Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
NORD-TEST Cleaner U 87
Features
• AMS 2644 Class 2 non-halogenated cleaner/remover
• Available in spray cans (aerosol) or bulk
• Dries fast without leaving any residue
www.helling.de
info@helling.de
+49 (0) 4122-922-0
Specification Compliance
The NORD-TEST penetrant system has been tested and approved in accordance with
• EN ISO 3452-2
• KTA
The low content of sulfur and halogens was ascertained and confirmed according to
as well as to requirements of
Applications
• The NORD-TEST Cleaner U 87 is being used for surface precleaning prior to
penetrant testing
• Intermediate cleaning and removal of excess penetrant
• Cleaning after penetrant inspection
• NORD-TEST Cleaner U 87 is commonly used in a variety of industries such as
general metalworking, automotive industry, shipbuilding and pressure vessels.
www.helling.de
info@helling.de
+49 (0) 4122-922-0
Further applications are:
• Welds
• Castings
• Forgings
• Pipes and tubes
Properties
Appearance Colorless liquid
Flash point in closed cup 12°C
Corrosive performance For Aluminum alloy AW 7075,
Magnesium alloy AZ-31B,
Steel 30CrMo4: No stains, pitting, signs of corrosion (at
10-fold magnification)
Sulphur content 10 ppm
Halogen content 20 ppm
User Guideline
Method Visible (red/white) penetrant testing
Usage temperature -5°C to +50°C
Penetrant NORD TEST U 88, NORD TEST Rot 3000
Developer NORD TEST U 89
Recommended test panel ASME V (part no. 127.100.000)
1. Spray the surfaces to be cleaned liberally with the cleaner then either wipe off or
allow to air dry, or soak a clean cloth with the cleaner and wipe the part clean.
2. Allow the part to dry thoroughly before applying the penetrant.
www.helling.de
info@helling.de
+49 (0) 4122-922-0
To remove excess surface penetrant:
Packaging
www.helling.de
info@helling.de
+49 (0) 4122-922-0