Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3 STANDARD-STOCKED PRODUCT
AMS 4880-C95510
C as t P r o d u cts
Cast
|
Rectangles: Up to 15"
AM S 4 8 8 0 -C 9 5 5 10
Standard Lengths: 24"
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or
structural shape, flats/rectangular bar
Typical Uses
Industrial bearings requiring abrasion resistance/good ductility/retention of hardness at moderate temperatures,
bushings, hydraulic seal components, landing gear bushings and bearings
Chemical Composition
Cu% Sn% Zn% Fe% Ni%1 Al% Mn%
Machinability
Copper Alloy UNS No. Machinability Rating Density (lb/in³ at 68 ˚F)
C95510 50 0.272
14315 State Route 113 • Wakeman, OH 44889 • Phone 800.626.7071 • Fax 724.538.3956
AMS 4880-C95510 continued
AM S 4 8 8 0 -C 9 5 5 1 0
Mechanical Properties
Tensile Strength, min Yield Strength at 0.2% Elongation, in 4D, Brinell Hardness Remarks
Offset, min min
105.0 724 62.5 431 9 192 to 248 Castings <4.0, Heat Treated
95.0 655 56.0 386 9 192 to 248 Castings 4.0+, Heat Treated
|
Cas t Pr o d u cts
14315 State Route 113 • Wakeman, OH 44889 • Phone 800.626.7071 • Fax 724.538.3956