Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Most Cisco switches support max 64 etherchannels. These interfaces do not have to be
contiguous.
or even on the same module. Each channel must be made up of min 2, max 8 interfaces.
The best is to use 2 ,4 or 8 interfaces. This will give the perfect load-balancing.
It is possible to change what path with-in the etherchannel a frame takes by used the following
command:
<test etherchannel load-balance interface port-channel [#] ip [src] [dst]>
There are two type of dynamic protocols to negotiate an etherchannels: PAgP and LACP
8021.AD
PAgP is Cisco proprietary
When these protocols start to communicate there is an exchange of information before the port-
channel can be formed. The following items must match before a port-channel can form:
- same speed/duplex
- Access VLAN (if not trunked)
- Same trunking type, allowed VLAN and native VLAN (if trunked)
- Each port must have the same STP cost per VLAN with-in the portchannel
- No SPAN ports
Show command’s
Verify command’s