Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PROPERTIES:
Chromium alloyed cast iron with high abrasion resistance.
To ensure the highest possible impact resistance a heat treatment must be carried out.
The recommandations given in V 2821-xx may be used as guidance.
The structure has to be with Fe-Cr-carbides in a martensitic matrix.
The composition is well inside the limits stated in the alternative standards referred to.
Instructions:
FLS, Instruction V-2821-xx
Cast lining parts
CHEMICAL COMPOSITION:
Dim, mm % C max % Si max % Mn max or % P max % S max % N max % Al min
or range or range range or range or range or range or range
1.7-1.9 1.0 0.8-1.2 - - - -
Dim, mm % Cr max % Mo max % Ni max % V max % Nb max % Ti max % Cu max % Other max
or range or range or range or range or range or range or range or range
14.0-16.0 0.7-0.8 - - - - -
DELIVERY CONDITIONS:
To be delivered according to Instruction V 2821-xx.
When taking in new suppliers a sample sized 100x100x80 mm must be shipped to the RDL-Metallurgy
department for approval before a purchage order can be placed. The sample must be followed by
documentation stating chemical composition, hardness and heat treatment.
Revisions:
Rev. No Rev. Date Change Responsible
0,60 10-02-2002 Prepared & Approved changed AnJo
References to Alternative Standards added to supplier version.
0,70 15-01-2004 Standards updated. Rev_no updated: An extra decimal place added AsK