Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Each sDXC4 unit provides 4 x E1 physical When AAA servers are available, RADIUS
interfaces for traffic with support for up to 15 can be used for centralised user access
such units per sDXC node allowing the node management. Multiple servers are
to support a fully non-blocking 60 x E1 cross supported enabling administrators to
connect at an Nx8K granularity. implement their corporate security policies
to meet statutory obligations associated
Reliability through Modularity with the protection of Critical Infrastructure
With the sDXC’s distributed architecture, should against cyber threats.
an interface unit malfunction, only the cross
connects associated with the failed interface unit Standards compliant performance
will be affected allowing the rest of the node to monitoring, numerous loopbacks, statistics
continue operating. and diagnostics on E1 and Ethernet
interfaces are available to facilitate fault
Synchronisation management and isolation.
The sDXC offers a number of node and network
synchronisation options necessary to implement
high availability critical networks. Multiple
timing inputs and timing priority lists are
available so that should the preferred input
timing reference to a node fail, alternate sources Technical Highlights
can be activated in a prioritised manner. The sDXC System
sDXC also supports the distribution and usage • Supports up to 15 x sDXC4 Interface
of timing status over timeslot 0 to support loop Units providing a 60 x E1 cross
and mesh type applications. connection capability
• Extensive Nx64K/8K cross connect and
branching capabilities
Protected Connections • Extensive protection features
The sDXC supports protected services • Serial Data Summing/Conferencing
(Y-branching) whereby two different routes • Voice Summing/Conferencing
through the transmission network can be • Interoperable with third party
established and protected conditionally based multiplexer products including Nokia
on incoming pilot bits. These pilot bits can be Dynanet DB2/ DB2LP/DN2/DM2/DM2+
transported over any bit in any timeslot or via and FMX
CAS. • RADIUS for AAA support
• Alarm & Event logging via Syslog
• Manageable via SSHv2, Q1, Telnet,
Data & Voice Summing
SNMP V1/V2C/V3 & ASPeCT
The sDXC also support summing & conferencing
functions whereby a number of voice or data sDXC4 Interfaces
channels can be summed/conferenced together • 4 x G.704/2M Balanced (120 Ω) or
to support point-to-multipoint applications. Unbalanced (75 Ω)
• Q1 MI/DI with Data Hybrid (V.11)
Configuration, Monitoring & Alarms with • RS-232 console RJ45
Security • 2 x 10/100 Ethernet on single RJ45 for
The sDXC can be managed using the Q1 management
D14021401 Revision 9
sDXC4-75 Ω
protocol via the physical V.11 ports or remotely • 4 x Ethernet WAN directions per sDXC-4
Interface Unit of
using timeslot 0 overhead bits or over any Interface Unit for management channel
distribution the sDXC node
dedicated timeslot. Alternately, where an
• Measurement port or Sync In/Out via
Ethernet based Management DCC is available, SMB
the node can be managed using SSHv2, Telnet • -20 to +65 °C operation
and SNMP.
Technical Specifications
Model Order Code
P61411.01 sDXC-4-120 Single slot card 120Ω Euro Connector
P61411.02 sDXC-4-75 Single slot card 75Ω SMB Connectors
Related Mechanics & Power Interface Units
P61000.01 DYF-SR-19-16 DynaFlex 16 Slot Subrack
P61005.01 DYF-PIU-DC DynaFlex -20 to -72VDC Power Interface Unit
P61006.01 DYF-PIU-AC DynaFlex AC Power Interface Unit
Mechanical (Excluding handle) Power
Height-Depth-Width sDXC-4 233 x 160 x 25mm Power Supply -20 to -72 VDC
Power Consumption 12 W (Max.) 9 W Typical
Interfaces DXC-4 Alarm Reporting
4 x E1 ports G.703/G.704 2M 75/120Ω Front panel LED Major (red) Minor (yellow)
A, B and D alarm reported to
Ethernet (management) 2 x 10/100BASE-T (single bus for relay contact activation
RJ45 connector - switched) on PIU
Security
Measurement Out or 1 x SMB connector 75Ω Data Interfaces Dedicated VLAN
Sync In or Sync Out Management Password Protection
Regional Distributor
Head Office
1/45 Normanby Road,
Notting Hill, Victoria 3168
Australia N13071
Tel: +61 3 95400330
Fax:+61 3 99236545
www.avaratechnologies.com
This publication is issued to provide information only which (unless agreed by Avara Technologies Pty. Ltd. in writing) may not be used, applied or reproduced for any purpose or
form part of any order or contract or be regarded as a representation relating to the products or services concerned. Avara Technologies reserves the right to alter without notice
the specification, design, price or conditions of supply of any product or service. © Avara Technologies Pty. Ltd. 2013