Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
A.0
Selected Answer: a.
Infinity
Answers: a.
Infinity
b.
Indeterminate
c.
1
• Question 5
0 out of 3.3 points
The themodynamic cycle used in a thermal power plant is
Selected Answer: a.
Joule
Answers: a.
Joule
b.
Ericson
c.
Bryton
d.
Rankine
• Question 6
0 out of 3.3 points
Which of the following is the Stefan – Boltzmann constant?
Selected Answer: a.
7.67 x 10-9 W/m2K4
Answers: a.
7.67 x 10-9 W/m2K4
b.
5.77 x 10-7 W/m2K4
c.
5.67 x 10-8 W/m2K4
d.
4.78 x 10-10 W/m2K4
• Question 7
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: a.
Increasing temperature
Answers: a.
Increasing temperature
b.
Increasing and decreasing temperature
c.
Constant temperature
d.
Decreasing temperature
• Question 8
0 out of 3.3 points
Dirt or gum in fuel nozzle or jets can produce:
Selected Answer: a.
Lack of engine power
Answers: a.
Lack of engine power
b.
Smoky black exhaust
c.
White exhaust
d.
Excessive fuel consumption
• Question 9
0 out of 3.3 points
Equation of state for a single component can be any of the following except:
Selected a.
Answer: the ideal gas law
Answers: a.
the ideal gas law
b.
any relationship interrelating 3 or more state functions
c.
a mathematical expression defining a path between states
d.
relationship mathematically interrelating thermodynamics
properties of the material
• Question 10
0 out of 3.3 points
When the expansion or compression of gas takes place without transfer of heat
to or from the gas, the process is called:
Selected Answer: [None Given]
Answers: a.
Adiabatic process
b.
Isothermal process
c.
Isometric process
d.
Isobaric process
• Question 11
0 out of 3.3 points
A substance that is homogeneous in composition and homogeneous and invariable
in chemical aggregation
Selected Answer: [None Given]
Answers: a.
simple substance
b.
water
c.
pure substance
d.
vapor
• Question 12
0 out of 3.3 points
The force of gravity on unit in volume is
Selected Answer: [None Given]
Answers: a.
Density
b.
Specific weight
c.
Specific volume
d.
Specific gravity
• Question 13
0 out of 3.3 points
The temperature of a pure substance at a temperature of absolute zero is:
Selected Answer: [None Given]
Answers: a.
100
b.
Unity
c.
Zero
d.
Infinity
• Question 14
0 out of 3.3 points
When not in use, the self-discharge of an automobile battery in dry weather is
generally:
Selected Answer: [None Given]
Answers: a.
0.5 to 1%
b.
5 to 7.5%
c.
3 to 5%
d.
Not more than 10%
• Question 15
0 out of 3.3 points
What fuel gas obtained by the destructive distillation of soft coal
Selected Answer: [None Given]
Answers: a.
Gas scrub
b.
Water gas
c.
Alcogas
d.
Coal gas
• Question 16
0 out of 3.3 points
A fur coat on an animal will help the animal to remain;
Selected Answer: [None Given]
Answers: a.
Warm in winter
b.
Warm in summer
c.
Cool in summer
d.
Cool in winter
• Question 17
0 out of 3.3 points
All of the following are components of a chemical elements except:
Selected Answer: [None Given]
Answers: a.
Electrons
b.
Protons
c.
Neutrons
d.
Ions
• Question 18
0 out of 3.3 points
A body that is hot compared to its surroundings illuminates more energy that it
receives, while it surrounding absorbs more energy than they give. The heat
transferred from one to another by energy wave motion. What is this mode of
heat transfer?
Selected Answer: [None Given]
Answers: a.
Radiation
b.
conduction
c.
condensation
d.
convection
• Question 19
0 out of 3.3 points
The solid – liquid equilibrium of Platinum is at what temperature?
Selected Answer: [None Given]
Answers: a.
3073°C
b.
3730°C
c.
3037°C
d.
3370°C
• Question 20
0 out of 3.3 points
Piston rings are made of:
Selected Answer: [None Given]
Answers: a.
Cast iron
b.
Alloy steel
c.
Copper
d.
Carbon steel
• Question 21
0 out of 3.3 points
Based on the first law of thermodynamics, which of the following is wrong?
Selected [None Given]
Answer:
Answers: a.
The heat transfer cannot exceed the work done
b.
The net heat transfer equal the net work of the cycle
c.
The heat transfer equals the work plus energy change
d.
The net heat transfer equals the energy change if no work is
done
• Question 22
0 out of 3.3 points
What is the most efficient thermodynamics cycle?
Selected Answer: [None Given]
Answers: a.
Rankine
b.
Carnot
c.
Brayton
d.
Diesel
• Question 23
0 out of 3.3 points
A Bell-Coleman cycle is a reversed:
Selected Answer: [None Given]
Answers: a.
Carnot cycle
b.
Joule cycle
c.
Brayton cycle
d.
Stirling cycle
• Question 24
0 out of 3.3 points
Which of the following is the definition of joule
Selected Answer: [None Given]
Answers: a.
newton meter
b.
rate of change of energy
c.
kgm/s2
d.
unit of power
• Question 25
0 out of 3.3 points
The gaseous products of combustion of a boiler which contains carbon dioxide,
carbon monoxide, oxygen, nitrogen and water vapor is called
Selected Answer: [None Given]
Answers: a.
Flue gas
b.
Universal gas
c.
Product gas
d.
Producer gas
• Question 26
0 out of 3.3 points
How much is the part of light that is absorbed by the body that transmits and
reflects 80% and 10% respectively?
Selected Answer: [None Given]
Answers: a.
20%
b.
30%
c.
10%
d.
5%
• Question 27
0 out of 3.3 points
The triple point of a substance is the temperature and pressure at which:
Selected [None Given]
Answer:
Answers: a.
The liquid and gaseous phases are in equilibrium
b.
The solid and liquid phases are in equilibrium
c.
The solid does not melt, the liquid does not boil, and the gas does
not condense
d.
The solid, liquid, and the gaseous phases are in equilibrium
• Question 28
0 out of 3.3 points
Exhaust stroke of gasoline engine is also known as
Selected Answer: [None Given]
Answers: a.
Supercharging
b.
Knocking
c.
Scavenging
d.
Choking
• Question 29
0 out of 3.3 points
Which of the following relations is not applicable in the free expansion process?
Selected Answer: [None Given]
Answers: a.
Heat supplied is zero
b.
Change in temperature is zero
c.
Heat rejected is zero
d.
Work done is zero
• Question 30
0 out of 3.3 points
All of the following are types of chemical bonds except:
Selected Answer: [None Given]
Answers: a.
Ionic bonds
b.
Nuclear bonds
c.
Covalent bonds
d.
Metallic bonds
• Question 1
0 out of 3.3 points
During the fusion process, mass is lost and converted to energy according to:
Selected Answer: a.
The Compton’s law
Answers: a.
The Compton’s law
b.
The Heisenburg uncertainty principle
c.
The 2nd law of thermodynamics
d.
Einstein’s law
• Question 2
0 out of 3.3 points
It refers to the ratio of the rate of the heat transferred by conduction to the rate
of the energy stored.
Selected Answer: a.
Prandtl number
Answers: a.
Prandtl number
b.
Reynolds number
c.
Fourier number
d.
Biot number
• Question 3
0 out of 3.3 points
Which of the following is mathematically a thermodynamic property?
Selected Answer: a.
Exact differential
Answers: a.
Exact differential
b.
A point function
c.
Discontinuous
d.
A path function
• Question 4
0 out of 3.3 points
Which of the following is the color of iron when it its heated to a highest
temperature?
Selected Answer: [None Given]
Answers: a.
yellow
b.
White
c.
Orange
d.
Red
• Question 5
0 out of 3.3 points
The mechanical efficiency of a device is the ratio of the
Selected [None Given]
Answer:
Answers: a.
Mechanical energy input to the mechanical energy output of the
device
b.
Ideal energy input to the actual energy input
c.
Actual to the ideal energy input
d.
Actual energy extracted to the ideal energy extracted
• Question 6
0 out of 3.3 points
In an oxidation – reduction chemical reaction, all of the following occur except:
Selected Answer: a.
Elements becoming more positive
Answers: a.
Elements becoming more positive
b.
Nuclear fusion
c.
Elements becoming more negative
d.
The exchange of electrons between elements
• Question 7
0 out of 3.3 points
Form of energy associated with the kinetic energy of the random motion of large
number of molecules.
Selected Answer: [None Given]
Answers: a.
heat of fusion
b.
kinetic energy
c.
internal enegy
d.
heat
• Question 8
0 out of 3.3 points
What air pressure is needed of air starting a diesel engine?
Selected Answer: a.
250 psi
Answers: a.
250 psi
b.
350 psi
c.
450 psi
d.
150 psi
• Question 9
3.3 out of 3.3 points
What is the use of a hydraulic jump?
Selected Answer: a.
Reduce the energy of flow
Answers: a.
Reduce the energy of flow
b.
Increase the flow rate
c.
Reduce the velocity of flow
d.
Reduce the flow rate
• Question 10
0 out of 3.3 points
Mechanical energy of pressure transformed into energy of heat
Selected Answer: a.
Heat of compression
Answers: a.
Heat of compression
b.
Enthalpy
c.
Kinetic energy
d.
Heat exchanger
• Question 11
0 out of 3.3 points
The lowest portion to storage basin from where the water is not drawn is:
Selected Answer: [None Given]
Answers: a.
Sub-soil storage
b.
Dead storage
c.
Spring reserve
d.
Bottom storage
• Question 12
0 out of 3.3 points
Which one of the following is standard temperature and pressure (STP)
Selected Answer: [None Given]
Answers: a.
0k and 1 atm pressure
b.
32 F and zero pressure
c.
0f and zero pressure
d.
0 C and 1 atm pressure
• Question 13
0 out of 3.3 points
Pitot tube is use to measure the:
Selected Answer: [None Given]
Answers: a.
Velocity of mass
b.
Flow
c.
Velocity of flow
d.
Velocity of pipe
• Question 14
0 out of 3.3 points
API gravity of water is:
Selected Answer: [None Given]
Answers: a.
100
b.
1.0
c.
Zero
d.
10
• Question 15
0 out of 3.3 points
The following are not included in the first law of thermodynamics for closed
system EXCEPT:
Selected Answer: [None Given]
Answers: a.
internal energy
b.
heat transferred in and out of the system
c.
work done by or on the system
d.
kinetic energy
• Question 16
0 out of 3.3 points
The Bureau of Standard uses, among others, liquid – vapor equilibrium of Nitrogen
at.
Selected Answer: [None Given]
Answers: a.
253°C
b.
196°C
c.
-196°C
d.
-253°C
• Question 17
0 out of 3.3 points
Exhaust gas leakage into the cooling system is most likely occur because of
defective:
Selected Answer: [None Given]
Answers: a.
Any of the other choices
b.
Manifold gasket
c.
Cylinder head gasket
d.
Water pump
• Question 18
0 out of 3.3 points
The passing of heat energy from molecule to molecule through a substance
Selected Answer: [None Given]
Answers: a.
Convection
b.
Radiation
c.
Conservation
d.
Conduction
• Question 19
0 out of 3.3 points
A nozzle is used to
Selected Answer: [None Given]
Answers: a.
increase velocity and decrease pressure
b.
increase velocity as well as pressure
c.
decrease velocity and increase pressure
d.
decrease velocity as well as pressure
• Question 20
0 out of 3.3 points
All of the following terms included in the first law for open system except
Selected Answer: [None Given]
Answers: a.
Internal system
b.
Magnetic system
c.
Work done by or in the system
d.
Heat transferred in and out of the system
• Question 21
0 out of 3.3 points
The gaseous products of combustion of a boiler which contains carbon dioxide,
carbon monoxide, oxygen, nitrogen and water vapor is called
Selected Answer: [None Given]
Answers: a.
Producer gas
b.
Product gas
c.
Flue gas
d.
Universal gas
• Question 22
0 out of 3.3 points
The heat of vaporization involves the change in enthalpy due to:
Selected Answer: [None Given]
Answers: a.
the change in phase in phase from liquid to gas
b.
the energy released in a chemical reaction
c.
the change in phase is from solid to gas
d.
the change in phase from solid to liquid
• Question 23
0 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called _________.
Selected Answer: [None Given]
Answers: a.
Heat reservoir
b.
Sink
c.
Cold reservoir
d.
Source
• Question 24
0 out of 3.3 points
Least value of Prandt’l number can be expected in case of ____________.
Selected Answer: [None Given]
Answers: a.
Sugar solution
b.
Salt solution
c.
Water
d.
Liquid metals
• Question 25
0 out of 3.3 points
Under ideal conditions, isothermal, isobaric, isochoric and adiabatic processes
are:
Selected Answer: [None Given]
Answers: a.
dynamic processes
b.
static processes
c.
stable processes
d.
quasi-static processes
• Question 26
0 out of 3.3 points
The total mass per unit volume of any substance
Selected Answer: [None Given]
Answers: a.
Specific Volume
b.
Specific weight
c.
Density
d.
Specific gravity
• Question 27
0 out of 3.3 points
Which of the following is the equivalent heat transferred of a gas undergoing
isometric process?
Selected Answer: [None Given]
Answers: a.
change in entropy
b.
change in enthalpy
c.
change in internal energy
d.
work nonflow
• Question 28
0 out of 3.3 points
A property of lubricating oil that measure the thickness of the oil ad will help
determine how long oil will flow at a given temperature is known as:
Selected Answer: [None Given]
Answers: a.
Flash point
b.
Cloud point
c.
Viscosity
d.
Cloud point
• Question 29
0 out of 3.3 points
The temp of the fluid flowing under pressure through a pipe is usually measured
by:
Selected Answer: [None Given]
Answers: a.
A thermocouple
b.
All of the other choices
c.
A glass thermometer
d.
An electric resistance thermometer
• Question 30
0 out of 3.3 points
Brayton cycle has
Selected a.
Answer: Two isothermal, one constant volume and one constant pressure
processes
Answers: a.
Two isothermal, one constant volume and one constant pressure
processes
b.
Two isentropic and two constant volume processes
c.
Two isentropic and two constant pressure processes
d.
One constant pressure, one constant volume and two adiabatic
processes
• Question 1
0 out of 3.3 points
Dritus Boelter equation can be applied in case of fluids flowing in:
Selected Answer: a.
Laminar region
Answers: a.
Laminar region
b.
Turbulent region
c.
Transition region
d.
Any of the other choices
• Question 2
0 out of 3.3 points
Which oil is more viscous?
Selected Answer: d.
SAE 50
Answers: a.
SAE 40
b.
SAE 80
c.
SAE 30
d.
SAE 50
• Question 3
0 out of 3.3 points
The coefficient of discharge is the ratio of the:
Selected Answer: a.
Area of vena contracta to the orifice
Answers: a.
Area of vena contracta to the orifice
b.
Actual velocity to the theoretical velocity
c.
Actual discharge to the theoretical discharge
d.
Effective head to the actual head
• Question 4
0 out of 3.3 points
Which of the following is not a good conductor of heat?
Selected Answer: d.
Rocks
Answers: a.
Asbestos
b.
Glass
c.
Metals
d.
Rocks
• Question 5
3.3 out of 3.3 points
When a substance in gaseous state is below the critical temperature, it is called
Selected Answer: c.
vapor
Answers: a.
moisture
b.
steam
c.
vapor
d.
cloud
• Question 6
3.3 out of 3.3 points
A property of lubricating oil that measure the thickness of the oil ad will help
determine how long oil will flow at a given temperature is known as:
Selected Answer: d.
Viscosity
Answers: a.
Cloud point
b.
Flash point
c.
Cloud point
d.
Viscosity
• Question 7
3.3 out of 3.3 points
The extension and compression of helical spring is an example of what process?
Selected Answer: a.
Reversible process
Answers: a.
Reversible process
b.
Thermodynamic process
c.
Adiabatic process
d.
Isothermal process
• Question 8
0 out of 3.3 points
Which of the following is the property of the solid that provides the measure of
the rate of heat transfer to the energy storage?
Selected Answer: a.
thermal conductivity
Answers: a.
thermal conductivity
b.
thermal diffusivity
c.
thermal radiography
d.
thermal efficiency
• Question 9
3.3 out of 3.3 points
A thermodynamic system that generally serves as a heat source or sink for another
system.
Selected Answer: d.
heat reservoir
Answers: a.
heat engine
b.
stirling engine
c.
combustion chamber
d.
heat reservoir
• Question 10
3.3 out of 3.3 points
Odometer is
Selected Answer: a.
An instrument used for distance measurement
Answers: a.
An instrument used for distance measurement
b.
An instrument used for BHP measurement
c.
An instrument that indicates the condition of the battery
d.
An instrument used for measurement of fuel consumption
• Question 11
3.3 out of 3.3 points
Which of the following could be defined as simply push and pull?
Selected Answer: d.
Force
Answers: a.
Inertia
b.
Work
c.
Power
d.
Force
• Question 12
0 out of 3.3 points
How do you call of removing of impurities from a gas by bubbling it through a
liquid purifying agent?
Selected Answer: c.
Gas purifying
Answers: a.
Gas bubbling
b.
Gas scrubbing
c.
Gas purifying
d.
Gas liquefying
• Question 13
0 out of 3.3 points
In the flow process, neglecting kinetic and potential energies, the integral of Vdp
represent what?
Selected Answer: d.
flow energy
Answers: a.
Shaft work
b.
enthalpy change
c.
heat transfer
d.
flow energy
• Question 14
0 out of 3.3 points
Adiabatic heat transfer within a vapor cycle refers to:
Selected a.
Answer: Heat transfer that is atmospheric bit not reversible
Answers: a.
Heat transfer that is atmospheric bit not reversible
b.
the net transfer equal the net work of the cycle
c.
the net heat transfer equals the energy change if no work done.
d.
The transfer of energy from one stream to another in a heat
exchanger so that the energy of the input
• Question 15
3.3 out of 3.3 points
In actual gases the molecular collisions are:
Selected Answer: c.
Inelastic
Answers: a.
Elastic
b.
Plastic
c.
Inelastic
d.
Inplastic
• Question 16
3.3 out of 3.3 points
What devices combines air and fuel for burning in cylinder?
Selected Answer: b.
Carburetor
Answers: a.
Regenerator
b.
Carburetor
c.
Intercooler
d.
Fuel injection
• Question 17
3.3 out of 3.3 points
Speedometer drive is generally taken from:
Selected Answer: a.
Front wheel
Answers: a.
Front wheel
b.
Flywheel
c.
Fan belt
d.
Dynamo
• Question 18
3.3 out of 3.3 points
By supercharging:
Selected Answer: d.
Thermal efficiency of the engine can be improved
Answers: a.
Loss in exhaust gets reduced
b.
Power stroke becomes stronger
c.
Engine can be made to run smoother
d.
Thermal efficiency of the engine can be improved
• Question 19
0 out of 3.3 points
A type of radiation consisting of singly charged particles that generate to
intermediate distances.
Selected Answer: b.
Alpha Radiation
Answers: a.
Gamma radiation
b.
Alpha Radiation
c.
Nuclear radiation
d.
Beta radiation
• Question 20
3.3 out of 3.3 points
The changing of solid directly to vapor without passing through the liquid state is
called
Selected Answer: b.
sublimation
Answers: a.
vaporization
b.
sublimation
c.
condensation
d.
evaporation
• Question 21
0 out of 3.3 points
Least value of Prandt’l number can be expected in case of ____________.
Selected Answer: d.
Salt solution
Answers: a.
Water
b.
Sugar solution
c.
Liquid metals
d.
Salt solution
• Question 22
0 out of 3.3 points
What condition exist in an adiabatic throttling process?
Selected Answer: c.
Entropy is constant
Answers: a.
Specific volume is constant
b.
Enthalpy is variable
c.
Entropy is constant
d.
Enthalpy is constant
• Question 23
3.3 out of 3.3 points
Which of the following gives polytropic under n?
Selected Answer: c.
log (P2/P1) / log (V1/V2)
Answers: a.
log (V1/V2) / log (P1/P2)
b.
log (P1/P2) / log (V1/V2)
c.
log (P2/P1) / log (V1/V2)
d.
log (V1/V2) / log (P2/P1)
• Question 24
3.3 out of 3.3 points
What is the first law of thermodynamics?
Selected Answer: c.
energy can neither be created nor destroyed
Answers: a.
entropy of the universe is increased by irreversible processes
b.
internal energy is due to molecular motions
c.
energy can neither be created nor destroyed
d.
heat energy cannot be completely transformed into work
• Question 25
0 out of 3.3 points
The residual oil left after distillation of gasoline and kerosene from crude
petroleum; yellow to brown oil, used as a diesel fuel and for enriching water gas.
Selected Answer: b.
Diesel oil
Answers: a.
LPG
b.
Diesel oil
c.
Gasoline oil
d.
Gas oil
• Question 26
0 out of 3.3 points
A valve in the carburetor of an internal combustion engines which regulates the
proportion of air gasoline vapors entering the cylinder
Selected Answer: b.
Check valve
Answers: a.
Choke valve
b.
Check valve
c.
Globe valve
d.
Gate valve
• Question 27
3.3 out of 3.3 points
One watt is:
Selected Answer: c.
1Nm/s
Answers: a.
1Nm/ min
b.
1kNm/s
c.
1Nm/s
d.
1Nm/ hr
• Question 28
0 out of 3.3 points
The reciprocal of density is?
Selected Answer: b.
Specific gravity
Answers: a.
Specific volume
b.
Specific gravity
c.
Specific heat
d.
Specific weight
• Question 29
0 out of 3.3 points
In a four stroke engine if a valve opens 25 before B.D.C. and close 10 after T.D.C the
valve should be:
Selected Answer: b.
Inlet valve
Answers: a.
Exhaust valve
b.
Inlet valve
c.
Spring valve
d.
Puppet valve
• Question 30
0 out of 3.3 points
The device for smoothing out the power impulses from the engine is known as:
Selected Answer: c.
Clutch
Answers: a.
Gear box
b.
differential
c.
Clutch
d.
Fly wheel
• Question 1
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: d.
Variable pressures
Answers: a.
Average pressures
b.
Complex pressures
c.
Positive and negative pressures
d.
Variable pressures
• Question 2
0 out of 3.3 points
For the same heat input and same compression ratio:
Selected Answer: c.
None of the other choices is correct
Answers: a.
Otto cycle is less efficient than diesel cycle
b.
Efficiency depends mainly on the working substance
c.
None of the other choices is correct
d.
Both otto cycle and diesel cycle are equally efficient
• Question 3
0 out of 3.3 points
What is the area under the curve of a pressure volume diagram?
Selected Answer: b.
Steady flow work
Answers: a.
Non flow work
b.
Steady flow work
c.
Power
d.
Heat
• Question 4
0 out of 3.3 points
Volumetric efficiency of a well designed engine may be in the range of:
Selected Answer: d.
60 to 75%
Answers: a.
30 to 50%
b.
75 to 90%
c.
Below 30%
d.
60 to 75%
• Question 5
0 out of 3.3 points
The continuity equation is applicable to
Selected Answer: c.
Steady, unsteady flow
Answers: a.
Compressibility of fluids
b.
Viscous, unviscous fluids
c.
Steady, unsteady flow
d.
Conservation of mass
• Question 6
0 out of 3.3 points
Air that controls the rat of combustion in the combustion chamber is known as:
Selected Answer: c.
Control air
Answers: a.
Primary air
b.
Secondary air
c.
Control air
d.
Excess air
• Question 7
0 out of 3.3 points
Which of the following is equivalent to 1 hp in btu/hr?
Selected Answer: a.
3.41
Answers: a.
3.41
b.
746
c.
778
d.
2545
• Question 8
3.3 out of 3.3 points
All processes below are irreversible except one. Which one?
Selected Answer: d.
Elastic tension and release of a steel bar
Answers: a.
Heat conduction
b.
Inelastic deformation
c.
Magnetization with hysteresis
d.
Elastic tension and release of a steel bar
• Question 9
3.3 out of 3.3 points
The heat transfer term in the first law of thermodynamics may be due to any of
the following except:
Selected Answer: b.
Internal heat generation(e.g., chemical reaction)
Answers: a.
Radiation
b.
Internal heat generation(e.g., chemical reaction)
c.
Conduction
d.
Convection
• Question 10
0 out of 3.3 points
Which of the following is not the universal gas constant?
Selected Answer: b.
8.314 J/mol-K
Answers: a.
8.314 kJ/kmol-K
b.
8.314 J/mol-K
c.
8314 kJ/mol-K
d.
1545 ft-lb/lbmol-R
• Question 11
0 out of 3.3 points
What is the main power generating plant that produces the most electricity per
unit thermal energy in the fuel input and has the greatest surplus of electricity for
most cogeneration system?
Selected Answer: c.
Steam engine
Answers: a.
Gas turbine
b.
Diesel turbine
c.
Steam engine
d.
Steam turbine
• Question 12
0 out of 3.3 points
The matching of scale model and full-scale results for a fluid dynamic
phenomena with a free surface requires equality of:
Selected Answer: c.
Reynolds number
Answers: a.
Froude number
b.
Weber number
c.
Reynolds number
d.
Cauchy number
• Question 13
0 out of 3.3 points
According to Clausius statement
Selected b.
Answer: Heat can flow from cold substance to substance with the aid of
external work
Answers: a.
Heat flow from hot surface to cold surface unaided
b.
Heat can flow from cold substance to substance with the aid of
external work
c.
Heat cannot flow from cold substance to hot substance
d.
A and C
• Question 14
0 out of 3.3 points
The volume flow passes through a venturimeter is:
Selected Answer: a.
Varying
Answers: a.
Varying
b.
Increasing
c.
Constant
d.
Decreasing
• Question 15
3.3 out of 3.3 points
Flash point of liquids is the temperature at which:
Selected a.
Answer:
The fuel emits vapors at a rate which produces and inflammable
mixture with air
Answers: a.
The fuel emits vapors at a rate which produces and inflammable
mixture with air
b.
The fuel ignites without a spark
c.
The fuel spontaneously ignites
d.
The fuel ignites with clearly visible flash
• Question 16
0 out of 3.3 points
In a hydro – electric plant using a Francis turbine with medium head, the speed can
be regulated using the
Selected Answer: a.
Deflector gate
Answers: a.
Deflector gate
b.
Wicket gate
c.
Weir
d.
Nozzle
• Question 17
0 out of 3.3 points
Which of the following is the definition of joule
Selected Answer: b.
unit of power
Answers: a.
rate of change of energy
b.
unit of power
c.
kgm/s2
d.
newton meter
• Question 18
0 out of 3.3 points
When four events takes place in one revolution of a crankshaft of an engine, the
engine is called:
Selected Answer: d.
Four stroke engine
Answers: a.
Two stroke engine
b.
Rotary engine
c.
Steam engine
d.
Four stroke engine
• Question 19
0 out of 3.3 points
The property of liquid in which they extend resistance to angular or shear
deformation is:
Selected Answer: b.
Specific gravity
Answers: a.
Density
b.
Specific gravity
c.
Specific weight
d.
Viscosity
• Question 20
3.3 out of 3.3 points
A decrease in stagnation pressure will decrease the mass flux through the:
Selected Answer: a.
Diverging nozzle
Answers: a.
Diverging nozzle
b.
Converging nozzle
c.
Converging- diverging nozzle
d.
None of these
• Question 21
3.3 out of 3.3 points
The ignition coil acts as
Selected Answer: c.
A step up transformer
Answers: a.
An inductor
b.
A capacitor
c.
A step up transformer
d.
An RC circuit
• Question 22
0 out of 3.3 points
The number of exhaust manifolds in a V-8 engine is:
Selected Answer: a.
Four
Answers: a.
Four
b.
There is no exhaust manifold
c.
One
d.
Two
• Question 23
0 out of 3.3 points
What is the temperature difference of the cycle if the entropy difference Is S, and
the work done is W?
Selected Answer: c.
W-S
Answers: a.
S/W
b.
S-W
c.
W-S
d.
W/S
• Question 24
3.3 out of 3.3 points
A mollier chart of thermodynamic properties is shown in which of the following
diagrams?
Selected Answer: a.
h-S diagram
Answers: a.
h-S diagram
b.
p-h diagram
c.
P-V diagram
d.
T-S diagram
• Question 25
3.3 out of 3.3 points
The triple point of a substance is the temperature and pressure at which:
Selected b.
Answer: The solid does not melt, the liquid does not boil and the gas does
not condense
Answers: a.
The solid and gaseous phase are in equilibrium
b.
The solid does not melt, the liquid does not boil and the gas does
not condense
c.
The solid and liquid phase are in equilibrium
d.
The solid liquid and gaseous phases are in the equilibrium
• Question 26
3.3 out of 3.3 points
In the flow process, neglecting kinetic and potential energies, the integral of Vdp
represent what?
Selected Answer: d.
Shaft work
Answers: a.
flow energy
b.
heat transfer
c.
enthalpy change
d.
Shaft work
• Question 27
3.3 out of 3.3 points
The temperature at which its vapor pressure is equal to the pressure exerted on
the liquid
Selected Answer: a.
boiling point
Answers: a.
boiling point
b.
absolute humidity
c.
thermal point
d.
calorimetry
• Question 28
3.3 out of 3.3 points
The pitot tube is a device used for measurement of
Selected Answer: a.
velocity
Answers: a.
velocity
b.
discharge
c.
flow
d.
pressure
• Question 29
0 out of 3.3 points
What should be the temperature of both water and steam whenever they
present together?
Selected Answer: d.
One hundred degrees centigrade
Answers: a.
Boiling point of water at 101.325 kPa
b.
Saturation temperature for the existing pressure
c.
Super heated temperature
d.
One hundred degrees centigrade
• Question 30
3.3 out of 3.3 points
The total mass per unit volume of any substance
Selected Answer: c.
Density
Answers: a.
Specific gravity
b.
Specific weight
c.
Density
d.
Specific Volume
• Question 1
0 out of 3.3 points
Which of the following types of flowmeters is most accurate?
Selected Answer: a.
Venturi tube
Answers: a.
Venturi tube
b.
Foam type
c.
Flow nozzle
d.
stop valve
• Question 2
0 out of 3.3 points
Which is not correct for calculating air standard efficiency?
Selected Answer: a.
All processes are reversible
Answers: a.
All processes are reversible
b.
No account of the mechanism of heat transfer is considered
c.
Gases dissociate at higher temperatures
d.
Specific heat remains unchanged at all temperatures
• Question 3
0 out of 3.3 points
The only base unit with a prefix kilo is
Selected Answer: c.
Kilometer
Answers: a.
kilopascal
b.
Kilogram
c.
Kilometer
d.
Kilo Joule
• Question 4
0 out of 3.3 points
What do you call the passing of heat energy from molecule to molecule through
a substance?
Selected Answer: a.
Radiation
Answers: a.
Radiation
b.
Conduction
c.
Convection
d.
Conservation
• Question 5
0 out of 3.3 points
Which of the following is not a prefix used in naming isomers?
Selected Answer: b.
Cis
Answers: a.
Meta
b.
Cis
c.
Bi
d.
Para
• Question 6
3.3 out of 3.3 points
Which of the following is not a good conductor of heat?
Selected Answer: b.
Asbestos
Answers: a.
Rocks
b.
Asbestos
c.
Metals
d.
Glass
• Question 7
0 out of 3.3 points
As a rule before the piston are removed, it is essential to remove the :
Selected Answer: d.
Gudgeon pin
Answers: a.
Piston rings
b.
Circlip
c.
Crankshaft
d.
Gudgeon pin
• Question 8
3.3 out of 3.3 points
Which of the following statements regarding rankine cycle is not true?
Selected d.
Answer: in practical terms, the susceptibility of the engine materials to
corrosion is not a key limitation on the operating efficiency
Answers: a.
the temperature at which energy is transferred to and from the
working liquid are less separated than in a carnot cycle
b.
use of condesaable vapor in the cycle increases the efficiency of the
cycle
c.
superheating increases the efficiency of a rankine cycle
d.
in practical terms, the susceptibility of the engine materials to
corrosion is not a key limitation on the operating efficiency
• Question 9
0 out of 3.3 points
The combination of conditions that best describes a thermodynamic process is
given by which of the following?
I. Has successive states through which the system passes
II. When reversed leaves no change in the system
III. When reversed leaves no change in the system or the surroundings
IV. States are passes through so quickly that the surroundings do not
change
Selected Answer: a.
I & III
Answers: a.
I & III
b.
I only
c.
I &IV
d.
I & II
• Question 10
0 out of 3.3 points
Ericsson cycle consists of the following processes:
Selected Answer: d.
Two isothermal & two constant volume processes
Answers: a.
Two isothermal and two constant isentropic
b.
Two adiabatic and two constant pressures
c.
Two isothermal and two constant pressure
d.
Two isothermal & two constant volume processes
• Question 11
3.3 out of 3.3 points
It is a form of energy associated with the kinetic random motion of large number of
molecules.
Selected Answer: b.
Heat
Answers: a.
internal energy
b.
Heat
c.
kinetic energy
d.
Enthalpy
• Question 12
0 out of 3.3 points
At atmospheric condition, hydrocarbon molecules with a low number of carbon
atoms, 1 to 4 are
Selected Answer: c.
Atomic
Answers: a.
Liquids
b.
Light oils
c.
Atomic
d.
Gases
• Question 13
3.3 out of 3.3 points
The temperature at which its vapor pressure is equal to the pressure exerted on
the liquid
Selected Answer: b.
boiling point
Answers: a.
thermal point
b.
boiling point
c.
calorimetry
d.
absolute humidity
• Question 14
3.3 out of 3.3 points
In a two-phase system, 30% moisture means
Selected Answer: d.
70% vapor and 30% liquid
Answers: a.
70% liquid and 30% vapor
b.
30% liquid and 100% vapor
c.
30% vapor and 100% liquid
d.
70% vapor and 30% liquid
• Question 15
3.3 out of 3.3 points
Dew point is defined as
Selected d.
Answer: The temperature to which the air must be cooled at constant
pressure to produce saturation
Answers: a.
The point where the pressure and temperature lines meet
b.
The temperature which dew is formed in the air
c.
The pressure which dew is formed in the air.
d.
The temperature to which the air must be cooled at constant
pressure to produce saturation
• Question 16
3.3 out of 3.3 points
The compressibility factor z, is used for predicting the behavior of non-ideal gases.
How is the compressibility factor defined relative to an ideal gas? (subscript c
refers to critical value)
Selected Answer: a.
Z = PV/RT
Answers: a.
Z = PV/RT
b.
Z = T/Tc
c.
Z = P/Pc
d.
Z = (T/Tc)(Pc/P)
• Question 17
0 out of 3.3 points
In an actual gases, the molecular collisions are
Selected Answer: a.
inplastic
Answers: a.
inplastic
b.
elastic
c.
plastic
d.
inelastic
• Question 18
0 out of 3.3 points
A type of water turbine where a jet of water is made to fall on the blades or
buckets and due to the impulse of water, the turbine starts to move.
Selected Answer: a.
Reaction turbine
Answers: a.
Reaction turbine
b.
Francis turbine
c.
Pelton wheel
d.
Steam turbine
• Question 19
3.3 out of 3.3 points
The device that measures the temperature by the electromotive force.
Selected Answer: a.
thermocouple
Answers: a.
thermocouple
b.
thermometer
c.
electro-thermometer
d.
thermoseebeck
• Question 20
0 out of 3.3 points
Amount of heat liberated by the complete combustion of a unit weight or volume of
fuel is:
Selected Answer: d.
Sensible heat
Answers: a.
Heating value
b.
Work compression
c.
Latent
d.
Sensible heat
• Question 21
0 out of 3.3 points
The properties that are dependent upon the mass of the system and are total
values such as total volume and total infernal energy
Selected Answer: a.
intensive properties
Answers: a.
intensive properties
b.
specific properties
c.
extensive properties
d.
state properties
• Question 22
3.3 out of 3.3 points
Which of the following best describe function of heat exchanger?
Selected Answer: c.
transfer heat from one fluid to another
Answers: a.
increase the water temperature entering the
b.
evaluate the total energy content of the flow
c.
transfer heat from one fluid to another
d.
exchange heat to increase energy to the flow
• Question 23
0 out of 3.3 points
Which of the following requires the greatest amount of heat per kilogram for a
given increase in temperature?
Selected Answer: a.
Steam
Answers: a.
Steam
b.
Copper
c.
Water
d.
Ice
• Question 24
0 out of 3.3 points
Both Stirling and Ericson engine are
Selected Answer: d.
Carnot engines
Answers: a.
Internal combustion engines
b.
Brayton engines
c.
External combustion engines
d.
Carnot engines
• Question 25
3.3 out of 3.3 points
In pumped storage plant
Selected Answer: c.
Downstream water is pumped upstream during offload periods
Answers: a.
Power is produced by pumps
b.
Water is stored by pumping to high pressures
c.
Downstream water is pumped upstream during offload periods
d.
Pressure accumulators are used
• Question 26
0 out of 3.3 points
What do bodies at a temperature above absolute zero emit?
Selected Answer: a.
Heat of compression
Answers: a.
Heat of compression
b.
Thermal radiation
c.
Heat of convection
d.
Energy
• Question 27
3.3 out of 3.3 points
The properties of fluid at stagnation in state are called:
Selected Answer: c.
Stagnation state
Answers: a.
Stagnation property
b.
Stagnation vapor
c.
Stagnation state
d.
Stagnation phase
• Question 28
0 out of 3.3 points
Which of the ff is not a similarity between submerged culvert and a siphon?
Selected Answer: a.
Both can experience entrance and exit losses
Answers: a.
Both can experience entrance and exit losses
b.
They both operate full
c.
Torricelli’s equation holds
d.
In both, the water flows downhill
• Question 29
3.3 out of 3.3 points
The total entropy of a pure substance approaches zero as the absolute
thermodynamics temperature approaches zero.
Selected Answer: a.
third law of thermodynamics
Answers: a.
third law of thermodynamics
b.
second law of thermodynamics
c.
first law of thermodynamics
d.
Zeroth law of thermodynamics
• Question 30
0 out of 3.3 points
Which of the following heat exchange device used to provide heat transfer
between the exhaust gases and air prior to the entrance of a combustor?
Selected Answer: b.
economizer
Answers: a.
regenerator
b.
economizer
c.
reheater
d.
condenser
• Question 1
0 out of 3.3 points
Is one whose pressure is higher than saturation pressure corresponding to its
temperature
Selected Answer: [None Given]
Answers: a.
saturated vapor
b.
super heated vapor
c.
saturated liquid
d.
compressed liquid
• Question 2
0 out of 3.3 points
In Maxwell’s theory for thermal conductivity of gases and vapors, which of the
following is the value of “a” for triatomic gases?
Selected Answer: [None Given]
Answers: a.
2.4
b.
2.8
c.
1.7
d.
1.3
• Question 3
0 out of 3.3 points
All of the following are forms of drag on a body moving through a fluid except:
Selected Answer: [None Given]
Answers: a.
Wake drag
b.
D’alembert’s paradox drag
c.
Profile drag
d.
Skin friction
• Question 4
0 out of 3.3 points
A type of water turbine where a jet of water is made to fall on the blades or
buckets and due to the impulse of water, the turbine starts to move.
Selected Answer: [None Given]
Answers: a.
Francis turbine
b.
Steam turbine
c.
Pelton wheel
d.
Reaction turbine
• Question 5
0 out of 3.3 points
What is the pressure at the exit of a draft tube in a turbine?
Selected Answer: [None Given]
Answers: a.
Gage
b.
Atmospheric
c.
Below atmospheric
d.
Vacuum
• Question 6
0 out of 3.3 points
A laminated glass on cracking:
Selected Answer: [None Given]
Answers: a.
Sandwiched layer taps the fragments
b.
Bursts into granular pieces
c.
Bursts into sharp edged fragments
d.
Breaks into the farm of crystals
• Question 7
0 out of 3.3 points
Which oil is more viscous?
Selected Answer: [None Given]
Answers: a.
SAE 30
b.
SAE 80
c.
SAE 50
d.
SAE 40
• Question 8
0 out of 3.3 points
The pressure obtained from barometric pressure reading.
Selected Answer: [None Given]
Answers: a.
absolute pressure
b.
gage pressure
c.
vacuum pressure
d.
atmospheric pressure
• Question 9
0 out of 3.3 points
A reservoir that supplies energy in the form of heat is called:
Selected Answer: [None Given]
Answers: a.
Sink
b.
Heat reservoir
c.
Source
d.
Cold reservoir
• Question 10
0 out of 3.3 points
Hydrocarbons with 5 to 15 carbon atoms are:
Selected Answer: [None Given]
Answers: a.
Commercial fuels
b.
More or less volatile light oils
c.
Referred to as heavy oils
d.
Mixtures of many kinds of hydro carbons
• Question 11
0 out of 3.3 points
All of the following are characteristics of metals except:
Selected Answer: [None Given]
Answers: a.
High electrical conductivities
b.
Tendency to form brittle solids
c.
Tendency to form positive ions
d.
High melting points
• Question 12
0 out of 3.3 points
A type of radiation consisting of singly charged particles that generate to
intermediate distances.
Selected Answer: [None Given]
Answers: a.
Nuclear radiation
b.
Alpha Radiation
c.
Gamma radiation
d.
Beta radiation
• Question 13
0 out of 3.3 points
Hot spots
Selected Answer: [None Given]
Answers: a.
Are the hotter spots in engines
b.
Are the spots where heavier functions of fuel are vaporized
c.
Do not exist in engines
d.
Are the defects in S.I in engines
• Question 14
0 out of 3.3 points
Which of the following statements regarding rankine cycle is not true?
Selected [None Given]
Answer:
Answers: a.
the temperature at which energy is transferred to and from the
working liquid are less separated than in a carnot cycle
b.
in practical terms, the susceptibility of the engine materials to
corrosion is not a key limitation on the operating efficiency
c.
superheating increases the efficiency of a rankine cycle
d.
use of condesaable vapor in the cycle increases the efficiency of the
cycle
• Question 15
0 out of 3.3 points
At equal volume, at the same temperature and pressure conditions. The gas
contains the same number of molecules,
Selected Answer: [None Given]
Answers: a.
Boyle’s law
b.
Avogadro’s law
c.
Dalton’s law
d.
Charles law
• Question 16
0 out of 3.3 points
Poor compression in a two stroke engine cannot be because of:
Selected Answer: [None Given]
Answers: a.
Leaking cylinder head gasket
b.
Broken piston rings
c.
Poor fit between pistons, rings and cylinder
d.
Leaky valves
• Question 17
0 out of 3.3 points
In series pipe systems, all of the ff parameters vary from section to section
except
Selected Answer: [None Given]
Answers: a.
Head loss
b.
Mass flow
c.
Pressure drop
d.
Friction loss
• Question 18
0 out of 3.3 points
At what temperature wherein an oil of any grade becomes cloudy and it freezes,
thus its application is limited
Selected Answer: [None Given]
Answers: a.
Flash point
b.
Freezing point
c.
Cold point
d.
Pour point
• Question 19
0 out of 3.3 points
Graduations in the properties of elements from one elements to the next less
pronounced in:
Selected Answer: [None Given]
Answers: a.
Active metals
b.
Groups
c.
The lanthanide series
d.
Periods
• Question 20
0 out of 3.3 points
A temperature above which a given gas cannot be liquefied:
Selected Answer: [None Given]
Answers: a.
Absolute temperature
b.
Critical temperature
c.
Cryogenic temperature
d.
Vaporization temperature
• Question 21
0 out of 3.3 points
All heat transfer processes require a medium of energy exchange except:
Selected Answer: [None Given]
Answers: a.
Forced convection
b.
Natural convection
c.
Radiation
d.
Conduction
• Question 22
0 out of 3.3 points
All heat transfer processes:
Selected Answer: [None Given]
Answers: a.
Involve temperature difference between the bodies
b.
Involve transfer of energy
c.
Obey first law of thermodynamics
d.
Obey second law of thermodynamics
• Question 23
0 out of 3.3 points
Which of the following instrument is used in measuring specific gravity?
Selected Answer: [None Given]
Answers: a.
Hydrometer
b.
Thermometer
c.
Anemometer
d.
Hygrometer
• Question 24
0 out of 3.3 points
The minimum cranking speed in petrol engine is:
Selected Answer: [None Given]
Answers: a.
Same as the normal operating speed
b.
60-80 rpm
c.
Half of the operating speed
d.
One fourth of operating speed
• Question 25
0 out of 3.3 points
Which of the following is the driving force in heat transfer?
Selected Answer: [None Given]
Answers: a.
dielectric gradient
b.
viscosity gradient
c.
temperature gradient
d.
thickness gradient
• Question 26
0 out of 3.3 points
What usually happens to the surrounding when water vapor condenses?
Selected Answer: [None Given]
Answers: a.
It warms the surrounding
b.
The surrounding temperature decreases
c.
It neither warm nor cold the surrounding
d.
It neither warm nor cold the surrounding
• Question 27
0 out of 3.3 points
What is the area under the curve of a pressure volume diagram?
Selected Answer: [None Given]
Answers: a.
Power
b.
Steady flow work
c.
Heat
d.
Non flow work
• Question 28
0 out of 3.3 points
A Kaplan turbine is:
Selected Answer: [None Given]
Answers: a.
An outward flow reaction turbine
b.
Low head axial flow turbine
c.
A high head mixed flow turbine
d.
An inward flow impulse turbine
• Question 29
0 out of 3.3 points
The absolute zero on the Fahrenheit scale is at
Selected Answer: [None Given]
Answers: a.
-459.7 degree F
b.
-273.15 degree C
c.
273.15 decree C
d.
459.7 degree F
• Question 30
0 out of 3.3 points
What is the absolute temperature in Celsius scale?
Selected Answer: [None Given]
Answers: a.
Absolute Celsius
b.
Absolute Fahrenheit
c.
Degrees Kelvin
d.
Degree Rankine
• Question 1
3.3 out of 3.3 points
What is the most efficient thermodynamics cycle?
Selected Answer: c.
Carnot
Answers: a.
Brayton
b.
Rankine
c.
Carnot
d.
Diesel
• Question 2
0 out of 3.3 points
The total energy in a compressible or incompressible fluid across any section in a
pipeline is a function of
Selected a.
Answer: pressure, density, velocity and viscosity
Answers: a.
pressure, density, velocity and viscosity
b.
flow energy, kinetic energy, height above datum and internal
energy
c.
pressure and velocity
d.
pressure, density, and velocity
• Question 3
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: a.
complex pressure
Answers: a.
complex pressure
b.
positive and negative pressure
c.
compound pressure
d.
variable pressure
• Question 4
0 out of 3.3 points
In Stirling engine, the heat is added during
Selected Answer: d.
Isometric process
Answers: a.
Isentropic process
b.
Isothermal process
c.
Isobaric process
d.
Isometric process
• Question 5
0 out of 3.3 points
Which of the following is the usual geometric view factor for a black body?
Selected Answer: [None Given]
Answers: a.
One
b.
Infinity
c.
Zero
d.
Indeterminate
• Question 6
0 out of 3.3 points
The Bureau of Standard uses, among others, liquid – vapor equilibrium of Nitrogen
at.
Selected Answer: a.
196°C
Answers: a.
196°C
b.
-253°C
c.
253°C
d.
-196°C
• Question 7
0 out of 3.3 points
Which of the following is used as high head turbine?
Selected Answer: [None Given]
Answers: a.
Propeller
b.
Impulse
c.
Reaction
d.
Francis
• Question 8
0 out of 3.3 points
Which of the following is the cause of loss power?
Selected Answer: [None Given]
Answers: a.
Poor compression
b.
Clogging of air cleaner
c.
Low injection pressure
d.
Restricted exhaust
• Question 9
0 out of 3.3 points
The gaseous products of combustion of a boiler which contains carbon dioxide,
carbon monoxide, oxygen, nitrogen and water vapor is called
Selected Answer: a.
Universal gas
Answers: a.
Universal gas
b.
Flue gas
c.
Producer gas
d.
Product gas
• Question 10
0 out of 3.3 points
Dry air can be approximated as __% oxygen and __% nitrogen by mole numbers.
Selected Answer: a.
30% and 70%
Answers: a.
30% and 70%
b.
70% and 30%
c.
79% and 21%
d.
21% and 79%
• Question 11
0 out of 3.3 points
Volumetric efficiency of a well designed engine may be in the range of:
Selected Answer: [None Given]
Answers: a.
Below 30%
b.
60 to 75%
c.
30 to 50%
d.
75 to 90%
• Question 12
3.3 out of 3.3 points
“It is impossible to construct a heat engine that operates in a cycle and receives a
given quantity of heat from a high temperature body and does an equal amount of
work”. The above statement is known as:
Selected Answer: a.
Kelvin-Planck’s law
Answers: a.
Kelvin-Planck’s law
b.
Joule-Thompson’s law
c.
Gay Lussac’s law
d.
Kinetic theory
• Question 13
0 out of 3.3 points
The device that is used for reducing the exhaust noise is called
Selected Answer: [None Given]
Answers: a.
None of the other choices
b.
Exhaust pipe
c.
Muffler
d.
Exhaust manifold
• Question 14
3.3 out of 3.3 points
What is the temperature when water and water vapor are in equilibrium with the
atmospheric pressure?
Selected Answer: a.
Steam point
Answers: a.
Steam point
b.
Ice point
c.
Freezing point
d.
Critical point
• Question 15
0 out of 3.3 points
What do you call the first stage of crystal formation?
Selected Answer: [None Given]
Answers: a.
Separation
b.
Nucleation
c.
Foamation
d.
Vortexing
• Question 16
0 out of 3.3 points
The continuity equation is applicable to
Selected Answer: [None Given]
Answers: a.
Steady, unsteady flow
b.
Viscous, unviscous fluids
c.
Compressibility of fluids
d.
Conservation of mass
• Question 17
0 out of 3.3 points
Ericsson cycle consists of the following processes:
Selected Answer: [None Given]
Answers: a.
Two isothermal and two constant pressure
b.
Two isothermal and two constant isentropic
c.
Two adiabatic and two constant pressures
d.
Two isothermal & two constant volume processes
• Question 18
0 out of 3.3 points
Gauge pressure and absolute pressure differ from each other by:
Selected Answer: [None Given]
Answers: a.
The system units
b.
Nothing they mean the same thing
c.
Atmospheric pressure
d.
The size of the gauge
• Question 19
0 out of 3.3 points
Radiant heat transfer is described by :
Selected Answer: [None Given]
Answers: a.
The Logarithmic mean temperature
b.
Kirchoff’s Law
c.
Newton’s Law
d.
Fourier’s Law
• Question 20
0 out of 3.3 points
The following are all commonly quoted values of standard temperatures and
pressures except:
Selected Answer: [None Given]
Answers: a.
32F and 14.696 psia
b.
0C and 760mm Hg
c.
0F and 29.92in Hg
d.
273.15K and 101.325 kPa
• Question 21
0 out of 3.3 points
A specific property
Selected Answer: [None Given]
Answers: a.
is independent of mass
b.
is dependent of the phase of the substance
c.
defines a specific variable (e.g., temperature)
d.
is an extensive property multiplied by mass
• Question 22
0 out of 3.3 points
The heat transfer term in the first law of thermodynamics may be due to any of
the following except:
Selected Answer: [None Given]
Answers: a.
Radiation
b.
Convection
c.
Conduction
d.
Internal heat generation(e.g., chemical reaction)
• Question 23
0 out of 3.3 points
How do you call of removing of impurities from a gas by bubbling it through a
liquid purifying agent?
Selected Answer: [None Given]
Answers: a.
Gas purifying
b.
Gas bubbling
c.
Gas liquefying
d.
Gas scrubbing
• Question 24
0 out of 3.3 points
The pressure measured from the level of atmospheric pressure by most pressure
recording instrument like pressure gage and open – ended manometer.
Selected Answer: [None Given]
Answers: a.
barometric pressure
b.
atmospheric pressure
c.
gage pressure
d.
vacuum pressure
• Question 25
0 out of 3.3 points
What is the absolute temperature in Celsius scale?
Selected Answer: [None Given]
Answers: a.
Absolute Celsius
b.
Degree Rankine
c.
Degrees Kelvin
d.
Absolute Fahrenheit
• Question 26
0 out of 3.3 points
Which of the following devices used to measure the discharge of outflow from a
vessel?
Selected Answer: [None Given]
Answers: a.
Pitot tube
b.
Obstruction meter
c.
Orifice
d.
Pump head
• Question 27
0 out of 3.3 points
A manometer is an instrument that is used to measure:
Selected Answer: [None Given]
Answers: a.
Air pressure
b.
Air volume
c.
Heat radiation
d.
Condensate water level
• Question 28
0 out of 3.3 points
Measure the diffuser’s ability to increase the pressure of the fluid is:
Selected Answer: [None Given]
Answers: a.
Diffuser recovery factor
b.
Pressure recovery factor
c.
Speed recovery factor
d.
Volume recovery factor
• Question 29
0 out of 3.3 points
The transmission of heat from one place to another by fluid circulation between
the spots of different temperatures is called ______.
Selected Answer: [None Given]
Answers: a.
Convection
b.
Conduction
c.
Conservation
d.
Radiation
• Question 30
0 out of 3.3 points
Why are metals good conductors of heat?
Selected Answer: [None Given]
Answers: a.
Because they have reflecting surfaces
b.
Because their atoms are relatively far apart
c.
Because they contain free electrons
d.
Because their atoms collide infrequently
• Question 1
0 out of 3.3 points
The heat transfer by convection occurs in which of the following?
Selected Answer: a.
Only in liquids
Answers: a.
Only in liquids
b.
Only in gases and liquids
c.
Only in gases and solids
d.
Only in gases
• Question 2
3.3 out of 3.3 points
A laminated glass on cracking:
Selected Answer: a.
Sandwiched layer taps the fragments
Answers: a.
Sandwiched layer taps the fragments
b.
Bursts into sharp edged fragments
c.
Bursts into granular pieces
d.
Breaks into the farm of crystals
• Question 3
3.3 out of 3.3 points
The Carnot refrigeration cycle includes all of the following processes except:
Selected Answer: a.
Isothermal heating
Answers: a.
Isothermal heating
b.
Isentropic expansion
c.
Isenthalpic expansion
d.
Isentropic compression
• Question 4
0 out of 3.3 points
Which of the following statement about Van der Waals equation is correct?
Selected Answer: [None Given]
Answers: a.
The equation is valid for diatomic gases only.
b.
It represents a straight line on PV versus V plot
c.
It has three roots of identical value at the critical point
d.
It is valid for all pressures and temperatures
• Question 5
0 out of 3.3 points
An Orsat’s apparatus is used for
Selected Answer: a.
Gravimetric analysis of the flue gas
Answers: a.
Gravimetric analysis of the flue gas
b.
All of the other choices
c.
Smoke density analysis of the flue gas
d.
Volumetric analysis of the flue gas
• Question 6
3.3 out of 3.3 points
Radiant heat transfer is described by :
Selected Answer: b.
Kirchoff’s Law
Answers: a.
Fourier’s Law
b.
Kirchoff’s Law
c.
Newton’s Law
d.
The Logarithmic mean temperature
• Question 7
0 out of 3.3 points
When fuel oil has a high viscosity then the fuel oil
Selected Answer: [None Given]
Answers: a.
Will have a low specific gravity
b.
Will flow slowly through pipes
c.
Will evaporate easily
d.
Will burn without smoke
• Question 8
0 out of 3.3 points
The thermal resistance for one-dimensional steady conduction heat transfer
through cylindrical wall in the radial direction is expresses in which of the
following functions?
Selected Answer: a.
linear
Answers: a.
linear
b.
exponential
c.
logarithmic
d.
trigonometric
• Question 9
0 out of 3.3 points
For balancing single cylinder engine a counter weight is added to:
Selected Answer: a.
Piston
Answers: a.
Piston
b.
Piston pin
c.
Crank
d.
Cam
• Question 10
0 out of 3.3 points
Which of the following is the Stefan – Boltzmann constant?
Selected Answer: [None Given]
Answers: a.
4.78 x 10-10 W/m2K4
b.
5.77 x 10-7 W/m2K4
c.
5.67 x 10-8 W/m2K4
d.
7.67 x 10-9 W/m2K4
• Question 11
0 out of 3.3 points
A type of water turbine where a jet of water is made to fall on the blades or
buckets and due to the impulse of water, the turbine starts to move.
Selected Answer: [None Given]
Answers: a.
Steam turbine
b.
Reaction turbine
c.
Pelton wheel
d.
Francis turbine
• Question 12
0 out of 3.3 points
In a hydro – electric plant using a Francis turbine with medium head, the speed can
be regulated using the
Selected Answer: [None Given]
Answers: a.
Weir
b.
Wicket gate
c.
Nozzle
d.
Deflector gate
• Question 13
0 out of 3.3 points
What happens to the heat transferred radially across insulated pipe per unit
area?
Selected Answer: [None Given]
Answers: a.
Decrease from pipe wall to insulated surface
b.
Decrease with the increase in thermal
conductivity
c.
Partially increases from pipe wall to insulated
surface
d.
The heat will flow at constant rate
• Question 14
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Pelton
b.
Hero
c.
Bankl
d.
Parson
• Question 15
0 out of 3.3 points
A colorless, odorless mixture of nitrogen and oxygen with traces of other gases
water vapor and same impurities.
Selected Answer: [None Given]
Answers: a.
Helium
b.
Air
c.
Nitrite
d.
Water gas
• Question 16
0 out of 3.3 points
In order to emit electromagnetic radiation, an object must be at a temperature:
Selected Answer: [None Given]
Answers: a.
Above that of its surroundings
b.
Above 0 K
c.
Above 0°C
d.
High enough for it to glow
• Question 17
0 out of 3.3 points
The following factors are necessary to define a thermodynamic cycle except:
Selected Answer: [None Given]
Answers: a.
High and low temperature
b.
The means of doing work on the system
c.
Working substance
d.
The time it takes to complete the cycle
• Question 18
0 out of 3.3 points
What do you call the weight of the column of air above the earth’s surface?
Selected Answer: [None Given]
Answers: a.
Air pressure
b.
Atmospheric pressure
c.
Aerostatic pressure
d.
Wind pressure
• Question 19
0 out of 3.3 points
In Stirling and Ericson cycle, regeneration can
Selected Answer: [None Given]
Answers: a.
Control efficiency
b.
Decrease efficiency
c.
Increase efficiency
d.
Limit efficiency
• Question 20
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are negligible or
insignificant, the work input to an adiabatic compressor is___________.
Selected Answer: [None Given]
Answers: a.
Zero
b.
Infinity
c.
Equal to change in enthalpy
d.
Negligible
• Question 21
0 out of 3.3 points
In a four stroke engine, for the combustion of one liter of fuel, the volume of air
needed would approximately
Selected Answer: [None Given]
Answers: a.
1 cu. m
b.
5-7 cu. m
c.
9-10 cu. m
d.
2 cu. m
• Question 22
0 out of 3.3 points
What is the equation for the work done by a constant temperature system?
Selected Answer: [None Given]
Answers: a.
W = RT ln (V2/V1)
b.
W = mR(T2-T1) ln(V2/V1)
c.
W = MRT ln(V2/V1)
d.
W = mRT ln(V2-V1)
• Question 23
0 out of 3.3 points
In a p-t diagram of a pure substance, the curve separating the solid phase from
liquid phase is:
Selected Answer: [None Given]
Answers: a.
fusion curve
b.
sublimation point
c.
boiling point
d.
vaporization curve
• Question 24
0 out of 3.3 points
All of the following process are irreversible except.
Selected Answer: [None Given]
Answers: a.
an unrestrained expansion of a gas
b.
an isentropic deceleration of a moving perfect fluid.
c.
stirring a viscous fluid
d.
phase changes
• Question 25
0 out of 3.3 points
The true mean temperature difference is known as:
Selected Answer: [None Given]
Answers: a.
the trigonometric mean temperature difference
b.
the average mean temperature difference
c.
the exponential mean temperature difference
d.
the logarithmic mean temperature difference
• Question 26
0 out of 3.3 points
The function of a heat exchanger is to:
Selected [None Given]
Answer:
Answers: a.
Exchange heat to increase energy of the flow
b.
Transfer heat from one fluid to another
c.
Increase the total energy of the flow
d.
Increase the water temperature entering the boiler and decrease
combustion requirements
• Question 27
0 out of 3.3 points
A specific property
Selected Answer: [None Given]
Answers: a.
is an extensive property multiplied by mass
b.
is independent of mass
c.
defines a specific variable (e.g., temperature)
d.
is dependent of the phase of the substance
• Question 28
0 out of 3.3 points
A nozzle is used to
Selected Answer: [None Given]
Answers: a.
decrease velocity and increase pressure
b.
decrease velocity as well as pressure
c.
increase velocity as well as pressure
d.
increase velocity and decrease pressure
• Question 29
0 out of 3.3 points
Percent excess air is the difference between the air actually supplied and the
theoretically required divided by
Selected Answer: [None Given]
Answers: a.
The theoretically air supplied
b.
The sufficient air supplied
c.
The deficiency of air supplied
d.
The actually air supplied
• Question 30
0 out of 3.3 points
The general chemical formula for all hydrocarbons is CnHm. In different
combination of interest, as internal combustion engine fuel, m varies from:
Selected Answer: [None Given]
Answers: a.
2 to 54
b.
2 to 26
c.
1 to 54
d.
1 to 26
• Question 1
3.3 out of 3.3 points
Which of the following devices used to measure the discharge of outflow from a
vessel?
Selected Answer: a.
Orifice
Answers: a.
Orifice
b.
Pitot tube
c.
Obstruction meter
d.
Pump head
• Question 2
0 out of 3.3 points
Critical properties refer to
Selected a.
Answer: property values where liquid and gas phase are indistinguishable
Answers: a.
property values where liquid and gas phase are indistinguishable
b.
heat required for phase change and important for energy
production
c.
properties having to do with equilibrium conditions, such as the
Gibbs and Helmholtz
d.
extremely important properties, such as temperature and
pressure
• Question 3
3.3 out of 3.3 points
Clog point of an oil refer to:
Selected a.
Answer: the temperature at which paraffin ad waxes in oil start
precipitating
Answers: a.
the temperature at which paraffin ad waxes in oil start
precipitating
b.
the temperature at which oil solidifies
c.
the level of impurities beyond which oil ceases to flow
d.
the point of maximum contamination of oil
• Question 4
0 out of 3.3 points
At 101.325 kPa, the boiling point of water is 100C. If the pressure is decrease,
the boiling temperature will:
Selected Answer: a.
Drop to zero
Answers: a.
Drop to zero
b.
Increase
c.
Remain the same
d.
Decrease
• Question 5
0 out of 3.3 points
In a p-t diagram of a pure substance, the curve separating the solid phase from
liquid phase is:
Selected Answer: a.
boiling point
Answers: a.
boiling point
b.
sublimation point
c.
vaporization curve
d.
fusion curve
• Question 6
0 out of 3.3 points
The pressure exerted in a vessel by a mixture of gasses is equal to the sum of the
pressure that each separate gas would exert if it alone occupies the whole volume
of the vessel.
Selected Answer: a.
Charles law
Answers: a.
Charles law
b.
Avogadro’s law
c.
Dalton’s law
d.
Boyle’s law
• Question 7
0 out of 3.3 points
A substance is oxidized when which of the following occurs?
Selected Answer: a.
if absorb energy
Answers: a.
if absorb energy
b.
it turns red
c.
it gives off heat
d.
it loses electrons
• Question 8
3.3 out of 3.3 points
A process in which the system departs from equilibrium state only infinitesimally
at every instant.
Selected Answer: a.
quasi-static process
Answers: a.
quasi-static process
b.
cyclic process
c.
irreversible process
d.
reversible process
• Question 9
0 out of 3.3 points
The solid – liquid equilibrium of Zinc is at what temperature?
Selected Answer: a.
231.9°C
Answers: a.
231.9°C
b.
419.505°C
c.
444.60°C
d.
630.9°C
• Question 10
0 out of 3.3 points
Excess oil consumption in engine may be because of:
Selected Answer: [None Given]
Answers: a.
Poor quality or improper viscosity of engine oil
b.
Any of the other choices
c.
Excessive oil pressure
d.
Leakage of oil through oil pan gasket
• Question 11
0 out of 3.3 points
The coefficient of velocity is equal to the:
Selected [None Given]
Answer:
Answers: a.
Actual velocity divided by the theoretical velocity
b.
Product of the coefficient of discharge and the coefficient of
contraction
c.
Difference of the coefficient of discharge and the coefficient of
contraction
d.
Sum of the coefficient of discharge and the coefficient of
contraction
• Question 12
0 out of 3.3 points
The fuel is injected into the cylinder in diesel engine when the piston is:
Selected Answer: [None Given]
Answers: a.
Exactly at B.D.C after compression stroke
b.
Approaching B.D.C during exhaust stroke
c.
Approaching T.D.C during compression stroke
d.
Exactky at T.D.C before compression stroke
• Question 13
0 out of 3.3 points
In a hot wire anemometer the rate of heat loss from sensing element is a function
of:
Selected Answer: [None Given]
Answers: a.
Mass rate of flow
b.
All of the other choices
c.
Pressure
d.
Velocity of flow
• Question 14
0 out of 3.3 points
A steam nozzle changes
Selected Answer: [None Given]
Answers: a.
heat energy into potential energy
b.
potential energy into heat energy
c.
kinetic energy into heat energy
d.
heat energy into kinetic energy
• Question 15
0 out of 3.3 points
Which of the following relations is not applicable in a free expansion process?
Selected Answer: [None Given]
Answers: a.
Work done is zero
b.
Change in temperature is zero
c.
Heat supplied is zero
d.
Heat rejected is zero
• Question 16
0 out of 3.3 points
The changing of solid directly to vapor without passing through the liquid state is
called
Selected Answer: [None Given]
Answers: a.
sublimation
b.
vaporization
c.
condensation
d.
evaporation
• Question 17
0 out of 3.3 points
A substance that is able to absorb liquids or gasses and is used for removing
them from a given region or medium.
Selected Answer: [None Given]
Answers: a.
Cohesive
b.
Absorbent
c.
Adhesive
d.
Adsorbent
• Question 18
0 out of 3.3 points
Air that controls the rat of combustion in the combustion chamber is known as:
Selected Answer: [None Given]
Answers: a.
Primary air
b.
Excess air
c.
Control air
d.
Secondary air
• Question 19
0 out of 3.3 points
The equivalent of ratio of emissive power to absorptivity for bodies in thermal
equilibrium is described by:
Selected Answer: [None Given]
Answers: a.
The logarithmic mean temperature difference
b.
Fourier’s law
c.
Newton’s Law
d.
Kirchoff’s law
• Question 20
0 out of 3.3 points
The properties that are independent of the mass the system such as temperature,
pressure, density and voltage
Selected Answer: [None Given]
Answers: a.
specific properties
b.
intensive properties
c.
extensive properties
d.
state properties
• Question 21
0 out of 3.3 points
In sugar mills can just is evaporated in:
Selected Answer: [None Given]
Answers: a.
Horizontal tube evaporator
b.
Long vertical tube evaporators
c.
Zigzag tube evaporators
d.
Short vertical tube evaporators
• Question 22
0 out of 3.3 points
The law which states that “ the ratio of the emissive powers to absorptivities are
equal when the two bodies are in thermal equilibrium” is known as:
Selected Answer: [None Given]
Answers: a.
Stefan-Boltzman law
b.
Kirchoff’s law of radiation
c.
Newton’s law of convection
d.
Fourier’s law
• Question 23
0 out of 3.3 points
In the polytropic process we have pvn = constant, if the value of n is infinitely large,
the process is called
Selected Answer: [None Given]
Answers: a.
Adiabatic process
b.
Constant volume process
c.
Constant pressure process
d.
Constant temperature process
• Question 24
0 out of 3.3 points
In parallel pipe system originating and terminating in common junctions,
Selected Answer: [None Given]
Answers: a.
Mass flows through each branch are equal
b.
Flow areas of each branch are equal
c.
Lengths of each branch are equal
d.
Pressure drops through each branch are equal
• Question 25
0 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called _________.
Selected Answer: [None Given]
Answers: a.
Sink
b.
Heat reservoir
c.
Cold reservoir
d.
Source
• Question 26
0 out of 3.3 points
Heat exchange process where in the product of pressure and volume remains
constant called:
Selected Answer: [None Given]
Answers: a.
Isentropic process
b.
Heat exchange process
c.
Hyperbolic process
d.
Throttling process
• Question 27
0 out of 3.3 points
Atomic weights of the elements in the periodic table are not whole numbers
because of:
Selected [None Given]
Answer:
Answers: a.
The existence of isotopes
b.
The exchange of reference of the atomic mass unit from oxygen- 16
to carbon -12 in 1961
c.
Round- off error in calculating atomic weights
d.
Imprecise measurements during the development of the periodic
table
• Question 28
0 out of 3.3 points
The thermal resistance for one-dimensional steady conduction heat transfer
through cylindrical wall in the radial direction is expresses in which of the
following functions?
Selected Answer: [None Given]
Answers: a.
logarithmic
b.
trigonometric
c.
exponential
d.
linear
• Question 29
0 out of 3.3 points
One could expect the possibility of Froude number similarity in all of the ff cases
except:
Selected Answer: [None Given]
Answers: a.
Motion of a fluid jet
b.
Surge and flood waves
c.
Subsonic airfoils
d.
Flow over spillways
• Question 30
0 out of 3.3 points
What is the SI unit of pressure?
Selected Answer: [None Given]
Answers: a.
pascal
b.
Kg/cm2
c.
dynes/cm2
d.
psi
• Question 1
0 out of 3.3 points
Which of the following is the instrument used to measure fluid velocity?
Selected Answer: a.
Orsat apparatus
Answers: a.
Orsat apparatus
b.
Pitot tube
c.
Anemometer
d.
Viscosimeter
• Question 2
0 out of 3.3 points
Which of the following needs to be filtered in a diesel engine?
Selected Answer: a.
Air and diesel oil only
Answers: a.
Air and diesel oil only
b.
Lubricating oil only
c.
Air only
d.
Air, diesel oil and lubricating oil
• Question 3
3.3 out of 3.3 points
The temperature at which lubricating will form a cloud.
Selected Answer: a.
Cloud point
Answers: a.
Cloud point
b.
Boiling point
c.
Pour point
d.
Critical point
• Question 4
0 out of 3.3 points
Form of energy associated with the kinetic energy of the random motion of large
number of molecules.
Selected Answer: a.
kinetic energy
Answers: a.
kinetic energy
b.
heat
c.
internal enegy
d.
heat of fusion
• Question 5
0 out of 3.3 points
The work done by a force of R Newtons moving in a distance of L meters is
converted entirely into kinetic energy and expressed by the equation:
Selected Answer: a.
RL = 2MV
Answers: a.
RL = 2MV
b.
RL = 2MV2
c.
RL = 1/2 MV
d.
RL = 1/2 MV2
• Question 6
3.3 out of 3.3 points
Flash point for diesel fuel oil should be:
Selected Answer: a.
Maximum 49 C
Answers: a.
Maximum 49 C
b.
Maximum 200 C
c.
Maximum 300 C
d.
Maximum 490 C
• Question 7
0 out of 3.3 points
Radiant heat transfer is described by :
Selected Answer: a.
Fourier’s Law
Answers: a.
Fourier’s Law
b.
Newton’s Law
c.
The Logarithmic mean temperature
d.
Kirchoff’s Law
• Question 8
3.3 out of 3.3 points
What is the heat transfer due to density differential?
Selected Answer: a.
Convection
Answers: a.
Convection
b.
Nuclear
c.
Radiation
d.
Conduction
• Question 9
0 out of 3.3 points
In the polytropic process, PV=constant, if the value of n is infinitely large, the
process is
Selected Answer: a.
polytropic
Answers: a.
polytropic
b.
Isobaric
c.
isothermal
d.
isometric
• Question 10
0 out of 3.3 points
It is the term used to describe the energy of the body that can be transmitted in
the form of heat.
Selected Answer: a.
enthalpy
Answers: a.
enthalpy
b.
entropy
c.
internal energy
d.
thermal energy
• Question 11
0 out of 3.3 points
A system in which there is no exchange of matter with the surrounding or mass
does not cross its boundaries
Selected Answer: [None Given]
Answers: a.
open system
b.
isolated system
c.
closed system
d.
nonflow system
• Question 12
0 out of 3.3 points
What is the value of the Prandt’l number for air?
Selected Answer: [None Given]
Answers: a.
0.7
b.
67
c.
6.7
d.
10
• Question 13
0 out of 3.3 points
Hydrocarbons with 5 to 15 carbon atoms are:
Selected Answer: [None Given]
Answers: a.
Commercial fuels
b.
Mixtures of many kinds of hydro carbons
c.
Referred to as heavy oils
d.
More or less volatile light oils
• Question 14
0 out of 3.3 points
The king pin inclination is generally:
Selected Answer: [None Given]
Answers: a.
Between 2 and 5
b.
Between 1 and 2
c.
More than 9
d.
Less than 0.5
• Question 15
0 out of 3.3 points
The themodynamic cycle used in a thermal power plant is
Selected Answer: [None Given]
Answers: a.
Joule
b.
Bryton
c.
Rankine
d.
Ericson
• Question 16
0 out of 3.3 points
Automobile radiator is filled with:
Selected Answer: [None Given]
Answers: a.
Alkaline water
b.
Hard water
c.
Acidic water
d.
Soft water
• Question 17
0 out of 3.3 points
The relationship between the total pressure of a mixture of non-reacting gases
and the partial pressures of constituents is given by:
Selected Answer: [None Given]
Answers: a.
volumetric fractions
b.
gravimetric fractions
c.
Dalton’s law
d.
mole fractions
• Question 18
0 out of 3.3 points
Equation of state for a single component can be any of the following except:
Selected [None Given]
Answer:
Answers: a.
relationship mathematically interrelating thermodynamics
properties of the material
b.
a mathematical expression defining a path between states
c.
the ideal gas law
d.
any relationship interrelating 3 or more state functions
• Question 19
0 out of 3.3 points
The relationship between the total volume of a mixture of non-reacting gases
and their partial volume is given by:
Selected Answer: [None Given]
Answers: a.
mole fractions
b.
Dalton’s law
c.
gravimetric fractions
d.
Amagat’s law
• Question 20
0 out of 3.3 points
A substance that is homogeneous in composition and homogeneous and invariable
in chemical aggregation
Selected Answer: [None Given]
Answers: a.
water
b.
vapor
c.
simple substance
d.
pure substance
• Question 21
0 out of 3.3 points
In a four stroke engine if a valve opens 25 before B.D.C. and close 10 after T.D.C the
valve should be:
Selected Answer: [None Given]
Answers: a.
Spring valve
b.
Inlet valve
c.
Puppet valve
d.
Exhaust valve
• Question 22
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Napier constant
b.
Boltzmann’z constant
c.
Joule’s constant
d.
Maxwell’s constant
• Question 23
0 out of 3.3 points
The function of a turbine is to:
Selected Answer: [None Given]
Answers: a.
Transfer heat from one fluid to another
b.
Increase the total energy content of the flow
c.
Extract energy from the flow
d.
Exchange heat to increase energy to the flow
• Question 24
0 out of 3.3 points
The total mass per unit volume of any substance
Selected Answer: [None Given]
Answers: a.
Specific weight
b.
Density
c.
Specific gravity
d.
Specific Volume
• Question 25
0 out of 3.3 points
Which of the following can be a geometric view factor of a gray body?
Selected Answer: [None Given]
Answers: a.
less than one
b.
equal to one
c.
greater than zero but less than one
d.
greater than one
• Question 26
0 out of 3.3 points
The temp of the fluid flowing under pressure through a pipe is usually measured
by:
Selected Answer: [None Given]
Answers: a.
A thermocouple
b.
All of the other choices
c.
A glass thermometer
d.
An electric resistance thermometer
• Question 27
0 out of 3.3 points
A substance that exists , or is regarded as existing, as a continuous characterized by
a low resistance to flow and the tendency to assume the shape of its container
Selected Answer: [None Given]
Answers: a.
atom
b.
vapor
c.
fluid
d.
molecule
• Question 28
0 out of 3.3 points
Power may be expressed in units of
Selected Answer: [None Given]
Answers: a.
btu/hr
b.
ft-lb
c.
btu
d.
kw-hr
• Question 29
0 out of 3.3 points
Which is not a viscosity rating?
Selected Answer: [None Given]
Answers: a.
Centipoises
b.
Entropy degrees API
c.
SSU
d.
Redwood
• Question 30
0 out of 3.3 points
A theoretical gas which strictly follows boyle’s law and Charles law of gasses.
Selected Answer: [None Given]
Answers: a.
perfect gas
b.
imperfect gas
c.
universal gas
d.
combined gas
• Question 1
0 out of 3.3 points
A valve in the carburetor of an internal combustion engines which regulates the
proportion of air gasoline vapors entering the cylinder
Selected Answer: a.
Globe valve
Answers: a.
Globe valve
b.
Choke valve
c.
Check valve
d.
Gate valve
• Question 2
0 out of 3.3 points
When a certain mass of fluid in particular state passes through a series of process
and returns to its initial state, it undergoes a:
Selected Answer: a.
process
Answers: a.
process
b.
rotation
c.
cycle
d.
revolution
• Question 3
0 out of 3.3 points
A steam nozzle changes
Selected Answer: a.
heat energy into potential energy
Answers: a.
heat energy into potential energy
b.
heat energy into kinetic energy
c.
potential energy into heat energy
d.
kinetic energy into heat energy
• Question 4
3.3 out of 3.3 points
In convection heat transfer, what mechanism heat transfer where the fluid
moves due to the decrease in its density caused by increase in temperature?
Selected Answer: a.
Natural convection
Answers: a.
Natural convection
b.
Radial convection
c.
Density convection
d.
Forced convection
• Question 5
0 out of 3.3 points
If any one or more properties of a system change, the system is said to have
undergone a ________.
Selected Answer: c.
cycle
Answers: a.
process
b.
flow
c.
cycle
d.
control
• Question 6
3.3 out of 3.3 points
How does an adiabatic process compare to an isentropic process?
Selected Answer: a.
both Heat transfer = 0 ; Isentropic : Reversible
Answers: a.
both Heat transfer = 0 ; Isentropic : Reversible
b.
adiabatic: heat transfer = 0, Isentropic: heat transfer = 0
c.
adiabatic: heat transfer = 0, Isentropic: heat transfer = 0
d.
adiabatic: Reversible, Isentropic: not reversible
• Question 7
3.3 out of 3.3 points
The natural direction of the heat flow between two reservoirs is dependent on
which of the following?
Selected Answer: a.
Their temperature difference
Answers: a.
Their temperature difference
b.
Their pressures
c.
Their internal energy
d.
Their states, whether solid, liquid and gas
• Question 8
0 out of 3.3 points
The properties that are dependent upon the mass of the system and are total
values such as total volume and total infernal energy
Selected Answer: [None Given]
Answers: a.
intensive properties
b.
specific properties
c.
extensive properties
d.
state properties
• Question 9
0 out of 3.3 points
As a rule before the piston are removed, it is essential to remove the :
Selected Answer: [None Given]
Answers: a.
Circlip
b.
Gudgeon pin
c.
Crankshaft
d.
Piston rings
• Question 10
0 out of 3.3 points
Which of the following statements is not true for real gases?
Selected [None Given]
Answer:
Answers: a.
Real gases are subjected to attractive forces between molecules
(e.g. Van der Waal’s forces)
b.
Molecules occupy a volume not negligible in comparison to the
total volume of gas
c.
Real gases are found only rarely in nature
d.
The law of corresponding states may be used for real gases
• Question 11
0 out of 3.3 points
Hot spots
Selected Answer: [None Given]
Answers: a.
Are the hotter spots in engines
b.
Are the defects in S.I in engines
c.
Do not exist in engines
d.
Are the spots where heavier functions of fuel are vaporized
• Question 12
0 out of 3.3 points
Each of the following is correct values of standard atmospheric pressure except:
Selected Answer: [None Given]
Answers: a.
1,000 atm
b.
760 torr
c.
14.962 psia
d.
1013 mmHg
• Question 13
0 out of 3.3 points
The term given to the collection of matter under consideration enclosed within a
boundary.
Selected Answer: [None Given]
Answers: a.
matter
b.
atoms
c.
environment
d.
system
• Question 14
0 out of 3.3 points
What fuel gas obtained by the destructive distillation of soft coal
Selected Answer: [None Given]
Answers: a.
Water gas
b.
Gas scrub
c.
Alcogas
d.
Coal gas
• Question 15
0 out of 3.3 points
For the same heat input and same compression ratio:
Selected Answer: [None Given]
Answers: a.
Efficiency depends mainly on the working substance
b.
Otto cycle is less efficient than diesel cycle
c.
None of the other choices is correct
d.
Both otto cycle and diesel cycle are equally efficient
• Question 16
0 out of 3.3 points
Under ideal conditions, isothermal, isobaric, isochoric, and adiabatic process are;
Selected Answer: [None Given]
Answers: a.
Static process
b.
Dynamic process
c.
Quasi – static process
d.
Stable process
• Question 17
0 out of 3.3 points
A mollier chart of thermodynamic properties is shown in which of the following
diagrams?
Selected Answer: [None Given]
Answers: a.
p-h diagram
b.
h-S diagram
c.
P-V diagram
d.
T-S diagram
• Question 18
0 out of 3.3 points
In a four stroke engine, for the combustion of one liter of fuel, the volume of air
needed would approximately
Selected Answer: [None Given]
Answers: a.
1 cu. m
b.
5-7 cu. m
c.
9-10 cu. m
d.
2 cu. m
• Question 19
0 out of 3.3 points
Gudgeon pins are made of:
Selected Answer: [None Given]
Answers: a.
Same materials as that of piston
b.
Cast iron
c.
Hardened and ground steel
d.
None of these
• Question 20
0 out of 3.3 points
If a substance temperature is greater than the saturation temperature, the
substance is a ________.
Selected Answer: [None Given]
Answers: a.
saturated vapor
b.
wet vapor
c.
subcooled liquid
d.
superheated vapor
• Question 21
0 out of 3.3 points
The smallest subdivision of an element that can take place in a chemical reaction is
a/an
Selected Answer: [None Given]
Answers: a.
Electron
b.
Atom
c.
Molecule
d.
Proton
• Question 22
0 out of 3.3 points
For balancing single cylinder engine a counter weight is added to:
Selected Answer: [None Given]
Answers: a.
Cam
b.
Piston
c.
Crank
d.
Piston pin
• Question 23
0 out of 3.3 points
A correction of LMTD is essential in case of:
Selected Answer: [None Given]
Answers: a.
Counter current heat exchanger
b.
Cross flow heat exchanger
c.
None of the other choices
d.
Parallel flow hear exchanger
• Question 24
0 out of 3.3 points
The locus of elevation to which water will rise in the piezometer tube is termed:
Selected Answer: [None Given]
Answers: a.
Energy gradient
b.
Critical path
c.
Hydraulic gradient
d.
Friction head
• Question 25
0 out of 3.3 points
Steam at 2 kPa is saturated at 17.5C. In what state will the state be at 40c if the
pressure is 2 kPa?
Selected Answer: [None Given]
Answers: a.
Supersaturated
b.
Subcooled
c.
Saturated
d.
Superheated
• Question 26
0 out of 3.3 points
Which of the following gasses can be used to measure the lowest temperature?
Selected Answer: [None Given]
Answers: a.
Nitrogen
b.
Helium
c.
Hydrogen
d.
Oxygen
• Question 27
0 out of 3.3 points
The passing of heat energy from molecule to molecule through a substance
Selected Answer: [None Given]
Answers: a.
Conservation
b.
Convection
c.
Conduction
d.
Radiation
• Question 28
0 out of 3.3 points
Which thermodynamic property best describes the molecular activity of a
substance?
Selected Answer: [None Given]
Answers: a.
Entropy
b.
Internal energy
c.
External energy
d.
Enthalpy
• Question 29
0 out of 3.3 points
Theoretically air needed for the combustion of one kg of fuel is:
Selected Answer: [None Given]
Answers: a.
100kg
b.
14.5 kg
c.
27.4 kg
d.
16.7 kg
• Question 30
0 out of 3.3 points
For an irreversible process, what is true about the change in entropy of the system
and surroundings
Selected Answer: [None Given]
Answers: a.
ds > 0
b.
ds = dq/dt
c.
ds < 0
d.
ds = 0
• Question 1
0 out of 3.3 points
What usually happens to the surrounding when water vapor condenses?
Selected Answer: a.
The surrounding temperature decreases
Answers: a.
The surrounding temperature decreases
b.
It neither warm nor cold the surrounding
c.
It warms the surrounding
d.
It neither warm nor cold the surrounding
• Question 2
0 out of 3.3 points
What is thermal diffusivity?
Selected Answer: a.
A configuration for heat conduction
Answers: a.
A configuration for heat conduction
b.
A mathematical formula
c.
A dimensionless parameter
d.
A physical property of the material
• Question 3
0 out of 3.3 points
The solid – liquid equilibrium of Gold is at what temperature?
Selected Answer: a.
1774°C
Answers: a.
1774°C
b.
960.8°C
c.
1063°C
d.
630.5°C
• Question 4
0 out of 3.3 points
How does an adiabatic process compare to an isentropic process?
Selected Answer: b.
adiabatic: heat transfer = 0, Isentropic: heat transfer = 0
Answers: a.
both Heat transfer = 0 ; Isentropic : Reversible
b.
adiabatic: heat transfer = 0, Isentropic: heat transfer = 0
c.
adiabatic: heat transfer = 0, Isentropic: heat transfer = 0
d.
adiabatic: Reversible, Isentropic: not reversible
• Question 5
0 out of 3.3 points
The combination of enthalpy and kinetic energy of fluid is termed as:
Selected Answer: a.
Latent enthalpy
Answers: a.
Latent enthalpy
b.
Heat enthalpy
c.
Throttling enthalpy
d.
Stagnation enthalpy
• Question 6
3.3 out of 3.3 points
Diesel engine fuels are rated by:
Selected Answer: a.
Cetane number
Answers: a.
Cetane number
b.
Octane number
c.
Calorific value
d.
Specific gravity
• Question 7
3.3 out of 3.3 points
Common causes for excessive oil consumption
Selected Answer: a.
High speed and worn engine
Answers: a.
High speed and worn engine
b.
Heavy oil and light bearings
c.
Frequent oil changes
d.
Short trips and cold weather
• Question 8
3.3 out of 3.3 points
Equilibrium condition exists in all except which of the following?
Selected a.
Answer: in a steady state flow process
Answers: a.
in a steady state flow process
b.
in reversible processes
c.
in processes where driving forces are infinitesimals
d.
where nothing can occur without an effect on the system’s
surrounding
• Question 9
0 out of 3.3 points
In natural convection a heated portion of a fluids moves because:
Selected Answer: [None Given]
Answers: a.
Of currents in the surrounding fluid
b.
Its molecules motions become aligned
c.
Of molecular collisions within it
d.
Its density is less than that of the surrounding fluid
• Question 10
0 out of 3.3 points
Which of the following types of flowmeters is most accurate?
Selected Answer: [None Given]
Answers: a.
Venturi tube
b.
stop valve
c.
Foam type
d.
Flow nozzle
• Question 11
0 out of 3.3 points
What do you call a substance that is able to absorb liquids or gases and is
usually used for removing liquids(or gases) from a given medium or region?
Selected Answer: [None Given]
Answers: a.
adhesive
b.
adsorbent
c.
liquifier
d.
absorbent
• Question 12
0 out of 3.3 points
A spark voltage requires voltage of:
Selected Answer: [None Given]
Answers: a.
124 V
b.
220 V
c.
440 V
d.
112 V
• Question 13
0 out of 3.3 points
A system in which there is no exchange of matter with the surrounding or mass
does not cross its boundaries
Selected Answer: [None Given]
Answers: a.
isolated system
b.
closed system
c.
nonflow system
d.
open system
• Question 14
0 out of 3.3 points
In order to emit electromagnetic radiation, an object must be at a temperature:
Selected Answer: [None Given]
Answers: a.
Above 0 K
b.
High enough for it to glow
c.
Above 0°C
d.
Above that of its surroundings
• Question 15
0 out of 3.3 points
In the absence of any heat and work interactions and any changes in potential
energy, the stagnation enthalpy of a fluid remains constant during
Selected Answer: [None Given]
Answers: a.
Variable flow
b.
Turbulent flow
c.
Steady flow
d.
Unsteady flow
• Question 16
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
White body
b.
Black body
c.
Gray body
d.
Red hot body
• Question 17
0 out of 3.3 points
The lowest portion to storage basin from where the water is not drawn is:
Selected Answer: [None Given]
Answers: a.
Sub-soil storage
b.
Dead storage
c.
Spring reserve
d.
Bottom storage
• Question 18
0 out of 3.3 points
In conduction heat transfer, what happens to the heat transfer per unit time
when the thermal conductivity decreases?
Selected Answer: [None Given]
Answers: a.
the heat flow will decrease
b.
the heat flow will increase
c.
the heat flow will partially increase and then will decrease
d.
the heat flow remains constant
• Question 19
0 out of 3.3 points
What is the true about the polytropic exponent n for a perfect gas undergoing an
isobaric process?
Selected Answer: [None Given]
Answers: a.
n=8
b.
n<0
c.
n=0
d.
n >0
• Question 20
0 out of 3.3 points
A small enough particles suspended in a fluid will exhibit small random
movements due to the statistical collision of fluid molecules on the particle’s
surface. This motion is called
Selected Answer: [None Given]
Answers: a.
Kinetic gas motion
b.
Brownian motion
c.
Rectilinear motion
d.
Boltzmann motion
• Question 21
0 out of 3.3 points
The increase in velocity past the throat is due to the rapid decrease in the:
Selected Answer: [None Given]
Answers: a.
Fluid temperature
b.
Fluid specific volume
c.
Fluid pressure
d.
Fluid density
• Question 22
0 out of 3.3 points
All of the following are types of chemical bonds except:
Selected Answer: [None Given]
Answers: a.
Metallic bonds
b.
Covalent bonds
c.
Nuclear bonds
d.
Ionic bonds
• Question 23
0 out of 3.3 points
The heat needed by the body to change its phase without changing its temperature.
Selected Answer: [None Given]
Answers: a.
sensible heat
b.
heat transfer
c.
specific heat
d.
latent heat
• Question 24
0 out of 3.3 points
Rare gases such as helium, argon, krypton, xenon and radon that are non-reactive
are called
Selected Answer: [None Given]
Answers: a.
Non-reactants
b.
Inert gases
c.
Stop gases
d.
Residual gases
• Question 25
0 out of 3.3 points
The law which states that “ the ratio of the emissive powers to absorptivities are
equal when the two bodies are in thermal equilibrium” is known as:
Selected Answer: [None Given]
Answers: a.
Kirchoff’s law of radiation
b.
Fourier’s law
c.
Newton’s law of convection
d.
Stefan-Boltzman law
• Question 26
0 out of 3.3 points
Which of the following best describe function of heat exchanger?
Selected Answer: [None Given]
Answers: a.
transfer heat from one fluid to another
b.
exchange heat to increase energy to the flow
c.
increase the water temperature entering the
d.
evaluate the total energy content of the flow
• Question 27
0 out of 3.3 points
A finely divided carbon deposit by the smoke or flame is called
Selected Answer: [None Given]
Answers: a.
Fly ash
b.
Residue
c.
Soot
d.
All of the choices
• Question 28
0 out of 3.3 points
The number of exhaust manifolds in a V-8 engine is:
Selected Answer: [None Given]
Answers: a.
One
b.
There is no exhaust manifold
c.
Four
d.
Two
• Question 29
0 out of 3.3 points
To measure the clearance between the valve and tappet of an automobile engine
we use a
Selected Answer: [None Given]
Answers: a.
Vernier scale
b.
Slip gauge
c.
Pneumatic gauge
d.
Feeler gauge
• Question 30
0 out of 3.3 points
Which of the following liquids that has the highest thermal conductivity?
Selected Answer: [None Given]
Answers: a.
Alcohol
b.
Water
c.
Gasoline
d.
Glycerin
• Question 1
0 out of 3.3 points
The absolute zero in Celsius scale is:
Selected Answer: a.
273
Answers: a.
273
b.
100
c.
0
d.
-273
• Question 2
3.3 out of 3.3 points
Which of the following occurs in a reversible polytropic process?
Selected Answer: a.
Some heat transfer occurs
Answers: a.
Some heat transfer occurs
b.
Enthalpy remains constant
c.
Internal energy does not change
d.
Entropy remains constant
• Question 3
3.3 out of 3.3 points
A nozzle is used to
Selected Answer: c.
increase velocity and decrease pressure
Answers: a.
decrease velocity as well as pressure
b.
decrease velocity and increase pressure
c.
increase velocity and decrease pressure
d.
increase velocity as well as pressure
• Question 4
0 out of 3.3 points
The matching of scale model and full-scale results for a fluid dynamic
phenomena with a free surface requires equality of:
Selected Answer: [None Given]
Answers: a.
Reynolds number
b.
Weber number
c.
Cauchy number
d.
Froude number
• Question 5
0 out of 3.3 points
The properties that are dependent upon the mass of the system and are total
values such as total volume and total infernal energy
Selected Answer: [None Given]
Answers: a.
extensive properties
b.
state properties
c.
specific properties
d.
intensive properties
• Question 6
0 out of 3.3 points
The reciprocal of density is?
Selected Answer: [None Given]
Answers: a.
Specific volume
b.
Specific weight
c.
Specific gravity
d.
Specific heat
• Question 7
0 out of 3.3 points
What is thermal diffusivity?
Selected Answer: [None Given]
Answers: a.
A mathematical formula
b.
A dimensionless parameter
c.
A configuration for heat conduction
d.
A physical property of the material
• Question 8
0 out of 3.3 points
A thermodynamic system that generally serves as a heat source or sink for another
system.
Selected Answer: [None Given]
Answers: a.
heat engine
b.
stirling engine
c.
combustion chamber
d.
heat reservoir
• Question 9
0 out of 3.3 points
The tendency of a pure compound to be composed of the same elements combined
in a definite proportion by mass
Selected Answer: [None Given]
Answers: a.
Le chatelier’s principle
b.
Avogadro’s law
c.
The law of definite proportions
d.
Boyle’s law
• Question 10
0 out of 3.3 points
What is the SI unit of pressure?
Selected Answer: [None Given]
Answers: a.
pascal
b.
Kg/cm2
c.
psi
d.
dynes/cm2
• Question 11
0 out of 3.3 points
Diesel engine fuels are rated by:
Selected Answer: [None Given]
Answers: a.
Octane number
b.
Calorific value
c.
Cetane number
d.
Specific gravity
• Question 12
0 out of 3.3 points
In a hot wire anemometer the rate of heat loss from sensing element is a function
of:
Selected Answer: [None Given]
Answers: a.
Mass rate of flow
b.
Velocity of flow
c.
All of the other choices
d.
Pressure
• Question 13
0 out of 3.3 points
The device for smoothing out the power impulses from the engine is known as:
Selected Answer: [None Given]
Answers: a.
Clutch
b.
differential
c.
Fly wheel
d.
Gear box
• Question 14
0 out of 3.3 points
Mechanical energy of pressure transformed into energy of heat
Selected Answer: [None Given]
Answers: a.
Kinetic energy
b.
Heat of compression
c.
Heat exchanger
d.
Enthalpy
• Question 15
0 out of 3.3 points
A gas produced by the combustion of fuel oil and cannot be found in the flue gases
is:
Selected Answer: [None Given]
Answers: a.
Nitrogen
b.
Hydrogen
c.
Oxygen
d.
Carbon dioxide
• Question 16
0 out of 3.3 points
The force of gravity on the body?
Selected Answer: [None Given]
Answers: a.
Specific gravity
b.
Specific weight
c.
Weight
d.
Specific volume
• Question 17
0 out of 3.3 points
During an adiabatic, internally reversible process, what is true about the change in
entropy?
Selected Answer: [None Given]
Answers: a.
it is always greater than zero
b.
it is always zero
c.
it is always less than zero
d.
it is temperature-dependent
• Question 18
0 out of 3.3 points
Amount of heat liberated by the complete combustion of a unit weight or volume of
fuel is:
Selected Answer: [None Given]
Answers: a.
Work compression
b.
Sensible heat
c.
Latent
d.
Heating value
• Question 19
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Napier constant
b.
Maxwell’s constant
c.
Boltzmann’z constant
d.
Joule’s constant
• Question 20
0 out of 3.3 points
What kind of bonding do common gases that exist in free state as diatomic
molecules experiences?
Selected Answer: [None Given]
Answers: a.
Metallic bonds
b.
Ionic bonds
c.
Covalent bonds
d.
Nuclear bonds
• Question 21
0 out of 3.3 points
Thermal conductivity of wood depends on which of the following:
Selected Answer: [None Given]
Answers: a.
Temperature
b.
Moisture
c.
All of the other choices
d.
Density
• Question 22
0 out of 3.3 points
Sticking valves
Selected Answer: [None Given]
Answers: a.
Valve springs of defective material
b.
Valve guided gummed
c.
Lubricating oil of poor quality
d.
Valve tappet clearance incorrect
• Question 23
0 out of 3.3 points
How do you classify a body that has an emissivity factor of 0.7?
Selected Answer: [None Given]
Answers: a.
White body
b.
Gray body
c.
Black body
d.
Theoretical body
• Question 24
0 out of 3.3 points
The primary purpose of a turbine in a fluid is to:
Selected Answer: [None Given]
Answers: a.
None of the other choices
b.
Add mass to the flow
c.
Add energy to the flow
d.
Extract energy from the flow
• Question 25
0 out of 3.3 points
What air pressure is needed of air starting a diesel engine?
Selected Answer: [None Given]
Answers: a.
150 psi
b.
450 psi
c.
250 psi
d.
350 psi
• Question 26
0 out of 3.3 points
During the fusion process, mass is lost and converted to energy according to:
Selected Answer: [None Given]
Answers: a.
The 2nd law of thermodynamics
b.
The Heisenburg uncertainty principle
c.
Einstein’s law
d.
The Compton’s law
• Question 27
0 out of 3.3 points
The function of a superheater is to:
Selected [None Given]
Answer:
Answers: a.
Increase the water temperature entering the boiler and decrease
combustion requirements
b.
Increase the total energy of the flow
c.
Transfer heat from one fluid to another
d.
Exchange heat to increase energy of the flow
• Question 28
0 out of 3.3 points
The temperature at which its vapor pressure is equal to the pressure exerted on
the liquid
Selected Answer: [None Given]
Answers: a.
absolute humidity
b.
boiling point
c.
thermal point
d.
calorimetry
• Question 29
0 out of 3.3 points
The following terms are included in the first law of thermodynamics for closed
system except:
Selected Answer: [None Given]
Answers: a.
Internal energy
b.
Kinetic energy
c.
Heat transferred in and out of the system
d.
Work done by or in the system
• Question 30
0 out of 3.3 points
All heat transfer processes:
Selected Answer: [None Given]
Answers: a.
Involve transfer of energy
b.
Obey first law of thermodynamics
c.
Involve temperature difference between the bodies
d.
Obey second law of thermodynamics
• Question 1
0 out of 3.3 points
The stagnation of state is called the isentropic stagnation state when the
stagnation process is:
Selected Answer: a.
reversible as well dynamic
Answers: a.
reversible as well dynamic
b.
reversible as well as adiabatic
c.
adiabatic
d.
isotropic
• Question 2
0 out of 3.3 points
In a closed vessel, when vaporization takes place, the temperature rises. Due to the
rising temperature, the pressure increases until an equilibrium is established
between the temperature and pressure. The temperature of equilibrium is called:
Selected Answer: a.
Dew point
Answers: a.
Dew point
b.
Ice point
c.
Boiling point
d.
Superheated temperature
• Question 3
0 out of 3.3 points
Which of the following cycles consists two isothermal and two constant volume
processes?
Selected Answer: a.
Diesel cycle
Answers: a.
Diesel cycle
b.
Ericsson cycle
c.
Stirling Cycle
d.
otto cycle
• Question 4
3.3 out of 3.3 points
The lowest portion to storage basin from where the water is not drawn is:
Selected Answer: a.
Dead storage
Answers: a.
Dead storage
b.
Spring reserve
c.
Sub-soil storage
d.
Bottom storage
• Question 5
0 out of 3.3 points
The natural direction of the heat flow between two reservoirs is dependent on
which of the following?
Selected Answer: a.
Their states, whether solid, liquid and gas
Answers: a.
Their states, whether solid, liquid and gas
b.
Their pressures
c.
Their internal energy
d.
Their temperature difference
• Question 6
0 out of 3.3 points
What usually happen when a vapor condenses into a liquid?
Selected Answer: a.
It evolves heat
Answers: a.
It evolves heat
b.
Its temperature increases
c.
It generates heat
d.
It boils with temperature less than 100°C
• Question 7
0 out of 3.3 points
A system in which there is no exchange of matter with the surrounding or mass
does not cross its boundaries
Selected Answer: [None Given]
Answers: a.
nonflow system
b.
isolated system
c.
closed system
d.
open system
• Question 8
0 out of 3.3 points
The heat of vaporization involves the change in enthalpy due to:
Selected Answer: [None Given]
Answers: a.
the energy released in a chemical reaction
b.
the change in phase is from solid to gas
c.
the change in phase in phase from liquid to gas
d.
the change in phase from solid to liquid
• Question 9
0 out of 3.3 points
The number of exhaust manifolds in a V-8 engine is:
Selected Answer: [None Given]
Answers: a.
Two
b.
There is no exhaust manifold
c.
One
d.
Four
• Question 10
0 out of 3.3 points
Which of the following relations is not applicable in the free expansion process?
Selected Answer: [None Given]
Answers: a.
Change in temperature is zero
b.
Work done is zero
c.
Heat supplied is zero
d.
Heat rejected is zero
• Question 11
0 out of 3.3 points
The property of liquid in which they extend resistance to angular or shear
deformation is:
Selected Answer: [None Given]
Answers: a.
Specific gravity
b.
Specific weight
c.
Density
d.
Viscosity
• Question 12
0 out of 3.3 points
The heat transfer term in the first law of thermodynamics may be due to any of
the following except:
Selected Answer: [None Given]
Answers: a.
Convection
b.
Conduction
c.
Internal heat generation(e.g., chemical reaction)
d.
Radiation
• Question 13
0 out of 3.3 points
In order to emit electromagnetic radiation, an object must be at a temperature:
Selected Answer: [None Given]
Answers: a.
Above 0 K
b.
Above that of its surroundings
c.
High enough for it to glow
d.
Above 0°C
• Question 14
0 out of 3.3 points
In convection heat transfer, what happens to the heat transfer coefficient if the
viscosity of the fluid decreases?
Selected Answer: [None Given]
Answers: a.
the heat transfer coefficient also increases
b.
the heat transfer coefficient will decrease
c.
the heat transfer coefficient partially increases then decreases
d.
the heat transfer coefficient will remain constant
• Question 15
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Boltzmann’z constant
b.
Joule’s constant
c.
Napier constant
d.
Maxwell’s constant
• Question 16
0 out of 3.3 points
In actual gases the molecular collisions are:
Selected Answer: [None Given]
Answers: a.
Elastic
b.
Inplastic
c.
Plastic
d.
Inelastic
• Question 17
0 out of 3.3 points
“The boiling point of a solution is a linear function of water at the same
pressure.” The above statement is called _________.
Selected Answer: [None Given]
Answers: a.
Fick’s rule
b.
Petit and Dulong’s law
c.
Reynolds law
d.
Dubring’s rule
• Question 18
0 out of 3.3 points
The maximum possible work that can be obtained a cycle operating between two reservoirs is
found from:
Selected Answer: a.
hot-wire anemometers
Answers: a.
hot-wire anemometers
b.
positive displacement meters
c.
turbine and proppeler meters
d.
magnetic flow meters
• Question 3
0 out of 3.3 points
Which is not correct for calculating air standard efficiency?
Selected Answer: a.
No account of the mechanism of heat transfer is considered
Answers: a.
No account of the mechanism of heat transfer is considered
b.
Gases dissociate at higher temperature
c.
Specific heat remains unchanged at all temperatures
d.
All processes are reversible
• Question 4
0 out of 3.3 points
What is the SI unit of force
Selected Answer: a.
dyne
Answers: a.
dyne
b.
pound
c.
newton
d.
kilogram
• Question 5
0 out of 3.3 points
During the fusion process, mass is lost and converted to energy according to:
Selected Answer: a.
The 2nd law of thermodynamics
Answers: a.
The 2nd law of thermodynamics
b.
The Heisenburg uncertainty principle
c.
The Compton’s law
d.
Einstein’s law
• Question 6
3.3 out of 3.3 points
The following properties are different for isomers of the same chemical compound
except
Selected Answer: a.
Number of atoms in a mole of each isomers
Answers: a.
Number of atoms in a mole of each isomers
b.
Specific heat
c.
Melting point
d.
Density
• Question 7
0 out of 3.3 points
In series pipe systems, all of the ff parameters vary from section to section
except
Selected Answer: [None Given]
Answers: a.
Pressure drop
b.
Mass flow
c.
Friction loss
d.
Head loss
• Question 8
0 out of 3.3 points
What usually happens when vapor condenses into liquid?
Selected Answer: [None Given]
Answers: a.
Its temperature difference increases
b.
It rejects heat
c.
It absorbs heat
d.
Its temperature difference decreases
• Question 9
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Red hot body
b.
Black body
c.
Gray body
d.
White body
• Question 10
0 out of 3.3 points
In heat exchanger design, one transfer unit implies:
Selected [None Given]
Answer:
Answers: a.
The section of heat exchanger which will cause temperature drop
of one degree centigrade
b.
Condition when the change in temperature of one steam is
numerically equal to the average driving force
c.
One fluid which is exchanging with another fluid of the same
chemical composition
d.
The section of heat exchanger where heat transfer surface area
has been one square meter
• Question 11
0 out of 3.3 points
Clog point of an oil refer to:
Selected [None Given]
Answer:
Answers: a.
the temperature at which paraffin ad waxes in oil start
precipitating
b.
the point of maximum contamination of oil
c.
the level of impurities beyond which oil ceases to flow
d.
the temperature at which oil solidifies
• Question 12
0 out of 3.3 points
The changing of solid directly to vapor without passing through the liquid state is
called
Selected Answer: [None Given]
Answers: a.
condensation
b.
evaporation
c.
sublimation
d.
vaporization
• Question 13
0 out of 3.3 points
The centigrade scale was introduced by Anders Celsius in what year?
Selected Answer: [None Given]
Answers: a.
1730
b.
1740
c.
1720
d.
1542
• Question 14
0 out of 3.3 points
Dritus Boelter equation can be applied in case of fluids flowing in:
Selected Answer: [None Given]
Answers: a.
Transition region
b.
Any of the other choices
c.
Turbulent region
d.
Laminar region
• Question 15
0 out of 3.3 points
A fuel gas obtained by the destructive distillation of soft coal is called
Selected Answer: [None Given]
Answers: a.
Gas scrub
b.
Coal gas
c.
Water gas
d.
Alcogas
• Question 16
0 out of 3.3 points
During idling in compression ignition engine the air fuel ratio may be of the order
of:
Selected Answer: [None Given]
Answers: a.
30
b.
100
c.
150
d.
200
• Question 17
0 out of 3.3 points
The ff are examples of indirect (secondary) measurements to measure flow
rates using obstruction meters except:
Selected Answer: [None Given]
Answers: a.
Weight and mass scales
b.
Pitot static meters
c.
Direction-sensing probes
d.
Static pressure probes
• Question 18
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if the temperature is
extremely high?
Selected Answer: [None Given]
Answers: a.
Almost constant except for ferromagnetic materials
b.
Decreases except for ferrous metals
c.
Increases except for steel
d.
Approaches infinity
• Question 19
0 out of 3.3 points
Hydrocarbons with 16 to 26 carbon atoms are referred to as :
Selected Answer: [None Given]
Answers: a.
Lubricating oils
b.
Commercial fuels
c.
Light oils
d.
Heavy oils
• Question 20
0 out of 3.3 points
The device that is used for reducing the exhaust noise is called
Selected Answer: [None Given]
Answers: a.
Exhaust manifold
b.
None of the other choices
c.
Muffler
d.
Exhaust pipe
• Question 21
0 out of 3.3 points
Which of the following types of hydrocarbons have chemical formula of CnH2n-4?
Selected Answer: [None Given]
Answers: a.
Diolefins
b.
Asphaltics
c.
Paraffins
d.
Aromatics
• Question 22
0 out of 3.3 points
Form of energy associated with the kinetic energy of the random motion of large
number of molecules.
Selected Answer: [None Given]
Answers: a.
heat of fusion
b.
internal enegy
c.
kinetic energy
d.
heat
• Question 23
0 out of 3.3 points
Which of the following is the measure of the relative effectiveness of momentum
and energy transport by diffusion in the velocity and thermal boundary layer?
Selected Answer: [None Given]
Answers: a.
Dimensional measurement
b.
Nusselt’s number
c.
Reynold’s number
d.
Prandtl number
• Question 24
0 out of 3.3 points
In the flow process, neglecting kinetic and potential energies, the integral of Vdp
represent what?
Selected Answer: [None Given]
Answers: a.
enthalpy change
b.
heat transfer
c.
flow energy
d.
Shaft work
• Question 25
0 out of 3.3 points
A hot block is cooled by blowing cool air over its top surface. The heat that is
first transferred to the air layer close to the block is by conduction. It is
eventually carried away from the surface by ______.
Selected Answer: [None Given]
Answers: a.
Radiation
b.
Conduction
c.
Thermal radiation
d.
Convection
• Question 26
0 out of 3.3 points
Which of the following is the color of iron when it its heated to a highest
temperature?
Selected Answer: [None Given]
Answers: a.
White
b.
yellow
c.
Orange
d.
Red
• Question 27
0 out of 3.3 points
A heat engine is supplied heat at rate of 30,000J/s gives an output of 9kW. The
thermal efficiency of the engine is:
Selected Answer: [None Given]
Answers: a.
30%
b.
43%
c.
50%
d.
55%
• Question 28
0 out of 3.3 points
The temperature at which its vapor pressure is equal to the pressure exerted on
the liquid
Selected Answer: [None Given]
Answers: a.
thermal point
b.
absolute humidity
c.
calorimetry
d.
boiling point
• Question 29
0 out of 3.3 points
The intake pipe to a hydraulic turbine from a dam is:
Selected Answer: [None Given]
Answers: a.
Surge tank
b.
Penstock
c.
Tailrace
d.
Spiral casing
• Question 30
0 out of 3.3 points
Which of the following statement about Van der Waals equation is correct?
Selected Answer: [None Given]
Answers: a.
The equation is valid for diatomic gases only.
b.
It has three roots of identical value at the critical point
c.
It represents a straight line on PV versus V plot
d.
It is valid for all pressures and temperatures
• Question 1
0 out of 3.3 points
Isentropic flow is
Selected Answer: a.
Perfect gas flow
Answers: a.
Perfect gas flow
b.
Reversible adiabatic flow
c.
Irreversible adiabatic flow
d.
Ideal fluid flow
• Question 2
0 out of 3.3 points
What is the value of the work done for a closed, reversible, isometric system?
Selected Answer: a.
negative
Answers: a.
negative
b.
indeterminate
c.
zero
d.
positive
• Question 3
3.3 out of 3.3 points
The heat transfer by convection occurs in which of the following?
Selected Answer: a.
Only in gases and liquids
Answers: a.
Only in gases and liquids
b.
Only in gases
c.
Only in gases and solids
d.
Only in liquids
• Question 4
0 out of 3.3 points
The themodynamic cycle used in a thermal power plant is
Selected Answer: a.
Bryton
Answers: a.
Bryton
b.
Rankine
c.
Ericson
d.
Joule
• Question 5
3.3 out of 3.3 points
Average pressure on a surface when a changing pressure condition exist
Selected Answer: a.
mean effective pressure
Answers: a.
mean effective pressure
b.
partial pressure
c.
back pressure
d.
pressure drop
• Question 6
0 out of 3.3 points
What is the use of a hydraulic jump?
Selected Answer: a.
Reduce the flow rate
Answers: a.
Reduce the flow rate
b.
Reduce the energy of flow
c.
Reduce the velocity of flow
d.
Increase the flow rate
• Question 7
0 out of 3.3 points
Solubility of a gas in a liquid at small concentration can be represented by which
law?
Selected Answer: [None Given]
Answers: a.
Henry’s law
b.
Clausius-Clapeyron’s equation
c.
Dalton’s law
d.
Raoult’s law
• Question 8
0 out of 3.3 points
The instrument that is used to check the state of charge of battery is called
Selected Answer: [None Given]
Answers: a.
Anemometer
b.
Battery eliminator
c.
Hydrometer
d.
Battery charger
• Question 9
0 out of 3.3 points
Exhaust gas leakage into the cooling system is most likely occur because of
defective:
Selected Answer: [None Given]
Answers: a.
Any of the other choices
b.
Manifold gasket
c.
Cylinder head gasket
d.
Water pump
• Question 10
0 out of 3.3 points
The general chemical formula for all hydrocarbons is CnHm. In different
combination of interest, as internal combustion engine fuel, n varies from:
Selected Answer: [None Given]
Answers: a.
1 to 26
b.
2 to 26
c.
1 to 54
d.
2 to 54
• Question 11
0 out of 3.3 points
A system that is completely impervious to its surrounding or neither mass nor
energy cross its boundaries
Selected Answer: [None Given]
Answers: a.
Closed system
b.
Open system
c.
isolated system
d.
non flow system
• Question 12
0 out of 3.3 points
In a two-phase system, 30% moisture means
Selected Answer: [None Given]
Answers: a.
70% vapor and 30% liquid
b.
70% liquid and 30% vapor
c.
30% vapor and 100% liquid
d.
30% liquid and 100% vapor
• Question 13
0 out of 3.3 points
Which of the following is not a heat exchanger?
Selected Answer: [None Given]
Answers: a.
Condenser
b.
Evaporators
c.
Water hammer
d.
Boilers
• Question 14
0 out of 3.3 points
Which of the following is a petroleum fuel?
Selected Answer: [None Given]
Answers: a.
Benzol
b.
Methyl alcohol
c.
Ethyl alcohol
d.
Naptha
• Question 15
0 out of 3.3 points
Which of the following is the instrument used to measure fluid velocity?
Selected Answer: [None Given]
Answers: a.
Pitot tube
b.
Viscosimeter
c.
Orsat apparatus
d.
Anemometer
• Question 16
0 out of 3.3 points
The diesel fuel pump is designed to supply fuel
Selected Answer: [None Given]
Answers: a.
In excess quantity than needed by the injection pump
b.
A constant quantity at all engine speeds
c.
Insufficient quantity in accordance with the engine speed
d.
Just sufficient against the demand of the injection pump
• Question 17
0 out of 3.3 points
The coefficient of contraction is the ratio of the :
Selected Answer: [None Given]
Answers: a.
Actual discharge to the theoretical discharge
b.
Actual velocity to the theoretical velocity
c.
Area of vena contracta to the orifice area
d.
Effective head to the actual head
• Question 18
0 out of 3.3 points
By supercharging:
Selected Answer: [None Given]
Answers: a.
Power stroke becomes stronger
b.
Engine can be made to run smoother
c.
Thermal efficiency of the engine can be improved
d.
Loss in exhaust gets reduced
• Question 19
0 out of 3.3 points
The extension and compression of helical spring is an example of what process?
Selected Answer: [None Given]
Answers: a.
Thermodynamic process
b.
Isothermal process
c.
Reversible process
d.
Adiabatic process
• Question 20
0 out of 3.3 points
For fluid flow, the enthalpy is the sum of internal energy and:
Selected Answer: [None Given]
Answers: a.
Work flow
b.
Entropy
c.
Pressure
d.
Temperature
• Question 21
0 out of 3.3 points
All of the following are properties of an ideal gas except:
Selected Answer: [None Given]
Answers: a.
Density
b.
Viscosity
c.
Temperature
d.
Pressure
• Question 22
0 out of 3.3 points
As a rule before the piston are removed, it is essential to remove the :
Selected Answer: [None Given]
Answers: a.
Piston rings
b.
Circlip
c.
Crankshaft
d.
Gudgeon pin
• Question 23
0 out of 3.3 points
Gauge pressure and absolute pressure differ from each other by:
Selected Answer: [None Given]
Answers: a.
Atmospheric pressure
b.
The system units
c.
Nothing they mean the same thing
d.
The size of the gauge
• Question 24
0 out of 3.3 points
In the polytropic process, PV=constant, if the value of n is infinitely large, the
process is
Selected Answer: [None Given]
Answers: a.
polytropic
b.
Isobaric
c.
isometric
d.
isothermal
• Question 25
0 out of 3.3 points
The temperature at which its vapor pressure is equal to the pressure exerted on
the liquid
Selected Answer: [None Given]
Answers: a.
absolute humidity
b.
boiling point
c.
thermal point
d.
calorimetry
• Question 26
0 out of 3.3 points
All of the following are characteristics of metals except:
Selected Answer: [None Given]
Answers: a.
High melting points
b.
Tendency to form positive ions
c.
High electrical conductivities
d.
Tendency to form brittle solids
• Question 27
0 out of 3.3 points
All of the following are forms of drag on a body moving through a fluid except:
Selected Answer: [None Given]
Answers: a.
Skin friction
b.
Wake drag
c.
Profile drag
d.
D’alembert’s paradox drag
• Question 28
0 out of 3.3 points
What do you call theoretical body where absorptivity and emissivity are
independent of the wavelength over the spectral region of the irradiation and the
surface emission?
Selected Answer: [None Given]
Answers: a.
transparent body
b.
opaque body
c.
black body
d.
white body
• Question 29
0 out of 3.3 points
Heat normally flowing from a high temperature body to a low temperature body
wherein it is impossible to convert heat without other effect
Selected Answer: [None Given]
Answers: a.
first law of thermodynamics
b.
third law of thermodynamics
c.
second law of thermodynamics
d.
zeroth law of thermodynamics
• Question 30
0 out of 3.3 points
In fluid, linear momentum is:
Selected [None Given]
Answer:
Answers: a.
A vector quantity equal to the product of mass and velocity
b.
A scalar quantity equal to the product of mass and velocity
c.
The change in impulse
d.
A scalar quantity equal to the product of force and length of time
applied
• Question 1
0 out of 3.3 points
In fluid, linear momentum is:
Selected a.
Answer: The change in impulse
Answers: a.
The change in impulse
b.
A scalar quantity equal to the product of mass and velocity
c.
A scalar quantity equal to the product of force and length of time
applied
d.
A vector quantity equal to the product of mass and velocity
• Question 2
0 out of 3.3 points
The fuel is injected into the cylinder in diesel engine when the piston is:
Selected Answer: a.
Approaching B.D.C during exhaust stroke
Answers: a.
Approaching B.D.C during exhaust stroke
b.
Approaching T.D.C during compression stroke
c.
Exactky at T.D.C before compression stroke
d.
Exactly at B.D.C after compression stroke
• Question 3
0 out of 3.3 points
An impulse turbine are used for:
Selected Answer: b.
Low head
Answers: a.
Medium head
b.
Low head
c.
High head
d.
Very low head
• Question 4
3.3 out of 3.3 points
The device that measures the temperature by the electromotive force.
Selected Answer: a.
thermocouple
Answers: a.
thermocouple
b.
thermoseebeck
c.
thermometer
d.
electro-thermometer
• Question 5
0 out of 3.3 points
The Fahrenheit scale was introduced by Gabriel Fahrenheit of Amsterdam, Holland
in what year?
Selected Answer: a.
1730
Answers: a.
1730
b.
1720
c.
1742
d.
1592
• Question 6
0 out of 3.3 points
Which of the following is the reason for insulating the pipes.
Selected Answer: a.
There is minimum corrosion
Answers: a.
There is minimum corrosion
b.
Capacity to withstand the pressure
c.
Heat ,loss the heat surface is minimized
d.
They may not break under pressure
• Question 7
0 out of 3.3 points
The combination of conditions that best describes a thermodynamic process is
given by which of the following?
I. Has successive states through which the system passes
II. When reversed leaves no change in the system
III. When reversed leaves no change in the system or the surroundings
IV. States are passes through so quickly that the surroundings do not
change
Selected Answer: a.
I & II
Answers: a.
I & II
b.
I only
c.
I &IV
d.
I & III
• Question 8
0 out of 3.3 points
It refers to the ratio of the internal thermal resistance of a solid to the boundary
layer thermal resistance( or external resistance to the body)
Selected Answer: [None Given]
Answers: a.
Reynolds number
b.
Nusselt number
c.
Prandtl number
d.
Biot number
• Question 9
0 out of 3.3 points
Which of the following statements about entropy is false
Selected [None Given]
Answer:
Answers: a.
entropy of a crystal at 0 F is zero
b.
an irreversible process increases entropy of the universe
c.
entropy of a mixture is greater than that of its components under
the same condition
d.
net entropy change in any closed cycle is zero
• Question 10
0 out of 3.3 points
In an Otto engine, the heat is added during
Selected Answer: [None Given]
Answers: a.
Isothermal process
b.
Isentropic process
c.
Isometric process
d.
Isobaric process
• Question 11
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are negligible or
insignificant, the work input to an adiabatic compressor is___________.
Selected Answer: [None Given]
Answers: a.
Negligible
b.
Zero
c.
Equal to change in enthalpy
d.
Infinity
• Question 12
0 out of 3.3 points
Total sulfur content in a diesel fuel oil must not exceed
Selected Answer: [None Given]
Answers: a.
0.1%
b.
0.5%
c.
0.15%
d.
0.2%
• Question 13
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Red hot body
b.
Black body
c.
White body
d.
Gray body
• Question 14
0 out of 3.3 points
In convection heat transfer, what happens to the heat transfer coefficient if the
viscosity of the fluid decreases?
Selected Answer: [None Given]
Answers: a.
the heat transfer coefficient also increases
b.
the heat transfer coefficient will decrease
c.
the heat transfer coefficient will remain constant
d.
the heat transfer coefficient partially increases then decreases
• Question 15
0 out of 3.3 points
Which of the following gives polytropic under n?
Selected Answer: [None Given]
Answers: a.
log (P1/P2) / log (V1/V2)
b.
log (P2/P1) / log (V1/V2)
c.
log (V1/V2) / log (P1/P2)
d.
log (V1/V2) / log (P2/P1)
• Question 16
0 out of 3.3 points
The stagnation of state is called the isentropic stagnation state when the
stagnation process is:
Selected Answer: [None Given]
Answers: a.
reversible as well as adiabatic
b.
adiabatic
c.
reversible as well dynamic
d.
isotropic
• Question 17
0 out of 3.3 points
It refers to the ratio of the rate of the heat transferred by conduction to the rate
of the energy stored.
Selected Answer: [None Given]
Answers: a.
Reynolds number
b.
Fourier number
c.
Prandtl number
d.
Biot number
• Question 18
0 out of 3.3 points
The state of a thermodynamic system is always defined by its:
Selected Answer: [None Given]
Answers: a.
temperature and pressure
b.
process
c.
absolute temperature
d.
properties
• Question 19
0 out of 3.3 points
The number of protons in the nucleus of an atom or the number of electrons in the
orbit of an atom
Selected Answer: [None Given]
Answers: a.
atomic number
b.
atomic mass
c.
atomic weight
d.
atomic volume
• Question 20
0 out of 3.3 points
Convection is described of which of the following law:
Selected Answer: [None Given]
Answers: a.
The Stefan – Boltzmann law
b.
Fourier’s Law
c.
Newton’s Law
d.
The logarithmic mean temperature difference
• Question 21
0 out of 3.3 points
The transmission of heat from one place to another by fluid circulation between
the spots of different temperatures is called ______.
Selected Answer: [None Given]
Answers: a.
Convection
b.
Radiation
c.
Conservation
d.
Conduction
• Question 22
0 out of 3.3 points
A liquid boils when its vapor pressure equals.
Selected Answer: [None Given]
Answers: a.
the ambient pressure
b.
the critical pressure
c.
one standard atmosphere
d.
the gage pressure
• Question 23
0 out of 3.3 points
When fuel oil has a high viscosity then the fuel oil
Selected Answer: [None Given]
Answers: a.
Will evaporate easily
b.
Will flow slowly through pipes
c.
Will burn without smoke
d.
Will have a low specific gravity
• Question 24
0 out of 3.3 points
“It is impossible to construct a heat engine that operates in a cycle and receives a
given quantity of heat from a high temperature body and does an equal amount of
work”. The above statement is known as:
Selected Answer: [None Given]
Answers: a.
Kinetic theory
b.
Gay Lussac’s law
c.
Kelvin-Planck’s law
d.
Joule-Thompson’s law
• Question 25
0 out of 3.3 points
A gas produced by the combustion of fuel oil and cannot be found in the flue gases
is:
Selected Answer: [None Given]
Answers: a.
Oxygen
b.
Carbon dioxide
c.
Nitrogen
d.
Hydrogen
• Question 26
0 out of 3.3 points
Which of the following statements is based on prevost theory of heat
exchanger?
Selected [None Given]
Answer:
Answers: a.
heat transfer in most of the cases occurs by combination of
conduction, convection and radiation
b.
all bodies above absolute zero emit radiation
c.
the substance moves because of the application of the mechanical
power such as that of a fan
d.
the substance moves because of the decrease in
its density which is caused by increase in temperature
• Question 27
0 out of 3.3 points
The temperature at which lubricating will form a cloud.
Selected Answer: [None Given]
Answers: a.
Critical point
b.
Cloud point
c.
Boiling point
d.
Pour point
• Question 28
0 out of 3.3 points
A theoretical body which when heated to incandescence would emit a
continuous light-ray spectrum.
Selected Answer: [None Given]
Answers: a.
Black body radiation
b.
Blue body
c.
Black body
d.
White body
• Question 29
0 out of 3.3 points
What is the use of a hydraulic jump?
Selected Answer: [None Given]
Answers: a.
Reduce the velocity of flow
b.
Reduce the flow rate
c.
Reduce the energy of flow
d.
Increase the flow rate
• Question 30
0 out of 3.3 points
The work done by a force of R Newtons moving in a distance of L meters is
converted entirely into kinetic energy and expressed by the equation:
Selected Answer: [None Given]
Answers: a.
RL = 1/2 MV2
b.
RL = 2MV2
c.
RL = 2MV
d.
RL = 1/2 MV
• Question 1
0 out of 3.3 points
Both Stirling and Ericson engine are
Selected Answer: a.
Brayton engines
Answers: a.
Brayton engines
b.
Carnot engines
c.
Internal combustion engines
d.
External combustion engines
• Question 2
0 out of 3.3 points
Air standard efficiency of a diesel engine depends on:
Selected Answer: a.
Speed
Answers: a.
Speed
b.
Torque
c.
Fuel
d.
Compression ratio
• Question 3
0 out of 3.3 points
Power may be expressed in units of
Selected Answer: a.
ft-lb
Answers: a.
ft-lb
b.
btu
c.
btu/hr
d.
kw-hr
• Question 4
0 out of 3.3 points
The term “exposure” in radiological effects is used as a measure of a gamma
ray or an X-ray field in the surface of an exposed object. Since this radiation
produces ionization of the air surrounding the object, the exposure is obtained
as:
Selected a.
Answer: Mass of air x surface area of an exposed object
Answers: a.
Mass of air x surface area of an exposed object
b.
Number of ions produced per mass of air x coulombs per
kilogram
c.
Mass of air over surface area of an exposed object
d.
Number of ions produced per mass of air + coulombs per
kilogram
• Question 5
0 out of 3.3 points
A Francis turbine has what flow?
Selected Answer: a.
Outward flow impulse
Answers: a.
Outward flow impulse
b.
Outward flow reaction
c.
Inward flow reaction
d.
Inward flow impulse
• Question 6
0 out of 3.3 points
Stoichiometric ratio is
Selected Answer: a.
Theoretical mixture of air for complete combustion
Answers: a.
Theoretical mixture of air for complete combustion
b.
Actual ratio of air to fuel for maximum efficiency
c.
Chemically correct air-fuel ratio by volume
d.
Chemically correct air- fuel ratio by weight
• Question 7
0 out of 3.3 points
The ff are examples of indirect (secondary) measurements to measure flow
rates using obstruction meters except:
Selected Answer: [None Given]
Answers: a.
Weight and mass scales
b.
Static pressure probes
c.
Direction-sensing probes
d.
Pitot static meters
• Question 8
0 out of 3.3 points
A theoretical gas which strictly follows boyle’s law and Charles law of gasses.
Selected Answer: [None Given]
Answers: a.
perfect gas
b.
universal gas
c.
imperfect gas
d.
combined gas
• Question 9
0 out of 3.3 points
The firing order in case of four cylinder in engines is generally
Selected Answer: [None Given]
Answers: a.
1-4-3-2
b.
1-3-4-2
c.
1-2-4-3
d.
Either 1-3-4-2 or 1-4-3-2
• Question 10
0 out of 3.3 points
Exhaust gas leakage into the cooling system is most likely occur because of
defective:
Selected Answer: [None Given]
Answers: a.
Cylinder head gasket
b.
Manifold gasket
c.
Any of the other choices
d.
Water pump
• Question 11
0 out of 3.3 points
What do you call theoretical body where absorptivity and emissivity are
independent of the wavelength over the spectral region of the irradiation and the
surface emission?
Selected Answer: [None Given]
Answers: a.
opaque body
b.
transparent body
c.
black body
d.
white body
• Question 12
0 out of 3.3 points
A stirling cycle has
Selected Answer: [None Given]
Answers: a.
Two isothermal and two constant pressure processes
b.
Two adiabatic and two constant pressure processes
c.
Two isothermal and two constant volume processes
d.
Two adiabatic and two constant volume process
• Question 13
0 out of 3.3 points
Which of the following is the S.I. unit of thermal conductivity?
Selected Answer: [None Given]
Answers: a.
KJ/m-hr-C
b.
W/m-hr –C
c.
W/m-hr-K
d.
W/m K
• Question 14
0 out of 3.3 points
The ff are all examples of indirect (secondary) miscellaneous methods to measure flow except:
d.
Supersonic aircraft
• Question 12
0 out of 3.3 points
A correction of LMTD is essential in case of:
Selected Answer: [None Given]
Answers: a.
Parallel flow hear exchanger
b.
None of the other choices
c.
Cross flow heat exchanger
d.
Counter current heat exchanger
• Question 13
0 out of 3.3 points
Least value of Prandt’l number can be expected in case of ____________.
Selected Answer: [None Given]
Answers: a.
Salt solution
b.
Sugar solution
c.
Water
d.
Liquid metals
• Question 14
0 out of 3.3 points
Is the condition of pressure and temperature at which a liquid and its vapor are
indistinguishable.
Selected Answer: [None Given]
Answers: a.
Critical point
b.
absolute humidity
c.
relative humidity
d.
dew point
• Question 15
0 out of 3.3 points
What is the apparatus used in the analysis of combustible gases?
Selected Answer: [None Given]
Answers: a.
Calorimetry
b.
Calorimeter gas
c.
Calorimeter differential
d.
Calorimeter
• Question 16
0 out of 3.3 points
The process of separating two or more liquids means of the difference in their
boiling point.
Selected Answer: [None Given]
Answers: a.
Gas scrubbing
b.
Engler distillation
c.
Fractional crystallization
d.
Fractional distillation
• Question 17
0 out of 3.3 points
At what particular condition that no more heat can that be removed from a
substance and the temperature can no longer be lowered?
Selected Answer: [None Given]
Answers: a.
Ground zero
b.
Freezing point
c.
Absolute zero
d.
Critical point
• Question 18
0 out of 3.3 points
Which of the following is not an advantage of a superheated, closed rankine cycle
over an open rankine cycle?
Selected Answer: [None Given]
Answers: a.
lower equipment cost
b.
increased efficiency
c.
increased bolier life
d.
increased turbine life
• Question 19
0 out of 3.3 points
When a certain mass of fluid in particular state passes through a series of process
and returns to its initial state, it undergoes a:
Selected Answer: [None Given]
Answers: a.
cycle
b.
process
c.
rotation
d.
revolution
• Question 20
0 out of 3.3 points
What is the equation for the work done by a constant temperature system?
Selected Answer: [None Given]
Answers: a.
W = mR(T2-T1) ln(V2/V1)
b.
W = mRT ln(V2-V1)
c.
W = MRT ln(V2/V1)
d.
W = RT ln (V2/V1)
• Question 21
0 out of 3.3 points
The products of complete combustion of gaseous hydrocarbons
Selected Answer: [None Given]
Answers: a.
Water, carbon monoxide and carbon dioxide
b.
Carbon monoxide
c.
Carbon monoxide, water and ammonia
d.
Carbon dioxide and water
• Question 22
0 out of 3.3 points
What is the area under the curve of a pressure volume diagram?
Selected Answer: [None Given]
Answers: a.
Heat
b.
Power
c.
Steady flow work
d.
Non flow work
• Question 23
0 out of 3.3 points
Number of molecules in a mole of any substance is a constant called
Selected Answer: [None Given]
Answers: a.
otto constant
b.
Thompson constant
c.
avogadro’s number
d.
rankine constant
• Question 24
0 out of 3.3 points
The ideal cycle based on the concept that the combustion process is both diesel and
gasoline in the combination of heat transfer processes that is constant pressure
and constant volume.
Selected Answer: [None Given]
Answers: a.
Ericsson cycle
b.
Rankine cycle
c.
Brayton cycle
d.
Dual cycle
• Question 25
0 out of 3.3 points
What is the first law of thermodynamics?
Selected Answer: [None Given]
Answers: a.
energy can neither be created nor destroyed
b.
entropy of the universe is increased by irreversible processes
c.
heat energy cannot be completely transformed into work
d.
internal energy is due to molecular motions
• Question 26
0 out of 3.3 points
In an actual gases, the molecular collisions are
d.
Supersonic aircraft
• Question 21
0 out of 3.3 points
In an oxidation – reduction chemical reaction, all of the following occur except:
Selected Answer: [None Given]
Answers: a.
Elements becoming more negative
b.
The exchange of electrons between elements
c.
Nuclear fusion
d.
Elements becoming more positive
• Question 22
0 out of 3.3 points
When two or more light atoms have sufficient energy( available only at high
temperature velocities) to fuse together to form a heavier nucleus the process
called
Selected Answer: [None Given]
Answers: a.
The Compton effect
b.
The photoelectric effect
c.
Fission
d.
Fusion
• Question 23
0 out of 3.3 points
All of the following are characteristics of metals except:
Selected Answer: [None Given]
Answers: a.
Tendency to form brittle solids
b.
High electrical conductivities
c.
High melting points
d.
Tendency to form positive ions
• Question 24
0 out of 3.3 points
A pneumatic tool is generally powered by
Selected Answer: [None Given]
Answers: a.
Air
b.
Steam
c.
Electricity
d.
Water
• Question 25
0 out of 3.3 points
Which of the following statements is not true for real gases?
Selected [None Given]
Answer:
Answers: a.
Real gases are subjected to attractive forces between molecules
(e.g. Van der Waal’s forces)
b.
Real gases are found only rarely in nature
c.
The law of corresponding states may be used for real gases
d.
Molecules occupy a volume not negligible in comparison to the
total volume of gas
• Question 26
0 out of 3.3 points
Acceleration is proportional to force.
Selected Answer: [None Given]
Answers: a.
Theory of relativity
b.
Newton’s law
c.
Archimedes principle
d.
Law of gravitation
• Question 27
0 out of 3.3 points
Which of the following relations is not applicable in a free expansion process?
Selected Answer: [None Given]
Answers: a.
Change in temperature is zero
b.
Work done is zero
c.
Heat rejected is zero
d.
Heat supplied is zero
• Question 28
0 out of 3.3 points
Equation of state for a single component can be any of the following except:
Selected [None Given]
Answer:
Answers: a.
relationship mathematically interrelating thermodynamics
properties of the material
b.
a mathematical expression defining a path between states
c.
the ideal gas law
d.
any relationship interrelating 3 or more state functions
• Question 29
0 out of 3.3 points
What device is used to measure the amount of infrared radiation in each portion
of a person’s skin that is emitted?
Selected Answer: [None Given]
Answers: a.
Pyrometer
b.
Potentiometer
c.
Thermograph
d.
Thermometer
• Question 30
0 out of 3.3 points
In the polytropic process we have pvn = constant, if the value of n is infinitely large,
the process is called
Selected Answer: [None Given]
Answers: a.
Constant pressure process
b.
Constant temperature process
c.
Constant volume process
d.
Adiabatic process
• Question 1
0 out of 3.3 points
What devices combines air and fuel for burning in cylinder?
Selected Answer: a.
Fuel injection
Answers: a.
Fuel injection
b.
Regenerator
c.
Carburetor
d.
Intercooler
• Question 2
0 out of 3.3 points
The temperature measurement in an ordinary thermometer which has constant
specific humidity:
Selected Answer: a.
Critical temperature
Answers: a.
Critical temperature
b.
Wet bulb temperature
c.
Dew point temperature
• Question 3
0 out of 3.3 points
Which of the following is the driving force in heat transfer?
Selected Answer: a.
thickness gradient
Answers: a.
thickness gradient
b.
dielectric gradient
c.
viscosity gradient
d.
temperature gradient
• Question 4
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if the temperature is
extremely high?
Selected Answer: a.
Decreases except for ferrous metals
Answers: a.
Decreases except for ferrous metals
b.
Approaches infinity
c.
Increases except for steel
d.
Almost constant except for ferromagnetic materials
• Question 5
0 out of 3.3 points
The ff are examples of indirect (secondary) measurements to measure flow
rates using obstruction meters except:
Selected Answer: a.
Static pressure probes
Answers: a.
Static pressure probes
b.
Weight and mass scales
c.
Pitot static meters
d.
Direction-sensing probes
• Question 6
0 out of 3.3 points
Venturi meters, pitot static gauges, orifice meters, flow nozzles, and differential
manometers all depend upon the relationship between:
Selected Answer: a.
Pressure and mass flow
Answers: a.
Pressure and mass flow
b.
Flow velocity and friction
c.
Flow velocity and pressure
d.
Friction and pressure
• Question 7
0 out of 3.3 points
What is the pressure above zero?
Selected Answer: a.
Absolute pressure
Answers: a.
Absolute pressure
b.
Gage pressure
c.
Vacuum pressure
d.
Atmospheric pressure
• Question 8
0 out of 3.3 points
What is the pressure at the exit of a draft tube in turbine?
Selected Answer: [None Given]
Answers: a.
Atmospheric
b.
Vacuum
c.
Below atmospheric
d.
Above atmospheric
• Question 9
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Pelton
b.
Parson
c.
Bankl
d.
Hero
• Question 10
0 out of 3.3 points
What is the chemical formula of an aromatic type of hydrocarbon fuels?
Selected Answer: [None Given]
Answers: a.
CnH2n-2
b.
CnH2n+2
c.
CnH2n
d.
CnH2n-6
• Question 11
0 out of 3.3 points
In convection heat transfer, what happens to the heat transfer coefficient if the
viscosity of the fluid increases?
Selected Answer: [None Given]
Answers: a.
the heat transfer coefficient will decrease
b.
none of the other choices
c.
the heat transfer coefficient remains constant
d.
the heat transfer coefficient will increase
• Question 12
0 out of 3.3 points
What is the process that has no heat transfer?
Selected Answer: [None Given]
Answers: a.
reversible isometric
b.
polytropic
c.
adiabatic
d.
isothermal
• Question 13
0 out of 3.3 points
Which of the following needs to be filtered in a diesel engine?
Selected Answer: [None Given]
Answers: a.
Lubricating oil only
b.
Air only
c.
Air and diesel oil only
d.
Air, diesel oil and lubricating oil
• Question 14
0 out of 3.3 points
Which of the following is a unit of thermal diffusivity?
Selected Answer: [None Given]
Answers: a.
M2/hr °C
b.
Kcal/m2hr °C
c.
M2/hr
d.
Kcal/m2hr
• Question 15
0 out of 3.3 points
What is the force which tends to draw a body toward the center about which it is
rotating?
Selected Answer: [None Given]
Answers: a.
centrifugal advance
b.
centripetal force
c.
centrifugal force
d.
centrifugal in motion
• Question 16
0 out of 3.3 points
Which of the following is the measure of the relative effectiveness of momentum
and energy transport by diffusion in the velocity and thermal boundary layer?
Selected Answer: [None Given]
Answers: a.
Prandtl number
b.
Reynold’s number
c.
Nusselt’s number
d.
Dimensional measurement
• Question 17
0 out of 3.3 points
All of the following are properties of an ideal gas except:
Selected Answer: [None Given]
Answers: a.
Viscosity
b.
Temperature
c.
Pressure
d.
Density
• Question 18
0 out of 3.3 points
A device for measuring the velocity of wind
Selected Answer: [None Given]
Answers: a.
anemoscope
b.
aneroid barometer
c.
anemometer
d.
anemograph
• Question 19
0 out of 3.3 points
Atomic weights of the elements in the periodic table are not whole numbers
because of:
Selected [None Given]
Answer:
Answers: a.
Imprecise measurements during the development of the periodic
table
b.
The exchange of reference of the atomic mass unit from oxygen- 16
to carbon -12 in 1961
c.
Round- off error in calculating atomic weights
d.
The existence of isotopes
• Question 20
0 out of 3.3 points
Which of the following property of liquid extend resistance to angular or shear
deformation:
Selected Answer: [None Given]
Answers: a.
Density
b.
Viscosity
c.
Specific gravity
d.
Specific weight
• Question 21
0 out of 3.3 points
What do you call the weight of the column of air above the earth’s surface?
Selected Answer: [None Given]
Answers: a.
Atmospheric pressure
b.
Air pressure
c.
Aerostatic pressure
d.
Wind pressure
• Question 22
0 out of 3.3 points
Assuming real processes, the net entropy change in the universe:
Selected Answer: [None Given]
Answers: a.
is negative
b.
is positive
c.
must be calculated
d.
equals zero
• Question 23
0 out of 3.3 points
The transmission of heat from one place to another by fluid circulation between
the spots of different temperatures is called ______.
Selected Answer: [None Given]
Answers: a.
Radiation
b.
Conduction
c.
Convection
d.
Conservation
• Question 24
0 out of 3.3 points
Measure the diffuser’s ability to increase the pressure of the fluid is:
Selected Answer: [None Given]
Answers: a.
Speed recovery factor
b.
Pressure recovery factor
c.
Volume recovery factor
d.
Diffuser recovery factor
• Question 25
0 out of 3.3 points
A substance that is homogeneous in composition and homogeneous and invariable
in chemical aggregation
Selected Answer: [None Given]
Answers: a.
simple substance
b.
pure substance
c.
water
d.
vapor
• Question 26
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
compound pressure
b.
variable pressure
c.
complex pressure
d.
positive and negative pressure
• Question 27
0 out of 3.3 points
The true pressure measured above a perfect vacuum is:
Selected Answer: [None Given]
Answers: a.
Vacuum pressure
b.
Gauge pressure
c.
Atmospheric pressure
d.
Absolute pressure
• Question 28
0 out of 3.3 points
What do you call the changing of an atom of element into an atom of a different
element with a different atomic mass?
Selected Answer: [None Given]
Answers: a.
Atomic pile
b.
Atomization
c.
Atomic energy
d.
Atomic transmutation
• Question 29
0 out of 3.3 points
What is the series of process that eventually bring the system back to its original
condition
Selected Answer: [None Given]
Answers: a.
Irreversible process
b.
Cycle
c.
Isentropic process
d.
Reversible process
• Question 30
0 out of 3.3 points
The pressure obtained from barometric pressure reading.
Selected Answer: [None Given]
Answers: a.
absolute pressure
b.
gage pressure
c.
atmospheric pressure
d.
vacuum pressure
• Question 1
0 out of 3.3 points
When 1 mol carbon combines with 1 mol oxygen
Selected Answer: a.
1 mol carbon dioxide
Answers: a.
1 mol carbon dioxide
b.
1 mol carbon dioxide
c.
1 mole carbon and 1 mol carbon dioxide
d.
2 mols carbon dioxide
• Question 2
3.3 out of 3.3 points
If a substance temperature is less than its saturation temperature , the
substance is:
Selected Answer: a.
subcooled liquid
Answers: a.
subcooled liquid
b.
saturated vapor
c.
wet vapor
d.
superheated vapor
• Question 3
0 out of 3.3 points
The latent heat of vaporization on joules per kg is equal to
Selected Answer: a.
4.13 x 103
Answers: a.
4.13 x 103
b.
5.4 x 102
c.
22.6 x 105
d.
3.35 x 105
• Question 4
0 out of 3.3 points
The function of a turbine is to:
Selected Answer: a.
Transfer heat from one fluid to another
Answers: a.
Transfer heat from one fluid to another
b.
Exchange heat to increase energy to the flow
c.
Increase the total energy content of the flow
d.
Extract energy from the flow
• Question 5
0 out of 3.3 points
The natural direction of the heat flow between two reservoirs is dependent on
which of the following?
Selected Answer: a.
Their states, whether solid, liquid and gas
Answers: a.
Their states, whether solid, liquid and gas
b.
Their internal energy
c.
Their pressures
d.
Their temperature difference
• Question 6
0 out of 3.3 points
The coefficient of contraction is the ratio of the :
Selected Answer: a.
Actual velocity to the theoretical velocity
Answers: a.
Actual velocity to the theoretical velocity
b.
Area of vena contracta to the orifice area
c.
Effective head to the actual head
d.
Actual discharge to the theoretical discharge
• Question 7
0 out of 3.3 points
According to Prevost theory of heat exchange,
Selected a.
Answer: It is impossible to transfer heat from low temperature source to
high temperature source.
Answers: a.
It is impossible to transfer heat from low temperature source to
high temperature source.
b.
Heat transfer in most cases occurs by combination of conduction,
convection and radiation.
c.
Heat transfer by radiation needs no medium.
d.
All bodies above absolute zero emit radiation
• Question 8
0 out of 3.3 points
What are the immediate undesirable products from the petroleum based
lubricating oil when subjected to high pressure and temperature?
Selected Answer: a.
Carbon residue
Answers: a.
Carbon residue
b.
Gums, resins and acids
c.
Soots and ashes
d.
Sulfur
• Question 9
0 out of 3.3 points
Which is not a viscosity rating?
Selected Answer: [None Given]
Answers: a.
Entropy degrees API
b.
SSU
c.
Redwood
d.
Centipoises
• Question 10
0 out of 3.3 points
The function of a heat exchanger is to:
Selected [None Given]
Answer:
Answers: a.
Increase the total energy of the flow
b.
Transfer heat from one fluid to another
c.
Exchange heat to increase energy of the flow
d.
Increase the water temperature entering the boiler and decrease
combustion requirements
• Question 11
0 out of 3.3 points
Which of the following cycles consists two isothermal and two constant volume
processes?
Selected Answer: [None Given]
Answers: a.
otto cycle
b.
Stirling Cycle
c.
Diesel cycle
d.
Ericsson cycle
• Question 12
0 out of 3.3 points
Under ideal conditions, isothermal, isobaric, isochoric, and adiabatic process are;
Selected Answer: [None Given]
Answers: a.
Stable process
b.
Quasi – static process
c.
Dynamic process
d.
Static process
• Question 13
0 out of 3.3 points
A reservoir that supplies energy in the form of heat is called:
Selected Answer: [None Given]
Answers: a.
Source
b.
Cold reservoir
c.
Sink
d.
Heat reservoir
• Question 14
0 out of 3.3 points
The measure of the randomness of the molecules of a substance.
Selected Answer: [None Given]
Answers: a.
heat
b.
entropy
c.
internal energy
d.
enthalpy
• Question 15
0 out of 3.3 points
The Bureau of Standard uses, among others, liquid – vapor equilibrium of Nitrogen
at.
Selected Answer: [None Given]
Answers: a.
253°C
b.
-196°C
c.
-253°C
d.
196°C
• Question 16
0 out of 3.3 points
The lowest portion to storage basin from where the water is not drawn is:
Selected Answer: [None Given]
Answers: a.
Dead storage
b.
Bottom storage
c.
Spring reserve
d.
Sub-soil storage
• Question 17
0 out of 3.3 points
Thermal conductivity of wood depends on which of the following:
Selected Answer: [None Given]
Answers: a.
Density
b.
All of the other choices
c.
Moisture
d.
Temperature
• Question 18
0 out of 3.3 points
Which of the following is the science of low temperature?
Selected Answer: [None Given]
Answers: a.
ergonomics
b.
thermo-kinetics
c.
thermodynamics
d.
cryogenics
• Question 19
0 out of 3.3 points
How do you call of removing of impurities from a gas by bubbling it through a
liquid purifying agent?
Selected Answer: [None Given]
Answers: a.
Gas bubbling
b.
Gas scrubbing
c.
Gas liquefying
d.
Gas purifying
• Question 20
0 out of 3.3 points
The work done in an adiabatic process in a system:
Selected [None Given]
Answer:
Answers: a.
Is equal to the change in total energy of closed system plus
entropy change
b.
Is equal to the change in total energy in a closed system
c.
Is equal to the change in total energy of closed system plus net
heat transfer
d.
Is equal to the total net heat transfer plus the entropy change
• Question 21
0 out of 3.3 points
What usually happens when vapor condenses into liquid?
Selected Answer: [None Given]
Answers: a.
Its temperature difference increases
b.
Its temperature difference decreases
c.
It rejects heat
d.
It absorbs heat
• Question 22
0 out of 3.3 points
What is the chemical formula of an aromatic type of hydrocarbon fuels?
Selected Answer: [None Given]
Answers: a.
CnH2n+2
b.
CnH2n
c.
CnH2n-2
d.
CnH2n-6
• Question 23
0 out of 3.3 points
The total sulfur content in a diesel fuel must not exceed
Selected Answer: [None Given]
Answers: a.
0.5%
b.
0.8%
c.
011%
d.
0.3%
• Question 24
0 out of 3.3 points
In order to emit electromagnetic radiation, an object must be at a temperature:
Selected Answer: [None Given]
Answers: a.
Above 0 K
b.
Above 0°C
c.
High enough for it to glow
d.
Above that of its surroundings
• Question 25
0 out of 3.3 points
A water temperature of 18 F in the water cooled condenser is equivalent in C to
Selected Answer: [None Given]
Answers: a.
10
b.
-9.44
c.
7.78
d.
263.56
• Question 26
0 out of 3.3 points
The first and second laws of thermodynamics are:
Selected Answer: [None Given]
Answers: a.
Energy equations
b.
Equations of state
c.
Momentum equations
d.
Continuity equations
• Question 27
0 out of 3.3 points
What is the equation for the work done by a constant temperature system?
Selected Answer: [None Given]
Answers: a.
W = mRT ln(V2-V1)
b.
W = mR(T2-T1) ln(V2/V1)
c.
W = MRT ln(V2/V1)
d.
W = RT ln (V2/V1)
• Question 28
0 out of 3.3 points
The relationship between the total volume of a mixture of non-reacting gases
and their partial volume is given by:
Selected Answer: [None Given]
Answers: a.
mole fractions
b.
Amagat’s law
c.
Dalton’s law
d.
gravimetric fractions
• Question 29
0 out of 3.3 points
The two metals were kept together at room temperature and it was found out
that one is colder than the other. Which of the following is the best reason why
one metal is colder than the other?
Selected [None Given]
Answer:
Answers: a.
one metal is of higher temperature as compared to the other
b.
one metal is of lower temperature as compared to the other
c.
the heat transfer coefficient of one metal is of higher
d.
the thermal conductivity of one metal is as high as compared to
the other
• Question 30
0 out of 3.3 points
The reciprocal of density is?
Selected Answer: [None Given]
Answers: a.
Specific volume
b.
Specific gravity
c.
Specific heat
d.
Specific weight
• Question 1
3.3 out of 3.3 points
Which of the following reasons why one gram of steam at 100°C causes more
serious burn than 1 gram of water at 100°C?
Selected Answer: a.
Steam contains more internal energy
Answers: a.
Steam contains more internal energy
b.
Steam is everywhere thus it strikes greater force
c.
The steam has higher specific heat
d.
Steam is less dense than boiling water
• Question 2
3.3 out of 3.3 points
In a p-t diagram of a pure substance, the curve separating the solid phase from
liquid phase is:
Selected Answer: a.
fusion curve
Answers: a.
fusion curve
b.
boiling point
c.
vaporization curve
d.
sublimation point
• Question 3
0 out of 3.3 points
Each of the following is correct values of standard atmospheric pressure except:
Selected Answer: b.
760 torr
Answers: a.
1013 mmHg
b.
760 torr
c.
1,000 atm
d.
14.962 psia
• Question 4
0 out of 3.3 points
How do you classify a body that has an emissivity factor of 0.7?
Selected Answer: a.
Theoretical body
Answers: a.
Theoretical body
b.
Black body
c.
White body
d.
Gray body
• Question 5
3.3 out of 3.3 points
A decrease in stagnation pressure will decrease the mass flux through the:
Selected Answer: a.
Diverging nozzle
Answers: a.
Diverging nozzle
b.
Converging nozzle
c.
Converging- diverging nozzle
d.
None of these
• Question 6
0 out of 3.3 points
In a closed system (with a moving boundary) which of the following represents
work done during an isothermal process?
Selected Answer: a.
W = (P2V2 - P1V1) / (1 – n)
Answers: a.
W = (P2V2 - P1V1) / (1 – n)
b.
W=0
c.
W = P(V2 - V1)
d.
W = P1V1 ln (V2/V1)
• Question 7
3.3 out of 3.3 points
For an irreversible process, what is true about the change in entropy of the system
and surroundings
Selected Answer: a.
ds > 0
Answers: a.
ds > 0
b.
ds = 0
c.
ds = dq/dt
d.
ds < 0
• Question 8
0 out of 3.3 points
Work or energy can be function of all the following except
Selected Answer: [None Given]
Answers: a.
force and time
b.
force and time
c.
temperature and entropy
d.
power and time
• Question 9
0 out of 3.3 points
Cryogenic temperature ranges from:
Selected Answer: [None Given]
Answers: a.
-150F to -359F
b.
-100F to -300F
c.
-200F to -400F
d.
-250F to -459F
• Question 10
0 out of 3.3 points
The following are all commonly quoted values of standard temperatures and
pressures except:
Selected Answer: [None Given]
Answers: a.
0F and 29.92in Hg
b.
273.15K and 101.325 kPa
c.
32F and 14.696 psia
d.
0C and 760mm Hg
• Question 11
0 out of 3.3 points
Represents the temperature an ideal gas will attain when it is brought to rest
adiabatically:
Selected Answer: [None Given]
Answers: a.
Critical temperature
b.
Stagnation temperature
c.
Boiling temperature
d.
Absolute zero temperature
• Question 12
0 out of 3.3 points
The state of a thermodynamic system is always defined by its:
Selected Answer: [None Given]
Answers: a.
temperature and pressure
b.
absolute temperature
c.
process
d.
properties
• Question 13
0 out of 3.3 points
The unit used for expressing API gravity is:
Selected Answer: [None Given]
Answers: a.
Degrees
b.
Dimensionless numbers
c.
None of the other choices
d.
Gm/cc
• Question 14
0 out of 3.3 points
Power may be expressed in units of
Selected Answer: [None Given]
Answers: a.
kw-hr
b.
btu
c.
btu/hr
d.
ft-lb
• Question 15
0 out of 3.3 points
The mechanical efficiency of a device is the ratio of the
Selected [None Given]
Answer:
Answers: a.
Ideal energy input to the actual energy input
b.
Actual to the ideal energy input
c.
Mechanical energy input to the mechanical energy output of the
device
d.
Actual energy extracted to the ideal energy extracted
• Question 16
0 out of 3.3 points
Percent excess air is the difference between the air actually supplied and the
theoretical air divided by
Selected Answer: [None Given]
Answers: a.
The theoretically air supplied
b.
The deficiency air supplied
c.
The sufficient air supplied
d.
The actually air supplied
• Question 17
0 out of 3.3 points
Why are metals good conductors of heat?
Selected Answer: [None Given]
Answers: a.
Because they have reflecting surfaces
b.
Because they contain free electrons
c.
Because their atoms collide infrequently
d.
Because their atoms are relatively far apart
• Question 18
0 out of 3.3 points
The tendency of a pure compound to be composed of the same elements combined
in a definite proportion by mass
Selected Answer: [None Given]
Answers: a.
Boyle’s law
b.
The law of definite proportions
c.
Le chatelier’s principle
d.
Avogadro’s law
• Question 19
0 out of 3.3 points
Which of the following is used for fighter jets?
Selected Answer: [None Given]
Answers: a.
Turbopop
b.
Ramjet
c.
Pulsejet
d.
Turbojet
• Question 20
0 out of 3.3 points
The thermal resistance for one-dimensional steady conduction heat transfer
through cylindrical wall in the radial direction is expresses in which of the
following functions?
Selected Answer: [None Given]
Answers: a.
logarithmic
b.
linear
c.
trigonometric
d.
exponential
• Question 21
0 out of 3.3 points
In any non quasi – static thermodynamic process, the overall entropy of an isolated
system will
Selected Answer: [None Given]
Answers: a.
decrease only
b.
decrease and then increase
c.
increase and then decrease
d.
increase only
• Question 22
0 out of 3.3 points
The true pressure measured above a perfect vacuum is:
Selected Answer: [None Given]
Answers: a.
Atmospheric pressure
b.
Absolute pressure
c.
Vacuum pressure
d.
Gauge pressure
• Question 23
0 out of 3.3 points
A device for measuring the velocity of wind
Selected Answer: [None Given]
Answers: a.
anemograph
b.
anemoscope
c.
aneroid barometer
d.
anemometer
• Question 24
0 out of 3.3 points
In a confined gas, if the absolute temperature is held constant, the volume is
inversely proportional to the absolute pressure.
Selected Answer: [None Given]
Answers: a.
Dalton’s law
b.
Charles law
c.
Avogadro’s law
d.
Boyle’s law
• Question 25
0 out of 3.3 points
The coefficient of the velocity, Cv accounts for the:
Selected Answer: [None Given]
Answers: a.
Effects on the flow area of contraction, friction, and turbulence
b.
Effects of compressibility
c.
Small effect of friction and turbulence of the orifice
d.
Changes in diameters of converging pipe
• Question 26
0 out of 3.3 points
It is the energy stored within the body.
Selected Answer: [None Given]
Answers: a.
heat
b.
internal energy
c.
enthalpy
d.
entropy
• Question 27
0 out of 3.3 points
What is the expression for heat of vaporization?
Selected Answer: [None Given]
Answers: a.
hg
b.
hf
c.
hg - hf
d.
hf - hg
• Question 28
0 out of 3.3 points
The statement that emissivity and absorptivity of a surface is surrounded by its
own temperature the same for both monochromatic and total radiation is called:
Selected Answer: [None Given]
Answers: a.
D’Alambart’s
b.
Lambert’s Law
c.
Kirchoff’s Law
d.
Law of emissivity
• Question 29
0 out of 3.3 points
The rate of radiant energy, that is emitted by a surface at any temperature and
in small wavelengths is found from the known rate of energy, that under the
same conditions will be emitted from a black surface, by multiplying with the
absorptivity. The above enunciation is called:
Selected Answer: [None Given]
Answers: a.
Lambert’s law
b.
Kirchhoff’s law
c.
Stefan Boltzmann’s law
d.
Planck’s law
• Question 30
0 out of 3.3 points
What is the process that has no heat transfer?
Selected Answer: [None Given]
Answers: a.
polytropic
b.
adiabatic
c.
reversible isometric
d.
isothermal
• Question 1
0 out of 3.3 points
The matching of scale model and full-scale results for a fluid dynamic
phenomena with a free surface requires equality of:
Selected Answer: a.
Reynolds number
Answers: a.
Reynolds number
b.
Weber number
c.
Froude number
d.
Cauchy number
• Question 2
3.3 out of 3.3 points
A nozzle is used to
Selected Answer: a.
increase velocity and decrease pressure
Answers: a.
increase velocity and decrease pressure
b.
decrease velocity and increase pressure
c.
decrease velocity as well as pressure
d.
increase velocity as well as pressure
• Question 3
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: a.
Increasing and decreasing temperature
Answers: a.
Increasing and decreasing temperature
b.
Decreasing temperature
c.
Constant temperature
d.
Increasing temperature
• Question 4
3.3 out of 3.3 points
The water hammer phenomenon is primarily what kind of fluid mechanisms?
Selected Answer: a.
Dynamic (a time- dependent phenomena)
Answers: a.
Dynamic (a time- dependent phenomena)
b.
Static (a phenomena independent of time)
c.
Compressible
d.
Incompressible
• Question 5
3.3 out of 3.3 points
In a four stroke engine, for the combustion of one liter of fuel, the volume of air
needed would approximately
Selected Answer: a.
9-10 cu. m
Answers: a.
9-10 cu. m
b.
5-7 cu. m
c.
1 cu. m
d.
2 cu. m
• Question 6
0 out of 3.3 points
The type of filter where the filtering elements is replaceable
Selected Answer: a.
Pressure filter
Answers: a.
Pressure filter
b.
Filer with element
c.
Paper edge filter
d.
Metal edge filter
• Question 7
0 out of 3.3 points
If a substance temperature is less than its saturation temperature , the
substance is:
Selected Answer: a.
saturated vapor
Answers: a.
saturated vapor
b.
superheated vapor
c.
subcooled liquid
d.
wet vapor
• Question 8
0 out of 3.3 points
What is the temperature difference of the cycle if the entropy difference Is S, and
the work done is W?
Selected Answer: [None Given]
Answers: a.
S/W
b.
W/S
c.
W-S
d.
S-W
• Question 9
0 out of 3.3 points
Energy changes are represented by all except which one of the following
Selected Answer: [None Given]
Answers: a.
mCpdt
b.
Tds – Pdv
c.
dQ/T
d.
– ?Vdp
• Question 10
0 out of 3.3 points
Which one of the following is standard temperature and pressure (STP)
Selected Answer: [None Given]
Answers: a.
0k and 1 atm pressure
b.
0f and zero pressure
c.
0 C and 1 atm pressure
d.
32 F and zero pressure
• Question 11
0 out of 3.3 points
The general chemical formula for all hydrocarbons is CnHm. In different
combination of interest, as internal combustion engine fuel, n varies from:
Selected Answer: [None Given]
Answers: a.
2 to 54
b.
2 to 26
c.
1 to 54
d.
1 to 26
• Question 12
0 out of 3.3 points
The first law of the thermodynamics is based on which of the following principle?
Selected Answer: [None Given]
Answers: a.
Enthalpy-entropy relationship
b.
Conservation of mass
c.
Conservation of energy
d.
Entropy-temperature relationship
• Question 13
0 out of 3.3 points
The king pin inclination is generally:
Selected Answer: [None Given]
Answers: a.
Less than 0.5
b.
More than 9
c.
Between 1 and 2
d.
Between 2 and 5
• Question 14
0 out of 3.3 points
The rate of radiation does not depend on which of the following?
Selected Answer: [None Given]
Answers: a.
The temperature of the radiating body
b.
The emissivity of the radiating body
c.
The area of the radiating body
d.
The thickness of the radiating body
• Question 15
0 out of 3.3 points
What usually happens to the surrounding when water vapor condenses?
Selected Answer: [None Given]
Answers: a.
The surrounding temperature decreases
b.
It neither warm nor cold the surrounding
c.
It warms the surrounding
d.
It neither warm nor cold the surrounding
• Question 16
0 out of 3.3 points
The measure of the randomness of the molecules of a substance.
Selected Answer: [None Given]
Answers: a.
enthalpy
b.
internal energy
c.
entropy
d.
heat
• Question 17
0 out of 3.3 points
In heat exchanger design, one transfer unit implies:
Selected [None Given]
Answer:
Answers: a.
The section of heat exchanger which will cause temperature drop
of one degree centigrade
b.
One fluid which is exchanging with another fluid of the same
chemical composition
c.
Condition when the change in temperature of one steam is
numerically equal to the average driving force
d.
The section of heat exchanger where heat transfer surface area
has been one square meter
• Question 18
0 out of 3.3 points
The variation of pressure in an isobaric process is:
Selected Answer: [None Given]
Answers: a.
Linear with temperature
b.
Inversely proportional to temperature
c.
Described by the perfect gas law
d.
Zero
• Question 19
0 out of 3.3 points
The locus of elevation to which water will rise in the piezometer tube is termed:
Selected Answer: [None Given]
Answers: a.
Critical path
b.
Energy gradient
c.
Friction head
d.
Hydraulic gradient
• Question 20
0 out of 3.3 points
Air that controls the rat of combustion in the combustion chamber is known as:
Selected Answer: [None Given]
Answers: a.
Control air
b.
Excess air
c.
Primary air
d.
Secondary air
• Question 21
0 out of 3.3 points
The state of a thermodynamic system is always defined by its:
Selected Answer: [None Given]
Answers: a.
properties
b.
process
c.
absolute temperature
d.
temperature and pressure
• Question 22
0 out of 3.3 points
Percent excess air is the difference between the air actually supplied and the
theoretically required divided by
Selected Answer: [None Given]
Answers: a.
The theoretically air supplied
b.
The deficiency of air supplied
c.
The actually air supplied
d.
The sufficient air supplied
• Question 23
0 out of 3.3 points
In a hot wire anemometer the rate of heat loss from sensing element is a function
of:
Selected Answer: [None Given]
Answers: a.
Pressure
b.
Velocity of flow
c.
All of the other choices
d.
Mass rate of flow
• Question 24
0 out of 3.3 points
The pressure measured above a perfect vacuum.
Selected Answer: [None Given]
Answers: a.
gage pressure
b.
absolute pressure
c.
vacuum pressure
d.
atmospheric pressure
• Question 25
0 out of 3.3 points
What is the true about the polytropic exponent n for a perfect gas undergoing an
isobaric process?
Selected Answer: [None Given]
Answers: a.
n=8
b.
n=0
c.
n >0
d.
n<0
• Question 26
0 out of 3.3 points
What is the pressure above zero?
Selected Answer: [None Given]
Answers: a.
Absolute pressure
b.
Vacuum pressure
c.
Gage pressure
d.
Atmospheric pressure
• Question 27
0 out of 3.3 points
Isentropic flow is
Selected Answer: [None Given]
Answers: a.
Reversible adiabatic flow
b.
Ideal fluid flow
c.
Irreversible adiabatic flow
d.
Perfect gas flow
• Question 28
0 out of 3.3 points
All heat transfer processes:
Selected Answer: [None Given]
Answers: a.
Involve temperature difference between the bodies
b.
Involve transfer of energy
c.
Obey first law of thermodynamics
d.
Obey second law of thermodynamics
• Question 29
0 out of 3.3 points
Exhaust gases from an engine posses:
Selected Answer: [None Given]
Answers: a.
stored energy
b.
solar energy
c.
kinetic energy
d.
chemical energy
• Question 30
0 out of 3.3 points
According to Clausius statement
Selected [None Given]
Answer:
Answers: a.
Heat flow from hot surface to cold surface unaided
b.
A and C
c.
Heat cannot flow from cold substance to hot substance
d.
Heat can flow from cold substance to substance with the aid of
external work
• Question 1
0 out of 3.3 points
In a closed system (with a moving boundary) which of the following represents
work done during an isothermal process?
Selected Answer: a.
W = (P2V2 - P1V1) / (1 – n)
Answers: a.
W = (P2V2 - P1V1) / (1 – n)
b.
W = P(V2 - V1)
c.
W = P1V1 ln (V2/V1)
d.
W=0
• Question 2
0 out of 3.3 points
The function of a heat exchanger is to:
Selected a.
Answer: Exchange heat to increase energy of the flow
Answers: a.
Exchange heat to increase energy of the flow
b.
Transfer heat from one fluid to another
c.
Increase the water temperature entering the boiler and decrease
combustion requirements
d.
Increase the total energy of the flow
• Question 3
0 out of 3.3 points
Which of the following is not a heat exchanger?
Selected Answer: a.
Evaporators
Answers: a.
Evaporators
b.
Condenser
c.
Water hammer
d.
Boilers
• Question 4
0 out of 3.3 points
The rate at which heat flows through a slab of some material does not depend
on which of the following?
Selected Answer: a.
The temperature difference between two faces
Answers: a.
The temperature difference between two faces
b.
The thickness of the slab
c.
The specific heat of the material
d.
The area of the slab
• Question 5
3.3 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called _________.
Selected Answer: a.
Sink
Answers: a.
Sink
b.
Source
c.
Cold reservoir
d.
Heat reservoir
• Question 6
0 out of 3.3 points
Clog point of an oil refer to:
Selected a.
Answer: the temperature at which oil solidifies
Answers: a.
the temperature at which oil solidifies
b.
the temperature at which paraffin ad waxes in oil start
precipitating
c.
the level of impurities beyond which oil ceases to flow
d.
the point of maximum contamination of oil
• Question 7
0 out of 3.3 points
The process of separating two or more liquids means of the difference in their
boiling point.
Selected Answer: a.
Gas scrubbing
Answers: a.
Gas scrubbing
b.
Fractional crystallization
c.
Engler distillation
d.
Fractional distillation
• Question 8
0 out of 3.3 points
The reciprocal of density is?
Selected Answer: [None Given]
Answers: a.
Specific weight
b.
Specific volume
c.
Specific heat
d.
Specific gravity
• Question 9
0 out of 3.3 points
A type of radiation consisting of singly charge particles that generate to
intermediate distances.
Selected Answer: [None Given]
Answers: a.
Beta radiation
b.
Nuclear radiation
c.
Gamma radiation
d.
Alpha radiation
• Question 10
0 out of 3.3 points
In a closed vessel, when vaporization takes place, the temperature rises. Due to the
rising temperature, the pressure increases until an equilibrium is established
between the temperature and pressure. The temperature of equilibrium is called:
Selected Answer: [None Given]
Answers: a.
Dew point
b.
Boiling point
c.
Superheated temperature
d.
Ice point
• Question 11
0 out of 3.3 points
The sum of the energies of all the molecules in a system where energies appear
in several complex forms is the:
Selected Answer: [None Given]
Answers: a.
Potential energy
b.
Frictional energy
c.
Internal energy
d.
Kinetic energy
• Question 12
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Black body
b.
Gray body
c.
White body
d.
Red hot body
• Question 13
0 out of 3.3 points
The coefficient of the velocity, Cv accounts for the:
Selected Answer: [None Given]
Answers: a.
Small effect of friction and turbulence of the orifice
b.
Effects of compressibility
c.
Changes in diameters of converging pipe
d.
Effects on the flow area of contraction, friction, and turbulence
• Question 14
0 out of 3.3 points
The minimum amount of air required for a complete combustion of fuel is called
Selected Answer: [None Given]
Answers: a.
Theoretical air
b.
Excess air
c.
Dry air
d.
Flue gas
• Question 15
0 out of 3.3 points
Which is not correct for calculating air standard efficiency?
Selected Answer: [None Given]
Answers: a.
Gases dissociate at higher temperature
b.
Specific heat remains unchanged at all temperatures
c.
All processes are reversible
d.
No account of the mechanism of heat transfer is considered
• Question 16
0 out of 3.3 points
A spark voltage requires voltage of:
Selected Answer: [None Given]
Answers: a.
220 V
b.
440 V
c.
112 V
d.
124 V
• Question 17
0 out of 3.3 points
Which of the following is not the universal gas constant?
Selected Answer: [None Given]
Answers: a.
8.314 kJ/kmol-K
b.
8314 kJ/mol-K
c.
8.314 J/mol-K
d.
1545 ft-lb/lbmol-R
• Question 18
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
variable pressure
b.
complex pressure
c.
compound pressure
d.
positive and negative pressure
• Question 19
0 out of 3.3 points
The smallest subdivision of a compound that can exist in a natural state is a/an
Selected Answer: [None Given]
Answers: a.
Molecule
b.
Proton
c.
Atom
d.
Electron
• Question 20
0 out of 3.3 points
An Orsat’s apparatus is used for
Selected Answer: [None Given]
Answers: a.
Gravimetric analysis of the flue gas
b.
Smoke density analysis of the flue gas
c.
All of the other choices
d.
Volumetric analysis of the flue gas
• Question 21
0 out of 3.3 points
Exhaust gas leakage into the cooling system is most likely occur because of
defective:
Selected Answer: [None Given]
Answers: a.
Water pump
b.
Cylinder head gasket
c.
Manifold gasket
d.
Any of the other choices
• Question 22
0 out of 3.3 points
Percent excess air is the difference between the air actually supplied and the
theoretically required divided by
Selected Answer: [None Given]
Answers: a.
The sufficient air supplied
b.
The theoretically air supplied
c.
The deficiency of air supplied
d.
The actually air supplied
• Question 23
0 out of 3.3 points
The thermal efficiency of a dual cycle engine with fixed compression ratio and fixed
quantity of heat and with increase in pressure ratio, will
Selected Answer: [None Given]
Answers: a.
Remain same
b.
Decrease
c.
Depends on other factors
d.
Increase
• Question 24
0 out of 3.3 points
Which of the following reasons why one gram of steam at 100°C causes more
serious burn than 1 gram of water at 100°C?
Selected Answer: [None Given]
Answers: a.
Steam is less dense than boiling water
b.
Steam is everywhere thus it strikes greater force
c.
Steam contains more internal energy
d.
The steam has higher specific heat
• Question 25
0 out of 3.3 points
The primary purpose of a turbine in a fluid is to:
Selected Answer: [None Given]
Answers: a.
Add mass to the flow
b.
None of the other choices
c.
Extract energy from the flow
d.
Add energy to the flow
• Question 26
0 out of 3.3 points
The mechanical efficiency of a device is the ratio of the
Selected [None Given]
Answer:
Answers: a.
Mechanical energy input to the mechanical energy output of the
device
b.
Ideal energy input to the actual energy input
c.
Actual to the ideal energy input
d.
Actual energy extracted to the ideal energy extracted
• Question 27
0 out of 3.3 points
Stoichiometric ratio is
Selected Answer: [None Given]
Answers: a.
Theoretical mixture of air for complete combustion
b.
Chemically correct air-fuel ratio by volume
c.
Actual ratio of air to fuel for maximum efficiency
d.
Chemically correct air- fuel ratio by weight
• Question 28
0 out of 3.3 points
In actual gases the molecular collisions are:
Selected Answer: [None Given]
Answers: a.
Inplastic
b.
Inelastic
c.
Elastic
d.
Plastic
• Question 29
0 out of 3.3 points
Flash point for diesel fuel oil should be:
Selected Answer: [None Given]
Answers: a.
Maximum 490 C
b.
Maximum 49 C
c.
Maximum 300 C
d.
Maximum 200 C
• Question 30
0 out of 3.3 points
Which of the following relations is not applicable in a free expansion process?
Selected Answer: [None Given]
Answers: a.
Work done is zero
b.
Heat rejected is zero
c.
Heat supplied is zero
d.
Change in temperature is zero
• Question 1
0 out of 3.3 points
In a closed system (with a moving boundary) which of the following represents
work done during an isothermal process?
Selected Answer: a.
W = (P2V2 - P1V1) / (1 – n)
Answers: a.
W = (P2V2 - P1V1) / (1 – n)
b.
W = P(V2 - V1)
c.
W = P1V1 ln (V2/V1)
d.
W=0
• Question 2
0 out of 3.3 points
The function of a heat exchanger is to:
Selected a.
Answer: Exchange heat to increase energy of the flow
Answers: a.
Exchange heat to increase energy of the flow
b.
Transfer heat from one fluid to another
c.
Increase the water temperature entering the boiler and decrease
combustion requirements
d.
Increase the total energy of the flow
• Question 3
0 out of 3.3 points
Which of the following is not a heat exchanger?
Selected Answer: a.
Evaporators
Answers: a.
Evaporators
b.
Condenser
c.
Water hammer
d.
Boilers
• Question 4
0 out of 3.3 points
The rate at which heat flows through a slab of some material does not depend
on which of the following?
Selected Answer: a.
The temperature difference between two faces
Answers: a.
The temperature difference between two faces
b.
The thickness of the slab
c.
The specific heat of the material
d.
The area of the slab
• Question 5
3.3 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called _________.
Selected Answer: a.
Sink
Answers: a.
Sink
b.
Source
c.
Cold reservoir
d.
Heat reservoir
• Question 6
0 out of 3.3 points
Clog point of an oil refer to:
Selected a.
Answer: the temperature at which oil solidifies
Answers: a.
the temperature at which oil solidifies
b.
the temperature at which paraffin ad waxes in oil start
precipitating
c.
the level of impurities beyond which oil ceases to flow
d.
the point of maximum contamination of oil
• Question 7
0 out of 3.3 points
The process of separating two or more liquids means of the difference in their
boiling point.
Selected Answer: a.
Gas scrubbing
Answers: a.
Gas scrubbing
b.
Fractional crystallization
c.
Engler distillation
d.
Fractional distillation
• Question 8
0 out of 3.3 points
The reciprocal of density is?
Selected Answer: [None Given]
Answers: a.
Specific weight
b.
Specific volume
c.
Specific heat
d.
Specific gravity
• Question 9
0 out of 3.3 points
A type of radiation consisting of singly charge particles that generate to
intermediate distances.
Selected Answer: [None Given]
Answers: a.
Beta radiation
b.
Nuclear radiation
c.
Gamma radiation
d.
Alpha radiation
• Question 10
0 out of 3.3 points
In a closed vessel, when vaporization takes place, the temperature rises. Due to the
rising temperature, the pressure increases until an equilibrium is established
between the temperature and pressure. The temperature of equilibrium is called:
Selected Answer: [None Given]
Answers: a.
Dew point
b.
Boiling point
c.
Superheated temperature
d.
Ice point
• Question 11
0 out of 3.3 points
The sum of the energies of all the molecules in a system where energies appear
in several complex forms is the:
Selected Answer: [None Given]
Answers: a.
Potential energy
b.
Frictional energy
c.
Internal energy
d.
Kinetic energy
• Question 12
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Black body
b.
Gray body
c.
White body
d.
Red hot body
• Question 13
0 out of 3.3 points
The coefficient of the velocity, Cv accounts for the:
Selected Answer: [None Given]
Answers: a.
Small effect of friction and turbulence of the orifice
b.
Effects of compressibility
c.
Changes in diameters of converging pipe
d.
Effects on the flow area of contraction, friction, and turbulence
• Question 14
0 out of 3.3 points
The minimum amount of air required for a complete combustion of fuel is called
Selected Answer: [None Given]
Answers: a.
Theoretical air
b.
Excess air
c.
Dry air
d.
Flue gas
• Question 15
0 out of 3.3 points
Which is not correct for calculating air standard efficiency?
Selected Answer: [None Given]
Answers: a.
Gases dissociate at higher temperature
b.
Specific heat remains unchanged at all temperatures
c.
All processes are reversible
d.
No account of the mechanism of heat transfer is considered
• Question 16
0 out of 3.3 points
A spark voltage requires voltage of:
Selected Answer: [None Given]
Answers: a.
220 V
b.
440 V
c.
112 V
d.
124 V
• Question 17
0 out of 3.3 points
Which of the following is not the universal gas constant?
Selected Answer: [None Given]
Answers: a.
8.314 kJ/kmol-K
b.
8314 kJ/mol-K
c.
8.314 J/mol-K
d.
1545 ft-lb/lbmol-R
• Question 18
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
variable pressure
b.
complex pressure
c.
compound pressure
d.
positive and negative pressure
• Question 19
0 out of 3.3 points
The smallest subdivision of a compound that can exist in a natural state is a/an
Selected Answer: [None Given]
Answers: a.
Molecule
b.
Proton
c.
Atom
d.
Electron
• Question 20
0 out of 3.3 points
An Orsat’s apparatus is used for
Selected Answer: [None Given]
Answers: a.
Gravimetric analysis of the flue gas
b.
Smoke density analysis of the flue gas
c.
All of the other choices
d.
Volumetric analysis of the flue gas
• Question 21
0 out of 3.3 points
Exhaust gas leakage into the cooling system is most likely occur because of
defective:
Selected Answer: [None Given]
Answers: a.
Water pump
b.
Cylinder head gasket
c.
Manifold gasket
d.
Any of the other choices
• Question 22
0 out of 3.3 points
Percent excess air is the difference between the air actually supplied and the
theoretically required divided by
Selected Answer: [None Given]
Answers: a.
The sufficient air supplied
b.
The theoretically air supplied
c.
The deficiency of air supplied
d.
The actually air supplied
• Question 23
0 out of 3.3 points
The thermal efficiency of a dual cycle engine with fixed compression ratio and fixed
quantity of heat and with increase in pressure ratio, will
Selected Answer: [None Given]
Answers: a.
Remain same
b.
Decrease
c.
Depends on other factors
d.
Increase
• Question 24
0 out of 3.3 points
Which of the following reasons why one gram of steam at 100°C causes more
serious burn than 1 gram of water at 100°C?
Selected Answer: [None Given]
Answers: a.
Steam is less dense than boiling water
b.
Steam is everywhere thus it strikes greater force
c.
Steam contains more internal energy
d.
The steam has higher specific heat
• Question 25
0 out of 3.3 points
The primary purpose of a turbine in a fluid is to:
Selected Answer: [None Given]
Answers: a.
Add mass to the flow
b.
None of the other choices
c.
Extract energy from the flow
d.
Add energy to the flow
• Question 26
0 out of 3.3 points
The mechanical efficiency of a device is the ratio of the
Selected [None Given]
Answer:
Answers: a.
Mechanical energy input to the mechanical energy output of the
device
b.
Ideal energy input to the actual energy input
c.
Actual to the ideal energy input
d.
Actual energy extracted to the ideal energy extracted
• Question 27
0 out of 3.3 points
Stoichiometric ratio is
Selected Answer: [None Given]
Answers: a.
Theoretical mixture of air for complete combustion
b.
Chemically correct air-fuel ratio by volume
c.
Actual ratio of air to fuel for maximum efficiency
d.
Chemically correct air- fuel ratio by weight
• Question 28
0 out of 3.3 points
In actual gases the molecular collisions are:
Selected Answer: [None Given]
Answers: a.
Inplastic
b.
Inelastic
c.
Elastic
d.
Plastic
• Question 29
0 out of 3.3 points
Flash point for diesel fuel oil should be:
Selected Answer: [None Given]
Answers: a.
Maximum 490 C
b.
Maximum 49 C
c.
Maximum 300 C
d.
Maximum 200 C
• Question 30
0 out of 3.3 points
Which of the following relations is not applicable in a free expansion process?
Selected Answer: [None Given]
Answers: a.
Work done is zero
b.
Heat rejected is zero
c.
Heat supplied is zero
d.
Change in temperature is zero
• Question 1
0 out of 3.3 points
The device that measure temperature by the electromotive force called
thermocouple was discovered by:
Selected Answer: a.
Galileo
Answers: a.
Galileo
b.
Fahrenheit
c.
Seebeck
d.
Celcius
• Question 2
0 out of 3.3 points
The force of gravity on the body?
Selected Answer: a.
Specific volume
Answers: a.
Specific volume
b.
Weight
c.
Specific gravity
d.
Specific weight
• Question 3
0 out of 3.3 points
A substance whose state is define by variable intensive thermodynamics
properties.
Selected Answer: a.
pure substance
Answers: a.
pure substance
b.
water
c.
vapor
d.
simple substance
• Question 4
0 out of 3.3 points
How do you call of removing of impurities from a gas by bubbling it through a
liquid purifying agent?
Selected Answer: a.
Gas bubbling
Answers: a.
Gas bubbling
b.
Gas scrubbing
c.
Gas purifying
d.
Gas liquefying
• Question 5
0 out of 3.3 points
Air standard efficiency of a diesel engine depends on:
Selected Answer: a.
Speed
Answers: a.
Speed
b.
Compression ratio
c.
Torque
d.
Fuel
• Question 6
0 out of 3.3 points
Hydrocarbons with 5 to 15 carbon atoms are:
Selected Answer: a.
Mixtures of many kinds of hydro carbons
Answers: a.
Mixtures of many kinds of hydro carbons
b.
Commercial fuels
c.
More or less volatile light oils
d.
Referred to as heavy oils
• Question 7
0 out of 3.3 points
On what plane is the Mollier diagram plotted
Selected Answer: a.
p-V
Answers: a.
p-V
b.
h-s
c.
p-T
d.
h-u
• Question 8
3.3 out of 3.3 points
For which type of process does the equation dq = Tds hold
Selected Answer: a.
reversible
Answers: a.
reversible
b.
isobaric
c.
isothermal
d.
irreversible
• Question 9
0 out of 3.3 points
The equilibrium distance between elements in an ionic bond is function of all the
following except:
Selected Answer: [None Given]
Answers: a.
Coordination number
b.
Atomic weight
c.
Temperature
d.
Ionic charge
• Question 10
0 out of 3.3 points
One of the reasons for insulating the pipes is:
Selected Answer: [None Given]
Answers: a.
Heat loss from the surface is minimized
b.
Capacity to withstand pressure is increased
c.
They may not break under pressure
d.
There is minimum corrosion
• Question 11
0 out of 3.3 points
What is the heat transfer due to density differential?
Selected Answer: [None Given]
Answers: a.
Convection
b.
Nuclear
c.
Conduction
d.
Radiation
• Question 12
0 out of 3.3 points
Thermal conduction is described by:
Selected Answer: [None Given]
Answers: a.
The Stefan – Boltzmann law
b.
The logarithmic mean temperature difference
c.
Fourier’s Law
d.
Newton’s Law
• Question 13
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if the temperature is
extremely high?
Selected Answer: [None Given]
Answers: a.
Almost constant except for ferromagnetic materials
b.
Increases except for steel
c.
Approaches infinity
d.
Decreases except for ferrous metals
• Question 14
0 out of 3.3 points
A close vessel, when vaporization takes place, the temperature rises. Due to the
rising temperature, the pressure increases until an equilibrium established
between the temperature and pressure. The temperature of equilibrium is
called______.
Selected Answer: [None Given]
Answers: a.
Ice point
b.
Super heated temperature
c.
Boiling point
d.
Dew point
• Question 15
0 out of 3.3 points
The process of separating two or more liquids means of the difference in their
boiling point.
Selected Answer: [None Given]
Answers: a.
Engler distillation
b.
Gas scrubbing
c.
Fractional crystallization
d.
Fractional distillation
• Question 16
0 out of 3.3 points
The ideal cycle based on the concept that the combustion process is both diesel and
gasoline in the combination of heat transfer processes that is constant pressure
and constant volume.
Selected Answer: [None Given]
Answers: a.
Dual cycle
b.
Brayton cycle
c.
Ericsson cycle
d.
Rankine cycle
• Question 17
0 out of 3.3 points
A reservoir that supplies energy in the form of heat is called:
Selected Answer: [None Given]
Answers: a.
Source
b.
Cold reservoir
c.
Sink
d.
Heat reservoir
• Question 18
0 out of 3.3 points
Based on the first law of thermodynamics, which of the following is wrong?
Selected [None Given]
Answer:
Answers: a.
The net heat transfer equal the net work of the cycle
b.
The heat transfer equals the work plus energy change
c.
The net heat transfer equals the energy change if no work is
done
d.
The heat transfer cannot exceed the work done
• Question 19
0 out of 3.3 points
The instrument used to measure atmospheric pressure is:
Selected Answer: [None Given]
Answers: a.
Venturi
b.
Barometer
c.
Rotator
d.
Manometer
• Question 20
0 out of 3.3 points
Which of the following is not the universal gas constant?
Selected Answer: [None Given]
Answers: a.
8.314 J/mol-K
b.
8.314 kJ/kmol-K
c.
1545 ft-lb/lbmol-R
d.
8314 kJ/mol-K
• Question 21
0 out of 3.3 points
One watt is:
Selected Answer: [None Given]
Answers: a.
1Nm/ min
b.
1Nm/ hr
c.
1kNm/s
d.
1Nm/s
• Question 22
0 out of 3.3 points
By supercharging:
Selected Answer: [None Given]
Answers: a.
Power stroke becomes stronger
b.
Loss in exhaust gets reduced
c.
Engine can be made to run smoother
d.
Thermal efficiency of the engine can be improved
• Question 23
0 out of 3.3 points
When a system deviates infinitesimally from equilibrium at every instant of its
state, it is undergoing:
Selected Answer: [None Given]
Answers: a.
isometric process
b.
cyclic process
c.
isobaric process
d.
quasi-static process
• Question 24
0 out of 3.3 points
The continuity equation is applicable to
Selected Answer: [None Given]
Answers: a.
Viscous, unviscous fluids
b.
Compressibility of fluids
c.
Conservation of mass
d.
Steady, unsteady flow
• Question 25
0 out of 3.3 points
What is referred by control volume?
Selected Answer: [None Given]
Answers: a.
fixed region in space
b.
an isolated system
c.
reversible process only
d.
closed system
• Question 26
0 out of 3.3 points
What usually happen when a vapor condenses into a liquid?
Selected Answer: [None Given]
Answers: a.
It evolves heat
b.
It generates heat
c.
It boils with temperature less than 100°C
d.
Its temperature increases
• Question 27
0 out of 3.3 points
Piston rings are made of:
Selected Answer: [None Given]
Answers: a.
Carbon steel
b.
Cast iron
c.
Copper
d.
Alloy steel
• Question 28
0 out of 3.3 points
A finely divided carbon deposit by the smoke or flame is called
Selected Answer: [None Given]
Answers: a.
Residue
b.
Soot
c.
All of the choices
d.
Fly ash
• Question 29
0 out of 3.3 points
A process which gives the same states/conditions after the system undergoes a
series of process:
Selected Answer: [None Given]
Answers: a.
irreversible process
b.
cyclic process
c.
quasi-static process
d.
reversible process
• Question 30
0 out of 3.3 points
Stagnation enthalpy represents the enthalpy of a fluid when it is brought to rest:
Selected Answer: [None Given]
Answers: a.
Disobarically
b.
Isometrically
c.
Isothermally
d.
Adiabatically
• Question 1
0 out of 3.3 points
Adiabatic heat transfer within a vapor cycle refers to:
Selected a.
Answer: Heat transfer that is atmospheric bit not reversible
Answers: a.
Heat transfer that is atmospheric bit not reversible
b.
the net heat transfer equals the energy change if no work done.
c.
The transfer of energy from one stream to another in a heat
exchanger so that the energy of the input
d.
the net transfer equal the net work of the cycle
• Question 2
0 out of 3.3 points
Acceleration is proportional to force.
Selected Answer: a.
Law of gravitation
Answers: a.
Law of gravitation
b.
Theory of relativity
c.
Newton’s law
d.
Archimedes principle
• Question 3
3.3 out of 3.3 points
In series pipe systems, all of the ff parameters vary from section to section
except
Selected Answer: a.
Mass flow
Answers: a.
Mass flow
b.
Friction loss
c.
Pressure drop
d.
Head loss
• Question 4
3.3 out of 3.3 points
Which of the following is true for water at a reference temperature where enthalpy
is zero?
Selected Answer: a.
internal energy is negative
Answers: a.
internal energy is negative
b.
vapor pressure is zero
c.
specific volume is zero
d.
entropy is non-zero
• Question 5
0 out of 3.3 points
In regenerator type heat exchanger, heat transfer occurs by:
Selected Answer: a.
A complete separation between hot and cold fluids
Answers: a.
A complete separation between hot and cold fluids
b.
Cold and hot fluids alternately over a surface
c.
Direct mixing of hot and cold fluids
d.
Generation of heat again and again
• Question 6
0 out of 3.3 points
To engage, securely and prevent dragging the clearance between bearing and
release collar in a clutch is generally:
Selected Answer: a.
20-22 mm
Answers: a.
20-22 mm
b.
2-3 mm
c.
30-32 mm
d.
10–12 mm
• Question 7
0 out of 3.3 points
What do you call the conversion technology that yields electricity straight from
sun light without the aid of a working substance like gas or steam without the
use of any mechanical cycle?
Selected Answer: a.
Solar thermal conversion
Answers: a.
Solar thermal conversion
b.
Stirling cycle conversion
c.
Photovoltaic-energy conversion
d.
Power conversion
• Question 8
0 out of 3.3 points
In parallel pipe system originating and terminating in common junctions,
Selected Answer: [None Given]
Answers: a.
Pressure drops through each branch are equal
b.
Lengths of each branch are equal
c.
Mass flows through each branch are equal
d.
Flow areas of each branch are equal
• Question 9
0 out of 3.3 points
The solid – liquid equilibrium of Tim is at what temperature?
Selected Answer: [None Given]
Answers: a.
38.87°C
b.
231.9°C
c.
231.9°C
d.
- 38.87°C
• Question 10
0 out of 3.3 points
Morse test is conducted on :
Selected Answer: [None Given]
Answers: a.
Multi-cylinder engines
b.
Vertical engines
c.
Horizontal engines
d.
Single – cylinder engines
• Question 11
0 out of 3.3 points
The mechanism of heat transfer in which there is no medium ( i.e. water, air,
solid concrete) required for the heat energy to travel is:
Selected Answer: [None Given]
Answers: a.
radiation
b.
conduction
c.
convection
d.
diffusion
• Question 12
0 out of 3.3 points
In a vehicle the most probable cause for hard steering may be:
Selected Answer: [None Given]
Answers: a.
Bent wheel spindle
b.
Low tire pressure
c.
Tie rod ends tight
d.
Any of the other choices
• Question 13
0 out of 3.3 points
A material’s specific heat can be defined as;
Selected [None Given]
Answer:
Answers: a.
a function of temperature.
b.
being different for constant pressure and constant temperature
processes.
c.
all of the other choices
d.
the ratio of heat required to change the temperature of mass by a
change in temperature.
• Question 14
0 out of 3.3 points
In conduction heat transfer, what happens to the heat transfer per unit time
when the thermal conductivity decreases?
Selected Answer: [None Given]
Answers: a.
the heat flow will partially increase and then will decrease
b.
the heat flow will increase
c.
the heat flow remains constant
d.
the heat flow will decrease
• Question 15
0 out of 3.3 points
The RMS velocity of hydrogen gas at NTP is approximately:
Selected Answer: [None Given]
Answers: a.
3838 m/s
b.
839 m/s
c.
1839 m/s
d.
4839 m/s
• Question 16
0 out of 3.3 points
Dirt or gum in fuel nozzle or jets can produce:
Selected Answer: [None Given]
Answers: a.
Smoky black exhaust
b.
Lack of engine power
c.
White exhaust
d.
Excessive fuel consumption
• Question 17
0 out of 3.3 points
The lowest portion to storage basin from where the water is not drawn is:
Selected Answer: [None Given]
Answers: a.
Sub-soil storage
b.
Spring reserve
c.
Bottom storage
d.
Dead storage
• Question 18
0 out of 3.3 points
The ff are examples of indirect (secondary) measurements to measure flow
rates using obstruction meters except:
Selected Answer: [None Given]
Answers: a.
Pitot static meters
b.
Direction-sensing probes
c.
Weight and mass scales
d.
Static pressure probes
• Question 19
0 out of 3.3 points
A system composed of ice and water at 0°C is said to be _______________.
Selected Answer: [None Given]
Answers: a.
a multiphase material
b.
all of the other choices
c.
in thermal equilibrium
d.
in thermodynamic equilibrium
• Question 20
0 out of 3.3 points
Which of the engine is used for fighter bomber?
Selected Answer: [None Given]
Answers: a.
rockets
b.
turbojet
c.
pulsejet
d.
ramjet
• Question 21
0 out of 3.3 points
The equivalent of ratio of emissive power to absorptivity for bodies in thermal
equilibrium is described by:
Selected Answer: [None Given]
Answers: a.
The logarithmic mean temperature difference
b.
Fourier’s law
c.
Newton’s Law
d.
Kirchoff’s law
• Question 22
0 out of 3.3 points
When H20 in the products of combustion is in liquid form the heating value is
known as:
Selected Answer: [None Given]
Answers: a.
Low and medium heating value
b.
Average heating value
c.
Higher heating value
d.
Lower heating value
• Question 23
0 out of 3.3 points
Volumetric efficiency of a well designed engine may be in the range of:
Selected Answer: [None Given]
Answers: a.
75 to 90%
b.
Below 30%
c.
60 to 75%
d.
30 to 50%
• Question 24
0 out of 3.3 points
The efficiency of hydraulic braking system is:
Selected Answer: [None Given]
Answers: a.
50-60%
b.
60-80%
c.
40-50%
d.
About 90%
• Question 25
0 out of 3.3 points
Equilibrium condition exists in all except which of the following?
Selected [None Given]
Answer:
Answers: a.
in processes where driving forces are infinitesimals
b.
in reversible processes
c.
in a steady state flow process
d.
where nothing can occur without an effect on the system’s
surrounding
• Question 26
0 out of 3.3 points
The locus of elevation is:
Selected Answer: [None Given]
Answers: a.
Energy gradient
b.
Friction
c.
Hydraulic gradient
d.
Critical point
• Question 27
0 out of 3.3 points
Avogadro’s number a fundamental constant of nature, is the number if molecules in
a gram-mole. This constant is
Selected Answer: [None Given]
Answers: a.
6.05222 x 1023
b.
6.02252 x 1023
c.
6.50222 x 1023
d.
6.20522 x 1023
• Question 28
0 out of 3.3 points
Which of the following is the basis for Bernoulli’s law for fluid flow?
Selected Answer: [None Given]
Answers: a.
the continuity equation
b.
the principle of conservation of energy
c.
fourier’s law
d.
the principle of conservation of mass
• Question 29
0 out of 3.3 points
The coefficient of velocity is equal to the:
Selected [None Given]
Answer:
Answers: a.
Actual velocity divided by the theoretical velocity
b.
Difference of the coefficient of discharge and the coefficient of
contraction
c.
Sum of the coefficient of discharge and the coefficient of
contraction
d.
Product of the coefficient of discharge and the coefficient of
contraction
• Question 30
0 out of 3.3 points
What fuel gas obtained by the destructive distillation of soft coal
Selected Answer: [None Given]
Answers: a.
Coal gas
b.
Water gas
c.
Alcogas
d.
Gas scrub
• Question 1
0 out of 3.3 points
The smallest subdivision of a compound that can exist in a natural state is a/an
Selected Answer: a.
Atom
Answers: a.
Atom
b.
Molecule
c.
Proton
d.
Electron
• Question 2
0 out of 3.3 points
The king pin inclination is generally:
Selected Answer: a.
Between 1 and 2
Answers: a.
Between 1 and 2
b.
Less than 0.5
c.
More than 9
d.
Between 2 and 5
• Question 3
0 out of 3.3 points
Is a measure of the energy that is no longer available to perform useful work within
the current environment?
Selected Answer: a.
Molar value
Answers: a.
Molar value
b.
Absolute enthalpy
c.
Fugacity
d.
Absolute entropy
• Question 4
0 out of 3.3 points
A type of radiation consisting of singly charge particles that generate to
intermediate distances.
Selected Answer: a.
Nuclear radiation
Answers: a.
Nuclear radiation
b.
Alpha radiation
c.
Beta radiation
d.
Gamma radiation
• Question 5
3.3 out of 3.3 points
The ideal cycle based on the concept that the combustion process is both diesel and
gasoline in the combination of heat transfer processes that is constant pressure
and constant volume.
Selected Answer: a.
Dual cycle
Answers: a.
Dual cycle
b.
Ericsson cycle
c.
Brayton cycle
d.
Rankine cycle
• Question 6
3.3 out of 3.3 points
A substance whose burning with oxygen yields heat energy such as coal, petroleum
and natural gas.
Selected Answer: d.
Fuel
Answers: a.
Fluid
b.
Gas
c.
Air
d.
Fuel
• Question 7
0 out of 3.3 points
What is the expression for heat of vaporization?
Selected Answer: [None Given]
Answers: a.
hf - hg
b.
hg - hf
c.
hf
d.
hg
• Question 8
0 out of 3.3 points
Which of the following is the Stefan – Boltzmann constant?
Selected Answer: a.
4.78 x 10-10 W/m2K4
Answers: a.
4.78 x 10-10 W/m2K4
b.
7.67 x 10-9 W/m2K4
c.
5.77 x 10-7 W/m2K4
d.
5.67 x 10-8 W/m2K4
• Question 9
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Black body
b.
Gray body
c.
White body
d.
Red hot body
• Question 10
0 out of 3.3 points
What is the reason why Styrofoam is a good insulating material?
Selected [None Given]
Answer:
Answers: a.
The structure of Styrofoam is vary unsuitable and heat cannot
flow
b.
Styrofoam is a white object
c.
Because it contains many tiny pockets of air
d.
Styrofoam structure is very dense
• Question 11
0 out of 3.3 points
The statement that emissivity and absorptivity of a surface is surrounded by its
own temperature the same for both monochromatic and total radiation is called:
Selected Answer: [None Given]
Answers: a.
D’Alambart’s
b.
Lambert’s Law
c.
Kirchoff’s Law
d.
Law of emissivity
• Question 12
0 out of 3.3 points
The pressure measured above a perfect vacuum.
Selected Answer: [None Given]
Answers: a.
atmospheric pressure
b.
vacuum pressure
c.
gage pressure
d.
absolute pressure
• Question 13
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Parson
b.
Pelton
c.
Bankl
d.
Hero
• Question 14
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are negligible or
insignificant, the work input to an adiabatic compressor is___________.
Selected Answer: [None Given]
Answers: a.
Equal to change in enthalpy
b.
Infinity
c.
Zero
d.
Negligible
• Question 15
0 out of 3.3 points
A colorless, odorless mixture of nitrogen and oxygen with traces of other gases
water vapor and same impurities.
Selected Answer: [None Given]
Answers: a.
Helium
b.
Air
c.
Nitrite
d.
Water gas
• Question 16
0 out of 3.3 points
When a certain mass of fluid in particular state passes through a series of process
and returns to its initial state, it undergoes a:
Selected Answer: [None Given]
Answers: a.
revolution
b.
process
c.
cycle
d.
rotation
• Question 17
0 out of 3.3 points
What is the first law of thermodynamics?
Selected Answer: [None Given]
Answers: a.
heat energy cannot be completely transformed into work
b.
internal energy is due to molecular motions
c.
entropy of the universe is increased by irreversible processes
d.
energy can neither be created nor destroyed
• Question 18
0 out of 3.3 points
Which of the following is the cause of loss power?
Selected Answer: [None Given]
Answers: a.
Poor compression
b.
Low injection pressure
c.
Restricted exhaust
d.
Clogging of air cleaner
• Question 19
0 out of 3.3 points
What kind of bonding do common gases that exist in free state as diatomic
molecules experiences?
Selected Answer: [None Given]
Answers: a.
Nuclear bonds
b.
Covalent bonds
c.
Ionic bonds
d.
Metallic bonds
• Question 20
0 out of 3.3 points
An electrically charged atom or radical carries electricity through an electrolyte
is called:
Selected Answer: [None Given]
Answers: a.
Hole
b.
Ion
c.
Isotope
d.
Molecule
• Question 21
0 out of 3.3 points
Oil pan is attached:
Selected Answer: [None Given]
Answers: a.
In a separate unit away from the crankcase
b.
To the bottom of the cylinder block
c.
At the top of the cylinder block
d.
At the outside wall of the crank case
• Question 22
0 out of 3.3 points
When the water in the products of combustion is in the vapor state, the heating
value is:
Selected Answer: [None Given]
Answers: a.
Lower heating value
b.
Average heating value
c.
Higher heating value
d.
Gross calorific value
• Question 23
0 out of 3.3 points
Dirt or gum in fuel nozzle or jets can produce:
Selected Answer: [None Given]
Answers: a.
Excessive fuel consumption
b.
White exhaust
c.
Smoky black exhaust
d.
Lack of engine power
• Question 24
0 out of 3.3 points
The efficiency of hydraulic braking system is:
Selected Answer: [None Given]
Answers: a.
50-60%
b.
60-80%
c.
40-50%
d.
About 90%
• Question 25
0 out of 3.3 points
Work or energy can be function of all the following except
Selected Answer: [None Given]
Answers: a.
force and time
b.
temperature and entropy
c.
power and time
d.
force and time
• Question 26
0 out of 3.3 points
The relationship between the total pressure of a mixture of non-reacting gases
and the partial pressures of constituents is given by:
Selected Answer: [None Given]
Answers: a.
mole fractions
b.
volumetric fractions
c.
Dalton’s law
d.
gravimetric fractions
• Question 27
0 out of 3.3 points
What do you call the conversion technology that yields electricity straight from
sun light without the aid of a working substance like gas or steam without the
use of any mechanical cycle?
Selected Answer: [None Given]
Answers: a.
Photovoltaic-energy conversion
b.
Solar thermal conversion
c.
Stirling cycle conversion
d.
Power conversion
• Question 28
0 out of 3.3 points
The volume flow passes through a venturimeter is:
Selected Answer: [None Given]
Answers: a.
Constant
b.
Varying
c.
Increasing
d.
Decreasing
• Question 29
0 out of 3.3 points
What equation applies in the first law of thermodynamics for an ideal gas in a
reversible open steady-state system?
Selected Answer: [None Given]
Answers: a.
Q + vdp = h2 - h1
b.
Q - W = U2 - U1
c.
Q – Vdp = u2 - u1
d.
Q - pdv = h2 - h1
• Question 30
0 out of 3.3 points
The temperature of a pure substance at a temperature of absolute zero is:
Selected Answer: [None Given]
Answers: a.
Infinity
b.
Unity
c.
Zero
d.
100
• Question 1
0 out of 3.3 points
Nozzle does not involve any work interaction. The fluid through this device
experiences:
Selected Answer: a.
No change in kinetic energy
Answers: a.
No change in kinetic energy
b.
No change in potential energy
c.
No change in enthalpy
d.
Vacuum
• Question 2
0 out of 3.3 points
Air that controls the rat of combustion in the combustion chamber is known as:
Selected Answer: a.
Excess air
Answers: a.
Excess air
b.
Primary air
c.
Secondary air
d.
Control air
• Question 3
3.3 out of 3.3 points
The temperature at which lubricating will form a cloud.
Selected Answer: d.
Cloud point
Answers: a.
Critical point
b.
Pour point
c.
Boiling point
d.
Cloud point
• Question 4
0 out of 3.3 points
The nature of flow of a fluid inside a tube, whether it is turbulent or laminar, can
be ascertained by:
Selected Answer: a.
Viscosity of the fluid
Answers: a.
Viscosity of the fluid
b.
Surface conditions
c.
Flow velocity
d.
Reynolds number
• Question 5
0 out of 3.3 points
An Orsat’s apparatus is used for
Selected Answer: a.
Smoke density analysis of the flue gas
Answers: a.
Smoke density analysis of the flue gas
b.
All of the other choices
c.
Gravimetric analysis of the flue gas
d.
Volumetric analysis of the flue gas
• Question 6
0 out of 3.3 points
During an adiabatic, internally reversible process, what is true about the change in
entropy?
Selected Answer: a.
it is temperature-dependent
Answers: a.
it is temperature-dependent
b.
it is always less than zero
c.
it is always zero
d.
it is always greater than zero
• Question 7
0 out of 3.3 points
Which of the following does not belong to the group?
Selected Answer: a.
Gas admission system
Answers: a.
Gas admission system
b.
Air injection system
c.
Mechanical injection system
d.
Time injection system
• Question 8
0 out of 3.3 points
The solid – liquid equilibrium of Zinc is at what temperature?
Selected Answer: [None Given]
Answers: a.
231.9°C
b.
444.60°C
c.
419.505°C
d.
630.9°C
• Question 9
0 out of 3.3 points
In the cam, the distance between the base circle and the nose is known as
Selected Answer: [None Given]
Answers: a.
Nose
b.
Lobe
c.
Lift
d.
Flank
• Question 10
0 out of 3.3 points
Stagnation enthalpy represents the enthalpy of a fluid when it is brought to rest:
Selected Answer: [None Given]
Answers: a.
Adiabatically
b.
Isothermally
c.
Isometrically
d.
Disobarically
• Question 11
0 out of 3.3 points
If a substance temperature is less than its saturation temperature , the
substance is:
Selected Answer: [None Given]
Answers: a.
superheated vapor
b.
subcooled liquid
c.
saturated vapor
d.
wet vapor
• Question 12
0 out of 3.3 points
What is the SI unit of pressure?
Selected Answer: [None Given]
Answers: a.
Kg/cm2
b.
dynes/cm2
c.
psi
d.
pascal
• Question 13
0 out of 3.3 points
The stagnation of state is called the isentropic stagnation state when the
stagnation process is:
Selected Answer: [None Given]
Answers: a.
reversible as well dynamic
b.
adiabatic
c.
isotropic
d.
reversible as well as adiabatic
• Question 14
0 out of 3.3 points
The elongation and compression of a helical spring is an example of
Selected Answer: [None Given]
Answers: a.
reversible process
b.
isothermal process
c.
irreversible process
d.
adiabatic process
• Question 15
0 out of 3.3 points
A material’s specific heat can be defined as;
Selected [None Given]
Answer:
Answers: a.
being different for constant pressure and constant temperature
processes.
b.
a function of temperature.
c.
the ratio of heat required to change the temperature of mass by a
change in temperature.
d.
all of the other choices
• Question 16
0 out of 3.3 points
What is the process that has no heat transfer?
Selected Answer: [None Given]
Answers: a.
polytropic
b.
adiabatic
c.
isothermal
d.
reversible isometric
• Question 17
0 out of 3.3 points
The temperature measurement in an ordinary thermometer which has constant
specific humidity:
Selected Answer: [None Given]
Answers: a.
Wet bulb temperature
b.
Critical temperature
c.
Dew point temperature
• Question 18
0 out of 3.3 points
Energy changes are represented by all except which one of the following
Selected Answer: [None Given]
Answers: a.
Tds – Pdv
b.
mCpdt
c.
dQ/T
d.
– ?Vdp
• Question 19
0 out of 3.3 points
The ideal cycle based on the concept that the combustion process is both diesel and
gasoline in the combination of heat transfer processes that is constant pressure
and constant volume.
Selected Answer: [None Given]
Answers: a.
Brayton cycle
b.
Dual cycle
c.
Rankine cycle
d.
Ericsson cycle
• Question 20
0 out of 3.3 points
A substance that is able to absorb liquids or gasses and is used for removing
them from a given region or medium.
Selected Answer: [None Given]
Answers: a.
Absorbent
b.
Adhesive
c.
Cohesive
d.
Adsorbent
• Question 21
0 out of 3.3 points
All of the following are characteristics of metals except:
Selected Answer: [None Given]
Answers: a.
High melting points
b.
High electrical conductivities
c.
Tendency to form positive ions
d.
Tendency to form brittle solids
• Question 22
0 out of 3.3 points
Exhaust stroke of gasoline engine is also known as
Selected Answer: [None Given]
Answers: a.
Choking
b.
Supercharging
c.
Scavenging
d.
Knocking
• Question 23
0 out of 3.3 points
Which of the following is the equivalent heat transferred of a gas undergoing
isometric process?
Selected Answer: [None Given]
Answers: a.
change in enthalpy
b.
change in internal energy
c.
change in entropy
d.
work nonflow
• Question 24
0 out of 3.3 points
In a p-t diagram of a pure substance, the curve separating the solid phase from
liquid phase is:
Selected Answer: [None Given]
Answers: a.
boiling point
b.
sublimation point
c.
vaporization curve
d.
fusion curve
• Question 25
0 out of 3.3 points
Which of the following is the property of the solid that provides the measure of
the rate of heat transfer to the energy storage?
Selected Answer: [None Given]
Answers: a.
thermal diffusivity
b.
thermal conductivity
c.
thermal efficiency
d.
thermal radiography
• Question 26
0 out of 3.3 points
What is the series of process that eventually bring the system back to its original
condition
Selected Answer: [None Given]
Answers: a.
Reversible process
b.
Irreversible process
c.
Cycle
d.
Isentropic process
• Question 27
0 out of 3.3 points
A substance whose state is define by variable intensive thermodynamics
properties.
Selected Answer: [None Given]
Answers: a.
vapor
b.
pure substance
c.
water
d.
simple substance
• Question 28
0 out of 3.3 points
A substance that exists , or is regarded as existing, as a continuous characterized by
a low resistance to flow and the tendency to assume the shape of its container
Selected Answer: [None Given]
Answers: a.
molecule
b.
fluid
c.
atom
d.
vapor
• Question 29
0 out of 3.3 points
What is the main power generating plant that produces the most electricity per
unit thermal energy in the fuel input and has the greatest surplus of electricity for
most cogeneration system?
Selected Answer: [None Given]
Answers: a.
Gas turbine
b.
Diesel turbine
c.
Steam turbine
d.
Steam engine
• Question 30
0 out of 3.3 points
Weight per unit volume is termed as
Selected Answer: [None Given]
Answers: a.
density
b.
specific gravity
c.
weight density
d.
specific volume
• Question 1
0 out of 3.3 points
In turbine installation, the air is removed from condenser by
Selected Answer: a.
Air injector
Answers: a.
Air injector
b.
Air pump
c.
Air jet
d.
Air ejector
• Question 2
0 out of 3.3 points
A steam nozzle changes:
Selected Answer: a.
Heat energy into potential energy
Answers: a.
Heat energy into potential energy
b.
Kinetic energy into heat energy
c.
Heat energy into kinetic energy
d.
Potential energy into heat energy
• Question 3
3.3 out of 3.3 points
The minimum amount of air required for a complete combustion of fuel is called
Selected Answer: a.
Theoretical air
Answers: a.
Theoretical air
b.
Excess air
c.
Flue gas
d.
Dry air
• Question 4
0 out of 3.3 points
The total sulfur content in a diesel fuel must not exceed
Selected Answer: a.
0.8%
Answers: a.
0.8%
b.
0.3%
c.
011%
d.
0.5%
• Question 5
0 out of 3.3 points
Flow measuring devices include all of the following except:
Selected Answer: a.
Pitot tubes
Answers: a.
Pitot tubes
b.
Flow nozzles
c.
Venture area meters
d.
Precision tachometers
• Question 6
3.3 out of 3.3 points
Properties of a superheated vapor are given by:
Selected a.
Answer: a superheated table
Answers: a.
a superheated table
b.
Viral equation state
c.
the perfect gas law
d.
a one to one relationship, such as the properties of saturated
steam
• Question 7
0 out of 3.3 points
The residual oil left after distillation of gasoline and kerosene from crude
petroleum; yellow to brown oil, used as a diesel fuel and for enriching water gas.
Selected Answer: a.
Diesel oil
Answers: a.
Diesel oil
b.
Gas oil
c.
LPG
d.
Gasoline oil
• Question 8
0 out of 3.3 points
What is the residue left after combustion of a fossil fuel?
Selected Answer: a.
All of the choices
Answers: a.
All of the choices
b.
Scraper
c.
Ash
d.
Charcoal
• Question 9
0 out of 3.3 points
The fuel is injected into the cylinder in diesel engine when the piston is:
Selected Answer: [None Given]
Answers: a.
Approaching T.D.C during compression stroke
b.
Exactly at B.D.C after compression stroke
c.
Approaching B.D.C during exhaust stroke
d.
Exactky at T.D.C before compression stroke
• Question 10
0 out of 3.3 points
All of the following are thermodynamic properties except_____________.
Selected Answer: [None Given]
Answers: a.
modulus of elasticity
b.
temperature
c.
density
d.
pressure
• Question 11
0 out of 3.3 points
The liquid – vapor equilibrium of Oxygen is at what temperature?
Selected Answer: [None Given]
Answers: a.
-182.97°C
b.
182.97°C
c.
-197.82°C
d.
197.82°C
• Question 12
0 out of 3.3 points
Which thermodynamic property best describes the molecular activity of a
substance?
Selected Answer: [None Given]
Answers: a.
Internal energy
b.
External energy
c.
Enthalpy
d.
Entropy
• Question 13
0 out of 3.3 points
The ignition coil acts as
Selected Answer: [None Given]
Answers: a.
A capacitor
b.
An inductor
c.
A step up transformer
d.
An RC circuit
• Question 14
0 out of 3.3 points
What do you call theoretical body where absorptivity and emissivity are
independent of the wavelength over the spectral region of the irradiation and the
surface emission?
Selected Answer: [None Given]
Answers: a.
black body
b.
white body
c.
opaque body
d.
transparent body
• Question 15
0 out of 3.3 points
All processes below are irreversible except one. Which one?
Selected Answer: [None Given]
Answers: a.
Elastic tension and release of a steel bar
b.
Magnetization with hysteresis
c.
Heat conduction
d.
Inelastic deformation
• Question 16
0 out of 3.3 points
What do you call the changing of an atom of element into an atom of a different
element with a different atomic mass?
Selected Answer: [None Given]
Answers: a.
Atomization
b.
Atomic pile
c.
Atomic transmutation
d.
Atomic energy
• Question 17
0 out of 3.3 points
Which of the following is not a heat exchanger?
Selected Answer: [None Given]
Answers: a.
Boilers
b.
Water hammer
c.
Evaporators
d.
Condenser
• Question 18
0 out of 3.3 points
What is the pressure at the exit of a draft tube in turbine?
Selected Answer: [None Given]
Answers: a.
Atmospheric
b.
Vacuum
c.
Above atmospheric
d.
Below atmospheric
• Question 19
0 out of 3.3 points
What refers to the heat transfer wherein the heat is transferred from one point to
another by actual movement of substance?
Selected Answer: [None Given]
Answers: a.
Conduction
b.
Radiation
c.
Convection
d.
Absorption
• Question 20
0 out of 3.3 points
An instrument commonly used in most research and engineering laboratories
because it is small and fast among the other thermometers.
Selected Answer: [None Given]
Answers: a.
Liquid-in-glass thermometer
b.
Gas thermometer
c.
Thermocouple
d.
Mercury thermometer
• Question 21
0 out of 3.3 points
If the actual kinetic energy of a nozzle is Ka and Ki is the maximum valve that
can be attained by an isentropic expansion from an initial to final state, then the
efficiency of the nozzle is:
Selected Answer: [None Given]
Answers: a.
Ki/Ka
b.
(Ka – Ki) / Ka
c.
Ka/Ki
d.
(Ka – Ki) / Ki
• Question 22
0 out of 3.3 points
Which of the following state(s) is/are necessary for a system to be in
thermodynamic equilibrium.
Selected Answer: [None Given]
Answers: a.
Thermal equilibrium
b.
Chemical equilibrium
c.
Chemical, mechanical, and thermal equilibrium
d.
Mechanical equilibrium
• Question 23
0 out of 3.3 points
A hot block is cooled by blowing cool air over its top surface. The heat that is
first transferred to the air layer close to the block is by conduction. It is
eventually carried away from the surface by ______.
Selected Answer: [None Given]
Answers: a.
Convection
b.
Thermal radiation
c.
Radiation
d.
Conduction
• Question 24
0 out of 3.3 points
The pressure measured from the level of atmospheric pressure by most pressure
recording instrument like pressure gage and open – ended manometer.
Selected Answer: [None Given]
Answers: a.
gage pressure
b.
atmospheric pressure
c.
barometric pressure
d.
vacuum pressure
• Question 25
0 out of 3.3 points
Average pressure on a surface when a changing pressure condition exist
Selected Answer: [None Given]
Answers: a.
partial pressure
b.
pressure drop
c.
back pressure
d.
mean effective pressure
• Question 26
0 out of 3.3 points
What is the chemical formula of an aromatic type of hydrocarbon fuels?
Selected Answer: [None Given]
Answers: a.
CnH2n+2
b.
CnH2n-2
c.
CnH2n
d.
CnH2n-6
• Question 27
0 out of 3.3 points
At what temperature wherein an oil of any grade becomes cloudy and it freezes,
thus its application is limited
Selected Answer: [None Given]
Answers: a.
Flash point
b.
Freezing point
c.
Pour point
d.
Cold point
• Question 28
0 out of 3.3 points
At all wavelengths and temperatures the monochromatic emissivity of a white
body is equal to to:
Selected Answer: [None Given]
Answers: a.
0.1 - 0.5
b.
Zero
c.
0.5
d.
Unity
• Question 29
0 out of 3.3 points
The ideal cycle based on the concept that the combustion process is both diesel and
gasoline in the combination of heat transfer processes that is constant pressure
and constant volume.
Selected Answer: [None Given]
Answers: a.
Rankine cycle
b.
Dual cycle
c.
Brayton cycle
d.
Ericsson cycle
• Question 30
0 out of 3.3 points
Which of the following chemical reactions in which heat is absorbed?
Selected Answer: [None Given]
Answers: a.
Exothermic reaction
b.
Endothermic reaction
c.
Combustion reaction
d.
Heat reaction
• Question 1
0 out of 3.3 points
What do you call theoretical body where absorptivity and emissivity are
independent of the wavelength over the spectral region of the irradiation and the
surface emission?
Selected Answer: a.
opaque body
Answers: a.
opaque body
b.
white body
c.
transparent body
d.
black body
• Question 2
3.3 out of 3.3 points
The thermal resistance for one-dimensional steady conduction heat transfer
through cylindrical wall in the radial direction is expresses in which of the
following functions?
Selected Answer: a.
logarithmic
Answers: a.
logarithmic
b.
linear
c.
exponential
d.
trigonometric
• Question 3
0 out of 3.3 points
Engine oil is generally changed after:
Selected Answer: a.
100 km
Answers: a.
100 km
b.
1500 km
c.
1100 km
d.
2500-6000 km
• Question 4
3.3 out of 3.3 points
The residual oil left after distillation of gasoline and kerosene from crude
petroleum; yellow to brown oil, used as a diesel fuel and for enriching water gas.
Selected Answer: a.
Gas oil
Answers: a.
Gas oil
b.
Diesel oil
c.
LPG
d.
Gasoline oil
• Question 5
0 out of 3.3 points
Which of the following types of hydrocarbons have chemical formula of CnH2n-4?
Selected Answer: a.
Aromatics
Answers: a.
Aromatics
b.
Paraffins
c.
Diolefins
d.
Asphaltics
• Question 6
0 out of 3.3 points
The radiant heat transfer depends on:
Selected Answer: [None Given]
Answers: a.
Heat flow from cold to hot
b.
Heat rays
c.
Humidity
d.
Temperature
• Question 7
0 out of 3.3 points
The specific gravity of a substance is the ratio of its density to the density of:
Selected Answer: a.
mercury
Answers: a.
mercury
b.
water
c.
air
d.
gas
• Question 8
0 out of 3.3 points
The following are all characteristics of non-metals except:
Selected Answer: [None Given]
Answers: a.
Having little or no luster
b.
Appearing on the right end of the periodic table
c.
Having low ductility
d.
Being reducing agents
• Question 9
0 out of 3.3 points
The sum of the energies of all molecules in a system where energies appear in
several complex form
Selected Answer: [None Given]
Answers: a.
kinetic energy
b.
internal energy
c.
potential energy
d.
frictional energy
• Question 10
0 out of 3.3 points
A colorless, odorless mixture of nitrogen and oxygen with traces of other gases
water vapor and same impurities.
Selected Answer: [None Given]
Answers: a.
Water gas
b.
Air
c.
Helium
d.
Nitrite
• Question 11
0 out of 3.3 points
Which thermodynamic property best describes the molecular activity of a
substance?
Selected Answer: [None Given]
Answers: a.
Internal energy
b.
Enthalpy
c.
Entropy
d.
External energy
• Question 12
0 out of 3.3 points
What happens to the heat transferred radially across insulated pipe per unit
area?
Selected Answer: [None Given]
Answers: a.
Decrease from pipe wall to insulated surface
b.
Decrease with the increase in thermal
conductivity
c.
Partially increases from pipe wall to insulated
surface
d.
The heat will flow at constant rate
• Question 13
0 out of 3.3 points
Dirt or gum in fuel nozzle or jets can produce:
Selected Answer: [None Given]
Answers: a.
Smoky black exhaust
b.
White exhaust
c.
Lack of engine power
d.
Excessive fuel consumption
• Question 14
0 out of 3.3 points
When 1 mol carbon combines with 1 mol oxygen
Selected Answer: [None Given]
Answers: a.
2 mols carbon dioxide
b.
1 mol carbon dioxide
c.
1 mole carbon and 1 mol carbon dioxide
d.
1 mol carbon dioxide
• Question 15
0 out of 3.3 points
Which of the following is the most efficient thermodynamic cycle?
Selected Answer: [None Given]
Answers: a.
Pressure
b.
Carnot
c.
Otto
d.
Brayton
• Question 16
0 out of 3.3 points
The entropy of a fluid remains constant during what process?
Selected Answer: [None Given]
Answers: a.
unsteady stagnation process
b.
isentropic stagnation process
c.
polytropic stagnation process
d.
combustion process
• Question 17
0 out of 3.3 points
The Beattie-Bridgeman equation of state is quite accurate in cases of:
Selected Answer: [None Given]
Answers: a.
Near critical temperature
b.
Densities less than about 0.8 times the critical density
c.
None of the other choices
d.
All pressures above atmospheric pressure
• Question 18
0 out of 3.3 points
A steam nozzle changes
Selected Answer: [None Given]
Answers: a.
heat energy into potential energy
b.
kinetic energy into heat energy
c.
potential energy into heat energy
d.
heat energy into kinetic energy
• Question 19
0 out of 3.3 points
The diesel fuel pump is designed to supply fuel
Selected Answer: [None Given]
Answers: a.
In excess quantity than needed by the injection pump
b.
Just sufficient against the demand of the injection pump
c.
Insufficient quantity in accordance with the engine speed
d.
A constant quantity at all engine speeds
• Question 20
0 out of 3.3 points
Which of the following is the definition of joule
Selected Answer: [None Given]
Answers: a.
rate of change of energy
b.
kgm/s2
c.
newton meter
d.
unit of power
• Question 21
0 out of 3.3 points
Which of the following is the Stefan – Boltzmann constant?
Selected Answer: [None Given]
Answers: a.
5.67 x 10-8 W/m2K4
b.
4.78 x 10-10 W/m2K4
c.
5.77 x 10-7 W/m2K4
d.
7.67 x 10-9 W/m2K4
• Question 22
0 out of 3.3 points
A theorem that states that the total property of a mixture of ideal gases is the sum
of the properties that the individual gases would have if each occupied the total
mixture volume alone as the same temperature
Selected Answer: [None Given]
Answers: a.
Dalton’s theorem
b.
Maxwell theorem
c.
Boltzmann’s theorem
d.
Gibbs theorem
• Question 23
0 out of 3.3 points
Which of the following is not a heat exchanger?
Selected Answer: [None Given]
Answers: a.
Evaporators
b.
Condenser
c.
Boilers
d.
Water hammer
• Question 24
0 out of 3.3 points
In a closed system (with a moving boundary) which of the following represents
work done during an isothermal process?
Selected Answer: [None Given]
Answers: a.
W = P(V2 - V1)
b.
W = P1V1 ln (V2/V1)
c.
W=0
d.
W = (P2V2 - P1V1) / (1 – n)
• Question 25
0 out of 3.3 points
One of the reasons for insulating the pipes is:
Selected Answer: [None Given]
Answers: a.
There is minimum corrosion
b.
They may not break under pressure
c.
Capacity to withstand pressure is increased
d.
Heat loss from the surface is minimized
• Question 26
0 out of 3.3 points
The liquid – vapor equilibrium of Oxygen is at what temperature?
Selected Answer: [None Given]
Answers: a.
182.97°C
b.
-182.97°C
c.
-197.82°C
d.
197.82°C
• Question 27
0 out of 3.3 points
Heat normally flowing from a high temperature body to a low temperature body
wherein it is impossible to convert heat without other effect
Selected Answer: [None Given]
Answers: a.
first law of thermodynamics
b.
third law of thermodynamics
c.
second law of thermodynamics
d.
zeroth law of thermodynamics
• Question 28
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are negligible or
insignificant, the work input to an adiabatic compressor is___________.
Selected Answer: [None Given]
Answers: a.
Infinity
b.
Equal to change in enthalpy
c.
Zero
d.
Negligible
• Question 29
0 out of 3.3 points
A control volume refers to what?
Selected Answer: [None Given]
Answers: a.
a reversible process
b.
a fixed region in space
c.
a specified mass
d.
an isolated system
• Question 30
0 out of 3.3 points
What is the usual value of transmissivity for opaque materials?
A.0
Selected Answer: [None Given]
Answers: a.
Indeterminate
b.
Infinity
c.
1
• Question 1
0 out of 3.3 points
Heat normally flowing from a high temperature body to a low temperature body
wherein it is impossible to convert heat without other effect
Selected Answer: a.
third law of thermodynamics
Answers: a.
third law of thermodynamics
b.
zeroth law of thermodynamics
c.
first law of thermodynamics
d.
second law of thermodynamics
• Question 2
0 out of 3.3 points
The compressibility factor z, is used for predicting the behavior of non-ideal gases.
How is the compressibility factor defined relative to an ideal gas? (subscript c
refers to critical value)
Selected Answer: a.
Z = T/Tc
Answers: a.
Z = T/Tc
b.
Z = (T/Tc)(Pc/P)
c.
Z = P/Pc
d.
Z = PV/RT
• Question 3
0 out of 3.3 points
U + pV is a quantity called:
Selected Answer: a.
shaft work
Answers: a.
shaft work
b.
internal energy
c.
enthalpy
d.
entropy
• Question 4
0 out of 3.3 points
Wax is applied on card body as:
Selected Answer: a.
It is water repellent
Answers: a.
It is water repellent
b.
It seals off the pores
c.
The surface shines
d.
Ay of the other choices
• Question 5
0 out of 3.3 points
What condition exist in an adiabatic throttling process?
Selected Answer: a.
Entropy is constant
Answers: a.
Entropy is constant
b.
Specific volume is constant
c.
Enthalpy is constant
d.
Enthalpy is variable
• Question 6
3.3 out of 3.3 points
What keeps the moisture from passing through the system?
Selected Answer: a.
Dehydrator
Answers: a.
Dehydrator
b.
Aerator
c.
Humidifier
d.
Trap
• Question 7
0 out of 3.3 points
According to Clausius statement
Selected a.
Answer: Heat cannot flow from cold substance to hot substance
Answers: a.
Heat cannot flow from cold substance to hot substance
b.
A and C
c.
Heat can flow from cold substance to substance with the aid of
external work
d.
Heat flow from hot surface to cold surface unaided
• Question 8
3.3 out of 3.3 points
Exhaust gases from an engine posses:
Selected Answer: a.
kinetic energy
Answers: a.
kinetic energy
b.
stored energy
c.
chemical energy
d.
solar energy
• Question 9
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: [None Given]
Answers: a.
Increasing temperature
b.
Decreasing temperature
c.
Increasing and decreasing temperature
d.
Constant temperature
• Question 10
0 out of 3.3 points
The Carnot refrigeration cycle includes all of the following processes except:
Selected Answer: [None Given]
Answers: a.
Isentropic expansion
b.
Isentropic compression
c.
Isothermal heating
d.
Isenthalpic expansion
• Question 11
0 out of 3.3 points
The true pressure measured above a perfect vacuum is:
Selected Answer: [None Given]
Answers: a.
Absolute pressure
b.
Gauge pressure
c.
Atmospheric pressure
d.
Vacuum pressure
• Question 12
0 out of 3.3 points
The temperature at which lubricating will form a cloud.
Selected Answer: [None Given]
Answers: a.
Critical point
b.
Pour point
c.
Boiling point
d.
Cloud point
• Question 13
0 out of 3.3 points
The nature of flow of a fluid inside a tube, whether it is turbulent or laminar, can
be ascertained by:
Selected Answer: [None Given]
Answers: a.
Surface conditions
b.
Reynolds number
c.
Flow velocity
d.
Viscosity of the fluid
• Question 14
0 out of 3.3 points
The mean effective pressure of a diesel cycle having fixed compression ratio will
increase if cut off is:
Selected Answer: [None Given]
Answers: a.
Independent of compression ratio
b.
Decreased
c.
Increased
d.
Depends on other factor
• Question 15
0 out of 3.3 points
Which of the following gives polytropic under n?
Selected Answer: [None Given]
Answers: a.
log (P1/P2) / log (V1/V2)
b.
log (P2/P1) / log (V1/V2)
c.
log (V1/V2) / log (P1/P2)
d.
log (V1/V2) / log (P2/P1)
• Question 16
0 out of 3.3 points
The solid – liquid equilibrium of Silver is at what temperature?
Selected Answer: [None Given]
Answers: a.
1063°C
b.
960.8°C
c.
630.5°C
d.
1774°C
• Question 17
0 out of 3.3 points
According to Pettlier Thompson effect:
Selected [None Given]
Answer:
Answers: a.
Work can’t be converted into heat
b.
It is impossible to construct a heat engine that operates in a cycle and
receives a give quantity of heat from a high temperature body and
does an equal amount of work
c.
When two dissimilar metals are heated at one end and cooled at other,
emf that is developed is proportional to difference of temperatures at
two ends
d.
It is impossible to construct a device that operates in a cycle and
produces no effect other than the transfer of heat form a cooler body
to a hotter body.
• Question 18
0 out of 3.3 points
Which of the following property of liquid extend resistance to angular or shear
deformation:
Selected Answer: [None Given]
Answers: a.
Specific weight
b.
Viscosity
c.
Specific gravity
d.
Density
• Question 19
0 out of 3.3 points
One could expect the possibility of Reynolds number similarity in all of the ff cases except:
b.
Carnot efficiency
c.
Process irreversibility
d.
Availability
• Question 21
0 out of 3.3 points
Another name for liquid valve is:
Selected Answer: [None Given]
Answers: a.
Shut-off valve
b.
Master valve
c.
Freon valve
d.
King valve
• Question 22
0 out of 3.3 points
The relationship between the concentration of products and reactants in a
reversible chemical reaction given by
Selected Answer: [None Given]
Answers: a.
The solubility product
b.
The ionization constant
c.
Le chatelier’s principle
d.
The equilibrium constant
• Question 23
0 out of 3.3 points
The pressure measured above a perfect vacuum.
Selected Answer: [None Given]
Answers: a.
vacuum pressure
b.
atmospheric pressure
c.
gage pressure
d.
absolute pressure
• Question 24
0 out of 3.3 points
The temperature potential between temperature at the two ends of a heat
exchanger are given by:
Selected Answer: [None Given]
Answers: a.
Kirchoff’s law
b.
The Stefan-Boltzmann Law
c.
The logarithmic mean temperature difference
d.
Fourier’s Law
• Question 25
0 out of 3.3 points
A theoretical gas which strictly follows boyle’s law and Charles law of gasses.
Selected Answer: [None Given]
Answers: a.
universal gas
b.
imperfect gas
c.
combined gas
d.
perfect gas
• Question 26
0 out of 3.3 points
A body that is hot compared to its surroundings illuminates more energy that it
receives, while it surrounding absorbs more energy than they give. The heat
transferred from one to another by energy wave motion. What is this mode of
heat transfer?
Selected Answer: [None Given]
Answers: a.
conduction
b.
convection
c.
Radiation
d.
condensation
• Question 27
0 out of 3.3 points
A body whose emissivity is less than 1 is known as a real body. What is the
other term for real body?
Selected Answer: [None Given]
Answers: a.
White body
b.
Gray body
c.
Theoretical body
d.
Black body
• Question 28
0 out of 3.3 points
The type of filter where the filtering elements is replaceable
Selected Answer: [None Given]
Answers: a.
Pressure filter
b.
Filer with element
c.
Paper edge filter
d.
Metal edge filter
• Question 29
0 out of 3.3 points
What is referred by control volume?
Selected Answer: [None Given]
Answers: a.
fixed region in space
b.
reversible process only
c.
an isolated system
d.
closed system
• Question 30
0 out of 3.3 points
The Bureau of Standard uses, among others, liquid – vapor equilibrium of Nitrogen
at.
Selected Answer: [None Given]
Answers: a.
-196°C
b.
-253°C
c.
196°C
d.
253°C
• Question 1
0 out of 3.3 points
The law that state “Entropy of all perfect crystalline solid is zero at absolute zero
temperature”:
Selected Answer: a.
First law of thermodynamics
Answers: a.
First law of thermodynamics
b.
Second law of thermodynamics
c.
Third law of thermodynamics
d.
Zeroth law of thermodynamics
• Question 2
0 out of 3.3 points
A control volume refers to what?
Selected Answer: a.
a reversible process
Answers: a.
a reversible process
b.
an isolated system
c.
a fixed region in space
d.
a specified mass
• Question 3
3.3 out of 3.3 points
A process which gives the same states/conditions after the system undergoes a
series of process:
Selected Answer: a.
cyclic process
Answers: a.
cyclic process
b.
irreversible process
c.
quasi-static process
d.
reversible process
• Question 4
3.3 out of 3.3 points
On what plane is the Mollier diagram plotted
Selected Answer: a.
h-s
Answers: a.
h-s
b.
p-T
c.
p-V
d.
h-u
• Question 5
0 out of 3.3 points
Dritus Boelter equation can be applied in case of fluids flowing in:
Selected Answer: a.
Any of the other choices
Answers: a.
Any of the other choices
b.
Laminar region
c.
Transition region
d.
Turbulent region
• Question 6
0 out of 3.3 points
Flow measuring devices include all of the ff except:
Selected Answer: [None Given]
Answers: a.
Venturi meters
b.
Turbine and propeller meters
c.
Magnetic dynamometers
d.
Static pressure probes
• Question 7
0 out of 3.3 points
The convergent section of a nozzle increases the velocity of the flow of the gas.
What does it to do on its pressure?
Selected Answer: [None Given]
Answers: a.
It increases the pressure
b.
It decreases the pressure
c.
Pressure equal the velocity
d.
Pressure become constant
• Question 8
0 out of 3.3 points
In a closed system (with a moving boundary) which of the following represents
work done during an isothermal process?
Selected Answer: [None Given]
Answers: a.
W = (P2V2 - P1V1) / (1 – n)
b.
W=0
c.
W = P(V2 - V1)
d.
W = P1V1 ln (V2/V1)
• Question 9
0 out of 3.3 points
Which of the following relations is not applicable in a free expansion process?
Selected Answer: [None Given]
Answers: a.
Change in temperature is zero
b.
Heat supplied is zero
c.
Work done is zero
d.
Heat rejected is zero
• Question 10
0 out of 3.3 points
Another name for liquid valve is:
Selected Answer: [None Given]
Answers: a.
Freon valve
b.
Shut-off valve
c.
Master valve
d.
King valve
• Question 11
0 out of 3.3 points
What kind of bonding do common gases that exist in a free state as diatomic
molecules experience?
Selected Answer: [None Given]
Answers: a.
Metallic bonds
b.
Nuclear bonds
c.
Covalent bonds
d.
Ionic bonds
• Question 12
0 out of 3.3 points
Dry air can be approximated as __% oxygen and __% nitrogen by mole numbers.
Selected Answer: [None Given]
Answers: a.
30% and 70%
b.
79% and 21%
c.
21% and 79%
d.
70% and 30%
• Question 13
0 out of 3.3 points
What refers to the heat transfer wherein the heat is transferred from one point to
another by actual movement of substance?
Selected Answer: [None Given]
Answers: a.
Absorption
b.
Convection
c.
Radiation
d.
Conduction
• Question 14
0 out of 3.3 points
In the cam, the distance between the base circle and the nose is known as
Selected Answer: [None Given]
Answers: a.
Lift
b.
Lobe
c.
Flank
d.
Nose
• Question 15
0 out of 3.3 points
Morse test is conducted on :
Selected Answer: [None Given]
Answers: a.
Multi-cylinder engines
b.
Vertical engines
c.
Horizontal engines
d.
Single – cylinder engines
• Question 16
0 out of 3.3 points
Speedometer drive is generally taken from:
Selected Answer: [None Given]
Answers: a.
Front wheel
b.
Fan belt
c.
Dynamo
d.
Flywheel
• Question 17
0 out of 3.3 points
In the polytropic process, PV=constant, if the value of n is infinitely large, the
process is
Selected Answer: [None Given]
Answers: a.
isometric
b.
Isobaric
c.
polytropic
d.
isothermal
• Question 18
0 out of 3.3 points
The self starting motor for automobiles is a:
Selected Answer: [None Given]
Answers: a.
Universal motor
b.
Dc shunt motor
c.
Synchronous motor
d.
Dc series motor
• Question 19
0 out of 3.3 points
Which of the engine is used for fighter bomber?
Selected Answer: [None Given]
Answers: a.
ramjet
b.
turbojet
c.
rockets
d.
pulsejet
• Question 20
0 out of 3.3 points
The liquid – vapor equilibrium of Oxygen is at what temperature?
Selected Answer: [None Given]
Answers: a.
-197.82°C
b.
197.82°C
c.
-182.97°C
d.
182.97°C
• Question 21
0 out of 3.3 points
The latent heat of vaporization on joules per kg is equal to
Selected Answer: [None Given]
Answers: a.
3.35 x 105
b.
4.13 x 103
c.
5.4 x 102
d.
22.6 x 105
• Question 22
0 out of 3.3 points
What is the expression for heat of vaporization?
Selected Answer: [None Given]
Answers: a.
hf
b.
hf - hg
c.
hg - hf
d.
hg
• Question 23
0 out of 3.3 points
Gauge pressure and absolute pressure differ from each other by:
Selected Answer: [None Given]
Answers: a.
Nothing they mean the same thing
b.
The size of the gauge
c.
Atmospheric pressure
d.
The system units
• Question 24
0 out of 3.3 points
In parallel pipe system originating and terminating in common junctions,
Selected Answer: [None Given]
Answers: a.
Lengths of each branch are equal
b.
Mass flows through each branch are equal
c.
Pressure drops through each branch are equal
d.
Flow areas of each branch are equal
• Question 25
0 out of 3.3 points
The energy of a body that can be transmitted in the form of heat.
Selected Answer: [None Given]
Answers: a.
Entropy
b.
Heat energy
c.
Internal energy
d.
Thermal energy
• Question 26
0 out of 3.3 points
Dirt or gum in fuel nozzle or jets can produce:
Selected Answer: [None Given]
Answers: a.
Excessive fuel consumption
b.
Lack of engine power
c.
Smoky black exhaust
d.
White exhaust
• Question 27
0 out of 3.3 points
Absolute temperature on the Fahrenheit scale are called:
Selected Answer: [None Given]
Answers: a.
Absolute Celsius
b.
Degrees Rankine
c.
Degrees Kelvin
d.
Absolute Fahrenheit
• Question 28
0 out of 3.3 points
The absolute zero on the Celsius scale is at
Selected Answer: [None Given]
Answers: a.
459.7 degree F
b.
-459.7 degree F
c.
-273.15 degree C
d.
273.15 degree C
• Question 29
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: [None Given]
Answers: a.
Constant temperature
b.
Increasing temperature
c.
Increasing and decreasing temperature
d.
Decreasing temperature
• Question 30
0 out of 3.3 points
In the absence of any irreversibilities, a thermoelectric generator, a device that
incorporates both thermal and electric effects, will have the efficiency of a/an
Selected Answer: [None Given]
Answers: a.
Diesel cycle
b.
Otto cycle
c.
Carnot cycle
d.
Rankine cycle
• Question 1
0 out of 3.3 points
Mechanism design to lower the temperature of air passing through it
Selected Answer: a.
air defense
Answers: a.
air defense
b.
air cooler
c.
air cycle
d.
air spill over
• Question 2
0 out of 3.3 points
Why are metals good conductors of heat?
Selected Answer: a.
Because they have reflecting surfaces
Answers: a.
Because they have reflecting surfaces
b.
Because their atoms are relatively far apart
c.
Because their atoms collide infrequently
d.
Because they contain free electrons
• Question 3
0 out of 3.3 points
A pneumatic tool is generally powered by
Selected Answer: a.
Electricity
Answers: a.
Electricity
b.
Air
c.
Water
d.
Steam
• Question 4
0 out of 3.3 points
Cryogenic temperature ranges from:
Selected Answer: a.
-100F to -300F
Answers: a.
-100F to -300F
b.
-150F to -359F
c.
-200F to -400F
d.
-250F to -459F
• Question 5
0 out of 3.3 points
To measure the clearance between the valve and tappet of an automobile engine
we use a
Selected Answer: a.
Slip gauge
Answers: a.
Slip gauge
b.
Vernier scale
c.
Pneumatic gauge
d.
Feeler gauge
• Question 6
0 out of 3.3 points
What is the true about the polytropic exponent n for a perfect gas undergoing an
isobaric process?
Selected Answer: a.
n=8
Answers: a.
n=8
b.
n >0
c.
n=0
d.
n<0
• Question 7
0 out of 3.3 points
A temperature above which a given gas cannot be liquefied:
Selected Answer: [None Given]
Answers: a.
Cryogenic temperature
b.
Vaporization temperature
c.
Absolute temperature
d.
Critical temperature
• Question 8
0 out of 3.3 points
An impulse turbine are used for:
Selected Answer: [None Given]
Answers: a.
High head
b.
Very low head
c.
Medium head
d.
Low head
• Question 9
0 out of 3.3 points
Which of the ff is not a similarity between submerged culvert and a siphon?
Selected Answer: [None Given]
Answers: a.
They both operate full
b.
Torricelli’s equation holds
c.
Both can experience entrance and exit losses
d.
In both, the water flows downhill
• Question 10
0 out of 3.3 points
The pressure obtained from barometric pressure reading.
Selected Answer: [None Given]
Answers: a.
absolute pressure
b.
atmospheric pressure
c.
vacuum pressure
d.
gage pressure
• Question 11
0 out of 3.3 points
Which of the following is the basis for Bernoulli’s law for fluid flow?
Selected Answer: [None Given]
Answers: a.
the principle of conservation of mass
b.
fourier’s law
c.
the principle of conservation of energy
d.
the continuity equation
• Question 12
0 out of 3.3 points
What is the apparatus used in the analysis of combustible gases?
Selected Answer: [None Given]
Answers: a.
Calorimeter
b.
Calorimeter gas
c.
Calorimetry
d.
Calorimeter differential
• Question 13
0 out of 3.3 points
An electrically charged atom or radical carries electricity through an electrolyte
is called:
Selected Answer: [None Given]
Answers: a.
Isotope
b.
Ion
c.
Molecule
d.
Hole
• Question 14
0 out of 3.3 points
Detonation of pinging noise is due to :
Selected Answer: [None Given]
Answers: a.
Valve springs weak or broken
b.
Early timing of fuel injection
c.
Head of piston carbonized
d.
Late timing of fuel injection
• Question 15
0 out of 3.3 points
A system in which there is no exchange of matter with the surrounding or mass
does not cross its boundaries
Selected Answer: [None Given]
Answers: a.
open system
b.
isolated system
c.
closed system
d.
nonflow system
• Question 16
0 out of 3.3 points
Loss power is due to:
Selected Answer: [None Given]
Answers: a.
Restricted exhaust
b.
Clogging of air cleaner
c.
Poor compression
d.
Low injection pressure
• Question 17
0 out of 3.3 points
The coefficient of discharge is the ratio of the:
Selected Answer: [None Given]
Answers: a.
Area of vena contracta to the orifice
b.
Effective head to the actual head
c.
Actual discharge to the theoretical discharge
d.
Actual velocity to the theoretical velocity
• Question 18
0 out of 3.3 points
The thermal conductivity does not depend on which of the following?
Selected Answer: [None Given]
Answers: a.
Physical state or texture
b.
Temperature and pressure
c.
Gravitational pull
d.
Chemical composition
• Question 19
0 out of 3.3 points
Which of the following best describe function of heat exchanger?
Selected Answer: [None Given]
Answers: a.
transfer heat from one fluid to another
b.
evaluate the total energy content of the flow
c.
exchange heat to increase energy to the flow
d.
increase the water temperature entering the
• Question 20
0 out of 3.3 points
The total energy in a compressible or incompressible fluid across any section in a
pipeline is a function of
Selected [None Given]
Answer:
Answers: a.
pressure, density, and velocity
b.
pressure and velocity
c.
flow energy, kinetic energy, height above datum and internal
energy
d.
pressure, density, velocity and viscosity
• Question 21
0 out of 3.3 points
The intake pipe to a hydraulic turbine from a dam is:
Selected Answer: [None Given]
Answers: a.
Tailrace
b.
Surge tank
c.
Spiral casing
d.
Penstock
• Question 22
0 out of 3.3 points
At atmospheric condition, hydrocarbon molecules with a low number of carbon
atoms, 1 to 4 are
Selected Answer: [None Given]
Answers: a.
Gases
b.
Atomic
c.
Light oils
d.
Liquids
• Question 23
0 out of 3.3 points
The king pin inclination is generally:
Selected Answer: [None Given]
Answers: a.
Less than 0.5
b.
More than 9
c.
Between 1 and 2
d.
Between 2 and 5
• Question 24
0 out of 3.3 points
According to Clausius statement
Selected [None Given]
Answer:
Answers: a.
Heat can flow from cold substance to substance with the aid of
external work
b.
Heat flow from hot surface to cold surface unaided
c.
A and C
d.
Heat cannot flow from cold substance to hot substance
• Question 25
0 out of 3.3 points
During an adiabatic, internally reversible process, what is true about the change in
entropy?
Selected Answer: [None Given]
Answers: a.
it is always zero
b.
it is always greater than zero
c.
it is always less than zero
d.
it is temperature-dependent
• Question 26
0 out of 3.3 points
Which of the following state(s) is/are necessary for a system to be in
thermodynamic equilibrium.
Selected Answer: [None Given]
Answers: a.
Chemical, mechanical, and thermal equilibrium
b.
Chemical equilibrium
c.
Thermal equilibrium
d.
Mechanical equilibrium
• Question 27
0 out of 3.3 points
Is one whose temperature is below the saturation temperature corresponding to
its pressure.
Selected Answer: [None Given]
Answers: a.
saturated liquid
b.
subcooled liquid
c.
superheated vapor
d.
wet vapor
• Question 28
0 out of 3.3 points
The internal combustion engines never work in
Selected Answer: [None Given]
Answers: a.
Otto cycle
b.
Rankine cycle
c.
Dual combustion cycle
d.
Diesel cycle
• Question 29
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are negligible or
insignificant, the work input to an adiabatic compressor is___________.
Selected Answer: [None Given]
Answers: a.
Equal to change in enthalpy
b.
Negligible
c.
Zero
d.
Infinity
• Question 30
0 out of 3.3 points
At what particular condition that no more heat can that be removed from a
substance and the temperature can no longer be lowered?
Selected Answer: [None Given]
Answers: a.
Critical point
b.
Absolute zero
c.
Freezing point
d.
Ground zero
• Question 1
0 out of 3.3 points
Which of the following gasses can be used to measure the lowest temperature?
Selected Answer: a.
Oxygen
Answers: a.
Oxygen
b.
Helium
c.
Hydrogen
d.
Nitrogen
• Question 2
0 out of 3.3 points
Diesel engine fuels are rated by:
Selected Answer: a.
Calorific value
Answers: a.
Calorific value
b.
Octane number
c.
Cetane number
d.
Specific gravity
• Question 3
0 out of 3.3 points
What usually happens to the surrounding when water vapor condenses?
Selected Answer: a.
It neither warm nor cold the surrounding
Answers: a.
It neither warm nor cold the surrounding
b.
It warms the surrounding
c.
The surrounding temperature decreases
d.
It neither warm nor cold the surrounding
• Question 4
3.3 out of 3.3 points
A hot block is cooled by blowing cool air over its top surface. The heat that is
first transferred to the air layer close to the block is by conduction. It is
eventually carried away from the surface by ______.
Selected Answer: a.
Convection
Answers: a.
Convection
b.
Conduction
c.
Thermal radiation
d.
Radiation
• Question 5
0 out of 3.3 points
If a substance temperature is less than its saturation temperature , the
substance is:
Selected Answer: a.
saturated vapor
Answers: a.
saturated vapor
b.
superheated vapor
c.
subcooled liquid
d.
wet vapor
• Question 6
3.3 out of 3.3 points
The centigrade scale was introduced by Anders Celsius in what year?
Selected Answer: a.
1740
Answers: a.
1740
b.
1542
c.
1720
d.
1730
• Question 7
0 out of 3.3 points
Brayton cycle has
Selected [None Given]
Answer:
Answers: a.
Two isothermal, one constant volume and one constant pressure
processes
b.
One constant pressure, one constant volume and two adiabatic
processes
c.
Two isentropic and two constant volume processes
d.
Two isentropic and two constant pressure processes
• Question 8
0 out of 3.3 points
The theory of changing heat into mechanical work.
Selected Answer: [None Given]
Answers: a.
kinetics
b.
thermodynamics
c.
inertia
d.
Kinematics
• Question 9
0 out of 3.3 points
The self starting motor for automobiles is a:
Selected Answer: [None Given]
Answers: a.
Dc series motor
b.
Synchronous motor
c.
Universal motor
d.
Dc shunt motor
• Question 10
0 out of 3.3 points
The rate of radiant energy, that is emitted by a surface at any temperature and
in small wavelengths is found from the known rate of energy, that under the
same conditions will be emitted from a black surface, by multiplying with the
absorptivity. The above enunciation is called:
Selected Answer: [None Given]
Answers: a.
Planck’s law
b.
Kirchhoff’s law
c.
Lambert’s law
d.
Stefan Boltzmann’s law
• Question 11
0 out of 3.3 points
Which of the following is the equivalent heat transferred of a gas undergoing
isometric process?
Selected Answer: [None Given]
Answers: a.
change in entropy
b.
change in internal energy
c.
change in enthalpy
d.
work nonflow
• Question 12
0 out of 3.3 points
For the same heat input and same compression ratio:
Selected Answer: [None Given]
Answers: a.
Efficiency depends mainly on the working substance
b.
Otto cycle is less efficient than diesel cycle
c.
None of the other choices is correct
d.
Both otto cycle and diesel cycle are equally efficient
• Question 13
0 out of 3.3 points
The indicator used to determine the anti-knock characteristics of gasoline
Selected Answer: [None Given]
Answers: a.
Octane number
b.
Aniline point
c.
Diesel index
d.
Cetane number
• Question 14
0 out of 3.3 points
Which of the following chemical reactions in which heat is absorbed?
Selected Answer: [None Given]
Answers: a.
Heat reaction
b.
Exothermic reaction
c.
Combustion reaction
d.
Endothermic reaction
• Question 15
0 out of 3.3 points
Engines using heavy fuels require heating of the fuel so that the viscosity at the
injector is:
Selected Answer: [None Given]
Answers: a.
Around 200 SSU
b.
100 SSU or less
c.
200 SSU + 50
d.
150 SSU or slightly higher
• Question 16
0 out of 3.3 points
A theorem that states that the total property of a mixture of ideal gases is the sum
of the properties that the individual gases would have if each occupied the total
mixture volume alone as the same temperature
Selected Answer: [None Given]
Answers: a.
Boltzmann’s theorem
b.
Gibbs theorem
c.
Maxwell theorem
d.
Dalton’s theorem
• Question 17
0 out of 3.3 points
Non-isotropic conductivity is shown by which of the following?
Selected Answer: [None Given]
Answers: a.
Wood
b.
Brass
c.
Steel
d.
Copper
• Question 18
0 out of 3.3 points
The minimum cranking speed in petrol engine is:
Selected Answer: [None Given]
Answers: a.
One fourth of operating speed
b.
Half of the operating speed
c.
Same as the normal operating speed
d.
60-80 rpm
• Question 19
0 out of 3.3 points
Which of the following does not belong to the group?
Selected Answer: [None Given]
Answers: a.
Mechanical injection system
b.
Air injection system
c.
Time injection system
d.
Gas admission system
• Question 20
0 out of 3.3 points
How many independent properties are required to completely fix the equilibrium
state of a pure gaseous compound
Selected Answer: [None Given]
Answers: a.
2
b.
4
c.
1
d.
3
• Question 21
0 out of 3.3 points
The radiation from flames is having
Selected [None Given]
Answer:
Answers: a.
Infrared radiation from water vapor and carbon dioxide
b.
All of the other choices
c.
Radiation from suspended larger particles of coal, coke, or ash
contributing to flame luminosity
d.
Continuous radiation from burning soot particles of microscopic
and submicroscopic dimensions
• Question 22
0 out of 3.3 points
If any one or more properties of a system change, the system is said to have
undergone a ________.
Selected Answer: [None Given]
Answers: a.
cycle
b.
flow
c.
process
d.
control
• Question 23
0 out of 3.3 points
The tendency of a pure compound to be composed of the same elements combined
in a definite proportion by mass
Selected Answer: [None Given]
Answers: a.
Avogadro’s law
b.
Le chatelier’s principle
c.
Boyle’s law
d.
The law of definite proportions
• Question 24
0 out of 3.3 points
The region outside the boundary or the space and matter external to a system:
Selected Answer: [None Given]
Answers: a.
Ex- system
b.
Matter
c.
surrounding
d.
Extension
• Question 25
0 out of 3.3 points
Most commercially available petroleum lubricating oil deteriorates staring from
operating temperature of:
Selected Answer: [None Given]
Answers: a.
150 F
b.
250 F
c.
300 F
d.
200 F
• Question 26
0 out of 3.3 points
In parallel pipe system originating and terminating in common junctions,
Selected Answer: [None Given]
Answers: a.
Flow areas of each branch are equal
b.
Mass flows through each branch are equal
c.
Pressure drops through each branch are equal
d.
Lengths of each branch are equal
• Question 27
0 out of 3.3 points
The law which states that “ the ratio of the emissive powers to absorptivities are
equal when the two bodies are in thermal equilibrium” is known as:
Selected Answer: [None Given]
Answers: a.
Stefan-Boltzman law
b.
Newton’s law of convection
c.
Fourier’s law
d.
Kirchoff’s law of radiation
• Question 28
0 out of 3.3 points
Expansion factors take into account the:
Selected Answer: [None Given]
Answers: a.
Area of the vena contracta
b.
Effects of compressibility
c.
Small effect of friction and turbulence of the orifice
d.
Changes in diameters of converging pipe
• Question 29
0 out of 3.3 points
The number of protons in the nucleus of an atom or the number of electrons in the
orbit of an atom
Selected Answer: [None Given]
Answers: a.
atomic volume
b.
atomic number
c.
atomic mass
d.
atomic weight
• Question 30
0 out of 3.3 points
In natural convection a heated portion of a fluids moves because:
Selected Answer: [None Given]
Answers: a.
Of molecular collisions within it
b.
Of currents in the surrounding fluid
c.
Its density is less than that of the surrounding fluid
d.
Its molecules motions become aligned
• Question 1
0 out of 3.3 points
A finely divided carbon deposit by the smoke or flame is called
Selected Answer: d.
Fly ash
Answers: a.
Residue
b.
All of the choices
c.
Soot
d.
Fly ash
• Question 2
0 out of 3.3 points
What do you call a change of phase directly from vapor to solid without passing
through the liquid state?
Selected Answer: a.
Vaporization
Answers: a.
Vaporization
b.
Sublimation
c.
Solidification
d.
Deposition
• Question 3
3.3 out of 3.3 points
How do you treat a statement that is considered scientific law?
Selected Answer: a.
Accept as a summary of experimental observation
Answers: a.
Accept as a summary of experimental observation
b.
Believe to be derived from mathematical theorem
c.
We generally observed to be true
d.
We postulate to be true
• Question 4
0 out of 3.3 points
In any non quasi – static thermodynamic process, the overall entropy of an isolated
system will
Selected Answer: [None Given]
Answers: a.
increase only
b.
decrease and then increase
c.
decrease only
d.
increase and then decrease
• Question 5
0 out of 3.3 points
The minimum amount of air required for a complete combustion of fuel is called
Selected Answer: [None Given]
Answers: a.
Theoretical air
b.
Dry air
c.
Flue gas
d.
Excess air
• Question 6
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if the temperature is
extremely high?
Selected Answer: b.
Increases except for steel
Answers: a.
Almost constant except for ferromagnetic materials
b.
Increases except for steel
c.
Decreases except for ferrous metals
d.
Approaches infinity
• Question 7
0 out of 3.3 points
The fact that a fluid’s velocity increases as the cross-sectional area of the pipe
through which it flow decrease is due to:
Selected Answer: [None Given]
Answers: a.
The continuity equation
b.
The momentum equation
c.
The perfect gas law
d.
Bernoull’s equation
• Question 8
0 out of 3.3 points
Diesel engine fuels are rated by:
Selected Answer: [None Given]
Answers: a.
Cetane number
b.
Calorific value
c.
Octane number
d.
Specific gravity
• Question 9
0 out of 3.3 points
Common causes for excessive oil consumption
Selected Answer: [None Given]
Answers: a.
Frequent oil changes
b.
Short trips and cold weather
c.
High speed and worn engine
d.
Heavy oil and light bearings
• Question 10
0 out of 3.3 points
In an oxidation – reduction chemical reaction, all of the following occur except:
Selected Answer: [None Given]
Answers: a.
The exchange of electrons between elements
b.
Elements becoming more positive
c.
Elements becoming more negative
d.
Nuclear fusion
• Question 11
0 out of 3.3 points
What is the heat transfer due to density differential?
Selected Answer: [None Given]
Answers: a.
Convection
b.
Radiation
c.
Conduction
d.
Nuclear
• Question 12
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Bankl
b.
Hero
c.
Pelton
d.
Parson
• Question 13
0 out of 3.3 points
When a falling object reaches a speed at which the drag force equals its weight,
it has achieved:
Selected Answer: [None Given]
Answers: a.
Mach one
b.
A turbulent boundary layer
c.
A laminar boundary layer
d.
Terminal velocity
• Question 14
0 out of 3.3 points
In turbine installation, the air is removed from condenser by
Selected Answer: [None Given]
Answers: a.
Air pump
b.
Air injector
c.
Air jet
d.
Air ejector
• Question 15
0 out of 3.3 points
The absolute zero on the Fahrenheit scale is at
Selected Answer: [None Given]
Answers: a.
273.15 decree C
b.
-459.7 degree F
c.
-273.15 degree C
d.
459.7 degree F
• Question 16
0 out of 3.3 points
The lowest portion to storage basin from where the water is not drawn is:
Selected Answer: [None Given]
Answers: a.
Bottom storage
b.
Sub-soil storage
c.
Dead storage
d.
Spring reserve
• Question 17
0 out of 3.3 points
Least value of Prandt’l number can be expected in case of ____________.
Selected Answer: [None Given]
Answers: a.
Water
b.
Salt solution
c.
Sugar solution
d.
Liquid metals
• Question 18
0 out of 3.3 points
Which of the following requires the greatest amount of heat per kilogram for a
given increase in temperature?
Selected Answer: [None Given]
Answers: a.
Steam
b.
Water
c.
Copper
d.
Ice
• Question 19
0 out of 3.3 points
Which of the following relations defines enthalpy?
Selected Answer: [None Given]
Answers: a.
h = pV + T
b.
h = u + PV
c.
h = u+P/V
d.
h = u + p/t
• Question 20
0 out of 3.3 points
The condition as identified through the properties of the substance, generally
defined by particular values of any two independent properties.
Selected Answer: [None Given]
Answers: a.
State
b.
Point
c.
Flow
d.
Process
• Question 21
0 out of 3.3 points
The solid – liquid equilibrium of Tim is at what temperature?
Selected Answer: [None Given]
Answers: a.
231.9°C
b.
231.9°C
c.
- 38.87°C
d.
38.87°C
• Question 22
0 out of 3.3 points
The volume flow passes through a venturimeter is:
Selected Answer: [None Given]
Answers: a.
Decreasing
b.
Increasing
c.
Varying
d.
Constant
• Question 23
0 out of 3.3 points
Radiant heat transfer is described by :
Selected Answer: [None Given]
Answers: a.
The Logarithmic mean temperature
b.
Newton’s Law
c.
Kirchoff’s Law
d.
Fourier’s Law
• Question 24
0 out of 3.3 points
At critical point the latent enthalpy of vaporization is
Selected Answer: [None Given]
Answers: a.
minimum
b.
zero
c.
maximum
d.
a temperature dependent
• Question 25
0 out of 3.3 points
When the expansion or compression of gas takes place without transfer of heat
to or from the gas, the process is called:
Selected Answer: [None Given]
Answers: a.
Adiabatic process
b.
Isothermal process
c.
Isobaric process
d.
Isometric process
• Question 26
0 out of 3.3 points
Is one whose pressure is higher than saturation pressure corresponding to its
temperature
Selected Answer: [None Given]
Answers: a.
compressed liquid
b.
saturated vapor
c.
saturated liquid
d.
super heated vapor
• Question 27
0 out of 3.3 points
According to Clausius statement
Selected [None Given]
Answer:
Answers: a.
Heat cannot flow from cold substance to hot substance
b.
A and C
c.
Heat flow from hot surface to cold surface unaided
d.
Heat can flow from cold substance to substance with the aid of
external work
• Question 28
0 out of 3.3 points
At steam point, the temperature of water and its vapor at standard pressure are:
Selected Answer: [None Given]
Answers: a.
Undefined
b.
In equilibrium
c.
Extremes or maximum
d.
Unity
• Question 29
0 out of 3.3 points
Which of the following is the measure of the relative effectiveness of momentum
and energy transport by diffusion in the velocity and thermal boundary layer?
Selected Answer: [None Given]
Answers: a.
Prandtl number
b.
Reynold’s number
c.
Dimensional measurement
d.
Nusselt’s number
• Question 30
0 out of 3.3 points
The Clapeyron’s equation is applicable to:
Selected Answer: d.
1 system in equilibrium
Answers: a.
A change of state
b.
A change of state when water and water vapor are involved
c.
A change of state when two phases are in equilibrium
d.
1 system in equilibrium
• Question 1
3.3 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: b.
positive and negative pressure
Answers: a.
compound pressure
b.
positive and negative pressure
c.
complex pressure
d.
variable pressure
• Question 2
0 out of 3.3 points
The first and second laws of thermodynamics are:
Selected Answer: a.
Equations of state
Answers: a.
Equations of state
b.
Energy equations
c.
Momentum equations
d.
Continuity equations
• Question 3
0 out of 3.3 points
Which of the following best describe function of heat exchanger?
Selected Answer: c.
increase the water temperature entering the
Answers: a.
evaluate the total energy content of the flow
b.
exchange heat to increase energy to the flow
c.
increase the water temperature entering the
d.
transfer heat from one fluid to another
• Question 4
0 out of 3.3 points
What devices combines air and fuel for burning in cylinder?
Selected Answer: a.
Fuel injection
Answers: a.
Fuel injection
b.
Intercooler
c.
Regenerator
d.
Carburetor
• Question 5
0 out of 3.3 points
What happens to the thermal conductivity of diatomic gases if the temperature is
increase?
Selected Answer: b.
The thermal conductivity remains constant
Answers: a.
The thermal conductivity decreases
b.
The thermal conductivity remains constant
c.
The thermal conductivity partially increases then decreases
d.
The thermal conductivity will also increase
• Question 6
3.3 out of 3.3 points
High head turbine is a/an:
Selected Answer: c.
Impulse
Answers: a.
Francis
b.
Reaction
c.
Impulse
d.
Propeller
• Question 7
0 out of 3.3 points
All of the following processes are irreversible except:
Selected Answer: [None Given]
Answers: a.
heat conduction
b.
magnetization with hysteresis
c.
inelastic deformation
d.
elastic tension and release of a steel bar
• Question 8
0 out of 3.3 points
The specific gravity of a substance is the ratio of its density to the density of:
Selected Answer: [None Given]
Answers: a.
mercury
b.
gas
c.
air
d.
water
• Question 9
0 out of 3.3 points
The following are not included in the first law of thermodynamics for closed
system EXCEPT:
Selected Answer: [None Given]
Answers: a.
heat transferred in and out of the system
b.
internal energy
c.
work done by or on the system
d.
kinetic energy
• Question 10
0 out of 3.3 points
A Bell-Coleman cycle is a reversed:
Selected Answer: [None Given]
Answers: a.
Brayton cycle
b.
Joule cycle
c.
Carnot cycle
d.
Stirling cycle
• Question 11
0 out of 3.3 points
A pneumatic tool is generally powered by
Selected Answer: [None Given]
Answers: a.
Water
b.
Electricity
c.
Steam
d.
Air
• Question 12
0 out of 3.3 points
Specific heat capacity is an SI derive unit describe as:
Selected Answer: [None Given]
Answers: a.
W/m K
b.
J/kg K
c.
J/m3
d.
J/Kg
• Question 13
0 out of 3.3 points
When the expansion or compression of gas takes place without transfer of heat
to or from the gas, the process is called:
Selected Answer: [None Given]
Answers: a.
Isobaric process
b.
Adiabatic process
c.
Isometric process
d.
Isothermal process
• Question 14
0 out of 3.3 points
What is the SI unit of force
Selected Answer: [None Given]
Answers: a.
pound
b.
newton
c.
dyne
d.
kilogram
• Question 15
0 out of 3.3 points
ASTM coal classification is based on:
Selected Answer: [None Given]
Answers: a.
Orsat analysis
b.
Ultimate analysis
c.
None of the other choices
d.
Proximate analysis
• Question 16
0 out of 3.3 points
Average pressure on a surface when a changing pressure condition exist
Selected Answer: [None Given]
Answers: a.
Partial pressure
b.
Back pressure
c.
Pressure drop
d.
Mean effective pressure
• Question 17
0 out of 3.3 points
Which oil is more viscous?
Selected Answer: [None Given]
Answers: a.
SAE 30
b.
SAE 80
c.
SAE 50
d.
SAE 40
• Question 18
0 out of 3.3 points
During idling in compression ignition engine the air fuel ratio may be of the order
of:
Selected Answer: [None Given]
Answers: a.
30
b.
200
c.
150
d.
100
• Question 19
0 out of 3.3 points
The solid – liquid equilibrium of Platinum is at what temperature?
Selected Answer: [None Given]
Answers: a.
3037°C
b.
3073°C
c.
3370°C
d.
3730°C
• Question 20
0 out of 3.3 points
For which type of process does the equation dq = Tds hold
Selected Answer: [None Given]
Answers: a.
isobaric
b.
irreversible
c.
reversible
d.
isothermal
• Question 21
0 out of 3.3 points
Which of the following is mathematically a thermodynamic property?
Selected Answer: [None Given]
Answers: a.
Discontinuous
b.
A path function
c.
Exact differential
d.
A point function
• Question 22
0 out of 3.3 points
At critical point the latent enthalpy of vaporization is _______.
Selected Answer: [None Given]
Answers: a.
Zero
b.
Dependent on temperature
c.
Maximum
d.
Minimum
• Question 23
0 out of 3.3 points
The force of gravity on unit in volume is
Selected Answer: [None Given]
Answers: a.
Specific volume
b.
Specific gravity
c.
Specific weight
d.
Density
• Question 24
0 out of 3.3 points
When a certain mass of fluid in particular state passes through a series of process
and returns to its initial state, it undergoes a:
Selected Answer: [None Given]
Answers: a.
rotation
b.
process
c.
cycle
d.
revolution
• Question 25
0 out of 3.3 points
In pumped storage plant
Selected Answer: [None Given]
Answers: a.
Downstream water is pumped upstream during offload periods
b.
Water is stored by pumping to high pressures
c.
Pressure accumulators are used
d.
Power is produced by pumps
• Question 26
0 out of 3.3 points
Otto cycle consist of
Selected Answer: [None Given]
Answers: a.
Two adiabatic and two isothermal processes
b.
Two isothermal and two constant volume processes
c.
Two isentropic and two constant volume processes
d.
Two isentropic and two constant pressure processes
• Question 27
0 out of 3.3 points
What is the most efficient thermodynamics cycle?
Selected Answer: [None Given]
Answers: a.
Diesel
b.
Carnot
c.
Brayton
d.
Rankine
• Question 28
0 out of 3.3 points
The heat energy transferred to a substance at a constant pressure process is _______.
Selected Answer: [None Given]
Answers: a.
internal energy
b.
enthalpy
c.
entropy
d.
heat
• Question 29
0 out of 3.3 points
When the water in the products of combustion is in the vapor state, the heating
value is:
Selected Answer: [None Given]
Answers: a.
Average heating value
b.
Higher heating value
c.
Gross calorific value
d.
Lower heating value
• Question 30
0 out of 3.3 points
The Bureau of Standard uses, among others, the liquid – vapor equilibrium of
hydrogen at.
Selected Answer: [None Given]
Answers: a.
-196°C
b.
196°C
c.
253°C
d.
-253°C
• Question 1
3.3 out of 3.3 points
The matching model and full-scale prototype results a fluid dynamic phenomena
involving a fully submerged body requires equality of:
Selected Answer: c.
Reynolds number
Answers: a.
Cauchy number
b.
Weber number
c.
Reynolds number
d.
Froude number
• Question 2
0 out of 3.3 points
Speedometer drive is generally taken from:
Selected Answer: b.
Flywheel
Answers: a.
Front wheel
b.
Flywheel
c.
Dynamo
d.
Fan belt
• Question 3
0 out of 3.3 points
Solubility of a gas in a liquid at small concentration can be represented by which
law?
Selected Answer: b.
Clausius-Clapeyron’s equation
Answers: a.
Dalton’s law
b.
Clausius-Clapeyron’s equation
c.
Henry’s law
d.
Raoult’s law
• Question 4
3.3 out of 3.3 points
An impulse turbine are used for:
Selected Answer: a.
High head
Answers: a.
High head
b.
Medium head
c.
Very low head
d.
Low head
• Question 5
0 out of 3.3 points
Which of the following is the measure of the relative effectiveness of momentum
and energy transport by diffusion in the velocity and thermal boundary layer?
Selected Answer: a.
Dimensional measurement
Answers: a.
Dimensional measurement
b.
Prandtl number
c.
Nusselt’s number
d.
Reynold’s number
• Question 6
0 out of 3.3 points
Isentropic flow is
Selected Answer: b.
perfect gas law
Answers: a.
frictionless reversible flow
b.
perfect gas law
c.
reversible adiabatic flow
d.
ideal fluid flow
• Question 7
0 out of 3.3 points
The device that is used for reducing the exhaust noise is called
Selected Answer: [None Given]
Answers: a.
Muffler
b.
None of the other choices
c.
Exhaust manifold
d.
Exhaust pipe
• Question 8
0 out of 3.3 points
The first and second laws of thermodynamics are:
Selected Answer: [None Given]
Answers: a.
Energy equations
b.
Momentum equations
c.
Continuity equations
d.
Equations of state
• Question 9
0 out of 3.3 points
A water temperature of 18 F in the water cooled condenser is equivalent in C to
Selected Answer: [None Given]
Answers: a.
7.78
b.
10
c.
-9.44
d.
263.56
• Question 10
0 out of 3.3 points
The total entropy of a pure substance approaches zero as the absolute
thermodynamics temperature approaches zero.
Selected Answer: [None Given]
Answers: a.
third law of thermodynamics
b.
Zeroth law of thermodynamics
c.
second law of thermodynamics
d.
first law of thermodynamics
• Question 11
0 out of 3.3 points
Which of the following statements is no characteristic of ionic compounds?
Selected Answer: [None Given]
Answers: a.
They are good electrical conductors in the solid phase
b.
They are non-volatile and have low vapor pressures
c.
They are usually hard, brittle, crystalline solids
d.
They have high melting points
• Question 12
0 out of 3.3 points
What refers to the heat transfer wherein the heat is transferred from one point to
another by actual movement of substance?
Selected Answer: [None Given]
Answers: a.
Absorption
b.
Convection
c.
Radiation
d.
Conduction
• Question 13
0 out of 3.3 points
One watt is:
Selected Answer: [None Given]
Answers: a.
1kNm/s
b.
1Nm/ min
c.
1Nm/ hr
d.
1Nm/s
• Question 14
0 out of 3.3 points
The most probable cause for uneven wear of tires for a truck is:
Selected Answer: [None Given]
Answers: a.
Low tire pressure
b.
Any of the other choices
c.
Excessive camber
d.
Tires over loaded
• Question 15
0 out of 3.3 points
The instrument used to measure atmospheric pressure is:
Selected Answer: [None Given]
Answers: a.
Barometer
b.
Rotator
c.
Manometer
d.
Venturi
• Question 16
0 out of 3.3 points
In a hydro – electric plant using a Francis turbine with medium head, the speed can
be regulated using the
Selected Answer: [None Given]
Answers: a.
Weir
b.
Nozzle
c.
Deflector gate
d.
Wicket gate
• Question 17
0 out of 3.3 points
By supercharging:
Selected Answer: [None Given]
Answers: a.
Power stroke becomes stronger
b.
Thermal efficiency of the engine can be improved
c.
Engine can be made to run smoother
d.
Loss in exhaust gets reduced
• Question 18
0 out of 3.3 points
A gas produced by the combustion of fuel oil and cannot be found in the flue gases
is:
Selected Answer: [None Given]
Answers: a.
Oxygen
b.
Carbon dioxide
c.
Nitrogen
d.
Hydrogen
• Question 19
0 out of 3.3 points
The number of exhaust manifolds in a V-8 engine is:
Selected Answer: [None Given]
Answers: a.
Four
b.
There is no exhaust manifold
c.
Two
d.
One
• Question 20
0 out of 3.3 points
Which of the following is used in thermal power plant?
Selected Answer: [None Given]
Answers: a.
Brayton
b.
Reversed Carnot
c.
Otto
d.
Rankine
• Question 21
0 out of 3.3 points
Detonation of pinging noise is due to :
Selected Answer: [None Given]
Answers: a.
Valve springs weak or broken
b.
Head of piston carbonized
c.
Early timing of fuel injection
d.
Late timing of fuel injection
• Question 22
0 out of 3.3 points
If the composition of hydrocarbon fuel is known, the ration between the nitrogen
and oxygen that is supplied in air is:
Selected Answer: [None Given]
Answers: a.
Constant
b.
Equal
c.
Fixed
d.
Intensity
• Question 23
0 out of 3.3 points
The device that measures the temperature by the electromotive force.
Selected Answer: [None Given]
Answers: a.
electro-thermometer
b.
thermometer
c.
thermocouple
d.
thermoseebeck
• Question 24
0 out of 3.3 points
What is the chemical formula of an aromatic type of hydrocarbon fuels?
Selected Answer: [None Given]
Answers: a.
CnH2n+2
b.
CnH2n-6
c.
CnH2n
d.
CnH2n-2
• Question 25
0 out of 3.3 points
Which of the following conductivities where Sutherland equation is used?
Selected Answer: [None Given]
Answers: a.
Thermal conductivities of solids
b.
Thermal conductivities of liquids
c.
Thermal conductivities of metal
d.
Thermal conductivities of gasses
• Question 26
0 out of 3.3 points
One of the reasons for insulating the pipes is:
Selected Answer: [None Given]
Answers: a.
Capacity to withstand pressure is increased
b.
Heat loss from the surface is minimized
c.
They may not break under pressure
d.
There is minimum corrosion
• Question 27
0 out of 3.3 points
The thermal conductivity does not depend on which of the following?
Selected Answer: [None Given]
Answers: a.
Chemical composition
b.
Gravitational pull
c.
Temperature and pressure
d.
Physical state or texture
• Question 28
0 out of 3.3 points
Which of the following is the cause of loss power?
Selected Answer: [None Given]
Answers: a.
Poor compression
b.
Low injection pressure
c.
Restricted exhaust
d.
Clogging of air cleaner
• Question 29
0 out of 3.3 points
A laminated glass on cracking:
Selected Answer: [None Given]
Answers: a.
Bursts into granular pieces
b.
Sandwiched layer taps the fragments
c.
Breaks into the farm of crystals
d.
Bursts into sharp edged fragments
• Question 30
0 out of 3.3 points
Dew point is defined as
Selected [None Given]
Answer:
Answers: a.
The point where the pressure and temperature lines meet
b.
The temperature to which the air must be cooled at constant
pressure to produce saturation
c.
The pressure which dew is formed in the air.
d.
The temperature which dew is formed in the air
• Question 1
0 out of 3.3 points
Is a measure of the energy that is no longer available to perform useful work within
the current environment?
Selected Answer: a.
Molar value
Answers: a.
Molar value
b.
Fugacity
c.
Absolute enthalpy
d.
Absolute entropy
• Question 2
0 out of 3.3 points
What condition exist in an adiabatic throttling process?
Selected Answer: [None Given]
Answers: a.
Entropy is constant
b.
Enthalpy is constant
c.
Specific volume is constant
d.
Enthalpy is variable
• Question 3
0 out of 3.3 points
Which of the following is a characteristic of an impulse turbine?
Selected Answer: a.
No steam reaction to velocity
Answers: a.
No steam reaction to velocity
b.
Steam striking blades at zero angle
c.
Steam reversing direction
d.
Steam striking blades on angle
• Question 4
0 out of 3.3 points
The relationship between the total pressure of a mixture of non-reacting gases
and the partial pressures of constituents is given by:
Selected Answer: b.
volumetric fractions
Answers: a.
gravimetric fractions
b.
volumetric fractions
c.
Dalton’s law
d.
mole fractions
• Question 5
0 out of 3.3 points
Which of the following is used in thermal power plant?
Selected Answer: a.
Reversed Carnot
Answers: a.
Reversed Carnot
b.
Otto
c.
Brayton
d.
Rankine
• Question 6
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant energy that intrudes
on it and also emits the maximum possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Red hot body
b.
Black body
c.
Gray body
d.
White body
• Question 7
0 out of 3.3 points
The device that measure temperature by the electromotive force called
thermocouple was discovered by:
Selected Answer: [None Given]
Answers: a.
Fahrenheit
b.
Celcius
c.
Galileo
d.
Seebeck
• Question 8
0 out of 3.3 points
What are the immediate undesirable products from the petroleum based
lubricating oil when subjected to high pressure and temperature?
Selected Answer: [None Given]
Answers: a.
Sulfur
b.
Soots and ashes
c.
Carbon residue
d.
Gums, resins and acids
• Question 9
0 out of 3.3 points
Heat transfer due to density differential
Selected Answer: [None Given]
Answers: a.
Conduction
b.
Radiation
c.
Nuclear
d.
Convection
• Question 10
0 out of 3.3 points
Which is not correct for calculating air standard efficiency?
Selected Answer: [None Given]
Answers: a.
Gases dissociate at higher temperature
b.
No account of the mechanism of heat transfer is considered
c.
Specific heat remains unchanged at all temperatures
d.
All processes are reversible
• Question 11
0 out of 3.3 points
The minimum cranking speed in petrol engine is:
Selected Answer: [None Given]
Answers: a.
60-80 rpm
b.
One fourth of operating speed
c.
Half of the operating speed
d.
Same as the normal operating speed
• Question 12
0 out of 3.3 points
The device that is used to measure the clearance between the valve and tappet of
an internal combustion engine is measured by using:
Selected Answer: [None Given]
Answers: a.
Feeler gauge
b.
Snap gauge
c.
Slip gauge
d.
Micrometer
• Question 13
0 out of 3.3 points
A temperature above which a given gas cannot be liquefied:
Selected Answer: [None Given]
Answers: a.
Cryogenic temperature
b.
Critical temperature
c.
Absolute temperature
d.
Vaporization temperature
• Question 14
0 out of 3.3 points
Rare gases such as helium, argon, krypton, xenon and radon that are non-reactive
are called
Selected Answer: [None Given]
Answers: a.
Stop gases
b.
Non-reactants
c.
Residual gases
d.
Inert gases
• Question 15
0 out of 3.3 points
What is thermal diffusivity?
Selected Answer: [None Given]
Answers: a.
A dimensionless parameter
b.
A mathematical formula
c.
A configuration for heat conduction
d.
A physical property of the material
• Question 16
0 out of 3.3 points
The solid – liquid equilibrium of Tim is at what temperature?
Selected Answer: [None Given]
Answers: a.
231.9°C
b.
- 38.87°C
c.
231.9°C
d.
38.87°C
• Question 17
0 out of 3.3 points
In actual gases the molecular collisions are:
Selected Answer: [None Given]
Answers: a.
Elastic
b.
Plastic
c.
Inelastic
d.
Inplastic
• Question 18
0 out of 3.3 points
The force of gravity on unit in volume is
Selected Answer: [None Given]
Answers: a.
Density
b.
Specific volume
c.
Specific gravity
d.
Specific weight
• Question 19
0 out of 3.3 points
According to Prevost theory of heat exchange,
Selected [None Given]
Answer:
Answers: a.
It is impossible to transfer heat from low temperature source to
high temperature source.
b.
Heat transfer in most cases occurs by combination of conduction,
convection and radiation.
c.
All bodies above absolute zero emit radiation
d.
Heat transfer by radiation needs no medium.
• Question 20
0 out of 3.3 points
Starting motor current may be about
Selected Answer: [None Given]
Answers: a.
5.1 A
b.
0.15 A
c.
0.5 A
d.
25 A
• Question 21
0 out of 3.3 points
Ericsson cycle has
Selected [None Given]
Answer:
Answers: a.
Two isothermal and two constant volume processes
b.
Two adiabatic, one constant volume and constant pressure
process
c.
Two isothermal and two constant pressure processes
d.
Two isothermal and two constant entropy process
• Question 22
0 out of 3.3 points
Enthalpy of an ideal gas is a function only of
Selected Answer: [None Given]
Answers: a.
entropy
b.
pressure
c.
internal energy
d.
temperature
• Question 23
0 out of 3.3 points
The matching of scale model and full-scale results for a fluid dynamic
phenomena with a free surface requires equality of:
Selected Answer: [None Given]
Answers: a.
Cauchy number
b.
Reynolds number
c.
Weber number
d.
Froude number
• Question 24
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Napier constant
b.
Maxwell’s constant
c.
Boltzmann’z constant
d.
Joule’s constant
• Question 25
0 out of 3.3 points
Venturi meters, pitot static gauges, orifice meters, flow nozzles, and differential
manometers all depend upon the relationship between:
Selected Answer: [None Given]
Answers: a.
Pressure and mass flow
b.
Friction and pressure
c.
Flow velocity and friction
d.
Flow velocity and pressure
• Question 26
0 out of 3.3 points
All of the following are true of non-stoichiometric reactions except
Selected [None Given]
Answer:
Answers: a.
In combustion, air is often the excess reactant to assure complete
combustion of fuel
b.
Non-stoichiometric reactions are rare in the combustion process
c.
There is an excess of one or more reactants
d.
The percentage yields measures the efficiency of the reaction
• Question 27
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
Complex pressures
b.
Average pressures
c.
Variable pressures
d.
Positive and negative pressures
• Question 28
0 out of 3.3 points
The solid – liquid equilibrium of Platinum is at what temperature?
Selected Answer: a.
3037°C
Answers: a.
3037°C
b.
3073°C
c.
3370°C
d.
3730°C
• Question 29
0 out of 3.3 points
Common causes for excessive oil consumption
Selected Answer: b.
Short trips and cold weather
Answers: a.
Frequent oil changes
b.
Short trips and cold weather
c.
High speed and worn engine
d.
Heavy oil and light bearings
• Question 30
0 out of 3.3 points
Scavenging efficiency of a four stroke diesel engine is:
Selected Answer: b.
In the range 60-80 percent
Answers: a.
Below 60 percent
b.
In the range 60-80 percent
c.
Between 95% and 100 %
d.
In the range 80-95 percent
• Question 1
0 out of 3.3 points
A passive restraint device consisting of bags in front of the driver and passenger
Selected Answer: a.
Air duct
Answers: a.
Air duct
b.
Air buoy
c.
Air balloon
d.
Air bag
• Question 2
0 out of 3.3 points
The volume of fluid passing a cross-section of steam in unit time
Selected Answer: a.
steady flow
Answers: a.
steady flow
b.
continous flow
c.
discharge
d.
uniform flow
• Question 3
0 out of 3.3 points
Nozzle does not involve any work interaction. The fluid through this device
experiences:
Selected Answer: a.
No change in enthalpy
Answers: a.
No change in enthalpy
b.
No change in kinetic energy
c.
Vacuum
d.
No change in potential energy
• Question 4
0 out of 3.3 points
The diesel fuel pump is designed to supply fuel
Selected Answer: a.
In excess quantity than needed by the injection pump
Answers: a.
In excess quantity than needed by the injection pump
b.
Just sufficient against the demand of the injection pump
c.
Insufficient quantity in accordance with the engine speed
d.
A constant quantity at all engine speeds
• Question 5
0 out of 3.3 points
The latent heat of vaporization on joules per kg is equal to
Selected Answer: a.
5.4 x 102
Answers: a.
5.4 x 102
b.
3.35 x 105
c.
22.6 x 105
d.
4.13 x 103
• Question 6
3.3 out of 3.3 points
Average pressure on a surface when a changing pressure condition exist
Selected Answer: a.
Mean effective pressure
Answers: a.
Mean effective pressure
b.
Back pressure
c.
Partial pressure
d.
Pressure drop
• Question 7
0 out of 3.3 points
Which of the following is the driving force in heat transfer?
Selected Answer: [None Given]
Answers: a.
temperature gradient
b.
thickness gradient
c.
viscosity gradient
d.
dielectric gradient
• Question 8
0 out of 3.3 points
The absolute zero on the Fahrenheit scale is at
Selected Answer: [None Given]
Answers: a.
-273.15 degree C
b.
273.15 decree C
c.
-459.7 degree F
d.
459.7 degree F
• Question 9
0 out of 3.3 points
What kind of bonding do common gases that exist in free state as diatomic
molecules experiences?
Selected Answer: [None Given]
Answers: a.
Nuclear bonds
b.
Ionic bonds
c.
Covalent bonds
d.
Metallic bonds
• Question 10
0 out of 3.3 points
What is the value of the work done for a closed, reversible, isometric system?
Selected Answer: [None Given]
Answers: a.
indeterminate
b.
positive
c.
negative
d.
zero
• Question 11
0 out of 3.3 points
The function of a superheater is to:
Selected [None Given]
Answer:
Answers: a.
Exchange heat to increase energy of the flow
b.
Increase the water temperature entering the boiler and decrease
combustion requirements
c.
Transfer heat from one fluid to another
d.
Increase the total energy of the flow
• Question 12
0 out of 3.3 points
A system composed of ice and water at 0°C is said to be _______________.
Selected Answer: [None Given]
Answers: a.
a multiphase material
b.
all of the other choices
c.
in thermal equilibrium
d.
in thermodynamic equilibrium
• Question 13
0 out of 3.3 points
A constant pressure thermodynamic process obeys:
Selected Answer: [None Given]
Answers: a.
Boyle’s law
b.
Dalton’s law
c.
Charles’ law
d.
Amagat’s law
• Question 14
0 out of 3.3 points
The device that measures the temperature by the electromotive force.
Selected Answer: [None Given]
Answers: a.
thermocouple
b.
thermometer
c.
thermoseebeck
d.
electro-thermometer
• Question 15
0 out of 3.3 points
The sum of the energies of all molecules in a system where energies appear in
several complex form
Selected Answer: [None Given]
Answers: a.
frictional energy
b.
kinetic energy
c.
potential energy
d.
internal energy
• Question 16
0 out of 3.3 points
At what particular condition that no more heat can that be removed from a
substance and the temperature can no longer be lowered?
Selected Answer: [None Given]
Answers: a.
Ground zero
b.
Freezing point
c.
Critical point
d.
Absolute zero
• Question 17
0 out of 3.3 points
Hot spots
Selected Answer: [None Given]
Answers: a.
Do not exist in engines
b.
Are the defects in S.I in engines
c.
Are the hotter spots in engines
d.
Are the spots where heavier functions of fuel are vaporized
• Question 18
0 out of 3.3 points
In any non quasi – static thermodynamic process, the overall entropy of an isolated
system will
Selected Answer: [None Given]
Answers: a.
decrease only
b.
increase and then decrease
c.
increase only
d.
decrease and then increase
• Question 19
0 out of 3.3 points
The Beattie-Bridgeman equation of state is quite accurate in cases of:
Selected Answer: [None Given]
Answers: a.
All pressures above atmospheric pressure
b.
None of the other choices
c.
Densities less than about 0.8 times the critical density
d.
Near critical temperature
• Question 20
0 out of 3.3 points
Average pressure on a surface when a changing pressure condition exist
Selected Answer: [None Given]
Answers: a.
back pressure
b.
pressure drop
c.
mean effective pressure
d.
partial pressure
• Question 21
0 out of 3.3 points
Which of the following provides the basis for measuring thermodynamic property
of temperature?
Selected Answer: [None Given]
Answers: a.
first law of thermodynamics
b.
zeroth law of thermodynamics
c.
third law of thermodynamics
d.
second law of thermodynamics
• Question 22
0 out of 3.3 points
Which of the following heat exchange device used to provide heat transfer
between the exhaust gases and air prior to the entrance of a combustor?
Selected Answer: [None Given]
Answers: a.
economizer
b.
condenser
c.
regenerator
d.
reheater
• Question 23
0 out of 3.3 points
Flow measuring devices include all of the following except:
Selected Answer: [None Given]
Answers: a.
Pitot tubes
b.
Flow nozzles
c.
Precision tachometers
d.
Venture area meters
• Question 24
0 out of 3.3 points
The theory of changing heat into mechanical work.
Selected Answer: [None Given]
Answers: a.
inertia
b.
kinetics
c.
thermodynamics
d.
Kinematics
• Question 25
0 out of 3.3 points
In parallel pipe system originating and terminating in common junctions,
Selected Answer: [None Given]
Answers: a.
Mass flows through each branch are equal
b.
Lengths of each branch are equal
c.
Flow areas of each branch are equal
d.
Pressure drops through each branch are equal
• Question 26
0 out of 3.3 points
The solid – liquid equilibrium of Tungsten is at what temperature?
Selected Answer: [None Given]
Answers: a.
1774°C
b.
960.8°C
c.
630.5°C
d.
1063°C
• Question 27
0 out of 3.3 points
Steam at 2 kPa is saturated at 17.5C. In what state will the state be at 40c if the
pressure is 2 kPa?
Selected Answer: [None Given]
Answers: a.
Superheated
b.
Subcooled
c.
Supersaturated
d.
Saturated
• Question 28
0 out of 3.3 points
The process of splitting the nucleus into smaller fragments.
Selected Answer: [None Given]
Answers: a.
Fission
b.
Fusion
c.
The Compton effect
d.
The photo electric effect
• Question 29
0 out of 3.3 points
The region outside the boundary or the space and matter external to a system:
Selected Answer: [None Given]
Answers: a.
surrounding
b.
Ex- system
c.
Matter
d.
Extension
• Question 30
0 out of 3.3 points
In turbine installation, the air is removed from condenser by
Selected Answer: [None Given]
Answers: a.
Air jet
b.
Air pump
c.
Air ejector
d.
Air injector
• Question 1
0 out of 3.3 points
In regenerator type heat exchanger, heat transfer occurs by:
Selected Answer: a.
A complete separation between hot and cold fluids
Answers: a.
A complete separation between hot and cold fluids
b.
Generation of heat again and again
c.
Direct mixing of hot and cold fluids
d.
Cold and hot fluids alternately over a surface
• Question 2
0 out of 3.3 points
The thermal efficiency of a dual cycle engine with fixed compression ratio and fixed
quantity of heat and with increase in pressure ratio, will
Selected Answer: a.
Decrease
Answers: a.
Decrease
b.
Increase
c.
Depends on other factors
d.
Remain same
• Question 3
0 out of 3.3 points
What is the main power generating plant that produces the most electricity per
unit thermal energy in the fuel input and has the greatest surplus of electricity for
most cogeneration system?
Selected Answer: a.
Steam turbine
Answers: a.
Steam turbine
b.
Gas turbine
c.
Steam engine
d.
Diesel turbine
• Question 4
0 out of 3.3 points
The matching of scale and full-scale results for a fluid dynamic phenomena
involving compressible fluids requires equality of:
Selected Answer: a.
Froude number
Answers: a.
Froude number
b.
Cauchy number
c.
Mach number
d.
Reynolds number
• Question 5
0 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called _________.
Selected Answer: [None Given]
Answers: a.
Heat reservoir
b.
Cold reservoir
c.
Sink
d.
Source
• Question 6
0 out of 3.3 points
The ideal cycle based on the concept that the combustion process is both diesel and
gasoline in the combination of heat transfer processes that is constant pressure
and constant volume.
Selected Answer: [None Given]
Answers: a.
Dual cycle
b.
Ericsson cycle
c.
Rankine cycle
d.
Brayton cycle
• Question 7
0 out of 3.3 points
For glass wool thermal conductivity changes from sample to sample due
changes in:
Selected Answer: [None Given]
Answers: a.
Composition
b.
All of the other choices
c.
Density
d.
Structure
• Question 8
0 out of 3.3 points
Which of the following statements regarding rankine cycle is not true?
Selected [None Given]
Answer:
Answers: a.
use of condesaable vapor in the cycle increases the efficiency of the
cycle
b.
the temperature at which energy is transferred to and from the
working liquid are less separated than in a carnot cycle
c.
in practical terms, the susceptibility of the engine materials to
corrosion is not a key limitation on the operating efficiency
d.
superheating increases the efficiency of a rankine cycle
• Question 9
0 out of 3.3 points
Which of the following is used as entrainer in acetic acid-water separation?
Selected Answer: [None Given]
Answers: a.
Hexane
b.
Butyl acetate
c.
Phosphorous
d.
Methyl alcohol
• Question 10
0 out of 3.3 points
Properties of non-reacting gas mixture are given by:
Selected [None Given]
Answer:
Answers: a.
arithmetic average
b.
volumetric weighting
c.
geometric weighting
d.
volumetric weighting for molecular weight and density, and
geometric weighting for all other properties except entropy.
• Question 11
0 out of 3.3 points
The heat of vaporization involves the change in enthalpy due to:
Selected Answer: [None Given]
Answers: a.
the change in phase from solid to liquid
b.
the energy released in a chemical reaction
c.
the change in phase is from solid to gas
d.
the change in phase in phase from liquid to gas
• Question 12
0 out of 3.3 points
Which of the engine is used for fighter bomber?
Selected Answer: [None Given]
Answers: a.
pulsejet
b.
rockets
c.
ramjet
d.
turbojet
• Question 13
0 out of 3.3 points
The type of filter where the filtering elements is replaceable
Selected Answer: [None Given]
Answers: a.
Paper edge filter
b.
Filer with element
c.
Metal edge filter
d.
Pressure filter
• Question 14
0 out of 3.3 points
The specific gravity of a substance is the ratio of its density to the density of:
Selected Answer: [None Given]
Answers: a.
air
b.
water
c.
mercury
d.
gas
• Question 15
0 out of 3.3 points
A liquid boils when its vapor pressure equals.
Selected Answer: [None Given]
Answers: a.
the gage pressure
b.
the ambient pressure
c.
the critical pressure
d.
one standard atmosphere
• Question 16
0 out of 3.3 points
Heat transfer due to density differential
Selected Answer: [None Given]
Answers: a.
Convection
b.
Radiation
c.
Conduction
d.
Nuclear
• Question 17
0 out of 3.3 points
Expansion factors take into account the:
Selected Answer: [None Given]
Answers: a.
Effects of compressibility
b.
Small effect of friction and turbulence of the orifice
c.
Area of the vena contracta
d.
Changes in diameters of converging pipe
• Question 18
0 out of 3.3 points
At all wavelengths and temperatures the monochromatic emissivity of a white
body is equal to to:
Selected Answer: [None Given]
Answers: a.
Zero
b.
0.5
c.
0.1 - 0.5
d.
Unity
• Question 19
0 out of 3.3 points
A type of radiation consisting of singly charged particles that generate to
intermediate distances.
Selected Answer: [None Given]
Answers: a.
Beta radiation
b.
Gamma radiation
c.
Nuclear radiation
d.
Alpha Radiation
• Question 20
0 out of 3.3 points
Mechanical energy of pressure transformed into energy of heat
Selected Answer: [None Given]
Answers: a.
Kinetic energy
b.
Enthalpy
c.
Heat of compression
d.
Heat exchanger
• Question 21
0 out of 3.3 points
The most probable cause for uneven wear of tires for a truck is:
Selected Answer: [None Given]
Answers: a.
Tires over loaded
b.
Excessive camber
c.
Any of the other choices
d.
Low tire pressure
• Question 22
0 out of 3.3 points
Is the condition of pressure and temperature at which a liquid and its vapor are
indistinguishable.
Selected Answer: [None Given]
Answers: a.
absolute humidity
b.
relative humidity
c.
dew point
d.
Critical point
• Question 23
0 out of 3.3 points
The heat transfer by conduction occurs in which of the following?
Selected Answer: [None Given]
Answers: a.
Only in liquids
b.
Only in liquids and gases
c.
Only in solids
d.
In solids, liquids, gases
• Question 24
0 out of 3.3 points
Pitot tube is use to measure the:
Selected Answer: [None Given]
Answers: a.
Flow
b.
Velocity of flow
c.
Velocity of pipe
d.
Velocity of mass
• Question 25
0 out of 3.3 points
A reservoir that supplies energy in the form of heat is called:
Selected Answer: [None Given]
Answers: a.
Cold reservoir
b.
Sink
c.
Heat reservoir
d.
Source
• Question 26
0 out of 3.3 points
When two bodies, isolated from other environment, are in equilibrium with a third
body, the two are in thermal equilibrium with each other.
Selected Answer: [None Given]
Answers: a.
first law of thermodynamics
b.
third law of thermodynamics
c.
Zeroth law of thermodynamics
d.
second law of thermodynamics
• Question 27
0 out of 3.3 points
Which of the following is the science of low temperature?
Selected Answer: [None Given]
Answers: a.
thermo-kinetics
b.
ergonomics
c.
thermodynamics
d.
cryogenics
• Question 28
0 out of 3.3 points
Which of the following is not a heat exchanger?
Selected Answer: [None Given]
Answers: a.
Condenser
b.
Water hammer
c.
Boilers
d.
Evaporators
• Question 29
0 out of 3.3 points
In natural convection a heated portion of a fluids moves because:
Selected Answer: [None Given]
Answers: a.
Of currents in the surrounding fluid
b.
Its density is less than that of the surrounding fluid
c.
Its molecules motions become aligned
d.
Of molecular collisions within it
• Question 30
0 out of 3.3 points
Gudgeon pins are made of:
Selected Answer: [None Given]
Answers: a.
Same materials as that of piston
b.
Cast iron
c.
Hardened and ground steel
d.
None of these
• Question 1
3.3 out of 3.3 points
The total mass per unit volume of any substance
Selected Answer: a.
Density
Answers: a.
Density
b.
Specific Volume
c.
Specific weight
d.
Specific gravity
• Question 2
0 out of 3.3 points
Gauge pressure and absolute pressure differ from each other by:
Selected Answer: a.
The size of the gauge
Answers: a.
The size of the gauge
b.
Atmospheric pressure
c.
Nothing they mean the same thing
d.
The system units
• Question 3
0 out of 3.3 points
Which of the following is the property of the solid that provides the measure of
the rate of heat transfer to the energy storage?
Selected Answer: a.
thermal efficiency
Answers: a.
thermal efficiency
b.
thermal radiography
c.
thermal diffusivity
d.
thermal conductivity
• Question 4
0 out of 3.3 points
A body that is hot compared to its surroundings illuminates more energy that it
receives, while it surrounding absorbs more energy than they give. The heat
transferred from one to another by energy wave motion. What is this mode of
heat transfer?
Selected Answer: a.
condensation
Answers: a.
condensation
b.
convection
c.
Radiation
d.
conduction
• Question 5
0 out of 3.3 points
A graph of enthalpy versus entropy for steam:
Selected Answer: [None Given]
Answers: a.
Moody diagram
b.
Maxwell diagram
c.
Mollier diagram
d.
Steam table
• Question 6
0 out of 3.3 points
If the composition of hydrocarbon fuel is known, the ration between the nitrogen
and oxygen that is supplied in air is:
Selected Answer: [None Given]
Answers: a.
Equal
b.
Fixed
c.
Intensity
d.
Constant
• Question 7
0 out of 3.3 points
In a vehicle the most probable cause for hard steering may be:
Selected Answer: [None Given]
Answers: a.
Any of the other choices
b.
Tie rod ends tight
c.
Bent wheel spindle
d.
Low tire pressure
• Question 8
0 out of 3.3 points
Properties of non-reacting gas mixture are given by:
Selected [None Given]
Answer:
Answers: a.
arithmetic average
b.
volumetric weighting
c.
geometric weighting
d.
volumetric weighting for molecular weight and density, and
geometric weighting for all other properties except entropy.
• Question 9
0 out of 3.3 points
All heat transfer processes require a medium of energy exchange except:
Selected Answer: [None Given]
Answers: a.
Natural convection
b.
Forced convection
c.
Radiation
d.
Conduction
• Question 10
0 out of 3.3 points
In the process of freeze drying, ice goes directly into water vapor. What is the
temperature at which this process can take place?
Selected Answer: [None Given]
Answers: a.
Below the triple point of water
b.
Any of the other choices, depending on the pressure
c.
Above the triple point of water
d.
At the triple point of water
• Question 11
0 out of 3.3 points
A type of water turbine where a jet of water is made to fall on the blades or
buckets and due to the impulse of water, the turbine starts to move.
Selected Answer: [None Given]
Answers: a.
Steam turbine
b.
Reaction turbine
c.
Pelton wheel
d.
Francis turbine
• Question 12
0 out of 3.3 points
A steam nozzle changes:
Selected Answer: [None Given]
Answers: a.
Heat energy into potential energy
b.
Kinetic energy into heat energy
c.
Potential energy into heat energy
d.
Heat energy into kinetic energy
• Question 13
0 out of 3.3 points
A specific property
Selected Answer: [None Given]
Answers: a.
is dependent of the phase of the substance
b.
defines a specific variable (e.g., temperature)
c.
is an extensive property multiplied by mass
d.
is independent of mass
• Question 14
0 out of 3.3 points
If an initial volume of an ideal gas is compressed to one-half its original volume
and to twice its original temperature, the pressure:
Selected Answer: [None Given]
Answers: a.
Triples
b.
Halves
c.
Quadruplets
d.
Doubles
• Question 15
0 out of 3.3 points
A liquid whose temperature is lower than saturation temperature corresponding
to the existing pressure:
Selected Answer: [None Given]
Answers: a.
Subcooled liquid
b.
Compressed liquid
c.
Pure liquid
d.
Saturated liquid
• Question 16
0 out of 3.3 points
A system in which there is a flow of mass across its boundaries
Selected Answer: [None Given]
Answers: a.
closed system
b.
steady flow system
c.
open system
d.
isolated system
• Question 17
0 out of 3.3 points
Hydraulic jump is used to:
Selected Answer: [None Given]
Answers: a.
Increase the flow rate
b.
Reduce the energy of flow
c.
Reduce the velocity of flow
d.
Reduce the flow rate
• Question 18
0 out of 3.3 points
Exhaust stroke of gasoline engine is also known as
Selected Answer: [None Given]
Answers: a.
Knocking
b.
Choking
c.
Scavenging
d.
Supercharging
• Question 19
0 out of 3.3 points
All of the following terms included in the second law for open system except:
Selected Answer: [None Given]
Answers: a.
Flow work
b.
Internal energy
c.
Shaft work
d.
Average energy
• Question 20
0 out of 3.3 points
To engage, securely and prevent dragging the clearance between bearing and
release collar in a clutch is generally:
Selected Answer: [None Given]
Answers: a.
20-22 mm
b.
2-3 mm
c.
10–12 mm
d.
30-32 mm
• Question 21
0 out of 3.3 points
The following properties are different for isomers of the same chemical compound
except
Selected Answer: [None Given]
Answers: a.
Melting point
b.
Number of atoms in a mole of each isomers
c.
Specific heat
d.
Density
• Question 22
0 out of 3.3 points
A small enough particles suspended in a fluid will exhibit small random
movements due to the statistical collision of fluid molecules on the particle’s
surface. This motion is called
Selected Answer: [None Given]
Answers: a.
Kinetic gas motion
b.
Boltzmann motion
c.
Brownian motion
d.
Rectilinear motion
• Question 23
0 out of 3.3 points
A material’s specific heat can be defined as;
Selected [None Given]
Answer:
Answers: a.
all of the other choices
b.
a function of temperature.
c.
the ratio of heat required to change the temperature of mass by a
change in temperature.
d.
being different for constant pressure and constant temperature
processes.
• Question 24
0 out of 3.3 points
What is the area under the curve of a pressure volume diagram?
Selected Answer: [None Given]
Answers: a.
Non flow work
b.
Steady flow work
c.
Heat
d.
Power
• Question 25
0 out of 3.3 points
Assuming real processes, the net entropy change in the universe:
Selected Answer: [None Given]
Answers: a.
is positive
b.
must be calculated
c.
equals zero
d.
is negative
• Question 26
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Maxwell’s constant
b.
Boltzmann’z constant
c.
Joule’s constant
d.
Napier constant
• Question 27
0 out of 3.3 points
The ff are all examples of indirect (secondary) miscellaneous methods to measure flow except:
d.
positive displacement meters
• Question 28
0 out of 3.3 points
In convection heat transfer, what mechanism heat transfer where the fluid
moves due to the decrease in its density caused by increase in temperature?
Selected Answer: [None Given]
Answers: a.
Density convection
b.
Forced convection
c.
Natural convection
d.
Radial convection
• Question 29
0 out of 3.3 points
Total sulfur content in a diesel fuel oil must not exceed
Selected Answer: [None Given]
Answers: a.
0.1%
b.
0.15%
c.
0.5%
d.
0.2%
• Question 30
3.3 out of 3.3 points
Which oil is more viscous?
Selected Answer: b.
SAE 80
Answers: a.
SAE 30
b.
SAE 80
c.
SAE 40
d.
SAE 50
• Question 1
0 out of 3.3 points
Which of the following is the usual geometric view factor for a black body?
Selected Answer: a.
Infinity
Answers: a.
Infinity
b.
One
c.
Indeterminate
d.
Zero
• Question 2
0 out of 3.3 points
In the cam, the distance between the base circle and the nose is known as
Selected Answer: a.
Nose
Answers: a.
Nose
b.
Lobe
c.
Lift
d.
Flank
• Question 3
0 out of 3.3 points
The process of splitting the nucleus into smaller fragments.
Selected Answer: a.
The Compton effect
Answers: a.
The Compton effect
b.
The photo electric effect
c.
Fusion
d.
Fission
• Question 4
0 out of 3.3 points
Dry air can be approximated as __% oxygen and __% nitrogen by mole numbers.
Selected Answer: a.
70% and 30%
Answers: a.
70% and 30%
b.
21% and 79%
c.
30% and 70%
d.
79% and 21%
• Question 5
3.3 out of 3.3 points
All of the following are types of chemical bonds except:
Selected Answer: a.
Nuclear bonds
Answers: a.
Nuclear bonds
b.
Ionic bonds
c.
Covalent bonds
d.
Metallic bonds
• Question 6
0 out of 3.3 points
In the deep well installation or operation, the difference between static water
level and operating water level is known as:
Selected Answer: a.
Suction lift
Answers: a.
Suction lift
b.
Clogging
c.
Drawdown
d.
Priming level
• Question 7
0 out of 3.3 points
The equivalent of ratio of emissive power to absorptivity for bodies in thermal
equilibrium is described by:
Selected Answer: a.
The logarithmic mean temperature difference
Answers: a.
The logarithmic mean temperature difference
b.
Kirchoff’s law
c.
Newton’s Law
d.
Fourier’s law
• Question 8
0 out of 3.3 points
The compressibility factor z, is used for predicting the behavior of non-ideal gases.
How is the compressibility factor defined relative to an ideal gas? (subscript c
refers to critical value)
Selected Answer: [None Given]
Answers: a.
Z = PV/RT
b.
Z = P/Pc
c.
Z = T/Tc
d.
Z = (T/Tc)(Pc/P)
• Question 9
0 out of 3.3 points
What do you call theoretical body where absorptivity and emissivity are
independent of the wavelength over the spectral region of the irradiation and the
surface emission?
Selected Answer: [None Given]
Answers: a.
opaque body
b.
black body
c.
transparent body
d.
white body
• Question 10
0 out of 3.3 points
A hot block is cooled by blowing cool air over its top surface. The heat that is
first transferred to the air layer close to the block is by conduction. It is
eventually carried away from the surface by ______.
Selected Answer: [None Given]
Answers: a.
Radiation
b.
Convection
c.
Thermal radiation
d.
Conduction
• Question 11
0 out of 3.3 points
A vena contracta in a fluid jet issuing through a hole in a plate is located
approximately:
Selected Answer: [None Given]
Answers: a.
At the orifice maximum diameter
b.
10 diameters downstream of the hole
c.
At jet’s minimum diameter
d.
At the orifice minimum diameter
• Question 12
0 out of 3.3 points
A spark voltage requires voltage of:
Selected Answer: [None Given]
Answers: a.
124 V
b.
112 V
c.
440 V
d.
220 V
• Question 13
0 out of 3.3 points
When four events takes place in one revolution of a crankshaft of an engine, the
engine is called:
Selected Answer: [None Given]
Answers: a.
Steam engine
b.
Rotary engine
c.
Four stroke engine
d.
Two stroke engine
• Question 14
0 out of 3.3 points
U + pV is a quantity called:
Selected Answer: [None Given]
Answers: a.
enthalpy
b.
internal energy
c.
shaft work
d.
entropy
• Question 15
0 out of 3.3 points
Oil pan is attached:
Selected Answer: [None Given]
Answers: a.
In a separate unit away from the crankcase
b.
At the outside wall of the crank case
c.
To the bottom of the cylinder block
d.
At the top of the cylinder block
• Question 16
0 out of 3.3 points
What is the apparatus used in the analysis of combustible gases?
Selected Answer: [None Given]
Answers: a.
Calorimeter
b.
Calorimetry
c.
Calorimeter differential
d.
Calorimeter gas
• Question 17
0 out of 3.3 points
What is the temperature when water and water vapor are in equilibrium with the
atmospheric pressure?
Selected Answer: [None Given]
Answers: a.
Steam point
b.
Ice point
c.
Critical point
d.
Freezing point
• Question 18
0 out of 3.3 points
Which of the following heat exchange device used to provide heat transfer
between the exhaust gases and air prior to the entrance of a combustor?
Selected Answer: [None Given]
Answers: a.
condenser
b.
reheater
c.
regenerator
d.
economizer
• Question 19
0 out of 3.3 points
What devices combines air and fuel for burning in cylinder?
Selected Answer: [None Given]
Answers: a.
Fuel injection
b.
Regenerator
c.
Intercooler
d.
Carburetor
• Question 20
0 out of 3.3 points
Removing of impurities from a gas by bubbling it through liquid purifying agent is
called
Selected Answer: [None Given]
Answers: a.
Gas liquefying
b.
Gas purifying
c.
Gas scrubbing
d.
Gas bubbling
• Question 21
0 out of 3.3 points
The temp of the fluid flowing under pressure through a pipe is usually measured
by:
Selected Answer: [None Given]
Answers: a.
A glass thermometer
b.
A thermocouple
c.
An electric resistance thermometer
d.
All of the other choices
• Question 22
0 out of 3.3 points
It is the energy stored within the body.
Selected Answer: [None Given]
Answers: a.
heat
b.
entropy
c.
internal energy
d.
enthalpy
• Question 23
0 out of 3.3 points
The king pin inclination is generally:
Selected Answer: [None Given]
Answers: a.
Between 1 and 2
b.
Between 2 and 5
c.
Less than 0.5
d.
More than 9
• Question 24
0 out of 3.3 points
Which of the following statements about entropy is false
Selected [None Given]
Answer:
Answers: a.
an irreversible process increases entropy of the universe
b.
net entropy change in any closed cycle is zero
c.
entropy of a crystal at 0 F is zero
d.
entropy of a mixture is greater than that of its components under
the same condition
• Question 25
0 out of 3.3 points
What is formed during incomplete combustion of carbon in fuels?
Selected Answer: [None Given]
Answers: a.
Carbon monoxide
b.
Oxygenated fuel
c.
Carbon dioxide
d.
Nitrogen oxide
• Question 26
0 out of 3.3 points
Is one whose pressure is higher than saturation pressure corresponding to its
temperature
Selected Answer: [None Given]
Answers: a.
super heated vapor
b.
saturated liquid
c.
compressed liquid
d.
saturated vapor
• Question 27
0 out of 3.3 points
Mechanism design to lower the temperature of air passing through it
Selected Answer: [None Given]
Answers: a.
air spill over
b.
air defense
c.
air cycle
d.
air cooler
• Question 28
0 out of 3.3 points
The firing order in case of four cylinder in engines is generally
Selected Answer: [None Given]
Answers: a.
1-2-4-3
b.
1-3-4-2
c.
1-4-3-2
d.
Either 1-3-4-2 or 1-4-3-2
• Question 29
0 out of 3.3 points
The device for smoothing out the power impulses from the engine is known as:
Selected Answer: [None Given]
Answers: a.
Clutch
b.
Fly wheel
c.
Gear box
d.
differential
• Question 30
0 out of 3.3 points
The following factors are necessary to define a thermodynamic cycle except:
Selected Answer: [None Given]
Answers: a.
High and low temperature
b.
Working substance
c.
The time it takes to complete the cycle
d.
The means of doing work on the system
• Question 1
0 out of 3.3 points
Automobile radiator is filled with:
Selected Answer: a.
Hard water
Answers: a.
Hard water
b.
Alkaline water
c.
Acidic water
d.
Soft water
• Question 2
3.3 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: a.
positive and negative pressure
Answers: a.
positive and negative pressure
b.
complex pressure
c.
variable pressure
d.
compound pressure
• Question 3
0 out of 3.3 points
In the process of freeze drying, ice goes directly into water vapor. What is the
temperature at which this process can take place?
Selected Answer: a.
At the triple point of water
Answers: a.
At the triple point of water
b.
Any of the other choices, depending on the pressure
c.
Above the triple point of water
d.
Below the triple point of water
• Question 4
3.3 out of 3.3 points
The term given to the collection of matter under consideration enclosed within a
boundary.
Selected Answer: a.
system
Answers: a.
system
b.
environment
c.
atoms
d.
matter
• Question 5
0 out of 3.3 points
The Bureau of Standard uses, among others, liquid – vapor equilibrium of Nitrogen
at.
Selected Answer: a.
253°C
Answers: a.
253°C
b.
196°C
c.
-253°C
d.
-196°C
• Question 6
0 out of 3.3 points
A laminated glass on cracking:
Selected Answer: a.
Bursts into granular pieces
Answers: a.
Bursts into granular pieces
b.
Bursts into sharp edged fragments
c.
Breaks into the farm of crystals
d.
Sandwiched layer taps the fragments
• Question 7
0 out of 3.3 points
A Kaplan turbine is:
Selected Answer: [None Given]
Answers: a.
A high head mixed flow turbine
b.
Low head axial flow turbine
c.
An inward flow impulse turbine
d.
An outward flow reaction turbine
• Question 8
0 out of 3.3 points
The triple point of a substance is the temperature and pressure at which:
Selected [None Given]
Answer:
Answers: a.
The solid and gaseous phase are in equilibrium
b.
The solid liquid and gaseous phases are in the equilibrium
c.
The solid does not melt, the liquid does not boil and the gas does
not condense
d.
The solid and liquid phase are in equilibrium
• Question 9
0 out of 3.3 points
A vena contracta in a fluid jet issuing through a hole in a plate is located
approximately:
Selected Answer: [None Given]
Answers: a.
At the orifice minimum diameter
b.
At jet’s minimum diameter
c.
At the orifice maximum diameter
d.
10 diameters downstream of the hole
• Question 10
0 out of 3.3 points
Which of the following statements about entropy is false
Selected [None Given]
Answer:
Answers: a.
an irreversible process increases entropy of the universe
b.
net entropy change in any closed cycle is zero
c.
entropy of a mixture is greater than that of its components under
the same condition
d.
entropy of a crystal at 0 F is zero
• Question 11
0 out of 3.3 points
Energy changes are represented by all except which one of the following
Selected Answer: [None Given]
Answers: a.
– ?Vdp
b.
dQ/T
c.
Tds – Pdv
d.
mCpdt
• Question 12
0 out of 3.3 points
All of the following are characteristics of metals except:
Selected Answer: [None Given]
Answers: a.
Tendency to form positive ions
b.
High electrical conductivities
c.
Tendency to form brittle solids
d.
High melting points
• Question 13
0 out of 3.3 points
Diesel cycle consists of:
Selected [None Given]
Answer:
Answers: a.
isentropic, isothermal, constant volume, constant pressure process
b.
two constant pressure, one constant
c.
two constant volume, one constant pressure, and one isothermal
process
d.
two isentropic, one constant volume and one constant pressure
processes
• Question 14
0 out of 3.3 points
The Beattie-Bridgeman equation of state is quite accurate in cases of:
Selected Answer: [None Given]
Answers: a.
Densities less than about 0.8 times the critical density
b.
Near critical temperature
c.
All pressures above atmospheric pressure
d.
None of the other choices
• Question 15
0 out of 3.3 points
Radiant heat transfer is described by :
Selected Answer: [None Given]
Answers: a.
Newton’s Law
b.
Kirchoff’s Law
c.
Fourier’s Law
d.
The Logarithmic mean temperature
• Question 16
0 out of 3.3 points
Which of the following relations defines enthalpy?
Selected Answer: [None Given]
Answers: a.
h = u + p/t
b.
h = u+P/V
c.
h = pV + T
d.
h = u + PV
• Question 17
0 out of 3.3 points
The extension and compression of helical spring is an example of what process?
Selected Answer: [None Given]
Answers: a.
Reversible process
b.
Isothermal process
c.
Thermodynamic process
d.
Adiabatic process
• Question 18
0 out of 3.3 points
The only base unit with a prefix kilo is
Selected Answer: [None Given]
Answers: a.
Kilogram
b.
kilopascal
c.
Kilometer
d.
Kilo Joule
• Question 19
0 out of 3.3 points
By which of the following modes of heat transfer is Stefan-Boltzmann law
applicable?
Selected Answer: [None Given]
Answers: a.
Radiation
b.
Conduction and radiation combined
c.
Convection and radiation combined
d.
Conduction
• Question 20
0 out of 3.3 points
Heat transfer processes which include a change of phase of a fluid are
considered _____.
Selected Answer: [None Given]
Answers: a.
Conduction
b.
Convection
c.
Radiation
d.
Thermal radiation
• Question 21
0 out of 3.3 points
It is the term used to describe the energy of the body that can be transmitted in
the form of heat.
Selected Answer: [None Given]
Answers: a.
enthalpy
b.
internal energy
c.
thermal energy
d.
entropy
• Question 22
0 out of 3.3 points
Oil pan is attached:
Selected Answer: [None Given]
Answers: a.
At the outside wall of the crank case
b.
At the top of the cylinder block
c.
To the bottom of the cylinder block
d.
In a separate unit away from the crankcase
• Question 23
0 out of 3.3 points
The matching model and full-scale prototype results a fluid dynamic phenomena
involving a fully submerged body requires equality of:
Selected Answer: [None Given]
Answers: a.
Cauchy number
b.
Weber number
c.
Reynolds number
d.
Froude number
• Question 24
0 out of 3.3 points
Which of the following has the highest thermal conductivity?
Selected Answer: [None Given]
Answers: a.
Alcohol
b.
Gasoline
c.
Water
d.
Mercury
• Question 25
0 out of 3.3 points
Exhaust stroke of gasoline engine is also known as
Selected Answer: [None Given]
Answers: a.
Supercharging
b.
Choking
c.
Knocking
d.
Scavenging
• Question 26
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if the temperature is
extremely high?
Selected Answer: [None Given]
Answers: a.
Decreases except for ferrous metals
b.
Approaches infinity
c.
Almost constant except for ferromagnetic materials
d.
Increases except for steel
• Question 27
0 out of 3.3 points
Critical properties refer to
Selected [None Given]
Answer:
Answers: a.
extremely important properties, such as temperature and
pressure
b.
heat required for phase change and important for energy
production
c.
property values where liquid and gas phase are indistinguishable
d.
properties having to do with equilibrium conditions, such as the
Gibbs and Helmholtz
• Question 28
0 out of 3.3 points
Which of the following conductivities where Sutherland equation is used?
Selected Answer: [None Given]
Answers: a.
Thermal conductivities of metal
b.
Thermal conductivities of solids
c.
Thermal conductivities of liquids
d.
Thermal conductivities of gasses
• Question 29
0 out of 3.3 points
What device is used to measure the amount of infrared radiation in each portion
of a person’s skin that is emitted?
Selected Answer: [None Given]
Answers: a.
Thermometer
b.
Potentiometer
c.
Pyrometer
d.
Thermograph
• Question 30
0 out of 3.3 points
When the entire heat exchanger is selected as control volume, heat becomes
_____.?
Selected Answer: [None Given]
Answers: a.
Unity
b.
Zero
c.
Indeterminate
d.
Undefined
• Question 1
0 out of 3.3 points
A water temperature of 18 F in the water cooled condenser is equivalent in C to
Selected Answer: a.
-9.44
Answers: a.
-9.44
b.
263.56
c.
7.78
d.
10
• Question 2
0 out of 3.3 points
What must be done to change the direction of rotation of a 440-volt, 3-phase
induction motor?
Selected Answer: a.
Reverse lines to start winding
Answers: a.
Reverse lines to start winding
b.
Remove any power leads
c.
Replace any two wires to the rotor
d.
Interchange any two power leads
• Question 3
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are negligible or
insignificant, the work input to an adiabatic compressor is___________.
Selected Answer: a.
Negligible
Answers: a.
Negligible
b.
Equal to change in enthalpy
c.
Infinity
d.
Zero
• Question 4
0 out of 3.3 points
Removing of impurities from a gas by bubbling it through liquid purifying agent is
called
Selected Answer: a.
Gas bubbling
Answers: a.
Gas bubbling
b.
Gas scrubbing
c.
Gas liquefying
d.
Gas purifying
• Question 5
0 out of 3.3 points
Flow measuring devices include all of the following except:
Selected Answer: a.
Pitot tubes
Answers: a.
Pitot tubes
b.
Precision tachometers
c.
Venture area meters
d.
Flow nozzles
• Question 6
0 out of 3.3 points
The pressure obtained from barometric pressure reading.
Selected Answer: a.
gage pressure
Answers: a.
gage pressure
b.
atmospheric pressure
c.
absolute pressure
d.
vacuum pressure
• Question 7
0 out of 3.3 points
What is the usual value of transmissivity for opaque materials?
A.0
Selected Answer: [None Given]
Answers: a.
1
b.
Infinity
c.
Indeterminate
• Question 8
0 out of 3.3 points
What is the value of the Prandt’l number for air?
Selected Answer: [None Given]
Answers: a.
6.7
b.
67
c.
0.7
d.
10
• Question 9
0 out of 3.3 points
In a confined gas if the absolute pressure is held constant the volume is directly
proportional to the absolute pressure.
Selected Answer: [None Given]
Answers: a.
Boyle’s law
b.
Dalton’s law
c.
Charles law
d.
Avogadro’s law
• Question 10
0 out of 3.3 points
In a vehicle the most probable cause for hard steering may be:
Selected Answer: [None Given]
Answers: a.
Bent wheel spindle
b.
Any of the other choices
c.
Tie rod ends tight
d.
Low tire pressure
• Question 11
0 out of 3.3 points
The temp of the fluid flowing under pressure through a pipe is usually measured
by:
Selected Answer: [None Given]
Answers: a.
A thermocouple
b.
A glass thermometer
c.
An electric resistance thermometer
d.
All of the other choices
• Question 12
0 out of 3.3 points
Common causes for excessive oil consumption
Selected Answer: [None Given]
Answers: a.
Heavy oil and light bearings
b.
High speed and worn engine
c.
Short trips and cold weather
d.
Frequent oil changes
• Question 13
0 out of 3.3 points
Clutch slippage while clutch is engaged is specially noticeable
Selected Answer: [None Given]
Answers: a.
At low speed
b.
During braking
c.
During idling
d.
During acceleration
• Question 14
0 out of 3.3 points
The vapor pressure is related to the enthalpy of vaporization by the:
Selected Answer: [None Given]
Answers: a.
Dalton’s law
b.
Rauolt’s law
c.
Maxwell’s equation
d.
Clausius-Clayperon equation
• Question 15
0 out of 3.3 points
As a rule before the piston are removed, it is essential to remove the :
Selected Answer: [None Given]
Answers: a.
Circlip
b.
Crankshaft
c.
Gudgeon pin
d.
Piston rings
• Question 16
0 out of 3.3 points
The coefficient of the velocity, Cv accounts for the:
Selected Answer: [None Given]
Answers: a.
Effects on the flow area of contraction, friction, and turbulence
b.
Effects of compressibility
c.
Changes in diameters of converging pipe
d.
Small effect of friction and turbulence of the orifice
• Question 17
0 out of 3.3 points
It is a form of energy associated with the kinetic random motion of large number of
molecules.
Selected Answer: [None Given]
Answers: a.
Heat
b.
Enthalpy
c.
kinetic energy
d.
internal energy
• Question 18
0 out of 3.3 points
In a two-phase system, 30% moisture means
Selected Answer: [None Given]
Answers: a.
30% liquid and 100% vapor
b.
70% liquid and 30% vapor
c.
70% vapor and 30% liquid
d.
30% vapor and 100% liquid
• Question 19
0 out of 3.3 points
If any one or more properties of a system change, the system is said to have
undergone a ________.
Selected Answer: [None Given]
Answers: a.
cycle
b.
control
c.
process
d.
flow
• Question 20
0 out of 3.3 points
The Carnot refrigeration cycle includes all of the following processes except:
Selected Answer: [None Given]
Answers: a.
Isenthalpic expansion
b.
Isothermal heating
c.
Isentropic compression
d.
Isentropic expansion
• Question 21
0 out of 3.3 points
The device that measure temperature by the electromotive force called
thermocouple was discovered by:
Selected Answer: [None Given]
Answers: a.
Fahrenheit
b.
Celcius
c.
Galileo
d.
Seebeck
• Question 22
0 out of 3.3 points
The following properties are different for isomers of the same chemical compound
except
Selected Answer: [None Given]
Answers: a.
Specific heat
b.
Number of atoms in a mole of each isomers
c.
Density
d.
Melting point
• Question 23
0 out of 3.3 points
What condition exist in an adiabatic throttling process?
Selected Answer: [None Given]
Answers: a.
Enthalpy is constant
b.
Enthalpy is variable
c.
Entropy is constant
d.
Specific volume is constant
• Question 24
0 out of 3.3 points
A system composed of ice and water at 0°C is said to be _______________.
Selected Answer: [None Given]
Answers: a.
a multiphase material
b.
in thermal equilibrium
c.
in thermodynamic equilibrium
d.
all of the other choices
• Question 25
0 out of 3.3 points
When two bodies, isolated from other environment, are in equilibrium with a third
body, the two are in thermal equilibrium with each other.
Selected Answer: [None Given]
Answers: a.
second law of thermodynamics
b.
first law of thermodynamics
c.
Zeroth law of thermodynamics
d.
third law of thermodynamics
• Question 26
0 out of 3.3 points
In case of four cylinder opposed cylinder engines, the firing order is
Selected Answer: [None Given]
Answers: a.
1-4-3-2
b.
1-2-3-4
D.1-2-4-3
c.
1-3-4-2
• Question 27
0 out of 3.3 points
Graduations in the properties of elements from one elements to the next less
pronounced in:
Selected Answer: [None Given]
Answers: a.
Active metals
b.
Periods
c.
Groups
d.
The lanthanide series
• Question 28
0 out of 3.3 points
What is the reason why Styrofoam is a good insulating material?
Selected [None Given]
Answer:
Answers: a.
The structure of Styrofoam is vary unsuitable and heat cannot
flow
b.
Styrofoam is a white object
c.
Because it contains many tiny pockets of air
d.
Styrofoam structure is very dense
• Question 29
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Maxwell’s constant
b.
Napier constant
c.
Joule’s constant
d.
Boltzmann’z constant
• Question 30
0 out of 3.3 points
A correction of LMTD is essential in case of:
Selected Answer: [None Given]
Answers: a.
Counter current heat exchanger
b.
Cross flow heat exchanger
c.
Parallel flow hear exchanger
d.
None of the other choices
• Question 1
0 out of 3.3 points
What is the absolute temperature in Celsius scale?
Selected Answer: a.
Degree Rankine
Answers: a.
Degree Rankine
b.
Degrees Kelvin
c.
Absolute Fahrenheit
d.
Absolute Celsius
• Question 2
3.3 out of 3.3 points
The following factors are necessary to define a thermodynamic cycle except:
Selected Answer: a.
The time it takes to complete the cycle
Answers: a.
The time it takes to complete the cycle
b.
The means of doing work on the system
c.
Working substance
d.
High and low temperature
• Question 3
3.3 out of 3.3 points
What is the SI unit of force
Selected Answer: d.
newton
Answers: a.
dyne
b.
pound
c.
kilogram
d.
newton
• Question 4
3.3 out of 3.3 points
Which of the following is not a unit of the rate of heat transfer?
Selected Answer: d.
BTU/hp-hr
Answers: a.
cal/s
b.
Watt
c.
BTU/hr
d.
BTU/hp-hr
• Question 5
0 out of 3.3 points
Which of the following is the basis for Bernoulli’s law for fluid flow?
Selected Answer: [None Given]
Answers: a.
the continuity equation
b.
fourier’s law
c.
the principle of conservation of energy
d.
the principle of conservation of mass
• Question 6
0 out of 3.3 points
The coefficient of contraction is the ratio of the :
Selected Answer: [None Given]
Answers: a.
Actual velocity to the theoretical velocity
b.
Effective head to the actual head
c.
Area of vena contracta to the orifice area
d.
Actual discharge to the theoretical discharge
• Question 7
0 out of 3.3 points
A laminated glass on cracking:
Selected Answer: [None Given]
Answers: a.
Sandwiched layer taps the fragments
b.
Bursts into granular pieces
c.
Breaks into the farm of crystals
d.
Bursts into sharp edged fragments
• Question 8
0 out of 3.3 points
A body that is hot compared to its surroundings illuminates more energy that it
receives, while it surrounding absorbs more energy than they give. The heat
transferred from one to another by energy wave motion. What is this mode of
heat transfer?
Selected Answer: [None Given]
Answers: a.
conduction
b.
Radiation
c.
convection
d.
condensation
• Question 9
0 out of 3.3 points
The solid – liquid equilibrium of Platinum is at what temperature?
Selected Answer: [None Given]
Answers: a.
3730°C
b.
3037°C
c.
3073°C
d.
3370°C
• Question 10
0 out of 3.3 points
Flow measuring devices include all of the ff except:
Selected Answer: [None Given]
Answers: a.
Static pressure probes
b.
Turbine and propeller meters
c.
Magnetic dynamometers
d.
Venturi meters
• Question 11
0 out of 3.3 points
Equilibrium condition exists in all except which of the following?
Selected [None Given]
Answer:
Answers: a.
in a steady state flow process
b.
in reversible processes
c.
where nothing can occur without an effect on the system’s
surrounding
d.
in processes where driving forces are infinitesimals
• Question 12
0 out of 3.3 points
A substance that exists , or is regarded as existing, as a continuous characterized by
a low resistance to flow and the tendency to assume the shape of its container
Selected Answer: [None Given]
Answers: a.
molecule
b.
vapor
c.
fluid
d.
atom
• Question 13
0 out of 3.3 points
All of the following are properties of an ideal gas except:
Selected Answer: [None Given]
Answers: a.
Temperature
b.
Density
c.
Pressure
d.
Viscosity
• Question 14
0 out of 3.3 points
In a hydro – electric plant using a Francis turbine with medium head, the speed can
be regulated using the
Selected Answer: [None Given]
Answers: a.
Deflector gate
b.
Nozzle
c.
Weir
d.
Wicket gate
• Question 15
0 out of 3.3 points
A substance that is able to absorb liquids or gasses and is used for removing
them from a given region or medium.
Selected Answer: [None Given]
Answers: a.
Cohesive
b.
Adhesive
c.
Absorbent
d.
Adsorbent
• Question 16
0 out of 3.3 points
U + pV is a quantity called:
Selected Answer: [None Given]
Answers: a.
shaft work
b.
entropy
c.
internal energy
d.
enthalpy
• Question 17
0 out of 3.3 points
The term given to the collection of matter under consideration enclosed within a
boundary.
Selected Answer: [None Given]
Answers: a.
system
b.
atoms
c.
matter
d.
environment
• Question 18
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: [None Given]
Answers: a.
Increasing and decreasing temperature
b.
Constant temperature
c.
Increasing temperature
d.
Decreasing temperature
• Question 19
0 out of 3.3 points
Properties of non- reacting gas mixtures are given by
Selected [None Given]
Answer:
Answers: a.
Arithmetic average
b.
Volumetric weighting for molecular weight and density, and
geometric weighting for all other properties except entropy
c.
Volumetric weighting
d.
Geometric weighting
• Question 20
0 out of 3.3 points
The number of protons in the nucleus of an atom or the number of electrons in the
orbit of an atom
Selected Answer: [None Given]
Answers: a.
atomic number
b.
atomic weight
c.
atomic mass
d.
atomic volume
• Question 21
0 out of 3.3 points
Each of the following is correct values of standard atmospheric pressure except:
Selected Answer: [None Given]
Answers: a.
1,000 atm
b.
1013 mmHg
c.
760 torr
d.
14.962 psia
• Question 22
0 out of 3.3 points
What keeps the moisture from passing through the system?
Selected Answer: [None Given]
Answers: a.
Dehydrator
b.
Aerator
c.
Humidifier
d.
Trap
• Question 23
0 out of 3.3 points
The measure of the randomness of the molecules of a substance.
Selected Answer: [None Given]
Answers: a.
heat
b.
internal energy
c.
enthalpy
d.
entropy
• Question 24
0 out of 3.3 points
The total mass per unit volume of any substance
Selected Answer: [None Given]
Answers: a.
Specific Volume
b.
Specific weight
c.
Specific gravity
d.
Density
• Question 25
0 out of 3.3 points
The properties for a unit mass and are intensive by definition such as specific
volume
Selected Answer: [None Given]
Answers: a.
thermodynamic properties
b.
intensive properties
c.
extensive properties
d.
specific properties
• Question 26
0 out of 3.3 points
If a substance temperature is less than its saturation temperature , the
substance is:
Selected Answer: [None Given]
Answers: a.
subcooled liquid
b.
saturated vapor
c.
superheated vapor
d.
wet vapor
• Question 27
0 out of 3.3 points
Piston rings are made of:
Selected Answer: [None Given]
Answers: a.
Carbon steel
b.
Alloy steel
c.
Cast iron
d.
Copper
• Question 28
0 out of 3.3 points
Which one of the following is standard temperature and pressure (STP)
Selected Answer: [None Given]
Answers: a.
0k and 1 atm pressure
b.
32 F and zero pressure
c.
0f and zero pressure
d.
0 C and 1 atm pressure
• Question 29
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
Positive and negative pressures
b.
Variable pressures
c.
Complex pressures
d.
Average pressures
• Question 30
0 out of 3.3 points
What is the true about the polytropic exponent n for a perfect gas undergoing an
isobaric process?
Selected Answer: [None Given]
Answers: a.
n=0
b.
n >0
c.
n<0
d.
n=8
• Question 1
0 out of 3.3 points
For the same heat input and same compression ratio:
Selected Answer: a.
Otto cycle is less efficient than diesel cycle
Answers: a.
Otto cycle is less efficient than diesel cycle
b.
None of the other choices is correct
c.
Both otto cycle and diesel cycle are equally efficient
d.
Efficiency depends mainly on the working substance
• Question 2
0 out of 3.3 points
A system in which there is no exchange of matter with the surrounding or mass
does not cross its boundaries
Selected Answer: b.
open system
Answers: a.
closed system
b.
open system
c.
isolated system
d.
nonflow system
• Question 3
0 out of 3.3 points
Flows of fluid wherein its particles do not have definite paths and the paths of the
individual and distinct particles cross one another is:
Selected Answer: a.
Unsteady flow
Answers: a.
Unsteady flow
b.
Non-uniform flow
c.
Turbulent flow
d.
Laminar flow
• Question 4
3.3 out of 3.3 points
Which of the following is the equivalent heat transferred of a gas undergoing
isometric process?
Selected Answer: a.
change in internal energy
Answers: a.
change in internal energy
b.
work nonflow
c.
change in enthalpy
d.
change in entropy
• Question 5
0 out of 3.3 points
All of the following are components of a chemical elements except:
Selected Answer: a.
Protons
Answers: a.
Protons
b.
Electrons
c.
Neutrons
d.
Ions
• Question 6
0 out of 3.3 points
Loss power is due to:
Selected Answer: a.
Poor compression
Answers: a.
Poor compression
b.
Low injection pressure
c.
Restricted exhaust
d.
Clogging of air cleaner
• Question 7
0 out of 3.3 points
One could expect the possibility of Reynolds number similarity in all of the ff cases except:
b.
Carnot efficiency
c.
Cycle efficiency
d.
Process irreversibility
• Question 10
0 out of 3.3 points
What is the series of process that eventually bring the system back to its original
condition
Selected Answer: [None Given]
Answers: a.
Irreversible process
b.
Isentropic process
c.
Reversible process
d.
Cycle
• Question 11
0 out of 3.3 points
A stirling cycle has
Selected Answer: [None Given]
Answers: a.
Two adiabatic and two constant volume process
b.
Two adiabatic and two constant pressure processes
c.
Two isothermal and two constant pressure processes
d.
Two isothermal and two constant volume processes
• Question 12
0 out of 3.3 points
Wax is applied on card body as:
Selected Answer: [None Given]
Answers: a.
It seals off the pores
b.
Ay of the other choices
c.
It is water repellent
d.
The surface shines
• Question 13
0 out of 3.3 points
How do you classify a body that has an emissivity factor of 0.7?
Selected Answer: [None Given]
Answers: a.
Black body
b.
Gray body
c.
White body
d.
Theoretical body
• Question 14
0 out of 3.3 points
What is the temperature when water and water vapor are in equilibrium with the
atmospheric pressure?
Selected Answer: [None Given]
Answers: a.
Steam point
b.
Freezing point
c.
Ice point
d.
Critical point
• Question 15
0 out of 3.3 points
Stagnation enthalpy represents the enthalpy of a fluid when it is brought to rest:
Selected Answer: [None Given]
Answers: a.
Isometrically
b.
Isothermally
c.
Disobarically
d.
Adiabatically
• Question 16
0 out of 3.3 points
In series pipe systems, all of the ff parameters vary from section to section
except
Selected Answer: [None Given]
Answers: a.
Friction loss
b.
Pressure drop
c.
Head loss
d.
Mass flow
• Question 17
0 out of 3.3 points
The sublimation involves the change in enthalpy due to:
Selected Answer: [None Given]
Answers: a.
the change in phase from solid to gas
b.
the change in phase from solid to liquid
c.
the change in phase from liquid to gas
d.
the energy released in a chemical reaction
• Question 18
0 out of 3.3 points
A substance whose burning with oxygen yields heat energy such as coal, petroleum
and natural gas.
Selected Answer: [None Given]
Answers: a.
Fluid
b.
Fuel
c.
Gas
d.
Air
• Question 19
0 out of 3.3 points
Acceleration is proportional to force.
Selected Answer: [None Given]
Answers: a.
Newton’s law
b.
Law of gravitation
c.
Theory of relativity
d.
Archimedes principle
• Question 20
0 out of 3.3 points
Which of the following statements is not true for real gases?
Selected [None Given]
Answer:
Answers: a.
Real gases are found only rarely in nature
b.
Molecules occupy a volume not negligible in comparison to the
total volume of gas
c.
The law of corresponding states may be used for real gases
d.
Real gases are subjected to attractive forces between molecules
(e.g. Van der Waal’s forces)
• Question 21
0 out of 3.3 points
The temperature potential between temperature at the two ends of a heat
exchanger are given by:
Selected Answer: [None Given]
Answers: a.
Fourier’s law
b.
the logarithmic mean temperature difference
c.
the Stefan-Boltzman law
d.
Kirchoff’s law
• Question 22
0 out of 3.3 points
Adiabatic heat transfer within a vapor cycle refers to:
Selected [None Given]
Answer:
Answers: a.
Heat transfer that is atmospheric bit not reversible
b.
the net heat transfer equals the energy change if no work done.
c.
the net transfer equal the net work of the cycle
d.
The transfer of energy from one stream to another in a heat
exchanger so that the energy of the input
• Question 23
0 out of 3.3 points
Which of the following cycles has two isothermal and two constant volume
processes?
Selected Answer: [None Given]
Answers: a.
Diesel cycle
b.
Joule cycle
c.
Stirling cycle
d.
Ericsson cycle
• Question 24
0 out of 3.3 points
The following properties are different for isomers of the same chemical compound
except
Selected Answer: [None Given]
Answers: a.
Density
b.
Melting point
c.
Number of atoms in a mole of each isomers
d.
Specific heat
• Question 25
0 out of 3.3 points
Which of the following provides the basis for measuring thermodynamic property
of temperature?
Selected Answer: [None Given]
Answers: a.
zeroth law of thermodynamics
b.
first law of thermodynamics
c.
second law of thermodynamics
d.
third law of thermodynamics
• Question 26
0 out of 3.3 points
In a confined gas if the absolute pressure is held constant the volume is directly
proportional to the absolute pressure.
Selected Answer: [None Given]
Answers: a.
Charles law
b.
Dalton’s law
c.
Avogadro’s law
d.
Boyle’s law
• Question 27
0 out of 3.3 points
Which of the following gasses can be used to measure the lowest temperature?
Selected Answer: [None Given]
Answers: a.
Oxygen
b.
Nitrogen
c.
Helium
d.
Hydrogen
• Question 28
0 out of 3.3 points
In pumped storage plant
Selected Answer: [None Given]
Answers: a.
Power is produced by pumps
b.
Pressure accumulators are used
c.
Downstream water is pumped upstream during offload periods
d.
Water is stored by pumping to high pressures
• Question 29
0 out of 3.3 points
The first and second laws of thermodynamics are:
Selected Answer: [None Given]
Answers: a.
Momentum equations
b.
Continuity equations
c.
Equations of state
d.
Energy equations
• Question 30
0 out of 3.3 points
What is the apparatus used in the analysis of combustible gases?
Selected Answer: [None Given]
Answers: a.
Calorimeter differential
b.
Calorimeter gas
c.
Calorimetry
d.
Calorimeter
• Question 1
3.3 out of 3.3 points
Which of the following is a characteristic of an impulse turbine?
Selected Answer: d.
Steam striking blades at zero angle
Answers: a.
Steam striking blades on angle
b.
Steam reversing direction
c.
No steam reaction to velocity
d.
Steam striking blades at zero angle
• Question 2
3.3 out of 3.3 points
A system composed of ice and water at 0°C is said to be _______________.
Selected Answer: c.
all of the other choices
Answers: a.
a multiphase material
b.
in thermodynamic equilibrium
c.
all of the other choices
d.
in thermal equilibrium
• Question 3
3.3 out of 3.3 points
Non-isotropic conductivity is shown by which of the following?
Selected Answer: d.
Wood
Answers: a.
Brass
b.
Copper
c.
Steel
d.
Wood
• Question 4
3.3 out of 3.3 points
In which direction the heat is transferred through conduction?
Selected Answer: b.
decreasing temperature
Answers: a.
increasing and decreasing temperature
b.
decreasing temperature
c.
increasing temperature
d.
constant temperature
• Question 5
3.3 out of 3.3 points
The temperature at which its vapor pressure is equal to the pressure exerted on
the liquid
Selected Answer: a.
boiling point
Answers: a.
boiling point
b.
thermal point
c.
calorimetry
d.
absolute humidity
• Question 6
3.3 out of 3.3 points
The Bureau of Standard uses, among others, the liquid – vapor equilibrium of
hydrogen at.
Selected Answer: a.
-253°C
Answers: a.
-253°C
b.
196°C
c.
253°C
d.
-196°C
• Question 7
3.3 out of 3.3 points
The specific gravity of a substance is the ratio of its density to the density of:
Selected Answer: c.
water
Answers: a.
gas
b.
air
c.
water
d.
mercury
• Question 8
3.3 out of 3.3 points
Which of the following property of liquid extend resistance to angular or shear
deformation:
Selected Answer: c.
Viscosity
Answers: a.
Specific gravity
b.
Density
c.
Viscosity
d.
Specific weight
• Question 9
3.3 out of 3.3 points
The solid – liquid equilibrium of Silver is at what temperature?
Selected Answer: a.
960.8°C
Answers: a.
960.8°C
b.
1063°C
c.
630.5°C
d.
1774°C
• Question 10
3.3 out of 3.3 points
Nozzle does not involve any work interaction. The fluid through this device
experiences:
Selected Answer: a.
No change in potential energy
Answers: a.
No change in potential energy
b.
Vacuum
c.
No change in kinetic energy
d.
No change in enthalpy
• Question 11
3.3 out of 3.3 points
In the cam, the distance between the base circle and the nose is known as
Selected Answer: a.
Lift
Answers: a.
Lift
b.
Lobe
c.
Nose
d.
Flank
• Question 12
3.3 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: d.
Decreasing temperature
Answers: a.
Increasing and decreasing temperature
b.
Constant temperature
c.
Increasing temperature
d.
Decreasing temperature
• Question 13
3.3 out of 3.3 points
The themodynamic cycle used in a thermal power plant is
Selected Answer: a.
Rankine
Answers: a.
Rankine
b.
Ericson
c.
Bryton
d.
Joule
• Question 14
3.3 out of 3.3 points
The compressibility factor z, is used for predicting the behavior of non-ideal gases.
How is the compressibility factor defined relative to an ideal gas? (subscript c
refers to critical value)
Selected Answer: c.
Z = PV/RT
Answers: a.
Z = (T/Tc)(Pc/P)
b.
Z = P/Pc
c.
Z = PV/RT
d.
Z = T/Tc
• Question 15
3.3 out of 3.3 points
A stirling cycle has
Selected Answer: d.
Two isothermal and two constant volume processes
Answers: a.
Two isothermal and two constant pressure processes
b.
Two adiabatic and two constant volume process
c.
Two adiabatic and two constant pressure processes
d.
Two isothermal and two constant volume processes
• Question 16
3.3 out of 3.3 points
In a four stroke engine if a valve opens 25 before B.D.C. and close 10 after T.D.C the
valve should be:
Selected Answer: d.
Exhaust valve
Answers: a.
Puppet valve
b.
Inlet valve
c.
Spring valve
d.
Exhaust valve
• Question 17
3.3 out of 3.3 points
For steam nozzle, which of the following ratios will have the value less than unity?
Selected Answer: a.
Specific volume at inlet/specific volume at outlet
Answers: a.
Specific volume at inlet/specific volume at outlet
b.
Pressure at inlet/pressure at outlet
c.
None of the other choices
d.
Temperature of steam at inlet/temperature of steam at outlet
• Question 18
3.3 out of 3.3 points
In fluid, linear momentum is:
Selected d.
Answer: A vector quantity equal to the product of mass and velocity
Answers: a.
A scalar quantity equal to the product of force and length of time
applied
b.
The change in impulse
c.
A scalar quantity equal to the product of mass and velocity
d.
A vector quantity equal to the product of mass and velocity
• Question 19
3.3 out of 3.3 points
ASTM coal classification is based on:
Selected Answer: d.
Proximate analysis
Answers: a.
Orsat analysis
b.
None of the other choices
c.
Ultimate analysis
d.
Proximate analysis
• Question 20
3.3 out of 3.3 points
The statement that emissivity and absorptivity of a surface is surrounded by its
own temperature the same for both monochromatic and total radiation is called:
Selected Answer: a.
Kirchoff’s Law
Answers: a.
Kirchoff’s Law
b.
Lambert’s Law
c.
D’Alambart’s
d.
Law of emissivity
• Question 21
3.3 out of 3.3 points
A Kaplan turbine is:
Selected Answer: b.
Low head axial flow turbine
Answers: a.
A high head mixed flow turbine
b.
Low head axial flow turbine
c.
An inward flow impulse turbine
d.
An outward flow reaction turbine
• Question 22
3.3 out of 3.3 points
Diesel cycle consists of:
Selected d.
Answer: two isentropic, one constant volume and one constant pressure
processes
Answers: a.
isentropic, isothermal, constant volume, constant pressure process
b.
two constant pressure, one constant
c.
two constant volume, one constant pressure, and one isothermal
process
d.
two isentropic, one constant volume and one constant pressure
processes
• Question 23
3.3 out of 3.3 points
Which of the following statements about entropy is false
Selected a.
Answer: entropy of a crystal at 0 F is zero
Answers: a.
entropy of a crystal at 0 F is zero
b.
entropy of a mixture is greater than that of its components under
the same condition
c.
net entropy change in any closed cycle is zero
d.
an irreversible process increases entropy of the universe
• Question 24
3.3 out of 3.3 points
The thermal efficiency of a dual cycle engine with fixed compression ratio and fixed
quantity of heat and with increase in pressure ratio, will
Selected Answer: d.
Increase
Answers: a.
Decrease
b.
Depends on other factors
c.
Remain same
d.
Increase
• Question 25
3.3 out of 3.3 points
The instrument that is used to check the state of charge of battery is called
Selected Answer: d.
Hydrometer
Answers: a.
Battery eliminator
b.
Anemometer
c.
Battery charger
d.
Hydrometer
• Question 26
3.3 out of 3.3 points
What do you call the first stage of crystal formation?
Selected Answer: a.
Nucleation
Answers: a.
Nucleation
b.
Foamation
c.
Separation
d.
Vortexing
• Question 27
3.3 out of 3.3 points
Ericsson cycle consists of the following processes:
Selected Answer: c.
Two adiabatic and two constant pressures
Answers: a.
Two isothermal & two constant volume processes
b.
Two isothermal and two constant isentropic
c.
Two adiabatic and two constant pressures
d.
Two isothermal and two constant pressure
• Question 28
3.3 out of 3.3 points
Superheated vapor behaves
Selected Answer: b.
approximately as a gas
Answers: a.
just as ordinary vapor
b.
approximately as a gas
c.
just as gas
d.
just as steam
• Question 29
3.3 out of 3.3 points
What is the most efficient thermodynamics cycle?
Selected Answer: b.
Carnot
Answers: a.
Rankine
b.
Carnot
c.
Brayton
d.
Diesel
• Question 30
3.3 out of 3.3 points
When a falling object reaches a speed at which the drag force equals its weight,
it has achieved:
Selected a.
Answer: A turbulent boundary layer
Answers: a.
A turbulent boundary layer
b.
Terminal velocity
c.
A laminar boundary layer
d.
Mach one
• Question 1
0 out of 3.3 points
What is the temperature when water and water vapor are in
equilibrium with the atmospheric pressure?
Selected Answer: [None Given]
Answers: a.
Steam point
b.
Freezing point
c.
Ice point
d.
Critical point
• Question 2
0 out of 3.3 points
Under ideal conditions, isothermal, isobaric, isochoric, and
adiabatic process are;
Selected Answer: [None Given]
Answers: a.
Static process
b.
Dynamic process
c.
Stable process
d.
Quasi – static process
• Question 3
0 out of 3.3 points
What is the true about the polytropic exponent n for a perfect
gas undergoing an isobaric process?
Selected Answer: [None Given]
Answers: a.
n=8
b.
n=0
c.
n >0
d.
n<0
• Question 4
0 out of 3.3 points
The process of separating two or more liquids means of the
difference in their boiling point.
Selected Answer: [None Given]
Answers: a.
Engler distillation
b.
Fractional crystallization
c.
Fractional distillation
d.
Gas scrubbing
• Question 5
0 out of 3.3 points
Which of the following is the color of iron when it its heated to
a highest temperature?
Selected Answer: [None Given]
Answers: a.
White
b.
Red
c.
Orange
d.
yellow
• Question 6
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if
the temperature is extremely high?
Selected [None Given]
Answer:
Answers: a.
Almost constant except for ferromagnetic
materials
b.
Decreases except for ferrous metals
c.
Approaches infinity
d.
Increases except for steel
• Question 7
0 out of 3.3 points
In the process of freeze drying, ice goes directly into water
vapor. What is the temperature at which this process can take
place?
Selected [None Given]
Answer:
Answers: a.
Above the triple point of water
b.
Any of the other choices, depending on the
pressure
c.
Below the triple point of water
d.
At the triple point of water
• Question 8
0 out of 3.3 points
One could expect the possibility of Froude number similarity in
all of the ff cases except:
Selected Answer: [None Given]
Answers: a.
Motion of a fluid jet
b.
Subsonic airfoils
c.
Flow over spillways
d.
Surge and flood waves
• Question 9
0 out of 3.3 points
In the hydro-electric power plant having a medium head and
using a Francis turbine, the turbine speed may be regulated
through:
Selected Answer: [None Given]
Answers: a.
Deflector gate
b.
Nozzle
c.
Wicket gate
d.
Forebay
• Question 10
0 out of 3.3 points
Rare gases such as helium, argon, krypton, xenon and radon that
are non-reactive are called
Selected Answer: [None Given]
Answers: a.
Non-reactants
b.
Residual gases
c.
Inert gases
d.
Stop gases
• Question 11
0 out of 3.3 points
The total energy in a compressible or incompressible fluid
across any section in a pipeline is a function of
Selected [None Given]
Answer:
Answers: a.
pressure, density, and velocity
b.
pressure and velocity
c.
flow energy, kinetic energy, height above datum
and internal energy
d.
pressure, density, velocity and viscosity
• Question 12
0 out of 3.3 points
The thermal resistance for one-dimensional steady conduction
heat transfer through cylindrical wall in the radial direction is
expresses in which of the following functions?
Selected Answer: [None Given]
Answers: a.
exponential
b.
trigonometric
c.
linear
d.
logarithmic
• Question 13
0 out of 3.3 points
The lowest portion to storage basin from where the water is not
drawn is:
Selected Answer: [None Given]
Answers: a.
Spring reserve
b.
Bottom storage
c.
Dead storage
d.
Sub-soil storage
• Question 14
0 out of 3.3 points
All processes below are irreversible except one. Which one?
Selected Answer: [None Given]
Answers: a.
Inelastic deformation
b.
Heat conduction
c.
Magnetization with hysteresis
d.
Elastic tension and release of a steel bar
• Question 15
0 out of 3.3 points
Is one whose temperature is below the saturation temperature
corresponding to its pressure.
Selected Answer: [None Given]
Answers: a.
superheated vapor
b.
saturated liquid
c.
subcooled liquid
d.
wet vapor
• Question 16
0 out of 3.3 points
Which of the following devices used to measure the discharge
of outflow from a vessel?
Selected Answer: [None Given]
Answers: a.
Pump head
b.
Orifice
c.
Pitot tube
d.
Obstruction meter
• Question 17
0 out of 3.3 points
Which one of the following is standard temperature and
pressure (STP)
Selected Answer: [None Given]
Answers: a.
0 C and 1 atm pressure
b.
0f and zero pressure
c.
0k and 1 atm pressure
d.
32 F and zero pressure
• Question 18
0 out of 3.3 points
A temperature above which a given gas cannot be liquefied:
Selected Answer: [None Given]
Answers: a.
Vaporization temperature
b.
Cryogenic temperature
c.
Absolute temperature
d.
Critical temperature
• Question 19
0 out of 3.3 points
Which of the following is the Stefan – Boltzmann constant?
Selected Answer: [None Given]
Answers: a.
7.67 x 10-9 W/m2K4
b.
5.67 x 10-8 W/m2K4
c.
4.78 x 10-10 W/m2K4
d.
5.77 x 10-7 W/m2K4
• Question 20
0 out of 3.3 points
What is the usual value of transmissivity for opaque
materials?
A.0
Selected Answer: [None Given]
Answers: a.
Infinity
b.
1
c.
Indeterminate
• Question 21
0 out of 3.3 points
Ericsson cycle has
Selected [None Given]
Answer:
Answers: a.
Two isothermal and two constant entropy
process
b.
Two isothermal and two constant volume
processes
c.
Two adiabatic, one constant volume and
constant pressure process
d.
Two isothermal and two constant pressure
processes
• Question 22
0 out of 3.3 points
What device is used to measure the amount of infrared
radiation in each portion of a person’s skin that is emitted?
Selected Answer: [None Given]
Answers: a.
Pyrometer
b.
Thermograph
c.
Potentiometer
d.
Thermometer
• Question 23
0 out of 3.3 points
The function of a turbine is to:
Selected Answer: [None Given]
Answers: a.
Transfer heat from one fluid to another
b.
Increase the total energy content of the flow
c.
Extract energy from the flow
d.
Exchange heat to increase energy to the flow
• Question 24
0 out of 3.3 points
The tendency of a pure compound to be composed of the same
elements combined in a definite proportion by mass
Selected Answer: [None Given]
Answers: a.
Avogadro’s law
b.
Le chatelier’s principle
c.
The law of definite proportions
d.
Boyle’s law
• Question 25
0 out of 3.3 points
It refers to the ratio of the rate of the heat transferred by
conduction to the rate of the energy stored.
Selected Answer: [None Given]
Answers: a.
Fourier number
b.
Reynolds number
c.
Prandtl number
d.
Biot number
• Question 26
0 out of 3.3 points
The temperature measurement in an ordinary thermometer
which has constant specific humidity:
Selected Answer: [None Given]
Answers: a.
Dew point temperature
b.
Critical temperature
c.
Wet bulb temperature
• Question 27
0 out of 3.3 points
The solid – liquid equilibrium of Mercury is at what
temperature?
Selected Answer: [None Given]
Answers: a.
-37.88°C
b.
38.87°C
c.
37.88°C
d.
-38.87°C
• Question 28
0 out of 3.3 points
A heat engine is supplied heat at rate of 30,000J/s gives an
output of 9kW. The thermal efficiency of the engine is:
Selected Answer: [None Given]
Answers: a.
55%
b.
43%
c.
50%
d.
30%
• Question 29
0 out of 3.3 points
“It is impossible to construct a heat engine that operates in a
cycle and receives a given quantity of heat from a high
temperature body and does an equal amount of work”. The
above statement is known as:
Selected Answer: [None Given]
Answers: a.
Gay Lussac’s law
b.
Joule-Thompson’s law
c.
Kelvin-Planck’s law
d.
Kinetic theory
• Question 30
0 out of 3.3 points
One could expect the possibility of Reynolds number similarity in all of the ff
cases except:
A.0
Selected Answer: [None Given]
Answers: a.
Infinity
b.
Indeterminate
c.
1
• Question 3
0 out of 3.3 points
The instrument that is used to check the state of charge of
battery is called
Selected Answer: [None Given]
Answers: a.
Battery charger
b.
Hydrometer
c.
Battery eliminator
d.
Anemometer
• Question 4
0 out of 3.3 points
Cryogenic temperature ranges from:
Selected Answer: [None Given]
Answers: a.
-200F to -400F
b.
-150F to -359F
c.
-100F to -300F
d.
-250F to -459F
• Question 5
0 out of 3.3 points
For glass wool thermal conductivity changes from sample to
sample due changes in:
Selected Answer: [None Given]
Answers: a.
All of the other choices
b.
Structure
c.
Composition
d.
Density
• Question 6
0 out of 3.3 points
When H20 in the products of combustion is in liquid form the
heating value is known as:
Selected Answer: [None Given]
Answers: a.
Low and medium heating value
b.
Average heating value
c.
Higher heating value
d.
Lower heating value
• Question 7
0 out of 3.3 points
What is the area under curve of a temperature entropy
diagram?
Selected Answer: [None Given]
Answers: a.
Heat
b.
Volume
c.
Work
d.
Entropy
• Question 8
0 out of 3.3 points
The fact that there is no resistance bodies moving through an
ideal(non-viscous) fluid is known as:
Selected Answer: [None Given]
Answers: a.
The 2nd law of thermodynamics
b.
D’alembert’s paradox
c.
Reynold’s analogy
d.
Newton’s 2nd law
• Question 9
0 out of 3.3 points
A system composed of ice and water at 0°C is said to be
_______________.
Selected Answer: [None Given]
Answers: a.
a multiphase material
b.
in thermal equilibrium
c.
all of the other choices
d.
in thermodynamic equilibrium
• Question 10
0 out of 3.3 points
A graph of enthalpy versus entropy for steam:
Selected Answer: [None Given]
Answers: a.
Maxwell diagram
b.
Steam table
c.
Mollier diagram
d.
Moody diagram
• Question 11
0 out of 3.3 points
Average pressure on a surface when a changing pressure
condition exist
Selected Answer: [None Given]
Answers: a.
Pressure drop
b.
Mean effective pressure
c.
Back pressure
d.
Partial pressure
• Question 12
0 out of 3.3 points
The number of exhaust manifolds in a V-8 engine is:
Selected Answer: [None Given]
Answers: a.
Two
b.
Four
c.
There is no exhaust manifold
d.
One
• Question 13
0 out of 3.3 points
What do you call the conversion technology that yields
electricity straight from sun light without the aid of a working
substance like gas or steam without the use of any
mechanical cycle?
Selected Answer: [None Given]
Answers: a.
Stirling cycle conversion
b.
Power conversion
c.
Solar thermal conversion
d.
Photovoltaic-energy conversion
• Question 14
0 out of 3.3 points
The number of protons in the nucleus of an atom or the number
of electrons in the orbit of an atom
Selected Answer: [None Given]
Answers: a.
atomic volume
b.
atomic number
c.
atomic mass
d.
atomic weight
• Question 15
0 out of 3.3 points
Which of the following types of flowmeters is most accurate?
Selected Answer: [None Given]
Answers: a.
stop valve
b.
Venturi tube
c.
Foam type
d.
Flow nozzle
• Question 16
0 out of 3.3 points
Convection is described of which of the following law:
Selected Answer: [None Given]
Answers: a.
Newton’s Law
b.
The Stefan – Boltzmann law
c.
Fourier’s Law
d.
The logarithmic mean temperature difference
• Question 17
0 out of 3.3 points
A valve in the carburetor of an internal combustion engines
which regulates the proportion of air gasoline vapors entering
the cylinder
Selected Answer: [None Given]
Answers: a.
Check valve
b.
Globe valve
c.
Gate valve
d.
Choke valve
• Question 18
0 out of 3.3 points
Equation of state for a single component can be any of the
following except:
Selected [None Given]
Answer:
Answers: a.
a mathematical expression defining a path between
states
b.
any relationship interrelating 3 or more state
functions
c.
relationship mathematically interrelating
thermodynamics properties of the material
d.
the ideal gas law
• Question 19
0 out of 3.3 points
The work done in an adiabatic process in a system:
Selected [None Given]
Answer:
Answers: a.
Is equal to the total net heat transfer plus the
entropy change
b.
Is equal to the change in total energy of closed
system plus entropy change
c.
Is equal to the change in total energy of closed
system plus net heat transfer
d.
Is equal to the change in total energy in a closed
system
• Question 20
0 out of 3.3 points
The equilibrium distance between elements in an ionic bond is
function of all the following except:
Selected Answer: [None Given]
Answers: a.
Ionic charge
b.
Temperature
c.
Coordination number
d.
Atomic weight
• Question 21
0 out of 3.3 points
The water hammer phenomenon is primarily what kind of fluid
mechanisms?
Selected Answer: [None Given]
Answers: a.
Incompressible
b.
Static (a phenomena independent of time)
c.
Compressible
d.
Dynamic (a time- dependent phenomena)
• Question 22
0 out of 3.3 points
A process in which the system departs from equilibrium state
only infinitesimally at every instant.
Selected Answer: [None Given]
Answers: a.
quasi-static process
b.
cyclic process
c.
irreversible process
d.
reversible process
• Question 23
0 out of 3.3 points
The Clapeyron’s equation is applicable to:
Selected [None Given]
Answer:
Answers: a.
A change of state
b.
A change of state when water and water vapor
are involved
c.
1 system in equilibrium
d.
A change of state when two phases are in
equilibrium
• Question 24
0 out of 3.3 points
The property of liquid in which they extend resistance to
angular or shear deformation is:
Selected Answer: [None Given]
Answers: a.
Viscosity
b.
Density
c.
Specific gravity
d.
Specific weight
• Question 25
0 out of 3.3 points
What is the value of the work done for a closed, reversible,
isometric system?
Selected Answer: [None Given]
Answers: a.
negative
b.
zero
c.
indeterminate
d.
positive
• Question 26
0 out of 3.3 points
At what particular condition that no more heat can that be
removed from a substance and the temperature can no longer
be lowered?
Selected Answer: [None Given]
Answers: a.
Ground zero
b.
Absolute zero
c.
Freezing point
d.
Critical point
• Question 27
0 out of 3.3 points
Which thermodynamic property best describes the molecular
activity of a substance?
Selected Answer: [None Given]
Answers: a.
Internal energy
b.
Entropy
c.
Enthalpy
d.
External energy
• Question 28
0 out of 3.3 points
Volumetric efficiency of a well designed engine may be in the
range of:
Selected Answer: [None Given]
Answers: a.
75 to 90%
b.
Below 30%
c.
30 to 50%
d.
60 to 75%
• Question 29
0 out of 3.3 points
At equal volume, at the same temperature and pressure
conditions. The gas contains the same number of molecules,
Selected Answer: [None Given]
Answers: a.
Dalton’s law
b.
Boyle’s law
c.
Avogadro’s law
d.
Charles law
• Question 30
0 out of 3.3 points
What is the use of a hydraulic jump?
Selected Answer: [None Given]
Answers: a.
Reduce the energy of flow
b.
Reduce the flow rate
c.
Reduce the velocity of flow
d.
Increase the flow rate
• Question 1
0 out of 3.3 points
Which of the following provides the basis for measuring
thermodynamic property of temperature?
Selected Answer: [None Given]
Answers: a.
third law of thermodynamics
b.
zeroth law of thermodynamics
c.
first law of thermodynamics
d.
second law of thermodynamics
• Question 2
0 out of 3.3 points
A Kaplan turbine is:
Selected Answer: [None Given]
Answers: a.
Low head axial flow turbine
b.
An outward flow reaction turbine
c.
A high head mixed flow turbine
d.
An inward flow impulse turbine
• Question 3
0 out of 3.3 points
The transmission of heat from one place to another by fluid
circulation between the spots of different temperatures is
called ______.
Selected Answer: [None Given]
Answers: a.
Conduction
b.
Convection
c.
Radiation
d.
Conservation
• Question 4
0 out of 3.3 points
Which of the following does not belong to the group?
Selected Answer: [None Given]
Answers: a.
Gas admission system
b.
Time injection system
c.
Mechanical injection system
d.
Air injection system
• Question 5
0 out of 3.3 points
In the process of freeze drying, ice goes directly into water
vapor. What is the temperature at which this process can take
place?
Selected [None Given]
Answer:
Answers: a.
Above the triple point of water
b.
Below the triple point of water
c.
At the triple point of water
d.
Any of the other choices, depending on the
pressure
• Question 6
0 out of 3.3 points
All of the following are thermodynamic properties
except_____________.
Selected Answer: [None Given]
Answers: a.
pressure
b.
modulus of elasticity
c.
temperature
d.
density
• Question 7
0 out of 3.3 points
What is meant by brake horsepower?
Selected [None Given]
Answer:
Answers: a.
Actual horsepower to delivered to the engine drive
shaft
b.
Work required to raise a weight of 33,000 lbs at a
height of one foot in one minute of time
c.
Final horse power delivered to the equipment
d.
Power delivered in the engine cylinder
• Question 8
0 out of 3.3 points
What usually happen when a vapor condenses into a liquid?
Selected Answer: [None Given]
Answers: a.
It boils with temperature less than 100°C
b.
Its temperature increases
c.
It generates heat
d.
It evolves heat
• Question 9
0 out of 3.3 points
The theory of changing heat into mechanical work.
Selected Answer: [None Given]
Answers: a.
Kinematics
b.
thermodynamics
c.
inertia
d.
kinetics
• Question 10
0 out of 3.3 points
Clog point of an oil refer to:
Selected [None Given]
Answer:
Answers: a.
the point of maximum contamination of oil
b.
the temperature at which oil solidifies
c.
the level of impurities beyond which oil ceases to
flow
d.
the temperature at which paraffin ad waxes in oil
start precipitating
• Question 11
0 out of 3.3 points
A temperature above which a given gas cannot be liquefied:
Selected Answer: [None Given]
Answers: a.
Absolute temperature
b.
Vaporization temperature
c.
Critical temperature
d.
Cryogenic temperature
• Question 12
0 out of 3.3 points
What is the chemical formula of an aromatic type of
hydrocarbon fuels?
Selected Answer: [None Given]
Answers: a.
CnH2n-6
b.
CnH2n
c.
CnH2n+2
d.
CnH2n-2
• Question 13
0 out of 3.3 points
Gudgeon pins are made of:
Selected Answer: [None Given]
Answers: a.
Same materials as that of piston
b.
Cast iron
c.
Hardened and ground steel
d.
None of these
• Question 14
0 out of 3.3 points
Venturi meters, pitot static gauges, orifice meters, flow
nozzles, and differential manometers all depend upon the
relationship between:
Selected Answer: [None Given]
Answers: a.
Pressure and mass flow
b.
Flow velocity and pressure
c.
Flow velocity and friction
d.
Friction and pressure
• Question 15
0 out of 3.3 points
For glass wool thermal conductivity changes from sample to
sample due changes in:
Selected Answer: [None Given]
Answers: a.
Density
b.
Structure
c.
Composition
d.
All of the other choices
• Question 16
0 out of 3.3 points
A branch system of pipes to carry waste emissions away from
the piston chambers of an internal combustion engine is called
Selected Answer: [None Given]
Answers: a.
Exhaust pipe
b.
Exhaust manifold
c.
Exhaust deflection pipe
d.
Exhaust nozzle
• Question 17
0 out of 3.3 points
What is the expression for heat of vaporization?
Selected Answer: [None Given]
Answers: a.
hf - hg
b.
hg
c.
hf
d.
hg - hf
• Question 18
0 out of 3.3 points
Prony brake is used for testing of:
Selected Answer: [None Given]
Answers: a.
High speed engines
b.
Engines having small flywheel
c.
Large engines
d.
Small engines
• Question 19
0 out of 3.3 points
The triple point of a substance is the temperature and
pressure at which:
Selected [None Given]
Answer:
Answers: a.
The solid and liquid phase are in equilibrium
b.
The solid liquid and gaseous phases are in the
equilibrium
c.
The solid does not melt, the liquid does not boil
and the gas does not condense
d.
The solid and gaseous phase are in equilibrium
• Question 20
0 out of 3.3 points
A theoretical gas which strictly follows boyle’s law and Charles
law of gasses.
Selected Answer: [None Given]
Answers: a.
universal gas
b.
perfect gas
c.
combined gas
d.
imperfect gas
• Question 21
0 out of 3.3 points
A chemical reaction in which heat is given off
Selected Answer: [None Given]
Answers: a.
Exothermic reaction
b.
Heat reaction
c.
Combustion reaction
d.
Endothermic reaction
• Question 22
0 out of 3.3 points
Which of the following statements about a path function is not
true?
Selected [None Given]
Answer:
Answers: a.
On a t-s diagram, it can represent heat
transferred
b.
On a p-v diagram, it can represent work done
c.
It represents values for p, v, t and s between
states that are path functions
d.
It is dependent on the path between states of
thermodynamic equilibrium
• Question 23
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if
the temperature is extremely high?
Selected [None Given]
Answer:
Answers: a.
Increases except for steel
b.
Approaches infinity
c.
Almost constant except for ferromagnetic
materials
d.
Decreases except for ferrous metals
• Question 24
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are
negligible or insignificant, the work input to an adiabatic
compressor is___________.
Selected Answer: [None Given]
Answers: a.
Zero
b.
Negligible
c.
Infinity
d.
Equal to change in enthalpy
• Question 25
0 out of 3.3 points
Clutch slippage while clutch is engaged is specially noticeable
Selected Answer: [None Given]
Answers: a.
During acceleration
b.
During idling
c.
During braking
d.
At low speed
• Question 26
0 out of 3.3 points
A heat engine is supplied heat at rate of 30,000J/s gives an
output of 9kW. The thermal efficiency of the engine is:
Selected Answer: [None Given]
Answers: a.
50%
b.
30%
c.
55%
d.
43%
• Question 27
0 out of 3.3 points
Which of the following statement about Van der Waals equation
is correct?
Selected [None Given]
Answer:
Answers: a.
It represents a straight line on PV versus V plot
b.
It is valid for all pressures and temperatures
c.
It has three roots of identical value at the critical
point
d.
The equation is valid for diatomic gases only.
• Question 28
0 out of 3.3 points
The heat exchanger used in an Ericsson cycle:
Selected Answer: [None Given]
Answers: a.
Regenerator
b.
Intercooler
c.
Recuperator
d.
Combustion chamber
• Question 29
0 out of 3.3 points
When hot soup was served in a cup during dinner an engineer
was so eager to drink it. Since it was hot he added cubes of ice to
cool the soup and stirred it. He noticed that dew starts to form
on the outermost surface of the cup. What is this temperature
equal to?
Selected Answer: [None Given]
Answers: a.
Equal to zero
b.
Equal to air’s dew point temperature
c.
Standard temperature
d.
Superheated temperature
• Question 30
0 out of 3.3 points
Which of the following conductivities where Sutherland
equation is used?
Selected Answer: [None Given]
Answers: a.
Thermal conductivities of liquids
b.
Thermal conductivities of gasses
c.
Thermal conductivities of solids
d.
Thermal conductivities of metal
• Question 1
0 out of 3.3 points
In heat exchanger design, one transfer unit implies:
Selected [None Given]
Answer:
Answers: a.
Condition when the change in temperature of one
steam is numerically equal to the average driving
force
b.
The section of heat exchanger where heat transfer
surface area has been one square meter
c.
One fluid which is exchanging with another fluid of
the same chemical composition
d.
The section of heat exchanger which will cause
temperature drop of one degree centigrade
• Question 2
0 out of 3.3 points
Which of the following provides the basis for measuring
thermodynamic property of temperature?
Selected Answer: [None Given]
Answers: a.
zeroth law of thermodynamics
b.
first law of thermodynamics
c.
second law of thermodynamics
d.
third law of thermodynamics
• Question 3
0 out of 3.3 points
Which of the following is not a unit of pressure
Selected Answer: [None Given]
Answers: a.
kg/m-s
b.
kg/m2
c.
bars
d.
Pa
• Question 4
0 out of 3.3 points
The residual oil left after distillation of gasoline and kerosene
from crude petroleum; yellow to brown oil, used as a diesel fuel
and for enriching water gas.
Selected Answer: [None Given]
Answers: a.
Gas oil
b.
LPG
c.
Gasoline oil
d.
Diesel oil
• Question 5
0 out of 3.3 points
It is the term used to describe the energy of the body that can
be transmitted in the form of heat.
Selected Answer: [None Given]
Answers: a.
enthalpy
b.
internal energy
c.
thermal energy
d.
entropy
• Question 6
0 out of 3.3 points
The Clapeyron’s equation is applicable to:
Selected [None Given]
Answer:
Answers: a.
A change of state
b.
A change of state when two phases are in
equilibrium
c.
1 system in equilibrium
d.
A change of state when water and water vapor
are involved
• Question 7
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Bankl
b.
Pelton
c.
Parson
d.
Hero
• Question 8
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: [None Given]
Answers: a.
Increasing and decreasing temperature
b.
Constant temperature
c.
Increasing temperature
d.
Decreasing temperature
• Question 9
0 out of 3.3 points
Otto cycle consists of
Selected [None Given]
Answer:
Answers: a.
two isentropic and two constant pressure
processes
b.
two adiabatic and two isothermal processes
c.
two isentropic and two constant volumes
processes
d.
two isothermal and two constant volume
processes
• Question 10
0 out of 3.3 points
Mechanical energy of pressure transformed into energy of heat:
Selected Answer: [None Given]
Answers: a.
Kinetic energy
b.
Heat exchanger
c.
Heat of compression
d.
Enthalpy
• Question 11
0 out of 3.3 points
A draft tube is a part of which power plants?
Selected Answer: [None Given]
Answers: a.
Hydro-electric power plant
b.
Diesel engine power plant
c.
Steam power plant
d.
Gas turbine power plant
• Question 12
0 out of 3.3 points
In a four stroke engine if a valve opens 25 before B.D.C. and close
10 after T.D.C the valve should be:
Selected Answer: [None Given]
Answers: a.
Exhaust valve
b.
Inlet valve
c.
Puppet valve
d.
Spring valve
• Question 13
0 out of 3.3 points
What is the true about the polytropic exponent n for a perfect
gas undergoing an isobaric process?
Selected Answer: [None Given]
Answers: a.
n >0
b.
n=8
c.
n=0
d.
n<0
• Question 14
0 out of 3.3 points
Dry air can be approximated as __% oxygen and __% nitrogen by
mole numbers.
Selected Answer: [None Given]
Answers: a.
21% and 79%
b.
30% and 70%
c.
70% and 30%
d.
79% and 21%
• Question 15
0 out of 3.3 points
The general chemical formula of a paraffin fuel is
Selected Answer: [None Given]
Answers: a.
CnH2n-6
b.
CnH2n-2
c.
CnH2n+2
d.
CnH2n
• Question 16
0 out of 3.3 points
The temperature potential between temperature at the two
ends of a heat exchanger are given by:
Selected Answer: [None Given]
Answers: a.
the Stefan-Boltzman law
b.
the logarithmic mean temperature difference
c.
Fourier’s law
d.
Kirchoff’s law
• Question 17
0 out of 3.3 points
What equation applies in the first law of thermodynamics for an
ideal gas in a reversible open steady-state system?
Selected Answer: [None Given]
Answers: a.
Q - W = U2 - U1
b.
Q - pdv = h2 - h1
c.
Q – Vdp = u2 - u1
d.
Q + vdp = h2 - h1
• Question 18
0 out of 3.3 points
The following terms are included in the first law of
thermodynamics for closed system except:
Selected Answer: [None Given]
Answers: a.
Kinetic energy
b.
Work done by or in the system
c.
Internal energy
d.
Heat transferred in and out of the system
• Question 19
0 out of 3.3 points
A liquid whose temperature is lower than saturation
temperature corresponding to the existing pressure:
Selected Answer: [None Given]
Answers: a.
Subcooled liquid
b.
Saturated liquid
c.
Pure liquid
d.
Compressed liquid
• Question 20
0 out of 3.3 points
The ignition coil acts as
Selected Answer: [None Given]
Answers: a.
An RC circuit
b.
A capacitor
c.
An inductor
d.
A step up transformer
• Question 21
0 out of 3.3 points
The heat of vaporization involves the change in enthalpy due
to:
Selected [None Given]
Answer:
Answers: a.
the energy released in a chemical reaction
b.
the change in phase is from solid to gas
c.
the change in phase from solid to liquid
d.
the change in phase in phase from liquid to
gas
• Question 22
0 out of 3.3 points
A laminated glass on cracking:
Selected Answer: [None Given]
Answers: a.
Bursts into granular pieces
b.
Breaks into the farm of crystals
c.
Sandwiched layer taps the fragments
d.
Bursts into sharp edged fragments
• Question 23
0 out of 3.3 points
The locus of elevation is:
Selected Answer: [None Given]
Answers: a.
Critical point
b.
Hydraulic gradient
c.
Energy gradient
d.
Friction
• Question 24
0 out of 3.3 points
On what plane is the Mollier diagram plotted
Selected Answer: [None Given]
Answers: a.
p-T
b.
p-V
c.
h-u
d.
h-s
• Question 25
0 out of 3.3 points
Energy changes are represented by all except which one of the
following
Selected Answer: [None Given]
Answers: a.
mCpdt
b.
dQ/T
c.
– ?Vdp
d.
Tds – Pdv
• Question 26
0 out of 3.3 points
Measure the diffuser’s ability to increase the pressure of the
fluid is:
Selected Answer: [None Given]
Answers: a.
Diffuser recovery factor
b.
Volume recovery factor
c.
Pressure recovery factor
d.
Speed recovery factor
• Question 27
0 out of 3.3 points
Which of the following statements is based on prevost theory
of heat exchanger?
Selected [None Given]
Answer:
Answers: a.
all bodies above absolute zero emit radiation
b.
heat transfer in most of the cases occurs by
combination of conduction, convection and
radiation
c.
the substance moves because of the decrease in
its density which is caused by increase in
temperature
d.
the substance moves because of the application of
the mechanical power such as that of a fan
• Question 28
0 out of 3.3 points
Which oil is more viscous?
Selected Answer: [None Given]
Answers: a.
SAE 80
b.
SAE 50
c.
SAE 40
d.
SAE 30
• Question 29
0 out of 3.3 points
The force of gravity on unit in volume is
Selected Answer: [None Given]
Answers: a.
Specific weight
b.
Specific volume
c.
Density
d.
Specific gravity
• Question 30
0 out of 3.3 points
Equation of state for a single component can be any of the
following except:
Selected [None Given]
Answer:
Answers: a.
relationship mathematically interrelating
thermodynamics properties of the material
b.
any relationship interrelating 3 or more state
functions
c.
the ideal gas law
d.
a mathematical expression defining a path between
states
• Question 1
0 out of 3.3 points
For the same heat input and same compression ratio:
Selected [None Given]
Answer:
Answers: a.
Both otto cycle and diesel cycle are equally
efficient
b.
Efficiency depends mainly on the working
substance
c.
Otto cycle is less efficient than diesel cycle
d.
None of the other choices is correct
• Question 2
0 out of 3.3 points
Heat is conducted in the direction of:
Selected Answer: [None Given]
Answers: a.
Constant temperature
b.
Increasing and decreasing temperature
c.
Decreasing temperature
d.
Increasing temperature
• Question 3
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Hero
b.
Parson
c.
Bankl
d.
Pelton
• Question 4
0 out of 3.3 points
What is the chemical formula of an aromatic type of
hydrocarbon fuels?
Selected Answer: [None Given]
Answers: a.
CnH2n+2
b.
CnH2n-2
c.
CnH2n-6
d.
CnH2n
• Question 5
0 out of 3.3 points
When a system deviates infinitesimally from equilibrium at
every instant of its state, it is undergoing:
Selected Answer: [None Given]
Answers: a.
isobaric process
b.
isometric process
c.
cyclic process
d.
quasi-static process
• Question 6
0 out of 3.3 points
For a saturated vapor, the relationship between temperature
and pressure is given by:
Selected Answer: [None Given]
Answers: a.
the perfect gas law
b.
Van der Waal’s equation
c.
a Viral equation of state
d.
the steam stable
• Question 7
0 out of 3.3 points
A theoretical body which when heated to incandescence
would emit a continuous light-ray spectrum.
Selected Answer: [None Given]
Answers: a.
Black body radiation
b.
Blue body
c.
Black body
d.
White body
• Question 8
0 out of 3.3 points
In the process of freeze drying, ice goes directly into water
vapor. What is the temperature at which this process can take
place?
Selected [None Given]
Answer:
Answers: a.
Below the triple point of water
b.
At the triple point of water
c.
Above the triple point of water
d.
Any of the other choices, depending on the
pressure
• Question 9
0 out of 3.3 points
Absolute temperature on the Fahrenheit scale are called:
Selected Answer: [None Given]
Answers: a.
Absolute Fahrenheit
b.
Degrees Rankine
c.
Degrees Kelvin
d.
Absolute Celsius
• Question 10
0 out of 3.3 points
The first and second laws of thermodynamics are:
Selected Answer: [None Given]
Answers: a.
Momentum equations
b.
Energy equations
c.
Continuity equations
d.
Equations of state
• Question 11
0 out of 3.3 points
The tendency of a pure compound to be composed of the same
elements combined in a definite proportion by mass
Selected Answer: [None Given]
Answers: a.
Le chatelier’s principle
b.
Boyle’s law
c.
Avogadro’s law
d.
The law of definite proportions
• Question 12
0 out of 3.3 points
Dirt or gum in fuel nozzle or jets can produce:
Selected Answer: [None Given]
Answers: a.
Lack of engine power
b.
Smoky black exhaust
c.
Excessive fuel consumption
d.
White exhaust
• Question 13
0 out of 3.3 points
The matching of scale and full-scale results for a fluid dynamic
phenomena involving compressible fluids requires equality of:
Selected Answer: [None Given]
Answers: a.
Mach number
b.
Froude number
c.
Cauchy number
d.
Reynolds number
• Question 14
0 out of 3.3 points
All of the following are components of a chemical elements
except:
Selected Answer: [None Given]
Answers: a.
Neutrons
b.
Protons
c.
Electrons
d.
Ions
• Question 15
0 out of 3.3 points
The absolute zero on the Celsius scale is at
Selected Answer: [None Given]
Answers: a.
-459.7 degree F
b.
-273.15 degree C
c.
459.7 degree F
d.
273.15 degree C
• Question 16
0 out of 3.3 points
All of the following processes are irreversible except.
Selected Answer: [None Given]
Answers: a.
Current flow through an electrical resistance.
b.
chemical reactions
c.
diffusion
d.
an isentropic compression of a perfect gas.
• Question 17
0 out of 3.3 points
An instrument commonly used in most research and
engineering laboratories because it is small and fast among
the other thermometers.
Selected Answer: [None Given]
Answers: a.
Gas thermometer
b.
Mercury thermometer
c.
Thermocouple
d.
Liquid-in-glass thermometer
• Question 18
0 out of 3.3 points
A Francis turbine has what flow?
Selected Answer: [None Given]
Answers: a.
Outward flow reaction
b.
Outward flow impulse
c.
Inward flow impulse
d.
Inward flow reaction
• Question 19
0 out of 3.3 points
The extension and compression of helical spring is an example of
what process?
Selected Answer: [None Given]
Answers: a.
Reversible process
b.
Adiabatic process
c.
Thermodynamic process
d.
Isothermal process
• Question 20
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
Variable pressures
b.
Complex pressures
c.
Average pressures
d.
Positive and negative pressures
• Question 21
0 out of 3.3 points
During idling in compression ignition engine the air fuel ratio
may be of the order of:
Selected Answer: [None Given]
Answers: a.
30
b.
150
c.
200
d.
100
• Question 22
0 out of 3.3 points
In the absence of any heat and work interactions and any
changes in potential energy, the stagnation enthalpy of a fluid
remains constant during
Selected Answer: [None Given]
Answers: a.
Unsteady flow
b.
Steady flow
c.
Turbulent flow
d.
Variable flow
• Question 23
0 out of 3.3 points
A device whose primary function is to meter the flow of
refrigerant to the evaporator
Selected Answer: [None Given]
Answers: a.
Thermostatic expansion valve
b.
Equalizer
c.
Crossover valve
d.
Sniffer valve
• Question 24
0 out of 3.3 points
In an oxidation – reduction chemical reaction, all of the following
occur except:
Selected Answer: [None Given]
Answers: a.
Nuclear fusion
b.
The exchange of electrons between elements
c.
Elements becoming more positive
d.
Elements becoming more negative
• Question 25
0 out of 3.3 points
Most commercially available petroleum lubricating oil
deteriorates staring from operating temperature of:
Selected Answer: [None Given]
Answers: a.
150 F
b.
250 F
c.
300 F
d.
200 F
• Question 26
0 out of 3.3 points
The following properties are different for isomers of the same
chemical compound except
Selected Answer: [None Given]
Answers: a.
Specific heat
b.
Density
c.
Melting point
d.
Number of atoms in a mole of each isomers
• Question 27
0 out of 3.3 points
An Orsat’s apparatus is used for
Selected Answer: [None Given]
Answers: a.
Volumetric analysis of the flue gas
b.
Smoke density analysis of the flue gas
c.
Gravimetric analysis of the flue gas
d.
All of the other choices
• Question 28
0 out of 3.3 points
Which of the following is the color of iron when it its heated to
a highest temperature?
Selected Answer: [None Given]
Answers: a.
White
b.
Orange
c.
Red
d.
yellow
• Question 29
0 out of 3.3 points
When the entire heat exchanger is selected as control volume,
heat becomes _____.?
Selected Answer: [None Given]
Answers: a.
Unity
b.
Undefined
c.
Zero
d.
Indeterminate
• Question 30
0 out of 3.3 points
When the water in the products of combustion is in the vapor
state, the heating value is:
Selected Answer: [None Given]
Answers: a.
Average heating value
b.
Higher heating value
c.
Lower heating value
d.
Gross calorific value
• Question 1
0 out of 3.3 points
Sublimation refers to:
Selected [None Given]
Answer:
Answers: a.
The vaporization of solid without first becoming
liquid
b.
The vaporization of a liquid
c.
The melting of a solid
d.
The condensation of a gas into liquid
• Question 2
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Bankl
b.
Hero
c.
Parson
d.
Pelton
• Question 3
0 out of 3.3 points
What is the most efficient thermodynamics cycle?
Selected Answer: [None Given]
Answers: a.
Carnot
b.
Brayton
c.
Rankine
d.
Diesel
• Question 4
0 out of 3.3 points
One of the reasons for insulating the pipes is:
Selected Answer: [None Given]
Answers: a.
Capacity to withstand pressure is increased
b.
Heat loss from the surface is minimized
c.
They may not break under pressure
d.
There is minimum corrosion
• Question 5
0 out of 3.3 points
An instrument commonly used in most research and
engineering laboratories because it is small and fast among
the other thermometers.
Selected Answer: [None Given]
Answers: a.
Gas thermometer
b.
Mercury thermometer
c.
Liquid-in-glass thermometer
d.
Thermocouple
• Question 6
0 out of 3.3 points
In a vehicle the most probable cause for hard steering may be:
Selected Answer: [None Given]
Answers: a.
Tie rod ends tight
b.
Low tire pressure
c.
Any of the other choices
d.
Bent wheel spindle
• Question 7
0 out of 3.3 points
U + pV is a quantity called:
Selected Answer: [None Given]
Answers: a.
enthalpy
b.
shaft work
c.
internal energy
d.
entropy
• Question 8
0 out of 3.3 points
In Maxwell’s theory for thermal conductivity of gases and
vapors, which of the following is the value of “a” for triatomic
gases?
Selected Answer: [None Given]
Answers: a.
1.7
b.
1.3
c.
2.8
d.
2.4
• Question 9
0 out of 3.3 points
What do you call the passing of heat energy from molecule to
molecule through a substance?
Selected Answer: [None Given]
Answers: a.
Convection
b.
Conduction
c.
Conservation
d.
Radiation
• Question 10
0 out of 3.3 points
The locus of elevation is:
Selected Answer: [None Given]
Answers: a.
Critical point
b.
Hydraulic gradient
c.
Energy gradient
d.
Friction
• Question 11
0 out of 3.3 points
The instrument that is used to check the state of charge of
battery is called
Selected Answer: [None Given]
Answers: a.
Anemometer
b.
Battery charger
c.
Battery eliminator
d.
Hydrometer
• Question 12
0 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called
_________.
Selected Answer: [None Given]
Answers: a.
Source
b.
Cold reservoir
c.
Heat reservoir
d.
Sink
• Question 13
0 out of 3.3 points
Which of the following relations defines enthalpy?
Selected Answer: [None Given]
Answers: a.
h = pV + T
b.
h = u + PV
c.
h = u+P/V
d.
h = u + p/t
• Question 14
0 out of 3.3 points
What is the SI unit of force
Selected Answer: [None Given]
Answers: a.
dyne
b.
newton
c.
pound
d.
kilogram
• Question 15
0 out of 3.3 points
A theoretical body which when heated to incandescence
would emit a continuous light-ray spectrum.
Selected Answer: [None Given]
Answers: a.
Black body radiation
b.
Black body
c.
Blue body
d.
White body
• Question 16
0 out of 3.3 points
Mechanical energy of pressure transformed into energy of heat:
Selected Answer: [None Given]
Answers: a.
Enthalpy
b.
Kinetic energy
c.
Heat of compression
d.
Heat exchanger
• Question 17
0 out of 3.3 points
Which of the following is the usual geometric view factor for a
black body?
Selected Answer: [None Given]
Answers: a.
Infinity
b.
One
c.
Zero
d.
Indeterminate
• Question 18
0 out of 3.3 points
Which of the following is a characteristic of an impulse
turbine?
Selected Answer: [None Given]
Answers: a.
Steam reversing direction
b.
Steam striking blades on angle
c.
Steam striking blades at zero angle
d.
No steam reaction to velocity
• Question 19
0 out of 3.3 points
The type of filter where the filtering elements is replaceable
Selected Answer: [None Given]
Answers: a.
Filer with element
b.
Paper edge filter
c.
Metal edge filter
d.
Pressure filter
• Question 20
0 out of 3.3 points
Another name for liquid valve is:
Selected Answer: [None Given]
Answers: a.
Freon valve
b.
Shut-off valve
c.
Master valve
d.
King valve
• Question 21
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if
the temperature is extremely high?
Selected [None Given]
Answer:
Answers: a.
Approaches infinity
b.
Almost constant except for ferromagnetic
materials
c.
Increases except for steel
d.
Decreases except for ferrous metals
• Question 22
0 out of 3.3 points
Air that controls the rat of combustion in the combustion
chamber is known as:
Selected Answer: [None Given]
Answers: a.
Primary air
b.
Control air
c.
Excess air
d.
Secondary air
• Question 23
0 out of 3.3 points
Piston rings are made of:
Selected Answer: [None Given]
Answers: a.
Alloy steel
b.
Copper
c.
Cast iron
d.
Carbon steel
• Question 24
0 out of 3.3 points
1 watt...
Selected Answer: [None Given]
Answers: a.
1 Nm/hr
b.
1kNm/hr
c.
1Nm/s
d.
1Nm/min
• Question 25
0 out of 3.3 points
Thermal conductivity of wood depends on which of the
following:
Selected Answer: [None Given]
Answers: a.
All of the other choices
b.
Temperature
c.
Moisture
d.
Density
• Question 26
0 out of 3.3 points
If a substance temperature is greater than the saturation
temperature, the substance is a ________.
Selected Answer: [None Given]
Answers: a.
subcooled liquid
b.
saturated vapor
c.
wet vapor
d.
superheated vapor
• Question 27
0 out of 3.3 points
A Kaplan turbine is:
Selected Answer: [None Given]
Answers: a.
A high head mixed flow turbine
b.
An inward flow impulse turbine
c.
Low head axial flow turbine
d.
An outward flow reaction turbine
• Question 28
0 out of 3.3 points
Exhaust stroke of gasoline engine is also known as
Selected Answer: [None Given]
Answers: a.
Knocking
b.
Scavenging
c.
Choking
d.
Supercharging
• Question 29
0 out of 3.3 points
“It is impossible to construct a heat engine that operates in a
cycle and receives a given quantity of heat from a high
temperature body and does an equal amount of work”. The
above statement is known as:
Selected Answer: [None Given]
Answers: a.
Gay Lussac’s law
b.
Joule-Thompson’s law
c.
Kelvin-Planck’s law
d.
Kinetic theory
• Question 30
0 out of 3.3 points
A valve in the carburetor of an internal combustion engines
which regulates the proportion of air gasoline vapors entering
the cylinder
Selected Answer: [None Given]
Answers: a.
Globe valve
b.
Gate valve
c.
Choke valve
d.
Check valve
• Question 1
0 out of 3.3 points
In conduction heat transfer, what happens to the heat transfer
per unit time when the thermal conductivity decreases?
Selected [None Given]
Answer:
Answers: a.
the heat flow will increase
b.
the heat flow remains constant
c.
the heat flow will partially increase and then will
decrease
d.
the heat flow will decrease
• Question 2
0 out of 3.3 points
According to Clausius statement
Selected [None Given]
Answer:
Answers: a.
Heat cannot flow from cold substance to hot
substance
b.
A and C
c.
Heat can flow from cold substance to substance
with the aid of external work
d.
Heat flow from hot surface to cold surface unaided
• Question 3
0 out of 3.3 points
The property of liquid in which they extend resistance to
angular or shear deformation is:
Selected Answer: [None Given]
Answers: a.
Density
b.
Specific gravity
c.
Specific weight
d.
Viscosity
• Question 4
0 out of 3.3 points
In convection heat transfer, what mechanism heat transfer
where the fluid moves due to the decrease in its density
caused by increase in temperature?
Selected Answer: [None Given]
Answers: a.
Forced convection
b.
Radial convection
c.
Natural convection
d.
Density convection
• Question 5
0 out of 3.3 points
An instrument commonly used in most research and
engineering laboratories because it is small and fast among
the other thermometers.
Selected Answer: [None Given]
Answers: a.
Gas thermometer
b.
Mercury thermometer
c.
Liquid-in-glass thermometer
d.
Thermocouple
• Question 6
0 out of 3.3 points
An impulse turbine are used for:
Selected Answer: [None Given]
Answers: a.
Medium head
b.
Low head
c.
High head
d.
Very low head
• Question 7
0 out of 3.3 points
All processes below are irreversible except one. Which one?
Selected Answer: [None Given]
Answers: a.
Heat conduction
b.
Elastic tension and release of a steel bar
c.
Inelastic deformation
d.
Magnetization with hysteresis
• Question 8
0 out of 3.3 points
A hot block is cooled by blowing cool air over its top surface.
The heat that is first transferred to the air layer close to the
block is by conduction. It is eventually carried away from the
surface by ______.
Selected Answer: [None Given]
Answers: a.
Radiation
b.
Thermal radiation
c.
Convection
d.
Conduction
• Question 9
0 out of 3.3 points
Flows through multi-loop systems may be computed by:
Selected [None Given]
Answer:
Answers: a.
Trial and error
b.
The hardy-cross method
c.
All of the other choices
d.
Any closed- form solution of simultaneous
equations
• Question 10
0 out of 3.3 points
Which of the following is not a prefix used in naming isomers?
Selected Answer: [None Given]
Answers: a.
Bi
b.
Meta
c.
Para
d.
Cis
• Question 11
0 out of 3.3 points
All of the following processes are irreversible except.
Selected Answer: [None Given]
Answers: a.
Current flow through an electrical resistance.
b.
an isentropic compression of a perfect gas.
c.
chemical reactions
d.
diffusion
• Question 12
0 out of 3.3 points
When a certain mass of fluid in particular state passes through a
series of process and returns to its initial state, it undergoes a:
Selected Answer: [None Given]
Answers: a.
revolution
b.
rotation
c.
process
d.
cycle
• Question 13
0 out of 3.3 points
Measure the diffuser’s ability to increase the pressure of the
fluid is:
Selected Answer: [None Given]
Answers: a.
Diffuser recovery factor
b.
Pressure recovery factor
c.
Speed recovery factor
d.
Volume recovery factor
• Question 14
0 out of 3.3 points
What do you call the effectiveness of a body as a thermal
radiator at a given temperature?
Selected Answer: [None Given]
Answers: a.
Conductivity
b.
Absorptivity
c.
Reflectivity
d.
Emissivity
• Question 15
0 out of 3.3 points
The law that state “Entropy of all perfect crystalline solid is
zero at absolute zero temperature”:
Selected Answer: [None Given]
Answers: a.
First law of thermodynamics
b.
Third law of thermodynamics
c.
Zeroth law of thermodynamics
d.
Second law of thermodynamics
• Question 16
0 out of 3.3 points
What is referred by control volume?
Selected Answer: [None Given]
Answers: a.
reversible process only
b.
fixed region in space
c.
closed system
d.
an isolated system
• Question 17
0 out of 3.3 points
When changes in kinetic energy of a compressed gas are
negligible or insignificant, the work input to an adiabatic
compressor is___________.
Selected Answer: [None Given]
Answers: a.
Equal to change in enthalpy
b.
Infinity
c.
Negligible
d.
Zero
• Question 18
0 out of 3.3 points
Which of the following is used for fighter jets?
Selected Answer: [None Given]
Answers: a.
Turbopop
b.
Turbojet
c.
Pulsejet
d.
Ramjet
• Question 19
0 out of 3.3 points
A passive restraint device consisting of bags in front of the
driver and passenger
Selected Answer: [None Given]
Answers: a.
Air bag
b.
Air buoy
c.
Air balloon
d.
Air duct
• Question 20
0 out of 3.3 points
Form of energy associated with the kinetic energy of the random
motion of large number of molecules.
Selected Answer: [None Given]
Answers: a.
heat
b.
internal enegy
c.
kinetic energy
d.
heat of fusion
• Question 21
0 out of 3.3 points
Odometer is
Selected [None Given]
Answer:
Answers: a.
An instrument used for BHP measurement
b.
An instrument used for distance measurement
c.
An instrument used for measurement of fuel
consumption
d.
An instrument that indicates the condition of the
battery
• Question 22
0 out of 3.3 points
For glass wool thermal conductivity changes from sample to
sample due changes in:
Selected Answer: [None Given]
Answers: a.
Structure
b.
Density
c.
All of the other choices
d.
Composition
• Question 23
0 out of 3.3 points
The number of protons in the nucleus of an atom or the number
of electrons in the orbit of an atom
Selected Answer: [None Given]
Answers: a.
atomic volume
b.
atomic weight
c.
atomic number
d.
atomic mass
• Question 24
0 out of 3.3 points
Kinematics and dynamic viscosity vary from each other only by
a factor equal to the:
Selected Answer: [None Given]
Answers: a.
Fluid density
b.
Pressure
c.
Temperature
d.
Specific gas constant
• Question 25
0 out of 3.3 points
According to Prevost theory of heat exchange,
Selected [None Given]
Answer:
Answers: a.
All bodies above absolute zero emit radiation
b.
Heat transfer in most cases occurs by
combination of conduction, convection and
radiation.
c.
Heat transfer by radiation needs no medium.
d.
It is impossible to transfer heat from low
temperature source to high temperature source.
• Question 26
0 out of 3.3 points
The heat transfer by convection occurs in which of the
following?
Selected Answer: [None Given]
Answers: a.
Only in gases and liquids
b.
Only in gases
c.
Only in liquids
d.
Only in gases and solids
• Question 27
0 out of 3.3 points
One of the consequences of Einstein’s theory relatively is that
mass may be converted into energy and energy into mass, the
relation being given by the famous equation, E = mc². What is
the value of the speed of light c?
Selected Answer: [None Given]
Answers: a.
2.7797 x 1010 cm/s
b.
2.9979 x 1010 cm/s
c.
2.9979 x 1010 cm/s
d.
2.7797 x 1010 cm/s
• Question 28
0 out of 3.3 points
A compound pressure gauge is used to measure:
Selected Answer: [None Given]
Answers: a.
variable pressure
b.
complex pressure
c.
compound pressure
d.
positive and negative pressure
• Question 29
0 out of 3.3 points
It is the term used to describe the energy of the body that can
be transmitted in the form of heat.
Selected Answer: [None Given]
Answers: a.
entropy
b.
thermal energy
c.
enthalpy
d.
internal energy
• Question 30
0 out of 3.3 points
Heat exchange process where in the product of pressure and
volume remains constant called:
Selected Answer: [None Given]
Answers: a.
Isentropic process
b.
Heat exchange process
c.
Hyperbolic process
d.
Throttling process
• Question 1
0 out of 3.3 points
In turbine installation, the air is removed from condenser by
Selected Answer: [None Given]
Answers: a.
Air injector
b.
Air jet
c.
Air ejector
d.
Air pump
• Question 2
0 out of 3.3 points
The heat transfer term in the first law of thermodynamics may
be due to any of the following except:
Selected [None Given]
Answer:
Answers: a.
Conduction
b.
Radiation
c.
Convection
d.
Internal heat generation(e.g., chemical
reaction)
• Question 3
0 out of 3.3 points
The device that is used to measure the clearance between the
valve and tappet of an internal combustion engine is measured
by using:
Selected Answer: [None Given]
Answers: a.
Micrometer
b.
Feeler gauge
c.
Snap gauge
d.
Slip gauge
• Question 4
0 out of 3.3 points
The mean effective pressure of a diesel cycle having fixed
compression ratio will increase if cut off is:
Selected Answer: [None Given]
Answers: a.
Independent of compression ratio
b.
Increased
c.
Decreased
d.
Depends on other factor
• Question 5
0 out of 3.3 points
Which of the engine is used for fighter bomber?
Selected Answer: [None Given]
Answers: a.
ramjet
b.
rockets
c.
pulsejet
d.
turbojet
• Question 6
0 out of 3.3 points
The radiation from flames is having
Selected [None Given]
Answer:
Answers: a.
Continuous radiation from burning soot particles
of microscopic and submicroscopic dimensions
b.
All of the other choices
c.
Radiation from suspended larger particles of coal,
coke, or ash contributing to flame luminosity
d.
Infrared radiation from water vapor and carbon
dioxide
• Question 7
0 out of 3.3 points
What is the expression for heat of vaporization?
Selected Answer: [None Given]
Answers: a.
hf - hg
b.
hf
c.
hg
d.
hg - hf
• Question 8
0 out of 3.3 points
At what particular condition that no more heat can that be
removed from a substance and the temperature can no longer
be lowered?
Selected Answer: [None Given]
Answers: a.
Freezing point
b.
Ground zero
c.
Absolute zero
d.
Critical point
• Question 9
0 out of 3.3 points
The thermal efficiency of gas vapor cycle as compared to the
steam turbine or gas turbine:
Selected Answer: [None Given]
Answers: a.
Not comparable
b.
Greater than
c.
Equal
d.
Less than
• Question 10
0 out of 3.3 points
Which of the following is the basis for Bernoulli’s law for fluid
flow?
Selected Answer: [None Given]
Answers: a.
the continuity equation
b.
the principle of conservation of energy
c.
fourier’s law
d.
the principle of conservation of mass
• Question 11
0 out of 3.3 points
When a certain mass of fluid in particular state passes through a
series of process and returns to its initial state, it undergoes a:
Selected Answer: [None Given]
Answers: a.
process
b.
cycle
c.
revolution
d.
rotation
• Question 12
0 out of 3.3 points
In the hydro-electric power plant having a medium head and
using a Francis turbine, the turbine speed may be regulated
through:
Selected Answer: [None Given]
Answers: a.
Forebay
b.
Nozzle
c.
Wicket gate
d.
Deflector gate
• Question 13
0 out of 3.3 points
One Newton-meter is equal to
Selected Answer: [None Given]
Answers: a.
1 Calorie
b.
1 Joule
c.
1 Btu
d.
1 Ergs
• Question 14
0 out of 3.3 points
Exhaust stroke of gasoline engine is also known as
Selected Answer: [None Given]
Answers: a.
Supercharging
b.
Choking
c.
Knocking
d.
Scavenging
• Question 15
0 out of 3.3 points
Which of the following is the emissivity of a white body?
Selected Answer: [None Given]
Answers: a.
1
b.
zero
c.
0.5
d.
0<e<1
• Question 16
0 out of 3.3 points
Why are metals good conductors of heat?
Selected Answer: [None Given]
Answers: a.
Because their atoms are relatively far apart
b.
Because they have reflecting surfaces
c.
Because they contain free electrons
d.
Because their atoms collide infrequently
• Question 17
0 out of 3.3 points
One of the consequences of Einstein’s theory relatively is that
mass may be converted into energy and energy into mass, the
relation being given by the famous equation, E = mc². What is
the value of the speed of light c?
Selected Answer: [None Given]
Answers: a.
2.7797 x 1010 cm/s
b.
2.7797 x 1010 cm/s
c.
2.9979 x 1010 cm/s
d.
2.9979 x 1010 cm/s
• Question 18
0 out of 3.3 points
Odometer is
Selected [None Given]
Answer:
Answers: a.
An instrument used for distance measurement
b.
An instrument used for measurement of fuel
consumption
c.
An instrument used for BHP measurement
d.
An instrument that indicates the condition of the
battery
• Question 19
0 out of 3.3 points
The matching of scale model and full-scale results for a fluid
dynamic phenomena with a free surface requires equality of:
Selected Answer: [None Given]
Answers: a.
Froude number
b.
Reynolds number
c.
Weber number
d.
Cauchy number
• Question 20
0 out of 3.3 points
The Carnot refrigeration cycle includes all of the following
processes except:
Selected Answer: [None Given]
Answers: a.
Isentropic expansion
b.
Isothermal heating
c.
Isenthalpic expansion
d.
Isentropic compression
• Question 21
0 out of 3.3 points
What refers to an ideal body that absorbs all of the radiant
energy that intrudes on it and also emits the maximum
possible energy when acting as a source?
Selected Answer: [None Given]
Answers: a.
Red hot body
b.
Gray body
c.
White body
d.
Black body
• Question 22
0 out of 3.3 points
A finely divided carbon deposit by the smoke or flame is called
Selected Answer: [None Given]
Answers: a.
All of the choices
b.
Residue
c.
Soot
d.
Fly ash
• Question 23
0 out of 3.3 points
A reservoir that supplies energy in the form of heat is called:
Selected Answer: [None Given]
Answers: a.
Heat reservoir
b.
Source
c.
Sink
d.
Cold reservoir
• Question 24
0 out of 3.3 points
In pumped storage plant
Selected [None Given]
Answer:
Answers: a.
Downstream water is pumped upstream during
offload periods
b.
Water is stored by pumping to high pressures
c.
Power is produced by pumps
d.
Pressure accumulators are used
• Question 25
0 out of 3.3 points
The solid – liquid equilibrium of Platinum is at what
temperature?
Selected Answer: [None Given]
Answers: a.
3730°C
b.
3073°C
c.
3370°C
d.
3037°C
• Question 26
0 out of 3.3 points
Which of the following is the primary function of a thermal
radiator?
Selected [None Given]
Answer:
Answers: a.
To transfer heat with or without a medium
b.
To transferring the heat by using moving fluids
c.
To transfer heat from hot to cold body by using a
forced-draft fan
d.
To transfer heat by allowing molecules to vibrate
one to another
• Question 27
0 out of 3.3 points
The device for smoothing out the power impulses from the
engine is known as:
Selected Answer: [None Given]
Answers: a.
Fly wheel
b.
Clutch
c.
Gear box
d.
differential
• Question 28
0 out of 3.3 points
In the flow process, neglecting kinetic and potential energies, the
integral of Vdp represent what?
Selected Answer: [None Given]
Answers: a.
Shaft work
b.
heat transfer
c.
enthalpy change
d.
flow energy
• Question 29
0 out of 3.3 points
Which of the following cycles has two isothermal and two
constant volume processes?
Selected Answer: [None Given]
Answers: a.
Diesel cycle
b.
Ericsson cycle
c.
Joule cycle
d.
Stirling cycle
• Question 30
0 out of 3.3 points
To measure the clearance between the valve and tappet of an
automobile engine we use a
Selected Answer: [None Given]
Answers: a.
Pneumatic gauge
b.
Feeler gauge
c.
Vernier scale
d.
Slip gauge
• Question 1
0 out of 3.3 points
What happens to the heat transferred radially across insulated
pipe per unit area?
Selected Answer: [None Given]
Answers: a.
The heat will flow at constant rate
b.
Partially increases from pipe wall to insulated
surface
c.
Decrease from pipe wall to insulated surface
d.
Decrease with the increase in thermal
conductivity
• Question 2
0 out of 3.3 points
Thermal conduction is described by:
Selected Answer: [None Given]
Answers: a.
Newton’s Law
b.
The Stefan – Boltzmann law
c.
Fourier’s Law
d.
The logarithmic mean temperature difference
• Question 3
0 out of 3.3 points
A theoretical gas which strictly follows boyle’s law and Charles
law of gasses.
Selected Answer: [None Given]
Answers: a.
perfect gas
b.
universal gas
c.
imperfect gas
d.
combined gas
• Question 4
0 out of 3.3 points
A thermodynamic system that operates continuously with only
energy (heat and work) crossing its boundaries; its boundaries
are impervious to the flow of mass.
Selected Answer: [None Given]
Answers: a.
Steady flow work
b.
Heat engine
c.
Ericson engine
d.
Stirling engine
• Question 5
0 out of 3.3 points
At what temperature wherein an oil of any grade becomes
cloudy and it freezes, thus its application is limited
Selected Answer: [None Given]
Answers: a.
Freezing point
b.
Pour point
c.
Flash point
d.
Cold point
• Question 6
0 out of 3.3 points
For pure metals, what happens to the thermal conductivity if
the temperature is extremely high?
Selected [None Given]
Answer:
Answers: a.
Almost constant except for ferromagnetic
materials
b.
Increases except for steel
c.
Approaches infinity
d.
Decreases except for ferrous metals
• Question 7
0 out of 3.3 points
Why are metals good conductors of heat?
Selected Answer: [None Given]
Answers: a.
Because they contain free electrons
b.
Because their atoms are relatively far apart
c.
Because their atoms collide infrequently
d.
Because they have reflecting surfaces
• Question 8
0 out of 3.3 points
A Bell-Coleman cycle is a reversed:
Selected Answer: [None Given]
Answers: a.
Carnot cycle
b.
Stirling cycle
c.
Brayton cycle
d.
Joule cycle
• Question 9
0 out of 3.3 points
The total energy in a compressible or incompressible fluid
across any section in a pipeline is a function of
Selected [None Given]
Answer:
Answers: a.
pressure, density, velocity and viscosity
b.
flow energy, kinetic energy, height above datum
and internal energy
c.
pressure and velocity
d.
pressure, density, and velocity
• Question 10
0 out of 3.3 points
Which of the following is the equivalent heat transferred of a
gas undergoing isometric process?
Selected Answer: [None Given]
Answers: a.
change in entropy
b.
work nonflow
c.
change in enthalpy
d.
change in internal energy
• Question 11
0 out of 3.3 points
Which of the following is a type of water turbine?
Selected Answer: [None Given]
Answers: a.
Parson
b.
Pelton
c.
Hero
d.
Bankl
• Question 12
0 out of 3.3 points
The heat transfer by convection occurs in which of the
following?
Selected Answer: [None Given]
Answers: a.
Only in gases and liquids
b.
Only in liquids
c.
Only in gases and solids
d.
Only in gases
• Question 13
0 out of 3.3 points
A theorem that states that the total property of a mixture of ideal
gases is the sum of the properties that the individual gases
would have if each occupied the total mixture volume alone as
the same temperature
Selected Answer: [None Given]
Answers: a.
Dalton’s theorem
b.
Gibbs theorem
c.
Boltzmann’s theorem
d.
Maxwell theorem
• Question 14
0 out of 3.3 points
A substance is oxidized when which of the following occurs?
Selected Answer: [None Given]
Answers: a.
it gives off heat
b.
it loses electrons
c.
it turns red
d.
if absorb energy
• Question 15
0 out of 3.3 points
What is the main power generating plant that produces the most
electricity per unit thermal energy in the fuel input and has the
greatest surplus of electricity for most cogeneration system?
Selected Answer: [None Given]
Answers: a.
Gas turbine
b.
Steam turbine
c.
Diesel turbine
d.
Steam engine
• Question 16
0 out of 3.3 points
Which of the following is the structured designed to prevent
the spread of fire having a fire resistance rating of not less
than four hours?
Selected Answer: [None Given]
Answers: a.
fire escape
b.
fire wall
c.
fire shield
d.
fire exit
• Question 17
0 out of 3.3 points
The maximum possible work that can be obtained a cycle operating between
two reservoirs is found from:
• Question 1
3.3 out of 3.3 points
A thermodynamic system that generally serves as a heat source or sink for another
system.
Selected Answer: a.
heat reservoir
Answers: a.
heat reservoir
b.
stirling engine
c.
combustion chamber
d.
heat engine
• Question 2
0 out of 3.3 points
How do you treat a statement that is considered scientific law?
Selected Answer: a.
We generally observed to be true
Answers: a.
We generally observed to be true
b.
Believe to be derived from mathematical theorem
c.
Accept as a summary of experimental observation
d.
We postulate to be true
• Question 3
3.3 out of 3.3 points
Which of the following could be defined as simply push and pull?
Selected Answer: b.
Force
Answers: a.
Work
b.
Force
c.
Power
d.
Inertia
• Question 4
3.3 out of 3.3 points
The ignition coil acts as
Selected Answer: a.
A step up transformer
Answers: a.
A step up transformer
b.
An RC circuit
c.
An inductor
d.
A capacitor
• Question 5
3.3 out of 3.3 points
A fur coat on an animal will help the animal to remain;
Selected Answer: d.
Warm in winter
Answers: a.
Cool in summer
b.
Warm in summer
c.
Cool in winter
d.
Warm in winter
• Question 6
0 out of 3.3 points
The heat transfer by convection occurs in which of the following?
Selected Answer: c.
Only in liquids
Answers: a.
Only in gases and solids
b.
Only in gases
c.
Only in liquids
d.
Only in gases and liquids
• Question 7
3.3 out of 3.3 points
How do you call a phenomenon wherein the heat is transferred by motion of
Fluid under the action of mechanical device?
Selected Answer: b.
forced convection
Answers: a.
thermal radiation
b.
forced convection
c.
natural convection
d.
forced conduction
• Question 8
3.3 out of 3.3 points
Which of the following is true for water at a reference temperature where enthalpy
is zero?
Selected Answer: d.
internal energy is negative
Answers: a.
vapor pressure is zero
b.
entropy is non-zero
c.
specific volume is zero
d.
internal energy is negative
• Question 9
3.3 out of 3.3 points
Which of the following is true for any process
Selected Answer: a.
S(surrounding) + S(system) > = 0
Answers: a.
S(surrounding) + S(system) > = 0
b.
S(surrounding) + S (system) > 0
c.
S(surrounding) +S (system) < = 0
d.
S(surrounding) +s (system) < 0
• Question 10
3.3 out of 3.3 points
Removing of impurities from a gas by bubbling it through liquid purifying agent is
called
Selected Answer: b.
Gas scrubbing
Answers: a.
Gas bubbling
b.
Gas scrubbing
c.
Gas liquefying
d.
Gas purifying
• Question 11
3.3 out of 3.3 points
The coefficient of velocity is the ratio of the:
Selected Answer: d.
Actual velocity to the theoretical velocity
Answers: a.
Area of vena contracta to the orifice area
b.
Actual discharge to the theoretical discharge
c.
Effective head to the actual head
d.
Actual velocity to the theoretical velocity
• Question 12
0 out of 3.3 points
Heat transfer processes which include a change of phase of a fluid are
considered _____.
Selected Answer: d.
Radiation
Answers: a.
Thermal radiation
b.
Convection
c.
Conduction
d.
Radiation
• Question 13
3.3 out of 3.3 points
What is the SI unit of pressure?
Selected Answer: a.
pascal
Answers: a.
pascal
b.
dynes/cm2
c.
Kg/cm2
d.
psi
• Question 14
3.3 out of 3.3 points
One could expect the possibility of Reynolds number similarity in all of the ff cases except:
Selected Answer: a.
Supersonic aircraft
Answers: a.
Supersonic aircraft
b.
Seaplane hulls
c.
Submarines
d.
Torpedoes
• Question 15
3.3 out of 3.3 points
The Carnot refrigeration cycle includes all of the following processes except:
Selected Answer: a.
Isothermal heating
Answers: a.
Isothermal heating
b.
Isenthalpic expansion
c.
Isentropic expansion
d.
Isentropic compression
• Question 16
3.3 out of 3.3 points
The changing of solid directly to vapor without passing through the liquid state is
called
Selected Answer: a.
sublimation
Answers: a.
sublimation
b.
vaporization
c.
evaporation
d.
condensation
• Question 17
3.3 out of 3.3 points
Dew point is defined as
Selected a.
Answer:
The temperature to which the air must be cooled at constant
pressure to produce saturation
Answers: a.
The temperature to which the air must be cooled at constant
pressure to produce saturation
b.
The pressure which dew is formed in the air.
c.
The point where the pressure and temperature lines meet
d.
The temperature which dew is formed in the air
• Question 18
3.3 out of 3.3 points
Which of the following instrument is used in measuring specific gravity?
Selected Answer: b.
Hydrometer
Answers: a.
Thermometer
b.
Hydrometer
c.
Anemometer
d.
Hygrometer
• Question 19
3.3 out of 3.3 points
The pressure obtained from barometric pressure reading.
Selected Answer: b.
atmospheric pressure
Answers: a.
absolute pressure
b.
atmospheric pressure
c.
gage pressure
d.
vacuum pressure
• Question 20
3.3 out of 3.3 points
In Stirling and Ericson cycle, regeneration can
Selected Answer: b.
Increase efficiency
Answers: a.
Decrease efficiency
b.
Increase efficiency
c.
Limit efficiency
d.
Control efficiency
• Question 21
3.3 out of 3.3 points
A property of lubricating oil that measure the thickness of the oil ad will help
determine how long oil will flow at a given temperature is known as:
Selected Answer: c.
Viscosity
Answers: a.
Cloud point
b.
Flash point
c.
Viscosity
d.
Cloud point
• Question 22
3.3 out of 3.3 points
Power may be expressed in units of
Selected Answer: d.
btu/hr
Answers: a.
btu
b.
ft-lb
c.
kw-hr
d.
btu/hr
• Question 23
3.3 out of 3.3 points
Which of the following is the requirement of the temperature of a body for it to
emit radiation?
Selected Answer: b.
Above zero Kelvin
Answers: a.
High enough for it to glow
b.
Above zero Kelvin
c.
Above of the temperature of the surroundings
d.
Above zero Celsius
• Question 24
0 out of 3.3 points
Theoretically air needed for the combustion of one kg of fuel is:
Selected Answer: [None Given]
Answers: a.
16.7 kg
b.
14.5 kg
c.
27.4 kg
d.
100kg
• Question 25
0 out of 3.3 points
Why are metals good conductors of heat?
Selected Answer: [None Given]
Answers: a.
Because they have reflecting surfaces
b.
Because their atoms collide infrequently
c.
Because their atoms are relatively far apart
d.
Because they contain free electrons
• Question 26
0 out of 3.3 points
Which of the following needs to be filtered in a diesel engine?
Selected Answer: [None Given]
Answers: a.
Air, diesel oil and lubricating oil
b.
Lubricating oil only
c.
Air only
d.
Air and diesel oil only
• Question 27
0 out of 3.3 points
What is thermal diffusivity?
Selected Answer: [None Given]
Answers: a.
A dimensionless parameter
b.
A physical property of the material
c.
A mathematical formula
d.
A configuration for heat conduction
• Question 28
0 out of 3.3 points
What keeps the moisture from passing through the system?
Selected Answer: [None Given]
Answers: a.
Trap
b.
Dehydrator
c.
Aerator
d.
Humidifier
• Question 29
0 out of 3.3 points
Pitot tube is use to measure the:
Selected Answer: [None Given]
Answers: a.
Velocity of flow
b.
Flow
c.
Velocity of mass
d.
Velocity of pipe
• Question 30
0 out of 3.3 points
The equivalent of ratio of emissive power to absorptivity for bodies in thermal
equilibrium is described by:
Selected Answer: [None Given]
Answers: a.
Newton’s Law
b.
Fourier’s law
c.
Kirchoff’s law
d.
The logarithmic mean temperature difference
• Question 1
3.3 out of 3.3 points
The products of complete combustion of gaseous hydrocarbons
Selected Answer: d.
Carbon dioxide and water
Answers: a.
Carbon monoxide
b.
Carbon monoxide, water and ammonia
c.
Water, carbon monoxide and carbon dioxide
d.
Carbon dioxide and water
• Question 2
3.3 out of 3.3 points
A spark voltage requires voltage of:
Selected Answer: d.
220 V
Answers: a.
124 V
b.
440 V
c.
112 V
d.
220 V
• Question 3
3.3 out of 3.3 points
Diesel engine fuels are rated by:
Selected Answer: b.
Cetane number
Answers: a.
Calorific value
b.
Cetane number
c.
Specific gravity
d.
Octane number
• Question 4
3.3 out of 3.3 points
When not in use, the self-discharge of an automobile battery in dry weather is
generally:
Selected Answer: c.
0.5 to 1%
Answers: a.
Not more than 10%
b.
3 to 5%
c.
0.5 to 1%
d.
5 to 7.5%
• Question 5
3.3 out of 3.3 points
The coefficient of contraction is the ratio of the :
Selected Answer: b.
Area of vena contracta to the orifice area
Answers: a.
Actual discharge to the theoretical discharge
b.
Area of vena contracta to the orifice area
c.
Effective head to the actual head
d.
Actual velocity to the theoretical velocity
• Question 6
3.3 out of 3.3 points
Which of the following is the best definition of enthalpy?
Selected d.
Answer: The amount of useful energy in a system
Answers: a.
The heat required to cause a complete conversion between two
phases at a constant temperature
b.
The ratio of heat added to the temperature increases in a system
c.
The amount of energy no longer available to the system.
d.
The amount of useful energy in a system
• Question 7
0 out of 3.3 points
What do you call the passing of heat energy from molecule to molecule through
a substance?
Selected Answer: a.
Conduction
Answers: a.
Conduction
b.
Convection
c.
Conservation
d.
Radiation
• Question 8
3.3 out of 3.3 points
The instrument used to measure atmospheric pressure is:
Selected Answer: d.
Barometer
Answers: a.
Rotator
b.
Venturi
c.
Manometer
d.
Barometer
• Question 9
3.3 out of 3.3 points
The first law of the thermodynamics is based on which of the following principle?
Selected Answer: d.
Conservation of energy
Answers: a.
Conservation of mass
b.
Enthalpy-entropy relationship
c.
Entropy-temperature relationship
d.
Conservation of energy
• Question 10
3.3 out of 3.3 points
A Bell-Coleman cycle is a reversed
Selected Answer: c.
Joule cycle
Answers: a.
Stirling cycle
b.
Otto cycle
c.
Joule cycle
d.
Carnot cycle
• Question 11
3.3 out of 3.3 points
All of the following are characteristics of metals except:
Selected Answer: b.
Tendency to form brittle solids
Answers: a.
Tendency to form positive ions
b.
Tendency to form brittle solids
c.
High melting points
d.
High electrical conductivities
• Question 12
3.3 out of 3.3 points
The solid – liquid equilibrium of Tungsten is at what temperature?
Selected Answer: b.
1774°C
Answers: a.
960.8°C
b.
1774°C
c.
630.5°C
d.
1063°C
• Question 13
3.3 out of 3.3 points
The self starting motor for automobiles is a:
Selected Answer: b.
Dc series motor
Answers: a.
Synchronous motor
b.
Dc series motor
c.
Dc shunt motor
d.
Universal motor
• Question 14
3.3 out of 3.3 points
What is the main power generating plant that produces the most electricity per
unit thermal energy in the fuel input and has the greatest surplus of electricity for
most cogeneration system?
Selected Answer: c.
Diesel turbine
Answers: a.
Steam engine
b.
Steam turbine
c.
Diesel turbine
d.
Gas turbine
• Question 15
3.3 out of 3.3 points
Amount of heat liberated by the complete combustion of a unit weight or volume of
fuel is:
Selected Answer: a.
Heating value
Answers: a.
Heating value
b.
Latent
c.
Sensible heat
d.
Work compression
• Question 16
3.3 out of 3.3 points
When a certain mass of fluid in particular state passes through a series of process
and returns to its initial state, it undergoes a:
Selected Answer: c.
cycle
Answers: a.
revolution
b.
rotation
c.
cycle
d.
process
• Question 17
3.3 out of 3.3 points
Speedometer drive is generally taken from:
Selected Answer: b.
Front wheel
Answers: a.
Dynamo
b.
Front wheel
c.
Fan belt
d.
Flywheel
• Question 18
3.3 out of 3.3 points
When the entire heat exchanger is selected as control volume, heat becomes
_____.?
Selected Answer: b.
Zero
Answers: a.
Unity
b.
Zero
c.
Undefined
d.
Indeterminate
• Question 19
3.3 out of 3.3 points
Starting motor current may be about
Selected Answer: b.
25 A
Answers: a.
0.5 A
b.
25 A
c.
5.1 A
d.
0.15 A
• Question 20
3.3 out of 3.3 points
Assuming real processes, the net entropy change in the universe:
Selected Answer: d.
is positive
Answers: a.
equals zero
b.
must be calculated
c.
is negative
d.
is positive
• Question 21
3.3 out of 3.3 points
One could expect the possibility of Froude number similarity in all of the ff cases
except:
Selected Answer: b.
Subsonic airfoils
Answers: a.
Flow over spillways
b.
Subsonic airfoils
c.
Surge and flood waves
d.
Motion of a fluid jet
• Question 22
3.3 out of 3.3 points
A reservoir that absorbs energy in the form of heat is called _________.
Selected Answer: b.
Sink
Answers: a.
Heat reservoir
b.
Sink
c.
Source
d.
Cold reservoir
• Question 23
0 out of 3.3 points
For steam nozzle, which of the following ratios will have the value less than unity?
Selected Answer: [None Given]
Answers: a.
Temperature of steam at inlet/temperature of steam at outlet
b.
Specific volume at inlet/specific volume at outlet
c.
None of the other choices
d.
Pressure at inlet/pressure at outlet
• Question 24
0 out of 3.3 points
The relationship between the total pressure of a mixture of non-reacting gases
and the partial pressures of constituents is given by:
Selected Answer: [None Given]
Answers: a.
volumetric fractions
b.
mole fractions
c.
gravimetric fractions
d.
Dalton’s law
• Question 25
0 out of 3.3 points
Thermal conductivity of wood depends on which of the following:
Selected Answer: [None Given]
Answers: a.
Temperature
b.
Density
c.
Moisture
d.
All of the other choices
• Question 26
0 out of 3.3 points
A pressure of 1 millibar is equivalent to
Selected Answer: [None Given]
Answers: a.
1000 cm of hg
b.
1000 kg/cm2
c.
1000 psi
d.
1000 dynes/cm2
• Question 27
0 out of 3.3 points
Both Stirling and Ericson engine are
Selected Answer: [None Given]
Answers: a.
External combustion engines
b.
Brayton engines
c.
Carnot engines
d.
Internal combustion engines
• Question 28
0 out of 3.3 points
In actual gases the molecular collisions are:
Selected Answer: [None Given]
Answers: a.
Inelastic
b.
Inplastic
c.
Plastic
d.
Elastic
• Question 29
0 out of 3.3 points
What is the most efficient thermodynamics cycle?
Selected Answer: [None Given]
Answers: a.
Carnot
b.
Brayton
c.
Diesel
d.
Rankine
• Question 30
0 out of 3.3 points
The residual oil left after distillation of gasoline and kerosene from crude
petroleum; yellow to brown oil, used as a diesel fuel and for enriching water gas.
Selected Answer: [None Given]
Answers: a.
LPG
b.
Diesel oil
c.
Gasoline oil
d.
Gas oil
• Question 1
0 out of 3.3 points
The emf is a function of the temperature difference between a junctions, a
phenomenon called:
Selected Answer: a.
electro motive force
Answers: a.
electro motive force
b.
stagnation Effect
c.
seebeck effect
d.
primming
• Question 2
3.3 out of 3.3 points
A finely divided carbon deposit by the smoke or flame is called
Selected Answer: b.
Soot
Answers: a.
Residue
b.
Soot
c.
All of the choices
d.
Fly ash
• Question 3
3.3 out of 3.3 points
Under ideal conditions, isothermal, isobaric, isochoric, and adiabatic process are;
Selected Answer: c.
Quasi – static process
Answers: a.
Static process
b.
Stable process
c.
Quasi – static process
d.
Dynamic process
• Question 4
3.3 out of 3.3 points
The percentage of heat released from fuel-air mixture, in an internal combustion
engine which is converted into useful work is roughly:
Selected Answer: a.
20-25%
Answers: a.
20-25%
b.
10-20%
c.
10%
d.
40-45%
• Question 5
3.3 out of 3.3 points
Flows through multi-loop systems may be computed by:
Selected Answer: c.
All of the other choices
Answers: a.
Trial and error
b.
Any closed- form solution of simultaneous equations
c.
All of the other choices
d.
The hardy-cross method
• Question 6
3.3 out of 3.3 points
Non-isotropic conductivity is shown by which of the following?
Selected Answer: b.
Wood
Answers: a.
Steel
b.
Wood
c.
Brass
d.
Copper
• Question 7
3.3 out of 3.3 points
A temperature above which a given gas cannot be liquefied:
Selected Answer: a.
Critical temperature
Answers: a.
Critical temperature
b.
Vaporization temperature
c.
Absolute temperature
d.
Cryogenic temperature
• Question 8
3.3 out of 3.3 points
Solubility of a gas in a liquid at small concentration can be represented by which
law?
Selected Answer: d.
Henry’s law
Answers: a.
Clausius-Clapeyron’s equation
b.
Raoult’s law
c.
Dalton’s law
d.
Henry’s law
• Question 9
3.3 out of 3.3 points
Which of the following thermodynamics cycles is the most efficient?
Selected Answer: a.
carnot
Answers: a.
carnot
b.
otto
c.
rankine
d.
brayton
• Question 10
3.3 out of 3.3 points
Loss power is due to:
Selected Answer: d.
Low injection pressure
Answers: a.
Clogging of air cleaner
b.
Poor compression
c.
Restricted exhaust
d.
Low injection pressure
• Question 11
3.3 out of 3.3 points
A heat engine is supplied heat at rate of 30,000J/s gives an output of 9kW. The
thermal efficiency of the engine is:
Selected Answer: a.
30%
Answers: a.
30%
b.
50%
c.
43%
d.
55%
• Question 12
3.3 out of 3.3 points
Which of the following is the best definition of enthalpy?
Selected d.
Answer: The amount of useful energy in a system
Answers: a.
The amount of energy no longer available to the system.
b.
The ratio of heat added to the temperature increases in a system
c.
The heat required to cause a complete conversion between two
phases at a constant temperature
d.
The amount of useful energy in a system
• Question 13
3.3 out of 3.3 points
The total entropy of a pure substance approaches zero as the absolute
thermodynamics temperature approaches zero.
Selected Answer: a.
third law of thermodynamics
Answers: a.
third law of thermodynamics
b.
second law of thermodynamics
c.
first law of thermodynamics
d.
Zeroth law of thermodynamics
• Question 14
3.3 out of 3.3 points
When the water in the products of combustion is in the vapor state, the heating
value is:
Selected Answer: c.
Lower heating value
Answers: a.
Higher heating value
b.
Gross calorific value
c.
Lower heating value
d.
Average heating value
• Question 15
3.3 out of 3.3 points
All of the following processes are irreversible except.
Selected Answer: a.
an isentropic compression of a perfect gas.
Answers: a.
an isentropic compression of a perfect gas.
b.
chemical reactions
c.
diffusion
d.
Current flow through an electrical resistance.
• Question 16
3.3 out of 3.3 points
When hot soup was served in a cup during dinner an engineer was so eager to
drink it. Since it was hot he added cubes of ice to cool the soup and stirred it. He
noticed that dew starts to form on the outermost surface of the cup. What is this
temperature equal to?
Selected Answer: c.
Equal to air’s dew point temperature
Answers: a.
Standard temperature
b.
Equal to zero
c.
Equal to air’s dew point temperature
d.
Superheated temperature
• Question 17
3.3 out of 3.3 points
In an Otto engine, the heat is added during
Selected Answer: a.
Isometric process
Answers: a.
Isometric process
b.
Isentropic process
c.
Isothermal process
d.
Isobaric process
• Question 18
3.3 out of 3.3 points
The rate at which an object radiates electromagnetic energy does not depend
on its:
Selected Answer: a.
Mass
Answers: a.
Mass
b.
Temperature
c.
Surface area
d.
Ability to absorb radiation
• Question 19
3.3 out of 3.3 points
A system in which there is no exchange of matter with the surrounding or mass
does not cross its boundaries
Selected Answer: b.
closed system
Answers: a.
isolated system
b.
closed system
c.
open system
d.
nonflow system
• Question 20
3.3 out of 3.3 points
The following properties are different for isomers of the same chemical compound
except
Selected Answer: d.
Number of atoms in a mole of each isomers
Answers: a.
Density
b.
Specific heat
c.
Melting point
d.
Number of atoms in a mole of each isomers
• Question 21
3.3 out of 3.3 points
The property of liquid in which they extend resistance to angular or shear
deformation is:
Selected Answer: a.
Viscosity
Answers: a.
Viscosity
b.
Specific gravity
c.
Specific weight
d.
Density
• Question 22
3.3 out of 3.3 points
In order to emit electromagnetic radiation, an object must be at a temperature:
Selected Answer: a.
Above 0 K
Answers: a.
Above 0 K
b.
Above 0°C
c.
Above that of its surroundings
d.
High enough for it to glow
• Question 23
3.3 out of 3.3 points
What is the pressure at the exit of a draft tube in turbine?
Selected Answer: d.
Atmospheric
Answers: a.
Vacuum
b.
Below atmospheric
c.
Above atmospheric
d.
Atmospheric
• Question 24
0 out of 3.3 points
The solid – liquid equilibrium of Silver is at what temperature?
Selected Answer: [None Given]
Answers: a.
1774°C
b.
1063°C
c.
960.8°C
d.
630.5°C
• Question 25
0 out of 3.3 points
Which of the following transfer of heat is involved in the changing of boiling
water( at 100 celsius) to vapor at the same temperature?
Selected Answer: [None Given]
Answers: a.
radiation
b.
convection
c.
evaporation
d.
conduction
• Question 26
0 out of 3.3 points
Thermal conduction is described by:
Selected Answer: [None Given]
Answers: a.
The Stefan – Boltzmann law
b.
Fourier’s Law
c.
Newton’s Law
d.
The logarithmic mean temperature difference
• Question 27
0 out of 3.3 points
Which of the following heat exchangers where fluid flow in the same direction
and both are of changing temperatures?
Selected Answer: [None Given]
Answers: a.
Mixed flow
b.
Cross flow
c.
Parallel flow
d.
Counter flow
• Question 28
0 out of 3.3 points
What is the SI unit of force
Selected Answer: [None Given]
Answers: a.
kilogram
b.
dyne
c.
newton
d.
pound
• Question 29
0 out of 3.3 points
The ratio of the gas constant to Avogadro’s number is:
Selected Answer: [None Given]
Answers: a.
Napier constant
b.
Boltzmann’z constant
c.
Maxwell’s constant
d.
Joule’s constant
• Question 30
0 out of 3.3 points
In an oxidation – reduction chemical reaction, all of the following occur except:
Selected Answer: [None Given]
Answers: a.
Elements becoming more positive
b.
Elements becoming more negative
c.
Nuclear fusion
d.
The exchange of electrons between elements