Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DAFTAR PUSTAKA
American Association of State Highway and Transportation Officials,2008, Standar
Method of Test for Theorical Maximum SpesificGravity and Density of
Bitmuminous Paving Mixtures. T209-08 Standar Spesifications For
Transportation Materials Of Sampling And Testing Part 2a : Test 28th
Edition. Washington,DC:AASTHO.
American Association of State Highway and Transportation Officials,2008, Standar
For Supervave Volumetric Design for Hot Mix Asphalt (HMA). R 35-04.
Standar Spesifications For Transportation Materials Of Sampling And
Testing Part 1b : Test 28th Edition. Washington,DC:AASTHO.
American Association of State Highway and Transportation Officials,2008, Standar
For Supervave Volumetric Mix Design M 323-0. Standar Spesifications For
Transportation Materials Of Sampling And Testing Part 1b : Test 28th
Edition. Washington,DC:AASTHO.
Asphalt Institute,2007 The Asphalt Handbook, Manual Series No.4 (MS-4)
Kentucky: The Asphalt Institute.
Arselina Wood Ward Wiyono, Arief Setiawan, dan Nur hidayat,(2012) Pengaruh
Suhu Terhadap Modulus Elastis dan Angka Poison Beton Aspal Lapis Aus
((AC-WC) Dengan Kapur Sebagoi Filler, Jurnal Rekayasa dan Manajemen
Transportasi, Volume II No. 2 Hal. 105-114
Abtahi SM, Sheikhzadeh M, Hejazi SM. Fiber-reinforced asphalt-concrete-a review.
Constr Build Mater 2010;24:871–7
Abtahi SM, Khodadadi R, Hejazi SM, Tavakkol E. A feasibility study on the use of
polypropylene fibers as a modifier in asphalt-concretes made from steel
slag. In: 4th national conference on bitumen & asphalt, Tehran, Iran;2008.
Abtahi SM, Ameri M, Sheikhzadeh M, Hejazi SM, Rahnama E. A comparative study
on the use of sbs polymers and poly propylene fibers modifying asphalt
concrete structures. In: 8th international conference sustainable
aggregates,asphalt technology and pavement engineering, Liverpool, UK;
2009.
Agarwal, B.D. and Broutman, L.J., 1980, “Analysis and performance of fiber
composites,” John Wiley & Sons, New York, pp.3-12.
Bina Marga,2010, Spesifikasi Umum Bidang Jalan dan Jembatan, Jakarta Direktorat
Bina Teknik.
Bhowmic M, Mukhopadhyay S, Alagirusamy R. Mechanical properties of natural
fibre-reinforced composites. Textile Progress 2012;44:85140.
Chiristiani E.S., 2008.’ Karakterisasi Ijuk Pada Papan Komposit Ijuk Serat Pendek
Sebagai Perisai Radiasi Neutron. Tesis Magister Sekolah Pascasarjana Ilmu
Fisika USU Medan.
E.A. Oluwasola, M.R. Hainin, M.M.A. Aziz, Evaluation of rutting potential and skid
resistance of hot mix asphalt incorporating electric arc furnace steel slag and
copper mine tailing, Indian J. Eng. Mater. Sci. 22 (5) (2015) 550–558
E.J. Jaselskis, H.C. Han, J. Grigas, L. Tan, D. Fahrion, Status of roller mountable
microwave asphalt pavement density sensor, J. Constr. Eng. Manage. 127 (1)
(2001) 46–52.
F.L. Roberts, P.S. Kandhal, E.R. Brown, Y.R. Kim, D.Y. Lee, T.W. Kennedy, Hot Mix
Asphalt Materials, Mixture Design and Construction, third ed., NAPA
Research and Educational Foundations, Lanham, Maryland, 2009.
G.D. Airey, A.E. Hunter, A.C. Collop, The effect of asphalt mixture gradation and
compaction energy on aggregate degradation, Constr. Build. Mater. 22 (5)
(2008) 972–980.
Guocheng Qi, Shanyi Du, Boming Zhang, Yalin Yu, A new approach to assessing
carbon fiber/epoxy interfacial shear strength by tensile test of 45 fiber bundle
composites: Experiment,modeling and applicability, Composites Science and
Technology 129 (2016) 214e221
Gomaa KM. Effect of addition of short fibres of poly-acrylic and polyamide to asphalt
mixtures. Alex Eng J 2003;42(3):329–36
Harold N. Atkins, (1997), Highway Materials, Soils and Concretes, 3th Edition
Prentice Hall, New Jersey.
Ishak M.R., S.M. Sapuan, Z. Leman, M.Z.A.Rahman, U.M.K. Anwar, J.P. Siregar,
2013, Sugar palm (Arenga pinnata): its fibres, polymers and composites.
Carbohidrate Polymers. Vol 91 p.699-710.
Khattak MJ, Khattab A, Rizvi HR, Zhang P. The impact of carbon nano-fiber
modification on asphalt binder rheology. J Constr Build Mater 2012;30: 257–
64
Kerbs, R.D dan Walker, R.D, 1971, Highway Materials, McGraw-Hill Book
Cpmpany, New York, USA.
Karus, M., Kaup, M., 2002, Natural Fibers in the European Automotive Industry,
Journal of Industrial Hemp, vol.7, no. 1, pp. 119-131
Kang Y.G and Song J, 2009, “ Structure and Compression Bahavior of Macro-
composite Starch Foams. Journal cellular plastics vol 45. pp.33 - 49
Kim YR, Seo Y, King M, Momen M. Dynamic modulus testing of asphalt concrete in
indirect tension mode. Journal of Transportation Research Board,No. 1891.
Washington (DC): National Research Council; 2004. p. 163–73.
172
Li Yue., Shoemaker., Shen X., Ma. Jianguo., Ibanez A.M and Zhong Fang, 2008,
”The Isolation Of rice Starch With Food Grade Proteases Combined With
Other Treatment”, journal Food Science and Technology Intenational
pp.215-224.Engeneering (47) pp.606-612.
Lee SJ, Rust JP, Hamouda H, Kim YR, Bordon RH. Fatigue cracking resistance of
fiber reinforced asphalt concrete. Textile Res J 2007;75(2):123–130
L.A. Cooley Jr, K.L Williams, Evaluation of hot mix asphalt (HMA) lift thickness, in:
Research Report FHWA/MS/DOT-RD-09-193, Departments of
Transportation, Mississippi, 2009.
Mardin, 2015. Sifat Mekanik Bio Komposit Serat Ijuk dan Matriks Kanji Sagu,
Disertasi Program Doktor Teknik Mesin Program Pascasarjan Universitas
Brawijaya Malang.
173
Matta AK, Rao RU, Suman KNS, Rambabu V. Preparation and characterization of
biodegradable PLA/PCL polymeric blends.Procedia Materials Science
2014;6:1266-1270.
Munandar, Imam. 2012. Sifat Mekanik Dan Sifat Fisis Pada Serat Ijuk (Arenga
Pinnata Merr). Universitas Lampung Bandar Lampung.
Muller, D.H., Krobjilowski, A., 2003, New Discovery in the Properties of Composite
Reinforced with Natural Fibers, Journal of Industrial Textiles, vol.33, no.2,
pp.11 1-130 Sage Publ.
Modarres A, Hamedi H. Effect of waste plastic bottles on the stiffness and fatigue
properties of modified asphalt mixes. Mater Des 2014;61:8–15
Mohanty Amar K. Misra M., Drzal L.T 2007, Natural Fibers, Biopolymers, and
Biocomposites, CRC Press Taylor & Francis Group Published by 6000
Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742
Moreno F, Sol M, Rubio C, et al. Reuse of thermal power plant slag in hot
bituminous mixes. Constr Build Mater 2013;49:144–50
174
M.R. Hainin, L.A. Cooley Jr, B.D. Prowell, An investigation of factors influencing
permeability of Superpave mixes, Int. J. Pavements 2 (2) (2003) 41–52.
Mohd Rosli Hainin, Ebenezer Akin Oluwasola,, E. Ray Brown Density profile of hot
mix asphalt layer during compaction with various types of rollers and lift
thickness, Construction and Building Materials 121 (2016) 265–277
M.R. Hainin, N.I.M. Yusoff, M.K.I.M. Satar, E.R. Brown, The effect of lift thickness on
permeability and the time available for compaction of hot mix asphalt
pavement under tropical climate condition, Constr. Build. Mater. 48 (2013)
315–324.
Mohd Rosli Hainin, Ebenezer Akin Oluwasola,, E. Ray Brown, 2016. Density profile
of hot mix asphalt layer during compaction with various types of rollers and lift
thickness. Construction and Building Materials 121 (2016) 265–277
Ning Wang, Xing Xhiang., Na Han and Jiang Ming Fang, 2010., “Effect Of Water
On The Properties Of Thermoplastic Starch Poly(lactic acid) Blend
Containing Citrid Acid. Journal Of Thermoplastic Composite Material Vol 23
pp.19-33
O.S. Abiola, W.K. Kupolati, E.R. Sadiku, J.M. Ndambuki;(2014), Utilisation of natural
fibre as modifier in bituminous mixes: A review, Jurnal Construction and
Building Materials 54 (2014) 305–312
Putman BJ, Amirkhanian SN. Utilization of waste fibers in stone matrix asphalt
mixtures. Resour Conserv Recc 2004;42:265–74.
Pronk AC, Four point dynamic bending test. DWW-96-088, Road and Hydraulic
Division. Netherlands: 2006; 23–7.
Q. Wu, M. Li, Y. Gu, Y. Li, Z. Zhang, Nano-analysis on the structure and chemical
composition of the interphase region in carbon fiber composite,Compos. Part
A Appl. Sci. Manuf. 56 (2014) 143e149.
176
Qinglin Guo, Lili Li, Yongchun Cheng, Yubo Jiao, Chun Xu; (2015), Laboratory
evaluation on performance of diatomite and glass fiber compound modified
asphalt mixture, jurnal Materials and Design 66 (2015) 51–59
Qunshan Ye, Shaopeng Wu, Ning Li;(2009), Investigation of the dynamic and
fatigue properties of fiber-modified asphalt mixtures, International Journal
of Fatigue 311598–1602
R.N. Linden, J.P. Mahoney, N.C. Jackson, Effect of compaction on asphalt concrete
performance, Transp. Res. Rec. 1217 (1989).
Rowell, R.M., Young, R.A., and Rowell, J.K., 1997, “Chemical Composition of
Fibers: Paper and Composites from Agro-based Resources,”Lewis
Publishers, CRC Press, pp.85-91.
R.Y. Kim, Modeling of Asphalt Concrete, ASCE Press, Unites States of merica,2009
Sjöqvist M., Boldizar and Rigdahl, 2009, Processing and Properties of Expnded
Starch Material”. Journal of cellular Plastics vol 45 January pp.51-66.
Sahari J., Sapuan S.M., (2011) Natural Fiber Reinforced Boidegradable Polymer
omposites, Rev. Adv. Mater. Sci. (30) pp. 166-174
Serfass J, Samanos J. Fiber-modified asphalt concrete haracteristics,applications
and behavior. J Assoc Asph Pav Tech 2006;65:193–230.
177
S.A. Cross, J.C. Lee, Evaluation of the superpave gyratory compactor for low
volume roads, Kansas DOT Report No. KS-00-2, 2000.
Turatsinze A. Bonded cement-based material overlays for the repair, the lining or
the strengthening of slabs pavements. RILEM State of the Art Reports.
2011.
Thakur VK, Singha AS, Thakur MK. Green composites from natural fibers:
Mechanical and chemical aging properties. International Journal of Polymer
Analysis and Characterization 2012;17:401-407.
Wang Ning, Zhang Xingxiang, Han Na And Fang Jianming., 2010, Effects of Water
on the Properties of Thermoplastic Starch Poly(lactic acid) Blend
Containing Citric Acid. Journal of Thermoplastic Composites Materials,
(23), pp.19-34.
Xue Qiang, Liu Lei,Chen Yi-junStudy on the action effect of pavement straw
composite fiber material in asphalt Construction and Building Materials 43
(2013) 293–299
Yin AY, Yang XH, Zeng GW, et al. Fracture simulation of pre-cracked
heterogeneous asphalt mixture beam with movable three-point bending
load. Constr Build Mater 2014;65:232–42
Yoder, E.Y. and MW Witczak, 1975, Principles of Pavement Design. New York:
Wiley
Interscience Publication
Y.H. Huang, Pavement Analysis and Design, Pearson Prentice Hall, New
Jersey,2004
Z.A. Khan, H.I. Wahab, I. Asi, R. Ramadhan, Comparative study of asphalt concrete
laboratory compaction methods to simulate field compaction, Constr.Build.
Mater. 12 (1998) 373–384.
Zhang Li Ming., 2005., Yang Chuan, and Yan Lin” Strategies to Fabricate Strach
based Hydrogels With Potential Biomedical Applications. Journal of Bioactive
and Comptible Polymers (20) pp. 297-314.
Zhou, L.M., Yeung, K.W.P., Yuen, C.W., 2002, Effect of NaOH Mercerization on the
Crosslinking of Ramie Yarn Using 1,2,3,4-Butanetetracarboxylic Acid, Textile
Research Journal, vol. 72, no.6, Sage Publ.