Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Service 221TE4LB/57
Service 231TE4LB/57
Service 221TE4LB/55
231TE4LB/44
231TE4LB/55
231TE4LB/45
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGE
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
Revision List
Version Release Date Revision History
Never insert objects into the ventilation slots or other openings on the TV.
When the TV is swiveled ensure that no strain is exerted on the power cord. Strain on the power cord can
loosen connections and cause arcing.
Risk of short circuit or fire!
Never expose the remote control or batteries to rain, water or excessive heat.
Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire.
Risk of injury or damage to the TV!
Two people are required to lift and carry a TV that weights more than 25 kg.
When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV
on a flat, level surface that can support the combined weight of the TV and stand.
When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall
mount to a wall can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics
N.V. bears on responsibility for improper wall mounting that result in accident, injury or damage.
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to
children:
Never place the TV on a surface covered by a cloth or other material that can be pulled away.
Ensure that no part of the TV hangs over the edge of the surface.
Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the
wall or a suitable support
Educate children about the dangers of climbing on furniture to reach the TV.
Risk of overheating! Never install the TV in a confined space. Always leave a space of at least 4 inches around
the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV.
Risk of damage to the TV! Before you connect the TV to the power outlet, ensure that the power voltage
matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is
different.
Risk of injury, fire or power cord damage! Never place the TV or any objects on the power cord.
To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power
cord at all times.
4 Meridian 4
When you disconnect the power cord, always pull the plug, never the cable.
Disconnect the TV from the power outlet and aerial before lightning storms. During lightning storms, never touch
any part of the TV, power cord or aerial cable.
Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of
time.
If the TV is transported in temperatures below 5℃, unpack the TV and wait until the TV temperature matches
room temperature before connecting the TV to the power outlet.
Screen Care
Avoid stationary images as much as possible. Stationary images are images that remain on-screen for
extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use
stationary images, reduce screen contrast and brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household
cleaners on the TV.
Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.
To avoid deformations and color fading, wipe off water drops as soon as possible.
Recycling
Your product is designed and manufactured with high quality materials and components, which can be recycled
and reused. When you see the crossed-out wheeled bin symbol attached to a product, it means the product is
covered by the European Directive 2002/96/EC:
Never dispose of your product with other household waste. Please inform yourself about the local rules on the
separate collection of electrical and electronic products. The correct disposal of your old product helps prevent
potentially negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with
normal household waste.
Please inform yourself about the local rules on the separate collection of batteries. The correct disposal of batteries
helps prevent potentially negative consequences for the environment and human health.
Contrast 1000:1
AV INPUT
SPDIF OUT
TV ANTENNA
HDMI
HEADPHONE
Standby <1W
Operating 0C ~ 40 C
Temperature
Storage -10C ~ 50C
Note: Product information is subject to change without notice. For detailed product information, go to
www.philips.com/support
6 Meridian 4
2. TV Monitor Description
The TV monitor will contain a scaler board, a power board, an IR board and a key board. The scaler board houses
the flat panel control logic, brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the scaler board chips
each voltage.
LED Panel
VGA
USB
HDMI
Power Board
Scaler Board SPDIF
(Include: Power, LED Driver)
AUDIO
TUNER
COMPONENT
AV Signal, DDC
AC-IN
Key Board HOST Computer
100V-240V
IR Board
Meridian 4 7
3. Operating Instructions
3.1 Front and side controls 3.2 Connection Overview
Back Connector
6. TV ANTENNA
Signal input from an antenna, cable or satellite
1. HDMI
Digital audio and video input from high-definition digital
devices such as Blu-ray players.
2. USB
For music and photo
10 Meridian 4
3.3 Remote Control 5. (Yellow button)
Set the block channels in channel menu.
6. (Blue button)
Delete the channel in channel menu.
7. OPTION
Press to display a list of options.
8. ▲ ▼ ◄ ► (Navigation buttons)
(No functions)
Navigate through the menus.
9. OK
Confirm an entry or selection.
10.BACK/
• Return to the previous screen.
• Return to the last viewed channel.
11. P +/-
Switch to the next or previous channel.
12. (Mute)
Switch the sound On or Off.
14. PREV CH
• Return to the previous screen.
• Return to the last viewed channel.
16. MENU
Press to open or close the on-screen menu.
17. FORMAT
Switch to different aspect ratio.
1. (Standby-On)
Switch the monitor to standby if the monitor is on. 18. (Red button)
Switch the monitor on if the monitor is in standby. • Set the favorite channel.
• Set the default setting for some options.
2. SOURCE
Select connected devices. 19. (Green button)
Set the skip channels in channel menu.
3. INFO
Display or hide the information screen about the 20. CC
HDMI Connector
7 TMDS Data0+ 14 NC
USB
1 VCC 3 DATA+
2 DATA- 4 GND
12 Meridian 4
4.2 Factory Preset Modes acceptable defect levels for each type. In order to
Computer Formats qualify for repair or replacement under warranty, the
1080p 24Hz, 50Hz, 60Hz Pixel and sub pixel defects appear on the screen in
different ways. There are two categories of pixel
defects and several types of sub pixel defects within
4.3 Pixel Defect Policy
each category.
Philips strives to deliver the highest quality products.
We use some of the industry's most advanced
Bright Dot Defects: Bright dot defects appear as
manufacturing processes and practice stringent quality
pixels or sub pixels that are always lit or 'on'. That is, a
control. However, pixel or sub pixel defects on a flat
bright dot is a sub-pixel that stands out on the screen
monitor panel are sometimes unavoidable. No
when the monitor displays a dark pattern.
manufacturer can guarantee that all panels will be free
These are some types of bright dot defects:
from pixel defects, but Philips guarantees that any
monitor with an unacceptable number of defects will be
repaired or replaced under warranty. This notice
explains the different types of pixel defects and defines
Meridian 4 13
Note:
A red or blue bright dot must be more than 50 percent
brighter than neighboring dots while a green bright
dot is 30 percent brighter than neighboring dots.
1 lit subpixel 3
Note:
Nutune IF TS Stream
FK1604 TC90517FG
STA339BWTR
Speaker SPEAKER
L/R Amplifier
HDMI 1
HDMI 2
YPbPr +Audio IN
SPDIF Out
Service Only
LVDS
USB Interface
Ethernet
4M bit
64Mx16_DDR3 Serial NAND Flash
Flash 128Mx8 bit
Meridian 4 17
5.2 Power Board
221TE4L
16V
AC Input Bridge Rectifier Rectifier
EMI Filter Transformer 5.2V
and Filter Diodes
Start Resistor
(R906, R909, R911)
Feedback
PWM Control Circuit
LD7576AGR Power Switch
(IC901) (Q901)
Photocoupler
(IC902)
Start Resistor
(R905, R908, R909)
Feedback
PWM Control Circuit
LD7750RGR Power Switch
(IC901) (Q901)
Photocoupler
(IC902)
2
R736 NC/0R05 1/10W
FB729
R702 R737
4.7K 1/10W R703 NC/4.7K 1/10W 120R/3000mA U703
1K 1/10W NC/4.7K 1/10W 4.7K 1/10W 5V TO263 L0603 TO252 HP_VDDM HP_VCC_15
U702
100N 50V
22UF 6.3V
R701 R704 G1084T43Uf FB706
1
BL_ON/OFF_PRE FB705 1 2 G1084-33TU3Uf TO252GOI C0603 C0805
BL_ON/OFF
120R/6000mA 3 TO263GOI 2 3 2 1 2
VIN VOUT VIN VOUT
10uF 6.3V
L0805 R802 R739 120R/3000mA
Q706 10U 16V 4.7K 1/10W 1K 1/10W L0603
GND
ADJ
C706
C701 Q701 PMBS3904 C767 C768 C0805 C702 +
PMBS3904 R738 22UF 6.3V 5V 3.3V C0603
R706
C703
C704
C705
100N 50V 1K 1/10W 470UF 16V
1
R707
NC/4.7K 1/10W 4.7K 1/10W R708 R709
CN701 4.7K 1/10W
10K 1/10W NC/4.7K 1/10W 100R
1 BL_ON/OFF_PRE R710 R711 R0603
2 BRT_CTRL_PRE BRT_CTRL_PRE FB708 1 2 C707 +
3 12V_PRE 120R/6000mA 470UF 16V
4 12V_PRE L0805 R713
BRT_CTRL
5 12V_PRE FB709 1 2 C710 Q702 22 OHM +-1% 1/10W
12V
1
1
6 120R/6000mA NC/10uF 6.3V PMBS3904 R712 R0603
7 C713 L0805 C714 C716 1K 1/10W
8 24V_PRE FB740 FB741 100N 50V 100N 50V + 330UF 35V
9 24V_PRE 0R05 OHM 0 OHM
10 PS_ON_PRE C0603 C0603
11 5VSB_PRE 10x9mm
2
5VSB_PRE 24V_PRE
12
13 5VSB_PRE
FB710 1 2
120R/6000mA
24V 0.21A
PS_ON_PRE C719 L0805 C720 C721 5VSB U704 FB711 HP_VCC_25
100N 50V 100N 50V + 330UF 35V
100N 50V
22UF 6.3V
5V 3 2 C0603 C0805 1 2
R791 VIN VOUT
NC/CONN C0603 C0603 120R/3000mA
5VSB_PRE L0603
GND
10x9mm
NC/4.7K 1/10W
C722
C723
CN704
R714
NC/4.7K 1/10W NC/4.7K 1/10W
1 5VSB_PRE
2 5VSB_PRE R716
3 5VSB_PRE FB712 1 2 R715
4 PS_ON_PRE NC/120R/6000mA R0402 NC/33R 1/16W 5%
5 24V_PRE L0805 Q703
24V_PRE PS_ON
6 FB714 NC/PMBS3904 5VSB U705 3VSB
7 5VSB R717 FB713
8 1 2 NC/4.7K 1/10W G1084-33TU3Uf
9 120R/6000mA 3 TO263GOI 2 1 2
10 12V_PRE C726 FB715 L0805 C728 VIN VOUT
11 12V_PRE 100N 50V C727 + C729 100N 16V 3.3V, 120R/3000mA
L0603
GND
12 BRT_CTRL_PRE 1 2 470UF 16V 1N 50V C724 +
13 BL_ON/OFF_PRE C0603 120R/6000mA
L0805 C0402
C0402 3.3VSB, 470UF 16V + C765
470UF 16V
2.5V,
1
CONN
1.5V
2
1 GND FREQ 8 D701
+ C734 C735 COMP FB 9
470UF 16V 100N 16V Thermal Pad SK54B R725 C739 C740
C0402 C736 56A379-92 SMB C737 C738 3.6K 1% NC 22UF 6.3V
1
10U 16V R726 R727 100N 50V 22UF 6.3V C0603 C0805
C0805 27K 1/10W 1% 120K 1/10W 1% C0603 C0805
R0603 R0603
Fs = 600K Hz
C744 C745
NC 1nF R728
C0603 C0603 9.1KOHM +-1% 1/10W
2
FB721 NC/220R/2000mA
FB731
VA_1.1 NC/220R/2000mA 1 2 0.26 A
FB720 NC/220R/2000mA
3.3V 3.3V
U701 202mA
1
1 2
9
10K+-5%1/16W 9
R730 1 E-Pad 8 C741 4 5 C742
R732
TH1
2 POK GND 7 + NC/100UF 16V 3 NC NC 6 + 100UF 16V
3 VEN ADJ 6 360OHM 1/10W EC63 2 VIN VO 7 C743
R729
1UF 10V 10uF 10V
FB726
1 2
Vo=0.8(1+R752/R751)=1.116V
120R/3000mA
C747
R734
10uF 10V
0.5((22K+20K+4K7)/4K7)=4.96V
1.1V
5V_TUNER MEMC_5V1
AGND
2
2
FB732 FB733
220R/2000mA
220R/2000mA 3.3V_TUNER
1
U709 FB725 220R/2000mA
1
5VSB G903T63UF
CN702 MEMC5V 3 2 1 2
14
VIN VOUT
GND
12 1 NC/120R/3000mA
2
11 C749 C766
4
10 1uF 16V 10U 16V
4
9 FB727
8
7
6
MEMC_SCL
5
MEMC_SDA
4
MEMC5V_SW
3
V105_SW
2
V105DLL_SW
3.3V_TUNER
1
RESET_FRC
13
NC/CONN
Meridian 4 21
Remark: Parts position can be searched by using FIND function in PDF.
Key and IR interface 3VSB
NC/0R05 1/10W
R222
R408 R404
4.7K 1/10W NC/4.7K 1/10W
3VSB NC/BC857C TouchKey _VCC
2
120 OHM Q210
FB402 1K 1/10W Q401 1
LED_R spec 100mA max
R403 PMBS3906 R402 NC/0.1uF 50V
L_R 1 2 C218
3
4.7K 1/10W R233
R247 NC/1K 1/10W
2
NC/4.7K 1/10W
Q402 1
NC BAS32L LED_B
NC/PMBS3906
D401 R405
Key _POR#
3
NC/4.7K 1/10W
D402
L_B
R406
For ITE touch keypad IC only
NC/BAS32L NC/1K 1/10W
ZD407 MLVG0402
1
ZD406 MLVG0402
ZD408 NC/MLVG0402
R410
NC/0R05 1/10W
1 A/I? = NC R411
LightSensor_SCL Lightsensor
2 0R05 1/16W
LightSensor_SDA SCL_Demod
3 R412 0R05 1/16W 120 OHM R407
L_R SDA_Demod
4 FB401 10K 1/10W
5 L_B
6 1 2 IR_D
IR_D
2
7
8
9 ZD404 C402
10 0.1UF 16V MLVG0402 NC/0.1UF 16V
11
C405
12 1
13 LightSensor_SDA C404
14 LightSensor_SCL NC/0.1UF 16V 3VSB
2
1 2
A/I? = NC A/I? = NC KEY _VOL_CH
ZD402 FB403
2
1
22 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
SXL_1/2_Power 1
3.3V VA_1.1 HP_VCC_25
3.3V VA_1.1 HP_VCC_25
U401F TSXL28-B1A10-H
FB421 FB422
AVSS11_SP4
R421
0R05 OHM
C435 100N 16VF22
INN16 27x27 FB426
FB427
0R05 OHM INN234
(1/8) for CODEC
AVDD
3.3V analog p ower_ AVDD
AVSS
M21
N21
C437
100N 16V
C438
10uF 6.3V
120R/600mA
N24
1 2 SXL_VDD_4 G21 AVSS P22
120R/600mA AVDD33_SP234 AVSS FB428
C439 C440
10uF 6.3V 100N 16V D23 AC24 SXL_VDD_14 1 2
AVSS33_SP234 AVDDKMNPLL 120R/600mA
2.5V An alog power_
for KMNP LL C441 C442
AB21 100N 16V 10uF 6.3V
AVSSKMNPLL
FB429 FB430
1 2 SXL_VDD_6 M5 E6 SXL_VDD_16 1 2
120R/600mA PLL_VDD VDDP 120R/600mA
2.5 V Analo g power 2.5V power_
C447 C448 C449 for DDRP LL for LVDS1 P LL C450 C451
10uF 6.3V 1UF 10V 100N 16V M6 J10 100N 16V 10uF 6.3V
PLL_VSS GNDP
FB435
ASXL fo r LVDS LVDS_GND
LVDS_GND
J9
J11
C454
100N 16V
C455
10uF 6.3V
1 2 SXL_VDD_8 D15
120R/600mA
C456 C457
D16
E15
VDD33A
VDD33A 3.3 V HDMI power 27x27
10uF 6.3V 100N 16V E14 VSS33A Shielding, only show on PCB, not draw on schematic.
VSS33A
(2/8) VDD25
AC21 SXL_VDD_18 1
FB436
2 H1
FB437 2.5V power_ 120R/600mA
for USB C458 C459
1 2 SXL_VDD_9 F14 V17 100N 16V 10uF 6.3V
120R/600mA VDD10A VSSA
1.0 V HDMI power
C460 C461
10uF 6.3V 100N 16V D14
VSS10A
FB439
FB438
J22 SXL_VDD_19 2 1
2 1 SXL_VDD_10 AB20 AVDD25_REF_BG 120R/600mA
VDD33 2.5V Analog P ower_
120R/600mA 3.3V power fo r_ fo r Video AFE C464 C465
C462 C463 USB Com m on Block M18 100N 16V 10uF 6.3V
10uF 6.3V 100N 16V V18 AVSS25_REF_BG
VSSAC
Meridian 4 23
Remark: Parts position can be searched by using FIND function in PDF.
SXL_3_Power 2/ Config
HP_VCC1V 3.3V 3VSB HP_VCC_15 3.3V 10uF 6.3V100N 16V100N 16V100N 16V100N 16V100N 16V 3VSB
C4002 C4003 C4004 C4005 C4006 C4007
AC18
C4001 C4008 C4009
AA13
AA14
AA15
AA16
AA17
AA18
AB18
AA20
AC4
D10
D11
D17
D18
D19
AA7
AB4
AA4
AA5
AA6
E10
E11
E17
E18
E16
F10
F11
F16
F17
F18
F15
F20
T24
W4
W5
W6
10uF 6.3V 10uF 6.3V 10N 50V
D7
D8
D9
D5
G4
G5
H4
H5
H6
N5
N6
G6
R5
R6
E7
E8
E9
F7
F8
F9
P5
P6
Y4
Y5
Y6
J6
U401H TSXL28-B1A10-H
VDDF1
VDDF2
VDDF3
VDDF3
VDDF3
VDDF3
VDDF4
VDDF_STB
VDDF_STB
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDM
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDC
VDDFLASH
VDDFLASH
VDDC: 1.0V, core power VDDF: for VDDM: 1.5V, m em ory I/O power
3.3V digit al IO VDDF_ST B: for 100N 16V 100N 16V 100N 16V 10N 50V 10N 50V
3.3V ST B IO HP_VCC_15 10uF 6.3V10uF 6.3V10uF 6.3V10uF 6.3V 100N 16V 100N 16V 100N 16V 10N 50V 10N 50V
C4011 C4012 C4013 C4014 C4015 C4023 C4016 C4017 C4018 C4019 C4020 C4021 C4022 C4024
C4010
27x27
(3/8) HP_VCC1V 10uF 6.3V10uF 6.3V10uF 6.3V
C4026 C4027 C4028
100N 16V100N 16V100N 16V100N 16V100N 16V100N 16V
C4029 C4030 C4031 C4032 C4033 C4034
POWER/GROUND
C4025
10uF 6.3V
A26 VSS
AF1 VSS
AF26 VSS
J12 VSS
J13 VSS
J14 VSS
J15 VSS
J16 VSS
J17 VSS
K10 VSS
K11 VSS
K12 VSS
K13 VSS
K14 VSS
K15 VSS
K16 VSS
L10 VSS
L11 VSS
L12 VSS
L13 VSS
L14 VSS
L15 VSS
L16 VSS
M9 VSS
M10 VSS
M11 VSS
M12 VSS
M13 VSS
M14 VSS
M15 VSS
M16 VSS
N9 VSS
N10 VSS
N11 VSS
N12 VSS
N13 VSS
N14 VSS
N15 VSS
N16 VSS
N17 VSS
P9 VSS
P10 VSS
P11 VSS
P12 VSS
P13 VSS
P14 VSS
P15 VSS
P16 VSS
P17 VSS
R9 VSS
R10 VSS
R11 VSS
R12 VSS
R13 VSS
R14 VSS
R15 VSS
R16 VSS
R17 VSS
R18 VSS
T10 VSS
T11 VSS
T12 VSS
T13 VSS
T14 VSS
T15 VSS
T16 VSS
T17 VSS
U9 VSS
U10 VSS
U11 VSS
U12 VSS
U13 VSS
U14 VSS
U15 VSS
U16 VSS
U17 VSS
U18 VSS
V9 VSS
V10 VSS
V11 VSS
V12 VSS
V13 VSS
V14 VSS
V15 VSS
V16 VSS
K9 VSS
VSS
T9 VSS
VSS
10N 50V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V
C4035 C4036 C4037 C4038 C4039 C4040 C4041 C4042 C4043 C4044 C4045
A1
L9
Boot from SPI (System Config NAND+SPI)
3.3V
R4001 4.7K 1/16W No PIN Configure Pin Description & Setting(* as default setting)
FRA11
R4002 0R05 OHM R4003 NC 4.7K 1/16W
HP_TXD
R105
100R
R/G/B : 75 Ohm Trace 100N 16V
C102
GRN R101 0R05 1/16WR0402
17
PC_G_IN
RED_GND
6 RED R106 C0402
RX 11 1 GRN_GND 100R
7 GRN
VGA_SDA 12 2 BLU_GND R107 C101 C103
8 BLU 75R NC NC
VGA_HIN 13 3 VGA_5V
9 GRN_GND
2
VGA_VIN 14 4
10
VGA_SCL 15 5 D101
CN101
CONN
16
1
VPORT0603100KV05 100R 100N 16V
D0603 R108 C104
RED R102 0R05 1/16WR0402 PC_R_IN
3
2
1
U111
1 6 VGA_SDA C0402
I/O3 I/O2
I/O4 I/O1
VDDGND
2 I/O1 I/O4 5 R109 C105 C106
BLU 3 GNDVDD 4 VGA_SCL U112 75R NC NC
I/O2 I/O3 AZC399-04S
RED_GND
AZC399-04S
4
5
6
RX
VGA_HIN
VGA_VCC
VGA_VCC
BLU_GND
Near to IC VGA_SCL
VGA_SDA
3.3V
C110
NC
120R/600mA U113
5
FB101
R114
1 2 VGA_HSY N_IN 2 4 HSY NC_ABU
PC_HS_IN R130
1K 1/10W 5VSB 5VSB
C111 VGA_5V
3
1
R115 C112 NC/SN74LVC1G17DBVR NC 22P 50V 0R05 1/16W
2.2K 22P 50V R0402 D103
4K7 1/16W 5%
4K7 1/16W 5%
R134 0R05 1/10W BAV70
VGA_HSY N_IN HSY NC_ABU
VGA_VCC
3
3.3V
C116
CAT24C02WI-GT3 220N16V R123
C113 R135 0R05 1/10W R0402
R0402 4K7 1/16W 5%
NC VGA_VIN_AB VSY NC_ABU U115 R0402
120R/600mA U114 1 8
R121
R122
A0 VCC
5
FB102 2 7
R116 3 A1 WP 6 R126 33R R0402 VGA_SCL
1 2 VGA_VIN_AB 2 4 VSY NC_ABU 4 A2 SCL 5 R127 33R R0402 VGA_SDA
PC_VS_IN VSS SDA
1K 1/10W C123 C124
NC
R117 C114
3
R131
CN102 3 VGA_AUR_O R119 0R05 1/10W R120 0.05R PC_RIN
VPORT0603100KV05
VPORT0603100KV05
D0603 D0603
CONN
88A302-51S R128 R129
100K 1/10W 100K 1/10W C122
470PF
C121
470PF
1
1
D104
D105
Meridian 4 25
Remark: Parts position can be searched by using FIND function in PDF.
5V
1
NC/22 OHM 1/16W
R172
NC/300 OHM
C160
NC/100N 50V R173
NC/1K 1/16W
GND
NC/1.2K 1/10W
Q151 R174
NC/100N 50V NC/PMBS3904 SPDIF_OUT
C162
C161
SPDIF_OUT_AR NC
R175 R176
NC/180 OHM NC/1K 1/16W
GND
3.3V
Y/Pb/Pr
1
FB603 SPDIF OUT
0R05 1/16W R0402 0R05 1/16W R0402 NC/120R/3000mA
R164 R165
PR
PR1_IN CN603
2
2
R601
SPDIF_OUT SPDIF_OUT_AR 3
SPDIF_OUT VIN
R163 C151 C153 2
D151 75R NC NC 1 VCC
NC/100R 1/16W 5% GND
PR_GND
NC/CONNNECTOR
1
VPORT0603100KV05
2
D0603
A/I? = NC
C601 C602 C603
GND D603 NC/10uF 6.3V NC/100N 50V
R602 NC/22pF 50V
NC
1
0R05 1/16W R0402 0R05 1/16W R0402 NC/VPORT0603100KV05
R166 R167 D0603
PB
PB1_IN
2
R168 C155 C156 SPDIF_Mute
SPDIF_Mute
75R NC NC
D152 GND
SPDIF OUT
PB_GND
1 CN605
1
VPORT0603100KV05 C623
D0603 GND 100N 16V R622
CN111 SPDIF_OUT
5
2
C 0R05 1/16W R0402 0R05 1/16W R0402 100 OHM 1/10W
6 R169 R170 C624 2
Y 33P 50V
Y 1_IN
2
1
D158 75R NC NC VPORT0603100KV05
1 D0603
A Y _GND GND GND
1
2 VPORT0603100KV05 GND
D0603
GND R161 NC/0.05R CVBS1_IN
2
CONN
1
A NC/VPORT0603100KV05
1 CVBS2_GND D0603
GND
4 AV2L R151 NC/10K 1/10W AV1_LIN
2
New B
3
part 6 AV2R D156
R152 NC/10K 1/10W AV1_RIN
2
C
5 R154 R153
1
NC/VPORT0603100KV05 R156 R155 NC/10K 1/10W NC/10K 1/10W
CN116 D157 D0603 NC NC
2 NC/JACK
A R157 0R05 1/10W
1
VPORT0603100KV05
VPORT0603100KV05
1 NC/VPORT0603100KV05
HD_LIN
R158 0R05 1/10W R/A D0603
4
HD_RIN H=10.5mm
B
3 A:Yello,
B:White,
2
R159 R160
CONN R188 R189 NC/10K 1/10W NC/10K 1/10W C:RED Near to IC
88A78-13-57C C188 C189
NC/470P 50V NC/470P 50V
D153
D154
1
D0603 D0603
Near to IC
FB601
LINE OUT
AUDIO OUTPUT IMPETANCE MAX = 1K
C604 NC/2.2uF 10V
1 2 AUD_LOUT
C0603
NC/VPORT0603100KV05
NC/VPORT0603100KV05
NC/30R/700mA
R606 R605 L0603 R621 1 CN604
2
NC/33K 1/16W 5% NC/100K 1/16W 5%
C619 2
NC/100P 50V
NC/220 OHM +-5 1/16W R0402 R0402 C0402
R0402
D601
D602
3
1
3VSB 3VSB R607 NC/CONN
D0603 D0603 88A302-51S
220 OHM +-5 1/16W FB602 180Deg H=8.5
R620 R603 R0402 C609 NC/2.2uF 10V
1 2 AUD_ROUT GreenA/I? = NC
NC/47K 1/16W 5%NC/47K 1/16W 5% C0603
3.3V NC/30R/700mA
R614 L0603 R615
R0402 R0402 NC/33K 1/16W 5% NC/100K 1/16W 5%
C611
R0402 NC/100P 50V
Q601 R604 NC/33R 1/10W 5% R0402 C0402
NC/PDTC114Y T
SXL_LO_L R608 Q602 R0603
SXL_LO_L NC/100R 1/16W 5% LINEO_MUTE
R0402 LINEO_MUTE NC/PDTC114Y T
U604
SXL_LO_R R611 1 14
SXL_LO_R NC/100R 1/16W 5% 2 +INR +INL 13
-INR -INL
NC/22K 1/16W 5%
NC/22K 1/16W 5%
NC/2N2 50V
NC/2N2 50V
C612NC/150pF 50V
C613NC/150pF 50V
R0402 R0402 7 8
C0402 C0402 R0402 CN CP
C614
R617
C615
C616
C0402 EC63
C0402 C620 NC/1UF 10V C607
R0402 R0402 C0402
C0402 C0402 C0402
5VSB 1 2 HDMI0_5VIN
NC/M24C02-WMN6TP Q505
FB501
HDMI0_DDC_SCL NC/2N7002
U501 DDC0_SCL
HDMI0_HPD NC/BAT54C
3
HDMI0_5VIN 1 8 1 2 R508 NC/4.7K 1/10W
2 A0 VCC 7 R507 NC/4.7K 1/16W
3 A1 WP 6 NC/120R/600mA
HDMI0_5VIN
HDMI INPUT 0 4 A2 SCL
VSS SDA
5
HDMI0_5VIN
Q506
CN501 R509 HDMI0_DDC_SDA NC/2N7002
I2C Address: 1010 000x DDC0_SDA
NC 5VSB
26 21
25 SHELL7 SHELL2 20 pin 7: WC# ,Low enable to write, and internal pull
SHELL6 SHELL1 19 low. R510
HP DET 18 NC/1K 1/16W HDMI0_RXC- 1 10
+5V IN1 OUT1 HDMI0_RXC-
17 HDMI0_RXC+ 2 9
GND IN2 OUT2 HDMI0_RXC+
16 HDMI0_SDA R512 NC/0R05 OHMHDMI0_DDC_SDA R511 NC/4.7K 1/10W R514
DDC DATA 15 HDMI0_SCL R513 NC/0R05 OHMHDMI0_DDC_SCL NC/ 10K+-5%1/16W HDMI0_RX0- 4 7
GND
GND
DDC CLK IN3 OUT3 HDMI0_RX0-
14 HEAC+ C501 NC/100N 16V R516 NC/4.7K 1/10W HDMI0_HPD HDMI0_RX0+ 5 6
NC HDMI_HEAC+ IN4 OUT4 HDMI0_RX0+
13 HDMI0_CEC R515 NC/0R05 OHM
CE Remote HDMI_CEC
12 HDMI0_RXC-
24 CK- 11 C502 U502 NC/RClamp0524P.TCT
NC/VPORT0603100KV05
3
SHELL5 CK Shield 10 HDMI0_RXC+ R518 NC/10K+-5%1/16W
CK+ 9 HDMI0_RX0- NC/220N16V Q501
D0- RX0_HOTPLUG
8 NC/PMBS3904
D0 Shield 7 HDMI0_RX0+ R517
D0+ 6 HDMI0_RX1-
D1- 5 NC/100OHM1/16W
D1 Shield
2
4 HDMI0_RX1+
D1+ 3 HDMI0_RX2- D503
23 D2- 2
22 SHELL4 D2 Shield 1 HDMI0_RX2+
SHELL3 D2+ HDMI0_CEC 1 10 HDMI0_CEC HDMI0_RX1- 1 10
IN1 OUT1 IN1 OUT1 HDMI0_RX1-
HDMI0_SCL 2 9 HDMI0_SCL HDMI0_RX1+ 2 9
IN2 OUT2 IN2 OUT2 HDMI0_RX1+
1
GND
GND
GND
GND
IN3 OUT3 IN3 OUT3 HDMI0_RX2-
88A340-21A HDMI0_5VIN 5 6 HDMI0_5VIN HDMI0_RX2+ 5 6
IN4 OUT4 IN4 OUT4 HDMI0_RX2+
3
3.3V
5VSB
R526 4.7K 1/10W
D502
5VSB
1 2 HDMI1_5VIN
NC/M24C02-WMN6TP Q507
FB502
HDMI1_DDC_SCL 2N7002
U504 DDC1_SCL
HDMI1_HPD BAT54C
3
HDMI1_5VIN 1 8 1 2 R520 4.7K 1/10W
2 A0 VCC 7 R519 NC/4.7K 1/16W
HDMI INPUT 1 3
4
A1 WP
A2 SCL
6
5
120R/600mA HDMI1_5VIN
HDMI1_5VIN
VSS SDA Q508
CN502 R521 HDMI1_DDC_SDA 2N7002
I2C Address: 1010 000x 5VSB DDC1_SDA
NC
26 21
25 SHELL7 SHELL2 20
SHELL6 SHELL1 19 R522 HDMI1_RXC- 1 10
HP DET IN1 OUT1 HDMI1_RXC-
18 1K 1/16W HDMI1_RXC+ 2 9
+5V IN2 OUT2 HDMI1_RXC+
17
GND 16 HDMI1_SDA R523 0R05 OHM HDMI1_DDC_SDA R524 4.7K 1/10W R501 HDMI1_RX0- 4 7
GND
GND
DDC DATA IN3 OUT3 HDMI1_RX0-
15 HDMI1_SCL R525 0R05 OHM HDMI1_DDC_SCL R503 NC/ 10K+-5%1/16W HDMI1_RX0+ 5 6
DDC CLK IN4 OUT4 HDMI1_RX0+
14 HEAC+ 4.7K 1/10W HDMI1_HPD
NC 13 HDMI1_CEC R502 NC/0R05 OHM
CE Remote HDMI_CEC
12 HDMI1_RXC- U505 RClamp0524P.TCT
3
24 CK- 11 C503
SHELL5 CK Shield 10 HDMI1_RXC+ R504 10K+-5%1/16W
CK+ 9 HDMI1_RX0- 220N16V Q502
D0- RX1_HOTPLUG
8 PMBS3904
D0 Shield 7 HDMI1_RX0+ R505
D0+ 6 HDMI1_RX1-
D1- 5 100OHM1/16W
D1 Shield 4 HDMI1_RX1+
D1+ 3 HDMI1_RX2-
23 D2- 2
22 SHELL4 D2 Shield 1 HDMI1_RX2+
SHELL3 D2+
HDMI1_RX1- 1 10
IN1 OUT1 HDMI1_RX1-
HDMI1_CEC 1 10 HDMI1_CEC HDMI1_RX1+ 2 9
IN1 OUT1 IN2 OUT2 HDMI1_RX1+
HDMI HDMI1_SCL 2 9 HDMI1_SCL
88A340-21A IN2 OUT2 HDMI1_RX2- 4 7
GND
GND
IN3 OUT3 HDMI1_RX2-
HDMI1_SDA 4 7 HDMI1_SDA HDMI1_RX2+ 5 6
GND
GND
IN3 OUT3 IN4 OUT4 HDMI1_RX2+
HDMI1_5VIN 5 6 HDMI1_5VIN
IN4 OUT4
U506 RClamp0524P.TCT
3
U514 RClamp0524P.TCT
8
Vertical
Meridian 4 27
Remark: Parts position can be searched by using FIND function in PDF.
HDMI Input 2 (Side) 5VSB
3.3V
1 2 HDMI2_5VIN
NC/M24C02-WMN6TP Q552
FB551
BAT54C HDMI2_DDC_SCL 2N7002
3
U507 DDC2_SCL
HDMI2_HPD
HDMI2_5VIN 1 8 1 2 R553 4.7K 1/10W
2 A0 VCC 7 R552 NC/4.7K 1/16W
3 A1 WP 6 120R/600mA HDMI2_5VIN
A2 SCL HDMI2_5VIN
4 5
HDMI INPUT 2 VSS SDA
R554 HDMI2_DDC_SDA
Q553
2N7002
I2C Address: 1010 000x DDC2_SDA
HDMI NC 5VSB
21
SHLD1 19 R555
23 HPD 18 1K 1/16W HDMI2_RXC- 1 10
SHLD3 VCC5 IN1 OUT1 HDMI2_RXC-
17 HDMI2_RXC+ 2 9
DDC_GND IN2 OUT2 HDMI2_RXC+
16 HDMI2_SDA R556 0R05 OHM HDMI2_DDC_SDA R557 4.7K 1/10W R559
SDA 15 HDMI2_SCL R558 0R05 OHM HDMI2_DDC_SCL R561 NC/ 10K+-5%1/16W HDMI2_RX0- 4 7
GND
GND
SCL IN3 OUT3 HDMI2_RX0-
14 4.7K 1/10W HDMI2_HPD HDMI2_RX0+ 5 6
NC IN4 OUT4 HDMI2_RX0+
13 HDMI2_CEC R560 NC/0R05 OHM
CEC HDMI_CEC
12 HDMI2_RXC-
TMDSC- 11 C551 U509 RClamp0524P.TCT
3
CSHLD0 10 HDMI2_RXC+ R562 10K+-5%1/16W
TMDSC+ 9 HDMI2_RX0- 220N16V Q551
TMDSD0- RX2_HOTPLUG
8 PMBS3904
DSHLD2 7 HDMI2_RX0+ R563
TMDSD0+ 6 HDMI2_RX1-
TMDSD1- 5 100OHM1/16W HDMI2_RX1- 1 10
DSHLD1 IN1 OUT1 HDMI2_RX1-
4 HDMI2_RX1+ HDMI2_RX1+ 2 9
TMDSD1+ IN2 OUT2 HDMI2_RX1+
3 HDMI2_RX2-
22 TMDSD2- 2 HDMI2_RX2- 4 7
GND
GND
SHLD2 DSHLD0 IN3 OUT3 HDMI2_RX2-
1 HDMI2_RX2+ HDMI2_RX2+ 5 6
TMDSD2+ IN4 OUT4 HDMI2_RX2+
20 HDMI2_CEC 1 10 HDMI2_CEC
SHLD0 HDMI2_SCL 2 IN1 OUT1 9 HDMI2_SCL
IN2 OUT2 U510 RClamp0524P.TCT
3
HDMI2_SDA 4 7 HDMI2_SDA
GND
GND
CN506 HDMI2_5VIN 5 IN3 OUT3 6 HDMI2_5VIN
IN4 OUT4
U515 RClamp0524P.TCT
3
Horizontal
28 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
Demodulator +3.3VD
+3.3VD
R1070 R1071
4.7K 4.7K
R1053 R1054
Crystal is 16MHZ 10K+-5%1/16W 10K+-5%1/16W
TNSCL U101-1
TSCL R1055 10K+-5%1/16W 1 61 SRCK_ORR R1079 0R05 OHM
TSMDO SRCK TS1_CLK
TNSDA R1080 33 OHM 1/16W TS1_D0
TSDA R1056 NC 2 60 SRDT_ORR R1081 0R05 OHM
XSEL1 SRDT TS1_SY NC
R1082 0R05 OHM TS1_DEN
R1057 NC 3 59 SBY TE_ORR
XSEL0 SBYTE
58 PBVAL_ORR 5 4 TS1_D1
PBVAL TS1_D2 TS1_D[0..7]
I2C address is 0x30 R1058 10K+-5%1/16W 6 3
SLADRS1 7 2 TS1_D3
5 8 1 TS1_D4
R1059 10K+-5%1/16W SLADRS1 RP1051
1K 1/10W SLADRS0 6 R1060 33 OHM +-5% 1/16W
R1052 SLADRS0 55 0R05 OHM 5 4
R1061 10K+-5%1/16W 7 RSEORF STSFLG1_ORR 6 3 TS1_D5
D_IF_AGC AGC1 SLADRS0 TS1_D6
54 7 2
C1057 R1062 10K+-5%1/16W 8 RLOCK SLADRS1 8 1 TS1_D7
C1054 100N16V S_INFO 53 RERR_ORR RP1052
100N16V AGCCNTI R1063 20K OHM 1/16W91% RERR 33 OHM +-5% 1/16W
AGCCNTI 52 SLOCK_ORR
D_RF_AGC AGCCNTR R1064 NC/20K OHM 1/16W101% FLOCK
AGCCNTR 51 STSFLG0_ORR
R1051 C1056 R1065 10K+-5%1/16W11 STSFLG0 +3.3VD
C1053 NC/1K 1/10W NC/100N 16V CKI
NC/100N 16V
TNSCL 12
TNSCL R1066 R1067
TNSDA 14 4.7K 4.7K
TNSDA
XT_O 18 46 R1068 100OHM1/16W
XT_O XO SDA SDA_Demod
45 R1069 100OHM1/16W
XT_I SCL SCL_Demod
19
1M 1/10W XT_I XI
R1078
+3.3VD
C1055 1.5nF 50V 21
R1077 FIL
1.2K 1/10W
C1089
X1051
C1058 100N 16V 24 100N 16V
1 2 AD_VREFP R1072
C1059 100N 16V 25 10K 1/10W
AV_VREFN 100OHM1/16W
C1062 100N 16V 26 R1074 1 4
C1051 C1052 AD_VREF 42 2 GND VCC 3
18pF 50V 18pF 50V SYRSTN RESET MR Reset_demo#
C1063 100N 16V 27
ADQ_AIN 41 R1075 10K+-5%1/16W
C1064 100N 16V 28 TSMD1
ADQ_AIP U163
40 R1073 4.7K 1/16W +3.3VD C1060 G692L293TCUf 2.91V
29 DTMB 10N 50V
D_IFN ADI_AIN
DTCLK
39 R1076 10K+-5%1/16W MR has internal pull-up with 20K
30 38 STSFLG1_ORR
D_IFP ADI_AIP STSFLG1
TC90517FG
HP_VCC_25 V_2.5VD
FB730
120R/3000mA
L0603 U708 SOT223GOI
G912T63U
1
120mA Max
10uF 6.3V
3 2
VI VO
10uF 6.3V
10uF 6.3V
100N 16V
For demodulator
C0402
GND
C715
C717
C758
C709
C0603
C711 C712
1
13
12 TH4 3.3V_TUNER
11 TH3
10 TH2
TH1
CLK_OUT
FB1002
ANT-DC
TU102
IF_AGC
IF_N
GND
IF_P
VCC
SDA
SCL
1 2
FB1001
5V_TUNER 5V_TUNER
FB1003
1 2
3.3V_TUNER 1 2
IF_CTL
IF_CTRL
TU2_AIF
TU2_DIF+
C1006 3.3V
T_IFAGC
NC
AIF & DIF switch
C1007 R1024
6.8K
NC U1001 R1015
TS5A3157DCKR 0R05 OHM
IF_CTL 6 1
IN NO 2 A_IF_AGC
5
R1010
R1012
R1014
COM NC D_IF_AGC
NC/0R05 1/16W C1012
R1025 100N 16V R1007 22N 25V
0R05 1/16W 0R05 OHM
0R05 1/16W 0R05 1/16W C1023 Tuner_SDA NC/ 10K+-5%1/16W
Tuner_SCL TSDA
18pF 50V C1024
18pF 50V TSCL
R1026
0R05 OHM
C1005
TU2_AIF
D_IFN
L ON OFF
C1008
TU2_DIF+
H OFF ON
D_IFP
100N 16V
Close to demod
L1002 C1003
0.56uH A_IFN
C1029
10PF 50V C1022 C1027
L1001 NC/10PF 50V C1004 NC/4P7 50V
0.56uH A_IFP
100N 16V
Close to Tuner
Close to U401 (SXL)
30 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
SXL_4/5_AV_InOut_PanelUsbLan
U401A TSXL28-B1A10-H
AE23
SCK I2S_OUT_CLK
R4240 NC AD23
J26 Digital_ WS AF23
I2S_OUT_LR
VDAC_OUT SD1 I2S_OUT_DATA
G25 AE24
CVBS1_IN
C4207 NC/100N 25V G26 CVBS Audio_Out SD2 AD22 R4218 0R05 OHM
H22 CVBS2 SPDIF_O AF24 SPDIF_OUT
CVBS3 I2SCLK AUD_CLK
H23
CVBS4
D26
PC_G_IN Y _G1
F26 P23 Only MAIN_OL/R intergated
PC_B_IN PB_B1 MAIN_OL HP_LOUT
E26 N25
PC_R_IN PR_R1 MAIN_OR HP_ROUT headphone Amp
D25 N26
Y 1_IN Y _G2 SUBO
C4202 100N 25V F25 R4243 NC
ASXL Analog
PB1_IN PB_B2
C4203 100N 25V E25 K23
PR1_IN PR_R2 SPK_AOR1
C4204 100N 25V R4244 NC
C26 K24
F24 Y _G3 Audio SPK_AOL1
E24 PB_B3 Analog_ K25 R4241 0.05R
PR_R3
27x27 Out AOR2 SXL_LO_R
D24 Video_In K26 R4242 0.05R
Y _G4 AOL2 SXL_LO_L
Layout Close to U401 F23
E23 PB_B4
PR_R4
(4/8) Analog CVBS_OUT1
J24
G24
CHROMA J25
Video CVBS_OUT2
J23
H25 FS1 Out
FB1 N22 R4221 14.3K 1%
AR1 PC_RIN
N23 R4222 14.3K 1% C4200 4.7UF 10V PC_LIN
H24 AL1 M25 R4223 14.3K 1% C4201 4.7UF 10V
FS2 AR2 AV1_RIN
H26 M26 R4224 14.3K 1% C4209 4.7UF 10V
FB2 Analog_ AL2 M22 R4225 14.3K 1% C4208 4.7UF 10V
AV1_LIN
AR3 M23 R4226 14.3K 1%
Audio_In AL3 L25 R4227 14.3K 1% HD_RIN
AR4 L26 R4228 14.3K 1% C4206 4.7UF 10V
AL4 HD_LIN
L22 R4219 14.3K 1% C4205 4.7UF 10V
AR5 L23 R4220 14.3K 1%
AL5
Layout Close to U401
U401C TSXL28-B1A10-H
C19 B4
HDMI0_RX0- RX0D0N TA1N TX0AN
C18 A4
HDMI0_RX0+
A18 RX0D0P I2C TA1P C4 TX0AP
HDMI0_RX1- RX0D1N TB1N TX1AN
B18 C5
HDMI0_RX1+ RX0D1P TB1P TX1AP
B17 A5
HDMI0_RX2- RX0D2N TC1N TX2AN
A17 B5
HDMI0_RX2+ RX0D2P TC1P TX2AP
B19 B6
HDMI0_RXC- RX0CN TCLK1N TXCKAN
A19 A6
HDMI0_RXC+ RX0CP TCLK1P TXCKAP
A16 C6
HDMI1_RX0- RX1D0N TD1N TX3AN
B16 C7
HDMI1_RX0+ RX1D0P TD1P TX3AP
B15 A7
HDMI1_RX1- RX1D1N TE1N TX4AN
A15 B7
HDMI1_RX1+ RX1D1P TE1P TX4AP
C15
HDMI1_RX2-
C14 RX1D2N LVDS B8
HDMI1_RX2+ RX1D2P TA2N TX0BN
C17 A8
HDMI1_RXC-
C16 RX1CN OUT TA2P C8 TX0BP
HDMI1_RXC+ RX1CP TB2N TX1BN
B13 C9
HDMI2_RX0- RX2D0N TB2P TX1BP
A13 A9
HDMI2_RX0+ RX2D0P TC2N TX2BN
C13 B9
HDMI2_RX1- RX2D1N TC2P TX2BP
C12 B10
HDMI2_RX1+ RX2D1P TCLK2N TXCKBN
A12 A10
HDMI2_RX2- RX2D2N TCLK2P TXCKBP
B12 C10
HDMI2_RX2+ RX2D2P TD2N TX3BN
A14 C11
HDMI2_RXC- RX2CN TD2P TX3BP
B14 A11
HDMI2_RXC+ RX2CP TE2N TX4BN
B21 B11
ASXL
A21 RX3D0N TE2P TX4BP
C21 RX3D0P
C20 RX3D1N AF20
A20 RX3D1P DP AE20 USB_DP
B20 RX3D2N USB DN AA19 USB_DN
A22
B22
RX3D2P
RX3CN HDMI 27x27 Port
USBPPON
AD20 R4229 43.2 OHM 1%
USB_PPON
RX3CP TXRTUNE
IN
DDC0_SDA
DDC0_SCL
DDC1_SDA
R4230
R4231
R4232
0R05
0R05
0R05
OHM A23
OHMC24
OHMC22
DSDA0
DSCL0
DSDA1
(5/8) EN_RXD0
EN_RXD1
AF17
AD18 EN_RXD0
EN_RXD1
R4233 0R05 OHMC23
DDC1_SCL DSCL1
R4234 0R05 OHM E21 AC19
DDC2_SDA DSDA2 EN_TXD0 EN_TXD0
R4235 0R05 OHMD21 AD19
DDC2_SCL DSCL2 EN_TXD1 EN_TXD1
A24
B25 DSDA3 Ethernet AE19
DSCL3 EN_MDC AB19 EN_MDC
R4236 10K+-5%1/16W B24 EN_TXEN AE18 EN_TXEN
HDMI0_5VIN PWR5V0 EN_MDIO EN_MDIO
AE17
R4237 10K+-5%1/16W B23 EN_CRS_DV AF19 EN_CRS_DV
HDMI1_5VIN PWR5V1 EN_REFCLK EN_REFCLK
AF18
R4238 10K+-5%1/16W D22 EN_RX_ER EN_RX_ER
HDMI2_5VIN PWR5V2 R4245 NC 0R05 1/10W
PANEL_PWM_IN
A25 B3
PWR5V3 H_BK_LITE A3 PWM0 R4239 NC/0R05 OHM
PWM0 A2 PWM1 R4217 0R05 1/10W
PWM1 BRT_CTRL
10N 50V 10N 50V 10N 50V B2 R4204 NC/0R05 OHM
C4212 C4213 C4214 PANEL BOOST B1 R4205 0R05 OHM
BKLGON BL_ON/OFF
R4201 C1
TCON_ON PANEL_ON
NC 27K 1/16W 5% R4202 R4203
NC 27K 1/16W 5% NC 27K 1/16W 5%
AD25 R4206 33 OHM 1/16W
TCK JTAG_TCK
AD26 R4207 33 OHM 1/16W
TMS JTAG_TMS
0R05 OHM AE25 R4208 33 OHM 1/16W
R4209 ARCD_O D20 EJTAG TDO AE26 R4210 33 OHM 1/16W
JTAG_TDO
HDMI_HEAC+ HEAC TDI JTAG_TDI
0R05 OHM AD24 R4211 33 OHM 1/16W
TRSTN JTAG_RSTN
R4212 E19
F19 FSOURCE
10K+-5%1/16W FSOURCE D3 R4213 0R05 OHM
R4214 RREF E20 UART RXD D2 R4215 0R05 OHM
HP_RXD
REXT TXD HP_TXD
_Port
Meridian 4 31
Remark: Parts position can be searched by using FIND function in PDF.
SXL_6_Flash_CI_GPIO
3.3V TSXL28-B1A10-H
U401B
3.3V R4283
AE3 AE1 NC/4.7K 1/10W
AD4 FRD0/PODD0 POD_A7 AD2
AF4 FRD1/PODD1 POD_A8 AD1
AC5 FRD2/PODD2 POD_A9 R4281
R4278 4.7K 1/10W AE5 FRD3/PODD3 AC11 10K 1/10W R4267 4.7K 1/10W
R4279 4.7K 1/10W AB6 FRD4/PODD4 POD_IREQ AA12 10K 1/10W R4268
AD6 FRD5/PODD5 POD_RST AF11 10K 1/10W R4269 R4282
MEMC_SCL AF6 FRD6/PODD6 POD_VS1 AD11 4.7K 1/10W
MEMC_SDA AD3 FRD7/PODD7 POD POD_WAIT AB13 10K 1/10W R4280
AE4 FRD8/PODA0 POD_DIR 10K 1/16W 5%R4271
AB5 FRD9/PODA1 AB12 MEMC5V_SW
AD5 FRD10/PODA2 POD_CE1 AC12 V105_SW
AF5 FRD11/PODA3 POD_CE2 AE11 V105DLL_SW
AC6 FRD12/PODA10 POD_CD1 AF12 MEMC5V1_Enable#
AE6 FRD13/PODA11 POD_CD2
AC7 FRD14/PODA12 AD12 IF_CTRL AMP_SD
FRD15/PODA13 POD_VCC_EN AE12 RESET_FRC I2S_MUTEB#
ASXL
POD_VPP_EN
AD8 AF25
FRA0 FRA0/FAD0 HPD HPH_DETECT
AB11
AA11 FRA1/PODWE D13 R4251 0R05 OHM
AF10
AE10
FRA2/PODIORD
FRA3/PODIOWR 27x27 GPIO0
GPIO1
E13
F13
R4252
R4275
0R05 OHM
0R05 OHM
I2S_MUTEB#
RESET_FRC
AE8 FRA4/PODREG FLASH GPIO2 D12 R4253 0R05 OHM
DRC_EN
FRA5
FRA6
FRA7
FRA8
AF8
AA9
AB9
FRA5/FAD1
FRA6/FAD2
FRA7/FAD3
FRA8/FAD4
/POD (6/8) GPIO_ GPIO3
GPIO4
GPIO5
GPIO6
E12
F12
C2
R4254
R4264
R4265
0R05 OHM
0R05 OHM
0R05 OHM
Reset_demo#
GP4
AMP_SD
IF_CTRL
AD10 C3 R4255 0R05 OHM
FRA9/PODOE GPIO7 USB_OC
AC9 D1 R4256 0R05 OHM
FRA10
AD9 FRA10/FAD5 PORT GPIO8 AD21 R4257 0R05 OHM
MEMC5V_SW
FRA11 FRA11/FAD6 GPIO9 V105_SW
AE9 AF21 R4258 0R05 OHM
FRA12 FRA13 FRA12/FAD7 GPIO10 V105DLL_SW
AF9 AE21 R4259 NC/0R05 OHM
NAND_CLE FRA14 FRA13/CLE/FAD8 GPIO11
AA10 AF22 R4266 NC/0R05 OHM
NAND_ALE FRA15 FRA14/ALE/FAD9 GPIO12 MEMC5V1_Enable#
AB10 AE22 R4272 NC/0R05 OHM
FRA13 FRA15/FAD10/PODA14 GPIO13 AE2 R4273 NC/0R05 OHM
FRA13 FRA14 POD_A4/GPIO14 AF2 R4274 NC/0R05 OHM
FRA14 FRA15 POD_A5/GPIO15
FRA15
AB8
F_OE FOE#
AC8 C25
F_WE FWE# SCLM1 SCL_Demod
B26
AB7 SDAM1 F5 R4260 33 OHM 1/16W SDA_Demod
F_CE
AD7 BOOTCS I2C SCLM2 F4 R4261 33 OHM 1/16W
MEMC_SCL
FCE2# SDAM2 MEMC_SDA
AF7 D4 R4262 NC/33 OHM 1/16W
AA8 FINT1 SCLM3 E4 R4263 NC/33 OHM 1/16W
AE7 FINT2 SDAM3
AF3 FCLK
AC10 FAVD/POD_A6 E5
F_RDY FRDY MASTSEL MASTSEL
AC20
SDIO_CLK
32 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
U401D TSXL28-B1A10-H
SXL_7_TS_STB_MCU_SPI_Flash TS1_D[0..7]
TS1_D0
TS1_D1
AC13
TS1_D0 TS2_D0
AD15
AD13 AE15
TS1_D2 AE13 TS1_D1 TS2_D1 AF15
TS1_D3 AF13 TS1_D2 TS2_D2 AB16
TS1_D4 AB14 TS1_D3 TS2_D3 AC16
TS1_D5 AC14 TS1_D4 TS2_D4 AD16
TS1_D6 AD14 TS1_D5 Parallel_ Parallel_ TS2_D5 AE16 TS2_D6 R4306 NC/0R05 OHM
TS1_D7 AE14 TS1_D6 TS2_D6 AF16 TS2_D7 R4307 NC/0R05 OHM
TS1_D7 TS In TS Out TS2_D7
AF14 AB17 R4301 NC/0R05 OHM
TS1_CLK TS1_CLK TS2_CLK
AC15 AD17 R4304 NC/0R05 OHM
TS1_SY NC TS1_SYNC TS2_SY NC
AB15 AC17 R4305 NC/0R05 OHM
TS1_DEN TS1_DEN TS2_DEN
ASXL
R23 C4313 100N 16V
PDQ_IO
R26 R25
A_IFN INN TAGCO_IF A_IF_AGC
IF_In DRX R24 R4338
P26 TAGCO_RF 1K 1/16W
A_IFP INP AC26 R4246 NC
27x27 DGPIO1
DGPIO2
AC25 R4247 NC
STB_JTAG_TDI
STB_JTAG_TMS
STB_JTAG_TCK
STB_GP0
STB_GP1
STB_GP2
V23
V24
V25
STB_GP0
STB_GP1
STB_GP2
(7/8) Reset RSTN
AA25
C4301
SXL_RESET#
3VSB
AUX_POWER_ON#
STB_MCU_TXD
AA21
Y21
STB_GP10
STB_TXD
STB_MCU SF_SCK
STB_MCU_RXD STB_RXD
U23 AC22
DDC0_SDA STB_SDA TESTCON SX_TESTCON
U24 Config AC23
DDC0_SCL STB_SCL TESTMOD SX_TESTMOD
AA22
STB_EN STB_EN
R4311 STB_IO
NC/47K 1/16W AA23 C4302 20pF
STB_JTAG_TDO AA24 LED
IR_D IR
R4313 0R05 OHM V21 T22
RX2_HOTPLUG KY BRD XTLI24M
Q4301 R4314 100OHM1/16W V22 R4315
SPDIF_Mute LGSEN
R4316 NC/100OHM1/16W NC/2N7002 U26 Xtal NC/1M 1/16W X4301
HDMI_CEC CEC
R4317 100OHM1/16W U25 24MHz C4303 20pF
SXL_PWRON PWRON
R4337 NC/4.7K 1/16W T21
3VSB XTLO24M 0R05 1/16W
R4319 NC 0R05 OHM U22 R4318 FB4303
Lightsensor R4320 0R05 OHM U21 AVLINK1 3VSB
PHY RST# AVLINK2 W21 1 2
AVDD33_STB 120 OHM
3.3V Analog
T26 ST B P ower C4304
PC_VS_IN PCVS
T25 T18 100N 16V
PC_HS_IN PCHS AVSS_STB FB4304
R4340 0R05 OHMY24
RESET_Samp# STB_RSTO R21 1 2 3VSB
R4321 0R05 OHMY22 VDD33_XTAL
RX0_HOTPLUG HP_DETECT 3.3V power_
for DRX P LL C4305 C4306 120 OHM
R4322 NC/0R05 OHM
Y23 T23 100N 16V 10uF 6.3V
PS_ON MUTE VSSA_XTAL
2
FB4302
120R/600mA
R4324 R4325
4.7K 1/16W 4.7K 1/16W
1
V_3.3_Flash FB4301 3.3V
1 2
120R/600mA R4323 R4326
U405 4.7K 1/16W 4.7K 1/16W
4M bit Serial Flash
C4307 C4308 R4327 R4328 R4329 1 48
10uF 6.3V 100N 16V 4.7K 1/16W 4.7K 1/16W 4.7K 1/16W 2 NC1 NC29 47
3 NC2 NC28 46 U406
4 NC3 NC27 45 SF_CS 1 8
5 NC4 NC26 44 FRA12 SF_SO R4330 33R 2 CS# VCC 7
6 NC5 I/O7 43 FRA11 FRA12 SF_WP# R4331 33R 3 SO HOLD# 6
F_RDY 7 NC6 I/O6 42 FRA10 FRA11 4 W# SCK 5
F_RDY RY/BY1 I/O5 FRA10 GND SI
F_OE 8 41 FRA8
F_OE RE I/O4 FRA8
F_CE 9 40 MX25L4005AM2C-12G
R4332 10 CE1 NC25 39 V_3.3_Flash
0R05 OHM V_3.3_Flash 11 NC7 NC24 38
C4310 NC8 NC23 C4311
12 37 C4309
13 VCC1 VCC2 36 220N16V
14 VSS1 VSS2 35
100N 16V 15 NC9 NC22 34
NAND_CLE 16 NC10 NC21 33 100N 16V
NAND_CLE CLE NC20
NAND_ALE 17 32 FRA7 SF_SI R4333 33R
NAND_ALE ALE I/O3 FRA7
F_WE 18 31 FRA6
F_WE WE I/O2 FRA6
19 30 FRA5 SF_SCK R4334 33R
20 WP I/O1 29 FRA0 FRA5
21 NC11 I/O0 28 FRA0 SF_HOLD#R4336 33R
22 NC12 NC19 27
23 NC13 NC18 26
R4335 24 NC14 NC17 25
NC NC15 NC16
K9F1G08U0C-PCB0
SXL_8_DDR3 MD0
MD1
E3
E2 MMDQ0 MMA0
M2
R4
MA0
MA1
HP_VCC_15 HP_VCC_15
ASXL
MD16 U2 MMDQ15 MMBA0 R3 BA1
MD17 U3 MMDQ16 MMBA1 N4 BA2
MD18 U4 MMDQ17 MMBA2
MD19 U5 MMDQ18 P2 CAS#
MD20 V4 MMDQ19 MMCAS# HP_VDDM
MD21
MD22
V5
W1
MMDQ20
MMDQ21 27x27 MMRAS#
P3 RAS# DDR3-1 De-cap
MD23 W2 MMDQ22 N2 WE#
MD24
MD25
MD26
W3
Y1
Y2
MMDQ23
MMDQ24
MMDQ25
MMDQ26
(8/8) MMWE#
MMCKE
P4 CKE
+ C4394
47uF 16V
C4395
10uF 6.3V
C4396
10uF 10V
C4397
100N 16V
C4398
100N 16V
C4399
100N 16V
C4400
100N 16V
C4401 C4351 C4352
10N 50V
C4354
10N 50V
MD27 Y3 N3 ODT
MD28
MD29
AB1
AB2
MMDQ27
MMDQ28
DDR3 INTERFACE MMODT
N1 MCLK0
MD30 AB3 MMDQ29 MMCKP
MD31 AC1 MMDQ30 P1 MCLK0# HP_VDDM HP_VDDM
MMDQ31 MMCKN
DDR3-1 De-cap DDR3-2 De-cap
DQM0 G1 L5 MMRST#
DQM1 K5 MMDM0 MMRESETN
DQM2 V3 MMDM1 T5 R4355 240 OHM +-1% 1/16W C4355 C4356 C4357 C4358 C4359 C4360 C4361 C4362 C4363 C4364 C4365 C4366
DQM3 AA3 MMDM2 MZQ
MMDM3 100N 16V 100N 16V 100N 16V 10N 50V 10N 50V 10N 50V 100N 16V 100N 16V 100N 16V 10N 50V 10N 50V 10N 50V
DQS0 F1 K6 MVREF0
DQS#0 F2 MMDQS0P MMVREF0 V6 MVREF1
DQS1 J2 MMDQS0N MMVREF1
DQS#1 J1 MMDQS1P
DQS2 V1 MMDQS1N HP_VDDM
DQS#2 V2 MMDQS2P L6
MMDQS2N MMDIG_TEST0 DDR3-2 De-cap
DQS3 AA1 T6
DQS#3 AA2 MMDQS3P MMDIG_TEST1 U6
MMDQS3N MMANA_TEST + C4367 C4368 C4369 C4370 C4371 C4372 C4373 C4374 C4375 C4376 C4377 C4378
47uF 16V 10uF 6.3V 10uF 6.3V 100N 16V 100N 16V 100N 16V 100N 16V 10N 50V 10N 50V 10N 50V 10N 50V 10N 50V
HP_VDDM HP_VDDM
HP_VDDM HP_VDDM
R4356 R4357
H9
H2
D2
C9
C1
R9
R1
N9
N1
G7
D9
H9
H2
D2
C9
C1
R9
R1
N9
N1
G7
D9
F1
E9
A8
A1
K8
K2
B2
F1
E9
A8
A1
K8
K2
B2
U402 U403 1KOHM +-1% 1/16W C4379 NC/1KOHM +-1% 1/16WC4380
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
N3 MA0 N3 MA0 100N 16V NC/100N 16V
A0 P7 MA1 A0 P7 MA1 DDR_MVREF21 DDR_MVREF22
A1 P3 MA2 A1 P3 MA2
DDR_MVREF21 H1 A2 N2 MA3 DDR_MVREF22 H1 A2 N2 MA3 R4358 C4381 R4359 C4382
DDR_MVREF21 M8 VREF_DQ A3 P8 MA4 DDR_MVREF22 M8 VREF_DQ A3 P8 MA4 1KOHM +-1% 1/16W NC/1KOHM +-1% 1/16W
VREF_CA A4 P2 MA5 VREF_CA A4 P2 MA5 100N 16V NC/100N 16V
MD3 E3 A5 R8 MA6 MD27 E3 A5 R8 MA6
MD7 F7 DQL0 A6 R2 MA7 MD29 F7 DQL0 A6 R2 MA7
MD0 F2 DQL1 A7 T8 MA8 MD26 F2 DQL1 A7 T8 MA8
MD4 F8 DQL2 A8 R3 MA9 MD28 F8 DQL2 A8 R3 MA9
MD1 H3 DQL3 A9 L7 MA10 MD24 H3 DQL3 A9 L7 MA10
MD6 H8 DQL4 A10/AP R7 MA11 MD31 H8 DQL4 A10/AP R7 MA11
MD2 G2 DQL5 A11 N7 MA12 MD25 G2 DQL5 A11 N7 MA12 MCLK0
MD5 H7 DQL6 A12/BC T3 MA13 MD30 H7 DQL6 A12/BC T3 MA13
MD13 D7 DQL7 NT5CB64M16DP-CF NC T7 MA14 MD21 D7 DQL7 NC/NT5CB64M16DP-CF NC T7 MA14 R4360
MD8 C3 DQU0 NC_A14 M7 MD16 C3 DQU0 NC_A14 M7
MD14 C8 DQU1 NC_A15 MD20 C8 DQU1 NC_A15 75R
MD9 C2 DQU2 M2 BA0 MD19 C2 DQU2 M2 BA0
MD11 A7 DQU3 BA0 N8 BA1 MD22 A7 DQU3 BA0 N8 BA1
MD10 A2 DQU4 BA1 M3 BA2 MD18 A2 DQU4 BA1 M3 BA2 R4361 C4383
MD15 B8 DQU5 BA2 MD23 B8 DQU5 BA2
MD12 A3 DQU6 J7 MCLK0 MD17 A3 DQU6 J7 MCLK0 75R 10N 50V
DQU7 CK K7 MCLK0# DQU7 CK K7 MCLK0# MCLK0#
DQS0 F3 CK DQS3 F3 CK
C4384 C4385 DQS#0 G3 LDQS K9 CKE C4386 C4387 DQS#3 G3 LDQS K9 CKE
LDQS CKE LDQS CKE
100N 16V 100N 16V DQS1 C7 L2 NC/100N 16V
NC/100N 16V DQS2 C7 L2
DQS#1 B7 UDQS CS DQS#2 B7 UDQS CS
UDQS J3 RAS# UDQS J3 RAS#
DQM0 E7 RAS K3 CAS# DQM3 E7 RAS K3 CAS#
DQM1 D3 LDM CAS L3 WE# DQM2 D3 LDM CAS L3 WE#
UDM WE UDM WE
ODT K1 T2 MMRST# ODT K1 T2 MMRST#
ODT RST L8 ODT RST L8
ZQ ZQ
NC = J1,J9,L1,L9 R4362 NC = J1,J9,L1,L9 R4363
240 OHM +-1% 1/16W NC/240 OHM +-1% 1/16W
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
G9
G1
F9
E8
E2
D8
D1
B9
B1
T9
T1
P9
P1
M9
M1
J8
J2
G8
E1
B3
A9
G9
G1
F9
E8
E2
D8
D1
B9
B1
T9
T1
P9
P1
M9
M1
J8
J2
G8
E1
B3
A9
34 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
LVDS Interface
5VSB
12V
NC/300 OHM
FB4150
12V 1 2
43
NC/220 OHM 1/10W NC/100N 50V 0.22uF 50V CN408
Q4151 2 1 SELLVDS
PANEL_ON TX0AP TX0AN
PMBS3904 TX1AP 4 3 TX1AN
R4162 TX2AP 6 5 TX2AN
4.7K 1/10W 8 7 R4155
TXCKAP 10 9 TXCKAN NC
R4160 12 11
4.7K 1/10W TX3AP 14 13 TX3AN
TX4AP 16 15 TX4AN
PANEL POWER 3.3V 18 17
TX0BP 20 19 TX0BN
1:ON ; TX1BP 22 21 TX1BN
0:OFF TX2BP 24 23 TX2BN
R4152 26 25
NC/4.7K 1/10W TXCKBP 28 27 TXCKBN
30 29
TX3BP 32 31 TX3BN
TX4BP 34 33 TX4BN
36 35 SELLVDS 3.3V
PANEL_VCC 38 37
40 39 PANEL_VCC
R801 42 41
BRT_CTRL
R4156 R800
330 OHM 1/4W R4157
PANEL_PWM_IN
NC 0R05 1/10W CONN NC/0R05 1/10W 330 OHM 1/4W
44
R4151
NC/4.7K 1/10W
R4153
DRC_EN
R4158
NC
NC/0R05 1/10W
Meridian 4 35
Remark: Parts position can be searched by using FIND function in PDF.
AMP24V
Audio_Speaker_AMP/Headphone VCC33_AMP
R688
R6003 47uH NC 3.4KOHM +-1% 1/10W
L651
10K 1/10W
AMP24V AMP24V
Woofer
NC CONN
24V
1
3.3V
FB651 FB652 D653
2
L0603 L0805
C6002 + AMP24V AMP24V
+ C6005 C6006 C6007 C6008 C6009 C6010 C651 C654
C6004 C6011 10uF 10V 100N 50V 330UF 35V 1uF 50V 1uF 50V 100N 50V 100N 50V R6006 + +
47uF 16V 100N 50V C0805 C0603 10x9mm C1206 C1206 C0603 C0603 12V AMP24V 5VSB NC 100UF 35V NC 100UF 35V
10K 1/10W 100uF 35V NC 100UF 35V C693 C694 C695 C696
+ + + +
R6007
D654 LL4148 PD_MUTE NC 100UF 35V NC 100UF 35V
R6002 R6005 R6009 LSPK- RSPK-
51K 1/10W
NC NC 680OHM +-5% 1/10W R661 C697 C698 C699 C6001
+ + + +
U605 22KOHM 1/10W
NC 100UF 35V NC 100UF 35V
100N 50V
1K 1/10W
HP_LOUT_AC
VPORT0603100KV05
VPORT0603100KV05
2
2
D651
D652
1
D0603 D0603
36 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
Ethernet PHY 3.3V
FB7001
3.3V_PHY
1 2
3.3V_PHY NC/120R/3000mA
L0603
FB7002
2 1
NC/120R/600mA
R7001
NC/10K Pull-up Resistors should close to PHY chip ( <400 mil )
CN703
NC/couplier assembly
NC/10uF 6.3VNC/100N 16V C7006 C7007 C7008
C7001 C7002 NC/100N 16V NC/100N 16V
NC/10uF 6.3V
17
C7009 C7005 R7002 R7003 R7004 R7005 R7018
R7007 NC/100N 16V NC/1uF 10V NC/49.9R 1% NC/49.9R 1% NC/49.9R 1% NC/49.9R 1% NC/0.05R LED1_ANODE 15
TH2
LED1_CATHODE 14 G+ P15
19
G- P14
9
6
NC/1.5K 1/16W
U711 NC/LAN8720A LED2_ANODE 13
LED2_CATHODE 12 Y + P13
VDDIO
VDD1A
VDD2A
VDDCR
17 21 LAN_TX+ 11 Y - P12
EN_TXD0 TXD0 TXP NC P11
18 10
EN_TXD1 TXD1 NC P10
20 LAN_TX- PIN_2 9
R7008 NC/100R 8 TXN PIN_3 8 NC P9
EN_RXD0 RXD0/MODE0 NC P8
R7009 NC/100R 7 PIN_4 7
EN_RXD1 RXD1/MODE1 NC P7
23 LAN_RX+ PIN_5 PIN_16 6
16 RXP PIN_5 5 RCT P6
EN_TXEN TXEN RD- P5
22 LAN_RX- PIN_4 4
13 RXN PIN_3 3 RD+ P4
EN_MDC MDC TD- P3
PIN_2 2
TD+ P2
TH1
12 PIN_16 PIN_16 1
EN_MDIO MDIO TCT P1
14 R7010 C7013 C7014 C7015 C7016 C7017
15 nINT/REFCLKO NC/0R05 OHM GP4 NC/10pF 50V NC/10pF 50V NC/10pF 50V NC/10pF 50V NC/22NF25V
PHY RST# nRST
16
R7011 NC/100R 10
EN_RX_ER RXER/PHY AD0 2 LED2/nINTSEL
LED2/nINTSEL
EN_CRS_DV
11
CRS_DV/MODE2 ET_LED1---> LINK/Activity --> Green
3 LED1/REGOFF Common mode caps should close to transformer ( <400 mil ) R7020 NC/0.05R
5 LED1/REGOFF ET_LED2---> Speed --> Yellow
EN_REFCLK XTAL1/CLKIN NC
4 24
XTAL2 RBIAS
VSS
R7012
NC/12.1K 1%
R7017 R7013
LED2_ANODE LED2_CATHODE LED2/nINTSEL
3.3V_PHY
NC/0.05R NC/300R
R7019 R7014
LED1/REGOFF LED1_ANODE LED1_CATHODE
NC/0.05R NC/300R
Meridian 4 37
Remark: Parts position can be searched by using FIND function in PDF.
USB
USB_5V
MEMC_5V1
FB1101
1 2
120R/3000mA
L0603
USB_5V
R1105 MEMC_5V1
NC/0R051/8W 12V
220UF 16V
TH1101 C1111
PTCR 120R/3000mA
FB1103 L1102
t
2
1 2 10uH 4A C1110
2 1 D1101 + 100N 16V R1108
SJPW-T4VL C1112 120K 1/10W 1%
C1104 G5655P12U 62K
10U 16V 10uF 10V
1
U110 U1101 R1110
5 1 C1101 + R1102 2 3
100uF 35V
IN OUT 2 C1103 C1102 R1104 M5VSW 7 IN LX 2KOHM 1% 1/10W
4.7UF
GND NC/1K 1/10W EN
4 3 NC/10U 10V NC/100N 16V NC/10K 1/10W 100UF 16V 1 5
USB_PPON EN OC NC FB
SMD/0402 C1108 6 8
NC/G5250M1T1U C1107 + COMP SS 4
R1101 R1103 GND
NC/4.7K1/16W NC/4.7K1/16W C1109 C1105
SMD/0402 SMD/0402 1UF16V R1109
NC 22uF 10V C1106 27K 1/10W 1%
1 2 5V 180P 50V 24K
3.3V FB1102
120R/3000mAL0603
USB_OC
R1106 R1111
USB CONN 10K 1/10W 0R05 1/10W
CN103
5
M5VSW
1 NC/1K 1/10W
3 L1101
1 2 3 4
USB_DP
2 2
3
R1107 85%@3.3V 62K/24K
MEMC5V1_Enable#
4 1 4
USB_DN
Q1101
vout= 0.92*(1+(R179+R180)/R181))=5.07V
90 ohm NC/PMBS3904
6
ACM-2012
2
2
1
ZD1101 ZD1102
NC/PESD0603-240 NC/PESD0603-240
D0603 D0603
38 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
Debug Interface
UART_VDD
UART_VDD
3.3V 3VSB
EJTAG(Core MIPS) R4125 0.05R
3.3V R4122 NC
NC/CONN
1K 1/16W NC/CONN
NC 1K 1/16W NC 1K 1/16W
NC 1K 1/16W NC 1K 1/16W A/I? = NC
UART Port for MIPS UART Port for STB MCU
3VSB
R4114
NC/4.7K 1/16W R4118 SW4100
NC/CONN 10K 1/10W 2 5 4
9 10 STB_JTAG_TCK R4115 1 4
7 8 STB_JTAG_TDO 2 GND VCC 3
SXL_RESET# RESET MR 1 NC/SW 3
5 6 STB_JTAG_TMS
3 4 100OHM1/16W
1 2 STB_JTAG_TDI C4100 U4100
G692L293TCUf 2.91V
10N 50V A/I? = NC
R4119
CN406 R4116 R4117 NC/ 10K 1/10W MR has internal pull-up with 20K
NC/1K 1/16W NC/1K 1/16W
A/I? = NC
R4130 0.05R
STB_JTAG_TDI STB_JTAG_TDI STB_JTAG_TDO
KEY _VOL_CH STB_JTAG_TDI STB_JTAG_TDO
R4131 0.05R
STB_JTAG_TMS
KEY _PW_SU_MENU
R4132 0.05R
STB_JTAG_TDO
LED_R
R4133 NC/0.05R
STB_JTAG_TCK STB_JTAG_TCK
LED_B STB_JTAG_TCK
STB_JTAG_TMS
STB_JTAG_TMS
Meridian 4 39
6.2 Power Board
221TE4L 715G4313P03000003S
Remark: Parts position can be searched by using FIND function in PDF.
R901
100 OHM 1/4W C901
R902
! 100 OHM 1/4W
FB902
T901 R903 1N 500V
100 OHM 1/4W Coil
POWER X''FMR L901
1 2 5 8 R965
! BEAD
9 100 OHM 1/4W +16V
2
BD901 R9 04 R905 4
KBP208GL 100K 1/4W 100 K 1 /4W
C944 3 10 D901
! !
3
10NF1KV + + R906 1 11 MBRF20200CT + C904
- + C908 470UF 35V
4 1 C902
FB903
C903 3.3K 1/4W C905 + C930 + C906 + C907
47uF 450V 47uF 450V 0.001uF/1KV R907 R908 2 470UF 35V 470UF 35V
470UF 35V 100N 50V
100K 1/4W 100 K 1 /4W
1 2 2 12
C943
BEAD
1
10NF1KV R909
3
3.3K 1/4W
C946
D902 D903 Coil
MBRF20150CT
3
NC PR1007 L902
NC R9 10
!
C909
0.1UF !
C910
R911
3.3K 1/4W
R938 D904 2.2 OHM 1/4W 2
+5.2V
0.001uF/250V 0.001uF/250V
! + C911 +
C913
1
Q901 470uF 10V C912
AOT8N65 C914 470uF 16V 100N 50V
2N2 500V
R912 R913
L905
3 2 IC901 22 OHM 1/8W 10K 1/8W
1 8
CT HV
2 7 R914
! 3 COMPNC
CS VCC
6 10 0 OHM 1/4W
CN902
4 1 4 5
C915 GND OUT D905
30MH 47NF 50V LD7576AGR + C942 + !
RECTIFIER DIODE FR107 R91 5 ON/OFF
1
4 3 C917 C916 100 OHM 1 /4W R916 DIM
2
22UF 35V C918 3
100N 50V 22UF 35V R917 220R 1/8W 5% 1N 50V 4
NC 0R43 5% 2W 5
1 2 R96 4 6
100 OHM 1 /4W 7
L903 !
C919
8
9
R918 ! +16V
10
C920 470OHM +-5% 1/8W IC902 +5.2V
11
0.47UF 1nF50V 56G 139 3A 12
PC1 23X2YFZOF 13
! ! !
R92 0 R92 1 R922
1
620K 1/4W 620K 1/4W 620 K 1 /4W R9 19
C921 3K3 +-5 % 1/8W R92 3 CONN
22N 25V 43 K 1/8W 1%
2 1
LED2 LED1
2
4 3
R9 24 LED4 LED3
6 5
! 60V 60V
2
3K 9 1 /8W 1% 8 7
t
NR901! FB904
! LED6
LED8
10 9
LED5
LED7
C92 2 C9 23
NTCR
47 0pF/250V 4 70pF/250 V C924
1 2 2 20nF5 0V CN904
NC
BEAD
1
! !
C925 C926 R925
2K 1/8W 5% LED10
2 1
LED9
4 3
LED12 LED11
NC NC 6 5
60V 60V
8 7
! +16V KIA431A-AT /P
LED16
LED14
10 9
LED13
LED15
F902 F901 56G 158 12
FUSE FUSE IC903 R926
84G 5 6 3 B 84G 56 3 B 2K43 1/8W 1% CN903
2
NC
ZD902
MTZJ T-72 18B
1
R999
680 OHM 3W R998
0 OHM +-5% 1/8W
2
1
CN901
L
N
CONN
Q919
2SD1623S-TD-E
R9100
C945 1K 1/8W
100N 50V
40 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
+16V
L904 60V
C927 + + C929
IC904 100N 50V C928 47UF 35V 100UH
RT8482GS 330UF 35V D906
1 2 1 2
1 16
GATE2 GBIAS GND 15 VCC FB901 R987
GATE VCC
5
6
7
8
3 14 OVP BEAD B3100B C932 13K 1/6W
SS ISW 4 NC OVP 13 Q902 C931 82UF 100V
D
D
D
D
C933 5 ISW EN 12 + + ISP R927 R928 R929 CN906
NC NC TPCA8009-H 7A 150V
2
470NF 25V ISP 6 11 SS NC NC NC
ISP SS
2
C934 ISN 7 10 R930
ISN DCTL
G
S
S
S
100N 50V VC 8 9 ACTL R933 C935 82UF 100V C936 150 OHM 1/8W 1
VC ACTL LED14
1
R932 GATE 100V 0.1UF Z Y5V NC 2
LED12
4
3
2
1
1
6.2K 1/8W ISN 3
60V
R931 4R7 +-5% 1/8W 4
ON/OFF 60V
150K 1/8W 5% 5
ISW LED6
R934 6
LED2
30K 1/8W 1%
1
C938 C937
4N7 50V 100N 50V ISP OVP CONN
R935
2
10KOHM +-5% 1/8W ISN
R937
R936 1K 1/8W 1%
1K 1/8W R939
C939 0.05R CN905
1N 50V
1
2
LED14
3
LED2
4
60V
DC/DC Converter NC
Compensation circuit NC
LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
ZD901
MTZJ T-72 15B
1
ON/OFF
R971
100KOHM +-5% 1/8W R972 R973 R974 R975 R976 R977 R978 R979
R981
Q918 10KOHM +-5% 1/8W
2N3904
R984
10KOHM +-5% 1/8W R985
100KOHM +-5% 1/8W C941
100N 50V
10ohm +/-1% 1/8W
FB901
3 2 ! BEAD T901
080GL19P N1
R937 47 OHM 1/4W
1 2 1 POWER X'FMR
L903 +16V
-
D901
2
C902 + + C931 R905 R903 R904 10 3.5uH 16V/1.45A
3
56UF 450V 1NF2KV 6.8K 1/4W 100K 100K 2 FMX-12SL ZD902
4
1
R907 3 8 C907 C908 C909
R906 100K 4 330UF 35V
330UF 35V
330UF 35V
1
100K Q903 R933
3 L902 2 R908 510OHM +-5% 1/8W
6.8K 1/4W 6 2SD1623S-TD-E
R929 D902 5
NC PR1007 JUMP
4 1 D903
3
30MH R909 ! MBR30L60CT
6.8K 1/4W 2
1N4148
! L904 +5V
2
D904 3.5uH C911 5V/3.5A
R930 Q901 C910 470uF 5A/250V
1
NC R924 R910 C925 1000UF 10V
1 1 OHM 1/4W 2N2 500V + C937 +
STP10NK70ZFP
R911 22 OHM 1/4W 100N 50V R934
IC901
3
22 OHM 1/4W R912 C929 1K 1/8W 1%
C914 ! 1
2 OTP HV
COMP
8 10K OH M
D905 R913 C913
JR90 1
MAX0R05
100N 50V
47 OHM 1/4W
NR901
NTCR 470 OHM 1/8W
10 OHM C922 C938
t 47 0PF 5 0V IC902 33nF 50V
! EL817M(X)
2
4 1
! ! R923
10K 1/8W 1%
470R 1/8W 1%
F901
FUSE
JUMP
C918 ! C923
100N 50V
470pF/250V
!
R926
2K 1/8W 1%
2 1 KIA431A-AT/P
056G 158 12 R927
CN901 IC903 9.1KOHM +-1% 1/8W
SOCKET
HS4 HS1
HEAT SINK(Q901) HS3 HEAT SINK(D901)
HEAT SINK(D903) CN902
1
3
1
CN903 2 1 2
NC/CONN 2 1
DIM
2
ON/OFF
3
3D EN 4
5
+16V 6
7
HS2 8
GND1 NC/HEAT SINK 9
GND 10
+5V
1 11
1 2 12
2
筿甧郎
NC
42 Meridian 4
Remark: Parts position can be searched by using FIND function in PDF.
N.C
ZD801 Vout
B3100B
+16V R846 0R01
FB802 LED1 LED2
L801 47UH C818
1 2
220N 50V LED2 LED3
BEAD
C820 + C819 R848 0R01
220N 50V C804 LED3 LED4
C801 4.7UF 100V 220N 50V
Q801
8
0.1uF 50V APM1105NUC-TRG C821 R829 1R 1%
220N 50V LED4 6
LED3 5
4 CN802
Vout 3 NC/CONN
LED2 2
R803 LED1 1
2.2R
R826 1R 1%
7
IC801
R807
3R 9 1/10W 5% R813 10K
D801 1 24
PWM STATUS
1N4148-B4006
EMI LED1 2
3 ISEN1 NC
23
22
R845 C814 LED2 4 ISEN2 SSTCMP 21 CN804
300 OH M 1/4W 680n F 50V R804 5 ISEN3 COMP 20 R812
C815 C805
20K 1/10W 6 ISEN4 SEL 19 0.33uF 16V 0.47uF 16V 1
ON/OFF GNDA VIN
LED3 7 18 100R 1/10W 5% 2
8 ISEN8 GNDP 17 3
DIM R801 R802 LED4 9 ISEN6 VREF 16 R810 4
ISEN7 LDR
JUMP / 0.3R 1/4W
0.3R 1/4W OVP1
10
11 OVP ISEN5
15
14 JR805 1K 1/10W 5%
5
ISET ISW
3D EN EMI JR808
MAX0R 05 R805 270K +-1% 1/8W
12
RT ENA
13 C806
0.47UF 50V
MAX0R 05
CONN
JR804
R806 MAX0R 05
10K OZ9998AGN C807
2.2U16V
R809
100K
R814
10R
+ C813
100uF 50V
Vout
R822
1M 1/8W 5%
OVP1
C812
37mm
44 Meridian 4
6.4 Key Board (715G5205K01000004S)
Remark: Parts position can be searched by using FIND function in PDF.
SW01
VOL+ ~0.925V
TACT SW FWRD H1.5MM
R01
VOL- ~0.606V
TACT SW FWRD H1.5MM
R02
CN02
4
1 PWR-SW
CH+ ~0.313V
2 FUNC_KEY TACT SW FWRD H1.5MM
3
R03
CONN
2KOHM 1% 1/10W SW04
5
SW05
MENU ~0.925V
TACT SW FWRD H1.5MM
R05
GND
GND1
Source Select ~0.606V
1 TACT SW FWRD H1.5MM
R04
2.4K 1/10W
R6
NC
77T 607 2 FD
Meridian 4 45
7. PCB Layout
7.1 Scaler Board (715G4786M01000005K)
Remark: Parts position can be searched by using FIND function in PDF.
SCREW6
CN701 FB705
Q701
C701
CN704 CN702
R4165 FB4150
FB708
R712 R701
R4166
C4153
R4163 R4150
C4396
FB710
U765
C719
C710
R710
R711
R708
R702
R704
FB4151
SCREW2
SCREW3
FB727 R4164
SEN2 C4150
R4268
R4269
R4280
R713 R709 C4394 C4367
R715 C706 R4161
C726
FB714
FB715
C4401
FB712
Q4151
FB709
D4151
Q703
C713
FB740
R707
R706
C720
FB706
R4159 SEN7
R4362
R716
R714 R4162
FB741
R717
R791 C716 R4160 Q4150
FB729
C714 U703
R4360 C4383
C721
C4371
FB7001
R7001
R4361
C7001
R4356
C7002
C727 Q704 C731 C736 R724 R723 C705 R4358
R4363
U402
R4040
R4002
R4025
R4011
R4035
R4030
R4046
R4043
C729 C733
R726 C704 U403 C4381
C4379
C702
FB718
C728 C4152
C735
R4039
R4001
R4024
R4010
R4034
R4029
R4045
R4042
C7007
R7003 C7006
C744
C745
C751 C732
C7008
FB7002
C734 U706
R7002
R7005
R7004
R719 C703
R728
C739
C4151
C7014
C7013
C7016
C7015
R725
D701
CN408
U702
C738
D401 R403
D402 R406
C737
R7017 R7021
C707 FB719
U405 C4011 HS1
L701 C4010
R7018 R7013
FB728
FB401 FB724 R4274
R407
C402
FB402
R410
ZD408
ZD407
ZD406
C7017
R4157
CN401 CN703
R7014 R7019
R4282
R4281
R4019
ZD401
ZD402
R4131
R409
C401
C723
FB711 C722
R401
U705 U704
R4114
R4116
R4117
R4283
R4130 R7020
R553
R4212
Q553
R4132
C6002 R4258 R4257 R4229
R4214
CN406 R4133
R4266 R4272 R4259
R4341
R551
Q552
R4218
R4121
R4226
R4225
R4318
C4301 R4315 C4212 R558
R4322 R4201 R556
R4340
C4303
C4302
CN405 R555
R4223
R4224
R4228
R4227
C435
C436
C107
C102
C104
R4236
C4207
C4202
C4203
C4204
R511
R516
Q551
R154 C4209
R153 C4208
C4205
C4206
R110
R106
R108
R421
R422
R4317
R6006 R6007 R661
R170
R167
R165
R602
X4301
D654 R4337
D653
R517
R518
R514
R512
R513
R515
R562
C655
R663
C109
C103
C106
R731
U605
R4221
R4222
C159
C156
C153
R559
R730
R6009
C1027
C1026
FB726
R4242
R4241
R732
Q501
R563
R510
R4209
C6005
R6005
C6006
R6002
FB651
C6011
C748
U513 U502 U503
C747
R169
R166
R164
C4200
C4201
R520
C1003
C1004
C746
R680
R152
R151
U701 Q508
R6003 C6014
R672
C674
C675
CN501
D157
Q652
R6008
R6004
R676
R674
R652
R651
C677
C672
R6000 C4101
C686
R526
R4119
U4100
C670
C6004
R666
R662
R664
R4115
C4100
R699
R156
Q507
C689 C667 C659
RP1051
RP1052
R4118 SW4100
R1079
R1080
R1081
R1082
R1060
C715
C717
FB1056
R505
C758
R671 R665
R501
R523
R525
R502
R1056
R1055
R524
R503
Q653
FB730
C711
R504
C712
U504
C1082
C615
R616
R611
R608
R617
C616
C1083
Q502
R1054 R1057
R522
U514 U505 U506
R667
R669
C709
U602 R1053 R1058
R1066
R1068
U708 R604 C503
R612
R609
R1059 C610 C608
R1069 FB502
R1061
R1067
R1074 R1072
C613 C612 C501 D503
R521
CN121
C621
C622
R613
R619
R618
R610
D502
R1062
CN502 R519
D156
FB151
R1075
C1056 C1057
R1064 R1063
C160
HS602 R1052 U101 R1073 C1060
C618 C617 C607
R120
R125
U163
R1076
C1054
R155
C680
C1089
C668
C1081
R173
R172
R1051
C161
R174
R1065
U604
C623
C1053 C122 C121
R176
C606
R607
R1071 Q151
R606
C6009 C6010 C605 R129 R128
U114 U113
R1070
R622
C6008 C6007 R175 C110
C162
R119
R124
R103
R105
R601
R102
R109
C105
C609 C604
R104
R111
C108
R1077
R1078
R614
R605
C1071
FB602
FB601
FB102
D155
C1066
C1058
R126
FB1052 R623 R114
C611
R615
R621
C619
C1062
C1064
C1005
C1008
R131 R122
U112
R117
C624
U111
C113
C111
C601
C684 R675 C6012 R690 D104 D105 R123
R101
R107
C101
C1055 R127 C114 R162
C1051
C1052
R116
R161
C115
L654 L653 L652 L651 C1028
C1029
L1002
L1001
C1021
C1022
CN604 CN102
CN603
R1012
CN101
R1008
C682 C6013
R695 C685 C679
CN657 C661 C691
C1002
ZD1101
C1001
C1013
R1102 FB1102
R1007
R696
CN658
C664
TU102 C602
FB1002
FB1003 U1001
C1006
R694
FB603
C662 C658
C1101
R1024
R1015
C1012
CN111
C1024 C1023
C742 R1025
R1101
CN116
U110
C6001 C699 R1026 R1103
R1104
C1016
C743
FB721
FB720
C1103
C1102
C1025
TH1101
C1010
FB731 R1105
U707
CN601 C698 C696 C1104 CN602
D651
R653
R1014 R1010
R1109 R1108
C1106
R1111
R1106
FB1101
C1112
C1105
C741
C1110
D652
R758
C653
R1110
C1111
FB1001
C1109
R658
R4124 R4107
R4127 R4105
R4126 R4108
R4123 R4106
FB1103
FB732 C652
R4125
R4122
Q651 SEN8
C1009
D1101
SCREW4
SCREW1
C1107
C693 C694 SCREW5
C1108
46 Meridian 4
SEN14
R7010
R7007
R7011
R7008
R7009
SEN13
C7005
U711
R7012 C7009
R554
R552
U507
R135
R134
FB551
C551
SEN3
C112
R115
C151 FB101 R4154
R800
R163
R4151 R801
D151
R4156 R4155
R4245
R4153
R4152
R4158
Q505 Q506
U501
C502
R4203
R4238
R4231
R4233
R4232
R4234
R4235
C4214
R4255
R4215
R4213
R4262
R4263
R4217
D501
R4205
R4265
R4271
D152
C123
R4275
R4264
R4251
R4252
R4254
R4253
R168 FB425
R4204
R4260
C155
C124
C116 FB435
FB433
FB434
R4261
D103
R4033
R4256
R4032
R130
C4026
C4354
C4355
C456
C429
C4375 C4372
C4368
C455
FB427
C4359
C451
C4374
C4036 C4034
C4377
C4376
C430
U115
C4006
C440
C460 FB437
C4030 C4384
C4039 C4353
C431
C4024
FB421
C4031
C4014
C4013
R4240
C4005
C4022
C421
C423
C4023
R4316
R4311
FB423
C4032
C4029
C4037
C4040
C4033
C4038
C464
FB439
C158
C465
C4021
C434
C4025
C422
FB430 C446
C445
C426
C4391
R4353
C4388
R4351
FB426
FB422
R4220
C444
C4390
R4219 C438 C425
C437
C4305
C448
C449
C424
C4306
C4015
FB432 C447
FB424
C4012
C4312
C428
C4017
C427
R4355
C443 FB429
R4338 C4313
FB4304
FB4303
C4392
C4393
R4354
R4352
C4389
C4044
C4043
C4042
C4008
C4002
R4312
C4004
C4045 C4398 C4386
C4016
C4007
C4018
C4019
C4020
C4362
R4301
C458 C4001 C4003
C463
C453
C4400
C441 C459
C189
FB438
C4360
C4366
C4397
C4399
R160 R158
R4246 C452
C4387
C462
C442
R189
R4306
D154
R4020
R4310 R4307
C4395
Q601 Q602
R4319 C4380
R4320
R4308 R4305
R603
R620
R4314
R4304
R4006
R4313
R4005
R4038
R4335 R4004 R4044
R4037
R4328 R4014 R4047
R4273
C188
Q1101
R4036
R4321
R4023
R4022
R4016 R4018
C4310 R4017
C4311
R1107 C4308
R4332 R4012
R4329
R188
R159 R157 D153
C4307 R4026
R4327 R4007
FB4301 R4003
R4008
Remark: Parts position can be searched by using FIND function in PDF.
R4041
R4009
R4267
R4278
R4279
R4336
FB4302
R4334
R4326
R4333 R4330
R4331 C768
C4309
R4325
R802
C767
FB1059
R727 R738
FB1053 C1073 R703 Q706
C1065
C1067
R736
R737
FB1051
FB1054
C1069
R739
U406
C1072
C1076
FB1055
C1078
FB1057
R4323
R4324
Q702
C1079 C1074
C1080 C1084
C1085 C1086
C1075 C1068
C1087
C1077
C1070
FB1058
C1061
C1088
R734
R735 R729
R670
C660
C657
R689
C692
R673
C669 C663
C666
R677 R668
C681 R247 R720
R721
R718
Q705
C678
R682 R722
Q210
R233
C690
SEN11
Q402
C688
R408
R402
R405
R404
Q401
SEN12
C916 CN906
J918
IC903
J903
J920
GND2
GND3
C930
C942 CN904 CN903
7.2 Power Board
IC902 CN905
J923
C923
J919
D905
D908
D904
Q906 Q925 D936
D924
D901
D920
J922
D926
C906
Q908 Q927 D922
C932
T902
HS3
D910
D938
T901
D907
HS1
D937
Q901
J921
Q905 Q926
D923
D921
D925
D902
Q907 Q924 D919
D909
C907
D935
C931
D911
R917 Q909 Q922 D933
D927
C905
D917
D929
221TE4L (715G4313P03000003S)
L901
D931
D914
D903
Q912 Q921 D932
FB902
D930
D916
HS2
D928
R987
FB903
D912
C903 C902
J924 D934
FB901
C943 BD901
J917
IC905 Q917
C944 C922 J916
L904
C904
NR901
C919
Q903
FB904
J910
L902
J907
J911
Q904
J906
J913
L903
F902
J901
F901
C946
C925
L905
C929 Q913
ZD902
J905
C928
R999 Q918
C912 J908
J912
C909
CN901
ZD901
CN902
C926
C910
J904 J914 GND4
GND1
Remark: Parts position can be searched by using FIND function in PDF.
R932
C945
Q919
R984
C918
SEN5
R998
R9100
R937
C927
C937
R935
C934
C908
R971
R981
C913 R947
R944
R946
R963
R985
C941
R941
R934
R952
IC904
R936
R933
R940
JR902
R922
Q928
R961
C933
C939
C936
R931
R921
R945
C940
R951
R920
R930
C938
JR901
Q902
R950
R948
R986
Q914
R958 R975
R911 R909 R906 R916
R907 R904
R9104 R955 R976 R9111
R929
R918
R913
R927
C901
R9107 R954 R977 R9114
R903
R901
R902
R965
R912
R938
R910
C917
IC901
R924
R919
C924
R925
R923
SEN3
C915
C921
C920
JR904 JR903
R926
Meridian 4
47
48 Meridian 4
231TE4L (715G3973P01W22003M)
Remark: Parts position can be searched by using FIND function in PDF.
PIN23
R935 J908
Q903
J802
R933
ZD902
L903
J903
C929 C808
C821
D901 C908
R817
C820
J904
JR808
CN801
J810
FB802
HS1 D903 C910 C924 C926
C937
HS3
C925
J907
CN902
C901 R845 C814 R804
HS5 C907
C913 R914
R937
R842
R927
J814
J803 R806
C927
R805
C806
R814
R913 C936
J906 L904 R902 C807
R815
J808 R938
IC903
J815 R901
R923
R926
IC801
FB801 C911 R922
C923
R921
JR804
JR805 R808 R829
JR901 R810
R915 R848
R844
C801 C815 C805
J806
R828
J807
J805
J822
J821
IC902
R812
R827
R847
C935
J823
J804
R809
F902
R830
C811
C938
R936
R813 R846
C813 T901
R826
R801 R824
C812
R802
C819
L802 Q801
C919
J801
R807 R803
C818
R822
D801
C810
CN802
C933
CN804
R910
D905
HS6
R924
D902
J809 HS4 J909
C917
C804
C906 C916 C921 C934 R906 R903
IC901 R907 R904
R920
R919
C922
R911
D904
C915
R929 R928
ZD802 ZD801
R931
C918
J902
FB906 PIN31
R930 R905
R909 R908
FB901
FB904
C931
C932
FB902 F901 CN903
R918
C902A CN901
C914
C903
BD901
R917
L901
C903A L902
R916
HS2
C920
NR901
PIN24
C902
GND1
Meridian 4 49
231TE4L (715G4033P01001004S)
Remark: Parts position can be searched by using FIND function in PDF.
CN2
CN11
CN3
CN1
50 Meridian 4
7.3 IR Board (715G5061R02002004M)
R002
LED1
CN01
U001
R001
C001
SW1
GND1
CN02
SW06
SW05
SW04
SW03
SW02
SW01
SW12
SW11
SW2
Meridian 4 51
8. Wiring Diagram
Panel
CN704
CN401 Scaler
CN902 CN408
Scaler Board
Key Board
Power Board
CN802
CN901
CN601
SPK L SPK R
Panel IR Board
52 Meridian 4
9. Scaler Board Overview
DDR
Scaler
Flash
Side AV
LVDS
HDMI
SPDIF
TV ANTENNA
VGA
AUDIO AV INPUT
Meridian 4 53
10. Mechanical Instructions
Take 231TE4L disassembly for example
Carefully place the TV monitor face down on a smooth surface. Be careful to avoid scratch and injury during the
process of uninstall.
1. Using a cross-head screwdriver unscrew six screws that secure rear cover to the TV monitor.
2. Pull down the plate screw cap and unscrew the six screws to remove the rear cover.
54 Meridian 4
3. Disconnect the cables and unscrew the screws that secure scaler board and power board to the main frame,
and remove the boards.
4. Unscrew the screws that secure IR board, speakers and main frame to the bezel, and remove the bezel.
Meridian 4 55
11. Trouble Shooting
This section describes commonly encountered issues and accompanying solutions.
General TV issues
Disconnect the power cable from the power outlet. Wait for one minute then reconnect it.
Check that the power cable is securely connected.
Check that the remote control batteries are correctly inserted according to the + / - orientation.
Replace the remote control batteries if they are flat or weak.
Clean the remote control and TV sensor lens.
Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power
cable. If the blinking reoccurs, contact Philips Consumer Care.
Enter ‘5351’.
TV channel issues
Check that the TV supports DVB-T or DVB-C in your country. See the listed countries on the back of the TV.
Picture issues
Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save
settings.
6. The picture does not fit the screen; it is too big or too small:
Picture signals from some devices may not fit the screen correctly. Check the signal output of the device.
Sound issues
Note: If no audio signal is detected, the TV automatically switches the audio output off — this does not
indicate malfunction.
Check that all cables are properly connected.
Check that the volume is not set to 0.
Check that the sound is not muted.
Check that a supported resolution and refresh rate is selected on the computer.
Set the TV picture format to unscaled.
Contact us
If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/support.
If the problem remains unresolved, contact Philips Consumer Care in your country as listed in this User Manual.
Warning:
Do not attempt to repair the TV yourself. This •may cause severe injury, irreparable damage to your TV or void your
warranty.
Note:
Make a note of your TV model and serial •number before you contact Philips. These numbers are printed on the
back of the TV and on the packaging
58 Meridian 4
12. ISP Instruction
For the procedure you will require:
1. A personal computer with web browsing capability.
2. An archive utility that supports the ZIP-format (e.g. WinZip for Windows or StuffIt for Mac OS).
3. Preferably empty USB memory stick.
Note: Only FAT/DOS-formatted portable memory is supported.
4. After TV AC on, TV will detect the F/W in the U-disk to upgrade automatically. During this process, it is forbid to
AC off TV and unplug the U-disk。TV will restart after upgrade.
5. Unplug the U-disk and restart TV.
6. Press “menu+1999+recall” by RC to open factory menu and check the software version as below figure. If the
version information is not the same as the F/W in U-disk, please redo upgrade.(Take 42pfl5300/t3 for example)
Meridian 4 59
13. White Balance, Luminance Adjustment
It is not necessary to adjust the white balance of this set.
Service Kit
Safety Checks
After the original service problem has been corrected,a complete safety check
should be made. Be sure to check over the entire set, not just the areas 6. New picture tubes are specifically designed to withstand higher operathng
where you have worked. Some previous servicer may have left an unsafe voltages without creating undesirable X-radiation. It is strongly
condition,which could be unknowingly passed on to your customer. Be sure recommended that any shop test fixture which is to be used with the new
to check all of the following: higher voltage chassis be equipped with one of the new type tubes
designed for this service. Addition of a permanently connected HV meter
Fire and Shock Hazard
to the shop test fixture is advisable. The CRT types used in these new
1. Be sure all components are positioned in such a way as to avoid the
sets should never be replaced with any other types, as this may result in
possibility of adjacent component shorts. This is especially important
excessive X-radiation.
on those chassis which are transported to and from the service shop.
7. It is essential to use the specified picture tube to avoid a possible X-diation
2. Never release a repaired unit unless all protective devices such as
problem.
insulators, barries, covers, strain reliefs, and other hardware have been
8. Most TV receivers contain some type of emergency "Hold Down" circuit to
installed in accordance with the original design.
prevent HV from rising to excessive levels in the presence of a failure
3. Soldering and wiring must be inspected to locate possible cold solder
mode. These various circuits should be understood by all technicians
joints,solder splashes,sharp solder points, frayed leads, pinched leads,
servicing them, especially since many hold down circuits are inoperative
or damaged insulation ( including the ac cord).Be certain to remove
as long as the receiver performs normally.
loose solder balls and all other loose foreign particles.
4. Check across-the-line components and other components for physical
Leakage Current Cold Check
evidence of damage or deterioration and replace if necessary. Follow
1. Unplug the ac line cord and connect a jumper between the two prongs of
original layout,lead length, and dress.
the plug.
5. No lead or component should touch a receiving tube or a resistor rated
2. Turn on the power switch.
at 1 watt or more. Lead tension around protruding metal surfaces or
3. Measure the resistance value between the jumpered ac plug and all
edges must be avoided.
exposed cabinet parts of the receiver, such as screw heads, antennas,
6. Critical components having special safety characteristics are identified
and control shafts. When the exposed metallic part has a return path to
with ans by the Ref. No. in the parts list and enclosed within a broken line
the chassis, the reading should be between 1 megohm and 5.2 megohms.
* (where several critical components are grouped in one area) along with
When the exposed metal does not have a return path to the chassis, the
the safety symbols on the schematic diagrams and/or exploded views.
reading must be infinity. Remove the jumper from the ac line cord.
7. When servicing any unit, always use a separate isolation transformer
for the chassis Failure to use a separate isolation transformer may
expose you to possible shock hazard, and may cause damage to
servicing instruments.
8. Many electronic products use a polarized ac line cord (one wide pin on
the plug.) Defeating this safety feature may create a potential hazard to
the service and the user. Extension cords which do not incorporate the
polarizing feature should never be used.
9. After reassembly of the unit, always perform an leakage test or resistance
test from the line cord to all exposed metal parts of the cabinet. Also check TO 0.15 uF WATER
all metal control shafts(with knobs removed), antenna terminals, handles, INSTRUMENTS PIPE
screws, etc. to be sure the unit may be safety operated without danger of EXPOSED
electrical shock.
EARTH
METAL PARTS GROUND
1500 ohm, 10W
* Broken line Leakage Current Hot Check
1. Do not use an isolation transformer for this test. Plug the completely
Implosion reassembled receiver directly into the ac outlet.
2. Connect a 1.5k, 10w resistor paralleled by a 0.15uf. capacitor between
1. All picture tubes used in current model receivers are equipped with an
each exposed metallic cabinet part and a good earth ground such as a
integral implosion system. Care should always be used, and safety
water pipe, as shown above.
glasses worn,whenever handling any picture tube. Avoid scratching or
3. Use an ac voltmeter with at least 5000 ohms volt sensitivity to measure
otherwise damaging the picture tube during installation.
the potential across the resistor.
2. Use only replacement tubes specified by the manufacturer.
4. The potential at any point should not exceed 0.75 volts. A leakage current
tester may be used to make this test; leakage current must not exceed
X-radiation
0.5 milliamps. If a measurement is outside of the specified limits, there is
1. Be sure procedures and instructions to all your service personnel cover
a possibility of shock hazard. The receiver should be repaired and
the subject of X-radiation. Potential sources of X-rays in TV receivers are
rechecked before returning it to the customer.
the picture tube and the high voltage circuits. The basic precaution which
5. Repeat the above procedure with the ac plug reversed.( Note: An ac
must be exercised is to keep the high voltage at the factory recommended
adapter is necessary when a polarized plug is used. Do not defeat the
level.
polarizing feature of the plug.)
2. To avoid possible exposure to X-radiation and electrical shock, only the
manufacturer's specified anode connectors must be used.
Picture Tube Replacement
3. It is essential that the service technician has an accurate HV meter
The primary source of X-radiation in this television receiver is the picture
available at all times. The calibration of this meter should be checked
tube. The picture tube utilized in this chassis is specially constructed to limit
periodically against a reference standard.
X-radiation emissions. For continued X-radiation protection, the replacement
4. When the HV circuitry is operating properly there is no possibility of an x-
tube must be the same type as the original, including suffix letter, or a Philips
radiation problem. High voltage should always be kept at the manufacturer's
approved type.
rated value-no higher - for optimum performance. Every time a color set is
serviced, the brightness should be run up and down while monitoring the
HV with a meter to be certain that the HV is regulated correctly and does Parts Replacement
not exceed the specified value. We suggest that you and your technicians Many electrical and mechanical parts in Philips television sets have special
review test procedures so that HV and HV regulation are always checked as safety related characteristics. These characteristics are often not evident from
a standard servicing procedure, and the reason for this prudent routine is visual inspection nor can the protection afforded by them necessarily be
clearly understood by everyone. It is important to use an accurate and obtained by using replacement components rated for higher voltage, wattage,
reliable HV meter. It is recommended that the HV recorded on each etc. The use of a substitute part which does not have the same safety
customer's invoice, which will demonstrate a proper concern for the characteristics as the Philips recommended replacement part shown in this
customer's safety. service manual may create shock, fire, or other hazards
5. When troubleshooting and making test measurements in a receiver with
a problem of excessive high voltage, reduce the line voltage by means of
a Variac to bring the HV into acceptable limits while troubleshooting. Do
not operate the chassis longer than necessary to locate the cause of the
excessive HV.
WARNING : Before removing the CRT anode cap, turn the unit OFF and short the HIGH VOLTAGE to the CRT DAG ground.
SERVICE NOTE : The CRT DAG is not at chassis ground.