Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
* *
* PLS-POLE *
* POLE AND FRAME ANALYSIS AND DESIGN *
* Power Line Systems, Inc. (C) 1999 *
* *
***************************************************************************
Load case "EXTREME WIND 310KPH" checks steel, but not guys and cables: this is dubious. ??
The model has 1 warning. ??
Modeling options:
Offset Arms from Pole/Mast: Yes
Offset Braces from Pole/Mast: Yes
Offset Guys from Pole/Mast: Yes
Offset Posts from Pole/Mast: Yes
Offset Strains from Pole/Mast: Yes
Use Alternate Convergence Process: No
Steel poles checked with ASCE/SEI 48-05
Steel Pole Stock Length Default Base Shape Tip Base Taper Default Tubes Modulus of Weight Shape Strength Distance Ultimate Ultimate
Property Number Embedded Plate Diameter Diameter Drag Elasticity Density At Check From Trans. Long.
Label Length Coef. Override Override Base Type Tip Load Load
(m) (m) (mm) (mm) (mm/m) (MPa) (N/m^3) (m) (kN) (kN)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
85SP V2 B OPT2 26.00 3.21 No 16F 375 890 0 0.9 3 tubes 0 0 Calculated 0.000 0.0000 0.0000
Pole Tube Length Thickness Lap Lap Yield Moment Cap. Tube Calculated Tube Top Tube Bot. 1.5x Diam.
Property No. Length Gap Stress Override Weight Taper Diameter Diameter Lap Length
(m) (cm) (m) (mm) (MPa) (kN-m) (N) (mm/m) (cm) (cm) (m)
-----------------------------------------------------------------------------------------------------------------------
85SP V2 B OPT2 1 8.04 0.9 -1.000 0.000 500.000 0.000 8014 21.42289 37.50 54.72 0.79
85SP V2 B OPT2 2 9.85 1.2 -1.000 0.000 500.000 0.000 17540 21.42289 51.22 72.32 1.05
85SP V2 B OPT2 3 9.952 1.35 0.000 0.000 500.000 0.000 25338 21.42289 67.68 89.00 0.00
Pole Tip Base X of Y of Z of Inclin. Inclin. Property Attach. Base Embed % Embed C.
Label Joint Joint Base Base Base About X About Y Set Labels Connect Override Override
(m) (m) (m) (deg) (deg) (m)
-------------------------------------------------------------------------------------------------------
P 0 0 0 0 0 85SP V2 B OPT2 1 labels Fixed 0.00 0
Element Joint Joint Rel. Outer Area T-Moment L-Moment D/t W/t Fy Fa ASCE Cap ASCE Cap
Label Label Position Dist. Diam. Inertia Inertia Max. Min. Trans. Long.
(m) (cm) (cm^2) (cm^4) (cm^4) (MPa) (MPa) (kN-m) (kN-m)
------------------------------------------------------------------------------------------------------------
P P:t P:t Ori 0.00 37.50 104.83 17794.36 17794.36 0.00 6.3 500.00 500.00 474.52 474.52
P P:TL P:TL End 0.61 38.81 108.58 19768.59 19768.59 0.00 6.6 500.00 500.00 509.41 509.41
P P:TL P:TL Ori 0.61 38.81 108.58 19768.59 19768.59 0.00 6.6 500.00 500.00 509.41 509.41
P #P:0 Tube 1 End 2.13 42.07 117.93 25327.24 25327.24 0.00 7.3 500.00 500.00 602.00 602.00
P #P:0 Tube 1 Ori 2.13 42.07 117.93 25327.25 25327.25 0.00 7.3 500.00 500.00 602.00 602.00
P #P:1 Tube 1 End 3.66 45.34 127.28 31841.07 31841.07 0.00 8.0 500.00 500.00 702.33 702.33
P #P:1 Tube 1 Ori 3.66 45.34 127.28 31841.08 31841.08 0.00 8.0 500.00 500.00 702.33 702.33
P #P:2 Tube 1 End 5.18 48.60 136.63 39385.82 39385.82 0.00 8.8 500.00 500.00 810.39 810.39
P #P:2 Tube 1 Ori 5.18 48.60 136.63 39385.83 39385.83 0.00 8.8 500.00 500.00 810.39 810.39
P #P:3 Tube 1 End 6.21 50.81 142.96 45119.07 45119.07 0.00 9.2 500.00 500.00 887.96 887.96
P #P:3 Tube 1 Ori 6.21 50.81 142.96 45119.09 45119.09 0.00 9.2 500.00 500.00 887.96 887.96
P #P:4 SpliceT End 7.25 53.02 149.30 51383.38 51383.38 0.00 9.7 500.00 500.00 969.07 969.07
P #P:4 SpliceT Ori 7.25 53.02 149.30 51383.40 51383.40 0.00 9.7 500.00 500.00 969.07 969.07
P #P:5 SpliceB End 8.04 52.92 197.54 66962.30 66962.30 0.00 6.8 500.00 500.00 1265.25 1265.25
P #P:5 SpliceB Ori 8.04 52.92 197.54 66962.32 66962.32 0.00 6.8 500.00 500.00 1265.25 1265.25
P #P:6 Tube 2 End 9.56 56.19 210.01 80455.44 80455.44 0.00 7.3 500.00 500.00 1431.88 1431.88
P #P:6 Tube 2 Ori 9.56 56.19 210.01 80455.46 80455.46 0.00 7.3 500.00 500.00 1431.88 1431.88
P #P:7 Tube 2 End 11.09 59.45 222.47 95649.55 95649.55 0.00 7.9 500.00 500.00 1608.81 1608.81
P #P:7 Tube 2 Ori 11.09 59.45 222.47 95649.57 95649.57 0.00 7.9 500.00 500.00 1608.81 1608.81
P #P:8 Tube 2 End 12.61 62.72 234.94 112645.63 112645.63 0.00 8.4 500.00 500.00 1796.05 1796.05
P #P:8 Tube 2 Ori 12.61 62.72 234.94 112645.65 112645.65 0.00 8.4 500.00 500.00 1796.05 1796.05
P #P:9 Tube 2 End 14.14 65.98 247.41 131544.67 131544.67 0.00 9.0 500.00 500.00 1993.60 1993.60
P #P:9 Tube 2 Ori 14.14 65.98 247.41 131544.69 131544.69 0.00 9.0 500.00 500.00 1993.60 1993.60
P #P:10 Tube 2 End 15.09 68.03 255.23 144411.29 144411.29 0.00 9.3 500.00 500.00 2122.74 2122.74
P #P:10 Tube 2 Ori 15.09 68.03 255.23 144411.32 144411.32 0.00 9.3 500.00 500.00 2122.74 2122.74
P #P:11 SpliceT End 16.05 70.08 263.05 158090.77 158090.77 0.00 9.6 500.00 500.00 2255.93 2255.93
P #P:11 SpliceT Ori 16.05 70.08 263.05 158090.80 158090.80 0.00 9.6 500.00 500.00 2255.93 2255.93
P #P:12 SpliceB End 17.10 69.92 294.63 175527.95 175527.95 0.00 8.3 500.00 500.00 2510.24 2510.24
P #P:12 SpliceB Ori 17.10 69.92 294.63 175527.98 175527.98 0.00 8.3 500.00 500.00 2510.24 2510.24
P #P:13 Tube 3 End 18.62 73.19 308.66 201805.17 201805.17 0.00 8.8 500.00 500.00 2757.29 2757.29
P #P:13 Tube 3 Ori 18.62 73.19 308.66 201805.21 201805.21 0.00 8.8 500.00 500.00 2757.29 2757.29
P #P:14 Tube 3 End 20.14 76.45 322.68 230582.40 230582.40 0.00 9.3 500.00 500.00 3015.94 3015.94
P #P:14 Tube 3 Ori 20.14 76.45 322.68 230582.44 230582.44 0.00 9.3 500.00 500.00 3015.94 3015.94
P #P:15 Tube 3 End 21.67 79.72 336.71 261973.26 261973.26 0.00 9.8 500.00 500.00 3286.19 3286.19
P #P:15 Tube 3 Ori 21.67 79.72 336.71 261973.30 261973.30 0.00 9.8 500.00 500.00 3286.19 3286.19
P P:g Ground End 22.79 82.12 347.03 286800.57 286800.57 0.00 10.1 500.00 500.00 3492.41 3492.41
P P:g Tube 3 Ori 22.79 82.12 347.03 286800.62 286800.62 0.00 10.1 500.00 500.00 3492.41 3492.41
P P:f Fixity End 23.85 84.39 356.78 311655.60 311655.60 0.00 10.4 500.00 500.00 3693.02 3693.02
Clamp Properties:
Insulator dead and wind loads are already included in the point loads printed below.
Structure Height Summary (used for calculating wind/ice adjust with height):
Z of ground (lowest joint) 0.00 (m)
Ground elevation shift 0.00 (m)
Z of ground with shift 0.00 (m)
Z of structure top (highest joint) 22.79 (m)
Structure height 22.79 (m)
Structure height above ground 22.79 (m)
Load Case Dead Wind SF for SF for SF for SF for SF for SF for SF for SF for SF for SF For Point Wind/Ice Trans. Longit. Ice Ice Pole Pole
Description Load Area Steel Poles Wood Conc. Conc. Conc. Guys Non Braces Insuls. Found. Loads Model Wind Wind Thick. Density Deflection Deflection
Factor Factor Tubular Arms Poles Ult. First Zero and Tubular Pressure Pressure Check Limit
and Towers Crack Tens. Cables Arms (Pa) (Pa) (cm) (N/m^3) % or (m)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EXTREME WIND 310KPH 1.0000 1.0000 0.80000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 1.0000 1.0000 1.0000 1 load Wind on All 0 0 0.000 0.000 % Pole Height 10
Maximum element usage is 99.98% for Steel Pole "P" in load case "EXTREME WIND 310KPH"
Maximum insulator usage is 23.28% for Clamp "CL-TL" in load case "EXTREME WIND 310KPH"
Maximum pole deflection usage is 65.74% for "P" in load case "EXTREME WIND 310KPH"
*** Analysis Results for Load Case No. 1 "EXTREME WIND 310KPH" - Number of iterations in SAPS 13
Equilibrium Joint Positions and Rotations for Load Case "EXTREME WIND 310KPH":
Joint X-Displ Y-Displ Z-Displ X-Rot Y-Rot Z-Rot X-Pos Y-Pos Z-Pos
Label (m) (m) (m) (deg) (deg) (deg) (m) (m) (m)
------------------------------------------------------------------------------------------------
P:f 0 0 0 0.0000 0.0000 0.0000 0 0 -1.059
P:g -8.094e-025 0.002551 -9.562e-006 -0.2690 -0.0000 -0.0000 -8.094e-025 0.002551 -9.562e-006
P:t -1.501e-019 1.566 -0.0714 -7.3516 -0.0000 -0.0000 -1.501e-019 1.566 22.72
P:TL -1.369e-019 1.488 -0.06639 -7.3516 -0.0000 -0.0000 -1.369e-019 1.488 22.11
Detailed Steel Pole Usages for Load Case "EXTREME WIND 310KPH":
Element Joint Joint Rel. Trans. Long. Vert. Trans. Mom. Long. Mom. Tors. Axial Tran. Long. P/A M/S. V/Q. T/R. Res. Max. At
Label Label Position Dist. Defl. Defl. Defl. (Local Mx) (Local My) Mom. Force Shear Shear Usage Pt.
(m) (cm) (cm) (cm) (kN-m) (kN-m)(kN-m) (kN) (kN) (kN) (MPa) (MPa) (MPa) (MPa) (MPa) %
--------------------------------------------------------------------------------------------------------------------------------------------------
P P:t Origin 0.00 156.61 -0.00 -7.14 -0.00 0.00 0.0 -0.25 0.03 0.00 -0.02 0.00 0.01 0.00 0.03 0.0 6
P P:TL End 0.61 148.80 -0.00 -6.64 0.02 0.00 0.0 -0.25 0.03 0.00 -0.02 0.02 0.00 0.00 0.04 0.0 2
P P:TL Origin 0.61 148.80 -0.00 -6.64 0.02 0.00 0.0 13.64 115.63 0.00 1.26 0.00 21.64 0.00 37.51 9.4 6
P Tube 1 End 2.13 129.43 -0.00 -5.40 176.23 0.00 0.0 13.64 115.63 0.00 1.16 146.37 3.93 0.00 147.69 36.9 2
P Tube 1 Origin 2.13 129.43 -0.00 -5.40 176.23 0.00 -0.0 11.68 115.86 0.00 0.99 146.37 3.94 0.00 147.52 36.9 2
P Tube 1 End 3.66 110.84 -0.00 -4.27 352.81 0.00 -0.0 11.68 115.86 0.00 0.92 251.17 3.65 0.00 252.17 63.0 2
P Tube 1 Origin 3.66 110.84 -0.00 -4.27 352.81 0.00 -0.0 9.23 116.13 0.00 0.72 251.17 3.65 0.00 251.98 63.0 2
P Tube 1 End 5.18 93.50 -0.00 -3.28 529.79 0.00 -0.0 9.23 116.13 0.00 0.68 326.87 3.40 0.00 327.60 81.9 2
P Tube 1 Origin 5.18 93.50 -0.00 -3.28 529.79 0.00 -0.0 6.91 116.34 0.00 0.51 326.87 3.41 0.00 327.43 81.9 2
P Tube 1 End 6.21 82.64 -0.00 -2.70 649.86 0.00 -0.0 6.91 116.34 0.00 0.48 365.93 3.25 0.00 366.46 91.6 2
P Tube 1 Origin 6.21 82.64 -0.00 -2.70 649.86 0.00 -0.0 4.92 116.50 0.00 0.34 365.93 3.26 0.00 366.32 91.6 2
P SpliceT End 7.25 72.54 -0.00 -2.21 770.10 0.00 -0.0 4.92 116.50 0.00 0.33 397.34 3.12 0.00 397.70 99.4 2
P SpliceT Origin 7.25 72.54 -0.00 -2.21 770.10 0.00 -0.0 2.52 116.68 0.00 0.17 397.34 3.12 0.00 397.54 99.4 2
P SpliceB End 8.04 65.29 -0.00 -1.88 862.72 0.00 -0.0 2.52 116.68 0.00 0.13 340.93 2.37 0.00 341.08 85.3 2
P SpliceB Origin 8.04 65.29 -0.00 -1.88 862.72 0.00 -0.0 -0.61 116.88 0.00 -0.03 340.93 2.38 0.00 340.98 85.2 2
P Tube 2 End 9.56 52.52 -0.00 -1.34 1040.85 0.00 -0.0 -0.61 116.88 0.00 -0.03 363.46 2.23 0.00 363.51 90.9 2
P Tube 2 Origin 9.56 52.52 -0.00 -1.34 1040.85 0.00 -0.0 -4.22 117.05 0.00 -0.20 363.46 2.24 0.00 363.68 90.9 2
P Tube 2 End 11.09 41.25 -0.00 -0.92 1219.24 0.00 -0.0 -4.22 117.05 0.00 -0.19 378.93 2.11 0.00 379.14 94.8 2
P Tube 2 Origin 11.09 41.25 -0.00 -0.92 1219.24 0.00 -0.0 -7.96 117.18 0.00 -0.36 378.93 2.11 0.00 379.30 94.8 2
P Tube 2 End 12.61 31.46 -0.00 -0.61 1397.82 0.00 -0.0 -7.96 117.18 0.00 -0.34 389.14 2.00 0.00 389.49 97.4 2
P Tube 2 Origin 12.61 31.46 -0.00 -0.61 1397.82 0.00 -0.0 -11.81 117.25 0.00 -0.50 389.14 2.00 0.00 389.66 97.4 2
P Tube 2 End 14.14 23.10 -0.00 -0.38 1576.50 0.00 -0.0 -11.81 117.25 0.00 -0.48 395.39 1.89 0.00 395.88 99.0 2
P Tube 2 Origin 14.14 23.10 -0.00 -0.38 1576.50 0.00 -0.0 -15.03 117.26 0.00 -0.61 395.39 1.89 0.00 396.01 99.0 2
P Tube 2 End 15.09 18.58 -0.00 -0.27 1688.56 0.00 -0.0 -15.03 117.26 0.00 -0.59 397.73 1.84 0.00 398.33 99.6 2
P Tube 2 Origin 15.09 18.58 -0.00 -0.27 1688.56 0.00 -0.0 -17.56 117.26 0.00 -0.69 397.73 1.84 0.00 398.43 99.6 2
P SpliceT End 16.05 14.59 -0.00 -0.19 1800.62 0.00 -0.0 -17.56 117.26 0.00 -0.67 399.09 1.78 0.00 399.77 99.9 2
P SpliceT Origin 16.05 14.59 -0.00 -0.19 1800.62 0.00 -0.0 -21.43 117.27 0.00 -0.81 399.09 1.78 0.00 399.91 100.0 2
P SpliceB End 17.10 10.81 -0.00 -0.12 1923.62 0.00 -0.0 -21.43 117.27 0.00 -0.73 383.16 1.59 0.00 383.89 96.0 2
P SpliceB Origin 17.10 10.81 -0.00 -0.12 1923.62 0.00 -0.0 -26.26 117.24 0.00 -0.89 383.16 1.59 0.00 384.06 96.0 2
P Tube 3 End 18.62 6.38 -0.00 -0.05 2102.29 0.00 -0.0 -26.26 117.24 0.00 -0.85 381.22 1.52 0.00 382.08 95.5 2
P Tube 3 Origin 18.62 6.38 -0.00 -0.05 2102.29 0.00 -0.0 -30.81 117.10 0.00 -1.00 381.22 1.52 0.00 382.23 95.6 2
P Tube 3 End 20.14 3.15 -0.00 -0.02 2280.75 0.00 -0.0 -30.81 117.10 0.00 -0.95 378.12 1.45 0.00 379.08 94.8 2
P Tube 3 Origin 20.14 3.15 -0.00 -0.02 2280.75 0.00 -0.0 -35.48 116.92 0.00 -1.10 378.12 1.45 0.00 379.22 94.8 2
P Tube 3 End 21.67 1.08 -0.00 -0.00 2458.92 0.00 -0.0 -35.48 116.92 0.00 -1.05 374.13 1.39 0.00 375.19 93.8 2
P Tube 3 Origin 21.67 1.08 -0.00 -0.00 2458.92 0.00 -0.0 -39.62 116.72 0.00 -1.18 374.13 1.38 0.00 375.31 93.8 2
P Ground End 22.79 0.26 -0.00 -0.00 2589.78 0.00 -0.0 -39.62 116.72 0.00 -1.14 370.77 1.34 0.00 371.92 93.0 2
P Tube 3 Origin 22.79 0.26 -0.00 -0.00 2589.78 0.00 -0.0 -43.11 116.53 0.00 -1.24 370.77 1.34 0.00 372.02 93.0 2
P Fixity End 23.85 0.00 0.00 0.00 2713.21 0.00 -0.0 -43.11 116.53 0.00 -1.21 367.34 1.30 0.00 368.56 92.1 2
Summary of Clamp Capacities and Usages for Load Case "EXTREME WIND 310KPH":
*** Overall summary for all load cases - Usage = Maximum Stress / Allowable Stress
Pole Load Case Deflection Deflection Height Length Tip Allowable Actual Usage
Label Check Limit Diameter Deflection Deflection
% (m) (m) (cm) (m) (m) %
------------------------------------------------------------------------------------------------------
P EXTREME WIND 310KPH % Pole Height 10.00 23.85 26.00 37.50 2.38 1.57 65.74