0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
34 visualizzazioni1 pagina
This document provides welding design check calculations for a connection involving rebar and a baseplate. It calculates the maximum moment, maximum shear, and maximum tensile stress from Staad analysis. It then determines the minimum required weld thickness, design resistances per unit length of weld, and stresses due to moment, shear, and tension. The resultant stress is found to be less than the design resistance, so the welding strength is determined to be adequate.
This document provides welding design check calculations for a connection involving rebar and a baseplate. It calculates the maximum moment, maximum shear, and maximum tensile stress from Staad analysis. It then determines the minimum required weld thickness, design resistances per unit length of weld, and stresses due to moment, shear, and tension. The resultant stress is found to be less than the design resistance, so the welding strength is determined to be adequate.
This document provides welding design check calculations for a connection involving rebar and a baseplate. It calculates the maximum moment, maximum shear, and maximum tensile stress from Staad analysis. It then determines the minimum required weld thickness, design resistances per unit length of weld, and stresses due to moment, shear, and tension. The resultant stress is found to be less than the design resistance, so the welding strength is determined to be adequate.
149B, Selegie Road, Selegie Court Sheet No: Singapore 188314 Designed by: JK Checked by: KH TAN Date: Title:
Welding Design Check EN -1993-1-8
From Staad
Welding Connection To Rebar and Baseplate
From Staad Analysis. Maximum moment = 0.100 kN*m Maximum shear = 10.000 kN (Intention to carry Tension and Shear Maximum Tensile Stress = 20.000 kN Only, min BM considered) Minimum thickness = minimum thickness of member or 3 mm = 5.0 mm Hence ok Design Resistances per Unit Length of weld. fw,rd = fv,wd * a fu = 430.0 N/mm2 β = 0.85 ϒ = 1.2 fv,wd = 243.4 N/mm2 a = 5.0 mm Welding Strength fw,rd = 1216.96 N/mm Moment of inertia of member = 5153 mm4 Section modulus of member = 573 mm3
Stress Due to moment = 174.7 N/mm
Effective Length of weld = 56.5 mm Stress Due to Shear = 176.84 N/mm Stess Due to tension = 353.68 N/mm