Sei sulla pagina 1di 3

Session Plan

Sector : INFORMATION AND COMMUNICATION TECHNOLOGY


Qualification Title : Computer System Servicing NC2
Unit of Competency : SET-UP COMPUTER NETWORKS
Module : COMPUTER NETWORKS CONFIGURATION

Learning Outcomes:
LO1. Install Network Cable
LO2. Set network configuration
LO3. Set router/Wi-Fi/ wireless access point/repeater configuration
LO4. Inspect and test the configured computer networks

 Introduction
This session plan covers the knowledge, skills and attitudes needed to Install and configure computer network. This will guide you how to set-up network cables,
configure wireless Ad Hoc connection, configure router and access point and Inspect and test the configured computer networks .
B. Learning Activities
LO 1: Install network cables
Learning Content Methods Presentation Practice Feedback Resources Time
 network  Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM
design 2.1-1 on network 2.1-1 to Answer Key 2.1-1
 Self-paced
instruction Topology

 Network  Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM
Materials 2.1-2 on Network 2.1-2 to Answer Key 2.1-2
 Self-paced
instruction Terminals
 Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM
2.1-3 on Network 2.1-3 to Answer Key 2.1-3
 Self-paced
instruction Cables

 Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM


2.1-4 on Cabling 2.1-4 to Answer Key 2.1-4
 Self-paced
instruction Pathways

 Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM


2.1-5 on Terminal Box 2.1-5 to Answer Key 2.1-5
 Self-paced
instruction

 Tools,  Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM
equipment 2.1-6 on Tools, 2.1-6 to Answer Key 2.1-6
 Self-paced
and testing instruction equipment and
devices testing devices

 Splicing  Lecture Read Information sheet Answer the Self-  Compare answers  CBLM
2.1-7 on Splicing Check 2.1-7 to Answer Key 2.1-7
 Demonstration
 Self-paced
instruction

Read task sheet 2.1-1 Perform task sheet  Evaluate own


2.1-1 performance using
performance
criteria checklist
2.1-1

 Installation  Lecture Read Information sheet  Answer Self-Check  Compare answers  CBLM
requirement 2.1-8 on 2.1-8 to Answer Key 2.1-8
 Demonstration
Installation
 Self-paced
instruction
requirement
D. C. Assessment Plan
Practical Demonstration with Oral Questioning on on network and cable installation, AdHoc connection and proper configuration of router and access point.
E. Performance Test: actual installation of network cables and devices and proper configuration of router and access point.
F. D. Teacher’s Self-Reflection of the Session

Potrebbero piacerti anche