Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
40H SERIES
Heavy Duty Mortise Locks
TABLE OF
CONTENTS
FEATURES 1. Solid one-piece stainless steel anti-friction latch provides 50% more
surface contact with strike for superior strength and security. Reversible latch
rotates 180 degrees for easy handing change without opening case.
7 4 2 3 Precision-engineered curve provides enhanced cycle life with reduced wear to
the strike.
2. Non-handed cylinder retainer.
3. Armored front completely surrounds latch and deadbolt providing increased
lateral strength. Staked assembly design allows the armored front to self-align
with the door bevel during installation.
8
4. Enhanced case integrity achieved through four case cover screws (one at
each corner), plus interlocking armored front and cover design at the latch.
1 5. Roller bearing hub mechanism provides smooth, wear resistant operation.
6. Locking toggle includes clear indication of “locked” and “unlocked” states.
7. 40H case, cover, and armored front manufactured from 0.095” cold rolled steel
for strength and durability.
8. Fusible link.
9. Four position hub toggle design determines whether each hub is always locked,
always unlocked, or locked by key for easy handing change without opening
case.
10. Lever return spring mechanism located in trim for enhanced protection against
lever droop, providing a firm, positive return of the lever to the horizontal
position.
11. Self-aligning trim mechanism for fast, easy, and accurate installation.
12. Curved lip strike and strike box assembly provides an aesthetic, non-handed
solution to complement field reversible case.
5 9 6 13. Solid machined cylinder rings with wavy washer provides resistance to
40H wrenching of cylinder. Cylinder security screw prevents removal of cylinder
CUTAWAY without first removing interchangeable core.
14. Visual indicator shows a padlock icon open for unlocked and padlock icon
closed and painted red for locked.
13 15. Non-handed stainless steel auxiliary bolt for ease of changing hand. (not shown)
unlocked locked
12
11
10 14
6 40H Strike box & strike Visual Indicators
EXPLODED
2 HEAVY DUTY M
SPECIFICATIONS
SPECIFICATIONS
Finishes:
• 605 – bright brass, clear coated
• 606 – satin brass, clear coated
• 611 – bright bronze, clear coated
ADA-Americans With Disabilities Act: • 612 – satin bronze, clear coated
45H Series - The design and operation of the BEST® mortise lock • 613* – oxidized satin bronze, oil rubbed
meets the intent of the standard for ANSI A117.1 section 404.2.6. • 618 – bright nickel plated, clear coated (brass base material)
• 619 – satin nickel plated, clear coated (brass base material)
Builders Hardware Manufacturers Association:
• 622 – flat black coated (brass base material)
45H Series - ANSI A156.13, Series 1000, Grade 1 Operation and
• 625 – bright chromium plated (brass base material)
Strength, Grade 2 Security. To meet Grade 1 Security, a drill resistant
• 626 – satin chromium plated (brass base material)
core (1CD, 1CDP, 1CDF, or 1CDX) must be used with escutcheon
• 629 – bright stainless steel
trims, and 1E7K4 high security cylinder must be used with sectional
• 630 – satin stainless steel
trims.
• 690* – dark bronze coated (brass base material)
47H Series - ANSI A156.13, Series 1000, Grade 1 Operational, *613 finish is designed to wear over time, providing an “antique” appearance.
Strength, and Security. 690 finish will continue as a dark brown appearance over time.
Underwriters Laboratories®
Antimicrobial Finish
The 40H series is listed by Underwriters Laboratories for use on a
• 626AM – satin chrome plated with UltraShield™ UltraShield™
3 hour A label doors. These locks also carry the C-UL mark which
antimicrobial protected coating
is officially accepted in all of Canada, indicating compliance with
• 630AM – satin stainless steel with UltraShield™
appropriate Canadian standards and codes. The 47H series locks
antimicrobial protected coating
conform to UL437 standard for key locks, referencing door locks.
The 1E7J4 cylinder used in the 47H series also conforms to UL437 The Stanley Security Solutions UltraShield™ finish inhibits the growth
standard for key locks, referencing high security cylinders, and is of bacteria and other microbes on the surface of the hardware.
listed for Canada as well as the United States. NOTE: Stanley’s UltraShield™ option is recommended for use on any hardware
application where product cleanliness is a high priority. i.e;. Hospital/Healthcare,
Florida Building Code (FBC) Listed and Miami-Dade County Code Elderly Care, Education, Transportation, Food-Service, Hospitality.
Compliance Office
See certification listing for all 40H series lock functions that are #4 Knob: Diameter – 2 1/8” ; Projection on door – 2 7/8” Material
certified for use in applications requiring a design pressure rating machined from solid brass or bronze.
as specified. Decorative and Special Order Lever Handles: Stainless
steel base material with applied finish.
Description Model Single Door Double
Door Standard Lever Handles: Brass, bronze, or stainless steel base
PSF w/o DeadBolt 45H and 47H +-60 +-35 material for standard lever designs. Lever styles #3, #14, and #15
PSF w/ DeadBolt 45H and 47H +-100 +-50 return to a minimum of 1/2” of door surface. Lever styles #3 and #14
PSF w/ DeadBolt 48H and 49H +-50 +-50 conform to California Titles 19 and 24. Lever styles 12, 16 and 17 do
The 40H series lock has received a notice of acceptance from not return. Levers project 2 15/16” from door surface with H, J, R and S
Miami-Dade County and is considered Miami-Dade County product. trim. Levers project 3 1/64” with M and N trim.
Auxiliary bolt: Stainless steel, non-handed. Roses: Wrought brass, bronze, or stainless steel base material.
H – Flat w/ round edge, 2 3/4” diameter.
Backset: 2 3/4” R – Contoured w/ round edge, 2 3/4” diameter.
Case: 0.095” cold rolled steel, 5 7/8” H x 7/8” D x 4 1/16” W. Steel is zinc S – Flat w/ beveled edge, 3 1/2” diameter.
dichromate plated for corrosion protection. Escutcheons: J – Wrought brass, bronze, or stainless steel base
Deadbolt: Stainless steel, 1” throw. material, 7 1/2” H x 2 9/32” W x 17/32” T. M & N – Forged brass or bronze,
Latchbolt: Solid stainless steel, 3/4” throw. Latch is oil-impregnated 8” H x 2 1/8” W x 37/64” T, through bolt mounted (no exposed screws
for anti-friction operation. Reversible without opening case. outside). M – Standard cylinder; N – Concealed cylinder.
Strike: For complete strike package spec’s see page 5. Vandal Trim: VT–Vandal trim is available in standard finish for H, J,
M, N, R, and S trims in either #14 or #15 levers.
Door Thickness: Standard lock configuration designed for doors 1
NOTE: Not available in single or dummy trim functions. If compliance to California
3
/4” thick. Thick door configuration available for doors up to 5” thick Building Code Title 19 & 24 is required, the #14 lever design must be specified.
(specify thickness when ordering).
Visual Indicators: VIN–Visual indication uses an unlocked padlock
Faceplate: Stainless steel, brass or bronze material, 8” H x 1 1/4” or locked padlock image with red background to indicate lock state.
W x 1/16” T. Lock face automatically adjusts to proper bevel during
installation.
Products protected by one or more of the following patents:
4,873,853 5,590,555 5,794,472
ORTISE LOCKS 3
UNIVERSAL LOCK
In addition to the ability to quickly change the lock handing, the universal case design of the 40H provides the ability to reconfigure a lock
into many different functions easily and quickly, often by rearranging existing parts without disassembling the lock case. The efficiency of
the design enables over 12 of the most commonly used lock functions to be included in just 3 case configurations.
The 40H provides the ability to postpone decisions on how the lock will be configured all the way up to the point of installation, making it one
of the most flexible and user-friendly mortise locks available. This translates into value for anyone involved in the process, whether they’re
an architect, specification writer, distributor, or end-user.
FLEXIBILITY IN ORDERING
FLEXIBILITY IN ORDERING
Stanley/BEST offers three ways in which to order the 40H mortise lock. YOU get to choose which method meets your needs.
Universal Lock
If you want to keep your options open, this method of ordering UNR ANSI UNT ANSI UNAB ANSI
the 40H is for you. BEST® has developed three “universal” A – office F04 L – privacy F19 AB – office F20
functions that can be configured to a variety of common AT – office F04 T – dormitory F13 TA – dormitory F12
functions, all without opening the lock case. When any of the D – storeroom F07 TD – dormitory
universal functions are ordered as a complete lock, all the N – passage F01
necessary parts (including trim) are provided to configure NX – exit F31
any of the functions in that group. R – classroom F05
FOUR-PART LOCK
4 HEAVY DUTY M
UNIVERSAL LOCK CONCEPT
FUNCTION LETTER CHART
Parts Ordering Made Easy ANSI 45H/47H ANSI 45H/47H
No more searching through service manuals or calling technical 1DT F19 L
support for the right part numbers. BEST® has developed a variety 2DT F02 LB
of kits you can order when you only need part of a 40H mortise, F04 A LT
rather than the whole lock.
F20 AB F01 N
Case Only F04 AT F31 NX
A Case Only lock includes all parts normally included with a F21 B F05 R
complete lock that are not specifically associated with either B5 F06 RHB
the inside or outside trim, including: lock case, face plate, strike B7 F35 S
and strike box, fasteners (for case and strike), and installation
F08/F10 BA F13 T
instructions.
BW F12 TA
Case Only mortise locks will be shipped in the standard
F09 C TD
mortise packaging, allowing trim kits to be included at a
future date to make a complete lock. CHB F30 W
F07 D F17 AD
Trim Kit F14 G F29 RD
A 40H Trim Kit is simply one half of a complete trim package. An F15 H F16 WD
Outside Trim Kit must always be matched up with an Inside Trim
F15 HJ F18 YD
Kit to operate with a lock. Each kit includes all the necessary parts
(including fasteners) required for installation that are associated F34 INA UNR
with just the one side of the door. F33 IND UNT
F32 INL UNAB
Lever Set
A lever set kit provides the inside lever assembly (with set screw)
and outside lever assembly (with spindle attached). Thick Door
and Tactile Lever options are available for this kit.
STRIKE PACKAGES
Faceplate Kit Strike Packages
Face Plate kit includes a finished faceplate and the appropriate S1 – Standard strike:
screws. Security Head screws are an option for this kit. 4 7/8” x 1 1/4” x 3/32”, non-handed,
curved lip, 1 1/4” lip to center strike.
Replacement Spindle Fits standard door frame ANSI A115.1,
As a security feature, the outside spindle on the 40H is designed and comes with plastic strike box.
to twist off during abuse before any internal damage to the
lock occurs. The Replacement Spindle kit is a quick, easy, and
inexpensive way to replace any spindles damaged by attack or
abuse. This kit includes the inside and outside spindles, plus the S1 – Standard strike
pin to attach the outside lever.
S5 – Latchbolt-only strike:
Screw Kit 4 7/8” x 1 1/4” x 3/32”, handed, curved lip,
Nothing’s more frustrating than spending time searching for the 1 1/4” lip to center strike. Fits standard
part number of a single screw. With the 40H Screw Kits, you don’t door frame ANSI A115.1, and comes
have to worry about that anymore. These kits have been designed with wrought steel strike box.
to provide all the necessary fasteners for one lock in a single bag.
All you need to know is the trim style and finish, and you’re set.
Security head screws are an option for this kit.
S5 – Latchbolt-only strike
S6 – Latchbolt/Deadbolt strike:
4 7/8” x 1 1/4” x 3/32”, handed, curved lip,
1 1/4” lip to center strike. Fits standard
door frame ANSI A115.1, and comes
with wrought steel strike box.
S6 – Latchbolt/Deadbolt
ORTISE LOCKS 5
HOW TO ORDER
6 HEAVY DUTY M
HOW TO ORDER
HOW TO ORDER: 40H STRIKE PACKAGES
40HST 1 626
Series Kit Number Finishes Options
40HST– strike S1– standard strike 605 606 611 Thick Door– (specify thickness if other
package S5– latchbolt-only strike 612 613 618 than 1 3/4” )
S6– latchbolt/deadbolt strike 619 622 625 7/8LTC– 7/8” lip-to-center strike
4– strike box only 626 629 630 SH– security head screws
690
page 4-5 page 3
page 3
*Complies with California Building Code Title 10 and Title 24, part 12
ORTISE LOCKS 7
SPECIAL FEATURES
SPECIAL FEATURES
Lead Lined Feature – The 40H mortise lock can be lead lined to protect against x-rays. Since the majority of lead lined doors contain the lead
in the surface of the door, the 40H provides lead lining for the holes cut in the door when preparing the door for the trim. The cylinder hole
is lead lined.
To order: designate “LL” on order procedure (page 6-7)
Tactile Feature Knob/Lever – This option is for use in applications where special notice is needed to warn the blind about safety or
accessibility environments. Depending on the style ordered, the knob or lever will receive either grooves or knurling as the tactile feature.
To order: designate “TL” on 45H/47H knobs/levers in order procedure (page 6-7).
Visual Indicator Feature – This option adds a visual indicator for certain functions that visually reflects whether the lockset
is in the locked or unlocked state. This option is available for the following functions: TD– Dormitory, IND– Intruder, INL– Intruder,
L– Privacy, LT– Privacy, S– Storeroom. Visual indicator feature is standard on the H– Hotel function (page 2).
Vandal Trim – VT–Vandal trim is available in standard finish for H, J, M, N, R, and S trims in either #14 or #15 levers.
Note: Not available in single or dummy trim functions. If compliance to California Building Code Title 19 & 24 is required, the #14 lever design must be specified.
SERVICE EQUIPMENT
SERVICE EQUIPMENT
HAND OF DOOR
OUTSIDE OUTSIDE
Left hand Right hand
Left hand (LH) Right hand (RH) reverse bevel reverse bevel
(LHRB) (RHRB)
8 HEAVY DUTY M
A. Locksets and Latchsets:
ORTISE LOCKS 9
40H SERIES – STANDARD LEVERS, KNOB & TRIMS
10 HEAVY DUTY M
40H SERIES – STANDARD LEVERS, KNOB & TRIMS
40H SERIES - STANDARD LEVERS,KNOB & TRIMS
ORTISE LOCKS 11
40H SERIES – DECORATIVE LEVERS
40H SERIES
S - DE
DECORATIVE LEVERS
# 50 # 51 # 52
# 53 # 54 # 55
# 60 # 61 # 62
# 63 # 64 # 65
# 66 # 67 # 68
# 69 # 70 # 71
# 72 # 73 # 74
12 HEAVY DUTY M
40H SERIES – DECORATIVE LEVERS
40H SERIES - DECORATIVE LEVERS
# 75 #76 # 77
# 78 # 79 # 80
# 81 # 82 # 83
# 84 #85 # 86
# 87 # 88 # 89
# 90 # 91
ORTISE LOCKS 13
FUNCTIONS
FUNCTIONS
Function & Diag. Description Outside Lever or Knob Inside Knob/Lever
ANSI No. Latch operated by Deadbolt operated Locked by Unlocked by Locked by Unlocked by
by
Single Keyed
A-Office (F04) • Rotating inside lever, N/A Placing locking toggle Placing locking Cannot be locked Always unlocked
• Rotating outside in locked position toggle in unlocked
lever– only position
when locking
toggle is in unlocked
position,
• Turning key in outside
cylinder.
The latchbolt is deadlocked with an auxiliary deadlatch
AB-Office (F20) • Rotating inside lever, • Turning key in • Placing locking toggle Turning key in Cannot be locked Always unlocked
• Rotating outside outside cylinder, in locked position, outside cylinder
lever–only when • Inside turn lever, • Projecting dead-bolt and placing locking
locking toggle is in • Inside lever retracts by key or turn lever. toggle in unlocked
unlocked deadbolt and latch position
position, simultaneously.
• Turning key in outside
cylinder.
The latchbolt is deadlocked with an auxiliary deadlatch
AT-Office (F04) • Rotating inside lever, N/A • Turning inside lever, • Turning inside turn Cannot be locked Always unlocked
• Rotating outside lever • Turn key in outside lever,
only when unlocked cylinder. • Turning key in
by key or turn lever, outside cylinder.
• Turning key in outside
cylinder.
The latchbolt is deadlocked with an auxiliary deadlatch. Throwing deadbolt blocks out all keys except “ER” key.
R-Classroom (F05) • Rotating inside N/A Turning key in outside Turning key in outside Cannot be locked Always unlocked
lever, cylinder cylinder
• Rotating outside lever
only when unlocked
by key,
•Turning key in outside
cylinder.
14 HEAVY DUTY M
FUNCTIONS
FUNCTIONS
Function & Diag. Description Outside Lever or Knob Inside Knob/Lever
ANSI No. Latch operated by Deadbolt operated Locked by Unlocked by Locked by Unlocked by
by
Single Keyed (continued)
T-Dormitory (F13) • Rotating inside lever, • Turning key in out- • Turning key in • Turning key in Cannot be unlocked Always unlocked
• Rotating outside side cylinder, outside cylinder, outside cylinder,
lever—only when • Inside turn lever, • Turning inside • Turning inside
deadbolt is retracted • Inside lever retracts turn lever. turn lever.
• Turning key in out deadbolt and latch • Rotating inside lever.
side cylinder. simultaneously.
TA- Dormitory (F12) • Rotating inside lever, • Turning key in • Placing locking Turning key in Cannot be locked Always unlocked
• Rotating O/S lever outside cylinder, toggle in locked outside cylinder and
only when locking • Turning inside turn position, placing locking toggle
toggle is in unlocked lever. (Rotating • Projecting in unlocked position
position and deadbolt inside lever retracts deadbolt by key
is retracted, deadbolt and latch or turn lever.
• Turning key in outside simultaneously.)
cylinder.
TD-Dormitory • Rotating inside • Turning inside turn Always locked Cannot be unlocked Cannot be unlocked Always unlocked
lever, lever,
• Turning key in outside • Rotating inside lever
cylinder. retracts deadbolt
and latch
simultaneously.),
• Turning key in out-
side cylinder.
The latchbolt is deadlocked with an auxiliary deadlatch
Non-Keyed
L-Privacy (19) • Rotating inside lever, • Turning the • Turning inside • Turning inside turn Cannot be locked Always unlocked
• Rotating outside lever emergency key, turn lever, lever,
only when deadbolt is • Turning inside turn • Turning the • Rotating inside lever
retracted. lever. (Rotating emergency key. retracts latch and
inside knob/lever dead-bolt simul-
retracts deadbolt taneously,
and latch • Turning the
simultaneously.) emergency key.
LT-Privacy (F19) • Rotating inside lever, N/A • Turning inside • Turning inside Cannot be locked Always unlocked
• Rotating outside lever turn lever, turn lever,
only when turn knob • Turning the • Rotating inside lever,
is unlocked. emergency key. • Turning the
emergency key.
N-Passage (F01) Rotating inside or N/A Cannot be unlocked Always locked Cannot be locked Cannot be locked
outside lever
NX-Exit (F31) Rotating inside lever N/A Always locked Cannot be locked Cannot be locked Always unlocked
ORTISE LOCKS 15
FUNCTIONS
FUNCTIONS
Function & Diag. Description Outside Lever or Knob Inside Knob/Lever
ANSI No. Latch operated by Deadbolt operated Locked by Unlocked by Locked by Unlocked by
by
Double Keyed
*C-Public • Rotating inside lever, N/A Turning key in inside Turning key in inside Cannot be locked Always unlocked
Entrance (F09) • Rotating outside lever cylinder cylinder
only when unlocked
by key in inside
cylinder,
• Turning key in outside
cylinder only.
The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.
CHB-Holdback • Turning outside key, N/A Turning key in inside Turning key in inside Cannot be locked Always unlocked
• Rotating outside lever cylinder cylinder
only when unlocked
by key in inside
cylinder,
• Inside lever,
• Latchbolt held
retracted by turning
inside key while
holding up on inside
lever.
The latchbolt is deadlocked with an auxiliary deadlatch.
G-Communicating • Rotating inside Turning key in outside Turning key in inside or Turning key in inside or Turning key in inside or Turning key in inside or
(F14) lever (Retracts the or inside cylinder outside cylinder outside cylinder outside cylinder outside cylinder
deadbolt and latch
simultaneously).
IND-Intruder (F33) • Turning key in inside • Turning key in outside Extending the deadbolt • Retracting the Cannot be locked Always unlocked
or outside cylinder, or inside cylinder, by turning key deadbolt by turning
• Rotating outside lever • Rotating inside in inside or outside key in inside or
when deadbolt is lever (Retracts the cylinder outside cylinder,
retracted, deadbolt and latch • Rotating inside
• Rotating inside lever. simultaneously). lever (Retracts the
deadbolt and latch
simultaneously).
INL-Intruder (F32) • Rotating inside lever, N/A Turning key in inside or Turning key in inside or Cannot be locked Always unlocked
• Rotating outside lever outside cylinder outside cylinder
only when unlocked
by inside or outside
key,
• Turning key in inside
or outside cylinder.
The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.
INA-Intruder (F34) • Turning key in inside • Turning key in outside Extending the • Retracting the Cannot be locked Always unlocked
or outside cylinder, or inside cylinder, deadbolt by deadbolt by turning
• Rotating outside lever • Rotating inside turning key key in inside or
when deadbolt is lever (Retracts the in inside or outside outside cylinder,
retracted, deadbolt and latch cylinder • Rotating inside
• Rotating inside lever. simultaneously). lever (Retracts the
deadbolt and latch
simultaneously).
The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.
*S-Storeroom (F35) • Rotating inside lever, Turning key in inside or Placing locking toggle Turning key in outside Extending the deadbolt Retracting the deadbolt
• Rotating outside lever outside cylinder in locked position cylinder or inside
only when locking cylinder and placing
toggle is in unlocked locking toggle in
position and deadbolt unlocked position
is retracted,
• Turning key in inside
or outside cylinder.
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code®. In an emergency exit situation, failure to quickly
unlock the inside lever could be hazardous or even fatal.
16 HEAVY DUTY M
FUNCTIONS
FUNCTIONS
Function & Diag. Description Outside Lever or Knob Inside Knob/Lever
ANSI No. Latch operated by Deadbolt operated Locked by Unlocked by Locked by Unlocked by
by
Double Keyed (continued)
*W-Storeroom (F30) Turning key in inside or N/A Always locked Cannot be unlocked Alwayslocked Cannot be unlocked
outside cylinder
The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate
by master key only.
Deadlocks
AD-Deadlock (F17) N/A • Turning key in N/A N/A N/A N/A
outside cylinder
• Turning inside turn
lever.
*Function RD–the inside turn knob retracts deadbolt but will not project it. (Specify hand of door.) Only for 1 - 3/4” doors.
IYD-Deadlock (F18) N/A Turning key in outside N/A N/A N/A N/A
cylinder only
WD-Deadlock (F16) N/A Turning key in outside N/A N/A N/A N/A
or inside cylinder
The latchbolt is deadlocked with an auxiliary deadlatch. When required, inside cylinder may be combinated to operate by master key only.
Special
XR-Classroom • Rotating inside lever, N/A N/A N/A Cannot be locked Always unlocked
• Turning key in outside
cylinder.
*XRHB-Classroom • Rotating inside N/A N/A N/A Cannot be locked Always unlocked
Holdback lever,
•Turning key in outside
cylinder.
• Latchbolt held
retracted by turning
O/S key while holding
up I/S lever
The latchbolt is deadlocked with an auxiliary deadlatch
*ZD-Storeroom Turning key in outside N/A Always locked Cannot be unlocked N/A N/A
cylinder
ORTISE LOCKS 17
48H/49H SPECIFICATIONS
Function & Diag. Deadbolt operated by: Function & Diag. Deadbolt operated by:
BHMA# BHMA#
*K-Cylinder Deadlock • Rotating the inside thumb turn rosette, *M-Cylinder Deadlock Turning the outside or inside key
EO6071 EO6061
*L-Cylinder Deadlock Turning the outside key *R-Cylinder Deadlock • Turning the outside key,
• Rotating the inside thumb turn
cylinder assembly retracts the deadbolt, but will
not project it.
EO6081 EO6091
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code®. In an emergency exit situation, failure to quickly retract
the deadbolt could be hazardous or even fatal.
NOTE: Specify the hand of door when ordering. The R function deadlock can only be used on 1 3/4” thick doors.
HOW TO ORDER
**Must specify key mark and number of keys or designate L/C for less core.
18 HEAVY DUTY M
STD. MORTISE CYLINDER
STANDARD MORTISE CYLINDER
Standard 1E74 Mortise Cylinder
Designed for standard security applications, BEST® offers the 45H/48H mortise
locksets, utilizing the 1E74 mortise cylinder and special interchangeable core.
Special cylinder variations are available for most applications. Stanley/Best cylinders
are machined from solid brass or bronze bar stock. Additional security is provided by
a set screw that mounts diagonally into the cylinder wall. This set screw prevents
unauthorized removal of the cylinder without use of the control key.
1E74 Cylinder Specifications
Diameter: 1 5/32”. 1.150-32 (NS-2A) threaded mortise cylinder.
Length: 1 1/4”
Material: Brass or bronze. 1E74
Finish: Supplied to match mortise lockset trim (see specifications, page 3). Standard Mortise Cylinder
Cylinder Ring: Wrench resistant ring with tension spring, machined from all brass or bronze.
Proper length automatically provided with lockset. For more ring information see cylinder catalog.
Cam: Proper cam provided for cylinder as required by designated function on order. Special cams available; see cylinder catalog section.
1E7J4
High Security Cylinder
ORTISE LOCKS 19
MORTISE LOCKSETS
Stanley Security Solutions, a business division of Stanley Black & Decker, is a provider of integrated access control and security solutions for institutional,
commercial and industrial businesses and organizations. Stanley Security Solutions delivers a comprehensive suite of security products, software and
integrated systems with a strong emphasis on service. Stanley Security Solutions is committed to extending its position as a leading comprehensive
resource for a broad and extensive array of solutions that span the entire security spectrum.
FEATURES
• Quick, economical rekeying with the BEST® interchangeable core.
• Knobs machined from brass or bronze bar stock.*
• Rotating knob face provides for easy hand of door change without
removing the knob.
• No keeper hole on keyed knobs for added security.
• Keyed knob removable only after the core is removed.
• The tactile or knurled knob feature designed for blind, safety and
accessibility applications.
• Friction insert inside rose resists loosening.
• The optional breakaway feature prevents the lockset from being .
overpowered by a wrench.
• 9⁄16” throw, deadlocking latch.
8K Heavy Duty Cylindrical
• Spin free knob feature permits the lock to be operated only by use of a key.
• Steel retractor with low friction bearings for smooth, wear resistant
operation.
• Long bearing length in chassis for smooth, wear resistant operation.
* All knob styles feature solid extruded knob material.
CERTIFICATION
The 8K Cylindrical Lock meets or exceeds the following standards:
• Builders Hardware Manufacturers Association: 8K series – Listed by BHMA for
A156.2, Series 4000, Grade 1.
• Underwriters Laboratories®: 8K series – Listed by Underwriters Laboratories for
use on 3 Hr, A label for single or double swinging doors.
• California State Fire Marshal: 8K series – Listed with California State Fire Marshal.
2 H E AV Y DUTY
SPECIFICATIONS
SPECIFICATIONS
Materials: Internal parts are brass or corrosion-treated steel.
Chassis: 2 1⁄16” diameter to fit 2 1⁄8” hole in door.
Backset: 2 3⁄4” standard, 3 3⁄4” and 5” available.
Latch: 9⁄16” throw. Front 2 1⁄4 x 11⁄8” beveled. Latch housing fits 1” hole in edge of door.
Knobs: Diameter– 2 1⁄8” ; Projection from door– 2 7⁄8” #4, #6 Knob Material - Machined from solid brass or bronze.
Roses: All roses are brass or bronze reinforced with steel liner. Roses are threaded to chassis. “A”– round, 3 3⁄8” diameter; “C”– round,
2 9⁄16” diameter; “D”– convex round, 3 3⁄8” diameter “E”– special trim for 2 1⁄8” to 3” thick doors
Door Thickness: Adjustable from 1 3⁄8” to 2” standard. Special “E” trim for 2 1⁄8” to 3” doors available. The “B” style square trim is for
doors 1 3⁄4” to 2” only.
Strike:
(STK) – 2 3⁄4” x 1 1⁄8” with curved lip and box standard (ANSI A115.3)
(S3) – 4 7⁄8” x 1 1⁄4” with curved lip and box available (ANSI A115.2)
(S3-7⁄8) – Conforms to ANSI A115.2 for 1 3⁄4” doors.(4 7⁄8” x 1 7⁄8” flat)
Latch & Strike Screws:
(STK) Strike Package – (1) 2 3⁄4” Strike plate, (4) #8-32 / #8-16 x 3⁄4” Phillips flat head screws.
8KS3 Strike Package –(1) 4 7⁄8” Strike plate, (2) #8-32 / #8-16 x 3⁄4” Phillips flat head screws, (2) #12-24 / #12-12 x 3⁄4” Phillips flat head
screws. Security head machine screws and driver can be ordered for added security.
Finish: 605– bright brass, clear coated; 606– satin brass, clear coated; 611– bright bronze, clear coated; 612– satin bronze, clear coated;
613– oxidized satin bronze, oil rubbed; 625– bright chromium plated; 626– satin chromium plated; 690– dark bronze coated
HOW TO ORDER
HOW TO ORDER
8K 3 7 AB 4 A STK 626
Series Backset Core Function Knob Rose Strike Finishes Options
Housing Code Style Style Package
8K 3 – 2 3/4” 0– keyless AB– entrance 4– round A– 3 3/8” STK– standard 605 606 BRK – breakaway (#4, #6)
4 – 3 3/4” 7– 7-pin D– storeroom 6– tulip C– 2 9/16” S3– ANSI 611 612 KNL – knurled (#6 knob)
5 – 5” housing L– privacy D– convex S3– 7/8” flat 613 625 LL – lead lined
accepts N– passage E– thick strike 626 690 SH – security head screws
all BEST® R– classroom (not shown) SPN– spin free (D&W
cores etc. split function)(#4, #6 knobs)
finish is TAC – tactile knob (#4, #6)
available Note: specify inside ( l ),
outside (O), or both (B)
for KNL, TAC options
3/4 – 3/4” throw latch
see pages 8–11 see page 3 see page 3 see page 5 see page 4
** Must specify key mark and number of keys or designate L/C for less core.
8KS2 Strike (Standard)
SHIPPING WEIGHTS
SHIPPING WEIGHTS
The chart below gives the approximate shipping weight for standard functions of 8K lockset. This weight includes the weight of the lockset
with the #4 style knob, “A” style rose, latch, strike package, and box. Listed separately are the approximate weights for “with core” and
“less core” shipments.
Lock Case Shipping Shipping
Function Quantity Weight Weight
Nomenclature With core Less Core
Y 12 36 lbs 36 lbs.
N 12 44 lbs. 44 lbs.
L,P 12 47 lbs. 47 lbs.
AB,D,E,H,HJ,R,T 12 49 lbs. 47 lbs.
C,G,S,W 12 55 lbs. 51 lbs.
LO C K S - KNOBS 3
KNOB STYLES & TRIM
4 H E AV Y DUTY
SPECIAL FEATURES
SPECIAL FEATURES
LO C K S - KNOBS 5
SPECIAL FUNCTIONS
FUNCTIONS
Service Station • Rotating the inside knob, • Pushing the inside button, • Turning the key in the Cannot be locked Always unlocked
E • Rotating the outside knob only • Pushing and turning the outside knob,
F92 when the inside slotted push inside slotted button • Rotating the inside knob,
button is out (Turning the button keeps • Closing the door-(only when
• Turning the key in the outside the outside knob locked the button is not turned, this
until button is turned back knob until button is turned back applies for each operation)
and released)
Hotel Guest Room • Rotating the inside Always locked • Key block feature is Cannot be locked Always unlocked
H knob, released by:
F93 • Turning the key in the outside • Rotating the inside knob,
knob- only when the inside • Closing the door
• Push button is out, • Removing the core with
• Removing the core with a a control key and using a
control key and using a special special emergency key
emergency key
NOTE: Pushing the inside button projects an “occupied” indicator in the outside knob and blocks all operating keys.
Hotel Guest Room • Rotating the inside Always locked • Key block feature is Cannot be locked Always unlocked
HJ knob, released by:
• Turning the key in the outside • Rotating the inside knob,
knob-only when the inside push • Closing the door
button is out,
• Removing the core with a
control key and using a special
emergency key
NOTE: Pushing the inside button blocks all operating keys, but no “occupied” indicator is projected.
Classroom • Rotating the inside knob, • Turning the key in the • Turning the key in the outside Cannot be locked Always unlocked
R • Turning the key in the outside outside knob knob
F84 knob,
• Rotating the outside knob when
not locked by key
Dormitory • Rotating the inside • Turning the key in the • Turning the key in the Cannot be locked Always unlocked
T knob, outside knob, outside knob,
F90 • Rotating the outside knob when • Pushing the button on the • Rotating the inside knob
not locked by key or push button inside knob (only when locked by push
button),
• Closing the door (only when
locked by push button)
Double Keyed*
Apartment* • Rotating the inside Turning the key in the inside Turning the key in the inside Cannot be locked Always unlocked
C knob, knob knob
F88 • Rotating the outside knob
when not locked by inside key,
• Turning the key in the outside
knob
Store lock* • Rotating the outside knob when • Turning the key in the inside • Turning the key in the inside • Turning the key in • Turning the key in
G not locked by key knob, knob, the inside knob, the inside knob,
F91 • Rotating the inside knob • Turning the key in the • Turning the key in the outside • Turning the key • Turning the key
when not locked by key outside knob knob in the outside knob in the outside knob
NOTE: Turning the key in either the inside OR the outside, locks or unlocks both sides
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside knob could be hazardous or even fatal.
6 H E AV Y DUTY
SPECIAL FUNCTIONS
FUNCTIONS
Function & Diag. Description Outside Lever Inside Lever
(ANSI No.) Latch operated by Locked by Unlocked by Locked by Unlocked by
Communicating * • Turning the key in the inside knob, Turning the key in the outside Turning the key in the outside Turning the key in Turning the key in the
S • Turning the key in the outside knob knob the inside knob inside knob
F80 knob,
• Rotating the inside or outside
knob (if unlocked)
NOTE: Turning the key in either knob, locks or unlocks its own knob independently.
Institutional * • Turning the key in the inside knob, Always locked Cannot be unlocked Always locked Cannot be unlocked
W • Turning the key in the outside
F87 knob
Keyless
Privacy • Rotating the inside knob, Pushing the inside button • Rotating the outside Cannot be locked Always unlocked
L • Rotating the outside knob only slotted button,
F76 when the inside push button is out • Rotating the inside knob,
• Closing the door
Passage • Rotating the inside knob, Cannot be unlocked Always unlocked Cannot be locked Always unlocked
N • Rotating the outside knob
F75
Exit Turning the inside knob Always locked Cannot be unlocked Cannot be locked Always unlocked
NX
F89
Patio • Rotating the inside knob, • Pushing the inside button Rotating the inside knob Cannot be locked Always unlocked
P • Rotating the outside knob- only • Closing the door
F77 when the inside push button is out
Single Dummy Trim This is a single, surface-mounted knob for an inactive door or a non-latching door
1DT
Double Dummy Trim This is a through-bolt mounted pair of matching knobs for an inactive door or a non-latching door
2DT
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside knob could be hazardous or even fatal.
LO C K S - KNOBS 7
SPECIAL FUNCTIONS
SPECIAL FUNCTIONS
NOTE: Locks are powered by 24 Volts DC and 0.18 Amps, continuous duty.
Electrically • Rotating the inside knob, Switching off 24 Volts DC Applying 24 Volts DC; the Cannot be locked Always unlocked
Unlocked • Rotating the outside knob outside knob remains
DEU only when power is on, unlocked only while power
• Turning the key in the outside is on
knob
NOTE: Locks are powered by 24 Volts DC and 0.18 Amps, continuous duty.
Special functions
Dormitory or Storeroom • Rotating the inside Turning the inside button Turning the inside button Cannot be locked Always unlocked
A knob,
F81 • Rotating the outside knob only
when inside turn button is in
unlocked position,
• Turning the key in the outside
knob
NOTE: Turn button must be manually rotated to unlock the outside knob.
Office • Rotating the inside knob, • Pushing the inside button Turning the key in the Cannot be locked Always unlocked
B • Rotating the outside knob only outside knob,
F82 when inside push button is • Rotating the inside knob
out,
• Turning the key in the outside
knob
NOTE: Push button is released by turning the key in the outside knob, OR rotating the inside knob. Closing the door does not release the push
button.
Closet or Storeroom • Turning the key in the outside Always locked Cannot be unlocked Closet turn knob Closet turn knob
DZ knob, cannot be locked always unlocked
• Turning the inside closet turn
knob
Entrance or • Rotating the inside knob, • Pushing inside button, • Turning the key in the Cannot be locked Always unlocked
Office • Rotating the outside knob only • Pushing and turning the outside knob*,
EA when inside push button is inside button (Turning slotted • Rotating the inside knob*,
out, button keeps the outside • Closing the door*
• Turning the key in the outside knob locked until the butoon
knob is turned back
*Only when slotted button depressed and not turned.
Closet or Storeroom • Turning the key in the outside Turning the key in the outside Turning the key in the outside Closet turn knob Closet turn knob
RZ knob, knob knob cannot be locked always unlocked
• Turning the inside closet turn
knob,
• Turning the outside knob when
unlocked by key
Special* • Turning the key in the inside knob Always locked Cannot be unlocked Always locked Cannot be unlocked
XD
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside knob could be hazardous or even fatal.
8 H E AV Y DUTY
SPECIAL FUNCTIONS
SPECIAL FUNCTIONS
Exit* • Turning the key in the inside knob N/A N/A Always unlocked Cannot be unlocked
YD
Special* • Turning the key in the inside N/A N/A Turning the key in Turning the key in the
YR knob, the inside knob inside knob
• Rotating the inside knob when
not locked by key
Special * • Rotating the inside knob when Always locked Cannot be unlocked Turning the key in Turning the key in the
DR unlocked by inside key, the inside knob inside knob
• Turning the key in the outside
knob,
• Turning the key in the inside knob
Special * • Rotating the outside knob Turning the key in the outside Turning the key in the outside Always locked Cannot be unlocked
RD • Turning the key in the outside knob knob
knob,
• Turning the key in the inside knob
Hospital Privacy • Rotating the inside knob, Pushing the inside push • Turning the turn button in the Cannot be locked Always unlocked
LL • Rotating the outside knob only button outside knob,
when the inside push button is • Rotating the inside knob,
out • Closing the door
Communicating* • Rotating the inside knob only Turning the inside turn button Turning the inside turn button Turning the outside Turning the outside
M when the outside turn button is turn button turn button
F78 in the unlocked position,
• Rotating the outside knob only
when inside turn button is in the
unlocked position
NOTE: Do not use this function for rooms that have no other entrance.
Exit • Rotating the inside knob, Turning the inside turn button Turning the inside turn button Cannot be locked Always unlocked
Q • Rotating the outside knob only
F83 when the inside turn button is in
the unlocked position
Closet • Rotating the outside knob, Cannot be locked Always unlocked Closet turn knob Closet turn knob is
Z • Turning the inside closet turn cannot be locked always unlocked
knob
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside knob could be hazardous or even fatal.
LO C K S - KNOBS 9
CORMAX™
CORMAX is the upgrade path for existing BEST Standard, Premium, and MX8 customers; and
it is an essential element of non-residential access control as security administrators strive to
eliminate the unauthorized duplication of keys.
CORMAX™
CORMAX offers the following features and benefits: Patented Keying System
• A long-term US utility patent that guarantees the extended useful life of the system through 2027.
• A second, independent locking mechanism that utilizes a patented set of built-in side pins to provide higher security.
• Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature.
• CORMAX cores and keys are available exclusively through Stanley sales offices. Key blanks are only sold to individuals authorized by the
customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer’s facility.
• CORMAX cores are certified to meet the security, safety, and reliability requirements of BHMA A156.5 Grade 1.
• Picking and drilling resistance options are available if higher levels of security are desired.
• Complete factory masterkeying service offered, and at no charge with purchase of BEST locksets and PHI exit devices.
• Keyways are organized in families of four keyways each, with double-milled and quad-milled key levels to facilitate the design of
masterkey systems in multi-building campuses.
• BEST CORMAX cores are compatible with all existing BEST interchangeable core housings, eliminating the need for new or
modified locksets.
DEADLOCKING LATCHES & STRIKES
10 H E AV Y DUTY
DOOR PREPARATION
DOOR PREPARATION
1 1/8” CL
2 3/4” 1 1/4”
1 1/8”
1 1/4”
2 1/ 4” 1 1/4”
CL
2 1/8” 3 3/8”
4 7/8” 1 1/2”
2 3/4”
CL
1” Dia.
Beveled 1/8” in 2” face.
SAMPLE SPECIFICATIONS
SAMPLE SPECIFICATIONS – ACCEPTABLE MANUFACTURERS
A. Locksets and Latchsets
Stanley/Best - No Substitution.
1. Locksets must be extra heavy-duty cylindrical type with 2 3/4 inch backset, or greater as specified, with a 9/16 inch throw latchbolt.
2. Provide locksets with BEST® 7-pin interchangeable core.
3. Locksets and latchsets must conform to ANSI A156.2, Series 4000, Grade 1, and be UL listed.
4. Locksets and cores to be of the same manufacturer to maintain complete lockset warranty.
5. Locksets must be available with tactile or abrasive lever for identification of hazardous areas.
6. Locks to have solid shank with no opening for access to keyed lever keeper.
7. Keyed lever to be removable only after core is removed, by authorized control key, to allow access to lever “keeper”.
8. Permanent core face must be the same finish as the lockset finish.
9. Levers must have a minimum wall thickness of .060.
B.All cylinders shall be Best 7-pin, interchangeable core and keyed into a [new] [existing] factory registered Grand Master Key System with
a restricted keyway.
C.Permanent keys and cores shall be stamped with the applicable key mark for identification.
These visual key control marks or codes will not include the actual key cuts. Permanent keys will also be stamped [“Do Not Duplicate”.]
[“U.S. Gov.-Do Not Duplicate”.] [_________________________]
D.Grand Masterkeys, Masterkeys and other Security Keys shall be transmitted to the Owner by U.P.S., delivery confirmation requested.
F. Computer key and core control software Stanley/Best Keystone® 600N5 will be provided and registered to the owner by the local Stanley
Security Solutions office. The owner will furnish compatible hardware to operate the key and core control program. The Stanley/Best
office will provide initial training on computer key and core control as well as on-going support including software updates.
LO C K S - KNOBS 11
HEAVY DUTY CYLINDRICAL LOCKS – SERVICE EQUIPMENT
SERVICE EQUIPMENT
KD304A Boring Jig Kit
The KD304A jig kit is made for boring cut-outs in wooden doors for
Fed. Spec. 160 and 161 series cylindrical/tubular locksets, doors
1 3/8” to 2 1⁄4” thick. The KD304A kit includes the boring jig (to drill
wood doors for 2 3/8”, 2 3⁄4”, 3 3⁄4”, and 5” backsets), a quick-release
adaptor for 3/8” drill chuck, a 2 1⁄8” bit,
and a 1” diameter x 9” bit.
KD312 and KD315 Face Plate Marking Chisel and KD325 Strike
Plate Location Pin
The KD315 face plate marking chisel (which locates the mortising
for the faceplate) and the KD325 strike locating pin (which centers
the strike for proper installation) and is used for Fed. Spec. 161
cylindrical lockset, (1 1⁄8” x 2 1⁄8”), and BEST® series 82T & 83T
tubular locks. The KD312 face plate marking chisel is available for
Fed. Spec. 160 (1” x 2 1⁄4” ) preparation.
To order specify:
KD312– face plate marking chisel 1” (160) KD315 KD325
KD315– face plate marking chisel 1 1/8” (161) (Fed. Spec. 161)
KD325– strike plate locating pin
Stanley Security Solutions, a business division of Stanley Black & Decker, is a provider of integrated access control and security solutions for institutional,
commercial and industrial businesses and organizations. Stanley Security Solutions delivers a comprehensive suite of security products, software and
integrated systems with a strong emphasis on service. Stanley Security Solutions is committed to extending its position as a leading comprehensive
resource for a broad and extensive array of solutions that span the entire security spectrum.
D-1610/D-1611 SERIES
GENERAL INFORMATION
TABLE OF CONTENTS
Page Page
General Information ..........................................................................2, 3 Top Jamb Application............................................................................6
Standard Application ............................................................................4 Installation Tips .....................................................................................7
Parallel Arm Application ......................................................................5 Accessories ............................................................................................7
INTRODUCTION
The D-1610 Series is a slim line closer uniquely designed to Adjustable Spring Power
accommodate the standard aluminum storefront application foot
print. The pinion and piston are constructed of cold forged steel D-1610 series Door Closers are
adjustable from size 2 – 5 (3lbf – 11lbf
maintaining critical tolerances for reliable performance. The non-
closing force measured at 30” from
handed cylinder body incorporates a robust cast aluminum the door pivot) The D-1611 Series
construction. Door Closers are adjustable from size
1 – 4 (2lbf – 8lbf closing force
Features measured 30” from the pivot).
Controls the door through the entire opening and closing cycles by The D-1611 Series Door Closers are
providing adjustable backcheck upon opening and adjusting designed to meet entrance SPRING ADJUSTING NUT
general and latch speeds through the closing cycle. accessibility requirements of 5lbf
opening force or less.
All Season Fluid
All season fluid eliminates the need for seasonal adjustment.
(2)
(1)
High Impact Cover (Optional)
Optional high impact self-extinguishing decorative cover is
(3) available on all Stanley D-1610 Series Closers.
Maintenance Free
Door Closers mounted in accordance with the provided
(1) closing speed range 180˚ - 10˚ installation instructions are maintenance free from periodic
(2) latching speed range 10˚ - 0˚ inspection and adjustment.
(3) backcheck action range 75˚ - 180˚
Through Bolts and Sex Nuts
Non-Handed
When through bolting is ordered, factory will furnish sex nuts
Can be used on RH and LH doors for both push side and pull
for use with the machine screws furnished with the closer.
side mounting.
Nuts are sized to accommodate 1-3/8" or 1-3/4" thick doors.
Non-Critical Regulation
The separate adjustments for backcheck, general and latch speeds Closing Power Adjustment
are equipped with non-critical “V-Slot” regulating valves which The D-1610 Series Door Closers have the provision to adjust the
allow for fine tuning the closing and latching speeds as well as the leverage of the arms by changing the pivot position of the arm in
backcheck intensity. the foot; thus the closing force at the latch can be increased or
decreased.
Packing
All D-1610 Series Door Closers with standard arm sets are packed
for mounting on standard, parallel arm or top jamb applications.
All closer assemblies are packed 10 per carton. Tracks for track
mounted closers are packed separately.
ANSI/BHMA Specifications
The D-1610 Series Door Closers has
been Certified ANSI/BHMA A156.4
Grade 1, UL10C.
Arm Options
Handing
SuffixDescription Page
L Long Rod Forearm (Top Jams only) 9
PULL SIDE PULL SIDE
H Standard Hold Open 4
PUSH SIDE PUSH SIDE PH Parallel Hold Open 5
LEFT HAND DOOR RIGHT HAND DOOR
GENERAL INFORMATION
Spring
Adjustment
Cap
Piston -
Heat treated steel
Internal springs – Piston body –
Internal springs cold forged
enable wide range of heavy steel
power adjustment. construction
Pinion shaft – (1 1/2" dia.)
Internal springs - cold forged construction
Wide range spring ( 5/8" teeth) Pinion shaft -
power adjustment. Heat treated steel
HOW TO ORDER
HOW TO ORDER
D-161 0 PH FC 689 SN
Model No. Size Arm Cover Finishes Fasteners
Type
D-161 1– size 1-4 L– Long Rod Forearm (TJ only) FC – Option 689 SN – Sex Nuts &
0– size 2-5 H – Standard Hold Open Full Cover 690 Bolts Wood &
PH – Parallel Hold Open 691 Machine Screws
693 furnished standard
(Tri-Pack Standard) 695 SEC – Security
696 Screws
FRAME
DOOR
OF HINGE PIVOT
#10-32 Machine Screw
A O 5 Tapping Screw
1-1/2" FRAME
HINGE EDGE OF DOOR
5/8"
COVER
2-5/8"
3/4"
7/8"
DOOR
B 2"
9-1/16"
2-1/16"
9-11/16"
DOOR
A 3" #10-32 Machine Screw
O 5 Tapping Screw
9/32"
1-9/16"
FRAME
13/32"
OF HINGE PIVOT
FRAME
3"
2-5/8"
3/4"
B 9-1/16" 2"
9-11/16" 2-1/16"
DOOR
2"
2-1/16" FRAME
9-1/16"
A
9-11/16"
COVER
2-5/8"
INSTALLATION TIPS
Power Adjustment Chart
Max. Door Width Turns of Spring Adjusting Screw
D-1610 D-1611
From preset From minimum From preset From minimum
ACCESSORIES
ACCESSORIES
10-1/16" 10-1/16"
1-1
1-1
/2"
/2"
Full Cover (Optional) C-165 Plastic Standard Arm with Long Rod and Shoe Set A16-401L
used on Reveals 3-1/2" – 8"
10-7/8"
3-13/16"
13-1/32"
2-7/16"
1-1
/2"
For more information on Stanley Security Solutions’ products, services, and office locations visit our web site at www.stanleysecuritysolutions.com
Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible. Errors or mistakes
may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or which may be subject to
changes or modifications by the manufacturer without notice and without obligation. Therefore, no guarantee can be made or should be assumed or implied with
regards to product information contained in this catalog.
TABLE OF CONTENTS
WIDE STILE EXIT DEVICES & TRIMS Page ACCESSORIES Page
Rim Devices ..................................................................4, 5 ALK Exit Alarm Kit ..........................................................27
Surface Vertical Rod Devices ........................................6, 7 CDK Cylinder Dogging Kit ..............................................19
Mortise Devices ............................................................8, 9 E Electric Lock/Unlock Kit................................................28
Wood Door Concealed Vertical Rod Devices ............14, 15 ELR Conversion Kit ........................................................21
Concealed Vertical Rod Devices ..............................16, 17 ELR150 Power Supply and Modules..........................21,22
LSK Latchbolt Monitoring Conversion Kit........................29
NARROW STILE EXIT DEVICES & TRIMS
PS160-6 Power Supply....................................................25
Rim Devices ..............................................................10, 11
TSK Touchbar Monitoring Conversion Kit........................29
Concealed Vertical Rod Devices ..............................12, 13
Cylinders ..........................................................................19
MULLIONS Double Cylinders Conversion Kit ....................................19
Removable Mullion ..........................................................18 Sex Nuts & Bolts................................................................3
Fire Labeled Removable Mullion ....................................18 Strikes ..............................................................................34
Key Removable Mullion ..................................................18
MISCELLANEOUS COMPONENTS
EXIT DEVICE OPTIONS Braille Touchbar ..............................................................35
ALK Exit Alarm (Battery Operated) ................................27 Dummy Touchbar ............................................................35
ALW Exit Alarm (Remote Power) ....................................27 End Cap & Mounting Bracket ..........................................35
BRL Braille Touchbar ......................................................35 Dogging Key & Rod Guide ..............................................35
CD Cylinder Dogging ......................................................19 Fire Bolt Assembly ..........................................................35
DE Delayed Egress ..................................................24, 25 Power Transfers ..............................................................35
DS Door Position Switch..................................................29 Security Screws ..............................................................35
E Electric Rim & Mortise Devices ....................................28 Shim Kit............................................................................35
ELR Electric Latch Retraction ............................21, 22, 23 Top Rod & Bottom Rod lengths ......................................35
HC Windstorm and Hurricane Code Devices ..................20
ADDITION INFORMATION
LD Less Dogging ............................................................19
Introduction ........................................................................2
LS Latchbolt Monitoring ..................................................29
Base Material and Finishes ..............................................3
LDS Latchbolt Monitoring Double Switch ........................29
DE Application Charts......................................................26
Q Wireless Access Management System ..................30-32
Device Dimensions ..........................................................37
TS Touchbar Monitoring ..................................................29
Device Minimum Stile Width......................................36, 37
TDS Touchbar Monitoring Double Switch ........................29
ELR application Charts ....................................................23
WALW Weatherized Exit Alarm (Remote Power)............27
Fasteners ..........................................................................3
WTS Weatherized Touchbar Monitoring ..........................29
Fire Label Rating Chart....................................................33
WTDS Weatherized Touchbar Mon. Double Switch ........29
Quiet Operation..................................................................2
Double Cylinder ................................................................9
Touchbar Clearance ..........................................................2
Electric Mortise Lock........................................................28
Trim Dimensions ..............................................................38
The Apex 2000 Series Touchbar Style Exit Device is highly The Apex Wide Stile Series Exit Devices accommodate doors
regarded by architects and end-users alike. Many of the nation’s with vision lites or glass windows where the vision lite frames
largest healthcare and educational facilities prefer the Apex for or moldings project up to 1/4 beyond the face of the door. The
it’s aesthetic design and efficient engineering. All Apex 2000 Active Case and End Cap Mounting Bracket are mounted on the
Series Exit Devices are UL listed for panic and fire hardware face of the door without shims or without cutting the glass mold-
and are certified to ANSI A156.3 Grade 1. Several models are ing. These devices have a 1/4" gap between the face of the door
also certified for hurricane resistant applications. and the Touchbar Assembly. This gap allows proper functioning
of the devices even on doors which are not perfectly flat. Since
A complete offering of mechanical and electrical options provide
the Active Case is mounted directly on the face of the door, it
a wide range of exit device security solutions. However, the
accommodates standard lengths of through bolting screws,
traditional core strenghts of the product can’t be overstated.
thumbpieces, knob & lever Trim fingers, and cylinder tail pieces.
Simple operation with few moving parts, manufactured with true
ANSI/BHMA architectural finishes. The chassis is constructed
from investment cast steel and the universal mounting holes
provide an easier retrofit installation. Exit Device
Quiet Operation
Sound Dampeners reduce the noise associated with Exit Device 1/4" Gap
operation on the depression and return stroke of the Touchpad. Door (Top View)
2 APEX 2000 SE
GENERAL INFORMATION
GENERAL INFORMATION
C - Touch Bar End Caps D - Touch Bar E - Device Channel G - Device Endcap
B - Lock Side Filler F - Hinge Slide Filler H - Rods and Latch Covers
(for Surface Vertical Rod
A - Active Case Cover Devices)
Base Materials
Inside
Sex Nuts & Bolts (not furnished std.)
Sex Nuts & Bolts are
furnished with No. 10-24 LHRB Shown RHRB Shown
x 1" OHMS (1-1/2" long
screws required for
guides). 1-5/8"
Outside
RIES DEVICES 3
RIM EXIT DEVICES
S300
Standard
DOORS - For all types of single and double doors with a mullion. CYLINDERS - Rim Type, not furnished standard. Specify when
For mullions, see page 18. Available for 1-3/4" to 2-1/4" thick, required. For cylinder details see page 19.
up to 4'-0" wide opening. For thicker doors, consult factory. STILE WIDTH - See Stile Information on page 36.
Furnished standard for 1-3/4" thick, 3'-0" wide opening.
RETROFIT APPLICATIONS - The 2100 and FL2100 Series
DEVICE - Covers ANSI A115.2 (Type 161), A115.18 cylinder Devices are designed to retrofit into other manufacturers’
lock and A115.1 (Type 86) Mortise Lock preparation. mounting hole locations. 1700 Series Pull Trim and 4900
FUNCTIONS - Functions are field selectable except for the Series Lever Trim may also be factory set for these
Double Cylinder option. The device is furnished for a desired applications by specifying prefix “R” (e.g. 2108 R4908A).
function if specified. If not specified the “03” function is Consult factory for details.
furnished standard.
Apex 21 Series – Nonhanded
DOUBLE CYLINDER - Handed, “10” Function available.
The 21 Series Device is designed to be compatible with many
Requires two rim type cylinders, not furnished standard.
manufacturers’ Access Control exterior trim. The device incor-
See page 5 and 19.
porates a center driven cam to receive the tailpiece of the
BASE MATERIAL - The Cover, Touchbar, Device Channel, access control product. The tailpiece rotation required to
Lock/Hinge Side Filler and End Cap are furnished of heavy retract the latch is a minimum of 50 degrees.
wrought Brass, Bronze or Stainless Steel. 628 Devices are Consult factory for details.
furnished with Aluminum, Brass, Bronze and Stainless Steel
DEVICE OPTIONS
components. See “Finish & Base Material” chart page 3.
Prefix Description Page
CHASSIS - Investment Cast Steel, Zinc Dichromated. DE Delayed Egress ..................................................24
LATCHBOLT - Stainless Steel, Deadlocking, 3/4" throw. E Electric Device ....................................................28
ELR Electric Latch Retraction ....................................21
STRIKES - No. S300, Investment Cast Stainless Steel, Black FL Fire Exit Hardware ................................................4
Powder Coated furnished standard. No. S988, optional strike HC Windstorm and Hurricane Code Device .............20
for use on Aluminum Door applications, please specify when LDS Latchbolt Monitoring Double Switch ...................29
ordering. No. S458, optional strike for use on Mullion applica- LS Latchbolt Monitoring Switch ................................29
tions, please specify when ordering. Q Wireless Access Management System..........30-32
For optional strike information see page 34. TDS Touchbar Monitoring Double Switch....................29
DOGGING - 1/4" turn hex key dogging standard. NOT available TS Touchbar Monitoring Switch ................................29
on Fire Exit Hardware. WTDS Weatherized Touchbar Mon. Dbl. Switch ............29
WTS Weatherized Touchbar Monitoring Switch ..........29
TOUCHBAR HEIGHT - 39-15/16" from floor standard. May be
To specify add Prefix to Device No. (e.g. TS2103)
varied as situation dictates.
REVERSIBLE - Reversible for all functions and Trims. Suffix Description Page
Standard packaging RHRB. ALK Exit Alarm: battery operated................................27
ALW Exit Alarm: remote power....................................27
UL LISTED - Panic and Fire Exit Hardware. For FIRE EXIT BRL Braille Touchbar ..................................................35
HARDWARE Ratings see page 33. Conforms to UL10C and
CD Cylinder Dogging ................................................19
UBC 7-2.
DS Door Position Monitoring Switch ........................29
ANSI/BHMA - Devices are BHMA certified for ANSI 156.3, LD Less Dogging ......................................................19
Grade 1. SEC Security Screws ....................................................3
FINISHES - 605, 606, 612, 613, 625, 628, 630. SNB Sex Nut and Bolt ..................................................3
For Finish description see page 3. WALW Weatherized Exit Alarm: remote power ..............27
To specify add Suffix to Device No. (e.g. 2103CD)
4 APEX 2000 SE
TRIMS
TRIMS
1700A 1700B 1700C 2000C
“A” Grip “B” Grip “C” Grip “C” Grip 1. All Trims are furnished with wrought plates
and extruded or cast solid grips.
2. Specify Grip Design (A,B,C) (“A” Grip
furnished standard for 1700 Series Trim, “C”
Grip furnished standard for 2000 Series Trim)
3. 630 Trim is furnished for 628 Devices.
Retrofit Applications
The R1700 Series Trim is designed to retrofit
into other manufacturers’ installations when
used with the wide stile Apex Series Devices.
Consult factory for details.
RIES DEVICES 5
SURFACE VERTICAL ROD EXIT DEVICES
BOTTOM BOLT - Steel plated, independent action 5/8" Apex 22 Series - Reversible
throw, with adjustment range to suit 3/4" door undercut. The 22 Series Device is designed to be compatible with
TOP STRIKE - No. S300 Surface applied, Investment many manufacturers’ Access Control exterior trim. The
Cast Stainless Steel, Black Powder Coated furnished device incorporates a center driven cam to receive the
standard. For optional strikes see page 34. tailpiece of the access control product. The tailpiece
rotation required to retract the latch is a minimum of 50
BOTTOM STRIKE - No. S460, Flush mounted, Steel,
degrees.
Black Powder Coated.
Consult factory for details.
DOGGING - 1/4" turn hex key dogging standard. NOT
available on Fire Exit Hardware.
TOUCHBAR HEIGHT - 39-15/16" from floor standard.
Specify required height if other than standard.
DEVICE OPTIONS
Prefix Description ....................................................Page Suffix Description Page
DE* Delayed Egress....................................................24 ALK Exit Alarm: battery operated ............................27
E Electric Device......................................................28 ALW Exit Alarm: remote power ................................27
ELR Electric Latch Retraction......................................21 BRL Braille Touchbar................................................35
FL Fire Exit Hardware..................................................6 CD Cylinder Dogging..............................................19
HC Windstorm and Hurricane Code Device ............20 DS Door Position Monitoring Switch ....................29
LS Latchbolt Monitoring Switch ................................29 LBR Less Bottom Rod................................................6
Q Wireless Access Management System ..30-32 LD Less Dogging ............................................19
TDS Touchbar Monitoring Double Switch ..................29 SEC Security Screws..................................................3
TS Touchbar Monitoring Switch ................................29 SNB Sex Nut and Bolt ................................................3
WTDS Weatherized Touchbar Mon. Dbl Switch............29 TMB Transom Bracket ..............................................35
WTS Weatherized Touchbar Mon. Switch ..................29 WALW Weatherized Exit Alarm: remote power..........27
S460 To specify add Prefix to Device No. (e.g. TS2203) To specify add Prefix to Device No. (e.g. TS2203)
*Rod protector required - supplied by other manufacturers.
6 APEX 2000 SE
TRIMS
TRIMS
1700A 1700B 1700C 2000C
“A” Grip “B” Grip “C” Grip “C” Grip 1. All Trims are furnished with wrought plates
and extruded or cast solid grips.
2. Specify Grip Design (A,B,C) (“A” Grip
furnished standard for 1700 Series Trim, “C”
Grip furnished standard for 2000 Series Trim)
3. 630 Trim is furnished for 628 Devices.
Retrofit Applications
The R1700 Series Trim is designed to retrofit
into other manufacturers’ installations when
used with the wide stile Apex Series Devices.
Consult factory for details.
RIES DEVICES 7
MORTISE EXIT DEVICES
S982
TRIMS
1700A 1700B 1700C 2000C 1. All Trims are furnished with wrought plates
“A” Grip “B” Grip “C” Grip “C” Grip and extruded or cast solid grips.
2. Specify Grip Design (A,B,C) (“A” Grip
furnished standard for 1700 Series Trim, “C”
Grip furnished standard for 2000 Series Trim)
3. 630 Trim is furnished for 628 Devices.
NOTE: B & C grip pull handles are not available in the
05 and 15 functions.
Retrofit Applications
The R1700 Series Trim is designed to retrofit
into other manufacturers’ installations when
used with the wide stile Apex Series Devices.
Consult factory for details.
4900A 4900B 4900C 4900D 4900K V4908A
“A” Lever “B” Lever “C” Lever “D” Lever “K” Knob Vandal Resistant Trim
A heavy duty lever trim designed to with
stand abuse and vandalism. Composed of
extra strength shock-absorbing “overload”
springs and heavy duty investment cast
stainless steel internal components. Lever
returns to the “home” position eliminating the
need to reset the lever.
Retrofit Applications
1. All the escutcheons and levers are castings or forgings. The R4900 Series Trim is designed to retrofit
2. Specify Lever or Knob Design (A,B,C,D,K) and Handing into other manufacturers’ installations when
(“A” Lever x RHRB furnished standard) used with the wide stile Apex Series
3. 626 Trim furnished for 628 and 630 Devices.
Devices.Consult factory for details.
4. All Lever Trims, M4908K and M4914K are Handed, Specify Hand.
• For Trim dimensions see page 38.
• Trims are BHMA certified for ANSI 156.3, Grade 1.
• Trims are through bolted and will cover 161 and 86 cutouts (except for 2000C Trim).
• Cylinder 1-1/4" long Mortise Type, not furnished standard. For cylinder details see page 19.
ANSI 01 02 03 05 08 10* 14 15
Function Exit Only Dummy Key Key Key Double Cylinder No Cylinder No Cylinder
(cover plate) Trim Retracts Locks/Unlocks Locks/Unlocks Inside Key Lever/Knob Thumbpiece
Latchbolt Thumbpiece Lever/Knob Locks/Unlocks Always Active Always
Lever/Knob Active
Device 2301 2302 2303** 2305 2308 2310 2314 2315
Nos. FL2301 FL2303** FL2305 FL2308 FL2310 FL2314 FL2315
Trim 1701 1702A 1703A M1705A M4908A M4908A M4914A M1715A
Nos. R1701 R1702A R1703A RM1705A VM4908A VM4908A RM4914A RM1715A
2001 2002C 2003C RM4908A RM4908A
4901 4902A 4903A VRM4908A VRM4908A
R4901 R4902A R4903A
RIES DEVICES 9
NARROW RIM EXIT DEVICES
S988
For (single)
aluminum
door
applications.
S458
For (paired) mullion
applicaions.
DOORS - For all types of single and double doors with a FINISHES - 605, 606, 612, 613, 625, 628, 630. For finish
mullion. For mullions, see page 18. Available for 1-3/4" to description see page 3.
2-1/4" thick, up to 4'-0" wide opening. For thicker door,
CYLINDERS - Rim type for “03” function, Mortise type for
consult factory. Furnished standard for 1-3/4" thick, 3'-0"
“08” function. Use 1-1/4" long standard mortise cylinder.
wide opening.
Cylinders are not furnished standard. Specify when
FUNCTIONS - A universal exit device. Add trim for desired required. For cylinder details see page 19.
function. STILE WIDTH - See Stile Information on page 37.
BASE MATERIAL - The Cover, Touchbar, Device Channel,
Lock/Hinge Side Filler and End Cap are furnished of heavy
wrought brass, bronze or stainless steel. US28 devices DEVICE OPTIONS
are furnished with aluminum, brass, bronze and stainless Prefix Description Page
steel components. See “Finish & Base Material” chart on DE Delayed Egress ..................................................24
page 3. ELR Electric Latch Retraction ....................................21
CHASSIS - Investment cast steel, zinc dichromated. FL Fire Exit Hardware ..............................................10
TDS Touchbar Monitoring Double Switch....................29
LATCHBOLT - Stainless steel, deadlocking, 3/4" throw. TS Touchbar Monitoring Switch ................................29
STRIKES - WTDS Weatherized Touchbar Mon. Dbl. Switch ............29
No. S988, for (single) aluminum door applications, Black WTS Weatherized Touchbar Monitoring Switch ..........29
Powder Coated Stainless Steel Roller Strike. To specify add Prefix to Device No. (e.g. TS2403)
No. S458, for (paired) mullion applications, please specify
Suffix Description Page
when ordering.
For optional strike information see page 34. ALK Exit Alarm: battery operated................................27
ALW Exit Alarm: remote power ....................................27
DOGGING - 1/4" turn hex key dogging standard. BRL Braille Touchbar ..................................................35
NOT available on Fire Exit Hardware. CD Cylinder Dogging ................................................19
TOUCHBAR HEIGHT - 39-15/16" from floor standard. May DS Door Position Monitoring Switch ........................29
be varied as situation dictates. LD Less Dogging ......................................................19
SEC Security Screws ....................................................3
UL LISTED - Panic and Fire Exit Hardware. For FIRE EXIT
HARDWARE Ratings see page 33. Conforms to UL10C SNB Sex Nut and Bolt ..................................................3
and UBC 7-2. WALW Weatherized Exit Alarm: remote power ..............27
To specify add Suffix to Device No. (e.g. 2403CD)
ANSI/BHMA - Devices are BHMA certified for ANSI 156.3,
Grade 1.
10 APEX 2000 SE
TRIMS
TRIMS
2900A 2900B 2900C 2900D 2000C
“A” Lever “B” Lever “C” Lever “D” Lever “C” Grip 1. All the escutcheons and levers are castings
or forgings.
2. For Lever Trim specify Lever Design
(A, B, C, D) and Handing (“A” Lever RHRB
furnished standard).
3. For 2900 Series Trim, 626 finish is furnished
for 628 and 630 Devices.
4. 2000 Series Trim is furnished with a wrought
plate and extruded solid “C” Grip.
ANSI 01 02 03 08 14
Function Exit Only Dummy Key Key No Cylinder
(cover plate) Trim Retracts Locks/Unlocks Lever
Latchbolt Lever Always Active
Device with Trim: Add Suffix: for options, see page 10.
Device No. Add Suffix: Lever Design (A,B,C,D)
Add Prefix for options, Grip Design (C)
see page 10.
Add Suffix: “KNR” Knurled Lever (Abrasive Strip)
Device Only: Device no., hand, finish, strike, and door size including thickness:
(e.g. TS2408CD x RHRB x 630 x S988 x 3'-0" x7'-0" x 1-3/4" )
Trim Only: Trim no., hand, finish, strike, and door size including thickness: (e.g. 2908A x RHRB x 626 x 1-3/4" )
* 2403 & FL2403 x Cylinder Only Application includes Cylinder Attachment Kit “NCA-03”
RIES DEVICES 11
NARROW CONCEALED VERTICAL ROD EXIT DEVICES
DOORS - For all types of metal single and double door TOP STRIKE - No. S519 Surface applied, Investment Cast
applications. Available for 1-3/4" to 2-1/4" thick, up to Stainless Steel, Black Powder Coated.
4'-0" wide by 10'-0" high openings. For thicker doors,
consult factory. Furnished standard for 1-3/4" thick, 3'-0" BOTTOM STRIKE - No. S460, Flush mounted, Steel, Black
wide by 6'-8" to 8'-0" high openings. Powder Coated.
FUNCTIONS - A Universal Exit Device. Add Trim for DOGGING - 1/4" turn hex key dogging standard.
desired function. NOT available on Fire Exit Hardware.
BASE MATERIAL - Side Filler and End Cap are TOUCHBAR HEIGHT - 39-15/16" from floor standard.
furnished of heavy wrought Brass, Bronze or Stainless Specify required height if other than standard.
Steel. 628 Devices are furnished with Aluminum, Brass, UL LISTED - Panic and Fire Exit Hardware. For FIRE
Bronze and Stainless Steel components. See “Finish & EXIT HARDWARE Ratings see page 33. Conforms to
Base Material” chart on page 3. UL10C and UBC 7-2.
CHASSIS - Lock Stile Assembly - Investment Cast Steel, ANSI/BHMA - Devices are BHMA certified for ANSI 156.3,
Zinc Dich-romated. Grade 1.
TOP LATCHBOLT - Stainless Steel, Deadlocking, FINISHES - 605, 626, 612, 613, 625, 628, 630. For finish
3/4" throw. description see page 3.
CYLINDERS - Rim Type for “03” function, 1-1/4" Long
Note: All vertical rod lengths are based on 39 15/16” exit device
horizontal centerline.
Mortise Type for “08” function. Cylinders are not furnished
standard. Specify when required. For cylinder details see
page 19.
BOTTOM BOLT - Steel plated, independent action 5/8" STILE WIDTH - See Stile Information on page 37.
throw, with adjustment range to suit 3/4" door undercut. LESS BOTTOM ROD (LBR) OPTION - Specify suffix
CENTER CHASSIS - Steel plated, heavy wrought Steel “LBR” (e.g. 2603LBR). See UL FIRE LABEL RATING
Assembly with lock in place Top and Bottom Latch Chart on page 33. Fire Rated Devices include FB277
Adjustors. Adjustment is accessible through the door Fire Bolt Assembly. For Fire Bolt Assembly image
after installation. see page 35.
DEVICE OPTIONS
Prefix Description Page Suffix Description Page
DE Delayed Egress ................................................24 ALK Exit Alarm: battery operated ............................27
ELR Electric Latch Retraction ..................................21 ALW Exit Alarm: remote power ................................27
FL Fire Exit Hardware............................................12 BRL Braille Touchbar................................................35
TDS Touchbar Monitoring Double Switch ..............29 CD Cylinder Dogging..............................................19
TS Touchbar Monitoring Switch ............................29 DS Door Position Monitoring Switch ....................29
WTDS Weatherized Touchbar Mon. Dbl. Switch ......29 LBR Less Bottom Rod..............................................12
WTS Weatherized Touchbar Mon. Switch ..............29 LD Less Dogging ............................................19
To specify add Prefix to Device No. (e.g. TS2603) SEC Security Screws..................................................3
SNB Sex Nut and Bolt ................................................3
WALW Weatherized Exit Alarm: remote power..........27
S460 To specify add Prefix to Device No. (e.g. TS2603)
12 APEX 2000 SE
TRIMS
TRIMS
2900A 2900B 2900C 2900D
“A” Lever “B” Lever “C” Lever “D” Lever 1. All the escutcheons and levers are castings
or forgings.
2. Specify Lever Design (A, B, C, D) and
Handing (“A” Lever RHRB furnished
standard).
3. 626 finish is furnished for 628 and 630
Devices.
ANSI 01 02 03 08 14
Function Exit Only Dummy Key Key No Cylinder
(cover plate) Trim Retracts Locks/Unlocks Lever
Latchbolt Lever Always Active
Device with Trim: Add Suffix: for options, see page 12.
Device No.
Add Suffix: Lever Design (A,B,C,D)
Add Prefix for options,
see page 12. Add Suffix: “KNR” Knurled Lever (Abrasive Strip)
Device Only: Device no., hand, finish, strike, and door size including thickness:
(e.g. TS2608CD x RHRB x 630 x 3'-0" x7'-0" x 1-3/4" )
Trim Only: Trim no., hand, finish, strike, and door size including thickness: (e.g. 2908A x RHRB x 626 x 1-3/4" )
* 2603 & FL2603 x Cylinder Only Application includes Cylinder Attachment Kit “NCA-03”
RIES DEVICES 13
WOOD DOOR CONCEALED VERTICAL ROD EXIT DEVICES
S519
Apex 2700 Series - Reversible
Apex FL2700 Fire Exit Series - Reversible
DOORS - For all types of single and double door BOTTOM STRIKE - No. S460 Flush mounted, Steel, Black
applications. Available for 1-3/4" to 2-1/4" thick, up to Powder Coated.
4'-0" wide by 10'-0" high openings. For thicker doors,
consult factory. Furnished standard for 1-3/4" thick, 3'-0" DOGGING - 1/4 turn hex key dogging standard. NOT
wide by 6'-8" to 8'-0" high openings. available on Fire Exit Hardware.
FUNCTIONS - A Universal Exit Device. Add Trim for TOUCHBAR HEIGHT - 39-15/16 from floor standard.
desired function. Specify required height if other than standard.
BASE MATERIAL - Side Filler and End Cap are REVERSIBLE - Reversible for all functions and trims.
furnished of heavy wrought Brass, Bronze or Stainless Standard packaging RHRB.
Steel. 628 Devices are furnished with Aluminum, Brass, UL LISTED - Panic and Fire Exit Hardware. For FIRE EXIT
Bronze and Stainless Steel components. See “Finish & HARDWARE Ratings see page 33. Conforms to UL10C
Base Material” chart on page 3. and UBC 7-2.
CHASSIS - Lock Stile Assembly - Investment Cast Steel, ANSI/BHMA - Devices are BHMA certified for ANSI 156.3,
Zinc Dich-romated. Grade 1.
VERTICAL RODS - Steel, plated. Top Rod is adjustable FINISHES - 605, 606, 612, 613, 625, 628, 630. For finish
from 6'-8" to 8'-0" or from 8'-1" to 10'-0". Additional description see page 3.
adjustments are available through the lock front filler.
CYLINDERS - Rim Type, not furnished standard. Specify
when required. For cylinder details see page 19.
Note: All vertical rod lengths are based on 39 /16” exit device
15
horizontal centerline.
TOP LATCHBOLT - Stainless Steel, Deadlocking, 3/4" STILE WIDTH - See Stile Information on page 36.
throw. LESS BOTTOM ROD (LBR) OPTION - Specify suffix
BOTTOM BOLT - Steel plated, independent action 5/8" “LBR” (e.g. 2703LBR). See UL FIRE LABEL RATING
throw, with adjustment range to suit 3/4 door undercut. Chart on page 33. Fire Rated Devices include FB277
TOP STRIKE - No. S519 Surface applied, Investment Fire Bolt Assembly. For Fire Bolt Assembly image
Cast Stainless Steel, Black Powder Coated. see page 35.
DEVICE OPTIONS
Prefix Description Page Suffix Description Page
DE Delayed Egress....................................................24 ALK Exit Alarm: battery operated ............................27
E Electric Device......................................................28 ALW Exit Alarm: remote power ................................27
ELR Electric Latch Retraction......................................21 BRL Braille Touchbar................................................35
FL Fire Exit Hardware ..............................................14 CD Cylinder Dogging..............................................19
LS Latchbolt Monitoring Switch ................................29 DS Door Position Monitoring Switch ....................29
Q Wireless Access Management System ..30-32 LBR Less Bottom Rod..............................................14
TDS Touchbar Monitoring Double Switch ..................29 LD Less Dogging ............................................19
TS Touchbar Monitoring Switch................................29 SEC Security Screws..................................................3
WTDS Weatherized Touchbar Mon. Dbl. Switch ..........29 SNB Sex Nut and Bolt ................................................3
S460 WTS Weatherized Touchbar Mon. Switch ..................29 WALW Weatherized Exit Alarm: remote power..........27
To specify add Prefix to Device No. (e.g. TS2703) To specify add Prefix to Device No. (e.g. TS2703)
14 APEX 2000 SE
TRIMS
TRIMS
1700A 1700B 1700C 2000C
“A” Grip “B” Grip “C” Grip “C” Grip 1. All Trims are furnished with wrought plates
and extruded or cast solid grips.
2. Specify Grip Design (A,B,C) (“A” Grip
furnished standard for 1700 Series Trim, “C”
Grip furnished standard for 2000 Series Trim)
3. 630 Trim is furnished for 628 Devices.
ANSI 01 02 03 05 08 14 15
Function Exit Only Dummy Key Key Key No Cylinder No Cylinder
(cover plate) Trim Retracts Locks/Unlocks Locks/Unlocks Lever/Knob Thumbpiece
Latchbolt Thumbpiece Lever/Knob Always Active Always Active
Device with Trim: Add Suffix: for options, see page 14.
Device No. Add Prefix: “V” Vandal Resistant Lever Trim
Add Prefix for options, Add Suffix: Lever or Knob Design (A,B,C,D,K)
see page 14. Grip Design (A,B,C)
RIES DEVICES 15
CONCEALED VERTICAL ROD EXIT DEVICES
FUNCTIONS - Functions are field selectable. The device DOGGING - 1/4" turn hex key dogging standard.
is furnished for a desired function if specified. If not NOT available on Fire Exit Hardware.
specified the “03” function is furnished standard. TOUCHBAR HEIGHT - 39-15/16" from floor standard.
BASE MATERIAL - The Cover, Touchbar, Device Specify required height if other than standard.
Channel, Lock/Hinge Side Filler and End Cap are REVERSIBLE - Reversible for all functions and trims.
furnished of heavy wrought Brass, Bronze or Stainless Standard packaging RHRB.
Steel. US28 Devices are furnished with Aluminum,
Brass, Bronze and Stainless Steel components. See UL LISTED - Panic and Fire Exit Hardware. For FIRE EXIT
“Base Material and Finish Chart” on page 3. HARDWARE Ratings see page 33. Conforms to UL10C
and UBC 7-2.
CHASSIS - Lock Stile Assembly - Investment Cast Steel,
Zinc Dichromated. ANSI/BHMA - Devices are BHMA certified for ANSI 156.3,
Grade 1.
VERTICAL RODS - Steel, plated. Top Rod is adjustable
from 6'-8" to 8'-0" or from 8'-1" to 10'-0". FINISHES - 605, 606, 612, 613, 625, 628, 630. For
Note: All vertical rod lengths are based on 39 15/16” exit device Finish description see page 3.
horizontal centerline. CYLINDERS - Rim Type, not furnished standard. Specify
TOP LATCHBOLT - Stainless Steel, Deadlocking, / " throw. when required. For cylinder details see page 19.
3
4
BOTTOM BOLT - Steel plated, independent action 5/8" STILE WIDTH - See Stile Information on page 36.
throw, with adjustment range to suit 3/4" door undercut. LESS BOTTOM ROD (LBR) OPTION - Specify suffix
CENTER CHASSIS - Steel plated, heavy wrought Steel “LBR” (e.g. 2808LBR). See UL FIRE LABEL RATING
Assembly with lock in place Top and Bottom Latch chart on page 33. Fire Rated Devices include FB277
Adjustors. Adjustment accessible through the door after Fire Bolt Assembly. For Fire Bolt Assembly image
installation. see page 35.
DEVICE OPTIONS
Prefix Description Page Suffix Description Page
DE Delayed Egress ..................................................24 ALK Exit Alarm: battery operated ............................27
E Electric Device......................................................28 ALW Exit Alarm: remote power ................................27
ELR Electric Latch Retraction......................................21 BRL Braille Touchbar................................................35
FL Fire Exit Hardware ..............................................16 CD Cylinder Dogging ..............................................9
HC Windstorm and Hurricane Code Device............20 DS Door Position Monitoring Switch ....................29
LS Latchbolt Monitoring Switch................................29 LBR Less Bottom Rod..............................................16
Q Wireless Access Management System ..30-32 LD Less Dogging ............................................19
TDS Touchbar Monitoring Double Switch ..................29 SEC Security Screws..................................................3
TS Touchbar Monitoring Switch................................29 SNB Sex Nut and Bolt ..............................................3
WTDS Weatherized Touchbar Mon. Dbl. Switch ..........29 WALW Weatherized Exit Alarm: remote power..........27
S460 WTS Weatherized Touchbar Mon. Switch ..................29 To specify add Prefix to Device No. (e.g. TS2803)
To specify add Prefix to Device No. (e.g. TS2803)
16 APEX 2000 SE
TRIMS
TRIMS
1700A 1700B 1700C C03
“A” Grip “B” Grip “C” Grip Cast Plate 1. All Trims are furnished with wrought plates
“Pull by others” and extruded or cast solid grips.
2. Specify Grip Design (A,B,C) (“A” Grip
furnished standard for C1700 Series Trim)
3. 630 Trim is furnished for 628 Devices.
ANSI 01 02 03 05 08 14 15
Function Exit Only Dummy Key Key Key No Cylinder No Cylinder
(cover plate) Trim Retracts Locks/Unlocks Locks/Unlocks Lever/Knob Thumbpiece
Latchbolt Thumbpiece Lever/Knob Always Active Always Active
Device 2801 2802 2803** 2805 2808 2814 2815
Nos. FL2801 FL2803** FL2805 FL2808 FL2814 FL2815
Trim C1701 C1702A C03 1705A 4908A 4914A C1715A
Nos. 4901 4902A C1703A V4908A
4903A
Device with Trim: Add Suffix: for options, see page 16.
Device No. Add Prefix: “V” Vandal Resistant Lever Trim
“C” Concealed Vertical Rod – Pull Trim
Add Prefix for options, “R” Retrofit Trim
see page 16.
Add Suffix: Lever or Knob Design (A,B,C,D,K)
Grip Design (A,B,C)
Add Suffix: “KNR” Knurled Lever or Grip (Abrasive Strip)
RIES DEVICES 17
MULLIONS
MULLIONS
Mullion Cap
MC822
Hurricane
Mullion Tube
Adapter - Interlock Stabilizer (2 stabilizers
05299-57 S1447 ST989 furnished standard)
Removable Mullions
The Mullion is used to adapt a double door opening to two single door openings with Rim Exit Devices.
When the full width of an opening is required, the mullion may be removed.
KEY REMOVABLE MULLION (KR) - Provides a secure yet quick & easy means of removing the 822 or
FL822 Mullion. The mullion can be reinstalled and locked without the need of the key.
STOCK SIZE - For openings 8'-0" high. For openings less than 8'-0" high the mullion can be cut down.
For openings greater than 8'-0" high using the 822, KR822 or 811 mullions, consult factory.
FINISHES - 600, 689, 695. For finish description see page 3.
822, FL822, KR822, FLKR822 Mullion
Mullion U.L. LISTED - FL822 and FLKR822 listed for Fire Exit Hardware. For FIRE LABEL RATING CHART see pg 33.
Base MULLION TUBE - 94" L x 2" W x 3" D x 1/8" Thick Steel.
MB822
MULLION BASE - Investment Cast Steel, 2" wide 3-1/2" deep. Furnished with steel anchors for
Mullion concrete floors.
Cap INTERLOCK - Black Powder Coated Investment Cast Stainless Steel. Furnished standard for FL822
MC811
and FLKR822 Mullions. It interlocks the mullion to the Rim Active Case and S300 or S301 strike.
STABILIZERS - Black Powder Coated Steel. Two Stabilizers are furnished standard for FL822 and
FLKR822 Mullions.
MULLION CAP SPACER - Minimum width 3-1/2". For 2-1/4" frame spacer specify part No. MCS822.
For use with 822 series mullion only (e.g. 822, FL822, HC822, HCKR822, KR822, FLKR822).
MCS822 Kit or 822 mullion sufix option. See “To Order” example below.
822, FL822 MULLION CAP - MC822 Investment Cast Steel, 4" wide 3-5/8" deep.
KR822, FLKR822 KEY REMOVABLE MULLION CAP ASSEMBLY - Investment Cast Steel - can be
ordered to convert existing 822 or FL822 mullions to Keyed Removable Mullions. Retrofits to the hole
pattern of an MC822 Mullion Cap. To order specify: KMC822 or KMC822F. For wire run information,
please consult factory.
CYLINDER - not furnished standard - Rim Type required. See page 19 for cylinder details.
811 Mullion
MULLION - 2" x 2" Steel Mullion.
MULLION CAP - Cast 4-1/2" wide x 2-5/16", furnished with machine screws for metal frames.
Mullion MULLION BASE - Cast 2" wide x 2-3/4", furnished with sheet metal screws and plastic anchors.
Base
MB811
To Order: Specify Mullion No. Height Finish (e.g. 822 x 8'-0" x 600)
18 APEX 2000 SE
CYLINDER FUNCTIONS
CYLINDER FUNCTIONS
Cylinder Dogging Kit
1-5/32" .703"
1-1/4"
Mortise Cylinder - 1E74-C4 x Finish
RIES DEVICES 19
WINDSTORM AND HURRICANE CODE DEVICES
20 APEX 2000 SE
ELECTRIC LATCH RETRACTION
RIES DEVICES 21
ELR POWER SUPPLY ACCESSORIES
The BT150-07 Battery Backup is an optional card that can STATUS LIGHT
RED: Charging/Monitor
be installed in the ELR150 Series Power Supply to provide GREEN: Charged Complete
temporary power to ELR Devices in case of power BATTERY HOOKUP
shortage or outages. Uses (2) 12VDC Lead Acid batteries (2) 12 Volt Lead Acid Batteries wired in
series (External to Power Supply)
(furnished by others). One Amp hour set of batteries
provides approximately 15 minutes of backup to four exit
devices. 24V Power tap is also included to provide power
to Card Readers, etc.
Electrical Ratings – 24 VDC, 0.8 Amp. - Power Tap
To Order: specify BT150-07
22 APEX 2000 SE
ELR APPLICATION CHARTS
EXIT EXIT
DEVICE DEVICE
(NOTE 3) (NOTE 3)
PUSH PUSH
BUTTON BUTTON
(NOTE 1) (NOTE 1)
4 CONDUCTOR (28 GAGE MIN.) POWER TRANSFER REQUIRED. EPT-5 CONCEALED POWER TRANSFER (see page 29), DOOR
CORD OR HINGE (FURNISHED BY OTHERS)
4 CONDUCTOR (28 GAGE MIN.) POWER TRANSFER REQUIRED. EPT-5 CONCEALED POWER TRANSFER (see page 29), DOOR
CORD OR HINGE (FURNISHED BY OTHERS)
Notes:
1. Push Button may be replaced with Card Reader, keypad,etc.,
Maximum Wire Maximum Wire
providing normally open contacts and/or voltage inputs. See
Run for 22 Gage Run for 28 Gage
hookup instructions in the ELR150 Installation Instructions. Wire Gage Power Transfer Power Transfer
2. Activation for Door Operators are provided by dry contact on the
Control Module. (2) wires must be run from the Power Supply to 16 75' – 0" 55' – 0"
each operator requiring control. 14 125' – 0" 75' – 0"
3. Each exit device requires (4) wires to operate. See chart to the 12 200' – 0" ---
right for proper gage and wire run.
4. When Battery Backup is used, (2) 12 gage wires, less than 3
feet long, connect batteries to Backup. Batteries must be
mounted outside the power supply enclosure. Battery Backup
has a Power Tap feature that can provide power to a Card
Reader, keypad system, etc. See page 22 for details.
RIES DEVICES 23
DELAYED EGRESS
DELAYED EGRESS
FEATURES
FIRE ALARM CONTACTS – Fire Alarm input at any time will cut
power to the delayed egress function and provide immediate egress.
24 APEX 2000 SE
DELAYED EGRESS
DELAYED EGRESS (continued)
DELAYED EGRESS FEATURES: (Continued) The (DE) devices are furnished with a decal which states:
DOOR POSITION SWITCH – used in conjunction with the
Delayed Egress Exit Device, the following security features Push until alarm sounds.
are added: The Exit Device Alarm will sound if the door is Door can be opened in 15 seconds.
not closed when the device is armed. The Alarm will sound Note: A “30 Second” decal is provided when the 30 Second Delay
if the door is forced open when the device is armed. While option is specified.
the device is in the arming stage you may exit the opening.
DE ELECTRICAL SPECIFICATIONS
When the door closes the arm/rearm time is cut short and Voltage: 24VDC
the device is armed preventing unauthorized tailgating Current Disarmed: 100 mAmps
through the opening. Current Armed: 3.2 Amps for 200 ms, 200 mAmps steady state
DOOR WIDTHS Available for 3'-0" and 4'-0" openings. For open-
ings 3'-1" and greater, please specify door width requirements.
Note: Not available for openings less than 3'-0"
To Order: specify prefix “DE” (e.g. DEFL2108)
RIES DEVICES 25
DELAYED EGRESS APPLICATION CHARTS
2 x 18 GA.
2 x 18 GA. 2 x 18 GA.
2 x 18 GA. 2 x 18 GA.
2 x 18 GA.
2 x 18 GA. 2 x 18 GA.
SINGLE DOOR - This application allows for remote Arm/Disarm DOUBLE DOOR - This application allows for remote Arm/Disarm
and remote monitoring of the Delayed Egress. The Exit device and remote monitoring of the Delayed Egress. The Exit device
will delay egress when armed and will be a normal exit device will delay egress when armed and will be a normal exit device
when disarmed. The DS880 (DS) Door Position Switch (page 29) when disarmed. The DS880 (DS) Door Position Switch (page
prohibits the door from being held or forced open while the device 29) prohibits the door from being held or forced open while the
is armed. The 24 VDC, remote switch, remote horn and the DS device is armed. When one device is alarmed the other device
are routed through the power transfer and the fire alarm is wired will also go into alarm. The 24 VDC, remote switch, remote
to the power supply. horn and the DS are routed through the power transfer and
the fire alarm is wired to the power supply.
26 APEX 2000 SE
EXIT ALARM
EXIT ALARM
Weatherized Exit Alarm
Available for all Apex Series Devices. The Weatherized Exit
Alarm is identical in operation to the standard Exit Alarm but
incorporates a weatherized design for use on a variety of
applications where contact with the elements may occur.
WALW - Remote Powered 12 to 24 VDC at 0.25 Amp., a (2)
Exit Alarm wire power transfer is required, not furnished standard.
Available for all Apex Series Devices Specify WH495 Wire Harness for Remote Arm/Disarm
ALK - Battery Operated, provided with a 9 Volt battery and or alternate Input Activation options.
has a audible low battery indicator. Specify WH495 Wire Weather resistant loss prevention hardware designed for use
Harness for Remote Arm/Disarm or alternate Input Activation in outdoor or wet environments
options.
ALW - Remote Powered 12 to 24 VDC at 0.25 Amp., a (2) • Meets the requirements of MIL-STD 810F, Method 506.4,
wire power transfer is required, not furnished standard. Driving Rain Test (simulating 4 in./hr. rain with 40 mph wind)
Specify WH495 Wire Harness for External Wire features: • Meets the requirements of MIL-STD 810F, Method 509.4,
• External Arm/Disarm (On/Off) Salt Fog test (simulating effects of corrosive environments
• External Activation (to sound Alarm) similar to atmospheric conditions found in costal regions)
The Exit Alarm provides a simple way to audibly monitor the To Order:
use of an exit device. The unit contains a Piezo Alarm which Device with Weatherized Exit Alarm - add suffix “WALW” to
will sound when the touchbar is depressed. Alarm sounds at Device No. (e.g. 2108WALW)
80db at 10 feet.
It is also equipped with an LED indicator. The LED flashes
GREEN for 20 seconds when the unit is arming and flashes
RED every 20 seconds when the alarm is armed.
Note: Latch Bolt Monitoring (LS) or Door Position Switch (DS)
is recommended when using Alarm option with 2200 Series
Surface Vertical Rod devices.
CYLINDER
The Exit Alarm requires a standard 1-1/4 Mortise Cylinder (for
cylinder details see page 19) which is used as a key switch to
perform the following functions: Exit Alarm Kit
• To turn on (Arm) - it will allow 20 seconds to exit before Available for all Apex Devices from 3-0 to 4-0 wide doors.
alarm sounds. Furnished with Touchbar decal which states:
• Silence and reset the alarm after unauthorized egress.
• To turn off (Disarm) the alarm for continuous unmonitored
egress.
• Engage mechanical Dogging for Non-Fire Rated Devices. The Exit Alarm is available in Kits for Retrofit on existing
WIRING HARNESS - WH495 devices. The channel fillers are different lengths for Narrow
Can be wired for one or both of the options listed below. and Wide Stile devices. “N” denotes Narrow Stile devices.
• Exit Alarm can be turned on (Armed) with alternate inputs. To Order:
For other than our DS880 or NDS986 Door Position Switch Device with Alarm - add suffix “ALK”, “ALW” (e.g. 2108ALK)
a (2) wire power transfer hinge is required (furnished by
others). Alarm Kits
• Exit alarm can be turned on (Armed) or off (Disarmed) from Wide Stile Devices
a remote location. A Cylinder or Dummy Cylinder (by others) 2-6 & 3-0 ALK-3, ALW-3
is required. Cylinders are not furnished standard. Specify 4-0 ALK-4, ALW-4
when required (for cylinder details see page 19). A (2) wire Narrow Stile Devices
power transfer is required, not furnished standard. 3-0 NALK-3, NALW-3
To Order: specify WH495 4-0 NALK-4, NALW-4
EXTERNAL ARM/DISARM • WH495 Wiring Harness - Required for External Arming/
(ON/OFF) Disarming the Alarm and External Activation to sound the
(wire colors: Black and Yellow)
Alarm.
• Kits are available in finishes 605, 606, 612, 613, 625, 628,
EXTERNAL ACTIVATION 630. For finish description see page 3.
(TO SIGNAL ALARM)
(wire colors: Black and Red)
• To order specify Kit No. and finish (e.g. ALK-3 626).
Note: The Exit Alarm is NOT required when ordering the (DE) Delayed Note: For Battery operated kits a 9 Volt battery is included.
Egress option.
RIES DEVICES 27
ELECTRIC DEVICES
ELECTRIC DEVICES
28 APEX 2000 SE
MONITORING SWITCHES
MONITORING SWITCHES
Touchbar Monitoring Latchbolt Monitoring
Available for all Apex Series Devices. The Touchbar Monitoring Available for Wide Stile Rim, Mortise and Vertical Rod Devices.
Switch is an internally mounted switch that is used to signal The Latchbolt Monitoring Switch is an internally mounted switch
electromagnetic locks, horns, monitoring stations or other that monitors the position of the latchbolt. The switch can be
electronic components. used to signal a monitoring station or an alarm such as a
Precision ALK/ALW Exit Alarm. For the security of the opening
• UL Listed for Panic and Fire for Class II Circuitry.
a Door Position Monitoring Switch is recommended.
• TS and TDS can be used in combination with all Apex
options including ELR Devices. • UL Listed for Panic and Fire for Class II Circuitry.
• LS and LDS can be used in combination with all Apex options
TS (SPDT - Single Pole, Double Throw) version allows for
including ELR Devices.
interface with one external component. A (2) wire power transfer
LS (SPDT - Single Pole, Double Throw) version allows for inter-
is required, not furnished standard.
face with one external component. A (2) wire power transfer is
TDS (DPDT - Double Pole, Double Throw) version allows for inter required, not furnished standard.
face with two external components. A (4) wire power transfer is
LDS (DPDT - Double Pole, Double Throw) version allows for inter
required, not furnished standard.
face with two external components. A (4) wire power transfer is
To Order: specify prefix TS or TDS (e.g. TS2108) required, not furnished standard.
Touchbar Monitoring Conversion Kit To Order: specify prefix LS or LDS (e.g. LS2108)
TS and TDS options are available as kits, specify TSK309 for Latchbolt Monitoring Conversion Kit
Single Switch Monitoring or TDSK310 for Double Switch LS or LDS option is available as a kit for Wide Stile Devices,
Monitoring. specify LSRK298 or LDSRK299 for Rim Devices or LSVK910
for Vertical Rod Devices. For Mortise Devices see Electric
Electrical Ratings Mortise Lock, page 28.
TS: Switch rated to 2 Amps at 24VDC SPDT
TDS: Switch rated to 2 Amps at 24VDC DPDT Electrical Ratings
LS: Switch rated to 2 Amps at 24VDC SPDT
Weatherized LDS: Switch rated to 2 Amps at 24VDC DPDT
Touchbar Monitoring
Available for all Apex Series Devices. Weatherized Touchbar
Switch WTS/WTDS is designed for use on a variety of exit Power Transfer
device applications where contact with the elements may occur. EPT-5 Power Transfer with steel housing
Provided with the same specifications as the standard Touchbar and flexible tube. Secure and inconspicuous
monitoring. channel to bring power from the frame to the
door. Narrow, shallow channel easily
• Meets the requirements of MIL-STD 810F, Method 506.4, mortises into frame edges. Accepts up to
Driving Rain Test (simulating 4 in./hr. rain with 40 mph wind) 5/16" diameter wire bundle. Accommodates
• Meets the requirements of MIL-STD 810F, Method 509.4, doors that swing open 120 degrees. Unit is
Salt Fog test (simulating effects of corrosive environments concealed when the door is closed. Suitable
similar to atmospheric conditions found in costal regions) for wood, aluminum or steel applications.
To Order: specify prefix WTS or WTDS (e.g. WTS2108) Finish Bright Chrome. Will hold up to (10)
22 gauge Teflon coated wires.
To Order: specify EPT-5.
Door Position
Monitoring Switch
EPT-2 Armored flex conduit.
A Magnetic Reed type switch used to monitor the position of a
Accepts up to 1/4 diameter
door from a remote location. It is mounted in the Touchbar
wire bundle. Eighteen inches
Endcap and Door Frame.
long.
Electrical Ratings 1.5 Amps at 24VDC SPDT
To Order: specify EPT-2.
To Order: Wide Stile: specify DS880 and finish.
Narrow Stile: specify NDS986 and finish.
RIES DEVICES 29
WIRELESS ACCESS MANAGEMENT SYSTEM
WIRELESS ACCESS MANAGEMENT SYSTEM
Wireless Activation
The EXQ trim is part of the Stanley® Wi-Q™ Technology Wireless Access Management System.
Wireless Access Management System includes:
A) – Precision Q2000 exit device
B) – BEST® EXQ trim
C) – WQX–PG portal gateway
D) – Stanley® Wi-Q™ Technology Software
Note: Items ordered separately.
System Features
• Programmable time selections
for desired wireless Lock/Unlock
activation
• 65,000 user storage capacity
• Visual LED Indicators
• Redundant storage, up to 99,000
events
• Provides online alarm monitoring
capabilities
• Battery powered by ‘AA’ battery
pack
• Access decisions made at the door
• Remote reader diagnostics right
from the PC
To Order:
Q-Option – Specify prefix Q (ex.Q2103)
Q-Retrofit kit
QSRK5267 – 2103 Rim A) Precision™
QSVK5268 – 2203, 2703, 2803 Vertical Rod Q2103 Exit Device
30 APEX 2000 SE
W I R E L E S S A C C E S S M A N A G E M E N T S Y S T E M (continued)
The BEST EXQ trim is offered with four different activation styles to choose from. These four types are listed below.
1. MS – Magnetic Stripe
2. DV – Dual Validation (Magnetic Stripe + Keypad)
3. PH – HID Proximity
4. PM – Indala Proximity
For more information on other trims or trim readers refer to: BEST® EZ series, NT500, B.A.S.I.S. G, B.A.S.I.S. V, and
Wireless Access Management catalogs.
Wireless Access Management System continued on pages 30 and 32
RIES DEVICES 31
WIRELESS ACCESS MANAGEMENT SYSTEM
W I R E L E S S A C C E S S M A N A G E M E N T S Y S T E M (continued)
D) Stanley® Wi-Q™
Technology Software
32 APEX 2000 SE
FIRE LABEL RATING
RIES DEVICES 33
STRIKES
STRIKES
Rim Exit Devices
For Minimum Stile Widths see pages 36 and 37.
1-1/8" 1-1/8" 1-1/8"
3/4" 3/4" 1/2"
1-3/4"
1/2"
S300 Standard S301 Optional S458 For (paired) mullion S988 For (single) aluminum
For Rim and Top Strike for For Rim and Top Strike for applications door applications
SVR Devices. Specify for SVR Devices. Black Powder For Rim Devices. Black For Narrow Stile Rim
FL2400 Devices on Pair of Coated Investment Cast, Powder Coated Investment Devices. Black Powder
Doors with Mullion. Black Stainless Steel Base and Cast, Stainless Steel Base Coated Investment Cast,
Powder Coated Investment Roller. and Roller. Stainless Steel Base and
Cast Stainless Steel. Roller. Includes Rub Strip.
2-3/8" 2-3/8"
1-19/32"
S460 Bottom Strike S519 Top Strike S459 Optional Rim Strike
For Vertical Rod Devices, For Concealed Vertical Rod Devices. For Non Fire Rated 2100 Rim x Vertical
Surface or Concealed. Black Powder Coated Investment Rod Device on a Pair of Doors without a
Black Powder Coated Cast Stainless Steel. Mullion. Black Powder Coated
Steel. Investment Cast Stainless Steel.
8"
34 APEX 2000 SE
MISCELLANEOUS COMPONENTS
MISCELLANEOUS COMPONENTS
Dummy Touchbar
Braille Touchbar
FB277 - Fire bolt assembly. (See below)
FB277–
Fire Bolt Assembly
Miscellaneous
Top
Transom Bracket - 2200 Series. Strike
TMB453 - To mount the top strike
in the flush transom application.
Prepped for S300 Strike.
Door
Dogging Key Rod Guide Top
Latch
DK220 - 7/32 standard hex. RG124 - For Surface Vertical
Rod Devices. Specify finish.
RIES DEVICES 35
MINIMUM STILE WIDTH - Apex Wide Stile
2-1/16"
2-1/4"
Strike Strike
Rim Device with Rim Device with S988 Strikes Mortise Device
S300 or S301 Strikes For 3-1/2" medium stile Aluminum doors
and frames. Consult factory.
Pair of Doors
Stile Width Stile Width Stile Width Stile Width
4-5/8" Min. 4-5/8" Min. 4-3/8" Min. 4-3/8" Min.
Backset 3-1/8" Backset 3-1/8" Backset 2-15/16" Backset 2-15/16"
Mullion Mullion
Rim Devices with S300 or S301 Rim Devices with S458 Strikes and Mullion
Strikes and Mullion
Stile Width Stile Width Stile Width Stile Width
4-1/4" Min. 4-1/4" Min. 3-1/2" Min. 3-1/2" Min.
Backset 2-3/4" Backset 2-1/4" Backset 1-3/4" Backset 1-3/4"
Strike
2-1/2" 2-1/2"
Device Device
Backset Backset
Mortise and Vertical Rod Device Wood Door Concealed
Surface or Concealed Vertical Rod Devices
36 APEX 2000 SE
MINIMUM STILE WIDTH
3" Minimum Stile 3" Minimum Stile 3-1/4" Minimum Stile 3-1/4" Minimum Stile
Backset 2-1/8" Backset 2-1/8" Backset 2-5/16" Backset 2-5/16"
Rim Devices with S458 Strikes and Mullion Rim Devices with S300 or S301
Strikes and Mullion
1-3/16"
8-5/16" 8-5/16"
2-3/16" 2-3/16"
3-1/2" Touchbar 2-5/8" Touchbar 2-11/16" 3-1/4" Touchbar 2-3/8" Touchbar 1-1/4"
Neutral Depressed Neutral Depressed
RIES DEVICES 37
TRIM DIMENSIONS
TRIM DIMENSIONS
1700A 1700B 1700C 2000C C03
3/8"
2-1/2"
2-1/8"
Lever Centerline 38-3/16" from Finish Floor when Device Centerline is 39-15/16".
38 APEX 2000 SE
NOTES
NOTES
RIES DEVICES 39
PRECISION HARDWARE
For more information on Stanley Security Solutions’ products, services, and office locations visit our web site at www.stanleysecuritysolutions.com
Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible. Errors
or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or
which may be subject to changes or modifications by the manufacturer without notice and without obligation. Therefore, no guarantee can be made or
should be assumed or implied with regards to product information contained in this catalog.
COMPANY HISTORY
To our valued customers, we appreciate your loyalty over the years and proudly present our
Architectural Hardware offering.
2 5 K N U C K L
5 kNuCkle BAll BeARING HINGeS
• The vertical load of the door is supported by through-hardened chrome alloy, vertical thrust
ball bearing assemblies.
• The lateral load of the door is supported by the pin bearing on the inside of the hinge
knuckles.
• Large cold headed, drawn stock of the pins and long bearing area within the knuckles
distributes lateral wear over a greater area, resulting in increased life of the hinge.
• Approved for use on all types of fire doors up to 4' x 10' (1219mm x 3048mm), 8' x 10'
(2438mm x 3048mm) pairs, to maintain the integrity of fire rated openings and walls.
Refer to NFPA80.
E H I N G E S 3
5 kNuCkle Full MORTISe HINGeS
StANLEy ARcHItEctuRAL HIARdwARE
FBB179 – (ANSI A8112) Steel – polished and plated or phosphated and prime coated for painting
FBB191 – (ANSI A2112) Brass or bronze – polished and plated or painted
FBB191 (32) – (ANSI A5112) Stainless steel – highly polished
FBB191 (32D) – (ANSI A5112) Stainless steel – satin finish
Size Open Gauge Flat Head Screws Quantity Quantity Case Weight
of Metal Per Piece Per Box Per Case Bronze Steel
Inches (mm) Inches (mm) Machine Wood Lbs. (Kg) Lbs. (Kg)
31/2 X 3 (89 X 76) .123 (3.1) 6 - 10-24 X 1/2 6 -10 X 1 3 EA. 90 EA. 58 (26) 54 (24)
31/2 X 31/2 (89 X 89) .123 (3.1) 6 - 10-24 X 1/2 6 -10 X 1 3 EA. 90 EA. 65 (29) 59 (27)
4 X 31/2 (102 X 89) .130 (3.3) 8 - 12-24 X 1/2 8 -12 X 11/4 3 EA. 48 EA. 43 (19) 39 (18)
4X4 (102 X 102) .130 (3.3) 8 - 12-24 X 1/2 8 -12 X 11/4 3 EA. 48 EA. 45 (20) 42 (19)
41/2 X 4 (114 X 102) .134 (3.4) 8 - 12-24 X 1/2 8 -12 X 11/4 3 EA. 48 EA. 55 (25) 52 (24)
41/2 X 41/2 (114 X 114) .134 (3.4) 8 - 12-24 X 1/2 8 -12 X 11/4 3 EA. 48 EA. 59 (27) 55 (25)
5 X4 (127 X 102) .146 (3.7) 8 - 12-24 X 1/2 4 -12 X 11/4 3 EA. 30 EA. 41 (19) 39 (18)
5 X 41/2 (127 X 114) .146 (3.7) 8 - 12-24 X 1/2 4 -12 X 11/4 3 EA. 30 EA. 45 (20) 43 (19)
5X5 (127 X 127) .146 (3.7) 8 - 12-24 X 1/2 4 -12 X 11/4 3 EA. 30 EA. 50 (23) 46 (21)
*6 X 41/2 (152 X 114) .160 (4.1) 10 - 1/4 -20 X 1/2 5 -14 X 11/2 3 EA. 24 EA. 43 (19) 36 (16)
*6 X 5 (152 X 127) .160 (4.1) 10 - 1/4 -20 X 1/2 5 -14 X 11/2 3 EA. 24 EA. 47 (21) 40 (18)
*6 X 6 (152 X 152) .160 (4.1) 10 - 1/4 -20 X 1/2 5 -14 X 11/2 3 EA. 24 EA. 67 (30) 61 (28)
* Available in Steel only
Consult factory for other sizes not listed
4 5 K N u c K L
5 kNuCkle Full MORTISe HINGeS
FBB168 – (ANSI A8111) Steel – polished and plated or phosphated and prime coated for painting
FBB199 – (ANSI A2111) Brass or bronze – polished and plated or painted
FBB199 (32) – (ANSI A5111) Stainless steel – highly polished
FBB199 (32D) – (ANSI A5111) Stainless steel – satin finish
• For use on heavy doors or doors where high frequency is expected such as entrance doors to office buildings,
stores, public buildings and corridor entrance doors to offices
• All hinges have template screw hole location for use on either wood or hollow metal doors and frames
• Equipped with four Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Hole in bottom tip for easy pin removal
• Reversible flush tips and pins
• Hinges can be furnished as follows:
with raised barrel (RB)
with electric wires and/or switches (CE and/or CS)
with hospital tips (HT)
with decorative tips
with security studs
with non-removable pins (NRP)
Size Open Gauge Flat Head Screws Quantity Quantity Case Weight
of Metal Per Piece Per Box Per Case Bronze Steel
Inches (mm) Inches (mm) Machine Wood Lbs. (Kg) Lbs. (Kg)
41/2 X 41/2 (114 X 114) .180 (4.6) 8 - 12-24 X 1/2 8 -12 X 11/4 3 EA. 30 EA. 45 (21) 42 (19)
5 X 41/2 (127 X 114) .190 (4.8) 8 - 12-24 X 1/2 8 -12 X 11/2 3 EA. 24 EA. 46 (21) 40 (18)
5X5 (127 X 127) .190 (4.8) 8 - 12-24 X 1/2 8 -12 X 11/2 3 EA. 24 EA. 50 (23) 46 (21)
6 X 41/2 (152 X 114) .203 (5.2) 10 - 1/4 -20 X 1/2 10 -14 X 11/2 3 EA. 24 EA. 63 (29) 53 (24)
6X5 (152 X 127) .203 (5.2) 10 - 1/4 -20 X 1/2 10 -14 X 11/2 3 EA. 24 EA. 65 (30) 55 (25)
6X6 (152 X 152) .203 (5.2) 10 - 1/4 -20 X 1/2 10 -14 X 11/2 3 EA. 24 EA. 76 (35) 61 (28)
8 X 6* (203 X 152) .203 (5.2) 16 - 1/4 -20 X 1/2 16 -14 X 11/2 3 EA. 12 EA. 57 (26) 51 (23)
8 X 8* (203 X 203) .203 (5.2) 16 - 1/4 -20 X 1/2 16 -14 X 11/2 3 EA. 12 EA. 68 (31) 61 (28)
*Available in Steel only
Consult factory for other sizes not listed
E H I N G E S 5
5 kNuCkle HAlF SuRFACe HINGeS
StANLEy ARcHItEctuRAL HIARdwARE
FBB173 (ANSI A8412) – Steel – polished and plated or phosphated and prime coated for painting
FBB112 (ANSI A2412) – Brass or bronze – highly polished and painted or plated
FBB112 (32) (ANSI A5412) – Stainless steel – highly polished
FBB112 (32D) (ANSI A5412) – Stainless steel – satin finish
• For medium weight wood, kalamein, or mineral core doors with edge rails that won’t hold screws, hung on hollow
metal frames, of average frequency
• Equipped with two Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Reversible flush tips and pins
• Hinges can be furnished with hospital tips (HT)
• Consider using a back plate with these hinges
• Packed with machine screws and grommet nuts for 1 3/4" doors
Measurements below
Size Width Offset Gauge Flat Head Machine Quantity Quantity Case Weight
Length of Joint Frame Leaf Door Leaf of Metal Screws/Per Piece Per Box Per Case
(A) (B) (C) Bronze Steel
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Frame Leaf Door Leaf Lbs. (Kg) Lbs. (Kg)
4 (102) 1 13/16 (46) 2 1/4 (57.2) /2
1
(12.7) .130 (3.3) 4-12-24 X /2 3 -1/4-20 X 2 3 EA.
1
48 EA. 56 (26) 47 (22)
4 /2
1
(114) 2 /16
1
(52.4) 2 /16
9
(65.1) /16
9
(14.3) .134 (3.4) 4-12-24 X /2 3 -1/4-20 X 2 3 EA.
1
30 EA. 44 (20) 37 (17)
5 (127) 2 1/16 (52.4) 2 7/8 (73) 9/16 (14.3) .146 (3.7) 4-12-24 X 1/2 4 -1/4-20 X 2 3 EA. 24 EA. 48 (22) 39 (18)
6 5 K N u c K L
5 kNuCkle HAlF SuRFACe HINGeS
FBB163 (ANSI A8411) – Steel – polished and plated or phosphated and prime coated for painting
FBB113 (ANSI A2411) – Brass or bronze – polished and plated or painted
FBB113 (32) (ANSI A5411) – Stainless steel – highly polished
FBB113 (32D) (ANSI A5411) – Stainless steel – satin finish
• For heavy or high frequency wood, or mineral core doors with edge rails that won’t hold screws hung on
hollow metal frames
• Equipped with four Stanley permanently lubricated non-detachable ball bearings
• Heavy weight gauges increase available bearing surface area for maximum friction reduction
• Pins in non-ferrous hinges are stainless steel
• Reversible flush tips and pins
• Hinges can be furnished with hospital tips (HT)
• Consider using a back plate with these hinges
• Packed with machine screws and grommet nuts for 1 3/4" doors
Measurements below
Size Width Offset Gauge Flat Head Machine Quantity Quantity Case Weight
Length of Joint Frame Leaf Door Leaf of Metal Screws/Per Piece Per Box Per Case
(A) (B) (C) Bronze Steel
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Frame Leaf Door Leaf Lbs. (Kg) Lbs. (Kg)
41/2 (114) 2 1/8 (54) 2 9/16 (65) 5
/8 (15.9) .180 (4.6) 4-12-24 X 1/2 3 -1/4-20 X 2 3 EA. 30 EA. 59 (27) 47 (21)
5 (127) 2 1/8 (54) 2 7/8 (73) 5
/8 (15.9) .190 (4.8) 4-12-24 X 1/2 4 -1/4-20 X 2 3 EA. 24 EA. 58 (26) 48 (22)
6 (152) 2 1/8 (54) 3 1/4 (82.6) 5
/8 (15.9) .203 (5.2) 5-1/4-20 X 1/2 4 -1/4-20 X 2 3 EA. 24 EA. 90 (41) 82 (37)
E H I N G E S 7
5 kNuCkle HAlF MORTISe HINGeS
StANLEy ARcHItEctuRAL HARdwARE
FBB167 (ANSI A8212) – Steel – polished and plated or phosphated and prime coated for painting
FBB108 (ANSI A2212) – Brass or bronze – polished and plated or painted
FBB108 (32) (ANSI A5212) – Stainless steel – highly polished
FBB108 (32D) (ANSI A5212) – Stainless steel – satin finish
• For medium weight hollow metal or wood doors of average frequency, hung on channel iron frames
• Equipped with two Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Reversible flush tips and pins
• Hinges can be furnished with hospital tips (HT)
Measurements below
Size Width Offset Gauge Flat Head Machine Quantity Quantity Case Weight
Length of Joint Frame Leaf Door Leaf of Metal Screws/Per Piece Per Box Per Case
(A) (B) (C) Bronze Steel
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Frame Leaf Door Leaf Lbs. (Kg) Lbs. (Kg)
41/2 (114) 1 1/2 (38.1) 2 1/16 (52.4) /16
7
(11.1) .134 (3.4) 3-12-24 X 1/2 3-12-24 X 1/2 3 EA. 30 EA. 30 (14) 29 (13)
5 (127) 1 1/2 (38.1) 2 1/16 (52.4) /16
7
(11.1) .146 (3.7) 4-12-24 X 1/2 4-12-24 X 1/2 3 EA. 24 EA. 37 (17) 33 (15)
8 5 K N u c K L
5 kNuCkle HAlF MORTISe HINGeS
FBB138 (ANSI A8211) – Steel – polished and plated or phosphated and prime coated for painting
FBB98 (ANSI A2211) – Brass or bronze – polished and plated or painted
FBB98 (32) (ANSI A5211) – Stainless steel – highly polished
FBB98 (32D) (ANSI A5211) – Stainless steel – satin finish
• For heavy or high frequency hollow metal or wood doors hung on channel iron frames
• Equipped with four Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Reversible flush tips and pins
• Hinges can be furnished with hospital tips (HT)
Measurements below
Size Width Offset Gauge Flat Head Machine Quantity Quantity Case Weight
Length of Joint Frame Leaf Door Leaf of Metal Screws/Per Piece Per Box Per Case
(A) (B) (C) Bronze Steel
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Frame Leaf Door Leaf Lbs. (Kg) Lbs. (Kg)
41/2 (114) 1 1/2 (38.1) 2 1/8 (54) 1
/2 (12.7) .180 (4.6) 3-12-24 X 1/2 4-12-24 X 1/2 3 EA. 30 EA. 36 (17) 36 (17)
5 (127) 1 1/2 (38.1) 2 1/8 (54) 1
/2 (12.7) .190 (4.8) 4-12-24 X 1/2 4-12-24 X 1/2 3 EA. 24 EA. 36 (17) 36 (17)
6 (152) 1 1/2 (38.1) 2 1/8 (54) 1
/2 (12.7) .203 (5.2) 4-1/4-20 X 1/2 5-1/4-20 X 1/2 3 EA. 24 EA. 48 (22) 48 (22)
E H I N G E S 9
5 kNuCkle Full SuRFACe HINGeS
StANLEy ARcHItEctuRAL HARdwARE
FBB171 (ANSI A8312) – Steel – polished and plated or phosphated and prime coated for painting
FBB110 (ANSI A2312) – Brass or bronze – polished and plated or painted
FBB110 (32) (ANSI A5312) – Stainless steel – highly polished
FBB110 (32D) (ANSI A5312) – Stainless steel – satin finish
• For medium weight kalamein mineral core or wood doors of average frequency hung on channel iron frames
• Equipped with two Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Reversible flush tips and pins
• Hinges can be furnished with hospital tips (HT)
• Consider using a back plate with these hinges
• Packed with machine screws and grommet nuts for 1 3/4" doors
Measurements below
10 5 K N u c K L
5 kNuCkle Full SuRFACe HINGeS
FBB169 (ANSI A8311) – Steel – polished and plated or phosphated and prime coated for painting
FBB109 (ANSI A2311) – Brass or bronze – polished and plated or painted
FBB109 (32) (ANSI A5311) – Stainless steel – highly polished
FBB109 (32D) (ANSI A5311) – Stainless steel – satin finish
• For heavy or high frequency mineral core or wood doors with edge rails that won’t hold screws, hung on
channel iron frames
• Heavy weight gauges increase available bearing surface area for maximum friction reduction
• Equipped with four Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Reversible flush tips and pins
• Hinges can be furnished with hospital tips (HT)
• Consider using a back plate with these hinges
• Available with an inline hole pattern for tubular doors
• Packed with machine screws and grommet nuts for 1 3/4" doors
Measurements below
E H I N G E S 11
5 kNuCkle SlIP-IN HINGeS
StANLEy ARcHItEctuRAL HARdwARE
FBB179 – (ANSI A8152) Slip-in application “A”, steel – polished and plated or painted
FBB191 – (ANSI A2152) Slip-in application “A”, brass or bronze – polished and plated or painted
FBB191 (32) – (ANSI A5152) Slip-in application “A”, stainless steel – highly polished
FBB191 (32D) – (ANSI A5152) Slip-in application “A”, stainless steel – satin finish
Size Open Gauge Flat Head Machine Quantity Quantity Case Weight
of Metal Screws/Per Piece* Per Box Per Case Steel Bronze
Inches (mm) Inches (mm) Lbs. (Kg) Lbs. (Kg)
4X4 (102 X 102) .130 (3.3) 8 - 12-24 X /2
1
3 EA. 48 EA. 44 (20) 45 (21)
4 1/2 X 4 (114 X 102) .134 (3.4) 8 - 12-24 X /2
1
3 EA. 48 EA. 52 (24) 55 (25)
4 1/2 X 4 1/2 (114 X 114) .134 (3.4) 8 - 12-24 X 1/2 3 EA. 48 EA. 55 (25) 59 (27)
* For application A when used on wood doors, specify wood screws for door leaf
FBB179 – (ANSI A8142) Slip-in application “B”, Steel – polished and plated or painted
FBB191 – (ANSI A2142) Slip-in application “B”, Brass or bronze – polished and plated or painted
FBB191 (32) – (ANSI A5142) Slip-in application “B”, Stainless steel – highly polished
FBB191 (32D) – (ANSI A5142) Slip-in application “B”, Stainless steel – satin finish
Size Open Gauge Flat Head Machine Quantity Quantity Case Weight
of Metal Screws/Per Piece Per Box Per Case Steel Bronze
Inches (mm) Inches (mm) Lbs. (Kg) Lbs. (Kg)
4X4 (102 X 102) .130 (3.3) 8 - 12-24 X /2
1
3 EA. 48 EA. 44 (20) 45 (21)
4 1/2 X 4 (114 X 102) .134 (3.4) 8 - 12-24 X /2
1
3 EA. 48 EA. 52 (24) 55 (25)
4 1/2 X 4 1/2 (114 X 114) .134 (3.4) 8 - 12-24 X 1/2 3 EA. 48 EA. 55 (25) 59 (27)
12 5 K N u c K L
5 kNuCkle PIVOT ReINFORCeD HINGeS
Class Gauge Frame Plate Door Plate Flat Head Screws/Set Sets Case
Number of Metal Length Width Length Width Per Weight
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Wood Machine Case Lbs. (Kg)
FBB211 .190 (4.8) 5 (127) 1.25 (31.8) ... ... ... ... 28-12- X 11/2 28-12-24 X 1/2 1 6 (3)
FBB212 .190 (4.8) 5 (127) 1.25 (31.8) 7.78 (198) 1.25 (31.8) 32-12- X 11/2 32-12-24 X 1/2 1 7 (3)
FBB213 .190 (4.8) 5 (127) 1.25 (31.8) 7.64 (194) 1.25 (31.8) 32-12- X 11/2 32-12-24 X 1/2 1 7 (3)
FBB221 .190 (4.8) 5 (127) 1.25 (31.8) ... ... ... ... 12-12- X 11/2 28-12-24 X 1/2 1 6 (3)
FBB222 .190 (4.8) 5 (127) 1.25 (31.8) 7.78 (198) 1.25 (31.8) 16-12- X 11/2 32-12-24 X 1/2 1 7 (3)
FBB222 (32D) .190 (4.8) 5 (127) 1.25 (31.8) 7.78 (198) 1.25 (31.8) 16-12- X 11/2 32-12-24 X 1/2 1 7 (3)
FBB223 .190 (4.8) 5 (127) 1.25 (31.8) 7.64 (194) 1.25 (31.8) 16-12- X 11/2 32-12-24 X 1/2 1 7 (3)
FBB223 (32D) .190 (4.8) 5 (127) 1.25 (31.8) 7.64 (194) 1.25 (31.8) 16-12- X 11/2 32-12-24 X 1/2 1 7 (3)
Hinges supplied with set screw in barrel, non-removable pin
For doors over 7' 6" in height, specify additional hinges to order: specify catalog number, finish and hand
E H I N G E S 13
5 kNuCkle SWING CleAR HINGeS
StANLEy ARcHItEctuRAL HARdwARE
F248 – (ANSI A8123) Steel – polished and plated or phosphated and prime coated for painting
Class Size Minimum Gauge Flat Head Screws/ Quantity Quantity Case
Number Length of Joint Clearance of Metal Per Piece Per Box Per Case Weight
Required
Dimensions
“A”
inches (mm) inches (mm) inches (mm) Frame Leaf-Machine Door Leaf-Wood Lbs. (Kg)
FBB248, STSFBB248 4 1/2 (114) 2 1/8 (54) .134 (3.4) 4-12-24 X 1/2 4-12 X 11/4 3 EA. 24 EA. 36 (17)
FBB258, STSFBB258 4 1/2 (114) 2 1/8 (54) .134 (3.4) 4-12-24 X 1/2 4-12 X 11/4 3 EA. 24 EA. 36 (17)
14 5 K N u c K L
5 kNuCkle SWING CleAR HINGeS
Half Mortise
Full Mortise - FBB268 and STSFBB268 Half Surface For Channel Iron Frames Full Surface
{For square edge doors} (shown) FBB269 FBB264 and STSFBB264 For Channel Iron Frames
and STSFBB269 {For square edge doors} (shown) FBB266 and STSFBB266
FBB278† and STSFBB278†
{For doors beveled 1/8" in 2" (3.2 in 51mm)} FBB274† and STSFBB274†
{For doors beveled 1/8" in 2" (3.2 in 51mm)}
Class Size Minimum Gauge Flat Head Screws/ Quantity Quantity Case
Number Length of Joint Clearance of Metal Per Piece Per Box Per Case Weight
Required
Dimensions
“A”
inches (mm) inches (mm) inches (mm) Frame Leaf-Machine Door Leaf-Wood Lbs. (Kg)
FBB268, STSFBB268 4 1/2 (114) 2 /8
1
(54) .180 (4.6) 4-12-24 X 1/2 4-12 X 11/4 W.S 3 EA. 15 EA. 31 (14)
FBB268, STSFBB268 5 (127) 2 1/8 (54) .190 (4.8) 4-12-24 X 1/2 4-12 X 11/4 W.S 3 EA. 15 EA. 35 (16)
FBB278†, STSFBB278† 4 1/2 (114) 2 1/8 (54) .190 (4.8) 4-12-24 X 1/2 4-12 X 11/4 W.S 3 EA. 15 EA. 31 (14)
FBB278†, STSFBB278† 5 (127) 2 1/8 (54) .190 (4.8) 4-12-24 X 1/2 4-12 X 11/4 W.S 3 EA. 15 EA. 35 (16)
FBB269, STSFBB269 5 (127) 2 /8
1
(54) .190 (4.8) 4-12-24 X 1/2 5-1/4-20 X 11/4 M.S.* .... 3 EA. 9 (4)
FBB264, STSFBB264 5 (127) 2 1/8 (54) .190 (4.8) 4-12-24 X 1/2 4-12 X 11/4 W.S 3 EA. 15 EA. 35 (16)
FBB274† STSFBB274 5 (127) 2 1/8 (54) .190 (4.8) 4-12-24 X 1/2 4-12 X 11/4 W.S 3 EA. 15 EA. 35 (16)
FBB266, STSFBB266 5 (127) 2 1/8 (54) .190 (4.8) 4-12-24 X 1/2 5-1/4-20 X 11/4 M.S.* 3 EA. 15 EA. 35 (16)
* Furnished with through-bolts and grommet nuts.
† For doors beveled 1/8" IN 2" (3.2MM IN 51 MM) on hinge side.
For frame and door leaf dimensions refer to template furnished on request. If door closers, friction or overhead door holders are to be used in conjunction with
these hinges, consult manufacturer of the device to be used for application details
E H I N G E S 15
STANLEY ARCHITECTURAL HARDWARE
5 KNUCKLE HINGES
Full Mortise Standard Weight Plain Bearing
F179 – (ANSI A8133 except for 3" x 3") Steel – polished and plated or phosphated
and prime coated for painting
F191 – (ANSI A2133) Brass or bronze – polished and plated or painted
F191 (32) – (ANSI A5133) Stainless steel – highly polished
F191 (32D) – (ANSI A5133) Stainless steel – satin finish
• For use on internal or external doors without door closers in hospitals,
churches, schools, airports, hotels, malls, apartment houses, office buildings, etc.
• All hinges have template screw hole location for use on either wood or hollow
metal doors and frames
• Use anti-friction bearing hinges on high and average frequency doors and all
doors equipped with door closers
• Hinges can be furnished with hospital tips (HT)
Size Open Gauge Flat Head Screws/ Case Weight
of Metal Per Piece Quantity Steel Brass
Inches (mm) Inches (mm) Machine Wood Per Box Per Case Lbs. (Kg) Lbs. (Kg)
3 X 3* (76 X 76) .080 (2) 6 - 9 X 3/4 2 EA. 100 EA. 32 (15)
3 1/2 X 3 (89 X 76) .123 (3.1) 6 - 10-24 X 1
/2 6 -10 X 1 2 EA. 100 EA. 60 (27) 64 (29)
3 1/2 X 3 1/2 (89 X 89) .123 (3.1) 6 - 10-24 X 1
/2 6 -10 X 1 2 EA. 100 EA. 66 (30) 72 (33)
4 X 3 1/2 (102 X 89) .130 (3.3) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 48 EA. 38 (17) 44 (20)
4X4 (102 X 102) .130 (3.3) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 48 EA. 43 (20) 46 (21)
4 1/2 X 4 (114 X 102) .134 (3.4) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 48 EA. 51 (23) 54 (25)
4 1/2 X 4 1/2 (114 X 114) .134 (3.4) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 48 EA. 55 (25) 60 (27)
5X4 (127 X 102) .146 (3.7) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 30 EA. 40 (18) 43 (20)
5 X 4 1/2 (127 X 114) .146 (3.7) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 30 EA. 43 (20) 46 (21)
5 X 5* (127 X 127) .146 (3.7) 8 - 12-24 X 1
/2 8 -12 X 1 1/4 3 EA. 30 EA. 46 (21) 51 (23)
*Steel only – for other substrates consult factory