Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
v e r h ung
® O
O H L A
d a p tors
A
Load or Durability And
Life
e Mot
Increas
Timber
Processing
Construction
OHLA
OVERHUNG LOAD ADAPTORS
®
ZERO-MAX Is A
World-Leading Expert In
Overhung Load Technology
The first complete line of SAE “A” through SAE
“F” mount OHLA overhung load adaptors was
designed by ZERO-MAX. We set the industry
standard with the OHLA design. Today, we
provide immediate shipment of standard models
from stock.
Call a ZERO-MAX technical sales representative now. There’s a model and size OHLA to
handle every design need – or we’ll engineer a special one just for you. 1-800-533-1731
2
Recycling
Forestry
OHLA® INDEX
Model 200 SAE “A” Mount
Applications utilizing SAE “A” 2-bolt mount with ball bearings for motor or pump shafts up to
1 inch in diameter (see page 4).
Model 400
4-bolt mounting (non-SAE) accommodates same loads as the Model 200 with ball bearings
for motor and pump shafts up to 1 inch in diameter (see page 6).
Model 1250 SAE “E” Mount & Model 1500 SAE “F” Mount
Both the SAE “E” and SAE “F” mounts have the same physical size; only the pilot diameter and
bolt circle are different for motor or pump mounting. These models use large spherical-roller
bearings for heavy-duty applications. Input bores are made to customer specifications up to
a 2-1/2" diameter (see page 12).
Custom Models
Modified dimensions and special features are available (see page 13).
3
OHLA® 200
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model* Output Shaft - Keyway Input Bore - Keyway
1.44
4.12 F
AS CAST +.000
Ø 3.250 -.002 INPUT +.002
PILOT BORE Ø 3.251 -.000
4.40
PILOT BORE
2.00
2.125 FULL DEPTH
SEAL
1.156 OUTPUT SHAFT BEARING
.44 1.750
2.312 HOUSING
3/8-16 UNC X .75 DP (4)
5.25 AS CAST
"A" "B"
STANDARD 2.875 .125 +.005
HOUSING -.000
DEEP PILOT 3.000 .250 +.005
HOUSING -.000
4
OHLA® 300
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model* Output Shaft - Keyway Input Bore - Keyway
5.75
4.187
Ø .531 THRU (2) 2.75 3.000
GREASE
FITTING .005 1.38
.120
1.38
F +.002
4.12 Ø 3.251 -.000
AS CAST +.000
Ø 3.250 -.002 INPUT
PILOT BORE PILOT BORE
4.40
+.005
.125 -.000 DEEP
2.125 2.00
FULL DEPTH
5
OHLA® 400
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
5.63
Ø.406 THRU (4) 90 APART ON A Ø3.250 BOLT CIRCLE 2.75 2.875
GREASE FITTING .005 1.25
.120
PILOT RING
3.93 1.38
AS CAST F +.005
1.755 -.000
4.21 Ø 2.500 +.000
-.005
INPUT PILOT BORE
PILOT BORE
.125 +.000
-.005 DEEP
2.125 2.00
FULL DEPTH
6
OHLA® 500
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
1.125
4.94
AS CAST 22.5 F
7
OHLA® 600
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
1.00
.73
F
5.12
AS CAST +.000 +.004
Ø4.000 -.003 INPUT Ø 4.001 -.000
5.78 PILOT BORE
PILOT BORE
1.69
2.750 FULL DEPTH REAR
SEAL
8
OHLA® 800
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
1.50
.83
+.000 F
6.38
Ø5.000 -.003 Ø5.001 +.004
AS CAST INPUT -.000
PILOT BORE
PILOT BORE
7.04 2.69
FULL DEPTH REAR
SEAL
3.375
9
OHLA® 900
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
1.50
6.38 F
AS CAST +.004
+.000 INPUT Ø 5.001 -.000
7.04 Ø5.000 -.003
PILOT BORE
PILOT BORE
2.75
3.375 FULL
DEPTH
FRONT SEAL REAR SEAL
2.125 OUTPUT SHAFT RETAINING RING
.750 4.000 HOUSING
4.250
8.50 AS CAST BEARING
1/2-13 X 1.00 DEEP (4)
10
OHLA® 1100
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
1/4-18 NPT
(2) #8 O-RING BOSS GREASE FITTINGS (2) 3/4-10 X 1.5 DP. 14.50
3/4 - 16 THREAD (6) EACH SIDE ON A
9.00 DIA. BOLT CIRCLE 5.00 9.50
.515
.500
RETAINING RING
OUTPUT SHAFT TAPERED
BEARING
8.500 (4) 3/4-10 UNC 1.38 6.250
10.25 AS CAST X 1.50 DEEP
11
OHLA® 1250 & 1500
OVERHUNG LOAD ADAPTORS
STANDARD MODELS
Model Output Shaft - Keyway Input Bore - Keyway
BEARING
5.500 1.06 5.000
11.000 7.13
13.00 AS CAST 1.0-8 X 2.00 DEEP (4)
12
There’s a model and size OHLA® SPECIALS
Overhung Load Adaptor for OVERHUNG LOAD ADAPTORS
your need...or we’ll design
one for you. In the U.S. call
TOLL FREE 1-800-533-1731.
( )
16,667 3,762 3
The bearing life calculations shown are to 200 S = 0.603 X +1.406 L10 = RPM S • OHL
be used for radial loading only.
( )
Consult factory if more complex loading 16,667 4,906 3
300 S = 0.606 X +1.485 L10 = RPM S • OHL
(Radial, Axial, Tangential) is present.
( )
16,667 3,762 3
400 S = 0.603 X +1.485 L10 = RPM S • OHL
( )
1,500,000 4,960 3.33
Specials 600 S = 0.714 X +2.086 L10 = RPM S • OHL
( )
Your application may require a modified 1,500,000 4,960 3.33
800 S = 0.448 X +1.704 L10 = RPM S • OHL
shaft or housing to fit an existing
application or to simplify a new design.
( )
1,500,000 7,610 3.33
See “Options” (p 13). 900 S = 0.442 X +1.761 L10 = RPM S • OHL
( )
1,500,000 12,000 3.33
1100 S = 0.179 X +1.285 L10 = RPM S • OHL
( )
1,500,000 71,500 3.33
1250, 1500 S = 0.219 X +1.384 L10 = RPM S • OHL
X – Distance from front end of the OHLA housing to the applied radial load.
VERTICAL APPLICATIONS
For applications where the shaft is
vertical – consult factory for special
bearing and lubrication requirements
14
LUBRICATION
HORIZONTAL APPLICATIONS
RPM 500 1000 1500 2000 2500 3000 3500 4000
200 Series 3800 4400
15
Additional Zero-Max® Motion Control Products
Posi-Lok Bushing® Crown Right Angle Gear Drives Roh’lix® Linear Actuators
Inch and Metric sizes to 35 mm. Nickel plating offers Two and three way models with 1:1 and 2:1 ratios. Spiral Convert rotary motion into precise linear motion. Five
corrosion protection. bevel gears. 3/8 to 1 inch dia. Stainless steel shafts. models with 3/8" to 2" dia. shafts. Thrust ratings to 200
lbs. Overload protection.
WARRANTY
Zero-Max, Inc. the manufacturer, warrants that for a period of 12 months from date of shipment it will repair, or at its option, replace any new apparatus which proves defective in material or workmanship, or which
does not conform to applicable drawings and specifications approved by the manufacturer. All repairs and replacements shall be F.O.B. factory. All claims must be made in writing to the manufacturer.
In no event and under no circumstances shall manufacturer be liable for (a) damages in shipment; (b) failures or damages due to misuse, abuse, improper installation or abnormal conditions of temperature, dirt, water
or corrosives; (c) failures due to operation, intentional or otherwise, above rated capacities, and (d) non-authorized expenses for removal, inspection, transportation, repair or rework. Nor shall manufacturer ever be
liable for consequential and incidental damages, or in any amount greater than the purchase price of the apparatus.
Zero Max, Inc. reserves the right to discontinue models or to change specifications at any time without notice. No discontinuance or change shall create any liability on the part of Zero-Max, Inc. in respect to its
products in the hands of customers or products on order not incorporating such changes even though delivered after any such change.
This warranty is in LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE TERMS
OF THIS WARRANTY CONSTITUTE ALL BUYER’S OR USER’S SOLE AND EXCLUSIVE REMEDY, AND ARE IN LIEU OF ANY RIGHT TO RECOVER FOR NEGLIGENCE, BREACH OF WARRANTY, STRICT TORT LIABILITY OR UPON
ANY OTHER THEORY. Any legal proceedings arising out of the sale or use of this apparatus must be commenced within 18 months of the date of purchase.
CAUTION: Rotating equipment must be guarded. Also refer to OSHA specifications and recommendations.
Zero-Max®, CD®, ETP®, ServoClass®, Torq-Tender®, Control-Flex®, Posi-Lok®, Roh’Lix® and OHLA® are registered trademarks of Zero-Max, Inc. Rev 2.0