Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LAB. (8)
Active Band Pass Filter
The Active Band Pass Filter is slightly different in that it is a
frequency selective filter circuit used in electronic systems to
separate a signal at one particular frequency, or a range of signals
that lie within a certain “band” of frequencies from signals at all
other frequencies. This band or range of frequencies is set between
two cut-off or corner frequency points labelled the “lower
frequency” (ƒL) and the “higher frequency” (ƒH) while attenuating
any signals outside of these two points.
1
Communication Fundamentals Lab. Dijlah University College
Second Stage Assist. Lecturer: Marwa Maki
2
Communication Fundamentals Lab. Dijlah University College
Second Stage Assist. Lecturer: Marwa Maki
Procedure:
1. Connect the following circuit ( HPF+LPF),
3
Communication Fundamentals Lab. Dijlah University College
Second Stage Assist. Lecturer: Marwa Maki
2. Vin=10 V p-p,
3. List the following measurements,
F(Hz) Vo (p-p)
5
10
30
100
1000
2000
3000
5000
10000