Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
REWOCARE® HV 100
Prevents any kind of gelling problems – good Storage and Processing Recommendation
stabilizer
We recommend the following storage conditions:
Evonik Industries Nutrition & Care GmbH | Rewocare® | November 2016 Page 1/2
Formulations
Preparation Preparation
Mix the water (heated to 30°C (±2°C)) and the Mix the water (heated to 30°C (±2°C)) and the
dyestuff. Slowly disperse the REWOCARE® HV 100, dyestuff. Slowly disperse the REWOCARE® HV 100,
and mix for about 5 minutes. Slowly disperse the and mix for about 5 minutes. Slowly disperse the
REWOQUAT® WE 18 E BR (preheated to REWOQUAT® WE 18 E BR (preheated to
approximately 55°C while stirring). Cool to below approximately 55°C while stirring). Cool to below
30°C before adding the perfume oil. The final 30°C before adding the perfume oil. The final
viscosity will depend on the mixing equipment viscosity will depend on the mixing equipment
and rest of composition (such as perfume or and rest of composition (such as perfume or
water hardness), expected to be approximately water hardness), expected to be approximately
1000 cPs (LVT, 30 rpm, 25°C). 600 cPs (LVT. 30 rpm, 25°C).
The REWOCARE® HV 100 can also be incorporated The REWOCARE® HV 100 can also be incorporated
at the end of the dispersion. at the end of the dispersion.
Product Safety
Please refer to our Material Safety Data Sheet
(MSDS) or contact your local representative for
more information.
Trademark and Legal Notice This information and all further technical advice is based on our present knowledge and experience.
However, it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual
property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in
the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further
developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods.
Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the
sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply
that similar products could not be used.
Evonik Degussa (China) Co. Ltd. Shanghai Branch 55 Chundong Road, Xinzhuang Industry Park,
Shanghai, China 201108
Phone +86 21 6119 1000 Fax +86 21 6119 1264
Evonik Degussa Brasil Ltda Rua Arquiteto Olavo Redig de Campos, 105 – São Paulo - Brazil
Phone +55 11 3146-4095