Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
This document contains product information for the Nemo Outdoor software.
Content:
Technical support
Version history for User Interface
Version history for Nemo Cloud
Version history for Measurement Server
Version history for Nemo Media Router
Version history for EADS TETRA
Version history for Qualcomm chipset based mobiles
Version history for Samsung chipset based mobiles
Version history for Nokia chipset based mobiles
Version history for HiSilicon
Version history for HiSilicon Kirin
Version history for HiSilicon Balong 5000
Version history for Neul
Version history for Application Tester
Version history for PCTel MX
Version history for PCTel EXflex
Version history for PCTel MXflex
Version history for PCTel IBflex
Version history for PCTel IBflexLite
Version history for PCTel HBflex
Version history for Rohde&Schwarz TSML-G
Version history for Rohde&Schwarz TSML-W
Version history for Rohde&Schwarz TSML-GW
Version history for Rohde&Schwarz TSML-C
Version history for Rohde&Schwarz TSMQ
Version history for Rohde&Schwarz TSMW
Version history for Rohde&Schwarz TSME
Version history for Rohde&Schwarz TSME6
Version history for Nemo Scanner
Version history for Venture MRX
Version history for Venture W1314
Version history for Keysight FieldFox
Version history for GPS devices
Version history for Decoders
Technical support
If you have questions about or beyond this documentation about Nemo Outdoor, please consult User Club pages at
http://www.keysight.com/find/nemo or contact Nemo Technical Support . Note that for full support you need a valid Technical Support and
Software Maintenance Agreement with Keysight Technologies Finland Ltd.
TS Middle East
TS France
TS APAC
TS China
nemo.support@keysight.com
Internet
http://www.keysight.com/find/nemo
Added support for adding markers during playback and deleting marker location."
Added support for adding textual notes during playback.
Added support for direction and subchannel for LTE/NR RACH messages.
Added support for average throughput (PDCP/RLC/Mac/Physical) statistics for NR.
Added support for loading DLF log files in playback and decoding the qualcomm trace messages in Trace grid window.
Added undo functionality to Script editor.
Added support for using marker coordinates when exporting multiple measurements.
Added support for NR gNB ID in the BTS file.
Added support for drawing BTS line(s) to NR SPCell(s).
Added support for disabling device HW reset capability with Nemo Invex II UIC.
Added support for compressed (.zip) NATA update packages.
Added support for NIDI firmware OTA downloads.
Added partial support for Chinese language.
Added support for quick/shortcut buttons.
Added support for network interface selection with Invex.
Added new sampling grid data view.
Added "Protocol System" column for RRC signalling messages to Event Grids.
Added unit selection option to Gauge Graphs.
Added support for parameter type attribute in Nemo Cloud rep-files.
Added support for Nemo Cloud configuration support for LTE-LAA.
Added validation for user input (Nemo Cloud endpoint address).
Added support for reporting IoT KPIs to Nemo Cloud.
Added support for reporting Scanner KPIs to Nemo Cloud.
Added initial support for real-time Nemo Cloud communication.
Added support for L3 and RRC signaling events export to event grids.
Added support for NIDI bluetooth interface.
Added support for Voice call testing with non-rooted NATA.
Added support for new Notifications grid type.
Added support for showing Notifications in event grid.
Added system postfix to NR parameters in the UI.
Added support for NR parameters in Cloud Reporting.
Added support for adding, modifying, and deleting Indoor markers.
Added support for Nth best filter.
Added support for Nth best filter in map and indoor windows.
Added support for filtering Cell Measurement parameters in the UI using measurement type (SSB / CSI-RS).
Added LTE CCE aggegation level system (user) parameter.
Improved File Transfer Status view to make it more compact and easier to use.
Changed measurement export in playback mode so that user is now able to export opened measurmenet without manually closing it
first.
Changed Nemo Navigation Assistant route preview map to Google map / OpenStreetMap.
Changed 'Stop Data Transfer' script commands so that Nemo Outdoor shows 'Failure' status for script command if DCOMP returns a
failed status.
Changed the Invex file transfer implementation to use Outdoor File Transfer Service.
Changed 'Compress measurement file(s)' option in 'Measurement Report' dialog to affect only current measurement.
Changed NR Cell Measurement parameters in the parameter tree (SpCell, SCell, Serving Cells, Serving Beam, Neighbors).
Changed graph axis settings from 32-bit to 64-bit values.
Fixed a bug with 'Hide route on invalid value' feature in indoor window.
Fixed a update bug in Device status window after server connection was lost.
Fixed a bug where script cannot be started when using customer notification in script command.
Fixed a bug which occurred in Set Bandlock script commands after GSM system internal definition was changed.
Fixed a bug where Outdoor would occasionally freeze while closing the application.
Fixed a bug where Outdoor would occasionally crash when losing connection to Nemo Invex II.
Fixed a bug where Outdoor crashed while starting sequencer while using Nemo Invex II.
Fixed a bug where invalid pilot LTE scanning settings from cloud makes OD to scan TDD instead of FDD
Fixed an Outdoor Playback performance issue.
Added support for Cell name (SCell) and SCell BTS lines.
Added support for multi parameter filter.
Added support for custom route history coloring in map window.
Added support for LinkedIn statistics parameters.
Added support for exporting/importing E2E call sequencer settings.
Added support for E2E server connection test with Ping.
Added support for new script option that will make Nemo Outdoor wait ongoing operations before the measurement is stopped.
Added partial support for Japanese language.
Fixed graph window crash when Japanese locale was in use.
Fixed some parameter types missing from list of exportable parameters.
Fixed packet grid timestamps to match measurement file timestamps.
Fixed line colors for some NR parameters in line graphs.
Added support for drawing 5G NR BTS neighbor lines in Map and Indoor windows.
Added support for 5G NR beam width and beam height in the BTS file.
Added support for showing measurement areas in map window.
Added support for new Nemo Cloud license options (automatic + workorder).
Added support for Nemo Intelligent Device Interface (NIDI) devices.
Added support for mScore protocol.
Added support for VQ testing for BiP, Viber, and WhatsApp protocols.
New secure measurement file format (.nmfs extension).
Fixed a bug that caused measurement rename failure if path contained dots.
Fixed a bug with Next Waypoint functionality in route plans in MapXtreme map and indoor windows.
Fixed a bug where graphs were sometimes drawn incorrectly with Windows 7.
Fixed a bug which caused debuglog to fill in a short pediod of time.
Fixed a bug which caused remote measurement files not to be uploaded to Nemo Cloud.
Fixed a bug which caused measurement compression to fail with Nemo Invex II
Fixed a device name encoding bug with Nemo Cloud.
Fixed a bug which caused GPS fix lost and GPS fix acquired events not to be written in Nemo Cloud report file.
Fixed a bug which caused Nemo Invex II measurement results not being uploaded to Nemo Cloud.
Fixed a bug which caused PCAP files not being uploaded to FTP server.
Fixed a bug which caused packet context deactivation in the end of the measurement.
Fixed a crash bug caused by very long parameter (65536) in measurement event.
Improved file transfer implementation with Nemo Invex II.
Improved device status window.
Added new configuration window for iPerf protocol.
Changed Nemo Cloud reporting so that reports are sent also when measuring is paused by user.
Fixed a bug with Open Street Map tile loading over proxy.
Fixed a bug where graphs were sometimes drawn incorrectly with Windows 7
Fixed a bug where Nemo Outdoor UI would sometimes freeze while measuring with Nemo Invex II.
Changed E2E call sequence to no longer requiring successful ping to server before start.
UI does not override APN when it is read from device after start-up.
Fixed a bug where APN is not configured to device if packet session is connected automatically.
Fixed a bug that corrupted Nemo Outdoor configuration files.
Fixed Dedicated packet bearer allocation success rate statistics parameter which was calculated based on default values, not dedicated
values.
Fixed a crash caused by RSRP filter modification in map window.
Fixed a bug where uploading results to Nemo Xynergy failed when given file name (zip) contained the '.' character.
Fixed a bug where events were not processed while the End Measurement dialog was open.
Fixed a bug which caused some data views to have no device assigned when a compatible device was available.
Added support for saving measurement profiles directly from the configuration view.
Added support for MapXtreme 9.0 in map and indoor windows.
Added support for notifying Nemo Xynergy after each floor has been measured and files uploaded (in Inbuilding mode).
Added support for quick keys for changing view group tabs.
Added support for backing up and restoring Nemo Outdoor configuration files.
Added an option to show/hide command bar in graph windows.
Added mScore parameter support.
Added a warning indicator for phones with an incompatible NATA version.
Added ETSI IMS call duration statistic parameter.
Added BTS file support for 5G NR.
Added visual indicator for debug mode.
Added support for Nemo Outdoor, NATA, and Nemo Invex over-the-air updates.
Added support for File Transfer Manager and background (i.e. asynchronous) file transfers.
Disabled 'Delay from reply to request' option from Ping dialog in case of NATA device.
Improved default bandwidth value selection logic for spectrum scanning.
Added support for terminating unwanted silent CSFB redial calls in E2E testing.
Added support for VPN tunnel interface address configuration for IPerf NATA devices.
Fixed a bug where user was able to display previously saved passwords.
Fixed a bug where failing Nemo Server connection check could freeze the Nemo Outdoor UI for a few seconds.
Fixed a bug where call sequences were not always aborted properly.
Fixed a crash caused by route history search.
Fixed a bug that caused delay while stopping measurement with Nemo Invex II.
Fixed a problem with allowed phone numbers when loading it from hardware configuration.
Added support for displaying parameter unit in grid Filter configuration dialog.
Added support for user definable spectrum scan frequency units (Hz, kHz, MHz and GHz).
Added support for hiding current position icon in map and indoor windows.
Added support for copying measurement profiles.
Added support for showing platform in social media script commands.
Added E2E server information to the measurement file header.
Added support for Time Synchronization Point in script wait command.
Fixed a bug with mouse wheel zooming in MapXtreme map and indoor windows.
Disabled maintenance when Work Order session is activated.
Disabled changing script and accessing script editor while Work Order session is activated.
Fixed a bug in filter configuration in map and indoor windows.
Fixed memory leak in HASP feature checks.
Fixed multi-playback loading cancelation bug which caused Nemo Outdoor to crash.
Fixed wrong timestamps in .csv files when measurement was exported with Export interval set to other than All.
Updated notification icons.
Changed Send Custom AT command dialog from modal to modeless.
Added support for color coded Nemo Navigation Assistant connection status.
Added support for RAAS xynergy endpoint in Remote mode.
Added validity check for the dowloaded measurement files from the Invex UIC.
Fixed a bug that caused measurements uploading to Xynergy fails occasionally in Remote mode.
Fixed a bug that caused project id missing in measurement file header params in Remote mode.
Fixed a bug that caused Dropbox configuration dialog remote file field does not accept slash (/) character.
Fixed a bug that caused automatic remote session fails to continue when its execution is interrupted.
Fixed a bug that caused same BTS file multiple adding into measurement result file (zip) in Remote mode.
Fixed a bug that caused indoor maps was not added into measurement result file (zip) in Remote mode.
Added support for displaying Nemo Invex II UIC USB port power consumption information in Nemo Invex Configuration window.
Added support for Offline mode in OpenStreetMap window.
Added support for opening Walker Air measurements in Nemo Outdoor as single measurement.
Added support for ensuring that measurement file path exists before starting measurement.
Added support for exporting measurement using customized column headers.
Added support for generating KPI reference documentation.
Added support for VQ call duration using MOS sample count (for Voice, Video, Kodiak, QChat and Receive call).
Added support for scanner re-configuration during Pause.
Added support for carrier aggregation forcing.
Added notification for user if all five E2E connection attempts fail.
Added notification for E2E Nemo Call server when measurement is stopped.
Added measurement option for preventing script starting if connection to E2E Nemo Server does not exist.
Added possibility to omit measurement file names from measurement CSV export.
Added maximum call duration for MT calls in E2E testing.
Fixed a bug in LTE and UMTS sector lock.
Fixed a bug where profile selecting overrided VQ settings in Voice, Video, Kodiak, QChat and Receive calls.
Fixed a bug that caused incorrect drawing of Configuration Manager treeview items.
Fixed a bug which caused the pilots/channels/frequencies selected into filter and not available after measurement or device's
configuration was changed not to able to be removed from the filter.
Fixed a bug where graphs were not updated when parameter's presentation mode was changed (metric vs. imperial).
Fixed time based measurement export if other export interval than All was selected.
Improved bar graph value labels.
Fixed graph's layer view item drawing after drag and drop.
Fixed a bug which caused MapInfo tab export from map and indoor windows to fail with certain parameters.
Fixed a problem with multithreaded FTP where a transfer time-out of a single thread caused entire transfer to time out.
Fixed a problem with FTP transfer freezing on Windows 7 machines.
Fixed a bug which caused PEVQ-S setup success parameter to be incremented more than once per data transfer context.
Fixed a bug that caused Nemo Outdoor to freeze when a BTS file was connected to multiple devices.
Fixed a bug which caused MeasurementNameTemplate export failing.
Fixed a bug which caused the loss of statistics information on the Report dialog.
Changed measurement export to use a separate filter for each column instead of one global filter.
Changed device configuration in measurement mode to be saved before and restored after measurement export.
Changed Select Parameters dialog's parameter filtering to use regex algorithm already used on Parameters view.
Changed RF validator warnings to display channel's system instead of generic system mask.
Fixed a bug where NATA suffix was added after user defined device label for NATA device.
Removed restriction to use other maps when Google Maps is in use.
Added support for increased LTE channel number range in BTS files.
Added support for MapXtreme map component.
Added support for opening measurement archives with drag and drop.
Added support for creating route points for no fix gps events during route modification.
Added support for exporting measurement date information.
Added support for network interface selection for Nemo Server E2E request.
Added support for displaying device connection status in playback mode.
Added support for displaying remote session name in session view.
Added support for displaying NATA information next to device name.
Added support for new gauge graph type.
Added support for LTE channel bandwidth information in band scan results.
Added support for cell information and received signal power parameters in band scan results.
Added support for Qualcomm NV item read and write.
Added support for cell filtering for scanner parameters in line and bar graphs.
Added support for data filtering indicator with graph view layers.
Device forcing status information is now based on LOCK events.
Increased e-mail message text limit to 1MB.
Removed support for PVI video quality measurement.
Removed support for WAP testing.
Removed support for PC/based VoIP calls.
Removed support for old Analyze Commander.
Improved event parser error logging.
Fixed a bug that caused outdoor to crash when a parameter is opened from parameter tree into Google map.
Fixed a bug that caused the statusbar text in map and indoor windows to be drawn with a wrong color.
Fixed a bug that caused address search failure in map and indoor windows.
Fixed a bug that caused indoor window to leak memory during the measurement.
Fixed a bug that caused incorrect settings to be saved when closing application in full screen mode.
Fixed a problem in drawing status bar text in map and indoor windows.
Fixed a bug that caused measurement uploading to Xynergy fail on Remote mode.
Fixed event grid filtering to work with Event ID parameter.
Fixed call duration parameters calculation when CAC2 or CAC3 is not received before CAD.
Fixed custom grid window title to use the correct format.
Fixed a bug which prevented table grid showing values after one of multiple devices was removed.
Fixed a bug which prevented adding channels by frequency in Channel Selection dialog.
Removed support for Get User Feed, Get Popular Feed and Search Media With a Tag Instagram commands.
Added support for Google Maps online maps in the Map window.
Added support for exporting/importing Nemo Server settings.
Added support for measurement data parser error message logging.
Fixed a problem in updating automatic color legend(s) during measurement in indoor window.
Fixed a problem in missing neighbor detection hardware configuration check.
Improved support for cell identification parameters for scanner measurements.
Fixed "Open custom window" dialog's "Rename" function logic.
Fixed a bug that sometimes caused Outdoor to crash when BTS files were loaded.
Fixed the discovering of Nemo Invex I UICs in Nemo Invex Status View.
Fixed CSFB and LTE call accessibility statistics calculations while originating calls in LTE TDD system.
Fixed a bug in Nemo Xynergy uploading.
Added support for showing UIC - HIM connection in Nemo Invex status view.
Added support for saving coordinate system in to marker file.
Added support for marker coordinate conversion option with iBwave floorplans in indoor window.
Added support for displaying zones in iBwave floorplans in indoor window.
Added support for iBwave floorplan identifier as a measurement filename parameter.
Added support for UTM coordinates with iBwave files in indoor window.
Added support for UIC USB port reset operation in Nemo Invex status view.
Added support for DAS Anomaly analysis in indoor window.
Added support for DAS and Small Cell cell types in map and indoor windows.
Added support for Dropbox statistics.
Added support for uploading measurements to Nemo Xynergy.
Added support for copying parameter descriptions to clipboard in the parameter tree.
Added support for displaying Nemo Invex information in Start Devices dialog.
Added support for Nemo Invex reset commands in Start Devices dialog.
Added support for time synchronization with Nemo Server for E2E voice call testing.
Added support for cell type BTS parameter.
Added support for user-configurable data transfer units in data transfer configuration dialogs.
Added support for the option to include packet capture logs in measurement file upload.
Added support for Excel export function.
Added support for CSFB call setup time statistics.
Added support for new CDMA and EVDO statistics (RSCP and Ec/I0 active set, RX Power measurement
average/minimum/maximum).
Added support for RF Ingress analysis calculation.
Added support for LTE and UMTS RRC connection statistics.
Added support for remote UI connection with NATA.
Added support for IMS SMS statistics.
Changed floorplan information parameters logged to measurement file header in Indoor mode.
Improved device autodetection for Nemo Invex configuration.
Improved device not responding message for Nemo Invex.
Changed script Wait command to use milliseconds instead of seconds.
Changed measurement archive format.
Changed minimum value of ping protocol timeout to 0 ms.
Removed a prompt to add a newly added device for Parameter Grids.
Changed display precision of decimal values for some parameters.
Changed calls received statistics values calculation from CAA event to CAC1 event.
Changed PESQ and POLQA audio quality average statistics to have separate values.
Improved device mode configuration in autodetection dialog.
Parameter grid now shows units for parameter values.
Added support for browser window hiding with Browsing and PEVQ-S protocols.
Fixed a bug with showing cell name next to a cell in map and indoor windows.
Fixed a bug that caused incorrect zooming in indoor window when using Entire route option.
Fixed a bug in BTS cell selection with multiple BTS files in map window.
Fixed Restart UIC command in Nemo Invex Status view on Nemo Invex I UICs.
Fixed a bug in acquiring values for automatic color sets for BTS files in map window.
Fixed a bug that kept indoor window status bar empty.
Fixed a bug in updating Nemo Invex Info Model field.
Fixed a bug in updating BTS serving cell color in indoor window.
Fixed a bug in E2E calls between local devices.
Fixed a bug where Nemo Invex servers could not always be detected.
Fixed a bug with network operator name update.
Fixed a bug that caused VoLTE Intra LTE handover statistics and VoLTE SRVCC handover statistics not to be calculated.
Fixed a bug that caused a device to be added to a Parameter Grid when the device's label was changed.
Fixed a bug that caused MMS statistics not to be calculated.
Fixed a bug that caused some time difference-based parameters to have invalid values.
Fixed a problem that sometimes caused Nemo Invex UICs not to be detected when control PC had multiple network adapters.
Fixed a bug which caused new parameter grid not to use default color sets until parameter values were updated.
Fixed a bug which caused packet grid decoder window's "Go to message" button to always select the first packet row instead of the
decoded packet row.
Fixed a bug which caused remote reports to be uploaded in wrong directory on SFTP server.
Added support for showing VoLTE video call in device status window.
Fixed a bug that caused VoLTE Intra LTE handover statistics and VoLTE SRVCC handover statistics not to be calculated.
Added support for channel filtering EVDO DRC index parameter in map window.
Added support for end-to-end call voice call synchronization between two devices.
Added support for saving projection in map custom windows.
Added support for drawing neighbor cell lines to N strongest cells only in map and indoor windows.
Added support for saving hardware configuration and workspace with a single file menu command.
Added support for measurement archive format.
Added support for georegistering Indoor floorplans with a visual tool.
Added support for disabling PIN code request.
Added support for automatic measurement pausing based on GPS velocity.
Added support for manual RF port configuration with R&S TSMW.
Added support for triggering notifications when the rule has matched N times.
Added support for script status window updating in playback mode.
Added support for renaming debug log file.
Added support for concurrent device loading.
Added support for adjustable column widths in script status window.
Added support for device specific "Force detach when entering idle mode" setting.
Added support for RNC ID/Cell ID presentation format for LTE cell identification parameter.
Added main menu command for opening Windows Network and Sharing Center.
Added new statistics parameter for displaying unique CDMA and EVDO channel numbers.
Added new inter-system cell reselection statistics: LTE/LTE, UMTS/LTE, LTE/UMTS, GSM/LTE, and LTE/GSM.
Added new color grid graph data view.
Added support for manual network selection.
Added channel filtering for LTE scanning parameters (LTE OFDMSCAN event) in graphs.
Added support for sequence number and report type in remote reports.
Added support for logging measurement file names in the CSV output file with measurement export function.
Added support for automatic remote report sending.
Added support for downloading nVidia GLP logs from remote measurement servers.
Added support for manual remote measurement sessions.
Added support for sending measurement data in remote status raports.
Added support for measurements statistics sending during remote measurement session.
Added support for new XML-based script format.
Added support for randomized call duration with scripts.
Added support for randomized wait duration in scripts.
Improved BTS cell drawing.
Fixed a bug that allowed invalid characters to be exported to KML files.
Fixed a bug that caused route(s) to be drawn to incorrect location in map window if projection was changed.
Fixed a bug that caused next waypoint to instantly skip all the way to the end of route in indoor window.
Fixed a bug that caused map window to always open the "World Countries" layer when loaded from a workspace file.
Fixed a bug that caused Indoor to always export data to MapInfo in WGS84 projection.
Fixed a bug that sometimes caused unexpected measurement list stopping.
Fixed a bug that caused occasional crashing of Nemo Outdoor when a user clicked start/stop script button.
Fixed a bug that caused the changing of FTP File dialog options to fail.
Fixed a bug that caused the removing of all rules in Export Measurements dialog to fail.
Fixed a bug that made it impossible to use own FTP settings with remote.
Fixed a bug that caused the copying of Script Editor timer and counter items to fail.
Fixed a bug that caused Script Editor item selection to fail in copy and paste operation.
Fixed a problem that caused application to crash occasionally during measurement list execution.
Fixed a problem that caused application to crash occasionally during script execution under large CPU load.
Fixed a problem that caused the starting of scanning at the beginning of measurement to fail occasionally.
Improved timeout management for Radio On/Off operations.
Fixed a problem that caused application to crash when using Packet Grid window.
Fixed a bug that caused Copy and Paste buttons to be misplaced when resizing Script Editor dialog.
Fixed a bug which may have caused a problem in script restarting after starting had failed.
Fixed a problem that caused some packet session settings to be incorrectly applied.
Fixed a bug that caused a crash when loading a measurement if automatic color set was used in map window.
Fixed an error which caused zoom rectangle not being shown in scatter graph.
Version 7.2.0 (24.10.2013)
Fixed a bug where device state is erroneously shown as "Terminal radio off" sometimes.
Fixed a problem that caused panning with mouse to work incorrectly in OpenStreetMap map window.
Fixed Filename Editor crashing bug when tag '%n' or '%N' was used.
Fixed a problem with UMTS soft handover notifications.
Changed notifications and statistics to count aborted data transfers as successful transfers.
Fixed a problem that occasionally caused Nemo Invex measurement file transfers to fail.
Fixed a problem that caused Nemo Invex measurement file transfer progress to update incorrectly.
Fixed a problem with the Indoor window that caused previous version workspace file loading to fail.
Fixed a problem that caused the raster map opening to fail under certain conditions.
Fixed a problem that caused the application installer to start repairing the application after Nemo Analyze was installed.
Fixed incorrect voice quality echo license verification with Nemo Invex.
Fixed device configuration loading problem when device count exceeds license count.
Added support for cell information decoding scanning option for UMTS system.
Added support for HTTP upload.
Fixed a problem that caused interference analysis to work incorrectly when multiple bands were scanned simultanaously.
Fixed a problem that caused some supported systems to be disabled occasionally with multi-system scanners.
Fixed a problem that NIDI devices were not detected on some computers.
Fixed a problem that caused Nemo Invex II measurement server to freeze when exiting.
Fixed a bug where measurement file writing error was not reported to user interface.
Fixed a problem that caused the Measurement Server to crash when preparing to transfer a very large number of files.
Fixed a bug where HIM devices were occasionally paired to an incorrect COM port.
Added support for restarting unresponsive Nemo Invex UICs via Nemo Invex UIC in slot 0.
Fixed a problem where servers without active devices stopped updating server status information after measurement was stopped.
Added support for logging Nemo Invex hardware alerts to the measurement file.
Added support for Nemo VQ Module without Nemo Invex hardware.
Changed Measurement Server startup to wait until handset isolation modules have been started before clients are allowed to connect.
Added support for starting Nemo Invex handset isolation modules after measurement server was started.
Fixed a problem that caused the Measurement Server to crash with very large measurement events.
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed a problem where UMTS call re-establishment was not considered successful when re-establishment succeeded for PS domain
radio bearer release. (CARE)
Added support for band information during handover and cell reselection (HOA, CREL).
Fixed a problem that caused voice call to be incorrectly terminated if caller procedure codes were used in the phone number.
Changed voice call handling to accept calls with caller procedure code.
Fixed a problem that CAD measurement event with status value 3 (=dropped out of service) was never written.
Fixed a problem that caused incorrect band values to written to the measurement file.
Fixed a problem with a call answering.
Fixed bug where Twitter protocol was unusable by enabling TLS1.2 support.
Fixed a problem to activate voice calls with Samsung-based devices.
Fixed a problem with incorrect NR MAC retransmission rate. (MACRATEU)
Fixed a problem that sometimes caused connection to NATA to be lost when data transfer was stopped.
Added support for UDP Echo protocol.
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed a problem where UMTS call re-establishment was not considered successful when re-establishment succeeded for PS domain
radio bearer release. (CARE)
Improved service state reporting with the latest Qualcomm devices. (SEI)
Fixed a memory leak when the mobile phone uses carrier aggregation without carrier aggregation license.
Fixed a problem where a new Apple iPhone device could not be added to Nemo Outdoor.
Fixed a problem with missing SCell parameters with some older devices.
Fixed a problem that caused in some rare devices UMTS AMR rates to be missing. (AMRS)
Fixed a problem with Qualcomm where SIP server was incorrectly deregistered and then re-registered when NATA was used.
(SIPREGD)
Fixed a problem where link adaptation reporting was not handled correctly with non-continuous LTE uplink resource allocation.
(PLAIU)
Fixed a problem where LTE MasterInformationBlock RRC signaling message was sometimes corrupted. (RRCSM)
Fixed a problem that sometimes caused missing SIP messages. (SIPSM)
Fixed a problem that caused Q.850 cause code 16 in SIP BYE message to be incorrectly logged as internal server error. (CAD)
Fixed a bug which caused Nemo Outdoor to crash while using PEVQ-S or browsing protocol.
Fixed a problem with FTP transfer not disconnecting on socket error.
Fixed incorrect routing area update timeout handling. (RUA, RUF, RUS)
Fixed a problem with random high RTP jitter with certain measurement configurations. (RTPJITTER)
Fixed a problem with missing LTE MasterInformationBlock. (RRCSM)
Added support for Qualcomm based device battery status, level, and temperature information with NATA. (DEVI)
Added support for GSM WFS (AMR wideband) channel. (CHI, AMRS)
Fixed CDMA trace activation problem with some CDMA devices.
Fixed a problem with incorrect UMTS RLC BLER reporting before a dropped call. (RLCBLER)
Fixed a problem with channel locking with some devices. (LOCK)
Fixed a problem that LTE SCells were not reported with category 1-5 devices without category 6 license.
Removed delay requirement between SIP registration and VoLTE call.
Version 7.5.0 (25.2.2015)
Added support for IP Access Time and IP Termination Time parameters for HTTP Browsing protocol.
Changed Facebook to use Graph API 2.1.
Fixed a problem that sometimes caused PLMN lock status to be updated incorrectly to PLMN Deregistered during measurement.
Fixed a problem that caused LTE bands to be missing from band lock with Huawei and certain Samsung models.
Fixed a problem that caused LTE SNR not to be reported always for secondary serving cell. (CI)
Fixed a problem that caused UMTS measurement results to be missing during LTE idle mode. (CELLMEAS)
Fixed a crash with Browsing Protocol.
Fixed a bug that caused Packet Decoder to ignore some additional headers with Nemo Handy packet capture files.
Fixed a bug that caused an extra error with FTP file/directory listing.
Fixed a problem where VoLTE call was terminated after SRVCC handover when BYE SIP signaling message was received.
Fixed a problem where FTP upload did not work with NATA when local file was selected for uploading.
Fixed a problem where the UMTS inter-frequency channel number was sometimes n/a. (CELLMEAS)
Fixed a problem that sometimes cell measurements were missing for LTE secondary serving cell. (CELLMEAS)
Added support for new trace interface 2 voice call activation method.
Fixed a problem that caused hardware reset after detach.
Fixed a problem that caused a voice quality synching issue by adding a 2s delay before the calling end starts the voice quality
measurement.
Fixed a problem that caused TXPC event to be missing in EVDO.
Fixed a problem that caused incorrect coordinate decoding from signaling in Chinese OS.
Added support for handover duration parameter with LTE intra handovers.
Fixed a problem with corrupted timestamps with some Qualcomm-based devices.
Fixed a problem that caused duplicate CELLMEAS events to be created in CDMA system.
Added support for disabling local file writing with FTP and HTTP protocols.
Improved timestamp accuracy.
Changed Ping and Traceroute protocols to fail when connecting if DNS Query did not complete successfully.
Changed DNS Query to include cached results.
Fixed a crashing problem that occurred when modem port was not selected and <Automatic> or <NDIS> was selected as a packet
entry.
Fixed missing HANDOVER_TO_UTRAN_COMMAND RRC signaling message.
Fixed a problem with incorrect MNC and MCC values during GSM.
Fixed a problem that caused the Incremental Redundancy Status Uplink parameter with GPRS to be reported incorrectly.
Fixed a problem where GSM C1 and C2 parameters were sometimes incorrectly -100 instead of n/a (CELLMEAS).
Added support for NDIS interface with Novatel based USB modems.
Added support for the latest cell measurement trace messages (caused missing Ec/N0 etc. with the latest Qualcom based devices).
Added support for common packet capture frame decoder.
Added support for Windows Vista TCP autotuning.
Added support for registry TCP window size for all protocols.
Added support for HTTP redirects with WAP 2.0
Added SMS support for Huawei C7600.
Changed IP*Works library from version 6 to 8.
Changed passive mode to default option in FTP protocol.
Service unavailable not reported any more just after voice call is released.
Fixed a problem that the QoS downlink bitrate values above 8600 kbps were incorrect in QSPN event.
Fixed a problem that HSPA packet technology was sometimes reported as HSUPA.
Fixed a problem with incorrect port number in DAA event with Ping testing.
Fixed a problem that the reported GPRS radio priority was one too high.
Fixed a problem that three digit MNC values was not recorded correctly.
Fixed a problem with missing RSCP and RSSI values with MSM 8200 Qualcomm chipsets.
Fixed a problem that sometimes incorrect attaches were recorded in non-service state.
Fixed a problem that the system lock was not working correctly with some models of the Sierra Wireless.
Fixed a problem that with the NDIS interface the Packet Deactivation is always recorded as a Mobile Reject instead of Normal
Deactivation with Sierra Wireless USB modems.
Fixed a problem that with Sierra Wireless USB modems the application layer throughput was maximum of 3 Mbit/s with the Windows
Vista when the NDIS interface activation was done using the Nemo Outdoor.
Improved inter-frequency cell measurement handling.
Fixed a problem that the added and removed scrambling codes were always 0 in SHO event when Release 7 RRC signalling was used.
Fixed a problem that HOS measurement event is written incorrectly when HANDOVER FAILURE signaling message is received after
HANDOVER COMPLETE signaling message.
DRC index value miscalculation for Rev A fixed.
Fixed a problem that caused the application to crash occasionally during multi data testing.
Fixed a problem that caused the TCP receive window size to be incorrectly set for all data transfer protocols except FTP.
Fixed a problem that caused voice call to be incorrectly terminated if caller procedure codes were used in the phone number.
Added support for 64QAM with HSPA+ with Qualcomm 8200 chipset.
Added support for packet and error counts with Streaming and UDP IPerf protocols (PER).
Support for Trace route testing.
Microsoft Network Monitor updated to 3.3.
Changed voice call handling to accept calls with caller procedure code.
Fixed a problem that created PDP context was occationally dropped immediatelly.
Fixed a problem with UMTS channels 687, 1087 and 2087.
Fixed bug where Twitter protocol was unusable by enabling TLS1.2 support.
Added support for simultaneous multi-system and LTE/UMTS band locking with ICD 5.11 or newer.
Fixed a problem that sometimes caused connection to NATA to be lost when data transfer was stopped.
Added support for UDP Echo protocol.
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed a problem where UE with diagnostics version 5.11 or newer could not be locked on LTE TDD band.
Fixed incorrect routing area update timeout handling. (RUA, RUF, RUS)
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed a problem where UMTS call re-establishment was not considered successful when re-establishment succeeded for PS domain
radio bearer release. (CARE)
Fixed incorrect routing area update timeout handling. (RUA, RUF, RUS)
Improved voice quality synchronization algorithm used with Invex handset isolation modules.
Fixed a problem where lock to multiple bands was indicated when all bands were enabled with C7-00.1 (RM-691) due to incorrect
UMTS 1900 band support.
Added support for serving cell BCCH channel measurement results. (CELLMEAS)
Fixed a problem that caused the call attempt to fail if UE received RRC message addressed to another terminal.
Fixed a crashing problem that occurred when modem port was not selected and <Automatic> or <NDIS> was selected as a packet
entry.
Added support for band information during handover and cell reselection (HOA, CREL).
Fixed a problem where GSM1800 band was sometimes reported incorrectly as GSM1900 band in GSM850/1800 network.
Fixed a problem where RRLP signalling messages were missing when sent in CS mode.
Fixed a problem where channel number was sometimes missing from L3SM and RRCSM events before changing to another WCDMA
band.
Fixed a problem that caused voice call to be incorrectly terminated if caller procedure codes were used in the phone number.
Fixed bug where Twitter protocol was unusable by enabling TLS1.2 support.
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed a problem where UMTS call re-establishment was not considered successful when re-establishment succeeded for PS domain
radio bearer release. (CARE)
Fixed a problem that sometimes caused missing SIP messages. (SIPSM)
Fixed a problem that caused Q.850 cause code 16 in SIP BYE message to be incorrectly logged as internal server error. (CAD)
Fixed a bug which caused Nemo Outdoor to crash while using PEVQ-S or browsing protocol.
Fixed a problem with FTP transfer not disconnecting on socket error.
Fixed incorrect routing area update timeout handling. (RUA, RUF, RUS)
Added support for IP Access Time and IP Termination Time parameters for HTTP Browsing protocol.
Changed Facebook to use Graph API 2.1.
Fixed a problem that sometimes caused roaming status parameter to frequently switch between N/A and the correct value. (ROAM)
Fixed a problem that caused MAC, RLC, and PDCP throughputs to be incorrect with Balong 720-based devices. (MACRATE,
MACRATEU, RLCRATE, RLCRATEU, PDCPRATED, PDCPRATEU)
Fixed a problem that caused UMTS detected cells not to be logged. (CELLMEAS)
Fixed a problem that caused the percentages of uplink rank N/A and rank 0 subframes to be incorrect in LTE TDD. (PLAIU)
Fixed a problem that caused LTE downlink link adaptation info and PDSCH throughput to be incorrect with Balong 720-based devices
in LTE TDD. (PLAID, PHRATE)
Fixed a problem that caused LTE link adaptation info to be incorrect after a handover from TDD to FDD or FDD to TDD. (PLAID,
PLAIU)
Fixed a problem that caused LTE subframe assignment parameter to be incorrectly logged as 0 instead of N/A in LTE FDD. (CHI)
Fixed a problem that sometimes caused LTE secondary serving cell information not to be logged. (CHI)
Fixed a problem that caused LTE MAC downlink throughput to be incorrectly logged for non-existent secondary serving cells with
Balong 710-based devices. (MACRATE)
Fixed a crash with Browsing Protocol.
Version 7.4.0 (16.9.2014)
Fixed bug where Twitter protocol was unusable by enabling TLS1.2 support.
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed bug where Twitter protocol was unusable by enabling TLS1.2 support.
Fixed bug where Twitter protocol was unusable by enabling TLS1.2 support.
Added support for ignoring and rejecting incoming call actions with NATA.
Fixed a problem where UMTS call re-establishment was not considered successful when re-establishment succeeded for PS domain
radio bearer release. (CARE)
Fixed a bug which caused Nemo Outdoor to crash while using PEVQ-S or browsing protocol.
Fixed a problem with FTP transfer not disconnecting on socket error.
Added support for IP Access Time and IP Termination Time parameters for HTTP Browsing protocol.
Changed Facebook to use Graph API 2.1.
Fixed a crash with Browsing Protocol.
Fixed a bug that caused Packet Decoder to ignore some additional headers with Nemo Handy packet capture files.
Fixed a bug that caused an extra error with FTP file/directory listing.
Fixed a problem that caused DCONTENT parsing crash with Browsing protocol.
Added support for disabling local file writing with FTP and HTTP protocols.
Changed Ping and Traceroute protocols to fail when connecting if DNS Query did not complete successfully.
Changed DNS Query to include cached results.
Fixed a problem with iperf client crashing when the socket hangs.
Fixed VoIP call disconnect event reason line for receiving end.
Fixed SIP registration problem after packet session is restarted.
Fixed response message for SIP keep-alive requests during a VoIP call.
Fixed a problem with HTTP protocol handling ports in URL.
Added support for using application test handler without modem device
Added support for multithread FTP.
Microsoft Network Monitor updated to 3.4.
Fixed a problem with IPerf binding to localhost.
Fixed a problem with stability of Browser Protocol in multi-measurement.
Added support for automatic test file generation for FTP upload.
Added support for receiving MMS Decoding Version from WAP Push messages.
Added support for automatic dial-up generation.
Fixed a problem that occurred sometimes when multiple devices were used with the Windows Vista or Windows 7 and the data
transfer always failed until the PDP context was re-established.
Fixed a problem that caused the application to crash occasionally during multi data testing.
Fixed a problem that caused the TCP receive window size to be incorrectly set for all data transfer protocols except FTP.
Fixed a problem that caused voice call to be incorrectly terminated if caller procedure codes were used in the phone number.
Added support for packet and error counts with Streaming and UDP IPerf protocols (PER).
Support for Trace route testing.
Microsoft Network Monitor updated to 3.3.
Changed voice call handling to accept calls with caller procedure code.
Fixed a problem that created PDP context was occationally dropped immediatelly.
Added support for configuring multiple bandwidths for LTE frequency scanning.
Added support for LTE FDD band 25 with MX, EXflex, and IBflex scanners.
Added support for L3 decoding dwelling time for GSM and UMTS.
Version 7.1.0 (8.7.2013)
Added support for Frequency scan and Enhanced Top N Signal scan in LTE system.
Added support for more detailed Top N Signal scan option configuration.
Added support for configuring multiple bandwidths for LTE frequency scanning.
Added support for CDMA/EVDO band 450 for MXflex, IBflex and EXflex scanners.
Added support for LTE FDD band 25 with MX, EXflex, and IBflex scanners.
Added support for LTE TDD band 44 with EXflex and IBflex scanners.
Added support for LTE FDD and LTE TDD BCCH Layer 3 message decoding.
Added support for UMTS L3 message decoding.
Changed the maximum number of UMTS channels to be scanned in TopN mode to 24.
Added 5G NR support.
Added support for eMBMS SC-PTM Unicast per-cell measurements.
Added support for MIMO 4x4 Rank and Condition number.
Added support for NR Band scan.
Added support for NR Timing offset.
Fixed discrepancy between configured and resulting NR SSB pattern case.
Fixed problem with setting NR frequency range for IBflex, MXflex, and HBflex.
Updated PCTel SeeGullMaster API to version 2.3.2.0.
Fixed a problem that prevented the simultaneous LTE and NB-IoT scanning of the same channel.
Fixed a problem that prevented the availability of the full NB-IoT channel range for pilot scanning.
Added support for LTE FDD band 25 with MX, EXflex, and IBflex scanners.
Added support for LTE TDD band 44 with EXflex and IBflex scanners.
Added support for error notification when missing scanning results are detected.
Added support for logging scanning configuration options in SCANCONFIG event in the measurement file.
Added support for error notification when missing scanning results are detected.
Fixed channel number calculation with UMTS bands with extended channel ranges.
Added support for logging scanning configuration options in SCANCONFIG event in the measurement file.
Added support for error notification when missing scanning results are detected.
Fixed channel number calculation with UMTS bands with extended channel ranges.
Added support for logging scanning configuration options in SCANCONFIG event in the measurement file.
Added support for error notification when missing scanning results are detected.
Added support for logging scanning configuration options in SCANCONFIG event in the measurement file.
Added support for error notification when missing scanning results are detected.
Fixed channel number calculation with UMTS bands with extended channel ranges.
Added support for logging scanning configuration options in SCANCONFIG event in the measurement file.
Added support for UMTS 2100, CDMA2000 800 and EVDO 800 scanning with R&S TSMQ scanner.
First release version with suppor for GSM and spectrum scanning.
Fixed problem where TSMW and TSMW were incapable of decoding LTE Cell ID.
Added support for LTE bands 29 and 30 with TSMW and TSME.
Added support for MIMO mode information with TSMW and TSME.
Added support for LTE band 27 with TSMW and TSME.
Fixed UMTS measurement recording problem with TSMW.
Fixed channel number calculation with UMTS bands with extended channel ranges.
Support for GSM BCCH SCH RX level results with R&S TSMW scanner
Upgrade for R&S Vicom API version 14.50
Fixed a problem that caused LTE scanning to remain incorrectly active when switching between systems.
Fixed problem where TSMW and TSMW were incapable of decoding LTE Cell ID.
Added support for LTE bands 29 and 30 with TSMW and TSME.
Added support for band scanning with TSME.
Added support for MIMO mode information with TSMW and TSME.
Added support for LTE band 27 with TSMW and TSME.
Added support for LTE RSRP and UMTS RSCP parameters for Nemo FSR1 band scanning.
Added support for LTE Bandwidth parameters for Nemo FSR1 band scanning.
Fixed incorrect missing event notifications.
Added support for new CDMA band 10 lower half with Nemo FSR1.
Added support for error notification when missing scanning results are detected.
Added support for automatic LTE bandwidth detection with Nemo FSR1.
Added support for MIMO mode information in the OFDMSCAN event with Nemo FSR1.
Fixed a problem that caused a crash when Nemo Outdoor 7.40 device configuration for Nemo FSR1 was loaded with spectrum scan
settings.
Fixed spectrum gaps with Nemo FSR1 tunable downconverters.
Fixed missing LTE band 28 from Nemo FSR1 low band DC.
Added support for LTE BCCH message decoding with Nemo FSR1.
Added support for LTE cell information decoding with Nemo FSR1.
Added support for LTE bands 22, 31, 42, and 43 with Nemo FSR1.
Added support for CDMA 450MHz band with Nemo FSR1.
Fixed UMTS, CDMA, and EVDO frequency scanning issues with Nemo FSR1 tunable DCs.
Added support for CDMA and EVDO bands 0, 3, 7, 10, 12, 18, and 19 and LTE bands 6 and 18 with new low-band downconverter.
Added support for CDMA and EVDO bands 16 and 21 and LTE bands 9, 23, and 37 with new high-band downconverter.
Added support for E-UTRA bands 29, 30, 34, and 44 with Nemo FSR1.
Added support for Nemo FSR1 down converter information logging to measurement file.
Added support for high dynamic range LTE scanning with Nemo FSR1.
Added support for LTE TOP-N scanning with Nemo FSR1.
Fixed a problem that caused application to crash occasionally when two Nemo FSR1 scanners were connected simultaneously.
Added support for CDMA pilot delay measurements with Nemo FSR1.
Added support for Nemo FSR1 power cycle requirement notification.
Fixed a problem where incorrect channel frequency was calculated with Nemo FSR1 CDMA and EVDO 2100 narrowband frequency
scanning.
Added support for simultaneous narrowband and wideband LTE pilot scanning.
Added support for CDMA and EVDO AWS band.
Added support for aggregated measurement mode with CDMA and EVDO.
Added support for UMTS 1800 band.
Added support for LTE bands 35 and 39.
Fixed a problem that caused Nemo Outdoor to crash with unlicensed downcoverters.
Fixed broken LTE TDD Band scan with FSR1.
Fixed a problem where frequency scanning in 700 and 800 MHz bands failed to start with the new US downconverter.
Fixed a problem where LTE Pilot scanning in 700 Mhz band failed to start with the new US downconverter.
Added support for UMTS BCCH message decoding with Nemo FSR1.
Fixed a problem that prevented LTE bands 12 and 17 scanning with US tri-band downconverter.
Support for LTE TDD uplink/downlink mode configuration with Nemo FSR1
Support for LTE bands 20, 25, 33, 38, 40 and 41 with Nemo FSR1
Support for Nemo FSR1 firmware updating
Fixed a problem that caused the GPS height information to be always zero with Nemo FSR1
Fixed a problem that prevented measurement after a Nemo FSR1 calibration warning
Fixed connection status error message issue after adding FSR1 to Outdoor.
Fixed frequency scanning channel number issue with 10, 30 or 50 kHz Bandwidths.
Added support for error notification when missing scanning results are detected.
Added support for error notification when missing scanning results are detected.
Added support for all FieldFox scanner models with Spectrum Analyzer capability.
Added support for GPS status parameter with NMEA-compatible GPS devices. (GPS)
Fixed a problem that caused automatic connection re-establishment for GPS devices not to work.
Fixed a problem that prevented GPS distance from being reset when starting measurement .
Added support for automatic connection re-establishment for NMEA-compatible GPS devices.
UMTS/LTE RRC: Fixed showing certain LTE/UMTS cell reselection and measurement related parameters also in dBm/dB.
UMTS RRC: Fixed a problem where some large RRC connection setup complete messages could not be decoded.
LTE RRC: Fixed a problem where large RRC messages crashed Nemo Outdoor.
GSM RRLP: Fixed a problem that caused Nemo Outdoor to crash with Measure Position Response message with GPS Assistance
Data IE.
UMTS/LTE RRC: Fixed and improved BIT STRING type parameter decoding.
UMTS/LTE RRC: Added support for showing certain LTE/UMTS cell reselection parameters also in dBm/dB.
GSM/UMTS/LTE L3: Updated decoder to version 11.15.0 (NAS).
GSM/UMTS/LTE L3: Fixed decoding of Traffic Flow Template IE.
LTE RRC: Updated decoder to version 11.12.0.
UMTS RRC: Updated decoder to version 11.14.0.
LTE RRC: Added support for showing RSRP and RSRQ values also in dBm/dB.
Fixed a problem that caused the application to crash when processing certain Layer 3 messages.
UMTS RRC: Fixed a problem where message decoding output was sometimes truncated.
Version 7.2.0 (24.10.2013)
LTE RRC: Added SIB type information to message name with SystemInformation message.
LTE RRC: Added support for decoding SIB information element as a PDU.
GSM/UMTS/LTE L3: Fixed a problem where SMS T-PDU address type elements with alphanumeric coding were decoded incorrectly
(NAS).
GSM L3: Fixed a problem that Access Control Class in RACH Control Parameters IE was decoded incorrectly.
UMTS/GSM L3: Fixed a problem that Maximum bitrate UL/DL extended parameters were decoded incorrectly.
UMTS/GSM L3: Fixed a problem that Time Zone value was decoded incorrectly.
UMTS/GSM L3: Fixed a problem that UCS2 encoded Network Name value in Network Name IE was decoded incorrectly.
EVDO SNP: Added support for Enhanced Forward Traffic Channel, Subtype 2 and 3 Reverse Traffic Channel and Multimode
Discovery Protocols.
UMTS RRC: Added decoding of CS/PS domain specific system information in gsm-MAP elements.
GSM RLC/MAC: Added support for segmented downlink control messages.