Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
HH Technology Corp.
500 Cummings Center, Suite 3470
Beverly, MA 01915
Condensate Accumulator
V-4083
CONFIDENTIAL
Note:
The manufacturer is responsible for ensuring that the equipment is designed and constructed in accordance with the
specifications and codes referred to on the requisition and or drawings. Furthermore, the manufacturer is responsible for
ensuring that the design, calculations and thicknesses of material supplied to the manufacturer are for information and
tendering purposes only. The manufacturer shall make his own calculations for which he is fully responsible. The
manufacturer shall ensure that the equipment supplied conforms to all applicable codes and national statutory
regulations, and he shall obtain all necessary approvals from statutory authorities.
The information contained in this document is the property of HH Technology Corp. and is not to be copied or
disclosed to third parties without the prior written consent of HH Technology Corp. nor is it to be misused in any way.
Issue Rev. A
Date 10/29/2015
Prepared by KE
Checked by MD
Approved by UG
Issued by MM
Remarks to Rev. A – Issue For Design
CONDENSATE ACCUMULATOR
ITEM NO. V-4083
No. Required 1
Manufacturer/Supplier Local
Type of Construction Vertical
Service (Batch or Continuous) Batch (normally empty, when filled max. 0.3 m³ and operates in a
temperature range between 30 and 80 oC)
Location (Indoor/Outdoor) Outdoor ( min / max 5°C / 42°C )
SPECIAL REQUIREMENTS
Page 2 of 6
CONDENSATE ACCUMULATOR
ITEM NO. V-4083
GENERAL NOTES
Page 3 of 6
CONDENSATE ACCUMULATOR
ITEM NO. V-4083
Notes
By Vessel Supplier
Galvanized and Phosphatized
Page 4 of 6
CONDENSATE ACCUMULATOR
ITEM NO. V-4083
NOZZLE TABLE
Nozzle No. N1 N2 N3 N4 N5 N6
Service Condenser Product Nitrogen Level Jacket Spare
Connection Drain Feed Transmitter Outlet
Top Inlet Bottom Top inlet Top Side Bottom Top
Outlet Instr. Outlet
Size 20“ 2“ 1“ 3“ 1“ 2“
Flange Standard ANSI ANSI ANSI ANSI ANSI ANSI
Flange Type Weld Neck Weld Neck Weld Neck Weld Neck Weld Neck Weld Neck
Pressure Rating 150 150 150 150 150 150
Flange Facing Raised Face Raised Face Raised Face Raised Face Raised Face Raised Face
Pipe Dimensions
Blind Flange - - Yes - - Yes
Gasket Grooved Grooved Grooved Grooved Grooved Grooved
Gaskets Gaskets Gaskets Gaskets Gaskets Gaskets
Davit Etc. - - Yes - - -
Bolt Standard
Dip Pipe - - - - - -
EX-2083
U-tube
Condenser
Rev.
Notes:
Page 5 of 6
CONDENSATE ACCUMULATOR
ITEM NO. V-4083
NOZZLE TABLE
Page 6 of 6
HH Technology
Corp.
Engineering & Technology