Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DEMANDS
Description Ru Pu Load type
kN kN
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. Max. Sta. References
End plate
Length [mm] 175.00 99.82 199.64 p. 10-49
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
Beam
Welds rupture [kN/m] 1992.25 763.34 LC-32-31 0.38 p. 9-5
Support
Welds rupture [kN/m] 3352.04 360.90 LC-32-31 0.11 p. 9-5
NOTATION
Ag : Gross area
Aw : Effective area of the weld
d : Nominal bolt diameter
dcb : Bottom cope depth
dct : Top cope depth
D : Number of sixteenths of an inch in the weld size
Dmin : Number of sixteenths of an inch in the minimum weld size
FEXX : Electrode classification number
Fu : Specified minimum tensile strength
Fw : Nominal strength of the weld metal per unit area
Fy : Specified minimum yield stress
HasWeldsOnBothSides : Has welds on both sides
kBot : Outside corner radius of the bottom flange
kTop : Outside corner radius of the top flange
L : Length
Lmax : Maximum length
Lmin : Minimum length
Lp : Plate length
L : Length of weld
P : Required axial force
: Design factors
Rn : Design or allowable strength
Rn : Nominal strength
Ru : Required strength
tp : Thickness of the connected material
T : Clear distance between web fillets
tp : Plate thickness
wmax : Maximum weld size required
wmin : Minimum weld size required
w : Weld size