Sei sulla pagina 1di 10

Revised Bill Of Quantity

Name of work : CONSTRUCTION OF SHOOTING RANGE WORK AT GREEN PARK


STADIUM KANPUR
1. Date of Calling Tender : 5. Cost of Tender :
2. Date of receiving Tender : 6. Validity period : Month
3. Date of Opening Tender : 7. Time of Completion : Month
4. Earnest Money : Lacs
Rates
Sl
Item of work Qty. Unit
No. In Fig. In Words
1 2 3 4 5 6

Earth work in excavation by mechanical means


(Hydraulic excavator) / manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10
sqm on plan), including dressing of sides and ramming Rupees One Hundred Ten
1 of bottoms, lift up to 1.5 m, including getting out the
29.45 Cum 110.00 Only
excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m. All kinds of soil.PWD
SCH. 251

Filling available excavated earth (excluding rock) in


trenches, plinth, sides of foundations etc. in layers not
Rupees Seventy Five
2 exceeding 20cm in depth, consolidating each deposited 3.02 Cum 75.00 Only
layer by ramming and watering, lead up to 50 m and lift
upto 1.5 m. PWD SCH. 255
1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate Rupees Four Thousand
3 40 mm nominal size). PWD SCH. 281
38.83 Cum 4800.00 Eight Hundred Only
Supplying and filling in plinth with local sand under
Rupees Six Hundred
4 floors, including watering, ramming consolidating and 21.58 Cum 684.00 Eighty Four Only
dressing complete(.D.S.R. No. 2.27 )

Treatment of soil under existing floors using chemical


emulsion @ one litre per hole, 300 mm apart including
drilling 12 mm diameter holes and plugging with Rupees Two Hundred
5 cement mortar 1:2 (1 cement : 2 coarse sand) to match
0.00 Sqm 200.00 Only
the existing floor. With Chlorpyriphos/Lindane E.C.
20%with 1%concentration.

Providing and laying in position machine batched and


machine mixed design mix M-25 grade cement concrete
for reinforced cement concrete for reinforced cement
concrete work, using cement content as per approved
design mix, including lifting of concrete to site of laying
but excluding the cost of centering, shuttering, finishing Rupees Six Thousand Six
6 and reinforcement, including admixtures in
8.53 Cum 6600.00 Hundred Only
recommended proportions as per IS: 9103 to aceelerate,
retard setting of concrete, improve workability without
impairing strength and durability as per direction of
Engineer-in-charge. PWD SCH. 283

P/F Mild steel or iron in plain work such as reinforced


concrete or reinforced, brick work (when not included in
over all rates ) wrought to required shape as necessary Rupees Five Thousand
7 including bending for proper completion of the work
1.18 QTL 5021.00 Twenty One Only
and including supply of all steel and and over lapping &
hooks.
Providing and laying autoclaved aerated cement blocks
masonry with 100 mm thick AAC blocks in super
structure above plinth level up to floor V level in cement Rupees Five Thousand
8 mortar 1:4 (1 cement : 4 coarse sand ). The rate includes
31.52 Cum 5100.00 One Hundred Only
providing and placing in position 2 Nos 6 mm dia M.S.
bars at every third course of masonry work.

Providing and applying 12 mm thick (average) premixed


formulated one coat gypsum lightweight plaster having
additives and light weight aggregates as vermiculite/
perlite respectively conforming to IS: 2547 (Part - 1 & Rupees One Hundred
9 II) 1976, applied on hacked / uneven background such
111.00 Sqm 170.00 Seventy Only
as bare brick/ block/ RCC work on walls & ceiling at all
floors and locations, finished in smooth line and level
etc. complete.

15 mm thick plaster with cement mortar in propotion of


1:3 cement & approved coarse sand with all Rupees One Hundred
10 materials,labour ,tools and plants etc. required for 36.00 Sqm 150.00 Fifty Only
proper completion of the work .

Providing & applying white cement base Putty of


average thickness 1 mm of approved brand and Rupees One Hundred
11 maufacturer over the plastered wall surface to prepare 36.00 Sqm 111.34 Eleven and Thirty Four
the surface even and smooth complete (Exterior walls) Paisas Only
( (DSR-13.80)

Distempering with oil bound distemper of approved


brand and manufacture to give an even shade : New
12 work (two or more coats) over and including water 111.00 Sqm 70.00 Rupees Seventy Only
thinnable priming coat with cement primer ( (DSR
13.83.1. + 13.83.2))

Finishing walls with textured exterior paint of required


shade : New work (Two or more coats applied @ 3.28 Rupees One Hundred
13 ltr/10 sqm) over and including priming coat of exterior 36.00 Sqm 145.00 Forty Five Only
primer applied @ 2.20kg/10 sqm ( DSR 13.47.1)

Providing and fixing 18 mm thick gang saw cut, mirror


polished, premoulded and prepolished, machine cut for
kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade,
colour and texture laid over 20 mm thick base cement
Rupees Four Thousand
14 mortar 1:4 (1 cement : 4 coarse sand), joints treated with 9.75 Sqm 4200.00 Two Hundred Only
white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete
at all levels.
(DSR-8.2.2.2) PWD SCH. 16 N S

P/F edge moulding to 36 mm thick including increasing


the thickness to 36 mm with cost of granite & epoxy
Rupees One Thousand
adhesive with pigments on granite counter , vanities
15 etc. machine polishing to edge to give high polish finish 0.00 Rmt 1125.00 One Hundred Twenty
Five Only
etc. complete .as per design approved by engineer in
charge (M.R.)

16 Dismantling of old Hostel Building .


a). Dismantling sundried brick work including stacking
16.1 of dismantled material .Disposal as the Direction of E/I ( 37.95 Cum 70.00 Rupees Seventy Only
PWD-691)
b).Dismantling RCC including stacking and Disposal as Rupees Eight Hundred
16.2 the Direction of E/I (PWD-694) 20.00 Cum 800.00 Only
Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded built
up standard tubular sections/ appropriate Z sections and
other sections of approved make conforming to IS: 733
and IS: 1285, fixing with dash fasteners of required dia
and size, including necessary filling up the gaps at
Rupees Four Thousand
junctions, i.e. at top, bottom and sides with required
17 EPDM rubber/ neoprene gasket etc. Aluminium sections 0.00 Sqm 4490.00 Four Hundred Ninety
Only
shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / paneling, paid
for separately) : Anodised aluminium (anodised
transparent or dyed to required shade according to IS:
1868, Minimum anodic coating of grade AC 15)

Steel work welded in built up sections /framed work


,including cutting ,hoisting ,fixing in position and
applying a priming coat of approved steel primer using Rupees Sixty Four and
18 structural steel etc. as required in gratings ,frames ,guard 0.00 Kgs. 64.89 Eighty Nine Paisas Only
bar ,ladder railings,brackets , gates and similar works.
Grills((DSR-10.2))

Providing and fixing double scaffolding system (cup


lock type) on the exterior side, up to seven story height
made with 40 mm dia M.S. tube 1.5 m centre to centre,
horizontal & vertical tubes joining with cup & lock
system with M.S. tubes, M.S. tube challies, M.S. clamps
and M.S. staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable
condition for the required duration as approved and
Rupees One Hundred
removing it there after .The scaffolding system shall be
19 stiffened with bracings, runners, connection with the 84.00 Sqm 109.24 Nine and Twenty Four
Paisas Only
building etc wherever required for inspection of work at
required locations with essential safety features for the
workmen etc. complete as per directions and approval of
Engineer-in-charge .The elevational area of the
scaffolding shall be measured for payment purpose .The
payment will be made once irrespective of duration of
scaffolding.
(DSR )

Painting two coat over priming coat (but including cost


of priming coat) on steel and other metal surfaces up to
10 cm. width or girth or small articles not exceeding
0.10sqm in area white superior synthetic enamel such as
LUXOL3,Hi-gloss apcolite superlac, DULUX specified
Rupees One Hundred
20 brushing to give an even shade and including cleaning 150.00 Sqm 112.00 Twelve Only
the surface of all dirt,dust and other foreign matter sand
papering and stoping including cost of all materials,
labour tools and plants etc. required for proper
completion of the work. (Surface area of steel members
to be measures)(PWD-641 + 642+ 645)
Providing and laying vitrified floor tiles any standard
type in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08%
and conforming to IS : 15622, of approved make, in all
Rupees One Thousand
21 colours and shades, laid on 20 mm thick cement mortar 163.00 Sqm 1400.00 Four Hundred Only
1:4 (1 cement : 4 coarse sand), including grouting the
joints with white cement and matching pigments etc.,
complete. Size of Tile (600x600 MM to 1500 x 750 MM
)DSR PWD SCH. 15 NS

Providing and fixing Ist quality ceramic glazed


wall/Floor tiles conforming to IS: 15622 (thickness to
be specified by the manufacturer), of approved make, in
all colours, shades except burgundy, bottle green, black
Rupees One Thousand
of any size as approved by Engineer-in-Charge, in
22 skirting, risers of steps and dados, over 12 mm thick bed 22.00 Sqm 1130.00 One Hundred Thirty
Only
of cement mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment
of matching shade complete.(DSR )

Rupees Six Thousand


Two Hundred Ninety
23 Supply & Fixing of WC . ( DSR 17.68) 0.00 Each 6290.85 and Eighty Five Paisas
Only

Rupees Two Thousand


Two Hundred Ninety
24 Supply & Fixing of Counter Top Basin ( DSR 17.7.1) 0.00 Each 2298.55 Eight and Fifty Five
Paisas Only
Supply & Fixing of Pipe Line Work for fixing of WC & Rupees Twenty
25 Basin . 0.00 Job 20000.00 Thousand Only

Supply, Fabrication, erection of Arched Shape in span


of 40 Mtrs cantillivered MS Large Span Space Frame
structure having lattice Grider Trusses/ Purlin made of
structural Mild Steel hollow RHS & SHS ISI mark of
Apollo/Swastik /Surya make as per drawing and design
in Arch shape at centre in shape and design as per
approved drawing & design as per approved drawing &
design including cutting ,welding ,jointing fabricated
from standard steel section conforming to relevant IS
Rupees One Hundred Ten
26 codes with minimum yield strength of 24 N/sq. mtr. The 4812.61 Kgs 110.00 Only
steel sections shall be totally protected after fabrication
with one coat of RO Primer The work includes supply ,
fabrication and erection upto 23 Mtr. Height ,as per
approved drawing including supply & fixing of Base
Plate ,cleats angles,stiffeners duly cut to size as per
required shape and design including make holes
,grinding edges ,make threads in foundation bolts
complete job with all matertial ,labour ,T & P ,lead lift
complete.( Analysis )

Supply & Fixing of Single Layer Multi colour MS Sheet Rupees One Thousand
27 . In Arched Shape (Analysis ) 357.00 Sqm 1600.00 Six Hundred Only
Rupees One Thousand
Four Hundred Sixty
28 Supply & Fixing of Chain Link Jali . (Analysis ) 0.00 Sqm. 1467.78 Seven and Seventy Eight
Paisas Only
Rupees Twelve Thousand
29 Shooting Targets( MR ) 0.00 No.s 12000.00 Only
Rupees One Thousand
30 Shooting Table in Board and Laminate ( MR) 0.00 Sq.Mtr. 1960.00 Nine Hundred Sixty
Only
Rupees Five Hundred
31 LIGHT & FAN POINT (SOR PWD) 0.00 NOS 580.00 Eighty Only
Rupees Five Hundred
32 Exhaust Fan Point (SOR PWD) 0.00 NOS 580.00 Eighty Only
Rupees Two Hundred
33 6AMP. SWITCH PLUCK (SOR PWD) 0.00 NOS 265.00 Sixty Five Only
Rupees Five Hundred
34 POWER POINT (SOR PWD) 0.00 NOS 595.00 Ninety Five Only
Rupees Four Hundred
35 (3.5C*25) ALUMINIUM ARMERD 0.00 RM 402.00 Two Only
Rupees Two Thousand
36 WALL FAN 0.00 NOS 2176.00 One Hundred Seventy
Six Only
Rupees One Thousand
37 FRESH AIR FAN 0.00 NOS 1380.00 Three Hundred Eighty
Only
Rupees Eight Hundred
38 TUBE LIGHT WITH FITTING 0.00 NOS 840.00 Forty Only
Rupees Two Hundred
39 T.P.N MCB(32 AMP) 0.00 NOS 250.00 Fifty Only
Rupees Two Hundred
40 T.P.N MCB(25 AMP) 0.00 NOS 250.00 Fifty Only
Rupees Two Hundred
41 S.P MCB(20AMP) 0.00 NOS 250.00 Fifty Only
Rupees Two Hundred
42 S.P MCB(16AMP) 0.00 NOS 250.00 Fifty Only
Supply and fixing of flush/surface mounting distribution
boards without MCB with additional metal door Rupees Four Thousand
43 complete in all respects.(CAT: A) 0.00 NOS 4200.00 Two Hundred Only
6 Way TPN

I quote my rate
Contractor's ……………………… percent below/above the above mentioned/Departmental rates
Name………………………..………….
& Address…………...………………………..
……… Contractor's Signature

Officer Officer Officer Recommending Officer


Calling Tender Opening Tende Tender Accepting Tender
GREEN PARK

Amount

3239.50

226.50

186384.00

14760.72

0.00

56298.00

5924.78
160752.00

18870.00

5400.00

4008.24

7770.00

5220.00

40950.00

0.00

2656.50

16000.00
0.00

0.00

9176.16

16800.00
228200.00

24860.00

0.00

0.00

0.00

529387.10

571200.00

0.00

0.00
0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

1908083.50

Accepting Tender

Potrebbero piacerti anche