Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
FACULTAD DE INGENIERÍA
Resumen
Palabras claves
Abstract
The main purpose of this experience was preparing a buffer solution, buffer or buffer
with a basic pH. To this they were put in said preparation techniques solutions learned
from previous laboratory, in this case the preparation of a buffer solution of ammonium
chloride containing ammonia with PH 10 is seized, consequently solutions of HCl and
NaOH were prepared 0.1 M both , at year-end target of the practice it was to determine
if the solution of ammonium chloride obtained was buffered or not, for this to the
solution of ammonium certain amounts of hydroxide and acid subsequently its pH is
measured and this they added no should vary considerably, if so, considering the buffer
solution or stopper, in the same way to lead a reference control sample, a single amount
of distilled water is taken and the process described above with the solution is buffer
and proper observations are made.
All observations and results obtained for the preparation of the respective calculations
required for the preparation of the laboratory report are recorded.
1
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BÁSICAS
ÁREA DE LABORATORIO DE QUIMICA
FACULTAD DE INGENIERÍA
Keywords
2
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BÁSICAS
ÁREA DE LABORATORIO DE QUIMICA
FACULTAD DE INGENIERÍA
3
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BÁSICAS
ÁREA DE LABORATORIO DE QUIMICA
FACULTAD DE INGENIERÍA
4
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BÁSICAS
ÁREA DE LABORATORIO DE QUIMICA
FACULTAD DE INGENIERÍA
X La medición de la muestra de
agua control es 7.1 lógico ya que es
Sustanc PH PH PH
ia inicial con con neutra, Al agregar HCl al agua destilada
HCl Nacl la concentración de protones H+ de la
H2O 7,1 3 9,7 solución aumenta ;luego el pH
destilada disminuye bajo 3.0 haciéndose más
solución 9,55
acida, y cuando se agrega NaOH se
NH3
solución 10,45 10,40 10,44 pone más básica 9.7.
Buffer
5. Conclusiones
Al realizar la medición del PH de todas
las soluciones incluyendo la de la Con el desarrollo de la experiencia se
muestra control de agua destilada, se pudo cumplir con todos los propósitos
tienen las siguientes observaciones. de la misma, los cuales eran aprender a
preparar una solución buffer o
El PH inicial de la solución de amortiguadora y por medio de esta
lograr identificar todas sus propiedades.
amoniaco es 9.55 y al momento de
Por ejemplo una de las propiedades (la
agregarle los gramos determinados de más primordial) de las soluciones buffer
cloruro de amonio para convertirla en es que no varía considerablemente su
solución buffer su PH cambia a 10.45 PH al agregarle ácidos o bases fuertes,
(PH inicial de solución buffer), esta esto se vio en la experiencia, ya que al
momento de agregarle HCl a la solución
variación de PH en este caso ocurre buffer su PH se mantuvo dentro de las
porque el NH4Cl al ser una sal que se especificaciones permitidas (PH inicial
disuelve una base como el amoniaco se 10.45 a PH final de 10.40).
convierte en hidróxido, ósea la
Por otra parte al momento de determinar
concentración del ion hidróxido que es
el PH de la solución buffer, el cual
el causante de la alcalinidad generando teóricamente tendría que ser 10,
que el pH aumente desde 9.55 hasta experimentalmente nos dio 10.45, muy
10.45 cercano al valor teórico, posiblemente
los errores de paralaje que se
cometieron al momento de manipular el
5
UNIVERSIDAD DE LA COSTA
DEPARTAMENTO DE CIENCIAS BÁSICAS
ÁREA DE LABORATORIO DE QUIMICA
FACULTAD DE INGENIERÍA
Bibliografía