Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Phase Match & Slip Sync types of synchronization * Available with extension module.
| InteliMains 210 Datasheet | Related HW ver: 1.0.0 | Related SW ver: 1.0.0 | Date of issue: 31.7.2018
Dimensions, terminals and mounting
Note: The final depth of the controller depends on the selected extension module - it can vary between 41 and
56 mm. Mind also a size of connector and cables (e.g. in case of RS232 connector add about another 60 mm for
standard RS232 connector and cable).
Note: The controller is to be mounted into panel doors as a standalone unit using provided metal holders.
Therequested cut-out size is 187x132 mm. Use the screw holders delivered with the controller to fix the
controllerinto the door.
Resolution 132 x 64 px
Operating conditions
Operating temperature -20˚C to +70˚C
Voltage measurement
3ph-n Mains voltage
Measurement inputs
3ph-n Bus voltage
Accuracy 1%
Current measurement
Measurement inputs 3ph Mains current
Measurement range 5A
Binary inputs
Number 8 non-isolated
Binary outputs
Number 6 non-isolated
Inteli AIN8 8 Analog Input Channels and 1 RPM/Impulse Input Module I-AIN8
Inteli IO8/8 16 Configurable Binary Inputs/Outputs and Analog Outputs Module I-IO8/8
EN 61000-6-2
EN 61000-6-4
EN 61010-1
Manufacturer:
ComAp a.s.
Czech Republic E-mail: info@comap-control.com
Phone: +420 246 012 111 Web: www.comap-control.com
© ComAp. Features and specification are subject to change without prior notice.