Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DESCRIPTION
Styrolution PS 485N is a high impact grade of polystyrene for extruded sheets with a matte surface.
FEATURES APPLICATIONS
Matte surface Extruded parts with matte finish
UL 94 HB Fat resistant packaging
Rheological Properties
Mechanical Properties
Thermal Properties
Electrical Properties
Contact us:
Phone +49 (2133) 9309 – 168
INSTY.emea@ineos.com Page 1 of 2
www.ineos-styrolution.com Revision Date: 2016.01.17
Styrolution PS 485N
High Impact Polystyrene (HIPS)
Other Properties
Processing
SUPPLY FORM
Styrolution PS 485N is supplied as cylindrical shaped granules. It has to be kept in its original containers in a cool, dry place. Avoid direct
exposure to sunlight. Styrolution PS 485N can be stored in silos.
PROCESSING
Styrolution PS 485N can be processed by all conventional techniques using standard conditions for impact polystyrene. Mass temperature
during extrusion should be below 240°C.
PRODUCT SAFETY
During processing of Styrolution PS small quantities of styrene monomer may be released into the atmosphere. At styrene vapor
concentrations below 20ppm no negative effects on health are expected. In our experience, the concentration of styrene does not exceed 1
ppm in well ventilated workplaces - that is were five to eight air changes per hour are made.
DISCLAIMER
The aforementioned data shall constitute the agreed contractual quality of the product sold by INEOS Styrolution at the time of passing of risk.
INEOS Styrolution does not make any further warranty, representation or guarantee of any kind, express or implied, regarding the suitability of
the product for any particular purpose or application and INEOS Styrolution disclaims all liability in connection therewith. The customer himself
is required to verify whether or not the product is suitable for the further processing or application intended and whether or not the product
complies with the relevant statutory requirements. Unless explicitly and individually otherwise agreed in writing, INEOS Styrolution's sole and
exclusive liability with respect to its products is set forth in INEOS Styrolution's General Terms and Conditions for Sale.
Contact us:
Phone +49 (2133) 9309 – 168
INSTY.emea@ineos.com Page 2 of 2
www.ineos-styrolution.com Revision Date: 2016.01.17