Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
06803
3 Hours / 100 Marks Seat No.
Marks
[1 of 4] P.T.O.
06803 [2 of 4]
(k) Define axis of plate level.
(b) State the meaning of closing error and describe any one method of balancing
the traverse in theodolite traversing.
(c) A tacheometer fitted with analytic lens was setup at station A and following
readings were obtained on a vertically held staff.
Instrument Station Staff Station Vertical Angle Stadia Reading
A B.M. +7.0' 0.900
1.160
1.420
(a) What are tacheometric constants. Explain the principle used in tacheometry.
distance.
(b) What is stope survey ? State the purpose of stope survey and classify stope
surveying.
two plumb lines suspended from the pit top of the pit. D and E are the
underground are :
AB = 2.286 m.
BC = 2.621 m.
AC = 4.907 m.
CD = 18.348 m.
DE = 30.480 m.
(c) The cross measure drift rising at an inclination of 20 passes through a seam
of coal dipping in opposite direction of 35. The thickness of coal as measured
along the drift is 6 metres. What is the true thickness of seam ?
(e) Following are the lengths & bearing of traverse ABCD. Calculate the length
& bearing of ‘DA’.
Line Length in metres Bearing
AB 258.0 30
BC 321.0 140
CD 180.0 210
(f) A seam of uniform gradient dips 1 in 7 in the direction of S 50 E & 1 in 5 in
the direction of N 55 E. Determine the direction & rate of full dip of seam.
________________