Welding Process(es) : Type(s) : PQR No. : JOINTS : (QW-402) Details Joint Design: As per equipment Drawing.
Backing :
Backing Material (Type):
Metal Nonfusing Metal
Nonmetallic Others Retainers not permitted BASE METALS : (QW-403) FILLER METAL : (QW-404) Process P.NO. to P.No. OR F.No. Specification Type & Grade To A.No.
Specification Type & Grade
OR SFA No. Chem. Analysis & Mech. Prop. To AWS(Class) Chem. Analysis & Mech. Prop. Product form (Solid/cored / Flux cored) GTAW / PAW Size of Filler metal (mm) ∅
GROOVE FILLET Electrode Flux ( Class)
Base Metal thk.range (mm.) Trade Name (Flux) Pipe dia Range (mm.) Consumable Insert
Others :. Deposited weld Groove
metal Thk. range Fillet (mm.) Pass Thk. (mm.) Others : QW – 482 WPS No : Rev. : Page 2 of 2 POSITION : (QW-405) POST WELD HEAT TREATMENT : (QW-407) Position(s) of Groove : Temperature Range(°C) : Weld Progression : Time Range(min) : Position(s) of Fillet : * PWHT below the lower transformation temperature. PREHEAT : (QW-406) GAS : (QW-408) Preheat Temp.(Min.)°C : Gas(es) % Comp Flow Rate Mixture (lit/min) Interpass Temp.(Max.)°C : Shielding Argon Preheat Maintenance : Trailing None Backing None ELECTRICAL CHARACTRISTICS : (QW-409) Current : Polarity : Amps(Range) : Volts. : Tungsten Electrode Size and Type : Mode of Metal Transfer for GMAW : Electrode wire feed Speed Range : Pulsing : TECHNIQUE : (QW-410) String or Weave Bead Orifice or Gas Cup Size ∅ (mm) Initial and Interpass Cleaning Method of Back Gouging Oscillation Contact Tube to work distance (mm) Multiple or Single Pass (per side) Multiple or Single Electrode Closed to out chamber Electrode spacing Travel Speed (Range) Peening Others: Weld Filler Metal Current Travel Layer (s) Process Class Dia.mm Type & Amp Voltage Speed Range Remarks (es) Polarity Range Range cm/min