Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Lectra System
2. Gerber System
3. Gemini CAD/ Euro CAD / Morgan CAD
4. Optitex
5. TukaCAD
6. Winda
7. Rich Peace
8. Investronica
9. GT CAD
10. IMA CAD
11. Astor / RED Tree
12. Assyst Bullmer.
13. Etc.
. Introduction: AccuMark and Pattern Design System (with PDS 2000/Silhouette 2000)
This introduces you to the workspace of Computer Aided pattern design program with
AccuMark PDS 2000 (developed by Gerber Technology, Inc.). You will learn to use the following tools:
1 Hardware
The hardware required for PDS 2000/Silhouette 2000 includes:
• Computer/ Monitor/ Printer/ Mouse/ Keyboard
• Plotter (optional)
• Security Device
• Digitizer (grading/system)
• Silhouette Table (optional) - Used to input and modify patterns generally with a pen.
The table is adjustable by height and angle. There is a 2” to 3.5” dead zone around the table
perimeter. The clear vinyl surface is for use with push pins. Placement of the menu area is
changeable depending on cursor location.
• Pen/Stylus (optional) - Used with the Silhouette Table.
2 Software program
The software programs and information include:
• AccuMark Explorer - Displays the Explorer application, which allows you to
manage,
Create, and Import/Export data.
• AccuMark Find - Displays the Find application, which lets you search for specific
data items.
OTE : You must verify that the storage area is set to “Your Name” EVERY TIME that you get
into ANY of the Gerber programs. If you do not do this, you will very likely lose your work!!!
OTE : You CANNOT create storage area in the pattern design 2000. If you need a new storage
area, then first you must go to AccuMark Explorer (If old version, go to System Management).
.2 Open files
) Go to File menu-> Open. Select your name folder. Find the basic pieces that you imported.
Screen layout Screen layout can be modified, if you want. Go to view Screen layout
Menu bar
Icon bar
Tool bar
Status/ Prompt user
bars Input
Info Bar
• Menu Bar: Dropdown menu bar includes file, Edit, View, Point, Line, Grade,
Measure, Draft, Window, Help.
• Tool Bar: Tool bar buttons provide a quick way to access commands without
going through the menus.
• Info Bar: The Info bar provides information about the current piece information,
settings and pieces in the work area, such as name, size, perimeter type, and measurement
type.
• Icon Menu: The Icon menu displays all pieces of every model or style currently open in
the current work area.
• User Input Box: User input box shows interactive communication (giving you
instruction s you select a command) while you are working on pieces. You can type any
value or
choose cursor mode in the user input box.
• Prompt Bar: The Prompt bar can be used. This horizontal bar can be positioned above or
below the work area.
Displaying the rulers helps you keep the sizes of the pieces in perspective while
working on them. The unit of measurement depends upon the user environment defined
in the AccuMark user environment.
.5 Cursor shape change
The cursor shape change helps you know what to do next.
Normal mode
command is active.
Zoom In
.6 Piece geometry
Lines, locations on lines, and points are often referred to as piece geometry.
<To see example: Go to View menu-> All Points>
1. Perimeter line
2. internal line
3. Grain/grade reference line
4. Orientation symbol
5. Drill hole (internal line)
6. Graded end of line
7. Notch point
8. Curve point (Non-smoothing point)
9. Mark point
10. End of line point
11. Grade point
12. Smoothing points
.8 Color changes
You can change color change options to tell the status of pieces.
Examples: Black = saved existing pieces
Red = selected pieces
Green = modified but not saved yet.
.9 Tracking information
Tracking information is to display
and edit information of points,
lines, and pieces.
1. ClickRM(to see Look-Up
menu) -> Select Edit Piece Info ->
Tracking Information-> Select a
piece with M(Left Mouse).
starting from a basic rectangle, adding points and lines, and moving points and lines
to get the desired shape, with the desired measurement.
• Draft: A component can be drafted ‘from scratch’ into the computer using the Silhouette
table and the stylus pen.
• Draw: A component can be drawn from an existing pattern into the computer using
the Silhouette table and the stylus pen.
• Digitize: A component can be digitized into the computer using the Digitizing table,
the stylus pen, and an existing pattern.
) If you see Cursor mode, choose Value mode. Select Add Piece to Model/Style . Then,
click work area.
) Enter values: Width is to equal the length of garment from highest point of the shoulder to
hem. Height is to equal ¼ of the total circumference measurement. Type X and Y Values.
When you type in each value you will see +- direction signs.
Widt value: 25”
h= (63cm);
Height= value: 10” (25cm).
Enter piece name. alue= TBack
Enter New Model/Style name: (Tshirts)
) Go to Point menu -> Add Point (Alt+F4).Select point (No smoothing point).
Click RM button to see Look up menu. Choose Dist From Point.
Select origin point on the right side of the segment (shoulder).
Enter distance (from the selected point) into alue input : -3.25 inch: Back neck width.
) o tooint menu -> Add Point (Alt+F4). Select point (No smoothing point).
Click RM button to see Look up menu. Choose Dist From Point.
Select origin point on the right side of the segment (side seam). Enter distance (from the selected
point) into alue input : -10 inch: Armhole depth.
NOTE:
Rectangular is drawn in Clockwise direction. If your desire distance from origin point is
opposite direction of the clockwise, then the value will be minus (-). If same direction, it is then
(+).
.3 Split line
) Select Line tool-> Modify line-> Splitor Ctrl+F10)
)Click each selected points. Then, K
) To align neck width point, go to Point menu-> Modify Points- Align 2 points .
Select Horizontal. Position thumbtacks to define range. Then, select reference point. OK.
) go to Pointmenu Modify points- Modify Single Point.Select the shoulder end point.
Enter value : -1 inch.
.6 Line Merge
) o to theinemenu -> Modify Lines -> Line Combine/Merge (Ctrl+F9)
) Select 2 lines in the Neckline. Then, OK.
) Go to the Point menu Modify Points > Move Smooth Click and hold the points on
the armhole segment, drag to desired armhole shape.
(Or, Go to the Line menu-> Modify Lines->Move Range.)
Go to the Point menu -> Modify Points- Move Smooth (Alt+F11) . Select the neckline and
drag the line to make curve shape.
)Go toinemenu -> Modify-> Smooth.Smooth factor= 0.005 Click armhole and neckline.
hen finished, click Cancel. (Not Ok
button).
.8 Creation of front
) o toinemenu-> odify lines Adjust Length . Select alue mode. Select the center
front line on the copied piece (Tfront). Enter the value: Dist=-3 inch.
) Select the point on the neckline. Click right mouse, and edit the point info. The Point attribute
from “N” to “ S ” (Smoothing). If you don’t see any change, select System Smoothing in the
bottom of window screen.
Then, you will see a line that connects from the center back point to the armhole line.
) Go toeasure menu -> Line Length . Select the across center back line (8.25 inch).
Go to Measure menu-> istance 2pt/Measure finished . Measure the armhole line to the center
back line (e.g. 8.74 inch).
) Go toinemenu-> odify line - ove Range . Choose Value ode in the User Input
box. Select the armhole line. Enter the line move amount value: Dist = the differences (e.g. Y = -
0.49 inch) to make new chest length: 8.25 inch.
) o toile menu-> Save.In the User Input box, select ave Models/Styles.When
you see the
Pop-up menu, choose your model. Then, Ok.
) o send pieces to the menu bar, clickRM mouse-> ookUP menu-> iece to menu.
OTE: Piece to Menu Use to send a piece from the work area to the icon bar. This function
does not save the piece. To save your pieces, you must save model/style or pieces in the right
path!
Go create the sleeve head, Go to Point menu->Modify points-> Move Single Point
. Select a point of the top segment, and type in X value= -2.5 inch.
) Go to the Length menu-> Modify Lines-> Adjust Length to adjust the sleeve opening
measurement to 7.2 inch. Select the end point. Type the Value differences: Dist = –2.45.
Reference point
) Click RM->LookUp menu- Edit point info . Edit these two points: “ S”points.
) o toinemenu -> Modify Lines-> Smooth. Select Armhole cap line. Use thumbtacks to
define range to make smooth line. In the user input box, Smooth Factor= 0.05
) Go to Piece menu-> Mirror piece . Select the center line. In the User Input box, select
Notches(AM) single end. Notch type=2.
) Go toile menu-> Save . Save pieces. Save Model. Send piece to menu.
0) Bring all pieces to the screen. Then, press 3 . Go to File menu-> Print.
Print out this Worksheet 6 and hand-in to me. DO NOT forget write your name!!!
) Save the piece to your style/model. If you do not have style/model, type your new style/model
name in the file name box.
OTE: Be aware of this! Whenever you create your pieces, add to “your” style/model file. This
will be easy way to open all your pieces for one garment set reference. Even if you give a name
to your piece, it dose not mean that your work has been saved. Click Savebutton into the right
path/folder.
) ake sure if pieces are saved in your storage (View >Preferences->Path ). Example:
Open a Model (C: Advanced/Sloper) -> Bring all pieces in the work area. -> Change path to
my storage area (C:Shin)-> Save all pieces.
) o to theilemenu-> Create/Edit Model.
)Select Add pieces. t this time, if you do not
have a model, enter a model name.
Example: Select my path (C: SHIN)->Type
(Basic_Sloper). Click OK.
) Select all pieces that you want to add to the
model.
OTE: Once you create a model/style, you can retrieve the model/style, instead of retrieving
pieces.
OTE:If the system tells you that the piece already exists and you know that you never have
aved this one before, select NOto overwrite and go back and change the piece name in some
way. BE SURE THAT YOU DO NOT OVERWRITE SOMEONE ELSE’S FILE!!!
Practices:
1. Create your storage area. Give a storage name: 06 your first name
Correct patterns (such as piece style information, alteration, grade rule, problems etc.) or
order the cut fabrics to the other manufacturers.
1. Go to File menu ->Import.
2. Open the folder that contains thezipped file.
) Select the zipped file (.zip) and click Open.
) To import all of the items listed, click K. Or, to import specific items, select just the ones
you want and then click K. When finished importing, the system prompts: "Process
ompleted." Click K.