Sei sulla pagina 1di 11

Gedung Kawan Lama

Jalan Puri Kencana No. 1, RT 005 RW 002


Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

CF-20TX CASE ERECTOR


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Technical specifications of CF-20TX


Brief Descriptions:
Case Erectors is used to erect carton which have been shaped automatically and use tape as sealing
materials to seal the bottom cover of carton.

A stack of corrugated blanks are knocked down and placed into the machine. The blanks are pulled out
of the machine one-by-one and formed into cases. The newly formed cases are sealed at the bottom
with tape or glue.

This machine can be used in wide range, such as household appliances, spinning, food, general
merchandise, medicine, chemical industry, ceramics, and so on.

Machine picture and drawing (as reference)

Kawan Lama Sejahtera 2


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Drawing:
Standard: Left hand machine

Kawan Lama Sejahtera 3


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Kawan Lama Sejahtera 4


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Kawan Lama Sejahtera 5


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Kawan Lama Sejahtera 6


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Direction of Carton and the direction of the machine:

A. Standard Machine
Input at right side, and output at left side

B. Right Hand Machine


Input at left side, and output at right side

Kawan Lama Sejahtera 7


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Basic Parameter:
Machine model number CF-20TX
Voltage: 1P 220V 50Hz
Machine Size: L2425×W1855×H1300mm
Worktable height: 650mm (standard) – 1000mm (maximum, custom-
made)
Tape: BOPP or Kraft Paper tape
Tape size: 4.8 – 7.2cm
Power: 0.4 KW
Air supply: ≥6Kgf/cm²
Protective power supply: IP54
Noise: ≤75 DB
Environment condition: Humidity ≤98%,Temperature -10℃~40℃
Working speed: 0 ~12 case/min
Carton size: L 250 – 530 X W150 – 400mm x
a) H: 225 – 600mm ( H+ W/2, after folding and
sealing the bottom flap)
b) H: 150 – 400mm ( the machine can be custom-
made for bigger size)
570 > W/2 + H >300mm
Main electrical and PLC: Siemens
pneumatic parts: Touch screen: Youngsun, LIANWEI or Siemens
(custom-made)
Contactor: Schneider
Switch power supply: Delta
Main motor: Luson or SEW (Custom-made)

Kawan Lama Sejahtera 8


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Sensor: P + F
Button: Schneider
Alarm lamp: Siemens APT
Cylinder: Airtac
Vacuum generator: SMC
Suction cup: Youngsun
Packing size: L 2.5 X W 1.22 X H 1.75 meters
Machine weight: G.W/ 685 kg / N.W.600 kgs

Drawing of Carton Size:

Working Flow:
a) adjust the parameters of the machine according to the carton size
b) put carton paper board onto the paper board stock frame
c) Suck carton  fold front & back flap  fold left & right flap  seal bottom by tape

Kawan Lama Sejahtera 9


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

Parts and tools delivered with Machine:


No. Specification Code No. Qty
1 Big tension spring FJ-H-07 1 pc
2 Tension spring for blade FJ-H-05 1 pc
3 Torsion spring for pressing tape board FJ-H-03 1 pc
4 Torsion spring for guiding tape board FJ-H-00 1 pc
5 Torsion spring for protective knife frame FJ-H-01 1 pc
6 Blade 1 pc
7 Screw M4 10 pc
Tool
9 “+“ screw driver 1 pc
10 “-“ screw driver 1 pc
11 inner hexagonal spanner 1 pc

Wearable parts:
No. Name Code No. QTY Remark
1 Big tension spring FJ-H-07 1 pc
2 Tension spring for blade FJ-H-05 1 pc
3 Torsion spring for pressing FJ-H-03 1 pc
tape board
Delivered with
4 Torsion spring for guiding FJ-H-00 1 pc
the machine
tape board
5 Torsion spring for protective FJ-H-01 1 pc
knife frame
6 Blade 1 pc
7 Vacuum suction cup Dia. 55 x 20 mm 4pcs/unit
8 Vacuum generator ZH13BS-08-10 1 pc
9 Oil buffer AC2020-2 1 pc
10 Belt 1720 x 73 x 5 1 pc
11 Linear bearing LM20UU 2pcs/unit
12 Linear bearing LM25UU 10pcs/unit
13 Cylinder AC2020 1 pc Suggested to
14 Cylinder SC40 x 250 – S 1 pc Purchase
15 Cylinder SC40 x 80 – S 2pcs/unit
16 Cylinder MAL 32 x 30 – S – 2pcs/unit
CA
17 Cylinder SC50 x 200 – S 1 pc
18 Cylinder SC50 x 75 – S 1 pc
19 Throttle valve NSE8-02 10pcs/unit

Kawan Lama Sejahtera 10


Gedung Kawan Lama
Jalan Puri Kencana No. 1, RT 005 RW 002
Kembangan, Jakarta 11610 – INDONESIA
Telp.: (021) 582-8282 / Fax.: (021) 582-0088

20 Throttle valve PL8-02 8pcs/unit


21 Electromagnetic valve 4V210-08DC24V 6pcs/unit

Kawan Lama Sejahtera 11

Potrebbero piacerti anche