Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Paint System
Surface preparation
All surfaces should be clean, dry and free from contamination. Cleanliness: Blast-cleaning to Sa 2½. Power tool cleaning to min. St 2 .
may be acceptable, subject to exposure conditions.
Application methods
Spray - Use airless spray
The compressed air supply used for blasting shall be free of water and oil. Adequate separators and traps shallprovided and these shall
be drained continuously.
Unpainted surface
Before painting , Machined surfaces such as shafts or flange faces will be sticky on masking tape to prevent paint penetration.
Drying time
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will beaffected correspondingly.
The figures given in the table are typical with:
* Good ventilation (Outdoor exposure or free circulation of air)
* Typical film thickness
* One coat on top of inert substrate