Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Instruction manual
Contents
Part one 16 Network and SIM information 22 Network connection 27 Phone information
16 Network compatibility 22 Signal strength 27 Technical information
16 SIM information 22 Mobile network provider settings 27 Activity log and storage counts
6 Safety 16 Inserting a SIM card 27 Data usage
6 Using the MP02 safely
16 Viewing the SIM’s phone number 23 Sounds
7 Safe disposal information
16 SIM PIN
23 Ringtone selection
28 Bluetooth
23 Message alert selection 28 About Bluetooth
8 Emergency calls 17 Charging the battery 23 Phone volume level 28 Turning Bluetooth on and off
17 Cable compatibility 23 Silent mode 28 Pairing with another device
8 About emergency calls
17 Using the supplied charger 23 Vibration alert feature 28 ‘Visibility’
8 Making an emergency call
17 Charging from a computer 23 Start-up/shut-down sound 28 Device name
17 Using a different charger
9 First steps 17 Troubleshooting 24 Date and Time 29 Shortcuts
9 How to use this manual 17 Preserving battery charge
24 Automatic or manual setting 29 Introducing Shortcuts
9 Using a new MP02 for the first time
24 Setting the date manually 29 Creating a Shortcut
18 Switching on and off 24 Setting the time manually 29 Features and actions that can be linked to
10 Controls and key components 18 Switching on 24 Choosing 12-hour or 24-hour format 29 Using a Shortcut
10 Included with the MP02 18 Switching on for the first time 24 Alternate time zone 29 Deleting a Shortcut
18 Switching off
11 Keypad 25 Language selection 30 Entering text I
12 The MP02’s operating system Part two 25
25
The operating system language
The input language
30
30
The T9 system
Memorising the keypad
12 The Home screen
12 Main Menu
26 Resetting the MP02 31 Entering text II
13 Status menu 20 Security I 26 Forced restart 31 Text-entry modes
13 Options Menus 20 About the keypad lock feature 26 Deleting all Contacts 31 Input languages
14 Scrolling 20 Locking and unlocking the keypad 26 Deleting everything 31 Capitalisation
14 Highlighting 20 Setting the keypad to lock automatically 26 After a reset
14 Selecting 20 Passcode protection
15 Notifications 20 SIM PIN
21 BlackBerry Secure
⏤ Revision date
July 2019
⏤ Change
First version
Use the charger safely Leave it to the professionals Safe disposal information
Only use the charger indoors. Use only Do not open or dismantle the MP02. The
approved chargers and accessories that are battery is not consumer-replaceable and will
known to be fully compatible. Never use a become hazardous if damaged. If liquid from The crossed-out symbol above signifies that
damaged charger or other accessory. Unplug the battery touches the skin or eyes, seek the product (including its battery) must be
the charger when not in use, especially if there urgent medical assistance. If the MP02 stops disposed of separately from household waste.
is a possibility of lightning nearby. Use the working, or if the battery needs to be • Separate out electronic equipment and
charger for its intended purpose only. When replaced, contact a local Punkt. dealer or get packaging materials.
unplugging always pull the plug (not the in touch with Punkt. directly. • Do not remove the battery.
cable). • Do not dispose of the MP02 as unsorted
municipal waste. At the end of its life, take
it for recycling at an appropriate collection
Take care if the MP02 is damaged point. Contact the local authority for more
If the MP02 is damaged, stop using it and information, or locate a specialist phone
place it in a plastic bag to contain possible recycling service.
battery leakage. The screen on the MP02 is
made of glass: protect it from impact. If it
breaks, do not touch or attempt to remove the
broken glass. Stop using it and arrange for the
screen to be replaced by an authorised
technician.
How to use this manual features that are unlikely to be used) and then
The MP02 is a relatively simple phone to use. finish off by doing a total reset.
But it is very different to a smartphone, it Troubleshooting tips are available on the
does not have a “Help” feature, and many of Punkt. website. For any further questions, the
its features are not readily guessable. Punkt. customer care team will be happy to
Therefore, it is necessary to learn its features help.
in a systematic manner.
Using a new MP02 for the first time
This manual is designed to be worked through
in the order that it is written, Before an MP02 can be used phone for the
comprehensively and from start to finish. It first time, the following steps need to be
should be recognised as being primarily an taken:
instruction manual rather than a reference • Insert a SIM card.
manual. Later sections will assume knowledge
of information presented in earlier sections – • Fully charge the battery.
especially the contents of Section One. • Turn the MP02 on.
The end result is that the user learns exactly • Follow the start-up process that will
how his/her entire phone works; a refreshing automatically appear.
change compared to the byzantine nature of a The MP02 is produced with a protective film
smartphone’s operating system and apps. over the screen. Only remove this when it is
certain that the phone is not going to be
The best way to use this manual is to do a returned under the retailer’s returns policy.
“dummy run”, entering temporary settings
and playing with the phone until each and
every feature is totally understood (even
Hands-free
speaker
• USB charger
• USB-A to USB-C cable
• SIM removal tool
• USB-C earpiece
• Product documentation: Getting
Started guide, Warranty and
Product information
The Home screen The Home screen can be reached from other
Instead of a areas of the OS by pressing the End key (or by
touchscreen, the The MP02’s minimalist Home screen always
displays the current time, date and day of the
repeatedly pressing the Back key).
MP02’s operating week. It also gives a very limited amount of All actions described in this instruction
priority information about the phone, manual are based on starting from the Home
system uses a including whether its battery is charging or if screen, unless otherwise stated. The MP02’s
text-based interface, the charge level is below 10%, if the network secondary features are accessed via the Main
menu, which is opened by pressing the key
signal is weak, and whether there are any
with dedicated keys for Notifications to read (e.g. an alarm setting, a while the Home screen is displayed.
Highlighting Selecting
When something is scrolled to (e.g. a menu This is a two-stage procedure, comparable
item or a text message) it becomes to moving a computer mouse’s pointer to
highlighted. an item and then clicking on it. To select
something on the MP02, first highlight it
and then press the key.
Selecting an item will generally enter a
command, lead to another menu, reveal
extra information, or access a feature.
Notifications
Press the Down key to access Notifications.
Each Notification can be expanded by
scrolling to it and then, when it is
highlighted, pressing the key. For some
types of Notification, this causes a list of
options to be displayed.
• Insert the small end of the supplied the Main menu open the Settings menu, to be working (e.g. a lamp). silencing the phone completely (the
USB-C cable (either way up) into the then Connectivity, then Other options. If • Test the USB power supply by screen will illuminate whenever a
socket on the bottom edge of the the USB connection is set to Sync mode, plugging the USB cable into an call or text message is received).
MP02 with the wider part of the metal press the key to change it to Charge alternative USB power source that is • Deactivate Bluetooth.
element. only. known to be working (e.g. a computer,
• Try to keep the phone in an area
• Insert the other end of the cable into Charging from a computer will generally see below).
with a strong mobile signal.
the charger provided. take longer than from a dedicated • Test the USB cable by using it to
• Lock the keypad as soon as the
• Connect the USB charger to an charger. connect a different device that is
phone is no longer in use, to avoid
appropriate mains power outlet. If known to be working, or by using a
Using a different charger illuminating the screen
necessary, switch the mains supply on. different (compatible) USB cable that
unnecessarily.
• If the MP02 is switched off, it will now The MP02 is supplied with a small, is known to be reliable.
display an image indicating the charge portable charger. Faster charging can be
level as it increases. (this may take a achieved by using a larger, desktop
charger.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 17
Switching on and off
Switching on Switching on for the first time • If 12-hour clock format has been
selected, use the Up and Down arrows
• To switch the MP02 on, press and hold When an MP02 is switched on for the first
to specify AM or PM for the current
the On/Off button on the top of the time (or after a reset), it will prompt the
time. When the correct option is
phone. user to choose a language, choose a clock
shown, press to enter.
• If the phone has been set to require a format (12hr/24hr) and enter the current
time and date, to ensure that text messages • Repeat this three times to set the
passcode, enter it when requested and
are given a correct date stamp from the current date. (Note whether it is in
press the key. More information
outset. little-endian or middle-endian format.)
about passcodes can be found on p 20.
• If the SIM card has been set to require a The Back key can be used to return to a
passcode, this will be requested next. previous stage. If the screen goes black,
More information about the SIM press any key or button to reactivate it. The Switching off
passcode (PIN) can be found on p 20. setting-up process can be cancelled by To switch off, press and hold the On/Off
switching the MP02 off. button, and then select Yes when
• Select a language by using the Up and prompted.
Down arrows to scroll through the list.
When the desired language is
highlighted, press to enter.
• Select the clock format by using the Up
and Down arrows again to highlight the
desired format, and then press to
enter.
• Current time: enter the hours, either
with the Up and Down arrows or the
number keys. When the correct value is
shown, press to enter. Repeat for
the minutes value.
to unlock it. • From the Main menu, select Settings, current PIN and press , twice.
year setting highlighted. then Date and Time. Up and Down keys.
To ascertain whether automatic time and The current time and format will be
date setting is available, either contact Setting the time manually • • When the required time zone is
displayed within the menu. indicated, exit by pressing the
the network provider or try entering a • Ensure that manual time setting is
Select Time, then Format. This will key.
time that is slightly inaccurate and see if activated, as described above. •
The MP02 functions The operating system language The input language
in the following This affects every aspect of the MP02 apart
from text entry. It can be set to function in
This refers to the language that is used for
creating Notes, messages, etc.
languages: the following languages: The input language can also be set via the
Danish, Dutch, English, Finnish, French, Preferences menu, but it can also be quickly
German, Greek, Italian, Japanese, Norwegian, changed, while text is being entered, by
Russian, Spanish, Swedish. long-pressing the Hash key. As well as
affecting the predictive text, this provides
⏤ To set the operating system language
access to diacritics (e.g. Québec rather than
• From the Main menu, select Settings, then Quebec).
Preferences.
It can be set to the following languages:
• The currently-selected OS language will be
displayed within the menu. To change it, Arabic, Chinese (simplified), Danish, Dutch,
select it and then choose the new language English, Finnish, French, German, Greek,
from the list. Hindi, Italian, Japanese, Norwegian,
Portuguese Russian, Spanish, Swedish.
If the OS is set to a language that cannot be
understood, the list of Languages can be
accessed by following this sequence of key
presses:
End/ /Down x5/ /Down x2/ x2
If this does not work, switch the phone off
and back on again, and then repeat the
sequence.
Forced restart The rest of the phone (Settings, Notes, it elsewhere. (Always have at least two
Messages, etc.) are also not affected. separate copies of important data.)
If the MP02 stops responding, long-press See p 37 for information on how to do
the On/Off button for at least ten Warning: This process cannot be
cancelled or undone. this.
seconds. Also, ensure that it is within the
stated minimum and maximum operating • From the Main menu, select Settings, • From the Main menu, select Settings,
temperatures. then Reset. then Reset.
Select Reset contacts. • Select Factory reset.
If this does not solve the problem, please •
contact Punkt. Customer Services. • Confirm when prompted. • Enter the phone passcode if passcode
protection has been activated.
Deleting all Contacts Deleting everything • Confirm when prompted.
This will cause all information to be This will cause everything on the phone
deleted from the phone’s Contacts to be deleted, including any vCard copies After a reset
directory. of the Contacts directory. When the phone is restarted, it will be
Any vCard copies of the Contacts ⏤ To remove all user settings and necessary to go through the standard
directory stored on the phone will not be permanently delete all user data and setting up procedure again.
deleted. These can be deleted by vCard files.
connecting the MP02 to a computer,
Warning: This process cannot be
either immediately after backing up or at
cancelled or undone.
a later point, or by doing a total reset as
described in the next section. For more • Create a backup copy of the Contacts
information on vCard copies, see p 37. For list, export it to a computer, and then
maximum security, overwrite these files. delete it from the MP02 (and any
Contact Punkt. for more information on others that may exist). Make a copy of
how to do this. the most recent backup file and store
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 26
Phone information
then Connectivity, then Bluetooth. the Back key and use the keypad to
• exchange contact details with another enter the new name.
device. • If Bluetooth is off, select Turn on.
• Press the key to save the new
A simple set-up process is required to • Next, select Devices, then Search for name.
enable a Bluetooth connection with new devices.
• The process can be cancelled by
another device. Select a device to pair with.
•
repeatedly pressing the Back key (the
A USB-based earpiece or pair of • Follow the on-screen instructions. A name will appear to be deleted, but no
headphones can also be connected via the code number will be displayed; select changes will be saved).
USB socket. Pair if it matches on both devices.
• The devices are now paired.
letter of the desired word, and press it and press the applicable key repeatedly
and then deleting the space. Predictive and fairly quickly until the desired
once – ignore whatever letter appears texting can be reactivated in the same
on the screen. Repeat for the second character to be shown on the screen. If
way, as desired. the desired character is missed, keep
letter, and so on, always with a single
press. (There is no time constraint.) • If a word is entered that does not exist pressing the key to go round again.
in the predictive text dictionary, the • When the desired character is
• The MP02 will provisionally create a MP02 will offer the option to add it. displayed, wait until the cursor
word on the main screen, while also Press the key to do this, otherwise (immediately to the right of the letter)
offering a series of words in the word simply continue entering text. disappears and then reappears. The
bar at the bottom (including the
As an example, with the target word as displayed character will now be entered
inserted word, which will be
“prediction” the following routes are and any further key presses of that
highlighted). Scroll through the
possible. same key will display a new character.
suggested words and/or continue to
enter letters. (It is important to • 7733 plus lots of scrolling • Pressing a different key at any time will
remember which letters have been immediately cause the preceding
entered.) • 77334 plus rather less scrolling character to be entered.
• “Junk words” may be generated. This is • 773342 with brief scrolling • If a mistake has been made, the
a necessary side-effect of the word character can be deleted by briefly
• 7733424, no scrolling required
compression system. pressing the Back arrow and the process
• (The MP02 will modify its predictions can be repeated.
• When the correct word is shown (and after being used for a while, so the
highlighted), enter it into the text by above outcomes may vary slightly.)
pressing “0”. This will also add a space
after the word. Alternatively, the word
can be selected without adding a space
by pressing .
one of the entries will not be replicated in information (see above), select Yes (if select Send. (For more information • Select Manage contacts, then Restore
the other. appropriate). about text messages see p 51.) Contacts.
• Select the .vcf file that has just
arrived, and then select Yes.
Backup files are created in vCard format Manage contacts, then Restore contacts.
computer locate the vCard file and copy it to an
(.vcf – Virtual Contact File). Each file is appropriate destination on the • Select the vCard file that has just
given a name according to the current • Use a USB-C to USB-A cable to been copied across, and then select
connect the MP02 to a suitable computer. Delete it on the MP02
date and time, preceded by “Punkt”. For (optional). Yes.
example, a backup file computer (see above).
• Open the Status menu, and select o Follow the computer’s required
created on 12th September 2018 at procedure for disconnecting the
14:35:07 has the name USB connection, then select Sync mode.
MP02.
• Copying to a Windows computer:
“Punkt20180912143507”.
during calls. Speed-dial numbers The “1” key is for calling voicemail, as
The number keys can each be allocated a indicated by its audio-tape symbol. For more
phone number, which can then be called with information about accessing voicemail, see
a single touch. This set up via the MP02’s page 40.
Shortcuts feature.
• For information about assigning
speed-dial numbers, see page 36.
• To call a speed-dial number, press and
hold the applicable number key.
its volume is set to zero), and the • To reject a call and block the caller’s then Calls, then Call waiting.
vibration alert will be triggered (unless it number, press the Down key and • Select Activate or Deactivate.
has been deactivated). For more select Block number.
• Use Query status to check that Call
information about the ringtone and Using phone-based automated Waiting is functioning.
vibration alert, see p 23.
services ⏤ Dealing with an incoming call while on
• To answer an incoming call, press the a call already
Call key. If a Pay As You Go management service,
an automated switchboard, a voicemail • To answer the new call, press the Call
• To reject a call, press the End key. key.
service, a telephone banking system or
• To silence the ringtone and still the similar requires the user to press keys on • To see other options, press the Down
vibration alert, press the Down key their phone during a call, and a text key.
and select Silent. (Nothing else will message is received at the same time, ⏤ Making a new call while on a call
change: the caller will continue to hear clear the screen by opening the Options already
a ringing tone and the call can still be menu and selecting Dismiss.
answered in the usual way.) • Highlight a number in the Contacts,
Ending a call and press the Call key. The first call
• To reject a call but send a text
To end a call, press the End key. will be put on hold.
message to the caller, press the Down •
key, select Send message, and then To switch between the two calls, press
Two calls simultaneously
•
either select one of the template the Down key and select Swap calls.
messages or New message, write a The MP02 is capable of handling two calls ⏤ Putting a call on hold
message and press the key to send at once, if the network provider offers a
Call Waiting service. During a phone call a • To put a call on hold, press the Down
it. key and select Hold.
second call can be begun or an incoming
• To reject the call and set a Reminder call accepted. • To resume the call, press the Call key.
to call back, press the Down key and
select Remind me, and then choose
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 39
Calls II
Voicemail • The access number will now be called. Diverting incoming calls automatically – use the Down key to
Voicemail allows callers to leave a voice Follow the network provider’s The network provider’s system can scroll through it to access menu
message when their call is not answered, automated instructions for setting up usually be set to divert calls to another options below.
or when the MP02 is switched off or out and using their voicemail service. number, or to their voicemail service. • Select Update to send the number to
of network coverage. It is handled by the • Press the End key to finish the call. Contact them for more information on the network provider. Alternatively,
network provider. this. press the Back key or select Cancel to
To turn voicemail on or off, set an The following situations can be set to exit the procedure and leave the
outgoing message for callers to hear, trigger a call diversion. network provider’s settings
listen to incoming messages, etc., it is unchanged.
• When a call is not answered.
necessary to call a voicemail access phone ⏤ Activating/deactivating call diversion
number that is specific to the network • When the MP02 is busy on another
call. • Use the Down key to scroll through
provider. Contact them for more
the destination phone number, and
information about how to use this When the MP02 is unreachable
•
select Turn on or Turn off.
service. (switched off or out of network
coverage). • Call diversion can be turned off
The network provider’s voicemail
completely by selecting Cancel all
number can be saved in the MP02 for All calls.
•
diversions.
instant access to voicemail services.
⏤ Setting up call diversion ⏤ Confirming call diversion
⏤Setting the voicemail access number
• From the Main menu, select Settings, • To check with the network provider
• From the Main menu, select Settings, then Calls, then Divert calls.
then Voicemail. that call diversion is functioning,
• Select a trigger situation, as described select Cancel all diversions, then Query
• Enter the network provider’s above. status. (No settings will be changed.)
voicemail access phone number.
• Enter the destination number, either
⏤ Accessing voicemail manually or from the Contacts list. If
• From the Home screen, long-press there is already a number entered –
the “1” key (marked with a symbol the network provider’s voicemail
that represents audio tape). number may have been set
Call history
It is possible to view a list of calls that have • Pressing the key will bring up a list of
been made or received, including missed options: call the number, send a text
calls. message, add the number to the MP02’s
Contacts list or amend its associated
• From the Home screen press the Call key.
information if already entered, or delete
• Callers will be identified by their phone this call from the Call history. A full list
number, or their name if they are in the of calls made to/received from that caller
MP02’s Contacts list. A small number in a can be viewed by selecting the top entry
circle will show how many times a call has in this sub-menu.
been made to or received from that caller.
• To make a call to a number listed, select
it and press the Call key again.
• If additional numbers have been entered will defer to the network provider’s
during the call, e.g. for navigating an The supplied USB-C earpiece, or another settings.
automated switchboard, these will need to compatible product, can be plugged directly
be cleared first. This can be done by into the MP02’s USB socket.
pressing the Back key; the call connection
will not be affected.
switched off. When the Alarm is sounding, press then World Clock, then Add location.
⏤ To select a different time zone •
the End key to silence it (or the Back Choose whether to specify a location
Ensure that the MP02 has sufficient From the Main menu, select Settings,
•
•
key to activate the snooze feature). via a map or a list of city names. If
battery life when setting the alarm. then Date and Time. Alternatively, press the Down arrow using the map, first use the Up and
⏤ Creating a new alarm setting • The current time zone will be and choose Stop or Snooze. Down keys to highlight a region and
• From the Main menu, select Clock, displayed within the menu. • If the snooze feature is activated, the press the key to expand it. Next,
then Alarm, then New. • To change this, select it and then alarm will sound again after ten use the Up and Down keys again to
• Use the number keys or the Up and move across the map by using the Up minutes. highlight a city and finish by pressing
Down keys to enter the desired time, and Down keys. the key.
It has been clearly shown that the best way
and to specify AM or PM if applicable. • When the required time zone is to sleep effectively is to use a dedicated alarm • The newly-selected city will appear in
Use the and Back keys to move indicated, exit by pressing the key. clock, rather than a phone, and to not use a the list of countries within the main
between the settings and then to snooze option. While the MP02 is much less World Clock page. It is possible to
⏤ Using previously-defined alarm
move through to the next step. of a disturbance to sleep than a smartphone have cities that share a time zone on
settings
• Alternatively, from the Home screen, is, like any phone its alarm feature should the list together. (If a city cannot be
• From the Main menu, select Clock, ideally just be used as a travel alarm clock selected, this means that it is already
enter the desired alarm time in
then Alarm. and for situations other than waking up from on the list.)
24-hour clock format (even if the
phone is set to 12-hour format) and • Select the desired alarm setting. sleep. • To remove a city from the list, select it
select Set alarm. Settings that are marked with a filled and then select Delete. A Delete All
circle are set to go off, settings that option is available at the top of the list.
are marked with an empty circle are
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 44
Clock features
Timer will reopen the Timer window.
The Timer feature is a countdown alarm; • To stop the countdown and either set
at the end of the specified length of time a new time or return to the Clock
an audio signal will sound (unless the menu, select Reset or Cancel from the
MP02’s Master Volume has been set to Options menu.
zero or Silent mode has been activated). • When the countdown has finished,
⏤ Setting the Timer press the End key or select Dismiss or
Cancel from the Options menu.
• From the Main menu, select Clock,
then Timer. Stopwatch
• Use the number keys or the Up and The stopwatch feature allows the user to
Down keys to specify the length of measure how long something lasts.
time before the audio signal sounds. ⏤ Setting the Stopwatch
Use the and Back keys to move
between the individual settings. • From the Main menu, select Clock,
then Stopwatch.
• Press with the seconds highlighted
to begin the countdown. • Press the key to start the
Stopwatch.
• Alternatively, from the Home screen,
enter the desired countdown time • Pressing the key again will pause
(e.g. 12345 for 1 hour, 23 minutes and and then restart the Stopwatch.
45 seconds) and select Set timer. • To reset the time back to zero, first
• The Timer feature can be exited while pause the Stopwatch and then press
still in operation by pressing the End the Back key.
key (or the Back key); the countdown • Unlike with the Timer, pressing the
will continue and a Notification will End key when the Stopwatch is
be set, showing how much time running will close it completely and
remains. Selecting this Notification delete its reading.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 45
Calendar
The MP02 can be used to provide cancel this process, repeatedly press The external device can now connect
another device (e.g. a tablet or laptop the Back key (the network name or with the MP02 via Wi-Fi, Bluetooth or
computer) with an Internet connection, password will be deleted from the USB. USB is the fastest, and also uses
via 4G (LTE). screen, but this will have no effect on the least battery power (in each device);
This linking process is called tethering. what is saved in the phone). it will usually require software to be
Most mobile phone contracts permit it, Alternatively, press the Up or Down installed in the second device.
but some do not; contact the network key repeatedly.
service provider for more information if • The security protocol is WPA2 PSK;
required. this cannot be changed.
⏤ To make the MP02’s Internet • Tethering can also be quickly turned
connection available to other devices on or off via the Status menu.
• From the Main menu, select Settings, • The MP02’s OTA Wi-Fi connection
then Connectivity, then Tethering. feature (as used for connecting to an
• Select Turn on. external Wi-Fi router for
downloading new software) will
• If desired, the MP02’s network name automatically switch off when
and password can be changed. To tethering is activated.
means that all messages sent to and • The message can be opened by l. key while it is highlighted. Press the
• Write the message, and press the selecting the Notification, by pressing Back key to return to the message
received from the same number/Contact key when finished.
are presented together in chronological the key while the full-screen thread.
order, newest at the bottom. Sent • Check that the recipient is correct and announcement is showing, or by
messages are shown on the right of the – with the recipient highlighted – press pressing the Messages key and
screen and received messages are shown the key. The message will now be selecting the sender in the list of
on the left. sent. Messages that will appear.
See p 11 for information about using the • If there is a problem with sending the • The Notification can be exited by
MP02’s keypad. message (e.g. lack of mobile signal), it pressing the End or Back key; the
will be saved as a draft message and a full-screen announcement can be
Notification will be created, offering dismissed in the same way, or by
the option of retrying. selecting Dismiss in the Options menu.
• The sender of the message can be
called by selecting their message in the
list and pressing the Call key.
Punkt. MP02 Mobile Phone - Instruction manual 23.07.2019 51
Text messages (SMS) I
Replying to a message Forwarding a message • Select Delete, and then select Yes to (See p 11 for information about using
confirm. the MP02 keypad.)
• Press the Messages key and select a • Select a single message from a thread,
message thread. as described previously. ⏤ Deleting a whole message thread • Open the Options menu by
Press the Messages key. long-pressing the Down key to reach
• Enter text in the “New message” box • Open the Options menu and select •
the end of the text and then pressing
(see p 11 for information about using Forward. Select a Contact/phone number from
•
it again.
the MP02 keypad) and press the Down • Add a recipient from the Contacts list the Messages menu.
key to access the Options menu. • Select Save, or to cancel press the End
and/or by manually entering a phone When the thread appears, open the
•
key.
• With the name of the recipient number. Recipients will be marked Options menu and select Delete
highlighted, press the key again. with a filled circle; remove them by thread, and then select Yes to confirm. ⏤ Creating a new template
The reply will now be sent, and a copy selecting them again. From the Messages Menu, select
•
Using message templates •
will appear at the bottom of the • Select Save. Templates and then New template.
message thread. Message templates are pre-composed
Check the recipient(s) and press the • Enter the required text.
•
pieces of text that can be used as or
• To add recipients, select Edit recipient. key. inserted into text messages. The MP02 • With the cursor at the end of the
Select Contacts as required, and/or • The message will now be saved. comes pre-loaded with a small collection entered text (long-press the Down key
highlight Add number and enter a of templates; these can be edited and if necessary), open the Options Menu
phone number manually. Recipients of Deleting messages and select Save. To abandon the
saved for future use in their amended for,
this message will be marked with a ⏤ Deleting a single message and new templates can be created. process, press the Back key or select
filled circle; pressing the key while Templates can also be deleted if no longer Delete.
• Press the Messages key.
a recipient is highlighted will required.
Select a Contact/phone number from ⏤ Deleting a template
alternately remove them from and •
return them to the list. the Messages menu. ⏤ Editing an existing template • From the Messages Menu, select
Select the message to be deleted from Open the Messages Menu by pressing Templates, and then select a Template
• The other available options are to save • •