Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TM 1703 ACP
Flexible automation and telecontrol
Versatility is essential
TM 1703 ACP permits systematic reduction of hard-wired I/O interfaces
through the direct connection of actuators and sensors with wire cross-
sections of up to 2.5 mm2. Modules for binary input and output up to
220 VDC also open up streamlining potentials on the interposing level.
For decentral input/output, individual modules can be distributed as much
as 200 m from the master controller.
IEC 60870-5-104
TM 1703 ACP
Master control element
TM 1703 ACP
in practical use
Master control element Peripheral element
Up to four communications interfaces via One peripheral element consists of a
insertable serial interface modules for: power supply, peripheral interface and
– serial communication (point-to-point, up to eight I/O modules
multipoint, and dial-up traffic) Direct connection of the signal cables
– LAN/WAN (Ethernet) via pull-off screw terminals
– Profibus DP Acquisition, processing, and output of
Interfacing of up to 16 peripheral elements process data
via the serial Ax-1703 peripherals bus Exchange of process data with the
(16 mbps) master control element via the serial
Function diagram design according to Ax-1703 peripheral bus
IEC 61131-3 with CAEx plus for open-loop
and closed-loop control functions
Configurable telecontrol functions with
and without time tagging
Time synchronization via minute pulse,
time signal receiver, serial communications
link or NTP server (LAN/WAN)
Parameter setting, diagnostics, and testing
by SAT Toolbox II, both locally or from
remote locations
Storing of parameters and firmware on
flash card
Technical data
Model number
Master control element CP-6003/CPC65 Processing and communication
Peripheral elements
Periphery interfacing PE-6400 Periphery interfacing for A x 1703 electrical peripherals bus
PE-6401 Periphery interfacing for A x 1703 optical peripherals bus
Power supply PS-6620 Power supply module 24–60 VDC
PS-6630 Power supply module 24–60 VDC EMC+
PS-6632 Power supply module 110–220 VDC EMC+
I/O modules DI-6100 Binary input 2 x 8, 24/60 VDC
DI-6101 Binary input 2 x 8, 110–220 VDC
DI-6102 Binary input 2 x 8, 24–60 VDC 1ms
DI-6103 Binary input 2 x 8, 110/220 VDC 1ms
DO-6200 Binary output transistor 2 x 8, 24–60 VDC
DO-6212 Binary output relay 1 x 8, 24–220 VDC/230 VAC
AI-6300 Analog input 2 x 2, ±20 mA/±10 mA/±10 V
AI-6303 Direct transformer input (4 x 220 V, 3 x 6 A)
AI-6307 Analog input 2 x 2, ±5 mA
AI-6310 Analog input 2 x 2 Pt100
AO-6380 Analog output 4 x ±20 mA/±10 mA/±10 V
TE-6420 Speed measurement 2 x 2 5 VDC/24 VDC/NAMUR
TE-6450 Position measurement 2 x 2 SSI/RS-422
Open-loop and closed-loop 256 kB for user programs, approx. 50,000 variables and signals,
control functions 2,000 of which buffered, 250 buffered setpoint values
Temperature range Master control element: –25 ... +65 °C (depending on hardware configuration)
Peripheral element: –25 ... +70 °C
Vibration and shock resistance IEC 60068-2, IEC 60870-2-2 Cl. Bm, IEC 60255-21 Cl. 1
www.siemens.com/energy
Order-No. E50001-U321-A252-X-7600
Printed in Germany
Dispo 06200
TH 345-060135 101790 PA 04062.0
E-mail: support.energy@siemens.com
www.siemens.com/energy-support