Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
* If you use a PC which does not have a Bluetooth module, you need
a Bluetooth USB adapter to communicate with the AED. To set the
Bluetooth connection settings and install this program, you have to
install a Bluetooth driver and software before installing this program.
1
Adding the AED to the Bluetooth Device List 3. Click the Custom Mode radio button and click the Next
To communicate with the AED, you have to add the AED as a button.
Bluetooth device in the Bluetooth Manager.
NOTE
• If your PC does not have a Bluetooth module, connect a
Bluetooth USB adapter to the PC.
• The following procedure is for when you use the Toshiba
Bluetooth Stack. If you use a different Bluetooth driver
and software, refer to the manual or online help for the
Bluetooth driver and software.
• When you do the following procedure, consult the facility
manager or administrator.
NOTE
1. Click the Windows Start menu and select Programs →
Make sure that Custom Mode is selected. If Express
TOSHIBA → Bluetooth → Bluetooth Settings.
Mode is selected, you cannot set the connection settings
correctly.
4. Select the AED from the list in the Bluetooth device area and
click the Next button.
Or, right-click the Bluetooth icon on the task bar and select
Bluetooth Settings from the pop-up menu.
NOTE
• For the AED-2100K, the AED is displayed in the list
as “AED-2100K UR-0385 XXXXXX” (XXXXXX: serial
number of the AED main board).
• For the AED-2150 series, the AED is displayed in the
list as “AED-XXXX MAIN YYYYYY”. (AED-XXXX: AED
model, YYYYYY: serial number of the AED main board).
• Devices other than AED might also appear in the list.
2
5. Enter the 5 digit AED serial number (printed on the label on 9. Enter a connection name in the Connection Name text box
the back of the AED) in the Bluetooth Passkey (PIN) text and click the Next button.
box and click the OK button.
6. Select “Serial Port” in the Service selection list and click the
Next button.
7. Check the “Use default COM port” check box and click the
Next button.
3
For the AED-2150 series, check that instruction is displayed 5. The icon for the selected AED changes and shows that the
on the LCD display. AED is connected to the PC.
AED-2150 series
This icon is
displayed when the
AED is connected to
the PC.
Or, right-click the Bluetooth icon on the task bar and select
Bluetooth Settings from the pop-up menu. If you turn the AED power off after connecting the AED to
the PC, the Bluetooth Manager – Bluetooth Security window
appears. To connect the PC to the AED again, enter the 5
digit serial number printed on the back of the AED in the
Bluetooth Passkey (PIN) text box.
4
3. Select the COM port in the Port list box and click the OK • For the AED-2150 series, the battery status indicators on
button. the AED slowly blink and the following illustration is
displayed on the LCD display.
5
7. Click the OK button to start installation.
NOTE
• The installation consists of two phases: uploading and
applying the setting to the AED. When applying (the
second phase of installation) starts, there is a beep
sound; this is not an error indication.
• Do not turn the AED power off during installation.
6
Check Sheet for CPR Metronome Setting Program
Customer Information
Customer name:
Install department:
Facility:
Address:
Other Information
Installation comment:
Installed by:
Service company:
Copyright Notice
The entire contents of this manual are copyrighted by Nihon
Kohden. All rights are reserved.