Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SCRAPERS
Busak+ Shamban
1
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
2
contents (catalogue) main menu product range fullscreen/variable
Scrapers
Contents
TurconR ExcluderR 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TurconR ExcluderR 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Scraper DA17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Scraper DA24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Scraper WRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Scraper ASW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Scraper PW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Scraper WNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Scraper WNW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Scraper WRM/PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Scraper SWP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Metal Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Busak+ Shamban
3
contents (catalogue) main menu product range fullscreen/variable
Scrapers
Note on Ordering
All multi-element standard scrapers are generally sup-
plied as a complete set. The supply includes scraper and
energizing element. The 0-Ring does not have to be or-
dered separately. It is also possible, however, to use other
0-Ring materials from our 0-Ring Catalogue. In this case,
please order the scraper and 0-Ring separately.
Older designs of scrapers no longer contained in this
catalogue obviously continue to be available. When poss-
ible, however, for new applications we recommend the
use of DIN/ISO series listed in the catalogue.
The sizes contained in this catalogue are generally avail-
able from stock and can be supplied at short notice. We
reserve the right to modify our article structure without
prior notice.
Please do not hesitate to contact our Technical Depart-
ment for further information on specific applications and
special technical questions.
Busak+ Shamban
4
contents (catalogue) main menu product range fullscreen/variable
Scrapers
Technical Data*
Size Groove
S
Scraper A li i
Application S
Standard
d d A i
Action
Range Type Temp.
Speed Recom-
Range** mended
Scraper
Field of Application Material
Medium
Type Page
Heavy
Double
Light
Single
ISO/DIN mm mm oC
m/s
c ude
Excluder Heavy
eavy duty
du y mobile
ob e -45/ Turcon
5 andd industrial
i d i l 20 - 2600 +200 15 T46
hydraylics D Split <30
15 D D - X
Presses D Closed >30
D D -30/ Zurcon
Steel mills D D D 20 - 2200 2
+100 Z52
RSW
Scraper Mobile hydraulics D D D
DA 24 Construction
machineryy D D D -30/
41 A i l
Agriculture - 50 - 280 Cl d
Closed X 05
0.5 TPU
+80
machinery D D D
Scraper Agriculture
WRM machinery D D
Handling equipment D D -30/
45 - 12 - 260 Cl d
Closed X 1 NBR
+110
Scraper Agriculture
ASW machinery D D
Mobile hydraulic Split <14 -30/
51 - 8 - 125 X 1 TPU
machinery D D Closed >14 +80
* The data abowe are maximum values and cannot be used at the same time.
** Temperature Range is depending on choise of elastomer material.
Busak+ Shamban
5
contents (catalogue) main menu product range fullscreen/variable
Scrapers
Technical Data*
Size Groove
S
Scraper A li i
Application S
Standard
d d A i
Action
Range Type Temp.
Speed Recom-
Range mended
Scraper
Field of Application Material
Medium
Type Page
Heavy
Double
Light
Single
ISO/DIN mm mm oC
m/s
Scraper Agriculture
PW machinery D D
Mobile hydraulic -30/
57 - 4 - 280 Cl d
Closed X 1 TPU
machinery D D +80
Scraper Agriculture
WNE machinery D D D
Mobile hydraulic -30/
65 - 8 - 250 Cl d
Closed X 1 TPU
machinery D D D +80
Scraper Agriculture
WNW machinery D D D
Mobile hydraulic 6195 -30/
71 machinery 16 - 80 Cl d
Closed X 1 TPU
D D D Type A +80
ISO standard
cylinder D D D
Scraper Agriculture
WRM/C-SA machinery D D NBR
Standard hydraulic -30/
75 - 16 - 120 O
Open X 1 +
cylinder D D +110
Metal
Scraper Agriculture
WRM/PC machinery D D D
y
Mobil hydraulic -30/ TPU
81 machinery
hi - 16 - 175 O
Open X 1 +
D D D +80
Metal
WSA
Scraper Construction
SWP machinery D D TPU
Link pin seals D D -30/
85 - 25 - 190 O
Open X 1 +
+80
Metal
Metal Agriculture
machinery Metal
Wiper D D D
Mobile hydraulic +
-40/
91 machinery - 12 - 220 O
Open X 1 NBR
D D D +110
ISO standard +
cylinder Brass
D D D
* The data abowe are maximum values and cannot be used at the same time.
Busak+ Shamban
6
contents (catalogue) main menu product range fullscreen/variable
TURCON EXCLUDER 2
R R
- Double Acting -
- Rubber Energised Double-acting Scraper -
- Material -
- TurconR and ZurconR -
Busak+ Shamban
7
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
8
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 2
TurconR ExcluderR 2
The TurconR ExcluderR 2 is a double-acting scraper with Technical Data
two geometrically different scraper lips which are installed Speed: 15 m/s for TurconR materials
back-to-back. ExcluderR 2 is always installed together
with an elastic O-Ring in one groove. The scraper function Temperature: -45° C to +200° C
is performed by the ExcluderR 2. The O-Ring maintains (depending on O-Ring material)
the pressure of the scraper lips against the sliding surface
and can compensate any deflections of the piston rod. Media: Mineral oil-based hydraulic fluids,
flame retardant hydraulic fluids,
environmentally safe hydraulic fluids
(bio-oils), water, air and others,
depending on the O-Ring material.
O-Ring
Important Note:
The above data are maximum values and cannot
TurconR scraper ring be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
The following material combination has proven effective
Figure 1 TurconR ExcluderR 2
for most applications:
ExcluderR 2 has two functions: ExcluderR 2: TurconR T46
- Scrape contaminants from the retracting piston rod and O-Ring: NBR, 70 Shore A
thus to protect the system from soiling
For other applications, other material combinations as
- Hold back the residual oil film on the extending piston listed in Table III, may also be used.
rod on the medium side.
ExcluderR 2 are used in conjunction with the rod seal Design and Installation Instructions
TurconR StepsealR, i.e. seals with hydrodynamic back- ExcluderR 2 scrapers can be installed in split and closed
pumping function. grooves (installation dimensions, see table IV). Installation
in closed grooves is dependent on the rod diameter, pro-
Advantages file cross-section of the scraper and on the cord cross-sec-
- Outstanding sliding properties tion of the corresponding O-Ring, see Table II.
Busak+ Shamban
9
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 2
Busak+ Shamban
10
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 2
Installation Recommendation
r1
d2
60d
r max. 0.2
dN
min. 1.0
D4
a
D3
L3
Ordering Example
TurconR ExcluderR 2 with O-Ring, NBR Order No. WE31 00500 - T46 N
Rod diameter: dN = 50.0 mm
Series: WE31 (from Table IV) Series No.
Part No.: WE3100500 (from Table V)
Select the material from Table III. The corresponding code Rod diameter x 10*
numbers are appended to the Part No. (from Table V).
Together they form the Order No. Quality Index (Standard)
For all intermediate sizes not shown in Table V, the Order
No. can be determined from the example opposite. Material code (scraper)
*For diameters ≥ 1000.0 mm multiply only by factor 1. Material code (O-Ring)
Example WE35 for diameter 1200.0 mm.
Order no.: WE35X1200-T46N.
Busak+ Shamban
11
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 2
Busak+ Shamban
12
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 2
Busak+ Shamban
13
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 2
Busak+ Shamban
14
contents (catalogue) main menu product range fullscreen/variable
TURCON EXCLUDER 5
R R
- Double Acting -
- Rubber Energised Double-acting Scraper -
- Material -
- TurconR and ZurconR -
Busak+ Shamban
15
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
16
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 5
TurconR ExcluderR 5*
Description Technical Data
The TurconR ExcluderR 5 is a patented double-acting Speed: 15 m/s for TurconR materials
scraper with two geometrically different scraper lips which 2 m/s for ZurconR materials
are installed back-to-back. The scraper is installed to-
gether with an O-Ring as elastic energizing element in one Temperature: -45° C to +200° C (TurconR)
groove. The scraper function is performed by the Exclud- -30° C to +100° C (ZurconR)
erR 5. The O-Ring maintains the pressure of the scraper Media: Mineral oil-based hydraulic fluids,
lips against the sliding surface and can compensate flame retardant hydraulic fluids,
deflections of the piston rod. environmentally safe hydraulic fluids
(bio-oils), water, air and others,
depending on the scraper and
O-Ring material.
O-Ring
Important Note:
The above data are maximum values and cannot
TurconR scraper ring be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
The following material combination has proven effective
Figure 3 TurconR ExcluderR 5
for most applications:
ExcluderR 5 has two functions:
ExcluderR 5: TurconR T46
- Scrape contaminants from the retracting piston rod and
thus to protect the system from soiling O-Ring: NBR, 70 Shore A
- Hold back the residual oil film on the extending piston Set: T46N
rod on the medium side.
For other applications, other material combinations as
ExcluderR 5 are preferably used in conjunction with our
listed in Table VII, may also be used.
rod seal TurconR StepsealR, i.e. seals with a hydrodynam-
ic back-pumping function. In contrast to the ExcluderR 2, they
Design and Installation Instructions
are used particularly for heavy-duty applications such as
in construction machinery, presses, etc. ExcluderR 5 scrapers can be installed in split and closed
grooves (installation dimensions, see table VIII).
Advantages
Installation in closed grooves is dependent on the rod di-
- Outstanding sliding properties ameter, profile cross-section of the scraper and on the
- Stick-slip-free, no sticking (TurconR material) cross-section of the corresponding O-Ring, see Table VI.
- Tough scraper for heavy-duty operation
Table VI Installation in Closed Grooves
- Can compensate for deflections of the piston rod or
plunger
TurconR Rod O-Ring
- Very good scraping effect even against firmly adhered ExcluderR 5 Diameter Cross-Section
dirt, etc. Series No. dN d2
- Very good scraping effect from the inside against the re- WE50 > 30.0 2.62
sidual oil film adhering to the surface of the piston rod WE51 > 40.0 2.62
- Identical installation with that of the ZurconR ExcluderR WE52 > 70.0 3.53
500 WE53 > 100.0 5.33
- Very high resistance to hydraulic media WE54 > 140.0 7.00
- Available for all diameters up to 2.600 mm (TurconR), WE55 > 180.0 8.40
up to 2.200 mm (ZurconR).
* Patent No. EP 023 5568
Busak+ Shamban
17
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 5
Busak+ Shamban
18
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 5
Installation Recommendation
r1
d2
60d
r max. 0.2
min. 1.0
dN
a
D4
D3
L3
Ordering example
TurconR ExcluderR 5 with O-Ring in NBR
Rod diameter: dN = 50.0 mm Order No. WE51 00500 - T46 N
Series: WE51 (from Table VIII)
Part No.: WE5100500 (from Table IX)
Series No.
Select the material from Table VII. The corresponding
code numbers are appended to the Part No. (from Table Rod diameter x 10*
IX). Together they form the Order No.
For all intermediate sizes not shown in Table IX, the Order Quality Index (Standard)
No. can be determined from the example opposite.
*For diameters ≥ 1000.0 mm multiply only by factor 1. Material code (scraper)
Example WE55 for diameter 1200.0 mm.
Order no.: WE55X1200-T46N. Material code (O-Ring)
Busak+ Shamban
19
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 5
The rod diameters in bold type comply with the recommendations of ISO 3320.
Other dimensions and all intermediate sizes up to 2.600 mm diameter including imperial (inch) sizes can be supplied.
Busak+ Shamban
20
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 5
The rod diameters in bold type comply with the recommendations of ISO 3320.
Other dimensions and all intermediate sizes up to 2.600 mm diameter including imperial (inch) sizes can be supplied.
Busak+ Shamban
21
contents (catalogue) main menu product range fullscreen/variable
TurconR ExcluderR 5
Busak+ Shamban
22
contents (catalogue) main menu product range fullscreen/variable
- Double Acting -
- Rubber Energised-
- Flexible Double-acting Scraper -
- Material -
- ZurconR -
Busak+ Shamban
23
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
24
contents (catalogue) main menu product range fullscreen/variable
Materials
O-Ring Standard material:
ExcluderR 500: ZurconR Z05
ZurconR scraper ring Colour: Turquoise
O-Ring: NBR, 70 Shore A
Set: Z05N
Busak+ Shamban
25
contents (catalogue) main menu product range fullscreen/variable
Installation Recommendation
r1
d2
60d
r max. 0.2
dN
min. 1.0
D4
a
D3
L3
Ordering Example
ZurconR Excluder 500R with O-Ring Order No. WEP1 00500 - Z05 N
Rod diameter: dN = 50.0 mm
Series: WEP1 (from Table X) Series No.
Part No.: WEP100500 (from Table XI)
Materials: ExcluderR of ZurconR Z05 Rod diameter x 10
O-Ring of NBR 70 Shore A
Quality Index (Standard)
Busak+ Shamban
26
contents (catalogue) main menu product range fullscreen/variable
The rod diameters in bold type comply with the recommendations of ISO 3320.
Other dimensions on request.
Busak+ Shamban
27
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
28
contents (catalogue) main menu product range fullscreen/variable
- Double Acting -
- Material -
- Rubber -
Busak+ Shamban
29
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
30
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 17
Scraper DA 17
Description
Important Note:
The scraper DA 17 is a moulded double-acting elastomer The above data are maximum values and cannot
scraper. It has two geometrically different scraper lips. be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Material
Standard material: NBR, 90 Shore A
Ordering Example
Scraper DA 17
Rod diameter: dN = 50.0 mm
Part No.: WD1700500 (from Table XII)
Material: Standard material
NBR 90 Shore A, Code N9
Figure 7 Scraper DA 17
Technical Data
Speed: up to 1 m/s
Temperature: -30° C to +110° C
Media: Mineral oil-based hydraulic fluids,
flame retardant hydraulic fluids
(HFA, HFB, HFC),
water, air, etc.
Busak+ Shamban
31
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 17
Installation Recommendation
dN
D4
a
D3
B L3
Busak+ Shamban
32
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 17
Busak+ Shamban
33
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 17
Busak+ Shamban
34
contents (catalogue) main menu product range fullscreen/variable
- Double Acting -
- Material -
- Polyurethane -
Busak+ Shamban
35
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
36
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 22 - RSW
The scraper lip is designed in a particular way that it relia- Seal side: Pressures up to 2 MPa (20 bar)
bly scrapes off the dirt but leaves a residual oil film on the a relief bore must be provided with
rod, which is required for correct operation. The radial higher pressures
squeeze is sufficient to remove particles, dust and water. Speed: Up to 1 m/s
The scraping lip facing inwards is designed in a way that Temperature: -30°C to +80°C
it assumes a sealing function even under low pressure.
The static seal is achieved by a tight radial fit between the Media: Mineral oils and greases
scraper body and the groove.
Groove type: Closed
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Standard application:
Polyurethane: 93 Shore A
Sealing Parts code: WU9L3 blue color
Figure 9 Scraper DA 22 - RSW
Busak+Shamban code: WUAQ3 turquoise
Advantages
- Good scraping effect
- Wear resistant, long service life
- Retaining residual oil film
- Standard elements for standardized installation grooves
(DA 22)
Application Examples
Due to their outstanding wiping capacities, DA22 - RSW
scrapers are recommended wherever there are dusty and
humid conditions and especially for the following applica-
tions:
S ISO standard cylinders
S Hydraulic industrial cylinders
S Agriculture machinery
Busak+ Shamban
37
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 22 - RSW
Installation Recommendation
dN
D4
min. 2
D3
L3
The sizes in bold type comply with ISO 6195. installation groove Type C. Other sizes on request.
Up to 18 mm diameter we recommend a split groove. The listed products are technically equivalent but availability and pricing may vary.
Busak+ Shamban
38
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 22 - RSW
The sizes in bold type comply with ISO 6195. installation groove Type C. Other sizes on request.
Up to 18 mm diameter we recommend a split groove. The listed products are technically equivalent but availability and pricing may vary.
Busak+ Shamban
39
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 22 - RSW
The sizes in bold type comply with ISO 6195. installation groove Type C. Other sizes on request.
Up to 18 mm diameter we recommend a split groove. The listed products are technically equivalent but availability and pricing may vary.
Ordering Example
Rod diameter: dN = 36 mm
Groove diameter: D3 = 44 mm (see example 1)
D3 = 44.6 mm (see example 2)
Example 1 Example 2
Part number: WD2200360 Part number: WD2210360
Material Code: WUAQ3 Material Code: WU9L3
Sealing Parts Ref. No.: Not available Sealing Parts Part No.: RSW36
B+S Ref. No.: Not available
Order No. WD22 0 0360 - WUAQ3 Order No. WD22 1 0360 - WU9L3
Series No. Series No.
Material-code Material-code
Busak+ Shamban
40
contents (catalogue) main menu product range fullscreen/variable
B+S DA 24
- Double-acting -
- Material -
- Polyurethane -
Busak+ Shamban
41
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
42
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 24
Scraper DA 24
Description Application examples
The scraper DA24 is a double-acting scraper of The scraper DA 24 is especially suitable for application in:
polyurethane for severe operating conditions and heavy
attack of dirt. S Construction machinery
S Agriculture- and forestry machinery
S Mobile hydraulic
S High attack of dirt
S Side steering of piston rod
Scraper DA24 is especially used in connection with our
Rod Seals TurconR StepsealR, ZurconR Rimseal.
Technical Data
Operating conditions:
Pressure: max. 5 MPa
Speed: up to 0.5 m/s
Figure 11 Scraper DA 24 at high strokes and higher speed,
please contact your local
The special design of the inward-facing sealing lip Busak+Shamban company
contributes to an optimum contact pressure resulting in a
very high scraper effect of the residual oil film.
Temperature: -30°C to +80°C
The outward-facing scraper lip leans against the housing.
This ensures an optimum sealing force and further it Media: Mineral oil-based hydraulic fluids
prevents the penetration of dirt and water across the
groove bottom. Also at heavy attacks of dirt and side Important Note:
steering of the piston rod the scraper effect remains The above data are maximum values and cannot
stable. The material polyurethane ensures a high service be used at the same time. e.g. the maximum
life, also at heavy requirements, and it is proof against operating speed depends on material type,
installation damage. pressure, temperature and gap value.
Advantages
Material
- Very good scraper effect of the outward lip
The scraper DA24 consists of a thermoplastic polyurethane
- Very good sealing effect of the inward lip material with high wearability, low deformation and high
resistance to extrusion.
- Reliable at side steering of the piston rod
Polyester-Polyurethane: WUAQ3
- Sturdy and wear-resistant
- Simple installation 93 Shore A
Busak+ Shamban
43
contents (catalogue) main menu product range fullscreen/variable
Scraper DA 24
Installation Recommendation
r1
60d
r 0.5
r 0.3
dN
a1
D4
a
D3
L3
Busak+ Shamban
44
contents (catalogue) main menu product range fullscreen/variable
POLYPAC WRM
R
- Single Acting -
- Material -
- NBR Elastomer -
Busak+ Shamban
45
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
46
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM
Scraper WRM
Description Technical Data
Scraper rings are essential components of any hydraulic Operating conditions
or pneumatic equipment.
Speed: Up to 1 m/s
These are protection components for axial moving rods:
they ensure that foreign matter is not introduced into the Temperature: -30° C to +110° C
system, avoiding costly wear and damage to all the inter- Media: Mineral oil based hydraulic fluids,
nal components including seals. polyglycol-water emulsions, water-oil
WRM scrapers are manufactured in nitrile elastomer with emulsions
precision machined wiper lip, which produces a very ef- Groove type: Closed
fective wiping action.
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Standard application:
Nitrile elastomer NBR 90 Shore A
Material code: N9T60
Figure 13 Scraper WRM Polypac Ref. code: 2790
- Easy installation and removal without tools Polypac ref.: WRM 157188
Application Examples
Due to their outstanding wiping capacities WRM scrapers Order No. WAP0 0 0400 - N9T60
are recommended wherever there are dusty and humid
Series No.
conditions and especially for the following applications:
S Valve spindles Type (Standard)
S Slide valves
Rod diameter x 10
S Hydraulic cylinders
S Agriculture machinery Quality Index
Material code
Busak+ Shamban
47
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM
Installation Recommendation
r = 1.0
dN
L3
D4
D3
Figure 14 Installation drawing
Busak+ Shamban
48
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM
Busak+ Shamban
49
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM
Busak+ Shamban
50
contents (catalogue) main menu product range fullscreen/variable
- Single Acting -
- Material -
- Polyurethane -
Busak+ Shamban
51
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
52
contents (catalogue) main menu product range fullscreen/variable
Scraper ASW
Scraper ASW
Description Material
The scraper ASW is a single-acting polyurethane scraper. The standard material is a wear resistant polyurethane.
Standard material: Polyurethane, 93 Shore A
Material No. WUAQ3
Ordering Example
Scraper ASW
Rod diameter: dN = 50.0 mm
Part No.: WSW000500 (from Table XVI)
Material: WUAQ3
Series No.
Figure 15 Scraper ASW
Type (Standard)
The special feature of this scraper is an additional support-
ing bead on the inner surface. It prevents tilting or twisting
Rod diameter x 10
of the scraper in the groove. At the same time this support
improves the firm seating in the groove, thus preventing the Quality Index
penetration of impurities via the back of the scraper. This
represents a technical improvement compared with similar
Material code
scraper types.
Advantages
- Simple groove design
- Very good scraping effect, wear resistant
- No tilting or twisting in the groove
- Simple installation
- Flush fitting with the outer surface
Technical Data
Speed: Up to 1 m/s
Temperature: -30°C to +80°C
Media: Mineral oil-based
hydraulic fluids.
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Busak+ Shamban
53
contents (catalogue) main menu product range fullscreen/variable
Scraper ASW
Installation Recommendation
r max. 0.4
dN
a
D4
B L3
D3
Figure 16 Installation drawing
Busak+ Shamban
54
contents (catalogue) main menu product range fullscreen/variable
Scraper ASW
Busak+ Shamban
55
contents (catalogue) main menu product range fullscreen/variable
Scraper ASW
Busak+ Shamban
56
contents (catalogue) main menu product range fullscreen/variable
SEALING PARTS PW
- Single Acting -
- Dynamic + Static Sealing Lip -
- Material -
- Polyurethane -
Busak+ Shamban
57
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
58
contents (catalogue) main menu product range fullscreen/variable
Scraper PW
Scraper PW
Description Technical Data
These scrapers are manufactured in polyurethane. The Operating conditions
static sealing lip ensures against the intrusion of dirt and
fluids over the outer diameter. Speed: Up to 1 m/s
Temperature: -30° C to +80° C
Media: Mineral oil based hydraulic fluids
Groove type: Closed
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Figure 17 Scraper PW Polyurethane: 93 Shore A
The scraper PW has no interference at the outside diam- Sealing Parts code: WU9L3 blue color
eter and can have a radial movement due rod deviations.
Ordering Example
Advantages
Rod diameter: dN = 45 mm
- High wear resistance
Groove diameter: D3 = 53.6 mm
- Good prevention against external fluid intrusion
Part number: WNP000450
- Compensation of radial rod excursion
Material code: WU9L3
- Easy installation
Sealing Parts Ref.: PW 45
- Space-saving construction
Quality Index
Material code
Busak+ Shamban
59
contents (catalogue) main menu product range fullscreen/variable
Scraper PW
Installation Recommendation
r = 1.0
dN
L3
D4
D3
Figure 18 Installation drawing
Busak+ Shamban
60
contents (catalogue) main menu product range fullscreen/variable
Scraper PW
Busak+ Shamban
61
contents (catalogue) main menu product range fullscreen/variable
Scraper PW
Busak+ Shamban
62
contents (catalogue) main menu product range fullscreen/variable
Scraper PW
Busak+ Shamban
63
contents (catalogue) main menu product range fullscreen/variable
Scraper PW
Busak+ Shamban
64
contents (catalogue) main menu product range fullscreen/variable
B+S WNE
- Single Acting -
- Dynamic + Static Sealing Lip -
- Material -
- Polyurethane -
Busak+ Shamban
65
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
66
contents (catalogue) main menu product range fullscreen/variable
Scraper WNE
Scraper WNE
Description Technical Data
These scrapers are manufactured in polyurethane. The Operating conditions
static sealing lip ensures against the intrusion of dirt and
fluids over the outer diameter. Speed: Up to 1 m/s with
Temperature: -30° C to +80° C
Media: Mineral oil based hydraulic fluids
Groove type: Closed
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Figure 19 Scraper WNE Polyurethane: 93 Shore A
The scraper WNE has an interference to the groove out- WNE material code: WUAQ3 turquoise
side diameter.
Ordering Example
Advantages
For WNE scrapers
- High wear resistance
Rod diameter: dN = 45 mm
- Good prevention against external fluid intrusion
Groove diameter: D3 = 53.6 mm
- Easy installation
Part number: WNE000450
- Space-saving construction
Material code: WUAQ3
Application Examples
These scrapers are recommended wherever there are
dusty and humid conditions and especially for the follow- Order No. WNE0 0 0450 - WUAQ3
ing applications:
Series No.
S Mobile hydraulic machinery
Type (Standard)
S Agriculture machinery
Rod diameter x 10
Quality Index
Material code
Busak+ Shamban
67
contents (catalogue) main menu product range fullscreen/variable
Scraper WNE
Installation Recommendation
r = 1.0
dN
L3
D4
D3
Figure 20 Installation drawing
Busak+ Shamban
68
contents (catalogue) main menu product range fullscreen/variable
Scraper WNE
Busak+ Shamban
69
contents (catalogue) main menu product range fullscreen/variable
Scraper WNE
Busak+ Shamban
70
contents (catalogue) main menu product range fullscreen/variable
B+S WNW
- Single Acting -
- Additional Static Sealing Lip -
- Additional Supporting Bead -
- Material -
- Polyurethane -
Busak+ Shamban
71
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
72
contents (catalogue) main menu product range fullscreen/variable
Scraper WNW
Scraper WNW
Description Technical Data
WNW are polyurethane manufactured lipped wipers for Operating conditions
the protection of cylinders against dirt. The static sealing
lip and edge respectively ensure against the intrusion of Speed: Up to 1 m/s
dirt and fluids over the outer diameter. The support on the Temperature: -30° C to +80° C
reverse side of the wiper prevents it from twisting.
Media: Mineral oil based hydraulic fluids
Groove type: Closed
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Standard application:
Figure 21 Scraper WNW Polyurethane: 93 Shore A
Material Code: WUAQ3
Advantages
- High wear resistance Ordering Example
- Very good static sealing performance due to additional Rod diameter: dN = 40 mm
seal lip at the housing Groove diameter: D3 = 48 mm
- Stable position of scraper in the housing Part number: WNW000400
- Support bead with notches prevent pressure built up Material Code: WUAQ3
between scraper and seal
- Housings in accordance to ISO 6195 type A
Order No. WNW0 0 0400 - WUAQ3
Application Examples
Series No.
Thanks to their outstanding wiping capacities WNW
scrapers are recommended wherever there are dusty and Type (Standard)
humid conditions and especially for the following applica-
tions: Rod diameter x 10
S Mobile hydraulic machinery
Quality Index (see table)
S ISO-standard cylinders application
S Agriculture machinery Material-code
S Lift trucks
S Cargo tailboards
Busak+ Shamban
73
contents (catalogue) main menu product range fullscreen/variable
Scraper WNW
Installation Recommendation
r = 0.3
r = 0.5
L3
dN
D4
L1
D3
sharp edge
Busak+ Shamban
74
contents (catalogue) main menu product range fullscreen/variable
POLYPACR WRM/C
B+S SA
- Single Acting -
- With Metal Case -
- For open Groove Assembly -
- Material -
- NBR and Metal -
Busak+ Shamban
75
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
76
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM/C - SA
Scraper WRM/C - SA
Description
Important Note:
WRM/C and SA are mould-vulcanised single-acting elas- The above data are maximum values and cannot
tomer scrapers, with integral metal reinforcement for be used at the same time. e.g. the maximum
open groove assembly. In conjunction with the scraper operating speed depends on material type,
oversize, an exact fit is obtained in the housing. pressure, temperature and gap value.
Materials
Standard application:
Material: NBR 90 Shore A + Metal
B+S code: N9MN
Polypac code: 4N7W
Ordering Example
Rod diameter: dN = 35 mm
Groove diameter: D3 = 45 mm
Part number: WSA000350
Figure 23 Scraper WRM/C + WSA
Material set code:
Polypac: 4N7W
Advantages B+S: N9MN
- Space-saving construction
- Low cost, economical solution
Order No. WSA0 0 0350 - N9MN
- Simple, easy-construction groove
Series No.
- Firm fit in the groove due to metallic press fit
Type (Standard)
Application Examples
S Hydraulic cylinders Rod diameter x 10
S Agriculture machinery Quality Index (see table)
S Construction machinery
S Lift trucks Material Set-code
S Mobile hydraulic
Technical Data
Order No. WSA0 0 0350 - 4N7W
Operating conditions
Series No.
Speed: Up to 1 m/s
Temperature: -30° C to +110° C Type (Standard)
Busak+ Shamban
77
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM/C - SA
Installation Recommendation
45 d x 0.5
L3
dN
D3
Figure 24 Installation drawing
Busak+ Shamban
78
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM/C - SA
Busak+ Shamban
79
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM/C - SA
Busak+ Shamban
80
contents (catalogue) main menu product range fullscreen/variable
POLYPAC WRM/PC
R
- Single Acting -
- With Metal Case -
- For open Groove Assembly -
- Material -
- Polyurethane + Metal -
Busak+ Shamban
81
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
82
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM/PC
Scraper WRM/PC
Description Technical Data
WRM/PC are polyurethane manufactured lipped wipers Speed: Up to 1 m/s
with integrated metal reinforcement for open groove as-
sembly. These are typically used in medium duty applica- Temperature: -30° C to +80°C
tions where there is abrasion due to solid matter on rod Media: Mineral oil based hydraulic fluids
surface.
Groove type: Open
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Standard application:
Polyurethane: 94 Shore A red
Figure 25 Scraper WRM/PC Metal case: non alloyed steel
DIN 1624
Advantages Material Set-Code 4U1W
- Space-saving construction
Ordering Example
- High wear resistance
Rod diameter: dN = 40 mm
- Simple, easy-construction groove
Groove diameter: D3 = 50 mm
- Firm fit in the groove due to metallic press fit
Part number: WSP0 P 0400 -
- Accurate closure at the cylinder head
Material Code: 4U1W
Application Examples
Polypac ref.: WRM 157196/PC
Due to their outstanding wiping capacities WRM/PC
scrapers are recommended wherever there are dusty and
humid conditions and especially for the following applica- Order No. WSP0 P 0400 4U1W
-
tions:
Series No.
S Mobile hydraulic machinery
S Agriculture machinery Type (Standard)
S Construction machinery
S Lift trucks Rod diameter x 10
Material Set-code
Busak+ Shamban
83
contents (catalogue) main menu product range fullscreen/variable
Scraper WRM/PC
Installation Recommendation
30 d x 0.5
L3
dN
D3
Figure 26 Installation drawing
Busak+ Shamban
84
contents (catalogue) main menu product range fullscreen/variable
POLYPAC SWP
R
- Single Acting -
- Metal Reinforcement -
- For open Groove Assembly -
- Material -
- Polyurethane + Metal -
Busak+ Shamban
85
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
86
contents (catalogue) main menu product range fullscreen/variable
Scraper SWP
Scraper SWP
Description Technical Data
SWP are polyurethane manufactured lipped wipers with Operating conditions
integrated metal reinforcement for open groove assem-
bly. These are typically used in severe applications where Speed: Up to 1 m/s
there is abrasion due to solid matter on rod surface. Temperature: -30° C to +80°C
Media: Mineral oil based hydraulic fluids
Groove type: Open
Important Note:
The above data are maximum values and cannot
be used at the same time. e.g. the maximum
operating speed depends on material type,
pressure, temperature and gap value.
Materials
Standard application:
Figure 27 Scraper SWP
Polyurethane: 94 Shore A red
Advantages Metal case: non alloyed steel
- Space-saving construction DIN 1624
- Simple small installation groove Material Set-Code 4U1W
- Firm fit in the groove due to metallic press fit
Ordering Example
- At regreasing of drag bearing, the scraper lip opens at Rod diameter: dN = 40 mm
low overpressure; old grease can escape
Groove diameter: D3 = 50 mm
- High wear resistance
Part number: WSP0 0 0400 -
Application Examples
Material Set-Code: 4U1W (standard)
Due to their outstanding wiping capacities SWP scrapers
are recommended wherever there are dusty and humid Polypac ref.: SWP 4050
conditions and especially for the following applications:
S Mobile hydraulic machinery Order No. WSP0 0 0400 4U1W
-
S Construction machinery
S Link pin seals Series No.
S Lift trucks Type (Standard)
S Truck cargo cranes
S Agriculture machinery Rod diameter x 10
Material Set-code
Busak+ Shamban
87
contents (catalogue) main menu product range fullscreen/variable
Scraper SWP
Installation Recommendation
30 d
L3
dN
D3
Figure 28 Installation drawing
Busak+ Shamban
88
contents (catalogue) main menu product range fullscreen/variable
Scraper SWP
Busak+ Shamban
89
contents (catalogue) main menu product range fullscreen/variable
Scraper SWP
Busak+ Shamban
90
contents (catalogue) main menu product range fullscreen/variable
METAL SCRAPER
- Single Acting -
- Metal and Elastomer Scraper Lips -
- Material -
- NBR, Metal and Brass -
Busak+ Shamban
91
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
92
contents (catalogue) main menu product range fullscreen/variable
Metal Scraper
Metal Scraper
Description Technical Data
The metal scraper is a single-acting special scraper with Speed: Max. 1 m/s with
two different scraper lips - a thin metallic lip and a elasto- reciprocating movements
mer lip. The two scraper lips are arranged in tandem be-
hind one another in a compact metal housing. Temperature: -40°C to +120°C
Media: Mineral oil-based hydraulic fluids,
flame retardant hydraulic fluids
(HFA, HFB, HFC),water, air, etc.
Important Note:
Metallic lip The above data are maximum values and cannot
be used at the same time. e.g. the maximum
Elastomer lip operating speed depends on material type,
pressure, temperature and gap value.
Materials
Inner scraper lip:
Figure 29 Metal scraper NBR, 70 Shore A
Code N7
The metal scraper lip is designed to remove firmly adher-
ing soiling and ice particles. The secondary lip of elasto- Metal housing: Sheet metal 1.0204 (AISI 1008)
mer material enhances the overall scraping effect, i.e. fine or similar
sand grains, water and similar foreign matter are reliably Code M
scraped off. Both scraper lips have a smaller diameter
than the nominal diameter of the piston rod, thus ensuring Outer scraper lip: Brass
a tight fit of the scraper lips. The metallic lip is guided flexi- Code S
bly in radial direction and can easily follow any possible Other materials for scraper lips and housing available on
deflections of the piston rod. request. Also available in an imperial (inch) size range.
Advantages
- Very good scraping effect, even with firmly adhering
dirt, e.g. mud, ice
- Very abrasion resistant
- Tight fit in the groove due to the metal case
- Easy installation in open grooves
Busak+ Shamban
93
contents (catalogue) main menu product range fullscreen/variable
Metal Scraper
Installation Recommendation
r max. 0.4
B
30d
dN
D3
a
L3
Busak+ Shamban
94
contents (catalogue) main menu product range fullscreen/variable
Metal Scraper
Ordering Example
Metal scraper
Rod diameter: dN = 80.00 mm
Groove diameter: D3 = 96.00 mm Order No. WM01 00800 - N7 M S
Groove width: L3 = 8.50 mm
Part No.: WM0100800 (from Table XXIII) Series No.
Material: Standard materials
Material code N7MS Rod diameter x 10
Busak+ Shamban
95
contents (catalogue) main menu product range fullscreen/variable
Metal Scraper
Busak+ Shamban
96
contents (catalogue) main menu product range fullscreen/variable
NON STANDARD
SCRAPERS
Busak+ Shamban
97
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
98
contents (catalogue) main menu product range fullscreen/variable
PolypacR TWP
The scraper TWP are polyurethane manufactured double
lip with integrated metal reinforcement for open groove
assembly. These are typically used in heavy duty
applications like excavators and earth moving machine.
PolypacR UWR/PC
The UWR/PC is double-acting polyurethane wiper with
integrated metal reinforcement for open groove
assembly. The double lip guaranties a reliable scraper
effect in one side and the sealing function of the oil film
on the other.
PolypacR WRS
The WRS is a medium to heavy duty single acting wiper,
manufactured in nitrile elastomer with precision
machined wiper lip. A feature of this wiper ring is the
raised bead moulded around the base of the ring which
forms a ”line” seal to prevent liquids or semi liquids
seeping into the cylinder via the underside of the seal.
Busak+ Shamban
99
contents (catalogue) main menu product range fullscreen/variable
Busak+ Shamban
100