Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Goulds Pumps
5" – 11" TEXAS PRE-ENGINEERED
SUBMERSIBLE TURBINE PUMPS
For 6" and larger wells FEATURES
■ Discharge Bowl: Several discharge sizes available (NPT).
■ Discharge Bearing: Extra long sealed top bronze bearing insures
shaft alignment and stabilization for extended life.
■ Intermediate Bowl: Class 30 cast iron. Glass coating on 6" and
larger bowls for maximum efficiency and abrasion resistance.
■ Intermediate Bearings: Available in either no-lead bronze or
rubber.
■ Impellers: Designed for maximum efficiency with a wide range
hydraulic coverage. Made of low zinc and no lead material suit-
able for drinking water applications.
■ Taperlock: Accurately machined to ensure positive locking of the
impeller to the pump shaft.
■ Upthrust Collar: Designed with extra margin of safety against
momentary upthrust at start-up.
■ Suction Adapter: Designed to ensure proper pump/motor align-
ment. Open area permits easy access to pump/motor coupling.
Casting made of ductile iron for increased strength.
■ Pump to Motor Coupling: Stainless steel coupling accurately
machined for perfect alignment, balance and power transmis-
sion.
■ Pump Shaft: 100,000 PSI high tensile type 416 stainless steel
provides strength and corrosion resistance. Ground and polished
for smooth bearing surface.
■ Powered for Continuous Operation: All horsepower ratings are
within the service limits of the motor and pump can be operated
continuously without fear of damage to the motor.
■ CentriPro Motors:
• Corrosion-resistant construction.
• Stainless steel splined shaft.
• Hermetically sealed windings on 6" motors. 8" and 10" motors
are water tight rewindable.
• Sand resistant slinger and lip seals.
Goulds Pumps is a brand of ITT Corporation. • Water filled design.
• Filter check valve.
www.goulds.com • Kingsbury-type thrust bearing.
• 6 through 30 HP motors are dual voltage (230/460) design.
Easily changed with a voltage plug.
Engineered for life
GOULDS PUMPS
3450 RPM Performance Chart Turbine
350
3450 RPM
300 60 Hz
250
10WAH
200
10WAL 11CL
9WAH 9RCH
150
9RCL
9WAL 9TH
7WAH
100
HEAD (FT.)
7CH 8R 9TL
7W 8R JH
90 JL
80 AE 7WAL
L 7CL 8DHH
70 7TH
60
6CL 6CH 7TL
50 5CH
5RWAH
40
5RWAL 5TH
6DHL 6DHH
5CL
30
5TL
25
20
.2 .3 .4 .6 .8 1.0 1.5 2.0 3 4 5 6 7 8 9 10 15 20 25 30 40
FLOW (100 GPM)
3
GOULDS PUMPS
Turbine
Model 5RWAH 110 GPM
4
GOULDS PUMPS
Model 5CLC 120 GPM Turbine
5
GOULDS PUMPS
Turbine
Model 5CHC 150 GPM
6
GOULDS PUMPS
Model 5TLC 180 GPM Turbine
7
GOULDS PUMPS
Turbine
Model 5THC 240 GPM
8
GOULDS PUMPS
Turbine
Model 6CLC 180 GPM
9
GOULDS PUMPS
Turbine
Model 6CHC 250 GPM
10
GOULDS PUMPS
Turbine
Model 6DHLC 320 GPM
11
GOULDS PUMPS
Turbine
Model 6DHHC 450 GPM
NOTES:
Upthrust Collar Polyethylene
1. All dimensions in inches and weights in lbs. Discharge Bowl ASTM A48 CI. 30B
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
Discharge Bowl Bearing ASTM B584 C89835
3¾"
4. Please specify all options changes in W.E. order number. (4" MTR.) Fasteners SAE J429 Gr. 8
51⁄2" Cable Guard ASTM A240 S30400
(6" MTR.)
Suction Strainer ASTM A240 S30400
12
GOULDS PUMPS
Turbine
Model 7WAEL 200 GPM
(All dimensions in inches and weights in lbs. Do not use for construction purposes.) Upthrust Collar Polyethylene
NOTES: Discharge Bowl ASTM A48 CI. 30B
1. All dimensions in inches and weights in lbs. Discharge Bowl Bearing ASTM B584 C89835
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory. Fasteners SAE J429 Gr. 8
4. Please specify all options changes in W.E. order number. 51⁄2" Cable Guard ASTM A240 S30400
(6" MTR.)
Suction Strainer ASTM A240 S30400
733⁄64"
(8" MTR.)
13
GOULDS PUMPS
Turbine
Model 7WALC 240 GPM
(All dimensions in inches and weights in lbs. Do not use for construction purposes.) Upthrust Collar Polyethylene
NOTES: Discharge Bowl ASTM A48 Cl. 30B
1. All dimensions in inches and weights in lbs. Discharge Bowl Bearing ASTM B584 C89835
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory. Fasteners SAE J429 Gr. 8
4. Please specify all options changes in W.E. order number. 51⁄2" Cable Guard ASTM A240 S30400
(6" MTR.)
Suction Strainer ASTM A240 S30400
733⁄64"
(8" MTR.)
14
GOULDS PUMPS
Turbine
Model 7WAHC 280 GPM
15
GOULDS PUMPS
Turbine
Model 7CLC 400 GPM
16
GOULDS PUMPS
Turbine
Model 7CHC 500 GPM
17
GOULDS PUMPS
Turbine
Model 7TLC 550 GPM
18
GOULDS PUMPS
Turbine
Model 7THC 700 GPM
19
GOULDS PUMPS
Turbine
Model 8RJLC 460 GPM
20
GOULDS PUMPS
Turbine
Model 8RJHC 650 GPM
21
GOULDS PUMPS
Turbine
Model 8DHHC 1200 GPM
22
GOULDS PUMPS
Turbine
Model 9WALC 400 GPM
23
GOULDS PUMPS
Turbine
Model 9WAHC 450 GPM
24
GOULDS PUMPS
Turbine
Model 9RCLC 850 GPM
25
GOULDS PUMPS
Turbine
Model 9RCHC 1100 GPM
26
GOULDS PUMPS
Turbine
Model 9TLC 1300 GPM
27
GOULDS PUMPS
Turbine
Model 9THC 1600 GPM
28
GOULDS PUMPS
Turbine
Model 10WALC 600 GPM
29
GOULDS PUMPS
Turbine
Model 10WAHC 850 GPM
30
GOULDS PUMPS
Turbine
Model 11CLC 1400 GPM
31
IT T Turbine