Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UNIDAD 3
ITESI
Índice
Índice 2
Airzone, Smart Climate Control 3
The concept of smart control by Airzone 3
Zoning systems 4
Quality assurance 5
BREEAM 5
LEED 6
Energy consumption optimization 6
Effective control 7
Eco-Adapt algorithm 7
Smart control for the whole installation 7
BMS Integration 7
What is VAF System? 9
Esquema de conexionado 10
Esquema de instalación 11
Detalle de los cálculos 12
LISTADO DE MATERIALES 14
2
Airzone, Smart Climate Control
Airzone is the world leader in HVAC climate control systems. With over 20 years of experience,
it is one of the most prestigious companies in the HVAC industry. Airzone Solutions allow the
user to control different types of technologies with the same interface.
ALL AIRZONE SYSTEMS CAN BE COMBINED INTO THE SAME PROJECT, INTEGRATED
WITH OTHER CONTROL SYSTEMS AND ALSO CONTROLLED REMOTELY.
If you have any questions, please contact us at projects@airzonecontrol.com and our Projects
Department will help you in anything you need.
EASYZONE VAF
Single split
Multi-split
VRF (heat pump)
VRF (heat recovery)
Fancoil (2 pipes)
Underfloor heating
3
Airzone controllers manage the entire installation and favor a more rational use of energy.
We offer numerous possible combinations so that our solutions can be adapted to the needs of
the user and the installation.
An Airzone Integrated Zoning System transforms a traditional ducted HVAC system into a
multizone system, basing its operation on two main factors:
Optimization of the HVAC system energy use, thanks to the dedicated Airzone Communication
Gateways.
Providing the highest thermal comfort range to every zone.
The Airzone Integrated Zoning Systems allow to increase energy savings as well as diminish
first costs. This happens by means of the communications between Inverter units and Airzone
system, as well as efficiency algorithms.
It allows to individually control the temperature of every zone conditioned by the same ducted
indoor unit. This occurs thanks to the communications that exist between the sensors installed
on each zone and the motorized elements installed on ducts. Therefore, the system covers only
the thermal load of those zones where both thermal demand and occupancy exist.
Zoning systems
The Integrated Zoning System developed by Airzone allows to regulate the air flow supplied
to each airconditioned zone and may satisfy the thermal needs of each one of them. In
addition, it includes several efficiency algorithms which by controlling Inverter heat pumps
(operation mode, set point temperature, fan speed, etc.) optimizes energy using.
4
These facts produce an increase of both comfort number of hours and energy savings as
can be seen in the following figures, extracted from an independent study from the Energy
Researching Group of the University of Malaga, Spain, with the title “Report over the Airzone
integrated zoning model and its comparison to a non-zoned system”.
Quality assurance
Our commitment to the highest quality is our hallmark. We design, develop and manufacture all
our products. They are respectful with the environment and comply with all the international
directives in terms of energy efficiency.
US FCC certificate
Intertek 4008862 UL Listed
ISO Certificates: 9001 and 14001
BREEAM
The BREEAM ratings range from Acceptable to pass, Good, Very Good, Excellent to
Outstanding. BREEAM evaluates 10 categories, and Airzone can improve the score in the
following categories:
5
Management: “Sustainable Management”
Health and Wellbeing: “Thermal Comfort” and “Thermal Zoning”
Energy: “Energy efficiency”
Pollution: “GWP refrigerant – Building facilities”
Innova on: “Exemplary level in Energy efficiency and Sustainable
management”
LEED
In LEED you can reach four levels: Certificate, Silver, Gold and Platinum. This certification
method evaluates buildings according to 8 criteria and Airzone can obtain extra points in the
following categories:
To achieve a high degree of comfort and reduce energy consumption, the communication
between the control system and AC unit is required to be perfect. The Airzone
communication gateway® is the device that enables this bi-directional communication,
improving fundamental features of the operation of the AC units.
6
Airzone communications gateways® are compatible with most AC units of the main
manufacturers in the HVAC industry.
Effective control
Airzone has developed a series of energy-efficiency algorithms that improve the energy
performance of the installation. Additionally, they offer multiple benefits to both installers and
users.
Eco-Adapt algorithm
Airzone systems allow you to limit the highest and lowest set-point temperature both in cooling
and heating. Whether it is from the Airzone Cloud webserver or from the Airzone Blueface
thermostat, the user can choose among the different Eco-Adapt modes, depending on the
desired limit temperatures, to optimize the energy consumption and save money.
Our interfaces allow the user to control the temperature, set schedules, change the operating
mode or refer to the weather information, among many other features.
BMS Integration
Our Communication with building management control systems is carried out using the
Modbus RTU native protocol.
We can apply Airzone control to other home and building automation systems, thanks to the
development of integration gateways that use different protocols such as BACnet and KNX, as
well as enable communication with other open protocols, such as LonWorks.
In order to continue to offer fully integrated solutions, we work directly with integrated building
7
management companies. An example is our collaboration with Wago and Lutron.
Users with an Airzone Cloud webserver connected to their systems will be able to enjoy voice
control functionalities, using Amazon Alexa or Google Assistant.
8
What is VAF System?
VAF is the ideal control system for HVAC since it combines the control of multi-zone and
individual fancoils with the control of radiant heating. Moreover, it can also integrate different
technologies such as chilled water and direct expansion in the same interface.
The performance of the VAF system lies on the combination of different types of Zone
Modules: individual indoor unit control, radiant element control and motorized dampers for air
supply. All these modules are connected to the Main Control Board through the Communication
Bus. Other elements such as Airzone Communication Gateways with zoned indoor units or the
Airzone Cloud Webserver connect directly with the Main Control Board.
System Features
Features by Zone
9
Esquema de conexionado
10
Esquema de instalación
11
Detalle de los cálculos
CARACTERÍSTICAS DEL EQUIPO
Referencia Tecnología Caudal (cfm) Presión total
(psi)
Presión
estática (psi) Pasarela Compuerta bypas
Expansión
Ventilador directa ED 1,000.0 0.006573 0.006466 AZVAFR#SAM -
ZONAS
Referencia Superficie (ft²) Caudal (cfm) Difusión Control
Imp/Ret
Zona 01 220.0 200.0/0.0 B09 Term. Zona 01:
TERMOSTATO BLUEFACE
Zona 02 220.0 150.0/0.0 B10 Term. Zona 02:
TERMOSTATO BLUEFACE
Zona 03 220.0 100.0/0.0 B08 Term. Zona 03:
TERMOSTATO BLUEFACE
Zona 04 220.0 100.0/0.0 B07 Term. Zona 04:
TERMOSTATO BLUEFACE
Zona 05 220.0 100.0/0.0 B06 Term. Zona 05:
TERMOSTATO BLUEFACE
Term. Zona 06:
Zona 06 220.0 75.0/0.0 B05
TERMOSTATO BLUEFACE
Term. Zona 07:
Zona 07 220.0 50.0/0.0 B04 TERMOSTATO BLUEFACE
Zona 08 220.0 75.0/0.0 B03 Term. Zona 08:
TERMOSTATO BLUEFACE
Zona 09 220.0 75.0/0.0 B02 Term. Zona 09:
TERMOSTATO BLUEFACE
Term. Zona 10:
Zona 10 220.0 75.0/0.0 B01
TERMOSTATO BLUEFACE
Total 2,200.0 1,000.0/0.0 - -
12
C24 200x150 0.3229 1 3.00 2.67 150.0 465 0.000061 0.000069 0.000131 0.001833
C25 Ø200 0.3382 1 6.00 3.11 75.0 222 0.000029 0.000056 0.000085 0.001918
C26 200x150 0.3229 1 5.00 23.86 75.0 232 0.000156 0.000033 0.000188 0.002021
C27 Ø200 0.3382 1 5.00 0.00 75.0 222 0.000000 0.000047 0.000047 0.002068
C28 200x150 0.3229 1 7.50 38.72 75.0 232 0.000252 0.000049 0.000301 0.002003
C29 Ø200 0.3382 1 7.50 0.00 75.0 222 0.000000 0.000070 0.000070 0.002074
C30 200x150 0.3229 1 5.00 84.20 50.0 155 0.000262 0.000016 0.000278 0.001739
C31 Ø150 0.1902 0 5.00 0.00 50.0 263 0.000000 0.000091 0.000091 0.001829
C32 200x150 0.3229 1 7.50 42.80 75.0 232 0.000279 0.000049 0.000328 0.001361
C33 Ø200 0.3382 1 7.50 0.00 75.0 222 0.000000 0.000070 0.000070 0.001431
C34 200x150 0.3229 1 5.00 32.13 100.0 310 0.000353 0.000055 0.000408 0.001354
C35 Ø200 0.3382 1 5.00 0.00 100.0 296 0.000000 0.000079 0.000079 0.001434
C36 200x150 0.3229 1 7.50 35.75 100.0 310 0.000393 0.000083 0.000476 0.001350
C37 Ø200 0.3382 1 7.50 0.00 100.0 296 0.000000 0.000119 0.000119 0.001469
C38 200x150 0.3229 1 20.00 29.06 100.0 310 0.000320 0.000220 0.000540 0.001302
C39 Ø200 0.3382 1 20.00 0.00 100.0 296 0.000000 0.000317 0.000317 0.001618
C40 200x200 0.4304 1 17.50 21.44 200.0 465 0.000409 0.000334 0.000743 0.001409
C41 200x200 0.4304 1 17.50 0.00 200.0 465 0.000000 0.000334 0.000334 0.001742
C42 Ø200 0.3382 1 5.00 12.35 200.0 591 0.000691 0.000280 0.000970 0.002713
C43 200x150 0.3229 1 20.00 22.64 150.0 465 0.000521 0.000460 0.000981 0.001623
C44 Ø200 0.3382 1 20.00 0.00 150.0 444 0.000000 0.000662 0.000662 0.002285
Abreviaturas:
Q Nom.: Caudal nominal Ø eqv.: Diámetro equivalente
Nivel s.: Nivel sonoro individual regenerado en la unidad terminal Long: Longitud del conducto
S Sal.: Área efectiva de salida Leqv: Longitud equivalente de las transformaciones
V Sal.: Velocidad de salida DPs: Pérdida de presión total en la transformación de entrada
DPs: Pérdida de presión total en la transformación de entrada DPf: Pérdida de presión por fricción
DPb: Pérdida de presión total en la boca DPt: Pérdida de presión total
DPv: Pérdida de presión total desde el ventilador DPt Final: Pérdida de presión total desde el ventilador
13
Airzone prescripción
LISTADO DE MATERIALES
Código de expediente: EXAMEN
Descripción: UNIDAD 3
Fecha: 12/03/2020
Otros materiales:
ft² Conducto Rectangular / Chapa galvanizada (más 10% recortes) 1,129.4337
ft Conducto Circular / Flexible Ø200 85.62
ft Conducto Circular / Flexible Ø150 5.00
14