.25 cum 169.05
boxing and all leads and lifts up to loading point at quarry.,
63.27.26 Stacking of Gravel or Hard Moorum at site without Boxing., cum 20.12
Spreading of material, mixing by mix in place method by manual means or by
Tractor mount disk herrows to meet the requirements of Grading and Plasticity
63.27.27 cum 120.33
given in clause 2.2.2.2, 2.2.2.3, 2.2.3.1 and 2.2.3.2 of IRC:SP:77-2008. and
grading by tractor mount grader to get the required profile.,
63.27.28
63.27.29
Loosing of hard soIl such as moorum etc. By ploughing (tractor ect.) the existing
63.27.30.1 ground exceeding 30cm in depth as well as 10 sqm on plan including all running cum 3.61
expanses of machine.,
Spreading dressing, breaking of clods of ploughed earth upto 20m lead and lift
63.27.30.2 cum 68.24
upto 1.5m disposed soil to be leveled and neatly dressed.,
63.27.33 Citizen Information Board of size 0.6 meter x 0.9 meter ( Individual works ), each 2218.02

63.27.34 Citizen Information Board Size 0.9 Meter x 1.2 Meter ( Community Works ), each 3530.01
Filling dug pits with manure/compost for dug-pit size 0.60x0.60x0.60 m (using
63.28.01 each 11.35
Manure and Excavated earth for filling),
Planting (including cutting and removal of polythene bags) pre- selected species
63.28.02 of plants at pre-prepared pit and watering. Forestry Plants for community
plantation,
63.28.02.1 (I) Pit Size : 0.60 x 0.60 x 0.60 m, height less than 1.5 feet, each 15.28
63.28.02.2 (II) Pit Size : 0.60 x 0.60 x 0.60 m, height 1.5 to 3 feet), each 17.54
63.28.02.3 (III) Pit Size : 0.60 x 0.60 x 0.60 m, height 3 to 5 feet, each 43.53
63.28.02.4 (IV) Pit Size : 0.60 x 0.60 x 0.60 m, height at least 5 feet, each 54.83

Page 32 of 39
Item No Specification Unit Rate
Watering , Weeding (15 days interval), Hoeing, Training & Pruning (1 month
interval), Mulching (only in summer season), Stacking, Bunding, along sides
(thala making), filling the soil in and around the plants, dewatering in case of
63.28.03.1 water logging in rainy season, spraying insecticide/pesticide, putting required each 206.9
manure, fertilizer etc, complete supervision (in case of survival more than 80%)
for first year (for road side/ canal/ सावजा नक plantation) Note: watering
frequency to be increased during summer season.,

Watering , Weeding (15 days interval), Hoeing, Training & Pruning (1 month
interval), Mulching (only in summer season), Stacking, Bunding, along sides
(thala making), filling the soil in and around the plants, dewatering in case of
63.28.03.2 water logging in rainy season, spraying insecticide/pesticide, putting required each 234
manure, fertilizer etc, complete supervision (in case of survival more than 80%)
for second year (for roadside/ canal/ सावजा नक plantation) Note: watering
frequency to be increased during summer season.,

Watering , Weeding (15 days interval), Hoeing, Training & Pruning (1 month
interval), Mulching (only in summer season), Stacking, Bunding, along sides
(thala making), filling the soil in and around the plants, dewatering in case of
63.28.03.3 each 234
water logging in rainy season, spraying insecticide/pesticide, putting required
manure, fertilizer etc, complete supervision (in case of survival more than 80%)
for Third/Fourth/Fifth year (for road side/ canal/ सावजा नक plantation),

Watering, Weeding, Hoeing, Training, Pruning, Mulching, Stacking, Bunding,


along sides (thala making), filling the soil in and around the plant spraying
63.28.04.1 each 169.89
insecticide/pesticide, putting required manure and fertilizer etc, full supervision
(only in case of survival more than 80%) for first year (for block plantation),

Watering, Weeding, Hoeing, Training, Pruning, Mulching, Stacking, Bunding,


along sides (thala making), filling the soil in and around the plant spraying
63.28.04.2 each 161.87
insecticide/pesticide, putting required manure and fertilizer etc, full supervision
(only in case of survival more than 80%) for second year (for block plantation),
Watering, Weeding, Hoeing, Training, Pruning, Mulching, Stacking, Bunding,
along sides (thala making), filling the soil in and around the plant spraying
63.28.04.3 insecticide/pesticide, putting required manure and fertilizer etc, full supervision each 161.87
(only in case of survival more than 80%) for 3rd Year/4th Year/5th Year (for
block plantation),
Planting (including cutting and removal of polythene bags) pre- selected species
63.28.05 of plants at pre-prepared pit of size 0.60 x 0.60 x 0.60 m watering.(for individual
plantation),
63.28.05.1 (I) Neebu Plant (layering), each 24.32
63.28.05.2 (II) Mango plant(grafted), each 62.74
63.28.05.3 (III) Guava Plant (grafted), each 42.4
63.28.05.4 (IV) Neebu plant (T.C.), each 58.22
63.28.05.5 (V) Orange plant (budded)🍊, each 37.88
63.28.05.6 (VI) Mosambi plant (budded), each 37.88
63.28.05.7 (VII) Ber plant (Budded), each 41.27
63.28.05.8 (VIII) Anar plant (layering), each 37.88
63.28.05.9 (IX) Anar plant (Tissue culture), each 38.89

Page 33 of 39
Item No Specification Unit Rate
63.28.05.10 (X) Sitafal plant (grafted), each 48.05
63.28.05.11 (XI) Jack fruit Plant (कटहल grafted), each 60.48
56.50
63.28.05.12 (XII) Chiku Plant (grafted), each
63.28.05.13 (XIII) Guava Plant (Tissue Culture.), each 58.22
For individual plantation :- Watering, Weeding, Hoeing, Training, Pruning,
Mulching, Stacking, Bunding, along sides (thala making), filling the soil in and
63.28.06.1 around the plant spraying insecticide/pesticide, putting required manure and each 126.47
fertilizer etc, when plant planted 3m x 3m full supervision (only in case of
survival more than 85%) in first year.,

For individual plantation :- Watering, Weeding, Hoeing, Training, Pruning,


Mulching, Stacking, Bunding, along sides (thala making), filling the soil in and
63.28.06.2 around the plant spraying insecticide/pesticide, putting required manure and each 95.33
fertilizer etc, when plant planted 3m x 3m full supervision (only in case of
survival more than 95%) in second year.,

For individual plantation :- Watering, Weeding, Hoeing, Training, Pruning,


Mulching, Stacking, Bunding, along sides (thala making), filling the soil in and
63.28.06.3 around the plant spraying insecticide/pesticide, putting required manure and each 59.53
fertilizer etc, when plant planted 3m x 3m full supervision (only in case of
survival more than 100%) in third year,

For individual plantation:- Watering, Weeding, Hoeing, Training, Pruning,


Mulching, Stacking, Bunding, along sides (thala making), filling the soil in and
63.28.07
around the plant spraying insecticide/pesticide, putting required manure and
fertilizer etc, when plant planted 4m x 4m full supervision,
63.28.07.1 (I) In First Year (only in case of survival more than 85%), each 190.11
63.28.07.2 (II) In second Year ((only in case of survival more than 95%), each 137.1
63.28.07.3 (III) In third year (only in case of 100% survival), each 81.41
For individual plantation:- Watering, Weeding, Hoeing, Training, Pruning,
Mulching, Stacking, Bunding, along sides (thala making), filling the soil in and
63.28.08
around the plant spraying insecticide/pesticide, putting required manure and
fertilizer etc, when plant planted 6m x 6m full supervision,
63.28.08.1 (I) In first year (only in case of survival more than 85%), each 440.7
63.28.08.2 (II) In second Year (only in case of survival more than 95%), each 166.93
63.28.08.3 (III) In third year (only in case of 100% survival), each 164.94
For individual plantation:- Watering, Weeding, Hoeing, Training, Pruning,
Mulching, Stacking, Bunding, along sides (thala making), filling the soil in and
63.28.09 around the plant spraying insecticide/pesticide, putting required manure and
fertilizer etc, when plant planted 7.5m x 7.5m boundary plantation full
supervision,
63.28.09.1 (I) In first Year (only in case of survival more than 85%), each 180.98
63.28.09.2 (II) In second Year/third year (only in case of survival more than 95%), each 228.58
Providing and Planting (including cutting and removal of polythene bags) pre-
selected species of plants at pre-prepared pit of size 0.90 X 0.90 X 0.90 m,
63.28.10
preparation of mixture of manure & soil and filling it around the pit and
watering.(for individual plantation),

Page 34 of 39
Item No Specification Unit Rate
63.28.10.1 (I) Mango plant(grafted), each 68.7
63.28.10.2 (II) Guava Plant (grafted), each 48.36
43.84
63.28.10.3 (III) Mosambi plant (budded), each
63.28.10.4 (iv) Ber plant (budded), each 47.23
63.28.10.5 (v) chiku plant (grafted), each 66.44
63.28.10.6 (vi) kathal plant (grafted), each 66.44
Providing earthen pot , to be laid in the soil after planting.(labour component
63.28.11 each 50
included in the activity of watering),
63.28.12 Transportation for Plants,
63.28.12.1 Plants polythene size 12x25 cm plants (including loading and unloading), lead of,
63.28.12.1.1 (I) 0 to 10 km, each 1.01
63.28.12.1.2 (II) 11 to 20 km, each 1.21
63.28.12.1.3 (III) 21 to 30 km, each 1.41
63.28.12.1.4 (IV) 31 to 40 km, each 1.61
63.28.12.1.5 (V) 41 to 50 km, each 1.81
63.28.12.1.6 (VI) 51 to 60 km, each 2.11
63.28.12.1.7 (VII) 61 to 80 km, each 2.31
63.28.12.1.8 (VIII) 81 to 100 km, each 2.61
63.28.12.1.9 (IX) 101 to 124 km, each 2.82
63.28.12.1.10 (X) 125 to 150 km, each 3.02
63.28.12.1.11 (XI) 151 to 175 km, each 3.26
63.28.12.1.12 (XII) 176 to 200 km, each 3.42
63.28.12 Transportation for Plants,
63.28.12.2 Plants polythene size 15x25 cm plants (including loading and unloading), lead of,
63.28.12.2.1 (I) 0 to 10 km, each 1.25
63.28.12.2.2 (II) 11 to 20 km, each 1.51
63.28.12.2.3 (III) 21 to 30 km, each 1.74
63.28.12.2.4 (IV) 31 to 40 km, each 2.01
63.28.12.2.5 (V) 41 to 50 km, each 2.26
63.28.12.2.6 (VI) 51 to 60 km, each 2.63
2.90
63.28.12.2.7 (VII) 61 to 80 km, each
63.28.12.2.8 (VIII) 81 to 100 km, each 3.26
3.41
63.28.12.2.9 (IX) 101 to 124 km, each
63.28.12.2.10 (X) 125 to 150 km, each 3.71
63.28.12.2.11 (XI) 151 to 175 km, each 3.93
63.28.12.2.12 (XII) 176 to 200 km, each 4.03
63.28.12 Transportation for Plants, ,
63.28.12.3 Plants polythene size 20x30 cm plants (including loading and unloading), lead of,
63.28.12.3.1 (I) 0 to 10 km, each 3.02
63.28.12.3.2 (II) 11 to 20 km, each 3.65
63.28.12.3.3 (III) 21 to 30 km, each 4.28
63.28.12.3.4 (IV) 31 to 40 km, each 4.88
63.28.12.3.5 (V) 41 to 50 km, each 3.52

Page 35 of 39
Item No Specification Unit Rate
6.40
63.28.12.3.6 (VI) 51 to 60 km, each
63.28.12.3.7 (VII) 61 to 80 km, each 7
63.28.12.3.8 (VIII) 81 to 100 km, each 7.92
63.28.12.3.9 (IX) 101 to 124 km, each 8.45
63.28.12.3.10 (X) 125 to 150 km, each 9.05
63.28.12.3.11 (XI) 151 to 175 km, each 9.45
63.28.12.3.12 (XII) 176 to 200 km, each 9.85
Providing Bucket/Can for carrying water for watering plants for community
63.28.13 each 750
plantation,
500.00
63.28.14 Maintenance of the bicycle of paudhrakshak, each
Supervision Charges for GP in Community Plantation and खेत क मेड पर 2000.00
63.28.15 each
व ृ ारोपण (individual plantation) Per Year,
Supervision Charges for Paudhrakshak for Road side/Canal side/ Community
block/ Community compound Plantation Per Year(पयवे ण शु क पौधर क,
63.28.16 each 2000
तवष हेतु : सड़क कनारे / नहर कनारे / सामद ु ा यक/ सावज नक प रसर हे तु
व ृ ारोपण ),
Providing and fixing bamboo tree guard with 12 rows of horizontal split bamboo
tightened to bamboo poles 2m long, 1.7m above and 0.3m below ground level,
63.28.17 4 numbers in each tree guard. Average dia of bamboo pole shall be 8cm to each 350
12cm. The spit bamboo used shall be 80cm in length having average dia 25mm
and c/c spacing of split bamboo will be 13cm.,
63.28.18 Deduct if filling the dug pit in any year except first year, each 3
Filling dug pits with manure/compost for dugpit size 0.90mx0.90mx0.90m(using 47.14
63.28.19 each
Manure and Excavated earth for filling),
Preparation of Germination bed 10.00mx1.00x0.50m =5cum/bed i/c excavation
63.28.20 , picking of boulders, kankar etc breaking clods and filling with fertile soil, sand each 274.45
and FYM,
63.28.21.1 Purchasing i/c sowing of seeds per bed (Seeds of Jamun), each 967.64
967.64
63.28.21.2 Purchasing i/c sowing of seeds per bed (Seeds of aam), each
63.28.21.3 Purchasing i/c sowing of seeds per bed (Seeds of ber guthli), each 967.64
63.28.21.4 Purchasing i/c sowing of seeds per bed (Seeds of Ashok plant), each 967.64
63.28.21.5 Purchasing i/c sowing of seeds per bed (Seeds of Neebu), each 967.64
63.28.21.6 Purchasing i/c sowing of seeds per bed (Seeds of Guava), each 967.64
63.28.21.7 Purchasing i/c sowing of seeds per bed (Seeds of Khirni), each 967.64
63.28.21.8 Purchasing i/c sowing of seeds per bed (Seeds of Jamberi), each 967.64
63.28.21.9 Purchasing i/c sowing of seeds per bed (Seeds of kejurina), each 967.64
63.28.21.10 Purchasing i/c sowing of seeds per bed (Seeds of Imli), each 967.64
63.28.21.11 Purchasing i/c sowing of seeds per bed (Seeds of Kesiya Semiya), each 967.64
63.28.21.12 Purchasing i/c sowing of seeds per bed (Seeds of Munga), each 967.64
63.28.21.13 Purchasing i/c sowing of seeds per bed (Seeds of Kuchla), each 967.64
63.28.21.14 Purchasing i/c sowing of seeds per bed (Seeds of saphed siras), each 967.64
63.28.21.15 Purchasing i/c sowing of seeds per bed (Seeds of kaala siras), each 967.64
63.28.21.16 Purchasing i/c sowing of seeds per bed (Seeds of Kachanaar), each 967.64
63.28.21.17 Purchasing i/c sowing of seeds per bed (Seeds of Beeja) each 967.64
63.28.21.18 Purchasing i/c sowing of seeds per bed (Seeds of sissoo), each 967.64
63.28.21.19 Purchasing i/c sowing of seeds per bed (Seeds of khamair), each 967.64

Page 36 of 39
Item No Specification Unit Rate
63.28.21.20 Purchasing i/c sowing of seeds per bed (Seeds of Peltaaphoram), each 967.64
63.28.21.21 Purchasing i/c sowing of seeds per bed (Seeds of soobabool), each 967.64
63.28.21.22 Purchasing i/c sowing of seeds per bed (Seeds of aamvla), each 967.64
63.28.21.23 Purchasing i/c sowing of seeds per bed (Seeds of sheesham), each 967.64
63.28.21.24 Purchasing i/c sowing of seeds per bed (Seeds of sagon high quality), each 967.64
63.28.21.25 Purchasing i/c sowing of seeds per bed (Seeds of Gararee), each 967.64
63.28.21.26 Purchasing i/c sowing of seeds per bed (Seeds of lendya), each 967.64
63.28.21.27 Purchasing i/c sowing of seeds per bed (Seeds of kusum), each 967.64
63.28.21.28 Purchasing i/c sowing of seeds per bed (Seeds of Dhaavada), each 967.64
63.28.21.29 Purchasing i/c sowing of seeds per bed (Seeds of kardhya), each 967.64
63.28.21.30 Purchasing i/c sowing of seeds per bed (Seeds of gulmoher), each 967.64
63.28.21.31 Purchasing i/c sowing of seeds per bed (Seeds of mahua), each 967.64
63.28.21.32 Purchasing i/c sowing of seeds per bed (Seeds of achaar), each 967.64
63.28.21.33 Purchasing i/c sowing of seeds per bed (Seeds of reetha), each 967.64
63.28.21.34 Purchasing i/c sowing of seeds per bed (Seeds of kullu), each 967.64
63.28.21.35 Purchasing i/c sowing of seeds per bed (Seeds of baheda), each 967.64
63.28.21.36 Purchasing i/c sowing of seeds per bed (Seeds of harra), each 967.64
63.28.21.37 Purchasing i/c sowing of seeds per bed (Seeds of arjun), each 967.64
63.28.21.38 Purchasing i/c sowing of seeds per bed (Seeds of prosopice), each 967.64
63.28.21.39 Purchasing i/c sowing of seeds per bed (Seeds of jharul), each 967.64
63.28.21.40 Purchasing i/c sowing of seeds per bed (Seeds of anjan), each 967.64
63.28.21.41 Purchasing i/c sowing of seeds per bed (Seeds of bhilwa), each 967.64
63.28.21.42 Purchasing i/c sowing of seeds per bed (Seeds of ratanjot), each 967.64
63.28.21.43 Purchasing i/c sowing of seeds per bed (Seeds of karanj), each 967.64
63.28.21.44 Purchasing i/c sowing of seeds per bed (Seeds of tendu), each 967.64
63.28.21.45 Purchasing i/c sowing of seeds per bed (Seeds of bel ), each 967.64
63.28.21.46 Purchasing i/c sowing of seeds per bed (Seeds of haldu), each 967.64
63.28.21.47 Purchasing i/c sowing of seeds per bed (Seeds of caitha), each 967.64
63.28.21.48 Purchasing i/c sowing of seeds per bed (Seeds of shikakai phallee), each 967.64
63.28.21.49 Purchasing i/c sowing of seeds per bed (Seeds of Lahasoda ), each 967.64
63.28.21.50 Purchasing i/c sowing of seeds per bed (Seeds of saaja), each 967.64
63.28.21.51 Purchasing i/c sowing of seeds per bed (Seeds of Babul), each 967.64
Preparation of bed to keep Polythene bags . Earth work in excavation in beds
not exceeding 1.5m in width and the like not exceeding 10sqm on plan including
dressing of sides and levelling of bottoms lift upto 1.5m including getting out
63.28.22 each 200.77
the excavated soil and disposal of surplus excavated soil to make pathway with
dressing and ramming with hand rammer or as directed, within a lead of 20m
(For one bed of size 10m x 1m x0.15m=1.5cum). analysis for 1 bed.,
Providing And Placing Poly-bags Including filling (15 cm x25 cm in size, 250mm
63.28.23.1 gauge ,Mulching sheet 40 micron, Fertile Soil, sand and Farm yard manure and each 3.57
mixed in 1:1:1 (soil,sand,FYM) ratio per plant,
Providing And Placing Polybags including filling (20 cm x30 cm in size, 300mm
gauge, Mulching sheet 40 micron, Fertile Soil,sand and Farm yard manure and
63.28.23.2 each 5.92
mixed in 1:1:1 (soil,sand,FYM) ratio per plant-when transplanted directly from
germination bed to polybags of size 20cm x 30cm.,

Page 37 of 39
Item No Specification Unit Rate
Providing And Placing Poly-bags Including filling (30 cm x40 cm in size, 350mm
gauge ,Mulching sheet 40 micron, Fertile Soil, sand and Farm yard manure and 9.70
63.28.23.3 each
mixed in 1:1:1 (soil,sand,FYM) ratio per plant - when transplanting from
polybags of size 20cm x 30cm to polybags of size 30cm x 40cm.,

Providing And Placing Polybags including filling (20 cm x 30 cm in size, 300mm


gauge, Mulching sheet 40 micron, Fertile Soil,sand and Farm yard manure and
63.28.23.4 each 4.86
mixed in 1:1:1 (soil,sand,FYM) ratio per plant -when transplanting from polybags
of size 15cm x 25cm to polybags of size 20cm x 30cm.,
Transplanting of Plants From Germination bed to Polythene bag (per plant rate) -
when transplanting from polybags of size 15cm x 25cm to polybags of size
63.28.24 each 0.68
20cm x 30cm) or transplanting from polybags of size 20cm x 30cm to polybags
of size 30cm x 40cm),
Grading and Shifting Of Nursery Plants (Thrice in a Year) per plant- (to be used
63.28.25 each 1.09
for Polybag 0f size 20cm x 30cm or polybag of size 30cm x 40cm ),
Grading and Shifting Of Nursery Plants (Thrice in a Year) per plant-(to be used
63.28.26 each 0.67
for polybags of size 15cm x 25cm),
Complete Supervision and maintainance in a Year (including Watering, Hoeing,
63.28.28 each 3.64
Spraying Insecticide/Pesticide, manuring) per plant.,
63.28.29 Budding and grafting of plants in the nursery., each 5.68
63.28.30.1 For Nursery : Loading of Plants in vehicle (1 year old)., each 0.34
0.56
63.28.30.2 For Nursery : Loading of plants in vehicle (2 years old), each
63.28.30.3 For Nursery: Loading of Plants in vehicle (3 year old)., each 1.13
63.28.32 Providing tools and equiments for nursery per plant, each 0.14
63.28.33 Add for expenses on electricity/diesel for Irrigation (to be used in nursery), Day 50
Providing & fixing shade net by bamboos including fixing, bracing and binding
63.28.34 with nylon rope etc complete at site. For protection of nursery plant from hot sqm 52.48
and cold waves.,
Preparation of land :-Fork ploughing, using cultivator 2 times ,cleaning
63.30.01 stubbles,clearing clods and formation of ridges .Providing and spreading Hecter 42718.52
fertilizers.Irrigation (excluding the cost of electricity),
63.30.02 Planting of root slip for fodder cultivation, Hecter 53236.56
63.30.03 Irrigation for fodder cultivation,
For first time/second time/third time/ fourth time/ fifth time in first
63.30.03.1 Hecter 1591.04
year/second year/third year/fourth year/fifth year,
63.30.03.2 For the sixth time in first year., Hecter 1591.04
63.30.03.3 For the sixth time in second year/third year/fourth year/fifth year., Hecter 1988.8
4972.00
63.30.04 Raking and earthing, Hecter
63.30.05 Maintenance and plant protection(weeding).,
63.30.05.1 (I) Providing and spreading fertilizers for the first time in first year, Hecter 4745.1
(II) Providing and spreading FYM and fertilizers for second time/third
63.30.05.2 Hecter 7443.72
time/fourth time/fifth time in first year,
63.30.05.3 (III) Providing and spreading FYM and fertilizers for the last time in first year, Hecter 7244.84

Page 38 of 39
Item No Specification Unit Rate
(IV) Providing and spreading FYM and fertilizers for first time in second
63.30.05.4 Hecter 3949.58
year/third year/fourth year/fifth year.,
(V) Providing and spreading FYM and fertilizers for second time/third
63.30.05.5 Hecter 3936.2
time/fourth time/ fifth time in second year/third year/fourth year/fifth year.,
(VI) Providing and spreading FYM and fertilizers for the last time in second
63.30.05.6 Hecter 3538.44
year/third year/fourth year/fifth years.,
63.30.06 Harvesting the fodder,
3977.60
63.30.06.1 (I) For the first time in first year, Hecter

63.30.06.2 (II) For second time/third time/fourth time/fifth time/ sixth time in first year., Hecter 3182.08
(III) For first time/ second time/third time/fourth time/fifth time in second
63.30.06.3 Hecter 3380.96
year/third year/fourth year/fifth year,
63.30.06.4 (IV) For the last time in second year/third year/fourth year/fifth year, Hecter 2983.2
63.30.07 Charagah plantation in Bund,
(I) Watering , Weeding , Hoeing, Training & Pruning, Mulching ,Stacking,
Bunding, along sides (thala making), filling the soil in and around the plants,
63.30.07.1 spraying insecticide/pesticide, putting required manure, fertilizer etc, when each 190.11
planted 3m x 3m, complete supervision (in case of survival more than 80%) for
first year.,
(II) Watering , Weeding , Hoeing, Training & Pruning, Mulching ,Stacking,
Bunding, along sides (thala making), filling the soil in and around the plants,
63.30.07.2 spraying insecticide/pesticide, putting required manure, fertilizer etc, when each 135.11
planted 3m x 3m, complete supervision (in case of survival more than 80%) for
second year.,
(III) Watering , Weeding , Hoeing, Training & Pruning, Mulching ,Stacking,
Bunding, along sides (thala making), filling the soil in and around the plants,
63.30.07.3 spraying insecticide/pesticide, putting required manure, fertilizer etc, when each 99.31
planted 3m x 3m, complete supervision (in case of survival more than 80%) for
third/fourth/fifth year.,
Add for expanses on electricity/diesel for Irrigation (to be used in fodder
63.30.08 Day 50
development project),

Page 39 of 39

Potrebbero piacerti anche