Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DSEGenset
DSE710/20
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
AUTO START AND AUTO MAINS FAILURE EMC Generic Immunity Standard for
the Industrial Environment
CONTROL MODULES
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
FEATURES ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
The DSE710 is an Automatic Start The module can be controlled from a TEMPERATURE
Control Module suitable for a wide PC that is located up to a maximum BS EN 60068-2-1
o
Ab/Ae Cold Test -30 C
variety of single diesel or gas gen-set distance of 100 meters away. BS EN 60068-2-2
applications. Bb/Be Dry Heat +70 oC
The DSE720 is an Automatic Mains VIBRATION
Monitoring an advanced list of Failure Control Module incorporating BS EN 60068-2-6
engine parameters, the DSE710 all the features of the DSE710 plus Ten sweeps in each of three
major axes
will automatically shut down the the ability to monitor the mains 5 Hz to 8 Hz @ +/-7.5 mm,
engine, or indicate a warning, on (utility) supply, automatically 8 Hz to 500 Hz @ 2 gn
detection of a fault condition, controlling the switch-over to HUMIDITY
indicating the fault on the module’s generator when the mains (utility) BS EN 60068-2-30
front panel LCD display or LED. power fails. Db Damp Heat Cyclic 20/55 oC
@ 95% RH 48 Hours
BS EN 60068-2-78
The module can be easily configured Cab Damp Heat Static 40 oC
@ 93% RH 48 Hours
using the DSE810 interface and PC.
Front panel editing is also available. SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes
15 gn in 11 mS
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
COMPREHENSIVE FEATURE LIST TO SUIT A control panel with the supplied sealing gasket.
1 2 2 2
DSE710/20
7
OTHER
ISSUE 4
®
DSEGenset
DSE710/20
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
OUTPUTS
AUXILIARY
Solid state
2.4 A DC at supply voltage
FUEL/START
DSE710 Solid state
3.4 A DC at supply voltage
GENERATOR C.T.
5 A secondary 0.5 VA
DIMENSIONS
OVERALL
209 mm x 146 mm x 30.3 mm
8.2” x 5.7” x 1.2”
PANEL CUT-OUT
182 mm x 137 mm
7.2” x 5.4”
KEY FEATURES • Tamper-proof engine hours meters) using DSE PC software
• PC/Front panel configuration counter • User-friendly set-up and button MAXIMUM PANEL THICKNESS
8 mm
• Digital and analogue inputs • LED indicators layout 0.3”
• Digital outputs • Configurable timers • Multiple engine parameters are
• Automatic mains (utility) supply • Configurable outputs monitored simultaneously
monitoring (DSE720 only) • Configurable inputs • License-free PC software
• Automatic shutdown or warning • Back-lit character/icon LCD
when fault conditions are display
detected
• Automatic/Manual/Remote start KEY BENEFITS
• Engine pre-heat • Automatic transfer between
• Engine monitoring and protection mains (utility) and generator
features power (DSE720 only)
• Protected Solid State (PSS) • On-site module configuration and
outputs remote configuration (max 100
RELATED MATERIALS
TITLE PART NO’S
DSE710 Installation Instructions 053-013
DSE720 Installation Instructions 053-005
DSE710 Operator Manual 057-066
DSE720 Operator Manual 057-001
DSE700 PC Software Manual 057-002
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-035/01/16 (5) US
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457